For more information on Legend Vinyl Gate Kits, contact your local Master Halco

distribution center: 888-643-3623

MasterHalco.com

INTRODUCING OUR INNOVATIVE VINYL GATE DESIGN

Our innovative Legend vinyl gate design features both strength and style! Legend gates pocket design creates a gate that:• Will not sag! It's as strong as a metal frame gate without

the additional weight. • Are tested to withstand openings of more than 20,000 swings• Stays square without the need for additional bracing. • Includes premium quality hardware — self-closing hinges

with polymer covers, gate stop and latch plate.

We guarantee our gate and hardware will last and back that up with a transferable limited lifetime warranty — one of the best in the industry!

Our new pocket design eliminates weak, unsightly welded corners!

Branch service centers are located throughout North America.

51012138N00127

• Easy-to-assemble and install• Pre-installed rail pockets enabling faster

installation and instant squaring • Welded corners replaced with clean corner pocket

make the gate design attractive AND durable • Rails are double reinforced in pocket with

vinyl fence cement and 6" self-tapping screws• Gate widths easily modified (kit configuration only)

• Privacy gates are rackable with modifications up to 8"

Check out our video tutorials on our YouTube Channel: YouTube.com/c/MasterHalcoFencing

WHY LEGEND VINYL GATES ARE THE #1 CHOICE FOR CONTRACTORS

Legend Vinyl Gates will not sag.

By using these tips and following the provided instructions, Legend Gates will match or outperform any gate on the market.1. Use vinyl cement in rail pocket

for chemical bonding of materials.

2. Use supplied screws to complete assembly and achieve maximum strength.

3. During installation, attach supplied hinges to upright in line with horizontal rails and into the rail pocket materials. This will guarantee against gate sagging.

Proper Assembly + Installation = MAXIMUM STRENGTH

1 2

3