Internationalenglish 2014 11 1

Accessories andconsumables

144

11

Suction HosesTh e hose is the conveying line of the source extraction installation. Th e demands placed on the suction hose are:– wear resistance– low weight and fl exibility– not aff ected by extremes of temperatures– crushproof– does not give static electric shocks

When long suction hoses have to be used their diameter should progressively increase from the suction casing, with the smallest hose nearest the suction casing not exceeding 2–3 m length. Coupling is carried out with external couplings which are easy to use.

Description Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion UV and zone Resistance to Resistance to

(in/mm) Temp °C max/min resistance resistance Welding Fume solvent and oil

Suction hoses standard 3”/76 mm 2001 Blue PE 140/–22/+60/–30 No 2 2 3 3

2”/50 mm 2401 Blue PE 140/–22/+60/–30 No 2 2 3 3

1.5”/38 mm 2111 Blue PE 140/–22/+60/–30 No 2 2 3 3

1.25”/32 mm 2112 Blue PE 140/–22/+60/–30 No 2 2 3 3

1”/25 mm 2113 Blue PE 140/–22/+60/–30 No 2 2 3 3

Suction hoses heat resistant 2”/50 mm 2004 Grey PP(EPDM) 194/–40/+90/–40 No 3 2 1 4

1.5”/38 mm 2003 Grey PP(EPDM) 194/–40/+90/–40 No 3 2 1 4

Suction hoses antistatic 3”/76 mm 2024 Black PE 140/–4/+60/–20 Yes 2 2 3 3

2”/50 mm 2013 Black PE 140/–4/+60/–20 Yes 2 2 3 3

1.5”/38 mm 2012 Black PE 140/–4/+60/–20 Yes 2 2 3 3

1.25”/32 mm 2005 Black PE 140/–4/+60/–20 Yes 2 2 3 3

1”/25 mm 2025 Black PE 140/–4/+60/–20 Yes 2 2 3 3

Suction hoses PU 3”/76 mm 2056 Trans- PU 194/–40/+90/–40 Yes** 1 1 3 1

2”/50 mm 2054 parent PU 248/–40/+120/–40 Yes** 1 1 3 1

1.5”/38 mm 2055 PU 194/–40/+90/–40 Yes** 1 1 3 1

Super D superelastic 2”/50 mm 2039 black/white PVC 185/–23/+85/–5 No 2 2 2 4

1.5”/38 mm 2038 black/white PVC 185/–23/+85/–5 No 2 2 2 4

Scale: 1 Excellent

2 Good

3 Limited

4 Poor

Ø designates the inside of the hose

Suction hoses, antistatic, Ø (in/mm) Part no/m Standard length

3”/76 2024* 32.8 yd/30 m

2”/50 2013* 32.8 yd/30 m

1.5”/38 2012* 32.8 yd/30 m

32 2005* 32.8 yd/30 m

25 2025* 32.8 yd/30 m

Suction hoses PU, extra abrasion resistant, Ø (in/mm) Part no/m Standard length

3”/76 2056** 15’, 30’ / 5 and 10 m

2”/50 2054** 15’, 30’ / 5 and 10 m

1.5”/38 2055** 15’, 30’ / 5 and 10 m

Suction hoses PU, extra abrasion resistant, Ø (in/mm) Part no/m Standard length

2”/50 2039 50’/15 m

1.5”/38 2038 50’/15 m

Suction hoses, standard, Ø (in/mm) Part no/m Standard length

3”/76 2001 16.4 yd/15 m

2”/50 2401 32.8 yd/30 m

1.5”/38 2111 32.8 yd/30 m

1.25”/32 2112 32.8 yd/30 m

1”/25 2113 32.8 yd/30 m

Suction hoses, heat resistant, Ø (in/mm) Part no/m Standard length

2”/50 2004 15’, 30’, 50’/5, 10, 15 m

1.5”/38 2003 15’, 30’, 50’/5, 10, 15 m

Material properties

Antistatic is defi ned as having a conductivity of < 10 6 Ω

To order antistatic certifi cation (ESD) according to Swedish National Testing and Research Institute

(SP) – note an E after the part no.

** The wire helix must be bared and left in contact with conductive material for static discharge.

PU, extra abrasion

resistant

Antistatic

Heat resistant

Standard

For larger dimensions, contact us.

145

11

11

Suction Hoses

Metal Hose

Description dmin

dmax

Part No

Hose clamp .3”–.6”/8–14 mm 4027

Hose clamp .4”–.7”/11–17 mm 4028

Hose clamp .6”–.9”/15–24 mm 4146

Hose clamp 1”–1.5”/26–38 mm 4197

Hose clamp 1.7”–2.2”/44–56 mm 4075

Hose clamp 2”–2.6”/50–65 mm 4219

Hose clamp 2.3”–3”/58–75 mm 4002

Hose clamp 2.7”–3.3”/68–85 mm 3002

Hose clamp 3”-3.7”/77–95 mm 4090

Hose clamp 3.4”–4.4”/87–112 mm 4310

Hose clamp 4.1”–5.4”/104–138 mm 4138

Hose clamp 5.1”–6.5”/130–165 mm 4040

Hose clamp 5.9”–7.1”/150–180 mm 4137

Hose clamp 7.9”–9.1”/200–231 mm 4464

Hose clamp 8.9”–10.1”/226–256 mm 4102

Ø (in/mm) Part No Temp °F max /Temp °C max Material

2”/50 2150 Flexible 572/+300 Steel

2”/50 2151 Rigid 572/+300 Steel

1.5”/38 2138 Flexible 572/+300 Steel

1.5”/38 2139 Rigid 572/+300 Steel

Diameter Description Part No

Øinv

3/4” Compressed air hose 3/4 2124

Øinv


Øinv


Øutv

5 mm Compressed air hose 5 2406

Øutv


Øutv


Compressed Air Hose

Ventilation HoseDiameter (in/mm) Description Part No

Ø 5”/125 Ventilation hose 4.9”/125 2420

Ø 10”/250 Ventilation hose 10”/250 2032

Hose Clamps

146

11Suction Hoses

kPa/m p

2,5

2,0

1,5

1,0

0,5

0 Q

0 100 200 300 400 m3/h

Ø 25Ø 32

Ø 38

Ø 50

7438

2010

20457421

7437

2011

203374207411013031ø108

7423013045

ø76 3007 7419

2056

2046 7436

X160

X160

X160

ø159

kPa/m

1,0

0,8

0,6

0,4

0,2

00 1000 2000 3000 4000 m3/h

Ø 76

Ø 102

Ø 152

Q

p


Pressure Loss Suction Hoses

Rubber Suction Hose Couplings for Rubber Suction Hose/Extra Abrasion Resistant

Ø (in/mm) Part No Standard Part No Extra Abrasion Resistant

6”/152 2045 -

4”/102 2011 -

3”/76 See PU-suction hose 2046

ø76

Tube L=100 mm

TECHNICAL DATA

Part No 2011 2046 2045

Material gauge (in/ mm) 0.33/8.5 0.31/8 0.37/9.5

Min radius (in/mm) 11.81/300 8.27/210 18.9/480

Weight (lbs/yd /kg/m) 9.15/4.15 6.55/2.97 15.54/7.05

Temp max (°F /°C) 140/+60 140/+60 140/+60

min (°F /°C) –13/-25 –13/-25 –13/-25

Internal tube PVC PVC PVC

Insert steel helix steel helix steel helix copper wire

External tube Polyester Polyester Polyester

Hose Hanger

Description Part No

Hose Hanger, white enamel 4473

Hose Hanger, stainless 7214

Part No Description

3007 Joint Ø 3”/76

3031 Joint Ø 4.3”/108

3045 Joint Ø 6.3”/160

741101 Pipe connection 4.3”/4”/108/102

7419 Hose clamp 3”/76

7420 Hose clamp 4”/102

7421 Hose clamp 6.3”/160

742301 Pipe connection 6.3”/6”/159/152

7436 Hose connector 3”/X6.3”/76/X160



147

11

11

Suction Hoses

X 2”/50

Ø 2”/50

2129

2129

X 1.5”/38

2114

2133

Ø 2”/50

Ø 2”/50

Ø 1.5”/38

Ø 1.25”/32

2131 Ø 1.5”/38

2129

2114

2132

2114

2132

Ø 2”/50

Ø 1.5”/38

Ø 1.25”/32

Ø 1.5”/38

Ø 1.25”/32

2128

Ø 1.25”/32

2171

X 2”/50

Ø 3”/76

Ø 2”/50

X 1.5”/38

2008

2107

2108

Ø 3”/76 2100 Ø 2”/50

Ø 2”/50 2403/2170 Ø 2”/50 2120 Ø 1.5”/38

Ø 1.5”/38 2118/2169 Ø 1.5”/38 2121 Ø 1.25”/32

Ø 1.25”/32 2119/2168 Ø 1.25”/32 2101 Ø 1”/25 2117/2167

Ø 1”/25

2106

2110

2116

Ø .7”/17

Ø 1”/26

Ø 1.25”/32

2109

2107

Ø 1”/26

Ø 1.5”/38

Ø 2”/50

2115

2115

see above

Turnable Hose Connectors

Part No Description2008* Coupling socket 3”/2”/76/50 mm

2100* Intermediate sleeve 3”/2”/76/50 mm

2101* Intermediate sleeve 1.25/1”/32/25mm

2106* Connecting sleeve 7”/1.25”/17/32 mm

2107* Coupling socket 2”/2”/50/50 mm

2108* Coupling socket 2”/1.5”/50/38 mm

2109* Connecting sleeve 1”/1.5”/26/38 mm

2110* Connecting sleeve 1”/1.25/26/32 mm

2115* Connecting sleeve 1.5”/1.5”/38/38 mm

Part No Description2116 Connecting sleeve 1.25/1.25”/32/32 mm

2117 Connecting sleeve 1”/1”/25/25 mm

2118 Hose connector 1.5”/38 mm

2119 Hose connector 1.25”/32 mm

2120* Intermediate sleeve 2”/1.5”/50/38 mm

2121* Intermediate sleeve 1.5/1.25/38/32 mm

2167* Connecting sleeve 1”/1”/25/25 mm

2168* Hose connector 1.25”/32 mm

COUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE

Non-Turnable Hose Connectors

Part No Description2132* Connecting sleeve, turnable 1.25”/1.5/32/38 mm

2133* Coupling socket, turnable 1.5”/1.25”/38/32 mm

2171* Coupling socket, turnable 1.25”/1.25/32/32 mm

Part No Description2169* Hose connector 1.5”/38 mm

2170* Hose connector 2”/50 mm

2403 Hose connector 2”/50 mm

COUPLING SOCKET HOSE CONNECTOR CONNECTING SLEEVEINTERMEDIATE SLEEVE

* Antistatic.106 Ω cm. Please see our antistatic acces-sories from page 158 onwards.

Part No Description2114* Connecting sleeve, turnable 1.5”/1.5”/38/38 mm

2128* Coupling socket, turnable 2”/1.5”/50/38 mm

2129* Coupling socket, turnable 2”/2”/50/50 mm

2131* Intermediate sleeve, turnable 2”/1.5”/50/38 mm

148

11Suction Hoses

Ø 2”/50

2158

2158

2157

Ø 2”/50

Ø 2”/50

Ø 1.5”/38

2160 Ø 1.5”/38

Ø 2”/50

Ø 1.5”/38

Ø 1.5”/38

2158

2159

2159

X 2” /50

Turnable Connectors for Suction Hose; PUCOUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE

Ø 2”/50

Ø 1.5”/38

21292158

21282157

2166

2114

2159

2133

Ø 1.5”/38

Ø 1.25”/32

Extraction Hose Quick CouplersPart No 2166

Part No Description2160* Intermediate sleeve Ø 2”/1.5”/50/38 mm PU, turnable

2161* Coupling socket Ø 3”/2”/76/50 mm, EPDM

2162* Coupling socket Ø 3”/2”/76/50 mm, Nitrile

* Antistatic; Please see our antistatic accessories from page 158

onwards.

Ø 3”/76

2161

2162

Ø 2”/50

Ø 2”/50

Non-Turnable Connectors for Suction Hose; PUPart No Description

2157* Coupling socket Ø 2”/1.5”/50/38 mm PU, turnable

2158* Coupling socket Ø 2”/2”/50/50 mm PU, turnable

2159* Connecting sleeve Ø 1.5”/1.5”/38/38 mm PU, turnable

see above

see above

Multi Connection for Integrated Suction CasingsPart No 42497

Part No Description

42497* Multi connection for intergrated suction casings

2114* Connecting sleeve, turnable 38/38

2115* Connecting sleeve 38/38

*Antistatic EPDM

424972114

2115Ø 1.5”/38

The multi connection fi ts onto suction casings with outlet diameter 25-35 mm. Cut

off a section at the right diameter (it’s marked in advance with: 25, 27, 29, 31, 33, 35 mm)

and push on to the multi connection over the tubing of integrated suction casings.

Connection sleeves 2114 or 2115 then fi t to the other end to link the hose.

149

11

11

Suction Hoses

Ø 2”/50 Ø 1.5”/38

Ø 2”/50 Ø 1.5”/38

Ø 1.5”/38

Ø 1.5”/38

6’/15’/2/5 m

6’/2 m

15’5 m 6’/2 m

6’/2 m15’5 m

Hose Sets

Standard suction hose, turnable

intermediate sleeve 2”/1.5”/50/38

Part No Description2125 Hose set 2”/1.5”/50/38 mm

L = 21’/7 m

2126 Hose set 2”/1.5”/50/38 mm

L = 15’ /5 m antistatic

2006 Hose set 1.5”/38 mm

L = 6’/2 m

2015 Hose set 1.5”/38

L = 6’/2 m

2105 Hose set 1.5”/38

L = 15’*/5 m*



Antistatic suction hose, turnable




Connects to Ø 1.5”/38

suction casing

Connects to Ø 2”/50

suction hose

* Standard suction hose, turnable, non removable connector. (Replacement to standard hose kit.)

*Antistatic is defi ned as having a conductivity of < 106 ΩAntistatic certifi cation (ESD-rated) – please see our antistatic accessories from page 158 onwards. Tested according to Swedish National Testing and Research Institute (SP).** Static conductivity can be compromised by excessive hose wear.

Technical Data on Extaction Hose FittingsDescription Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion resistance UV and zone Resistance to Resistance to

(in/mm) Temp °C max/min resistance Welding Fume solvent and oil

Coupling socket 3”/2”/76/50 2008* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/2”/50/50 2107* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/1.5”/50/38 2108* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

3”/2”/76/50 (PU)** 2161* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Coupling socket 3”/2”/76/50 2162* Blue NBR 248/-76/120/-60 Yes 2 3 3 2

Coupling socket 2”/2”/50/50 2129* Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/2”/50/50 (PU)** 2158* Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 (PU)** 2157* Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 2128* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.25”/38/32 2133* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.25”/1.25”/32/32 2171* Black PA12 284/-4/140/-20 Yes 1 2 3 1

Connecting sleeve 1.25”/1.5”/32/38 2132* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 (PU)** 2159* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 2114* Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/2”/50/50 2129* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1”/1”/25/25 2167* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 2115* Black PA12 284/-4/140/-20 Yes 1 2 3 1

Connecting sleeve 1”/1.5”/26/38 2109* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1”/1.25”/26/32 2110* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

.7”/1.25”/17/32 2106* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Connecting sleeve 1.25”/1.25”/32/32 2116 Grey PE 45/-45 No 1 2 3 1

1”/1”/25/25 2117 Grey PE 45/-45 No 1 2 3 1

Inter, sleeves 2”/1.5”/50/38 2131* Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 (PU)** 2160* Black PA12 284/-4/140/-20 Yes 1 2 3 1

Inter, sleeves 3”/2”/76/50 2100* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/1.5”/50/38 2120* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1.5”/1.25”/38/32 2121* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1.25”/1”/32/25 2101* Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Hose connector 2”/50 2403 Grey PE 45/-45 No 2 2 3 3

1.5”/38 2118 Grey PE 45/-45 No 2 2 3 3

1.25”/32 2119 Grey PE 45/-45 No 2 2 3 3

Hose connector 2”/50 2170* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/38 2169* Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.25”/32 2168* Black PA12 284/-4/140/-20 Yes 1 2 3 1

Scale: 1 Excellent 2 Good

3 Limited 4 Poor

150

11Suction Hoses

2048

72937294

7292

7358

7464

7399

About Cleaning AccessoriesFor the best results when cleaning, it is necessary to have the right equipment and to use it in the correct way. It is therefore a prerequisite that a variety of diff erent accessories are available for diff erent tasks. 1.25”/32 mm cleaning accessories are recommended when very light tools are required e.g.: offi ce cleaning. 1.5”/38 mm cleaning tools are ideal in most cases, they combine good capacity with ease of handling. Everything is available, from light tools such as wands in aluminium and tools in plastic and rubber to sturdy wear resistant wands in steel and cast aluminium fl oor tools. 2”/50 mm cleaning accessories are used for very heavy cleaning. Aluminium wands, large wheels on the fl oor tools and the ERGO-grip are several of the details which allow the accessories to be used easily despite their size. 3”/76 mm accessories are used for diff erent types of material transport.

Part No Description

2048 Hose set L=24’/8 m w hand pipe

7292 Suction brush 1.25”/32 mm

7293 Floor Tool 10.5/270 mm P-1.25”/32 mm

7294 Chromed Wand 1.25”/32 mm telescopic

7358 Suction brush 1.25”/32 mm

7399 Flat nozzle, 1.25”/32 mm

7464 Rectangle brush 1.25”/32 mm

TECHNICAL DATA

Qnom

90 cfm/150 m3/h

pnom

28 inwg/7 kPa

Cleaning Accessories Ø 1.25”/32 mm

151

11

11

Cleaning Accessories

70387047

7048 7049

7276 7291 73657264

7257 7258 7259

72607261

7035

72137376

7262

7235 72367321

73227323

7278

7275 7263

7297

7300

7374 7398


* Antistatic. Please see our antistatic accessories from page 158 onwards.

Part No Description

7035 Chrome Steel hand pipe Ø 1.5”/38 mm, straight

7038 Suction Nozzle Ø 1.5”/38 mm

7047 Suction Brush B 8”/200 mm

7048 Pipe Nozzle RB 4”/100 mm

7049 Pipe Nozzle RB 8”/200 mm

7213 Chrome Steel Flat Nozzle Ø 1.5”/38 mm L= 16”/400 mm

7235* Cast Alu Floor Tool B 15”/370 mm Ø 1.5”/38 mm

7236* Cast Alu Floor Tool B 18”/450 Ø 1.5”/38 mm

7257* Chrome Steel Wand Ø 1.5”/38 mm

7258* SLightweight Alu Wand Ø 1.5”/38 mm

7259* Lightwieght Alu Wand Ø 1.5”/38 mm, with wear strip

7260 Chrome Steel Wand Extension Ø 1.5”/38 mm, L = 715 mm

7261* Alu Wand Extension Ø 1.5”/38 mm, L = 705 mm

7262 Chrome Steel hand pipe Ø 1.5”/38 mm curved

7263 Brush for 7275, 7278

7264* Tapered nozzle Ø 1.5”/38 mm

7275 Rubber part of suction brush Ø 1.5”/38 mm, 7278

7276* Tapered nozzle Ø 1.5”/38 mm

7278 Suction brush Ø 1.5”/38 mm

7291 Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm plastic

7297* Crevice nozzle Ø 1.5”/38 mm, B= 8”/200 mm

7300 Rubber fl oor tool Ø 1.5” /38 mm

7320 Molded Plastic Floor Tool 12.5”/320 mm Ø 1.5”/38 mm,with rubber wiper

7321 Molded Plastic Floor Tool 12.5”/320 mm Ø 1.5”/38 mm, with brush

7322 Molded Plastic Floor Tool 12.5”/370 mm Ø 1.5”/38 mm, with rubber wiper

7323 Molded Plastic Floor Tool 12.5”/370 mm Ø, 1.5”/38 mm, with brush

7365* Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm, Antitstatic

7374* Brush ESD for 7278E, 7279E

7376 Push-Pull Pistol

7398 Brush for 7278, 7279, hard, white

TECHNICAL DATA

Floor nozzle;

Light applications

Qnom

120 cfm/200 m3/h

pnom

20 inwg/5 kPa

Heavy applications

Qnom

150 cfm/250 m3/h

pnom

32 inwg/8 kPa

Hand Nozzle;

Qnom

150 cfm/250 m3/h

pnom

12 inwg/3 kPa

152

11Cleaning Accessories

72667267

72687269

7377

7033

7295

7212

7271

7265

7285

7013

7277

7279

7238

7281

7016

7030

7307

7274

7263

7149

7374 73987147

Cleaning Accessories Ø 2”/50 mm

* Antistatic; Please see our antistatic accessories from page 158 onwards.

Part No Description

7013 Rubber part, fl oor tool Ø 2”/50 mm

7016 Suction nozzle with brush

7026 Saw blade

7030 Suction nozzle Ø 2”/50 mm

7033 Chrome Steel Hand pipe Ø 2”/50 mm

7147 Brush for 7016

7149 Chip nozzle D 50 W 70 L 243

7212 Chrome Stell Flat toolØ 2”/50 mm L=16”/400 mm

7238* Cast Alu Floor Tool B 20”/500 mm A--2”/50 mm

7263 Brush for 7274, 7279

7265 Chrome Steel Wand Ø 2”/50 mm

7266 Alu Lightweight Wand Ø 2”/50

7267 Alu Lightweight Wand Ø 2”/50 mm, wear st

7268 Chrome Steel Wand ext Ø 2”/50 mm, L = 710 mm

7269 Alu Wand Extension Ø 2”/50 mm, L = 685 mm

7271 Chrome Steel hand pipe Ø 2”/50 mm curved

7272 Tapered nozzle Ø 2”/50 mm

7274 Rubber part, suction brush Ø 2”/50 mm

7277* Tapered nozzle Ø 2”/50 mm

7279* Suction brush Ø 2”/50 mm

7281* Floor nozzle Ø 2”/ 50 mm B 8”/200 mm

7285 Handle ERGO-Grip

7295 Bulk nozzle Ø 2”/50 mm

7307 Gulper Floor Tool Alu

7374* Brush ESD for 7278E, 7279E

7377 Push Pull Pistol

7398 Brush for 7278, 7279, hard, white

ERGO-Grip for better handling, fi ts on all the 2”/50 mm wands and Bulk Nozzle 2”/50 mm.

TECHNICAL DATA

Floor nozzle;

Qnom

210 cfm/350 m3/h

pnom

32 inwg/8 kPa

Hand Nozzle;

Qnom

210 cfm/350 m3/h

pnom

12 inwg/3 kPa

153

11

11


71267162

7127

7129

7161


Part No Description

7126 Clamp for scraper

7127 Scraper for suction lance

7129 Handle complete

7161 Bulk nozzle Ø 3”/76

7162 Suction lance Ø 3”/76

154

11Cleaning Accessories

F

D

AB

C

E

E, D

A, B, C

H

D FMFS 5x12

A B

C

E

G

E, D

A, B, C

7115

7146

7046

7116

7108

I

J

Gulper Floor Tool Ø2”/50 mm, Alu

Molded Plastic Floor Tools Ø1.5”/38 mm

B = 12.6” /320 mm B = 14.6 ”/370 mm Set 7320 7321 7322 7323

A Rubber band B 316/288 (2 pcs) 7328 x – 7329 x –

B Front brush 7225 – x 7226 – x

C Rear brush 7326 – x 7327 – x

D Brush holder 7215 x x 7216 x x

E Brush holder 7324 x x 7325 x x

F Wheel, fl oor nozzle P 40455 x x 40455 x x

Cast Alu Floor Tools Ø1.5”/38 mm, Ø2”/50 mm

Ø 1.5”/38 mm Ø 2”/50 mm B = 14.6”/370 mm B = 17.7” /450 mm B = 19.7” /500 mm Set 7235 7236 7238

A Rubber band* (2 pcs) 7045 x 7014 x 7051 x

B Front brush 7222 – 7223 – 7224 –

C Rear brush 7225 – 7228 – 7227 –

D Brush holder 7216 x 7218 x 7219 x

E Brush holder 7215 x 7217 x 7218 x

F Cover 370 A 7242 x 7243 x 7244 x

G Wheel, fl oor nozzle A 7252 x 7252 x 7252 x

H Clampl 7239 x 7240 x 7241 x

I Adjusting screw 7253 x 7253 x 7253 x

J Coned connection, antistatic 7335 x 7335 x 7245 x

B = 15.7”/400 mm B = 17.7”/450 mmSet 7307

Rubber moulding (2 pcs) 7108 x

Brush B 450/420 7046 x

Brush holding moulding 7115 x

Brush holding moulding 7116 x

Wheel kit 7146 x

* Also by the metre, Part No 7058 (50 m)

Spare Parts for Floor Tools

x = standard- = can be changed

155

11

11


4149 7148

6098

7150

6005

6610

6616

Part No Description Connection (Ø) (in/mm)

4149 Suction nozzle 2”/50

6005 Universal nozzle 1.5”/38

6098 Tubular nozzle 1.5”/38

6610 Universal nozzle 1.5”/38

6616 Universal nozzle Ø 50 2”/50

7148 Funnel shaped nozzle Ø 50 2”/50

7150 Magnetic holder for 7148, 4149 2”/50

TECHNICAL DATA

Part No Qnom pnom

4149 150 cfm/250 m3/h 6.4inwg/1.6 kPa

6005 90 cfm/150 m3/h 6.4inwg/1.6 kPa

6098 90 cfm/150 m3/h 15.2 inwg/3.8 kPa

6010 90 cfm/150 m3/h 6.4inwg/1.6 kPa

6616 250 m3/h 6.4inwg/1.6 kPa

7148 150 cfm/250 m3/h 6.4inwg/1.6 kPa

9060 90 cfm/150 m3/h 10.8 inwg/2.7 kPa

Welding Accessories/Extraction Nozzles

156

11Welding Accessories

Part No Description Volume/ Capacity Picture DC 1800* DC 2900a DC 3800a/i DC 5900a/i Comments Height

42278-70 Container 20 l/5 gal 40 kg/90 lbs X Is delivered complete with wheels

285 mm undercarriage and fasteners.

40070 Container 40 l/10.5 gal 60 kg/130 lbs X* X X –

402 mm

40409 Container with sight glass 40 l/10.5 gal 60 kg/130 lbs X* X X Steel container with sight glass and

402 mm knockout for drain tap.

40624 Container, stainless 40 l/10.5 gal 60 kg/130 lbs X* X X Stainless steel container for liquids.

402 mm

40412 Container with sight glass 60 l/15.5 gal 60 kg/130 lbs X* (X)** (X)** X Steel container with sight glass and

685 mm knockout for drain tap. The cyclone must

be raised to a higher mounting point with

the above kit.

42369 Basket for plastic bag X Ensures that the bag can’t get around the

fi lter when the machine is used for light

material.

4119 Drain tap 40/60 l X X X X The drain tap is mounted on the 40 l with

sight glass. R 1/2”

40410 Bottom screen 40/60 l X X X X For fl uid separation; The bottom screen is

installed in the bottom and the drain tap

is mounted on the container, 40/60 l.

40401 Carrying handles 40 l X X X X Heavy duty carrying handles are installed

in place of the standard locking hooks. For

40 l containers.

7313 Emptying car 40/60 l X X X X Emptying cart for easy handling of the

container.

42078 Lifter kit 60 l X When the 60 l container is to be used, the

cyclone must be raised on the

units chassis.

7368 Container 75 l/19.5 gal X

7249 Container with sight glass 90 l/23.5 gal 150 kg/330 lbs X The cyclone is mounted in the higher

700 mm mounting position and the bottom cone

is changed.

7314 Container with sight glass, 90 l/23.5 gal 150 kg/330 lbs X The cyclone is mounted in the higher

drain tap and bottom screen 700 mm mounting position and the bottom cone

is changed.

7248 Emptying cart 90 l X The cart for handling of the 90 l container

can also be handled with a fork lift. The

container is rotated for emptying.

42079 Bottom cone kit , 90 l, X When the 90 l container the cyclone must

incl extension hose be mounted at a higher position on the

chassis and the bottom cone changed.

7315 Crane hook 90 l X The crane hook is mounted securely on

the 90 l container. The container can be

rotated for emptying in the elevated

position.

Containers and Accessories Mobile Dust Extractors

* Max 90 lbs/40 kg when fi tted to a DC 1800** Fits to the cyclone but not to the standard chassis 157

11

11

Containers and Accessories

Description Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion UV and zone Resistance to Resistance to

(in/mm) Temp °C max/min resistance resistance Welding Fume solvent and oil

Suction hoses antistatic 3”/76 mm 2024E Black PE 113/–40/+45/–40 Yes 2 2 3 3

2”/50 mm 2013E Black PE 113/–40/+45/–40 Yes 2 2 3 3

1.5”/38 mm 2012E Black PE 113/–40/+45/–40 Yes 2 2 3 3

1.25”/32 mm 2005E Black PE 113/–40/+45/–40 Yes 2 2 3 3

1”/25 mm 2025E Black PE 113/–40/+45/–40 Yes 2 2 3 3

Scale: 1 Excellent

2 Good

3 Limited

4 Poor


Technical Data on Suction Hoses, Antistatic

Suction hoses, antistatic, Ø (in/mm) Part No/m Standard length

3”/76 2024E 30’/10 m

2”/50 2013E 15’, 30’, 50’/5, 10, 15 m

1.5”/38 2012E 15’, 30’, 50’/5, 10, 15 m

1.25”/32 2005E 15’, 30’, 50’/5, 10, 15 m

1”/25 2025E 15’, 30’, 50’/5, 10, 15 m

Antistatic Accessories - ESD certifi cationAccessories with antistatic certifi cation (ESD) according to Swedish National Testing and Research Institute (SP). ESD-protected accessories prevent a risk of ignitionof explosive gases or powders, or of items such as fi reworks. Antistatic is defi ned as having g a conductivity of < 10 6 Ω.

Measured values to ground connection, should be less than 106 Ohm as stated by clause 11 in CENELEC TR 50404:2003, and the measured resistances should be less than 109 Ohm as stated according to sub-clause 7.4.3 a, in EN 60079-0:2009 and 4.2 in CENELEC TR 50404:2003.

• Better fl exibility.• Smoother on the inside for improved air fl ow • Th e conductivity is as good as the previous hose.• Longer life time.• Heat tolerance < 60 degree C

Suction Hoses, antistatic

Multi Connection for Integrated Suction CasingsPart No 42497

Part No Description

42497* Multi connection for intergrated suction casings

2114* Connecting sleeve, turnable 38/38

2115* Connecting sleeve 38/38

*Antistatic EPDM

42497E2114

2115Ø 1.5”/38

The multi connection fi ts onto suction casings with outlet diameter 25-35 mm. Cut

off a section at the right diameter (it’s marked in advance with: 25, 27, 29, 31, 33, 35 mm)

and push on to the multi connection over the tubing of integrated suction casings.

Connection sleeves 2114 or 2115 then fi t to the other end to link the hose.

158

11Antistatic Accessories

X 2”/50

Ø 2”/50

2129E

2129E

X 1.5”/38

2114E

2133E

Ø 2”/50

Ø 2”/50

Ø 1.5”/38

Ø 1.25”/32

2131E Ø 1.5”/38

2129E

2114E

2132E

2114E

2132E

Ø 2”/50

Ø 1.5”/38

Ø 1.25”/32

Ø 1.5”/38

Ø 1.25”/32

2128E

Ø 1.25”/32

2171E

X 2”/50

Ø 3”/76

Ø 2”/50

X 1.5”/38

2008E

2107E

2108E

Ø 3”/76 2100E Ø 2”/50

Ø 2”/50 2170E Ø 2”/50 2120E Ø 1.5”/38

Ø 1.5”/38 2169E Ø 1.5”/38 2121E Ø 1.25”/32

Ø 1.25”/32 2168E Ø 1.25”/32 2101E Ø 1”/25 2167EØ 1”/25

2106E

2110E

Ø .7”/17

Ø 1”/26

2109E

2107E

Ø 1”/26

Ø 1.5”/38

Ø 2”/50

2115E

2115E

see above

Turnable Hose Connectors

Part No Description2008E Coupling socket 3”/2”/76/50 mm

2100E Intermediate sleeve 3”/2”/76/50 mm

2101E Intermediate sleeve 1.25/1”/32/25mm

2106E Connecting sleeve 7”/1.25”/17/32 mm

2107E* Coupling socket 2”/2”/50/50 mm

COUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE

Non-Turnable Hose Connectors

Part No Description2132E Connecting sleeve, turnable 1.25”/1.5/32/38 mm

2133E Coupling socket, turnable 1.5”/1.25”/38/32 mm

2171E Coupling socket, turnable 1.25”/1.25/32/32 mm

COUPLING SOCKET HOSE CONNECTOR CONNECTING SLEEVEINTERMEDIATE SLEEVE

Part No Description2114E Connecting sleeve, turnable 1.5”/1.5”/38/38 mm

2128E Coupling socket, turnable 2”/1.5”/50/38 mm

2129E Coupling socket, turnable 2”/2”/50/50 mm

2131E Intermediate sleeve, turnable 2”/1.5”/50/38 mm

Part No Description2108E Coupling socket 2”/1.5”/50/38 mm

2109E Connecting sleeve 1”/1.5”/26/38 mm

2110E Connecting sleeve 1”/1.25/26/32 mm

2115E* Connecting sleeve 1.5”/1.5”/38/38 mm

2120E Intermediate sleeve 2”/1.5”/50/38 mm

Part No Description2121E Intermediate sleeve 1.5/1.25/38/32 mm

2167E Connecting sleeve 1”/1”/25/25 mm

2168E Hose connector 1.25”/32 mm

2169E Hose connector 1.5”/38 mm

2170E Hose connector 2”/50 mm

159

11

11

Antistatic Accessories

Ø 2”/50

2158E

2158E

2157E

Ø 2”/50

Ø 2”/50

Ø 1.5”/38

2160E Ø 1.5”/38

Ø 2”/50

Ø 1.5”/38

Ø 1.5”/38

2158E

2159E

2159E

X 2” /50

Turnable Connectors for Suction Hose; PUCOUPLING SOCKET INTERMEDIATE SLEEVE CONNECTING SLEEVE

Ø 3”/76

2161E

2162E

Ø 2”/50

Ø 2”/50

Non-Turnable Connectors for Suction Hose; PUPart No Description

2157* Coupling socket Ø 2”/1.5”/50/38 mm PU, turnable

2158* Coupling socket Ø 2”/2”/50/50 mm PU, turnable

2159* Connecting sleeve Ø 1.5”/1.5”/38/38 mm PU, turnable

2160* Intermediate sleeve Ø 2”/1.5”/50/38 mm PU, turnable

2161* Coupling socket Ø 3”/2”/76/50 mm, EPDM

2162* Coupling socket Ø 3”/2”/76/50 mm, Nitrilesee above

see above

Technical Data on Extaction Hose FittingsDescription Dimension Ø Part No Colour Material Temp °F max/min/ Antistatic Abrasion resistance UV and zone Resistance to Resistance to

(in/mm) Temp °C max/min resistance Welding Fume solvent and oil

Coupling socket 3”/2”/76/50 2008E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/2”/50/50 2107E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/1.5”/50/38 2108E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

3”/2”/76/50 (PU)** 2161E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Coupling socket 3”/2”/76/50 2162E Blue NBR 248/-76/120/-60 Yes 2 3 3 2

Coupling socket 2”/2”/50/50 2129E Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/2”/50/50 (PU)** 2158E Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 (PU)** 2157E Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 2128E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.25”/38/32 2133E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.25”/1.25”/32/32 2171E Black PA12 284/-4/140/-20 Yes 1 2 3 1

Connecting sleeve 1.25”/1.5”/32/38 2132E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 (PU)** 2159E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 2114E Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/2”/50/50 2129E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1”/1”/25/25 2167E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/1.5/38/38 2115E Black PA12 284/-4/140/-20 Yes 1 2 3 1

Connecting sleeve 1”/1.5”/26/38 2109E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1”/1.25”/26/32 2110E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

.7”/1.25”/17/32 2106E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Inter, sleeves 2”/1.5”/50/38 2131E Black PA12 284/-4/140/-20 Yes 1 2 3 1

2”/1.5”/50/38 (PU)** 2160E Black PA12 284/-4/140/-20 Yes 1 2 3 1

Inter, sleeves 3”/2”/76/50 2100E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

2”/1.5”/50/38 2120E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1.5”/1.25”/38/32 2121E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

1.25”/1”/32/25 2101E Black EPDM 284/-76/140/-60 Yes 2 1 2 4

Hose connector 2”/50 2170E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.5”/38 2169E Black PA12 284/-4/140/-20 Yes 1 2 3 1

1.25”/32 2168E Black PA12 284/-4/140/-20 Yes 1 2 3 1

Scale: 1 Excellent 2 Good

3 Limited 4 Poor160

11Antistatic Accessories

7276 7264 72357236

72777238



gg

7257 7258

7259

7261

All plastic sacks are manufactured in strong LD-polyethylene. Sacks are sold in packs of 50.

Plastic Sacks

7279

7281

72977365 7374

Part No Description

7235E Cast Alu Floor Tool B 15”/370 mm Ø 1.5”/38 mm

7236E Cast Alu Floor Tool B 18”/450 Ø 1.5”/38 mm

7257E Chrome Steel Wand Ø 1.5”/38 mm

7258E SLightweight Alu Wand Ø 1.5”/38 mm

7259E Lightwieght Alu Wand Ø 1.5”/38 mm, with wear strip

7261E Alu Wand Extension Ø 1.5”/38 mm, L = 705 mm

7276E Tapered nozzle Ø 1.5”/38 mm

7297E Crevice nozzle Ø 1.5”/38 mm, B= 8”/200 mm

7365E Flat nozzle Ø 1.5”/38 mm L= 14”/350 mm, Antitstatic

7374E Brush ESD for 7278E, 7279E

TECHNICAL DATA

Floor nozzle;

Light applications

Qnom

120 cfm/200 m3/h

pnom

20 inwg/5 kPa

Heavy applications

Qnom

150 cfm/250 m3/h

pnom

32 inwg/8 kPa

Hand Nozzle;

Qnom

150 cfm/250 m3/h

pnom

12 inwg/3 kPa

Part No Description

7238E Cast Alu Floor Tool B 20”/500 mm A--2”/50 mm

7277E Tapered nozzle Ø 2”/50 mm

7279E Suction brush Ø 2”/50 mm

7281E Floor nozzle Ø 2”/ 50 mm B 8”/200 mm

TECHNICAL DATA

Floor nozzle;

Qnom

210 cfm/350 m3/h

pnom

32 inwg/8 kPa

Hand Nozzle;

Qnom

210 cfm/350 m3/h

pnom

12 inwg/3 kPa

Plastic sacks, model Antistatic Volume (gal/litre) Size (in/mm)

Single-phase dust extractors

DC 2800 H Asbestos 42384 5 gal/20 l 14” x 27.5”/360 x 700 mm

Stationary dust extractors

S 11000 42111 23 gal/90 l 27.5” x 33.5”/700 x 850 mm/ 27.5” x 43.3”/700 x1100 mm

S 21000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 32000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 34000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 34000X 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Pre-separators

DCF Mobil 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 20000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 30000 42111 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Bag strap, Part No 4313, 1 m, Part No 4613, 1.5 m.

* Sacks are sold in packs of 10 161

11

11

Antistatic Accessories

Th e suction casing is the key to an eff ective source extraction system, it must be light weight and well designed while at the same time effi cient at capturing the dust. Dustcontrol’s suction case kits include a variety of clamping rings and spacers to give you fl exibility when fi tting to diff erent hand power tools.

TECHNICAL DATA Con. Q nom

p nom

Small hand-held tools ø1.25”/32 mm 90 cfm/150 m3/h 14 inwg/3.5 kPa

Hand-held tools ø1.5”/38 mm 120 cfm/200 m3/h 14 inwg/3.5 kPa

Large hand-held tools e.g. 9”

depressed centre disc ø1.5”/38 mm 150 cfm /250 m3/h 20 inwg/5.0 kPa

Capture dust at the source.

162

11 Suction Casings

1 2 3

Measure the diameter of the disc. Measure the diameter of the mounting collar on the machine - ØD

and the height of the machine - H.

Suction Casing Kit for Depressed Center Wheels, Abrasive Discs and Diamond Discs (N,K):

Connection Ø

Note: The disc has tobe thinner than 18 mm.

Model Size of the disc H (in/mm) Hose connection, Ø (in/mm) Part No

Atlas Copco GTG 40 FO66-23 9’’ 1.6”/41 1.5”/38 6805*

Georges Renault KL 365 9’’ 2.3/59 1.5”/38 6388*

Model specifi c suction casings

*With the clamping rings welded on the suction casings.* *Some Hitachi machines have a Ø1.6 /40 mm conical neck. With these it is necessary to buy an aluminium ring (Part No 6270). When mounted on the machine this aluminium ring enlarges the ØD of the machine to 2”/50 mm – therefore choose suction casing package 5’’ – Part No 6678.

Disc Diameter Ø D (in/mm) H (in/mm) Hose connection, Ø (in/mm) Part No

4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.2”–1.8”/31–46 1.25”/32 6676

5’’ (125 mm) 1.6”–1.8”/40–45 1.2”–1.8”/31–46 1.25”/32 6677**

5’’ (125 mm) 1.8”–2.1”/46–53 1.2”–1.8”/31–46 1.25”/32 6678

7’’ (175 mm) 2.4”–2.6” & 2.9”–3”/62–65 & 74–77 1.2”–2”/31–51 1.5”/38 6679

9’’* 4.4”/112 1.5”/37 1.5”/38 6221*

9’’ 2.7”/68 2”/51 1.5”/38 6202*

9’’ 2.9”/74 2.1”/54 1.5”/38 6302*

9’’ 2.9”/74 1.5”/37 1.5”/38 6349*

9’’ 2”/50 1.9”/47 1.5”/38 6500*

9’’ 2.4”/62 2.1”/54 1.5”/38 6416*

9’’ 2.4”/62 2”/50 1.5”/38 6438*

9’’ 2.4”/62 1.9”/48 1.5”/38 6555*

9’’ 2.6”/65 1.6”/40 1.5”/38 6842*

9’’ 2.5”/64 2”/52 1.5”/38 6427*

2.3”/58 2.1”/54 1.5”/38 6537*

163

11

11

Suction Casings

1 2 3

Suction Casing Kit for Diamond Cup Wheels (D):



Disc Diameter Ø D (in/mm) H (in/mm) Hose connection, Ø (in/mm) Part No

4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.9”–2.1”/49–54 1.25”/32 6681

5’’ (125 mm) 1.6”–1.9”/40–49 1.9”–2.8”/49–70 1.25”/32 6682

5’’ (125 mm) 2”/50 1.5”–2.4”/38–61 1.25”/32 6673

7’’ (175 mm) 2.1”–2.4”/54–61 2.5”–2.8”/63–72 1.5”/38 6683

7’’ (175 mm) 2.4”–2.6” & 2.9”–3” / 62–65 & 74–77 2.5”–3.4”/63–86 1.5”/38 6684

164

11 Suction Casings

1 2

3

Suction Casing Kit for Sanding Discs (F):

Disc Diameter Ø D (in/mm) H (in/mm) Part No Connection Ø (in/mm)

1½–3’’ (38–75 mm) 1.1”/27 * 6833* 1.25”/32

4’’ (100 mm) 1.6”–1.9”/40–49 1.5”–1.7”/39–44 6670 1.25”/32

4 ½’’ (115 mm) 1.6”–1.9”/40–49 1.5”–1.9”/39–48 6671 1.25”/32

5’’ (125 mm) 1.6”–1.9”/40–49 1.5”–1.9”/39–48 6672 1.25”/32

5’’ (125 mm) 2”/50 1.5”–2.1”/38–61 6673 1.25”/32

7’’ (175 mm) 2.1”–2.4”/54–61 2”–2.3”/50–59 6674 1.5”/38

7’’ (175 mm) 2.4”–2.6” & 2.9”–3”/62–65 & 74–77 2”–2.9”/50–73 6675 1.5”/38

* Some Hitachi machines have a Ø1.6”/40 mm conical neck. With these it is necessary to buy an aluminium ring (Part No 6270). When mounted on the machine this aluminium ring enlarges the ØD of the machine to 2”/50 mm – therefore choose suction casing package 5’’ N, K – Part No 6678.



1 23

Measure the diameter of the cup. Measure the diameter of the mounting collar on the machine - ØD


Suction Casing Kit for Abrasive Cup Stone (S):

Cup Diameter Ø D (in/mm) H (in/mm) Connection, Ø (in/mm) Part No

5’’ (125 mm) 2”–3”/50–77 1.8”–3.2”/46–81 1.5”/38 6680

Model specifi c suction casings

Model Size of the disc Connection, Ø (in/mm) Part No

Bosch 6” (150 mm) 1.5”/38 6023

Atlas Copco GTG 40 S060 6” (150 mm) 1.5”/38 6353

165

11

11

Suction Casings

6621

6001

7033

6622

6077 6078

Hammer Drills, Chisels and Breakers

Part No 6622 is perfect for small chisel hammers – and hammer drills.Part No 6077 is perfect for small chisel hammers.

Bellow to Part No 6078, 6622 and 6621

Tool connection Ø D (in/mm) Hose connection (in/mm) Height (in/mm) Part No

2.4”/61 1.5”/38 7”/178 6078

1.9”/48 1.5”/38 6.2”/158 6621

1.7”/43 1.5”/38 6.2”/158 6622

1.25”/32 1.25”/32 4.4”/112 6077

– 2”/50 3.9”/100 6001

Bellow to part no 6078, 6621, 6622 6130

Suction casings B, H, M, L

Model Hose connection Ø D (in/mm) Part No

Atlas Copco RRD 37/RRD 57 1.5”/38 6229

Atlas Copco BBD 11/RRC73 1.5”/38 6152

Model specifi c suction casingsNote: For longer points or hammer drill bits, use two or more bellows, Part No 6130. These will slip on to each other.

6130

166

11 Suction Casings

Please refer to the back page of this catalogue to fi nd the telephone, fax number or e-mail address for your local Dustcontrol rep.It is important that measurements should be taken as accurately as possible to avoid incorrect selections, e.g. with a Vernier Caliper.

Message to: ......................................................

From : .............................................................

Th is message contains .............. page (s) in total

Machine Model Type

D d H h A B M

DDiamond Cup Grinding Disc

N, K.Depressed Center Disc, Abrasive

discs or Diamond Cup Wheels

SAbrasive Cup Stone

FSanding Disc

Information Fax Back FormIn this catalogue, we have included suction casings for the most common power tool types and manufacturers. If you do not fi nd the suction casings here for your tool, send us the dimensions according to the table (diagram) below or call your local representative.

Reciprocating Saw

LEGEND

F Sanding disc D Diamond Cup Wheel N Depressed Centre disc K Abrasive disc, Diamond Cup wheel S Abrasive Cup stonel

Hose connection (in/mm) Part No Machine model

1.25”/32 6290 Atlas Copco SSE 1000 X/SQ/, Milwaukee 65xx-xx (Sawzall)

Suction casings C

Hose connection (in/mm) Part No Machine model

1.25”/32 6269 Milwaukee 6378

Circular Saw

167

11

11

Suction Casings

D1

H

H

H

H

H

D2D1

D2

D1

D2

D1

D2

D1

D2

Description Dimension Part no

D1 D

2 H

in/mm in/mm in/mm

Plastic ring for 5S 4.8”/121 5.5”/139 2”/50 6003saucer grinder 6S 5.8”/147 6.5”/164 2”/50 6004

1 ½ F 1.5”/39 2.3”/59 .9”/23 6314 2 F 1.5”/39 2.7”/69 .9”/23 6313 3 F 1.5”/39 3.7”/95 1” /25 6312Rubber collar for 4 F 2.8”/72 4.6”/117 .5”/13 6182fi bre disc (F) 4 ½ F 2.8”/72 5.3”/135 .5”/13 6181 4 ½ F 2.8”/72 5.3”/135 .9”/23 618100 5 F 2.8”/72 5.7”/145 .5”/13 6195

Rubber collar for 5 F 3.8”/96 5.9”/150 .6”/15 6006fi bre disc (F)

Rubber collar for 5 O 2.8”/72 5.7”/145 1.5”/38 6212osc. sanding 6 O 3.8”/96 6.7”/170 1.1”/28 6180machine

Rubber collar for 7 F 4.4”/112 7.7”/196 .7”/19 6002fi bre disc (F) 7 F 4.4”/112 7.7”/196 1.4”/35 6034 8 F 4.4”/112 8.7”/221 1.6”/41 6211 9 F 4.5”/113 10”/250 1.25”32 6039

Suction Casing, consumable parts

168

11 Suction Casings

169

11

11

Suction Casings

Customized Suction CasingsDustcontrol can customize the suction casing to suit the production process.

Robot deburring for telecom parts.

Suction casing mounted on slitter knife in printing press.

Suction casing mounted on slitter knife in printing press. Suction casing mounted on slitter knife in printing press.

Food packaging industry.

170

11 Suction Casings

Conical pleated fi lter with sealing fl ange.

Cylindrical pleated fi lter with bayonet mounting.

Conical pleated fi lter with sealing fl ange and a fi lter-protective jacket. The HEPA fi lter is mounted inside the fi ne fi lter.

FiltersCellulose Fine FilterGood quality standard fi lter with high fi ltration effi ciency. Epoxy treated for resistance to humidity and other elements.

Polyester Fine FilterHigh quality fi lter material with exceptional resistance to most elements. Particularly suitable to high humidity applications such as machine and tool shops where cutting and cooling fl uids are used. Filter can be washed.

HEPA FilterTh e HEPA fi lter is made of fi breglass material with a support layer of cellulose. Filtration effi ciency is 99.995% EN 60335. Note: When changing fi lters the gasket of the fi lter holder has to be checked and cleaned.Leakage is not permitted in Asbestos applications.

In applications requiring special fi lter materials, standard fi lter confi gurations can be ordered with alternative materials.

DC 1800, DC 2900

Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C)

42029 Fine fi lter Pleated around support cyl. Cellulose, epoxy treated 16.2/1.5 IEC EN 60335-2-69 Part 1 176/80

42029ST Fine fi lter, 48 pcs Cellulose

42028 Fine fi lter Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130

42027 HEPA H13 fi lter Pleated Cellulose, fi breglass 7.5/0.7 HEPA H13 176/80

DC 3800a, DC 3800c, DC 3800c Turbo, DC 3800 Turbo EX , DC 3800c Twin, DC 3800 TR S, DC 3800i, DC 3800 Stationary




42025 Fine fi lter Pleated around support cyl. Polyester 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130

42025ST Fine fi lter, 24 pcs Polyester


42465 Fine fi lter PTFE Pleated around support cyl. Polyester PTFE 26.9/2.5 IEC EN 60335-2-69 Part 1 266/130



DC 5900a/c 4 kW, DC 5800a/c 9.2 kW S /P, DC 5900a/c PTFE, DC 5800i, DC 5800 TR, S 11000, S 21000, S 32000, S 34000, DC 11-Module


429203 Fine fi lter PTFE Pleated around support cyl. Polyester PTFE 53.8/5.0 IEC EN 60335-2-69 Part 1 266/130

429204 Fine fi lter Pleated around support cyl Polyester 53.8/5.0 IEC EN 60335-2-69 Part 1 266/130


4422 HEPA H13 fi lter, TR (installed under top cover) Pleated around support cyl. Cellulose, fi breglass 25.0/2.32 HEPA H13 176/80

4284 Fine fi lter S 34000X Pleated around support cyl. Polyester 129.6/12 IEC EN 60335-2-69 Part 1 266/130

428402 Fine fi lter antistatic S 34000 Pleated around support cyl. Polyester 129.6/12 IEC EN 60335-2-69 Part 1 266/130

429206 Fine fi lter antistatic Pleated around support cyl. Polyester 90.4/8.4 IEC EN 60335-2-69 Part 1 266/130

42807 HEPA H13 fi lter Pleated around support cyl. Cellulose, fi breglass 40.0/3.72 HEPA H13 176/80

42869 HEPA H13 fi lter Pleated around support cyl. Cellulose, fi breglass 29.5/2.74 HEPA H13 176/80

Air Cleaners: DC AirCube 2000/DC AirCube 500


42619 Pre-fi lter, DC AirCube 2000 (old) Carpet Polyester 6.5/0.6 G4 122/50

42690 Pre-fi lter, DC AirCube 500 Pleated Carpet Polyester 1.9/0.18 G3 176/80

42692 HEPA H13 fi lter, DC AirCube 500 Pleated Cellulose, fi breglass 49.1/4.56 HEPA H13 176/80

42896 HEPA H13 fi lter, DC AirCube 2000 Pleated around support Cellulose, fi breglass 101.4/9.42 HEPA H13 122/50



42940 HEPA H13 fi lter, DC AirCube 1200 Pleated Cellulose, fi breglass 59.09/5.49 HEPA H13 176/80

171

11

11

Consumables

42029 42028 42027 42026 42025 42024 4292 4889 404901 4133 408801 408803 4916

Filters for Earlier models

DC 2500i, DC 2500, DC 2500 Twin

Part No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C

4889 Fine fi lter cylindric Pleated Polyester 15.1/1.4 IEC EN 60335-2-69 Part 1 266/130

404901 Fine fi lter cylindric Pleated around support cyl. Cellulosa 16.2/1.5 IEC EN 60335-2-69 Part 1 158/70


4133 HEPA H13 fi lter (installed in the fi ne fi lter) Pleated around support cyl. Cellulose, fi breglass 5.4/0.5 HEPA H13 176/80

DC 2700c, DC 2700i From serial number 2527595, the DC 2700c and the DC 2700i can be equipped with a separate HEPA-fi lter (Part No. 42027). Older models shall be equipped with a single HEPA combifi lter., DC 2800a/c, DC 2800c RentalPart No Description Construction Material Area (ft2 /m2 ) Classifi cation Max temp (°F /°C




DC 3500, DC 3500 TR, DC 3500 Stationary, DC 5500, DC 5500i


408801 Fine fi lter conic Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130

408803 Fine fi lter Pleated Cellulose 16.2/1.5 IEC EN 60335-2-69 Part 1 176/80

408804 Fine fi lter DC 3500 TR Pleated Polyester 17.2/1.6 IEC EN 60335-2-69 Part 1 266/130

4821 HEPA H13 fi lter, DC 3500 TR Pleated Cellulose, fi breglass 16.2/1.5 HEPA H13 158/70

4366 HEPA H13 fi lter, DC 3500 (installed on exhaust) Pleated around support cyl. Cellulose, fi breglass 15.1/1.4 HEPA H13 176/80

4422 HEPA H13 fi lter, DC 5500 5 kW (installed under top cover) Pleated around support cyl. Cellulose, fi breglass 24.8/2.3 HEPA H13 176/80

DC 3500i, DC 5700c, DC 5800 a/c 5 kW, DC 5800 a/c PTFE


4916 Fine fi lter conic Pleated Polyester 16.2/1.5 IEC EN 60335-2-69 Part 1 266/130

4917 Combi-fi lter DC 3500i (Fine fi lter + HEPA H13 fi lter) Pleated Cellulose, fi breglass 16.2/1.5 HEPA H13 176/80

4422 HEPA H13 fi lter DC 5700 5 kW (installed under top cover) Pleated around support cyl. Cellulosa, fi breglass 24.8/2.3 HEPA H13 176/80

DC 3700c




Air Cleaners DC 380/DC 1500/DC AirCube/DC AirCube Rental/DC AirCube X2


4080 Pre-fi lter, DC 380 Carpet, single ply Polyester 1.08/0.1 G4 212/100

4669 Pre-fi lter, DC 1500 Carpet, single ply Polyester 3.2/0.3 IEC EN 60335-2-69 Part 1 212/100

4079 Combi-fi lter (Fine fi lter + HEPA H13 fi lter), DC 380 Cartridge, pleated Fibreglass 50.9/4.7 HEPA H13 248/120

42136 Combi-fi lter (Fine fi lter + HEPA H13 fi lter) Cartridge, pleated Cellulose, fi breglass 56.1/5.2 HEPA H13 176/80

4667 Combi-fi lter (Fine fi lter + HEPA H13 fi lter), DC 1500 Cartridge, pleated Fibreglass 171.7/15.9 HEPA H13 248/120

Some of our most common fi lters

172

11 Consumables

All plastic sacks are manufactured in strong LD-polyethylene.

Plastic Sacks

Plastic sacks, model Standard Antistatic/ESD Volume (gal/litre) Size (in/mm)

Single-phase dust extractors

DC 1800 42291*/ 4 gal/15 l 21.7” x 21.7”/550 x 550 mm

DC 2900c 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm

DC 2800 H Asbestos 42285 42384 5 gal/20 l 14” x 27.5”/360 x 700 mm

DC 3900c 43619 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 3900 L, 4 x 20 m 432177 - D = 360

Three-phase dust extractors

DC 3800c Turbo 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 3800c Twin Turbo 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 5900c 46145 Intellibag*/ 15.5 gal/60 l 25.2 x 39.4/640 x 1000 mm

DC 5900 L 4 x 20 m 432177 - D = 360

Compressed air dust extractors

DC 3800 TR S 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 5800 TR 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Stationary dust extractors

S 11000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 21000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 32000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 34000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

S 34000X 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

DC 3800 Stationary 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 11-Module 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Pre-separators

DC F 60 42285 5 gal/20 l 14” x 27.5”/360 x 700 mm

DC F 2800 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm

DC F 2500 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm

DC F 3500 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC F Mobil 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 8000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 11000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 20000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

F 30000 4714**/ 42111**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Old dust extractors

DC 2500 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm

DC 2500 Twin 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm



DC 2800c Rental 42702 Intellibag*/ 5 gal/20 l 17.7” x 24.4”/450 x 620 mm

DC 3500 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

Dc 3800c 4314**/ 10.5 gal/40 l 19.7” x 33.5”/500 x 850 mm

DC 5500 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

DC 5800c 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

DC 11000 4714**/ 23 gal/90 l 27.5” x 43.3”/700 x 1100 mm

Bag strap, Part No 4313, 1 m, Part No 4613, 1.5 m.

*/ Sacks are sold in packs of 10

**/ Sacks are sold in packs of 50

173

11

11

Consumables

Internationalenglish 2014 11 1

Documents

Transcript of Internationalenglish 2014 11 1