INTERNAL GRIPPER SERIES LG1000 - Zimmer Group
4
2 ► PRODUCT ADVANTAGES ► SERIES CHARACTERISTICS Installation size Version LG10XX -01SI -02SI Axial energy supply Radial energy supply, through-hole Maintenance free IP54 INTERNAL GRIPPER SERIES LG1000 INTERNAL GRIPPER SERIES LG1000 ► Individually adjustable The design of the gripper enables you to grip not only cylindrical gripping surfaces, but also conical and square ones with process reliability ► Integrated air or vacuum feedthrough Use this option for applications such as leak tests, purg- ing or vacuuming your part ► Surface protection provided by silicone membrane In addition to covering a vast range of gripping diam- eters, the membrane provides ideal protection from damage www.zimmer-group.com ► Data, Drawings, 3-D Models, Operating Instructions
Transcript of INTERNAL GRIPPER SERIES LG1000 - Zimmer Group
2
► PRODUCT ADVANTAGES
► SERIES CHARACTERISTICS
Installation size Version
LG10XX -01SI -02SI
Axial energy supply
Radial energy supply, through-hole
Maintenance free
IP54
INTERNAL GRIPPERSERIES LG1000INTERNAL GRIPPERSERIES LG1000
► Individually adjustable
The design of the gripper enables you to grip not only cylindrical gripping surfaces, but also conical and square ones with process reliability
► Integrated air or vacuum feedthrough
Use this option for applications such as leak tests, purg-ing or vacuuming your part
► Surface protection provided by silicone membrane
In addition to covering a vast range of gripping diam-eters, the membrane provides ideal protection from damage
www.zimmer-group.com ► Data, Drawings, 3-D Models, Operating Instructions
3
►BENEFITS IN DETAIL
1
3
2
4
Version-01
5
3
2
4
1
Version-02
► SLIP FORCE DIAGRAM
0
5
10
15
20
25
30
35
40
45
50
55
60
7,5 8 8,5 9 9,5 10 10,5 11 11,5 12 12,5 13 13,5 14 14,5 15 15,5 16 16,5 17 17,5 18 18,5 19
LG1008 LG1010 LG1012 LG1015
Slip
forc
e [N
]
Diameter [mm]
Values measured at 6 bar and Ra = 0.8
1Energy supply- Axial (version-01) or radial (version-02)
2Mounting and positioning- via fi t, thread and lock nut
3Robust, lightweight housing- Hard-coated aluminum alloy
4Direct gripping with rubber membrane- High holding force due to high friction value- reset when venting
5Through-hole- Compressed air or vacuum connection for cooling the
workpieces or testing them for leaks (version-02)
Data, Drawings, 3-D Models, Operating Instructions ◄ www.zimmer-group.com
2
► PRODUCT SPECIFICATIONS
► Slip force diagram
20
40
50
7,5
10
30
60
8,5 9 100
9,5 1110,58
LG1008
Slip
forc
e [N
]
Diameter [mm]
Values measured at 6 bar and Ra = 0.8
►RECOMMENDED ACCESSORIES
INTERNAL GRIPPERINSTALLATION SIZE LG1008
ENERGY SUPPLY
GVM3Straight Fittings - Barb Style Connection
GVM5Straight Fittings - Quick Connect Style
WVM3Angled Fittings - Barb Style Connection
ENERGY SUPPLY
WVM5Angled Fittings - Quick Connect Style
CONNECTIONS / OTHER
DAL02350Centering cone
www.zimmer-group.com ► Data, Drawings, 3-D Models, Operating Instructions
SW17
SW5
M5
SW2
63.5
19.5
39.
3
88
M10
10 h7
16
7.5
SW14
1
2
SW17
0.7
SW2
0.7
63.5
M10
88
7.5 39.
3 1939
10 h7
16
SW5
M5
SW14
M32
1
20
3
7.5
SW3.2
66.5
2.7
3
20
Order no. LG1008-01SI LG1008-02SITotal stroke in Ø [mm] 2.5 2.5Gripping diameter min. [mm] 8 8Gripping diameter max. [mm] 10.5 10.5Slip force max. [N] 53 53Retract time / Extend time [s] 0.2 0.2Operating pressure min. [bar] 4 4Operating pressure max. [bar] 6 6Nominal operating pressure [bar] 6 6Operating temperature min. [°C] 5 5Operating temperature max. [°C] +80 +80Air volume per cycle [cm³] 0.7 0.7Protection to IEC 60529 IP54 IP54Weight [kg] 0.032 0.028
► Technical data
LG1008-01SI LG1008-02SI 1 Gripper attachment2 Energy supply3 Centering cone (for order no., see accessory
recommendation)cl Through-hole
Data, Drawings, 3-D Models, Operating Instructions ◄ www.zimmer-group.com
