Interfaces Ge ng Started - HYUNDAI SECURITY · adap ve 10/100 Mbps LAN interfaces. Suppor ng...
1
Quick Start Guide This quick start guide is intended for users of video/audio distribu-tor. 2 types of video/audio distributor are refered in this quick start guide. Type I Video/Audio Distributor with 6 Device Interfaces Type II Video/Audio Distributor with 12 Device Interfaces Legal Disclaimer REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOS-ES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS. Regulatory Informa�on FCC Informa�on Please take a�en�on that changes or modifica�on not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica- �ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separa�on between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Condi�ons This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired opera�on. EU Conformity Statement This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Direc�ve 2014/30/EU, the RoHS Direc�ve 2011/65/EU. 2012/19/EU (WEEE direc�ve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collec�on points. For more informa�on see: www.recyclethis.info 2006/66/EC (ba�ery direc�ve): This product contains a ba�ery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documen- ta�on for specific ba�ery informa�on. The ba�ery is marked with this symbol, which may include le�ering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the ba�ery to your supplier or to a designated collec�on point. For more informa�on see: www.recyclethis.info Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards require-ments. 1 Overview 2 Interfaces Do not connect any device interfaces (A1, 3 Ge�ng Started The video/audio distributor supports network cable Type I A2, A3, A4, A5, or A6) to a distributor You can use the distributor by pung it on the directly. power supply, and has a built-in voltage-stabilized table. If so, you can skip the step 1. power. Type I has eight 10/100M LAN interfaces, six A1 A6 B1 B2 Interfaces B1 and B2 can be connected to a The installaon steps are same for Type I and of which support powering over network cables, Type II. distributor with a network cable. and Type II has sixteen 10M/100M LAN interfaces, Step1 Install the distributor to the wall with 2 Interfaces A1, A2, A3, A4, A5, and A6 are device twelve of which support powering over network screws. interfaces. cables. The video/audio distributor is suitable for Distributor Dimension: 275.2 mm (L) x 92 mm internet connec�on of all-digital video intercom in (W) x 102.2 mm (H). residence communi�es. Built-in 24 VDC voltage-stabilized switching mode power supply (Type I) Eight RJ-45 interfaces, including six adap�ve 10/100 Mbps LAN interfaces. -45 interfaces, including twelve adap�ve 10/100 Mbps LAN interfaces. Suppor�ng network cable powering and two adap�ve 10/100 Mbps cascading LAN interfaces. IEEE802.3, IEEE802.3u, IEEE802.3x Type II Module 1 A1 A6 C1 C2 B1 B6 D1 D2 Module 2 In Module 1 Interfaces C1 and C2 can be connected to a distributor with a network cable. Interfaces A1, A2, A3, A4, A5, and A6 are device interfaces. In Module 2 Interfaces D1 and D2 can be connected to a distributor with a network cable. Interfaces B1, B2, B3, B4, B5, and B6 are device interfaces. Step2 Power on the distributor. The power socket is lay on the rear panel. Storing and forwarding func�on VLAN technique (Op�onal) Suitable for wall moun�ng. Working temperature: -15 °C to 55 °C (5 °F to 131 °F) * The power adapter is not included in the package. For Type II, module 1 and module 2 are independent modules. For example: When C1 or C2 is connected to a distributor with a network cable, only devices connected to device interfaces of module 1 can connect to the network normally. Do not connect any device interfaces (A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5, or B6) to a distributor directly. Device interfaces (A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5, or B6) cannot be interconnected directly. Power Socket UD07935N VIDEO/AUDIO DISTRIBUTOR (HYU-560) Quick Start Guide (Type II) Sixteen RJ
Transcript of Interfaces Ge ng Started - HYUNDAI SECURITY · adap ve 10/100 Mbps LAN interfaces. Suppor ng...
Quick Start Guide This quick start guide is intended for users of video/audio distribu-tor. 2 types of video/audio distributor are refered in this quick start guide.
Type I Video/Audio Distributor with 6 Device Interfaces Type II Video/Audio Distributor with 12 Device Interfaces
Legal Disclaimer REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW. OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOS-ES. IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.
Regulatory Informa�on FCC Informa�on Please take a�en�on that changes or modifica�on not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protec�on against harmful interference in a residen�al installa�on. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc�ons, may cause harmful interference to radio communica-�ons. However, there is no guarantee that interference will not occur in a par�cular installa�on. If this equipment does cause harmful interference to radio or television recep�on, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separa�on between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Condi�ons This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two condi�ons: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired opera�on. EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the EMC Direc�ve 2014/30/EU, the RoHS Direc�ve 2011/65/EU. 2012/19/EU (WEEE direc�ve): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collec�on points. For more informa�on see: www.recyclethis.info 2006/66/EC (ba�ery direc�ve): This product contains a ba�ery that cannot be disposed of as unsorted municipal waste in the European Union. See the product documen-ta�on for specific ba�ery informa�on. The ba�ery is marked with this symbol, which may include le�ering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling, return the ba�ery to your supplier or to a designated collec�on point. For more informa�on see: www.recyclethis.info
Industry Canada ICES-003 Compliance This device meets the CAN ICES-3 (B)/NMB-3(B) standards require-ments.
1 Overview 2 Interfaces Do not connect any device interfaces (A1,
3 Ge�ng Started
The video/audio distributor supports network cable Type I A2, A3, A4, A5, or A6) to a distributor You can use the distributor by putting it on the
directly.
power supply, and has a built-in voltage-stabilized table. If so, you can skip the step 1.
power. Type I has eight 10/100M LAN interfaces, six A1 A6 B1 B2 Interfaces B1 and B2 can be connected to a The installation steps are same for Type I and
of which support powering over network cables, Type II.
distributor with a network cable.
and Type II has sixteen 10M/100M LAN interfaces, Step1 Install the distributor to the wall with 2
Interfaces A1, A2, A3, A4, A5, and A6 are device
twelve of which support powering over network screws.
interfaces.
cables. The video/audio distributor is suitable for Distributor Dimension: 275.2 mm (L) x 92 mm
internet connec�on of all-digital video intercom in (W) x 102.2 mm (H).
residence communi�es.
Built-in 24 VDC voltage-stabilized switching mode
power supply (Type I) Eight RJ-45 interfaces, including six
adap�ve 10/100 Mbps LAN interfaces. -45 interfaces, including twelve
adap�ve 10/100 Mbps LAN interfaces. Suppor�ng network cable powering and two
adap�ve 10/100 Mbps cascading LAN interfaces. IEEE802.3, IEEE802.3u, IEEE802.3x
Type II
Module 1 A1 A6 C1 C2
B1 B6 D1 D2 Module 2
In Module 1
Interfaces C1 and C2 can be connected to a distributor with a network cable.
Interfaces A1, A2, A3, A4, A5, and A6 are device interfaces. In Module 2
Interfaces D1 and D2 can be connected to a distributor with a network cable.
Interfaces B1, B2, B3, B4, B5, and B6 are device interfaces.
Step2 Power on the distributor. The power socket is lay on the rear panel.
Storing and forwarding func�on VLAN technique (Op�onal) Suitable for wall moun�ng. Working temperature: -15 °C to 55 °C (5 °F to
131 °F) * The power adapter is not included in the package.
For Type II, module 1 and module 2 are independent modules.
For example: When C1 or C2 is connected to a distributor with a network cable, only devices connected to device interfaces of module 1 can connect to the network normally.
Do not connect any device interfaces (A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5, or B6) to a distributor directly. Device interfaces (A1, A2, A3, A4, A5, A6, B1, B2, B3, B4, B5, or B6) cannot be interconnected directly.
Power Socket
UD07935N
VIDEO/AUDIODISTRIBUTOR(HYU-560)
Quick Start Guide
(Type II) Sixteen RJ
