Interface relays and optocouplers Product group picture...2017/08/22 · 5 5/3 ABB | Catalog...

5

5/1 ABB | Catalog Electronic relays and controls 2017 | 2CDC 110 004 C0210_05 (E)

Interface relays and optocouplersProduct group picture

5

2CDC 110 004 C0210_05 (E) | Catalog Electronic relays and controls 2017 | ABB 5/2

Interface relays and optocouplersTable of contents

Interface Relays and Optocouplers

Benefits and advantages 5/3

Benefits and advantages, approvals 5/4

Pluggable interface relays and optocouplers 5/5

Table of contents 5/6

Socket types 5/7

Ordering details - CR-S range 5/8

Ordering details - Relay assemblies, Optocoupler assemblies 5/9

Ordering details - CR-P range 5/10

Ordering details - CR-M range 5/11

Ordering details - CR-P/M function modules 5/14

Ordering details - CR-U range 5/15

Ordering details - CR-U function modules 5/16

Technical data - CR-P, CR-M, CR-U 5/17

Technical data, load limit curves - CR-P, CR-M, CR-U 5/19

Technical data - CR-P optocouplers 5/20

Technical data - Sockets for CR-P and CR-M 5/21

Technical data - Sockets for CR-U 5/22

Load limit curves - CR-P, CR-M and CR-U 5/23

Technical data - CR-S interface relays 5/24

Technical data - CR-S optocouplers 5/25

Technical diagrams - CR-S interface relays, CR-S optocouplers 5/25

Technical data - CR-S range sockets 5/26

Connection diagrams 5/27

Dimensional drawings 5/28

Boxed interface relays and optocouplers R600 range 5/31

Table of contents 5/32

Overview 5/33


Boxed interface relays R600 range 5/35

Selection 5/35

Ordering details 5/37


Technical data 5/40

Dimensional drawings, Load limit curves 5/43

Boxed interface optocouplers R600 range 5/45

Selection 5/45



Technical data 5/48

Technical data, Dimensions 5/50

5


Interface relays and optocouplersBenefits and advantages

– 12 different coil voltages – DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 125 V, 220 V – AC versions: 24 V, 48 V, 110 V, 120 V, 230 V

– Output contacts – 2 c/o contacts (12 A) or – 3 c/o contacts (10 A) or – 4 c/o contacts (6 A)

optionally equipped with gold contacts, LED and free wheeling diode

– Integrated test button for manual actuation and locking of the output contacts (blue = DC, orange = AC) that can be removed if necessary

– With or without integrated LED – Logical or standard sockets – Cadmium-free contact material – Width on socket: 27 mm – Pluggable function modules

– Reverse polarity protection/Free wheeling diode – LED indication – RC elements – Overvoltage protection

– 9 different coil voltages – DC versions: 12 V, 24 V, 48 V, 110 V – AC versions: 24 V, 48 V, 110 V, 120 V, 230 V

– Output contacts: – Output relay: 1 c/o contact (16 A)

2 c/o contact (8 A), standard and gold-plated – Output optocoupler: MOS-FET 5 A - 35 V DC,

Triac 3 A - 275 V AC – Logical or standard sockets – Cadmium-free contact material – Width of socket: 15.5 mm – Pluggable function modules

– Reverse polarity protection/Free wheeling diode – LED indication – RC elements – Overvoltage protection

– Standard slim relays (5 mm), optocouplers (5 mm), sockets (6.2 mm) and accessories

– Combination of 9 different rated control supply voltages possible: DC versions: 5 V, 12 V, 24 V AC/DC versions: 12 V, 24 V, 48 V, 60 V, 110 V, 230 V

– Output relay: 1 c/o (SPDT) contact (6 A), standard and gold-plated Output optocoupler: Transistor 100 mA - 48 V DC, MOS-FET 2 A - 24 V DC, Triac 2 A - 240 V AC

– Cadmium-free contact material – All sockets with LED – Screw and spring connection terminals – Jumper bar (red, black, blue), marker and separator avail-

able as accessories

– 12 different coil voltages – DC versions: 12 V, 24 V, 48 V, 110 V, 125 V, 220 V – AC versions: 24 V, 48 V, 60 V, 110 V, 120 V, 230 V

– Output contacts – 2 c/o contacts (10 A) or – 3 c/o contacts (10 A)

– Integrated test button for manual actuation and locking of the output contacts (blue = DC, orange = AC) that can be removed if necessary

– With or without integrated LED – Cadmium-free contact material – Width on socket: 38 mm – Pluggable function modules

– Reverse polarity protection/Free wheeling diode – LED indication – RC elements – Overvoltage protection – Multifunction time module

Slim relays and optocouplers CR-S

Pluggable universal relays CR-U

Pluggable PCB relays and optocouplers CR-P

Pluggable miniature relays CR-M

5


Interface relays and optocouplersBenefits and advantages, approvals

– Boxed slim relays and optocouplers modules 6 mm or 12 mm – 8 different rated control supply voltages:

DC versions: 5 V, 12 V, 24 V AC/DC versions: 24 V, 48-60 V, 115 V, 230 V, 60-230 V

– Output relay: 1 n/c contact, 1 n/o contact, 1 c/o (SPDT) con-tact, 2 c/o (SPDT) contacts Output optocoupler: Transistor 100 mA - 58 V DC. MOS-FET 2 A / 5 A - 58 V DC, Triac 1 A / 2 A - 230 V AC

– Devices with output contacts protected by built in RC circuit, which result in increased contact life

– Devices with leakage current protection on the input side – All products with LED for the indication of the operational

state – Screw or spring-type terminals – Jumper bars and separator end section as accessories

R600 series interface relays and optocouplers

Approvals and marksJ existing j pending

Relays Sockets Modules

Approvals

CR-S CR-P

CR

-M

CR

-U

R6

00

CR

-S s

ock

ets

CR

-PLS

C

R-P

SS

CR

-PLC

CR

-M..L

.. C

R-M

..SS

CR

-M..S

F

CR

-U..S

C

R-U

..E

CR

-U..S

M

CR

-P/M

CR

-U

Rel

ays

Op

toco

uple

rs

Rel

ays

Op

toco

uple

rs

G cURusUL 508 / CAN/CSA C22.2 No. 14 M M M M M M M M M M M M M M M M

F CAN/CSA C22.2 No.14 M M 2) M M M M M M M M M M M M

J VDE M 1) M M 3) M M 1)

R EAC M M M M M M M M M M M M M M

P Lloyds Register M 4) M M

E CCC M M M 3) M

CQC M

L RMRS M 5) M 5)

Marksa CE M M M M M M M M M M M M

1) only relays and sockets with screw terminals2) except versions with gold contacts3) except 125 V DC devices4) only devices with 4 c/o contacts5) except 60 V and 125 V devices

5


Pluggable interface relays and optocouplersProduct group picture

5


Pluggable interface relays and optocouplersTable of contents

Pluggable interface relays and optocouplers

Socket types 5/7

Ordering details - CR-S range 5/8

Ordering details - Relay assemblies, Optocoupler assemblies 5/9

Ordering details - CR-P range 5/10

Ordering details - CR-M range 5/11

Ordering details - CR-P/M function modules 5/14

Ordering details - CR-U range 5/15

Ordering details - CR-U function modules 5/16

Technical data - CR-P, CR-M, CR-U 5/17

Technical data, load limit curves - CR-P, CR-M, CR-U 5/19

Technical data - CR-P optocoupler 5/20

Technical data - Sockets for CR-P and CR-M 5/21

Technical data - Sockets for CR-U 5/22

Load limit curves - CR-P, CR-M and CR-U 5/23

Technical data - CR-S interface relays 5/24

Technical data - CR-S optocoupler 5/25

Technical diagrams - CR-S interface relays, CR-S optocouplers 5/25

Technical data - CR-S range sockets 5/26


Dimensional drawings 5/28

5


Kinds of socketsStandard sockets - Position of connecting terminals: Coil connection (A1-A2) on lower socket side, contact connections (n/o and n/c contacts) on the lower and upper socket side.Logical sockets - Position of connecting terminals: Coil connection (A1-A2) on lower socket side, all contact connections (common contacts, n/o and n/c contacts) on upper socket side.Details see connection diagrams

Kind of connecting terminals

CR-S Range

CR-M range

CR-P range

CR-U range

Screw type Spring type Fork type

Pluggable interface relays and optocouplersSocket types

1 Socket

2 Pluggable function module

3 Interface relay

4 Holder

4 Marker label

1 Output contacts

2 Socket

3 Relay holder

4 Marker

4 Interface relay

6 LED green: Control supply voltage applied7 Control supply voltage

1

2

3

4

4

4

3

2

1

4

6

7

1 Socket


3 Interface relay

4 Holder

1 Socket


3 Interface relay

4 Holder

1 1

2 2

3 3

4

4

5


Pluggable interface relays and optocouplersOrdering details - CR-S range

Ordering details - CR-S range pluggable interface relaysRated control supply voltage

Outputs Contact ratings

Type Order code Price Pkg

qty

Weight(1 pc)kg (lb)

5 V DC1 c/o (SPDT) standard contacts

250 V, 6 A

CR-S005VDC1R 1SVR405501R1010

10 0.005 (0.011)

12 V DC CR-S012VDC1R 1SVR405501R201024 V DC CR-S024VDC1R 1SVR405501R301048 V DC CR-S048VDC1R 1SVR405501R401060 V DC CR-S060VDC1R 1SVR405501R50105 V DC

1 c/o (SPDT) gold plated contacts

12 V, 250 mA (3W)1)

CR-S005VDC1RG 1SVR405501R1020

10 0.005 (0.011)

12 V DC CR-S012VDC1RG 1SVR405501R202024 V DC CR-S024VDC1RG 1SVR405501R302048 V DC CR-S048VDC1RG 1SVR405501R402060 V DC CR-S060VDC1RG 1SVR405501R5020

Ordering details - CR-S range pluggable optocouplerRated control supply voltage

Outputs Type Order code Price Pkg

qty

Weight(1 pc)kg (lb)

24 V DCTransistor, 100 mA - 48 V DC CR-S024VDC1TRA 1SVR405510R3050

10 0.004 (0.009)MOS-FET, 2 A - 24 V DC CR-S024VDC1MOS 1SVR405510R3060

Triac, 2 A - 240 V AC CR-S024VDC1TRI 1SVR405510R3070

Ordering details - CR-S range complete interface relays (relay + socket)Rated control supply voltage



qty

Weight(1 pc)kg (lb)

24 V AC/DC

1 c/o (SPDT) standard contacts

250 V, 6 A

CR-S024VADC1CRS 1SVR405541R3110

10 0.03 (0.066)

CR-S024VADC1CRZ 1SVR405541R3210

110 V AC/DCCR-S110VADC1CRS 1SVR405541R6110CR-S110VADC1CRZ 1SVR405541R6210

230 V AC/DCCR-S230VADC1CRS 1SVR405541R7110CR-S230VADC1CRZ 1SVR405541R7210

24 V AC/DC

1 c/o (SPDT) gold plated contacts

12 V, 250 mA (3W)1)

CR-S024VADC1CRGS 1SVR405541R3120

10 0.03 (0.066)

CR-S024VADC1CRGZ 1SVR405541R3220

110 V AC/DCCR-S110VADC1CRGS 1SVR405541R6120CR-S110VADC1CRGZ 1SVR405541R6220

230 V AC/DCCR-S230VADC1CRGS 1SVR405541R7120CR-S230VADC1CRGZ 1SVR405541R7220

1) If specified maximum values exceeded, the gold plating is destroyed. The maximum values of the standard contacts are then valid.

Ordering details - CR-S range socketsRated control supply voltage

Connection type Type Order code Price Pkg

qty

Weight(1 pc)kg (lb)

6-24 V DCScrew CR-S006/024VDC1SS 1SVR405521R1100

10 0.025 (0.055)

Spring CR-S006/024VDC1SZ 1SVR405521R1200

12-24 V AC/DCScrew CR-S012/024VADC1SS 1SVR405521R3100Spring CR-S012/024VADC1SZ 1SVR405521R3200

48-60 V AC/DC

Screw CR-S048/060VADC1SS 1SVR405521R5100Spring CR-S048/060VADC1SZ 1SVR405521R5200

110-125 V AC/DC


220-240 V AC/DC


Ordering details - CR-S range accessoriesVersion Type Order code Price Pkg

qty

Weight(1 pc)kg (lb)

Jumper bar 20 pole, blue color CR-SJB20-BLUE 1SVR405598R070010 0.008

(0.018)Jumper bar 20 pole, red color CR-SJB20-RED 1SVR405598R0800Jumper bar 20 pole, black color CR-SJB20-BLACK 1SVR405598R0900

Marker block CR-SM 1SNB041391R0610 10 0.0036 (0.0079)

Separator CR-SSEP 1SVR405599R0000 10 0.012 (0.026)

CR-S Interface relay

CR-S Optocoupler

2CD

C 2

91 0

05 S

0014

2CD

C 2

91 0

03 S

0016

Further documentation CR-S Range on www.abb.com

http://new.abb.com/products/en/1SVR405501R1010






































http://new.abb.com/products/en/1SNB041391R0610


5


Control voltage Connection terminal

Contact material

Socket type Socket order code Relay type Relay order code

5 V DC screw standard CR-S006/024VDC1SS 1SVR405521R1100 CR-S005VDC1R 1SVR405501R1010gold plated CR-S006/024VDC1SS 1SVR405521R1100 CR-S005VDC1RG 1SVR405501R1020

spring standard CR-S006/024VDC1SZ 1SVR405521R1200 CR-S005VDC1R 1SVR405501R1010gold plated CR-S006/024VDC1SZ 1SVR405521R1200 CR-S005VDC1RG 1SVR405501R1020

12 V DC screw standard CR-S006/024VDC1SS orCR-S012/024VADC1SS

1SVR405521R1100 or1SVR405521R3100

CR-S012VDC1R 1SVR405501R2010

gold plated CR-S006/024VDC1SS orCR-S012/024VADC1SS

1SVR405521R1100 or1SVR405521R3100


spring standard CR-S006/024VDC1SZ orCR-S012/024VADC1SZ

1SVR405521R1200 or1SVR405521R3200

CR-S012VDC1R 1SVR405501R2010

gold plated CR-S006/024VDC1SZ orCR-S012/024VADC1SZ

1SVR405521R1200 or1SVR405521R3200


12 V AC screw standard CR-S012/024VADC1SS 1SVR405521R3100 CR-S012VDC1R 1SVR405501R2010gold plated CR-S012/024VADC1SS 1SVR405521R3100 CR-S012VDC1RG 1SVR405501R2020

spring standard CR-S012/024VADC1SZ 1SVR405521R3200 CR-S012VDC1R 1SVR405501R2010gold plated CR-S012/024VADC1SZ 1SVR405521R3200 CR-S012VDC1RG 1SVR405501R2020

24 V DC screw standard CR-S006/024VDC1SS orCR-S012/024VADC1SS

1SVR405521R1100 or1SVR405521R3100

CR-S024VDC1R 1SVR405501R3010

gold plated CR-S006/024VDC1SS orCR-S012/024VADC1SS

1SVR405521R1100 or1SVR405521R3100


spring standard CR-S006/024VDC1SZ orCR-S012/024VADC1SZ

1SVR405521R1200 or1SVR405521R3200

CR-S024VDC1R 1SVR405501R3010

gold plated CR-S006/024VDC1SZ orCR-S012/024VADC1SZ

1SVR405521R1200 or1SVR405521R3200




48 V AC/DC screw standard CR-S048/060VADC1SS 1SVR405521R5100 CR-S048VDC1R 1SVR405501R4010gold plated CR-S048/060VADC1SS 1SVR405521R5100 CR-S048VDC1RG 1SVR405501R4020


60 V AC/DC screw standard CR-S048/060VADC1SS 1SVR405521R5100 CR-S060VDC1R 1SVR405501R5010gold plated CR-S048/060VADC1SS 1SVR405521R5100 CR-S060VDC1RG 1SVR405501R5020


110-125 V AC/DC screw standard CR-S110/125VADC1SS 1SVR405521R6100 CR-S060VDC1R 1SVR405501R5010gold plated CR-S110/125VADC1SS 1SVR405521R6100 CR-S060VDC1RG 1SVR405501R5020


220-240 V AC/DC screw standard CR-S220/240VADC1SS 1SVR405521R7100 CR-S060VDC1R 1SVR405501R5010gold plated CR-S220/240VADC1SS 1SVR405521R7100 CR-S060VDC1RG 1SVR405501R5020


Relay assemblies

Optocoupler assemblies

Control voltage Connection terminal

Output characteristics

Socket type Socket order code Opto type Opto order code

24 V DC screw Transistor100 mA - 48 V DC

CR-S012/024VADC1SS 1SVR405521R3100 CR-S024VDC1TRA 1SVR405510R3050spring CR-S012/024VADC1SZ 1SVR405521R3200 CR-S024VDC1TRA 1SVR405510R3050screw MOS-FET

2 A - 24 V DCCR-S012/024VADC1SS 1SVR405521R3100 CR-S024VDC1MOS 1SVR405510R3060

spring CR-S012/024VADC1SZ 1SVR405521R3200 CR-S024VDC1MOS 1SVR405510R3060screw Triac

2 A - 240 V ACCR-S012/024VADC1SS 1SVR405521R3100 CR-S024VDC1TRI 1SVR405510R3070

spring CR-S012/024VADC1SZ 1SVR405521R3200 CR-S024VDC1TRI 1SVR405510R3070 How to use the selection table 1 Choose the desired control supply voltage from the column "Control voltage" e.g. 5 V DC.2 Choose the desired kind of connection terminal from the column "Connection Terminal" e.g spring.3 Choose the desired material of contact from the column "Contact Material" e.g. gold plated.

Control voltage 1

Connection terminal 2

Contact material 3

Socket type Socket order code Relay type Relay order code

5 V DC screw standard CR-S006/024VDC1SS 1SVR405521R1100 CR-S005VDC1R 1SVR405501R1010gold plated CR-S006/024VDC1SS 1SVR405521R1100 CR-S005VDC1RG 1SVR405501R1020

spring standard CR-S006/024VDC1SZ 1SVR405521R1200 CR-S005VDC1R 1SVR405501R1010gold plated CR-S006/024VDC1SZ 1SVR405521R1200 CR-S005VDC1RG 1SVR405501R1020



Example: When you have chosen 5 V DC as Control supply voltage, spring connection as Connection Terminal andgold plated as Contact Material the following order codes and type designators are valid: Socket: CR-S006/024VDC1SZ, 1SVR405521R1200 Relay: CR-S005VDC1RG, 1SVR405501R1020













































































































5


Pluggable interface relays and optocouplersOrdering details - CR-P range

Ordering details - CR-P range relaysRated control supply voltage



qty

Weight(1 pc)

kg (lb)

12 V DC

1 c/o (SPDT) 250 V, 16 A

CR-P012DC1 1SVR405600R4000

10 0.014 (0.031)

24 V DC CR-P024DC1 1SVR405600R1000

48 V DC CR-P048DC1 1SVR405600R6000

110 V DC CR-P110DC1 1SVR405600R8000

24 V AC CR-P024AC1 1SVR405600R0000

48 V AC CR-P048AC1 1SVR405600R5000

110 V AC CR-P110AC1 1SVR405600R7000120 V AC CR-P120AC1 1SVR405600R2000230 V AC CR-P230AC1 1SVR405600R3000

12 V DC

2 c/o (SPDT) 250 V, 8 A

CR-P012DC2 1SVR405601R4000

10 0.014 (0.031)

24 V DC CR-P024DC2 1SVR405601R1000

48 V DC CR-P048DC2 1SVR405601R6000

110 V DC CR-P110DC2 1SVR405601R8000

24 V AC CR-P024AC2 1SVR405601R000048 V AC CR-P048AC2 1SVR405601R5000110 V AC CR-P110AC2 1SVR405601R7000

120 V AC CR-P120AC2 1SVR405601R2000

230 V AC CR-P230AC2 1SVR405601R3000

Ordering details - AccessoriesVersion Connection

terminalType Order code Price Pkg

qty

Weight(1 pc)

kg (lb)

Logical socket with protective separation screw CR-PLS 1SVR405650R0000

10

0.045 (0.099)

Logical socketscrew CR-PLSx 1SVR405650R0100 0.043

(0.095)

spring CR-PLC 1SVR405650R0200 0.042 (0.093)

Standard socket screw CR-PSS 1SVR405650R1000 0.038 (0.084)

Plastic holder for socket CR-PH 1SVR405659R000010

0.002 (0.004)

Jumper bar for sockets with screw connection CR-PJ 1SVR405658R5000 0.018 (0.040)

Marker CR-PM 1SVR405658R0000 10 0.0002 (0.0004)

2CD

C 2

91 0

04 F

0007

2CD

C 2

91 0

06 F

0011

2CD

C 2

91 0

06 S

0016

CR-PLS

CR-P optocoupler

CR-P relay

CR-PJ

2CD

C 2

91 0

45 F

0004

Ordering details - CR-P range relays with gold contactsRated control supply voltage



qty

Weight(1 pc)

kg (lb)

24 V DC

2 c/o (SPDT) gold contact 250 V, 8 A

CR-P024DC2 1SVR405606R1000

10 0.014 (0.031)

24 V AC CR-P024AC2G 1SVR405606R0000

110 V AC CR-P110AC2G 1SVR405606R7000

230 V AC CR-P230AC2G 1SVR405606R3000

Ordering details - CR-P range pluggable optocouplersRated control supply voltage(Us)

Outputs Type Order code Price Pkg

qty

Weight(1 pc)

kg (lb)

10-32 V DCMOS-FET, 5 A - 35 V DC CR-P024MOS1 1SVR405610R4060 10 0,011

(0,618)Triac, 3 A - 275 V AC CR-P024TRI1 1SVR405610R4070

Further documentation CR-P range on www.abb.com
































5


Pluggable interface relays and optocouplersOrdering details - CR-M range

Ordering details - CR-M range without LEDRated control supply voltage



qty

Weight(1 pc)

kg (lb)

12 V DC

2 c/o (SPDT) 250 V, 12 A

CR-M012DC2 1SVR405611R4000

10 0.033 (0.073)

24 V DC CR-M024DC2 1SVR405611R1000

48 V DC CR-M048DC2 1SVR405611R6000

60 V DC CR-M060DC2 1SVR405611R4200

110 V DC CR-M110DC2 1SVR405611R8000

125 V DC CR-M125DC2 1SVR405611R8200

220 V DC CR-M220DC2 1SVR405611R9000

24 V AC CR-M024AC2 1SVR405611R000048 V AC CR-M048AC2 1SVR405611R5000

110 V AC CR-M110AC2 1SVR405611R7000

120 V AC CR-M120AC2 1SVR405611R2000

230 V AC CR-M230AC2 1SVR405611R3000

12 V DC

3 c/o (SPDT) 250 V, 10 A

CR-M012DC3 1SVR405612R4000

10 0.033 (0.073)

24 V DC CR-M024DC3 1SVR405612R1000

48 V DC CR-M048DC3 1SVR405612R6000

60 V DC CR-M060DC3 1SVR405612R4200

110 V DC CR-M110DC3 1SVR405612R8000

125 V DC CR-M125DC3 1SVR405612R8200

220 V DC CR-M220DC3 1SVR405612R9000


60 V AC CR-M060AC3 1SVR405612R5200

110 V AC CR-M110AC3 1SVR405612R7000

120 V AC CR-M120AC3 1SVR405612R2000

230 V AC CR-M230AC3 1SVR405612R3000

12 V DC

4 c/o (SPDT) 250 V, 6 A

CR-M012DC4 1SVR405613R4000

10 0.033 (0.073)

24 V DC CR-M024DC4 1SVR405613R1000

48 V DC CR-M048DC4 1SVR405613R6000

60 V DC CR-M060DC4 1SVR405613R4200

110 V DC CR-M110DC4 1SVR405613R8000

125 V DC CR-M125DC4 1SVR405613R8200

220 V DC CR-M220DC4 1SVR405613R9000


110 V AC CR-M110AC4 1SVR405613R7000

120 V AC CR-M120AC4 1SVR405613R2000

230 V AC CR-M230AC4 1SVR405613R3000

CR-M

2CD

C 2

91 0

02 F

0015

Further documentation CR-M range on www.abb.com






































5



Ordering details - CR-M range with LEDRated control supply voltage



qty

Weight(1 pc)

kg (lb)

12 V DC

2 c/o (SPDT) 250 V, 12 A

CR-M012DC2L 1SVR405611R4100

10 0.033 (0.073)

24 V DC CR-M024DC2L 1SVR405611R1100

48 V DC CR-M048DC2L 1SVR405611R6100

60 V DC CR-M060DC2L 1SVR405611R4300

110 V DC CR-M110DC2L 1SVR405611R8100

125 V DC CR-M125DC2L 1SVR405611R8300

220 V DC CR-M220DC2L 1SVR405611R9100

24 V AC CR-M024AC2L 1SVR405611R010048 V AC CR-M048AC2L 1SVR405611R5100

110 V AC CR-M110AC2L 1SVR405611R7100

120 V AC CR-M120AC2L 1SVR405611R2100

230 V AC CR-M230AC2L 1SVR405611R3100

12 V DC

3 c/o (SPDT) 250 V, 10 A

CR-M012DC3L 1SVR405612R4100

10 0.033 (0.073)

24 V DC CR-M024DC3L 1SVR405612R1100

48 V DC CR-M048DC3L 1SVR405612R6100

60 V DC CR-M060DC3L 1SVR405612R4300

110 V DC CR-M110DC3L 1SVR405612R8100

125 V DC CR-M125DC3L 1SVR405612R8300

220 V DC CR-M220DC3L 1SVR405612R9100


110 V AC CR-M110AC3L 1SVR405612R7100

120 V AC CR-M120AC3L 1SVR405612R2100

230 V AC CR-M230AC3L 1SVR405612R3100

12 V DC

4 c/o (SPDT) 250 V, 6 A

CR-M012DC4L 1SVR405613R4100

10 0.033 (0.073)

24 V DC CR-M024DC4L 1SVR405613R1100

48 V DC CR-M048DC4L 1SVR405613R6100

60 V DC CR-M060DC4L 1SVR405613R4300

110 V DC CR-M110DC4L 1SVR405613R8100

125 V DC CR-M125DC4L 1SVR405613R8300

220 V DC CR-M220DC4L 1SVR405613R9100


110 V AC CR-M110AC4L 1SVR405613R7100

120 V AC CR-M120AC4L 1SVR405613R2100

230 V AC CR-M230AC4L 1SVR405613R3100

Ordering details - CR-M range with LED and free-wheeling diodeRated control supply voltage



qty

Weight(1 pc)kg (lb)

24 V DC 4 c/o (SPDT) 250 V, 6 A CR-M024DC4LD 1SVR405614R1100 10 0.033 (0.073)

Ordering details - CR-M range with gold contactsRated control supply voltage



qty

Weight(1 pc)kg (lb)

24 V DC

4 c/o (SPDT) 250 V, 6 A

CR-M024DC4G 1SVR405618R1000

10 0.033 (0.073)

24 V AC CR-M024AC4G 1SVR405618R0000

110 V AC CR-M110AC4G 1SVR405618R7000

230 V AC CR-M230AC4G 1SVR405618R3000

CR-M

2CD

C 2

91 0

02 F

0015










































5



Rated control supply voltage



qty

Weight(1 pc)

kg (lb)

12 V DC

4 c/o (SPDT) 250 V / 6 A

CR-M012DC4LG 1SVR405618R4100

10 0.033 (0.073)

24 V DC CR-M024DC4LG 1SVR405618R1100

48 V DC CR-M048DC4LG 1SVR405618R6100

60 V DC CR-M060DC4LG 1SVR405618R4300

110 V DC CR-M110DC4LG 1SVR405618R8100

125 V DC CR-M125DC4LG 1SVR405618R8300

220 V DC CR-M220DC4LG 1SVR405618R9100

24 V AC CR-M024AC4LG 1SVR405618R0100

10 0.033 (0.073)

48 V AC CR-M048AC4LG 1SVR405618R5100

110 V AC CR-M110AC4LG 1SVR405618R7100

120 V AC CR-M120AC4LG 1SVR405618R2100

230 V AC CR-M230AC4LG 1SVR405618R3100




qty

Weight(1 pc)

kg (lb)

12 V DC

4 c/o (SPDT)

CR-M012DC4LDG 1SVR405618R4400

10 0.033 (0.073)

24 V DC CR-M024DC4LDG 1SVR405618R1400

Ordering details - AccessoriesVersion Connection

terminalType Order code Price Pkg

qty

Weight(1 pc)

kg (lb)

Logical socket for 2 c/o

screw

CR-M2LS 1SVR405651R1100

10

0.055 (0.121)

Logical socket for 3 c/o CR-M3LS 1SVR405651R2100 0.062 (0.137)

Logical socket for 2/4 c/o CR-M4LS 1SVR405651R3100 0.066 (0.146)

Logical socket for 2 c/ospring

CR-M2LC 1SVR405651R120010

0.065 (0.143)

Logical socket for 2/4 c/o CR-M4LC 1SVR405651R3200 0.066 (0.146)

Standard socket for 2 c/o

screw

CR-M2SS 1SVR405651R1000

10

0.066 (0.146)

Standard socket for 3 c/o CR-M3SS 1SVR405651R2000 0.068 (0.150)

Standard socket for 2/4 c/o CR-M4SS 1SVR405651R3000 0.070 (0.154)

Standard socket for 2 c/ofork type

CR-M2SF 1SVR405651R130010

0.040 (0.088)

Standard socket for 2/4 c/o CR-M4SF 1SVR405651R3300 0.048 (0.106)

Plastic holder CR-MH 1SVR405659R1000 10 0.003 (0.007)

Metal holder CR-MH1 1SVR405659R1100 10 0.0005 (0.001)

Jumper bar for sockets with screw connection CR-MJ 1SVR405658R6000 10 0.029

(0.064)

Marker CR-MM 1SVR405658R1000 10 0.0005 (0.001)

Plug for test button replacement CR-MP 1SVR405658R2000 100 0.001 kg (0.002 lb)

2CD

C 2

91 0

09 F

0011

2CD

C 2

91 0

05 F

0007

CR-M4SS

CR-MJ

Ordering details – CR-M range with gold contacts and LED

Ordering details – CR-M range with gold contacts, LED and free-wheeling diode

CR-M

2CD

C 2

91 0

02 F

0015






























5


Pluggable interface relays and optocouplersOrdering details - CR-P/M function modules

Ordering details - CR-P/M range


Description Version Type Order code Price Pkg

qty

Weight(1 pc)

kg (lb)

6-220 V DC

Diode - Reverse polarity protection/free wheeling diode

A1+, A2- CR-P/M 22 1SVR405651R0000 10 0.003 (0.007)

6-24 V DCDiode and LED - Reverse polarity protection/free wheeling diode

red, A1+, A2- CR-P/M 42 1SVR405652R0000

10 0.003 (0.007)

green, A1+, A2- CR-P/M 42V 1SVR405652R1000

24-60 V DCred, A1+, A2- CR-P/M 42B 1SVR405652R4000green, A1+, A2- CR-P/M 42BV 1SVR405652R4100

110 V DCred, A1+, A2- CR-P/M 42C 1SVR405652R9000green, A1+, A2- CR-P/M 42CV 1SVR405652R9100

6-24 V AC/DC

Spark quenching

CR-P/M 52B 1SVR405653R0000

10 0.003 (0.007)

24-60 V AC/DC CR-P/M 52D 1SVR405653R4000

110 V AC/DC CR-P/M 52C 1SVR405653R1000

6-24 V AC/DC

Diode, LED and reverse polarity protection

red, for DC A1+, A2-

CR-P/M 62 1SVR405654R0000

10 0.003 (0.007)

green, for DC A1+, A2-

CR-P/M 62V 1SVR405654R1000

24-60 V AC/DC


CR-P/M 62E 1SVR405654R4000


CR-P/M 62EV 1SVR405654R4100

110 V DC 110-230 V AC


CR-P/M 92 1SVR405654R0100


CR-P/M 92V 1SVR405654R1100

6-24 V AC/DC

Varistor and LED Overvoltage protection


CR-P/M 62C 1SVR405655R0000

10 0.003 (0.007)


CR-P/M 62CV 1SVR405655R1000

24-60 V AC/DC


CR-P/M 62D 1SVR405655R4000


CR-P/M 62DV 1SVR405655R4100

110 V DC 110-230 V AC


CR-P/M 92C 1SVR405655R0100


CR-P/M 92CV 1SVR405655R1100

24 V ACOvervoltage protection

CR-P/M 72 1SVR405656R000010 0.002

(0.004)115 V AC CR-P/M 72A 1SVR405656R1000230 V AC CR-P/M 82 1SVR405656R2000

Connection diagrams

2CD

C 2

92 0

13 F

0005

CR-P/M 22

2CD

C 2

92 0

14 F

0005

CR-P/M 42, CR-P/M 42B, CR-P/M 42C, CR-P/M 42V, CR-P/M 42BV, CR-P/M 42CV

2CD

C 2

92 0

15 F

0005

CR-P/M 52B, CR-P/M 52C CR-P/M 52D,

2CD

C 2

92 0

16 F

0005

CR-P/M 62, CR-P/M 62E, CR-P/M 92, CR-P/M 62V, CR-P/M 62EV, CR-P/M 92V

2CD

C 2

92 0

17 F

0005

CR-P/M 62C, CR-P/M 62D, CR-P/M 92C, CR-P/M 62CV, CR-P/M 62DV CR-P/M 92CV

2CD

C 2

92 0

18 F

0005

CR-P/M 72, CR-P/M 82 CR-P/M 72A,

CR-P/M ...

2CD

C 2

91 0

05 S

0011


























5


Pluggable interface relays and optocouplersOrdering details - CR-U range

Ordering details - CR-U range without LEDRated control supply voltage



qty

Weight(1 pc)kg (lb)

12 V DC

2 c/o (SPDT) 250 V, 10 A

CR-U012DC2 1SVR405621R4000

10 0.083 (0.183)

24 V DC CR-U024DC2 1SVR405621R100048 V DC CR-U048DC2 1SVR405621R6000110 V DC CR-U110DC2 1SVR405621R8000220 V DC CR-U220DC2 1SVR405621R900024 V AC CR-U024AC2 1SVR405621R000048 V AC CR-U048AC2 1SVR405621R5000110 V AC CR-U110AC2 1SVR405621R7000120 V AC CR-U120AC2 1SVR405621R2000230 V AC CR-U230AC2 1SVR405621R300012 V DC

3 c/o (SPDT) 250 V, 10 A

CR-U012DC3 1SVR405622R4000

10 0.083 (0.183)

24 V DC CR-U024DC3 1SVR405622R100048 V DC CR-U048DC3 1SVR405622R6000110 V DC CR-U110DC3 1SVR405622R8000125 V DC CR-U125DC3 1SVR405622R8200220 V DC CR-U220DC3 1SVR405622R900024 V AC CR-U024AC3 1SVR405622R000048 V AC CR-U048AC3 1SVR405622R500060 V AC CR-U060AC3 1SVR405622R5200110 V AC CR-U110AC3 1SVR405622R7000120 V AC CR-U120AC3 1SVR405622R2000230 V AC CR-U230AC3 1SVR405622R3000

Ordering details - CR-U range with LEDRated control supply voltage



qty

Weight(1 pc)kg (lb)

12 V DC

2 c/o (SPDT) 250 V, 10 A

CR-U012DC2L 1SVR405621R4100

10 0.083 (0.183)

24 V DC CR-U024DC2L 1SVR405621R110048 V DC CR-U048DC2L 1SVR405621R6100110 V DC CR-U110DC2L 1SVR405621R8100220 V DC CR-U220DC2L 1SVR405621R910024 V AC CR-U024AC2L 1SVR405621R010048 V AC CR-U048AC2L 1SVR405621R5100110 V AC CR-U110AC2L 1SVR405621R7100120 V AC CR-U120AC2L 1SVR405621R2100230 V AC CR-U230AC2L 1SVR405621R310012 V DC

3 c/o (SPDT) 250 V, 10 A

CR-U012DC3L 1SVR405622R4100

10 0.083 (0.183)

24 V DC CR-U024DC3L 1SVR405622R110048 V DC CR-U048DC3L 1SVR405622R6100110 V DC CR-U110DC3L 1SVR405622R8100220 V DC CR-U220DC3L 1SVR405622R910024 V AC CR-U024AC3L 1SVR405622R010048 V AC CR-U048AC3L 1SVR405622R5100110 V AC CR-U110AC3L 1SVR405622R7100120 V AC CR-U120AC3L 1SVR405622R2100230 V AC CR-U230AC3L 1SVR405622R3100

CR-U

CR-U2S

2CD

C 2

91 0

47 F

0004

2CD

C 2

91 0

07 S

0011

Ordering details - AccessoriesVersion Type Order code Price Pkg

qty

Weight(1 pc)kg (lb)

Socket for 2 c/o and module CR-U2S 1SVR405670R0000

10

Socket for 3 c/o and module CR-U3S 1SVR405660R0000Socket for 3 c/o CR-U3E 1SVR405660R0100

Socket small for 2 c/o CR-U2SM 1SVR405670R1100

Socket small for 3 c/o CR-U3SM 1SVR405660R1100

Holder for CR-U socket CR-UH 1SVR405669R0000

Further documentation CR-U range on www.abb.com

















































5


Pluggable interface relays and optocouplersOrdering details - CR-U function modules

Ordering details - CR-U rangeRated control supply voltage

Description Version Type Order code Price Pkg

qty

Weight(1 pc)

kg (lb)

6-220 V DC

Diode - Reverse polarity protection/free wheeling diode

A1+, A2- CR-U 21 1SVR405661R0000 10 0.007 (0.015)

6-24 V DCDiode and LED - Reverse polarity protection/free wheeling diode

red, A1+, A2- CR-U 41 1SVR405662R0000

10 0.007 (0.015)

green, A1+, A2- CR-U 41V 1SVR405662R1000

24-60 V DCred, A1+, A2- CR-U 41B 1SVR405662R4000

green, A1+, A2- CR-U 41BV 1SVR405662R4100

110 V DCred, A1+, A2- CR-U 41C 1SVR405662R9000

green, A1+, A2- CR-U 41CV 1SVR405662R91006-24 V AC/DC

Spark quenching

CR-U 51B 1SVR405663R0000

10 0.007 (0.015)

24-60 V AC/DC CR-U 51D 1SVR405663R4000

110 V AC/DC CR-U 51C 1SVR405663R1000

6-24 V AC/DC

Diode and LED


CR-U 61 1SVR405664R0000

10 0.007 (0.015)


CR-U 61V 1SVR405664R1000

24-60 V AC/DC


CR-U 61E 1SVR405664R4000


CR-U 61EV 1SVR405664R4100

110 V DC 110-230 V AC


CR-U 91 1SVR405664R0100


CR-U 91V 1SVR405664R1100

6-24 V AC/DC

Varistor and LED Overvoltage protection


CR-U 61C 1SVR405665R0000

10 0.007 (0.015)


CR-U 61CV 1SVR405665R1000

24-60 V AC/DC


CR-U 61D 1SVR405665R4000


CR-U 61DV 1SVR405665R4100

110 V DC 110-230 V AC


CR-U 91C 1SVR405665R0100


CR-U 91CV 1SVR405665R1100

24 V AC Overvoltage protection, varistor

CR-U 71 1SVR405666R0000

10 0.007 (0.015)

115 V AC CR-U 71A 1SVR405666R1000230 V AC CR-U 81 1SVR405666R2000

24-240 V AC/DC Multifunction time module

pluggable onto CR-U2S and CR-U3S

CR-U T 1SVR405667R0000 10 0.014 (0.031)

CR-U...

2CD

C 2

91 0

04 S

0011

2C

DC

291

032

F00

05

CR-U T

Connection diagrams

2CD

C 2

92 0

13 F

0005

CR-U 21

2CD

C 2

92 0

14 F

0005

CR-U 41, CR-U 41B, CR-U 41C, CR-U 41V, CR-U 41BV, CR-U 41CV

2CD

C 2

92 0

15 F

0005

CR-U 51B, CR-U 51C CR-U 51D

2CD

C 2

92 0

16 F

0005

CR-U 61, CR-U 61E, CR-U 91, CR-U 61V, CR-U 61EV, CR-U 91V

2CD

C 2

92 0

17 F

0005

CR-U 61C, CR-U 61CV, CR-U 61D, CR-U 61DV, CR-U 91C, CR-U 91CV

2CD

C 2

92 0

18 F

0005

CR-U 71, CR-U 71A , CR-U 81

All CR-U modules can be plugged onto sockets CR-U2S and CR-U3S.



























5


Pluggable interface relays and optocouplersTechnical data - CR-P, CR-M, CR-U

Input circuit - coil data

Rated control supply voltage US

Rated frequency

Make voltage (at 20 °C)

Maximu voltage (at 55 °C)

Break voltage

Rated power Coil resistance (at 20 °C)

Tolerance of coil resistance

DC coils 12 V DC - 8.4 V DC 30.6 V DC 0.1 US0.4-0.48 W 360 10%

24 V DC - 16.8 V DC 61.2 V DC 0.1 US0.4-0.48 W 1440 10%

48 V DC - 33.6 V DC 122.4 V DC 0.1 US0.4-0.48 W 5700 10%

110 V DC - 77 V DC 280 V DC 0.1 US0.4-0.48 W 25200 10%

AC coils 24 V AC 50 / 60 Hz 19.2 V AC 28.8 V AC 0.15 US0.75 VA 400 10%

48 V AC 50 / 60 Hz 38.4 V AC 57.6 V AC 0.15 US0.75 VA 1550 10%

110 V AC 50 / 60 Hz 88 V AC 132 V AC 0.15 US0.75 VA 8900 10%



CR-P range

CR-M range


Rated frequency


Maximum voltage (at 55 °C)

Break voltage



DC coils 12 V DC - 9.6 V DC 13.2 V DC 0.1 US0.9 W 160 10%

24 V DC - 19.2 DC 26.4 V DC 0.1 US0.9 W 640 10%

48 V DC - 38.4 V DC 52.8 V DC 0.1 US0.9 W 2600 10%

60 V DC - 48 V DC 66 V DC 0.1 US0.9 W 4000 10%

110 V DC - 88 V DC 121 V DC 0.1 US0.9 W 13600 10%

125 V DC - 100 V DC 137.5 V DC 0.1 US0.9 W 16000 10%

220 V DC - 176 V DC 242 V DC 0.1 US0.9 W 54000 10%

AC coils 24 V AC 50 / 60 Hz 19.2 V AC 26.4 V AC 0.2 US1.6 VA 158 10%

48 V AC 50 / 60 Hz 38.4 V AC 52.8 V AC 0.2 US1.6 VA 640 10%






Rated frequency


Maximum voltage (at 55 °C)

Break voltage



DC coils 12 V DC - 9.6 V DC 13.2 V DC 0.1 Us 1.5 W 110 10 %24 V DC - 19.2 V DC 26.4 V DC 0.1 Us 1.5 W 430 10 %48 V DC - 38.4 V DC 52.8 V DC 0.1 Us 1.5 W 1750 10 %110 V DC - 88.0 V DC 121.0 V DC 0.1 Us 1.5 W 9200 10 %125 V DC - 100 V DC 137.5 V DC 0.1 Us 1.5 W 11000 10 %220 V DC - 176.0 V DC 242.0 V DC 0.1 Us 1.5 W 37000 10 %

AC coils 24 V AC 50 / 60 Hz 19.2 V AC 26.4 V AC 0.15 US2.8 VA (50 Hz)2.5 VA (60 Hz)

75 10 %

48 V AC 50 / 60 Hz 38.4 V AC 52.8 V AC 0.15 US2.8 VA (50 Hz)2.5 VA (60 Hz)

305 10 %


475 10 %


1700 10 %


1910 10 %


7080 10 %

CR-U range

5


Type CR-P...1 CR-P...2 CR-M...2 CR-M...3 CR-M...4 CR-U...2 CR-U...3

Output circuit(s) 11-12/14 11-12/14 21-22/24

11-12/1421-22/24

11-12/1421-22/2431-32/34

11-12/1421-22/2431-32/3441-42/44

11-12/1431-32/34

11-12/1421-22/2431-32/34

Kind of output Relay, 1 c/o Relay, 2 c/o Relay, 2 c/o Relay, 3 c/o Relay, 4 c/o Relay, 2 c/o Relay, 3 c/o

Contact material AgNi AgNi AgNi/Au 5 µm AgNi AgNi AgNi

AgNi/Au 5 µm AgNi

Rated operational voltage Ue (VDE 0110, IEC 60947-1) 250 V

Minimum switching voltage 5 V 10 V (AgNi); 5 V (AgNi/Au) 10 V

Maximum switching voltage DC 300 V DC 250 V DC

AC 440 V AC 250 V AC 440 V AC

Minimum switching current 5 mA (AgNi), 2 mA (AgNi/Au) 5 mA (AgNi) 5 mA (AgNi) 2 mA (AgNi/Au) 5 mA

Rated free air thermal current Ith 16 A 8 A 12 A 10 A 6 A 10 A

Rated operationalcurrent (IEC 60947-5-1)

AC-12 (resistive) 230 V 16 A 8 A 12 A 10 A 6 A 10 AAC-15 (inductive) 230 V 1.5 A 1.5 A 1.5 A 1.5 A 1 A 1.5 AAC-15 (inductive) 120 V 3 A 1.5 A 3 A

DC-12 (resistive) 24 V 16 A 8 A 12 A 10 A 6 A 10 A DC-13 (inductive) 24 V 2.5 A 2 A 2.5 A 2.5 A 2 A 2 A

DC-13 (inductive) 120 V 0.22 ADC-13 (inductive) 250 V 0.1 A

AC rating (UL 508)

Utilization category (pilot duty)(Contact rating code designation) B300 B300 B300

max. rated operational voltage 300 V AC 300 V AC 300 V AC

Max. continuous thermal currentat utilization category 5 A 5 A 5 A 2.5 A 5 A

Max. making / breaking apparentpower at utilization category 3600 / 360 VA 3600 / 360 VA 1800 /

180 VA 3600/360 VA

Utilization category (resistive)(CSA22.2 No.14....)

16 A, 250 V AC

8 A, 250 V AC

10 A, 250 V AC12 A, 150 V AC

6 A, 250 V AC10 A, 150 V AC

5 A, 250 V AC10 A, 150 V AC

10 A, 250 V AC (resistive + single-phase)

DC rating *

(UL 508; NEMA ICS-5)

Utilization category (pilot duty)(Contact rating code designation) R300

Max. rated operational voltage 300 V DC

Max. continuous thermal currentat utilization category 1 A

Max. making / breaking apparent power at utilization category 28 VA

Utilization category (resistive)(CSA22.2 No.14....) - 10 A, 24 V DC - 10 A, 28 V DC

Maximum making (inrush) current 30 A 15 A 24 A 20 A 12 A 20 A

Minimum switching power 0.3 W (AgNi), 0.05 W (AgNi/Au) 0.3 W (AgNi), 0.1 W (AgNi/Au) 0.3 W

Maximum switching (breaking) power

AC1 (resistive) 4000 VA 2000 VA 3000 VA 2500 VA 1500 VA 2500 VA

Contact resistance 100 m

Maximum operating frequency

rated load AC-1 600 switching cycles/h 1200 switching cycles/h

without load 72000 switching cycles/h 18000 switching cycles/h 12000 switching cycles/h

Mechanical lifetime > 3 x 107 switching cycles > 2 x 107 switching cycles

Electrical lifetime electrical AC1 (resistive)

> 0.7 x 105

switching cycles (16 A, 250 V)

> 105

switching cycles (8 A, 250 V)

> 105 switching cycles> 105 switching cycles (12 A, 250 V)(12 A, 250 V) (10 A, 250 V) (6 A, 250 V)

cos ϕ see reduction factor F

Response time typ. 7 ms typ. 13 ms (DC),10 ms (AC) typ. 18 ms (DC), 12 ms (AC)

Release time typ. 3 ms typ. 3 ms (DC), 8 ms (AC) typ. 7 ms (DC), 10 ms (AC)

Isolation data

Rated insulation voltage 400 V AC 250 V AC

Insulation class C250 / B400 C250 / B250 C250

Rated impulsewithstand voltage Uimp

between coil and contacts 5 kV 2.5 kV

between open contacts 1 kV 1.5 kV

between c/o (SPDT) contacts - 2.5 kV 2.5 kV 2 kV 2 kV

Clearance between coil and contacts 10 mm 2.5 mm 1.6 mm 3 mm

Creepage distance between coil and contacts 10 mm 4 mm 3.2 mm 4.2 mm

Overvoltage category III III II III

Pollution degree 3 3 2 3

Pluggable interface relays and optocouplersTechnical data - CR-P, CR-M, CR-U

* Those ratings are based on different type tests but they are not covered by the cULus or CSA approvals.

5


Type CR-P...1 CR-P...2 CR-M...2 CR-M...3 CR-M...4 CR-U...2 CR-U...3

General data

Dimensions see 'Dimensional drawings'

Mounting on socket (see accessories)

Mounting position any

Degree of protection IP 67 IP 40

Electrical connection

Connection by socket

Environmental data

Ambient temperature range operation DC: -40...+85 °; AC: -40...+70 °C DC: -40...+70 °; AC: -40...+55 °C

storage -40 ... +85 °C

Vibration resistance 10-150 Hz

n/o contact 10 g 5 g 5 g

n/c contact 10 g 5 g 5 g 5 g

Shock resistance n/o contact 30 g 20 g 10 g 10 g

n/c contact 30 g 20 g 5 g 10 g

Standards/Directives

Standards IEC/EN 61810-1

Low Voltage Directive - 2014/35/EU

RoHS Directive 2011/65/EU

Load limit curves - Maximum switching power at resistive DC load

CR-P with 1 c/o contact CR-P with 2 c/o contacts CR-U with 2 and 3 c/o contacts

CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-M with 4 c/o contacts

2CD

C 2

92 0

05 F

0204

DC

cur

rent

[A]

DC voltage [V]

2CD

C 2

92 0

10 F

0204

DC

cur

rent

[A]

DC voltage [V]

1 = resistive load, T = 0 ms

2 = inductive load, T = 40 ms

2CD

C 2

92 0

28 F

0204

DC voltage [V]

DC

cur

rent

[A]

2CD

C 2

92 0

15 F

0204

DC

cur

rent

[A]

DC voltage [V]

1 = resistive load, T = 0 ms

2 = inductive load, T = 40 ms

2CD

C 2

92 0

19 F

0204

DC voltage [V]

DC

cur

rent

[A]

2CD

C 2

92 0

23 F

0204

DC voltage [V]

DC

cur

rent

[A]

Pluggable interface relays and optocouplersTechnical data, load limit curves - CR-P, CR-M, CR-U

5


Pluggable interface relays and optocouplersTechnical data - CR-P optocouplers

Input circuits CR-P024MOS1 CR-P024TRI1

Input resistance 2200 1950

Rated control voltage 24 V DC 24 V DC

Pull-in voltage 10 V DC 10 V DC

Maximum input voltage 32 V DC 32 V DC

Nominal input current 10 mA 12 mA

Input power 260 mW 295 mW

Typical switching-on time 50 ms < 1/2 cycle

Typical switch-off time 250 ms < 1/2 cycle

Output

Output circuits 11 (13+) - 14 11 (13+) - 14

Kind of output MOS-FET Triac

Rated operational voltage 24 V DC 240 V AC

Maximum switching voltage 35 V DC 275 V AC

Minimum switching current 1 mA 50 mA

Maximum switching current continously 5 A 3,5 A

Leakage current at maximum switching voltage 10 uA 1 mA

Voltage drop at rated current 300 mV 1,1 V

Isolation data

Rated insulation voltage input/output 2,5 kV 2,5 kV

Insulation class 2 2

Clearance input/output 19 mm 19 mm

Creepage distance input/output 19 mm 19 mm

Overvoltage category III III

Polution degree 2 2

General data

Dimensions see 'Dimensional drawings'

Weight 11 g (0.618 lbs) 11 g (0.618 lbs)

Mounting on socket on socketEnviromental data

Ambient temperature operational -20…+80 °C -20…+80 °C

storage -40…+100 °C -40…+100 °C

Standards/ Directives

Standards IEC/EN 62314 IEC/EN 62314

EMC Directive 2014/30/EU 2014/30/EU

RoHS Directive 2011/65/EU 2011/65/EU

-20 0 20 40 60 80 1000

1

2

3

4

5

6

Ambient temperature (°C)

Curr

ent (

A)

2CD

C 2

92 0

01 F

0017

1 = Stand alone installed

2 = Side by side installed

-20 0 20 40 60 80 1000

0,5

1

1,5

2

2,5

3

3,5

4


Curr

ent

(A)

2CD

C 2

92 0

02 F

0017

1 = Stand alone installed

2 = Side by side installed

Derating curves

MOS-FET output Triac output

5


Pluggable interface relays and optocouplersTechnical data - Sockets for CR-P and CR-M

Output circuits CR-PLS CR-PLSx CR-PSS CR-PLC CR-MxLS CR-MxSS CR-MxSF CR-MxLCOutput circuits 11-12/14, 21-22/24 11-12/14, 21-22/24, ...Number of poles 2 2, 3 or 4 2 or 4Rated voltage 250 V AC 300 V AC 250 V AC 250 V AC 300 V AC

Rated current 2 x 10 A1) 2 x 12 A1) 2 x 10 A1) 7 A 10 A

General dataDimensions see 'Dimensional drawings'

Degree of protection terminals IP 20 B (EN 60529)Temperature range operation -40...+70 °C -40...+85 °C -40...+70 °C -40...+70 °C -25...+85 °C

storage -40...+70 °C -40...+85 °C -40...+70 °C -40...+70 °CConnection type screw connection spring

connectionscrew connection fork type

screwspring connection

Maximum number of wires per connecting terminal

2 2 (one perconnection point)

2 - 2 (one perconnection point)

Connecting capacity

rigid 2 x 0.5 - 2.5 mm2 (2 x 20 - 14 AWG) 2 x 0.2 - 1.5 mm2 (2 x 24 - 16 AWG)

2 x 0.5 - 2.5 mm2 (2 x 20 - 14 AWG) 2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG)

fine-strand

with wire end ferrule 2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG)

2 x 1.5 mm2 (2 x 16 AWG)

2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG)

2 x 1.5 mm2 (2 x 16 AWG)

2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG) 2 x 1.5 mm2 (2 x 16 AWG)

Stripping length 7 mm (0.28 in) 11 mm (0.43 in)

7 mm (0.28 in) 10 mm (0.39 in)

Tightening torque 0.6 Nm 0.8 Nm 0.6 Nm 0.6 Nm (5.31 lb.in)Maximum clamping force

with 0,2 mm2 - - - 10 N - - - 10 Nwith 1,5 mm2 - - - 40 N - - - 40 N

with wire end ferrule - - - - > 40 NMounting DIN rail (IEC/EN 60715)Material socket PA 6+GF - V2 PA 6+GF - V2

contacts CuZn33 CuZn33contact surface 5 μ Ni 5 μ tinned 5 μ Ni 5 μ Ni 6 μ Ni 5 μ tinned

terminals 8 μ Ni 8 μ galvanized 8 μ Ni XCrNi Steel 8 μ Ni CCSCcombi screw M3 8.8 Steel, 5μ Ni - 8.8 Steel, 5μ Ni -

Isolation dataInsulation voltage > 5 kV > 3 kV > 5 kV > 3 kV > 4 kVIsolation between coil and contacts

IEC/EN 61984

Clearance and creepage distance IEC/EN 61984

Standards/DirectivesStandards IEC/EN 61984Low Voltage Directive 2014/35/EURoHS Directive 2011/65/EU

1) Loads >10 A ( >12 A for CR-PLSx) require jumpering of terminal 11 with 21, 12 with 22, and 14 with 24

5


Pluggable interface relays and optocouplersTechnical data - Sockets for CR-U

Output circuits CR-U2S CR-U3S CR-U3E CR-UxSMOutput circuits 11-12/14, 21-22/24,...Number of poles 2 3 2 or 3Rated voltage 250 V AC 300 V AC 250 V

Rated current 10 A

General dataDimensions see 'Dimensional drawings'Degree of protection terminals IP 20 B (EN 60529)Temperature range operation -40...+70 °C -40...+85 °C -40...+70 °C

storage -40...+70 °C -40...+85 °C -40...+70 °CConnecting capacity

rigid 2 x 2 x 0,5 - 2,5 mm2 (2 x 20 - 14 AWG)

fine-strand

with wire end ferrule 2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG) 2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG)

2 x 0.5 - 1.5 mm2 (2 x 20 - 16 AWG)

Stripping length 7 mm (0.28 in)Tightening torque 0.6 Nm 0.8 Nm 0.6 NmMounting DIN rail (IEC/EN 60715)Material socket PA 6+GF - V2

contacts CuZn33contact surface 6 μ Ni 3 μ Ni

terminals 8 μ Ni 8 μ galvanized 10 μ Nicombi screw M3 8.8 Steel, 5μ Ni Steel, 8 μ Ni

Isolation dataInsulation voltage > 2 kVIsolation between coil and contacts

IEC/EN 61984

Clearance and creepage distance IEC/EN 61984Standards/DirectivesStandards IEC/EN 61984Low Voltage Directive 2014/35/EURoHS Directive 2011/65/EU

5


Load limit curves - Electrical lifetime at resistive AC load

CR-P with 1 c/o contact CR-P with 2 c/o contacts CR-U with 2 and 3 c/o contacts

CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-M with 4 c/o contacts

2CD

C 2

92 0

03 F

0204

Sw

itchi

ng c

ycle

s

Switching power [kVA]

2CD

C 2

92 0

09 F

0204

Sw

itchi

ng c

ycle

s


2CD

C 2

92 0

27 F

0204

Sw

itchi

ng c

ycle

s


2CD

C 2

92 0

13 F

0204

Sw

itchi

ng c

ycle

s


2CD

C 2

92 0

18 F

0204

Sw

itchi

ng c

ycle

s


2CD

C 2

92 0

22 F

0204

Sw

itchi

ng c

ycle

s


Reduction factor F at inductive AC load

2CD

C 2

92 0

04 F

0204

Red

uctio

n fa

ctor

Power factor

2CD

C 2

92 0

14 F

0204

Red

uctio

n fa

ctor

Power factor Power factor

Red

uctio

n fa

ctor

2CD

C 2

92 0

29 F

0204

CR-P CR-M CR-U

Pluggable interface relays and optocouplersLoad limit curves - CR-P, CR-M and CR-U

5


Pluggable interface relays and optocouplersTechnical data - CR-S interface relays

Rated control supply voltage Us

Make voltage(at 23 °C)

Maxium voltage (at 55 °C)

Break voltage Rated power Coil resistance (at 23 °C)


CR-S005VDC1R(G) 5 V DC 3.75 V DC 7.5 V DC 0.25 V DC 170 mW 147 Ω ± 10 %

CR-S012VDC1R(G) 12 V DC 9 V DC 18 V DC 0.6 V DC 170 mW 848 Ω ± 10 %



CR-S060VDC1R(G) 60 V DC 45 V DC 90 V DC 3 V DC 210 mW 16600 Ω ± 15 %

Output circuits

Output circuits 11-12/14Kind of output 1 c/o (SPDT)Contact material AgSnO2 / AgSnO2/Au

Rated operational voltage Ue (IEC/EN 60947-1) 250 V AC

Minimum switching voltage 12 V DCMaximum switching voltage 400 V AC / 125 V DCMinimum switching current 100 mA (AgSnO2) / 10 mA (AgSnO2/Au)

Rated free air thermal current Ith 5 A

Rated operational current (IEC/EN 60947-5-1) AC12 (resistive) 230 V 6 AAC15 (inductive) 230 V 1.5 AAC15 (inductive) 120 V 3 ADC12 (resistive) 24 V 6 ADC13 (inductive) 24 V 1 ADC13 (inductive) 120 V 0.22 ADC13 (inductive) 250 V 0.11 A

AC rating (UL 508; NEMA ICS-5) Utilization category (pilot duty) (Contact rating code designation)

B300

DC rating (UL 508; NEMA ICS-5) Utilization category (pilot duty) (Contact rating code designation)

R300

Maximum making (inrush) current 15 A, 240 V ACMinimum switching power 100 mA/12 V (AgSnO2) / 50 mW (AgSnO2/Au)

Maximum switching (breaking) power AC1 (resistive) 1500 VA, 250 V ACContact resistance 100 mW (at 1 A/ 6 V DC)Maximum operating frequency rated load AC1 360 switching cycles/h

without load 18000 switching cycles/hMechanical lifetime 1 x 107 switching cyclesElectrical lifetime AC1 (resistive) (n/c) 3 x 104 switching cycles (at +85 °C)

(n/o) 1 x 104 switching cycles (at +85 °C) Response time 8 msRelease time 4 msIsolation dataRated insulation voltage 250 V ACRated impulse withstand voltage Uimp between coil and contacts 4000 V 1 min

between open contacts 1000 V 1 minClearance between coil and contacts 5.5 mm (0.217 in)Creepage distance between coil and contacts 8 mm (0.315 in)Overvoltage category IIIPollution degree 2General dataDimensions see 'Dimensional drawings'Mounting on socketMounting position anyDegree of protection RT II and RT IIIElectrical connectionConnection by socketEnvironmental dataAmbient temperature range operation -40...+85 °C

storage -40...+85 °CVibration resistance (10-150 Hz) n/o contact 10 Hz to 55 Hz 1mm DA

n/c contact 10 Hz to 55 Hz 1mm DAShock resistance n/o contact Functional 49 m/s² / Destructive 980 m/s²

n/c contact Functional 49 m/s² / Destructive 980 m/s²

Standards/DirectivesStandards IEC/EN 61810-1RoHS Directive 2011/65/EU

5


Pluggable interface relays and optocouplersTechnical data - CR-S optocouplers

Input circuits CR-S024VDC1TRA CR-S024VDC1MOS CR-S024VDC1TRIInput resistance 3400 OhmRated control voltage 24 V DC*Pull-in voltage 15 V DCMaximum input voltage 30 V DCNominal input current 7 mAInput power 168 mWTypical switching-on time < 40 ms < 60 ms < 1/2 cycleTypical switch-off time < 600 ms < 600 ms < 1/2 cycleOutputOutput circuits 11 (13+) - 14 11 (13+) - 14 11 (13+) - 14Kind of output Transistor MOS-FET TriacRated operational voltage 48 V DC 24 V DC 240 V ACMaximum switching voltage 48 V DC 24 V DC 275 V ACMinimum switching current 50 mA 50 mA 22 mAMaximum switching current continously 100 mA 2 A 2 ALeakage current at maximum switching voltage <1 mA <1 mA < 1.5 mAVoltage drop at rated current < 120 mV DC < 120 mV DC < 1.6 V ACIsolation data Rated insulation voltage input/output 2,5 kVInsulation class 2Clearance input/output 14 mmCreepage distance input/output 14 mmOvervoltage category IIIPolution degree 2General dataDimensions see 'Dimensional drawings'Weight 3.5 g (0.007 lb)Mounting on socketEnviromental dataAmbient temperature operational -30…+80 °C

storage -40…+100 °CStandards/ DirectivesStandards IEC/EN 62314EMC Directive 2014/30/ENRoHS Directive 2011/65/EN

* The output circuit should not exceed 30 m

Technical Diagrams CR-S interface reays

DC

cur

rent

(A)

DC voltage (V)

100.1

0.2

0.5

1

2

5

10

20 50 100 200

2CD

C 2

92 0

12 F

0214

Contact current (A)

Op

erat

ions

(*1

00

0 o

ps)

0

5

10

50

100

1 2 3 4 5 6 7 8

2CD

C 2

92 0

13 F

0214

Max. DC load breaking capacity Endurance curve

Technical Diagrams - CR-S optocouplers


Cur

rent

(mA

)

-20 0

20

40

60

80

100

120

20 40 60 80 100 120

2CD

C 2

92 0

05 F

0016


Cur

rent

(A)

0

2

1

3

4

20 30 40 50 60 70 80 9010

2CD

C 2

92 0

06 F

0016


Cur

rent

(A)

1.0

0.5

1.5

2

20-20 40 60 80 1000

2CD

C 2

92 0

07 F

0016

Derating curve Transistor output Derating curve MOS-FET output Derating curve Triac output

5


Pluggable interface relays and optocouplersTechnical data - CR-S range sockets

Input circuits CR-S 6-24 V CR-S 12-24 V CR-S 48-60 V CR-S 110-125 V CR-S 220-240 V

Rated control supply voltage Us 6-24 V DC 12-24 V AC/DC* 48-60 V AC/DC 110-125 V AC/DC 220-240 V AC/DC

Rated control supply voltage Us tolerance (0.8-1.2) Un (0.8-1.1) Un

Typical current 11-29 mA 11-16 mA 3.6-4.5 mA 3.6 mA 3.6 mAResponse time 8 msRelease time 4 msStatus device green LEDProtective circuit yesOutput circuits

Output circuits 11-12/14Number of poles 1Rated voltage 250 V ACRated current 6 AGeneral data for CR-S with screw connection terminal

Dimensions see 'Dimensional drawings'Degree of protection (EN 60529) Degree of protection (EN 60529) IP20 (terminals)Temperature range operation -40...+70 °C -40...+55 °C

storage -40...+85 °CConnection type ScrewMaximum nuber of wires per connection terminal 2

Connecting capacity rigid 2 x 0.5 - 1.5 mm² (2 x 20 - 16 AWG)fine-strand

with wire end ferule 2 x 0.5 - 1 mm² (2 x 20 - 18 AWG)Tightening torque 0.5 Nm (4.426 lb.in)Stripping length 7 mm (0.28 in)Mounting (IEC/EN 60715) DIN railMaterial socket PA6 +GF-V2

contacts CuZn36contact surface 3 μ Ni/Sn

terminals CuZn40, 3 μ Nicombi screw M3 Fe

General data for CR-S with spring connection terminalDimensions without holder (L x W x H) 88.3 x 6.3 x 70.9 mm (3.476 x 0.248 x 2.789 in)Degree of protection (EN 60529) Degree of protection (EN 60529) IP20 (terminals)Temperature range operation -40...+70 °C -40...+55 °C

storage -40...+85 °CConnection type SpringMaximum nuber of wires per connection terminal 1Connecting capacity 0.75 - 2.5 mm2 (20 - 14 AWG) rigid, fine-strand and with wire end ferruleStripping length 7 mm (0.28 in)Mounting (IEC/EN 60715) DIN railMaterial socket PA6 +GF-V2

contacts CuZn36contact surface 3 μ Ni/Snspring terminals SUS301

Isolation dataIsolation between coil and contacts 5000 V ACResistance to shock coil to contact 1000 MWClearance and creepage distance IEC/EN 61984Standards/DirectivesStandard IEC/EN 61984Low Voltage Directive 2014/35/EURoHS Directive 2011/65/EU

* In combination with optocouplers, only DC supply is allowed

5


CR-P with 1 c/o contact

CR-S optocoupler with Transistor

CR-S optocoupler with MOSFET

CR-S optocoupler with Triac

CR-M with 2 c/o contacts CR-M with 3 c/o contacts CR-U with 2 c/o contacts

CR-P with 2 c/o contacts CR-M with 4 c/o contacts CR-S CR-U with 3 c/o contacts

2CD

C 2

92 0

01 F

0004

2CD

C 2

92 0

01 F

0016

2CD

C 2

92 0

02 F

0016

2CD

C 2

92 0

01 F

0016

2CD

C 2

92 0

08 F

0004

A1+

A2 -

+11(13+)

14-

A1+

A2 -

+

-

11(13+)

14

A1+

A2

V AC

V AC-

11(13+)

14

2CD

C 2

92 0

11 F

0004

2CD

C 2

92 0

16 F

0004

2CD

C 2

92 0

20 F

0004

2CD

C 2

92 0

01 F

0014

2CD

C 2

92 0

24 F

0004

2CD

C 2

92 0

30 F

0004

Pluggable interface relays and optocouplersConnection diagrams

5


Dimensions in mm and inches

CR-M with 2 c/o contacts

CR-U with 2 c/o contacts

CR-P relay

CR-S relay

CR-M with 3 c/o contacts CR-M with 4 c/o contacts

CR-S optocoupler

CR-P optocoupler

CR-U with 3 c/o contacts

2CD

C 2

92 0

02 F

0004

2CD

C 2

92 0

52 F

0013

1 0.039

0.5 0.0200.9 0.035

0.5 0.02

0

3.78 0.1495.04 0.198

5 0.19716.38 0.645

28 1.102

15 0.591

3.5 0.13

8

1.8

5

1 1.3

28

0.8

3.8

0.15

0

0.59

115

1.102

0.0310.039

0.071

0.197

0.051

2CD

C 2

92 0

01 F

0015

2CD

C 2

92 0

02 F

0015

2CD

C 2

92 0

03 F

0015

2CD

C 2

92 0

04 F

0016

2CD

C 2

92 0

03 F

0017

2CD

C 2

92 0

25 F

0004

2CD

C 2

92 0

26 F

0004

Pluggable interface relays and optocouplersDimensional drawings

5


20.3

2

5.08

5.08

15.5

7.62

29.4

3.2

78.5

24

50

62

61

42.5



Relay

Jumper

CR-PLS - screw connection

CR-PLSx - screw connection

CR-PSS - screw connection

2CD

C 2

92 0

33 F

0004

2CD

C 2

92 0

53 F

0013

2CD

C 2

92 0

54 F

0013

2CD

C 2

92 0

03 F

0014

2CD

C 2

92 0

02 F

0014

CR-PLC - spring connectionCR-PJ

62

51,2

2915,87,5

76

20

10

Marker

Relay

Holder

Pluggable function module

42.8

15,8

24

76

10

20

Marker

Holder

Relay

Pluggablefunction module

2CD

C 2

92 0

06 F

0211

2CD

C 2

92 0

07 F

0211

7,62

97,5

25,9

20,3

2

5,08

5,08

24,4

16,3

33,8

43,5

34,4

1,51

0

10

R1

2±0,2

15,5±0,2

9x15 (=139,5)

141,5+1

6±

0,2

2CD

C 2

92 0

10 F

0011

2CD

C 2

92 0

12 F

0011

Pluggable function

module

Holder

76.6 3.016

73.2 2.882

3.5 0.138

35.4

1.394

94.7

3.728

6.2 0.244

6.3 0.248

123.2 4.850 2.8 0.110

0.8 0.031

16.7

0.657

6.7 0.264

70.9 2.791

6.3 0.272

44.2

1.74

52 2.047

69.4

2.732

88.3

3.476

28 1.102

35.4

1.394

55.4 2.181

35.8 1.409

92.7 3.650

35.7 1.406

20.6

0.811

40.2

1.583

59.8

2.354

71.1

2.799

Spring socket for CR-S range interface relays

Jumper bar CR-S

Screw socket for CR-S range interface relays Separator for CR-S

5




2CD

C 2

92 0

81 F

0004

CR-U2S - CR-U3S

CR-UxSM

CR-M2SS - CR-M3SS - CR-M4SS - screw connection

CR-M2LS - CR-M3LS - CR-M4LS - screw connection

CR-U3E

31

27 26

79,5

42,5

33,2

24

12,4

12,4

15

95

5,5

2CD

C 2

92 0

06 F

0005

30,3

66,7

35,4

29 max

19

CR-M2LC , CR-M4LC - spring connection

CR-MxSF - screw connectionCR-MJ

9 - M3

12 - M3

37,3 38,1

29,8 29,8

4

75,3

75,3

35,4

CR-U2S CR-U3S

27,2

27,2 27,2

75

,2

35

,4

24

42,6

Marker

Relay

Holder

Pluggable function module

2CD

C 2

92 0

08 F

0011

29,1

2442,6

7560,8

27,227,2 27,2

75 35,4

Marker

Relay

Holder

Pluggablefunction module

CR-M2LS CR-M3LS CR-M4LS

2CD

C 2

92 0

04 F

0211

2CD

C 2

92 0

05 F

0011

2CD

C 2

92 0

03 F

0211

11 - M3

27,8

38,126

61,8

4

35,4

27,8

38,1

CR-U2SM CR-U3SM

8 - M3

61,8

2CD

C 2

92 0

09 F

0011

246.

8

1

9,5

10

R1

9 x

27.2

(=24

4,8)

27.2

±0.

2

6±0,22±0,

2

2CD

C 2

92 0

11 F

0011

5


Boxed interface relays and optocouplers R600 rangeProduct group picture

5


Boxed interface relays and optocouplers R600 rangeTable of contents

Boxed interface relays and optocouplers R600 range

Overview 5/33


Boxed interface relays R600 range 5/35

Selection 5/35



Technical data 5/40

Dimensional drawings, Load limit curves 5/43

Boxed interface optocouplers R600 range 5/45

Selection 5/45



Technical data 5/49

Technical data, Dimensions 5/50

5


Boxed interface relays and optocouplers R600 rangeOverview

ABB’s R600 range of boxed interface relays and optocouplers are used for electrical isolation, amplification and signal matching between the control unit and the sensor/actuator level. The space saving design and different connection terminal possibilities optimize your panel installation.

The broad portfolio of R600 range offers the most suitable interface solution for your application.

Easy to installThe R600 interface relays and optocouplers are easy to mount by snapping onto a DIN-rail which is according to IEC/EN 60715. Time saving wiring thanks to jumper bar.

Global availabilityApplicable all over the world according to the highest standards. You will find R600 boxed interface relays and optocouplers in any application and every corner of the world.

Space savingThanks to the 6 mm slim and 70 mm short housing, you maximize the foot print of your panel. The 75 mm depth allows you use in a compact cabinet.

F H R a

Screw clamp module Spring clamp module

5


Boxed interface relays and optocouplers R600 rangeBenefits and advantages

Complete product line1 n/o, 1 n/c, 1 c/o, 2 c/o output configuration. Standard contact material for switching high current signals as well as gold-plated contacts for reliable switching of low current signals.

Optocoupler with Transistor, MOS-FET and Triac output for longer lifetime, higher reliability and quiet operation. Screw and spring connection terminals.

Marine certificationR600 range offers the LR approval, which allows usage of the boxed interface relays and optocouplers in many applications around the marine segment. The performance of the R600 range has proven by successfully passing tests required harshest conditions.

Safe operationHigh resistance to vibration and shock thanks to the relay soldered inside of the housing.Wrong relay replacement or relay lose not possible .Devices with immunity to the leakage currents.

Clear functioning statusGreen LED for status indication of the control supply voltage.

Leakage current protection

1 NO 1 SPDT

1 DPDT

Transistor MOS-FET Triac

1 NC

5


Boxed interface relays R600 rangeSelection

Ord

er n

um

ber

1SN

A645

034R

2300

1SN

A645

036R

2500

1SN

A645

534R

2500

1SN

A645

073R

0000

1SN

A645

035R

2400

1SN

A645

075R

0000

1SN

A645

535R

2600

1SN

A645

019R

0400

1SN

A645

519R

0600

1SN

A645

014R

2700

1SN

A645

018R

0300

1SN

A645

518R

0500

1SN

A645

514R

2100

1SN

A645

001R

0300

1SN

A645

005R

0700

1SN

A645

501R

0500

1SN

A645

505R

0100

1SN

A645

012R

2500

1SN

A645

512R

2700

1SN

A645

071R

0000

1SN

A645

571R

0000

1SN

A645

072R

0000

1SN

A645

572R

0000

1SN

A645

002R

0400

1SN

A645

006R

0000

1SN

A645

502R

0600

1SN

A645

506R

0200

1SN

A645

040R

1500

1SN

A645

540R

1700

1SN

A645

003R

0500

1SN

A645

007R

0100

1SN

A645

046R

0700

1SN

A645

503R

0700

1SN

A645

507R

0300

1SN

A645

041R

0200

1SN

A645

541R

0400

1SN

A645

016R

2100

1SN

A645

017R

2200

1SN

A645

004R

0400

1SN

A645

008R

1200

1SN

A645

011R

2400

1SN

A645

504R

0000

1SN

A645

508R

1400

1SN

A645

511R

2600

1SN

A645

013R

2600

1SN

A645

513R

2000

1SN

A645

020R

0100

1SN

A645

520R

0300

Typ

e

RB1

21P-

5VD

C

RB1

21PG

-5VD

C

RB

R121

P-5V

DC

RB1

21-1

2VD

C

RB1

21P-

12VD

C

RB1

21G

-12V

DC

RB

R121

P-12

VDC

RB1

01R

-24V

UC

RB

R101

R-2

4VU

C

RB1

11-2

4VU

C

RB1

11R

-24V

UC

RB

R111

R-2

4VU

C

RB

R111

-24V

UC

RB1

21-2

4VU

C

RB1

21G

-24V

UC

RB

R121

-24V

UC

RB

R121

G-2

4VU

C

RB1

22G

-24V

UC

RB

R122

G-2

4VU

C

RB1

21-2

4VD

C

RB

R121

-24V

DC

RB1

21G

-24V

DC

RB

R121

G-2

4VD

C

RB1

21-4

8-60

VUC

RB1

21G

-48-

60VU

C

RB

R121

-48-

60VU

C

RB

R121

G-4

8-60

VUC

RB1

22G

-48-

60VU

C

RB

R122

G-4

8-60

VUC

RB1

21-1

15VU

C

RB1

21G

-115

VUC

RB1

21R

-115

VUC

RB

R121

-115

VUC

RB

R121

G-1

15VU

C

RB1

22G

-115

VUC

RB

R122

G-1

15VU

C

RB1

11-1

15VU

C

RB1

11-2

30VU

C

RB1

21-2

30VU

C

RB1

21G

-230

VUC

RB1

21R

-230

VUC

RB

R121

-230

VUC

RB

R121

G-2

30VU

C

RB

R121

R-2

30VU

C

RB1

22G

-230

VUC

RB

R122

G-2

30VU

C

RB1

21-6

0-23

0VU

C

RB

R121

-60-

230V

UC

Input voltage

5 V DC J J J

12 V DC J J J J

24 V DC J J J J J J J J J J J J J J J J

48-60 V DC J J J J J J

115 V DC J J J J J J J J

230 V DC J J J J J J J J J

60-230 V DC J J

24 V AC J J J J J J J J J J J J

48-60 V AC J J J J J J

115 V AC J J J J J J J J

230 V AC J J J J J J J J J

60-230 V AC J J

Output rating

10 mA - 6 A J J J J J J J J J J J J J J J J J J J J J J J J J J J J

3 mA - 6 A J J J J J J J J J J J J

1 mA - 8 A J J J J J J J J

Output contacts

c/o 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1

n/o 1 1 1 1 1 1

n/c 1 1

Terminal type

Screw J J J J J J J J J J J J J J J J J J J J J J J J J J J

Spring J J J J J J J J J J J J J J J J J J J J J

http://new.abb.com/products/en/1SNA645034R2300
















































5


Ord

er n

um

ber

1SN

A645

034R

2300

1SN

A645

036R

2500

1SN

A645

534R

2500

1SN

A645

073R

0000

1SN

A645

035R

2400

1SN

A645

075R

0000

1SN

A645

535R

2600

1SN

A645

019R

0400

1SN

A645

519R

0600

1SN

A645

014R

2700

1SN

A645

018R

0300

1SN

A645

518R

0500

1SN

A645

514R

2100

1SN

A645

001R

0300

1SN

A645

005R

0700

1SN

A645

501R

0500

1SN

A645

505R

0100

1SN

A645

012R

2500

1SN

A645

512R

2700

1SN

A645

071R

0000

1SN

A645

571R

0000

1SN

A645

072R

0000

1SN

A645

572R

0000

1SN

A645

002R

0400

1SN

A645

006R

0000

1SN

A645

502R

0600

1SN

A645

506R

0200

1SN

A645

040R

1500

1SN

A645

540R

1700

1SN

A645

003R

0500

1SN

A645

007R

0100

1SN

A645

046R

0700

1SN

A645

503R

0700

1SN

A645

507R

0300

1SN

A645

041R

0200

1SN

A645

541R

0400

1SN

A645

016R

2100

1SN

A645

017R

2200

1SN

A645

004R

0400

1SN

A645

008R

1200

1SN

A645

011R

2400

1SN

A645

504R

0000

1SN

A645

508R

1400

1SN

A645

511R

2600

1SN

A645

013R

2600

1SN

A645

513R

2000

1SN

A645

020R

0100

1SN

A645

520R

0300

Typ

e

RB1

21P-

5VD

C

RB1

21PG

-5VD

C

RB

R121

P-5V

DC

RB1

21-1

2VD

C

RB1

21P-

12VD

C

RB1

21G

-12V

DC

RB

R121

P-12

VDC

RB1

01R

-24V

UC

RB

R101

R-2

4VU

C

RB1

11-2

4VU

C

RB1

11R

-24V

UC

RB

R111

R-2

4VU

C

RB

R111

-24V

UC

RB1

21-2

4VU

C

RB1

21G

-24V

UC

RB

R121

-24V

UC

RB

R121

G-2

4VU

C

RB1

22G

-24V

UC

RB

R122

G-2

4VU

C

RB1

21-2

4VD

C

RB

R121

-24V

DC

RB1

21G

-24V

DC

RB

R121

G-2

4VD

C

RB1

21-4

8-60

VUC

RB1

21G

-48-

60VU

C

RB

R121

-48-

60VU

C

RB

R121

G-4

8-60

VUC

RB1

22G

-48-

60VU

C

RB

R122

G-4

8-60

VUC

RB1

21-1

15VU

C

RB1

21G

-115

VUC

RB1

21R

-115

VUC

RB

R121

-115

VUC

RB

R121

G-1

15VU

C

RB1

22G

-115

VUC

RB

R122

G-1

15VU

C

RB1

11-1

15VU

C

RB1

11-2

30VU

C

RB1

21-2

30VU

C

RB1

21G

-230

VUC

RB1

21R

-230

VUC

RB

R121

-230

VUC

RB

R121

G-2

30VU

C

RB

R121

R-2

30VU

C

RB1

22G

-230

VUC

RB

R122

G-2

30VU

C

RB1

21-6

0-23

0VU

C

RB

R121

-60-

230V

UC

Input voltage

5 V DC J J J

12 V DC J J J J

24 V DC J J J J J J J J J J J J J J J J

48-60 V DC J J J J J J

115 V DC J J J J J J J J

230 V DC J J J J J J J J J

60-230 V DC J J

24 V AC J J J J J J J J J J J J

48-60 V AC J J J J J J

115 V AC J J J J J J J J

230 V AC J J J J J J J J J

60-230 V AC J J

Output rating

10 mA - 6 A J J J J J J J J J J J J J J J J J J J J J J J J J J J J

3 mA - 6 A J J J J J J J J J J J J

1 mA - 8 A J J J J J J J J

Output contacts

c/o 1 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 2 2 1 1 1 1 1 1 2 2 1 1

n/o 1 1 1 1 1 1

n/c 1 1

Terminal type

Screw J J J J J J J J J J J J J J J J J J J J J J J J J J J

Spring J J J J J J J J J J J J J J J J J J J J J

















































5


Boxed interface relays R600 rangeOrdering details

1 n/c contact: 250 V, 10 mA - 6 A, width 12 mm Rated control supply voltage

Connection type

Particularities Type Order code Pkg qty

Weight(1 pc)kg (lb)

24 V AC/DCScrew RC circuit parallel to

output contact

RB101R-24VUC 1SNA645019R04005 0.04

(0.088)Spring RBR101R-24VUC 1SNA645519R0600

1 n/o contact: 250 V, 10 mA - 6 A, width 6 mm Rated control supply voltage

Connection type


Weight(1 pc)kg (lb)

24 V AC/DC Screw RB111-24VUC 1SNA645014R2700

10 0.02 (0.044)



24 V AC/DC Spring RBR111-24VUC 1SNA645514R2100

1 n/o contact: 250 V, 10 mA - 6 A, width 12 mm Rated control supply voltage

Connection type


Weight(1 pc)kg (lb)

24 V AC/DCScrew RC circuit parallel to

output contactRB111R-24VUC 1SNA645018R0300

5 0.04 (0.088)Spring RBR111R-24VUC 1SNA645518R0500

1 c/o (SPDT) contact: 250 V, 10 mA - 6 A, width 6 mmRated control supply voltage

Connection type


Weight(1 pc)kg (lb)

5 V DC Screw A1-A2 polarized RB121P-5VDC 1SNA645034R2300

10 0.02 (0.044)

12 V DC Screw A1-A2 polarized RB121P-12VDC 1SNA645035R2400

12 V DC Screw RB121-12VDC 1SNA645073R0000

24 V DC Screw RB121-24VDC 1SNA645071R0000


48-60 V AC/DC Screw RB121-48-60VUC 1SNA645002R0400



5 V DC Spring A1-A2 polarized RBR121P-5VDC 1SNA645534R2500

12 V DC Spring A1-A2 polarized RBR121P-12VDC 1SNA645535R2600

24 V DC Spring RBR121-24VDC 1SNA645571R0000


48-60 V AC/DC Spring RBR121-48-60VUC 1SNA645502R0600



1 c/o (SPDT) contact: 250 V, 3 mA - 6 A, gold-plated contacts, width 6 mm Rated control supply voltage

Connection type


Weight(1 pc)kg (lb)

5 V DC Screw A1-A2 polarized RB121PG-5VDC 1SNA645036R2500

10 0.02 (0.044)

12 V DC Screw RB121G-12VDC 1SNA645075R0000

24 V DC Screw RB121G-24VDC 1SNA645072R0000

24 V AC/DC Screw RB121G-24VUC 1SNA645005R0700

48-60 V AC/DC Screw RB121G-48-60VUC 1SNA645006R0000



24 V DC Spring RBR121G-24VDC 1SNA645572R0000

24 V AC/DC Spring RBR121G-24VUC 1SNA645505R0100

48-60 V AC/DC Spring RBR121G-48-60VUC 1SNA645506R0200



R600 - 6 mm

2CD

C 2

91 0

24 S

0013

R600 - 12 mm

2CD

C 2

91 0

13 S

0013

Further documentation R600 range on www.abb.com




































5


Boxed interface relays R600 rangeOrdering details

1 c/o (SPDT) contact: 250 V, 10 mA - 6 A, width 12 mm Rated control supply voltage

Connection type


Weight(1 pc)kg (lb)

60-230 V AC/DC Screw RB121-60-230VUC 1SNA645020R0100

5 0.04 (0.088)

115 V AC/DC Screw Leakage current protec-tion, RC circuit parallel to input

RB121R-115VUC 1SNA645046R0700

230 V AC/DC Screw RB121R-230VUC 1SNA645011R2400

60-230 V AC/DC Spring RBR121-60-230VUC 1SNA645520R0300

230 V AC/DC SpringLeakage current protec-tion, RC circuit parallel to input

RBR121R-230VUC 1SNA645511R2600

2 c/o (SPDT) contacts: 250 V, 1 mA - 8 A, gold-plated contacts, width 12 mm Rated control supply voltage

Connection type Type Order code Pkg qty

Weight(1 pc)kg (lb)


5 0.04 (0.088)

48-60 V AC/DC Screw RB122G-48-60VUC 1SNA645040R1500




48-60 V AC/DC Spring RBR122G-48-60VUC 1SNA645540R1700



Ordering details - Accessories Description Type Order code Pkg

qtyWeight(1 pc)kg (lb)

Jumper bar, 10 poles BJ612-10 1SNA290488R0100

10

0.05 (0.11)

Jumper bar, 20 poles BJ612-20 1SNA206754R0000 0.01 (0.022)

Separator end section SC612 1SNA290474R0200 0.05 (0.11)

Front marking blank cards, 100 pcs. RC610 1SNA233000R0100

Terminal marking blank cards, 100 pcs. RC65 1SNA232000R0000



















5


Boxed interface relays R600 rangeConnection diagrams

A1

A2S1

11S2

12

2CD

C 2

92 0

30 F

0013

A1

A2S1

14S2

13

2CD

C 2

92 0

31 F

0013

A1

A2S1

14S2

13

2CD

C 2

92 0

33 F

0013

RB(R)101R - 24VUC RB(R)111-24VUC RB111-115VUC/230VUC

A1

A2S1

14S2

13

2CD

C 2

92 0

35 F

0013

A1

A2

S111S2

12 14

2CD

C 2

92 0

36 F

0013

A1

A2

S111S2

12 14

2CD

C 2

92 0

38 F

0013

RB(R)111R-24VUC RB(R)121P(G)-5VDC/12VDC RB(R)121-12VDC/24VDC

A1

A2S1

11S2

12 14

2CD

C 2

92 0

39 F

0013

A1

A2S1

11S2

12 14

2CD

C 2

92 0

40 F

0013

A1

A2S1

11S2

12 14

2CD

C 2

92 0

42 F

0013

RB(R)121(G)-24VUC RB(R)121(G)-48-60VUC/ 115VUC/230VUC/60-230VUC

RB(R)121R-115VUC/230VUC

A1

A2S1

11 21

12 14 22 24

2CD

C 2

92 0

43 F

0013

A1

A2S1

11 21

12 14 22 24

2CD

C 2

92 0

44 F

0013

RB(R)122G-24VUC/48-60VUC RB(R)122G-115VUC/230VUC

5


Boxed interface relays R600 rangeTechnical data

RB(R)101R- RB(R)111R-

24VUC 24VUC

Input circuitRated control supply voltage Us 24 V AC/DC

Rated control supply voltage Us tolerance

DC -15 %, +20 %AC -/+ 10 %

Rated frequency 50/60 HzTypical power consumption 0.24 WTypical current 10 mADrop-out voltage at 20 °C 4.5 VIndication of operational states green LED V: control supply voltage applied

Output circuitKind of output 11-12 relay, 1 n/c contact -

13-14 - relay, 1 n/o contactRated operational voltage Ue 250 V AC

Minimum switching voltage 12 VMaximum switching voltage 250 V ACMinimum switching current 10 mARated free air thermal current Ith 6 A

Rated operational current Ie

AC-12 (resistive) 230 V 6 AAC-15 (inductive) 230 V 1.5 AAC-15 (inductive) 120 V 3 A

DC-12 (resistive) 24 V 6 ADC-13 (inductive) 24 V 1 A


AC rating (UL 508; NEMA ICS-5)

Utilization category (pilot duty)

B300

DC rating (UL 508; NEMA ICS-5)


R300

Minimum switching power 0.6 W / 0.6 VAMechanical lifetime 1 x 107 switching cyclesElectrical lifetime at AC-15 1 x 105 switching cyclesMax. fuse rating to achieve short-circuit protection 6 A fastResponse time 5 msRelease time 8 ms

RB(R)111-

24VUC 115VUC 230VUC

Input circuitRated control supply voltage Us 24 V AC/DC 115 V AC/DC 230 V AC/DC


DC -15 %, +20 % -15 %, +10 %AC -/+ 10 %

Rated frequency 50/60 HzTypical power consumption 0.24 W 0.46 W 0.8 WTypical current 10 mA 4 mA 3.5 mADrop-out voltage at 20 °C 4.5 V 17 V 27 VIndication of operational states green LED V: control supply voltage applied

Output circuitKind of output 13-14 relay, 1 n/o contactRated operational voltage Ue 250 V AC








B300



R300

Minimum switching power 0.6 W / 0.6 VAMechanical lifetime 1 x 107 switching cyclesElectrical lifetime at AC-15 1 x 105 switching cyclesMax. fuse rating to achieve short-circuit protection 6 A fastResponse time 5 ms 6 ms 7 msRelease time 8 ms 15 ms 15 ms

5



RB(R)121(P)(G)-

5VDC 12VDC 24VDC 24VUC 48-60VUC 115VUC 230VUC

Input circuitRated control supply voltage Us 5 V DC 12 V DC 24 V DC 24 V AC/DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC


DC -15 %, +20 % -15 %, +10 %AC - -/+ 10 %

Rated frequency - 50/60 HzTypical power consumption 0.2 W 0.2 W 0.24 W 0.33 W 0.54 W 0.46 W 0.8 WTypical current 40 mA 16 mA 10 mA 7 mA 9 mA 4 mA 3.5 mADrop-out voltage at 20 °C 1.2 V 2.2 V 4.5 V 8 V 8 V 17 V 27 VIndication of operational states green LED V: control supply voltage applied

Output circuitKind of output 11-12/14 relay, 1 c/o (SPDT) contactRated operational voltage Ue 250 V AC

Minimum switching voltage 12 V / gold-plated contacts: 5 VMaximum switching voltage 250 V ACMinimum switching current 10 mA / gold-plated contacts: 3 mA at 20 VRated free air thermal current Ith 6 A







B300



R300

Minimum switching power 0.6 W / 0.6 VA; gold plated contacts: 0.06 V / 0.06 VAMechanical lifetime 1 x 107 switching cyclesElectrical lifetime at AC-15 1 x 105 switching cyclesMax. fuse rating to achieve short-circuit protection 6 A fastResponse time 5 ms 5 ms 5 ms 5 ms 5 ms 6 ms 7 msRelease time 8 ms 8 ms 8 ms 8 ms 8 ms 15 ms 16 ms

RB(R)121R-

115VUC 230VUC

Input circuitRated control supply voltage Us 115 V AC/DC 230 V AC/DC


DC -20%, +15% -10%, +15%AC -/+ 10 %

Rated frequency 50/60 HzTypical power consumption 2 W 2.8 WTypical current 18 mA 12 mADrop-out voltage at 20 °C 17 V 27 VIndication of operational states green LED V: control supply voltage applied

Output circuitKind of output 11-12/14 relay, 1 c/o (SPDT) contactRated operational voltage Ue 250 V AC








B300



R300

Minimum switching power 0.6 W / 0.6 VAMechanical lifetime 1 x 107 switching cyclesElectrical lifetime at AC-15 1 x 105 switching cyclesMax. fuse rating to achieve short-circuit protection 6 A fastResponse time 6 ms 7 msRelease time 15 ms 16 ms

5



RB(R)122G

24 V UC 48-60 V UC 115 V UC 230 V UC

Input circuitRated control supply voltage Us 24 V AC/DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DC


DC -15 %, +20 % -15 %, +10 %AC -/+ 10 %

Rated frequency 50/60 HzTypical power consumption 0.48 W 0.62 W 0.96 W 0.58 W 1.15 WTypical current 20 mA 13 mA 16 mA 5 mA 5 mADrop-out at 20 °C 5.4 V 8.8 V 8.8 V V 20 V 10 VIndication of operational states green LED V: control supply voltage applied

Output circuitKind of output 11-12/14 relay, 1st c/o (SPDT) contact

21-22/24 relay, 2nd c/o (SPDT) contactRated operational voltage Ue 250 V AC

Minimum switching voltage 5 VMaximum switching voltage 250 V DC - 250 V ACMinimum switching current 1 mARated free air thermal current Ith 8 A


AC-12 (resistive) 230 V 8 AAC-15 (inductive) 230 V 1.5 ADC-12 (resistive) 24 V 8 A

DC-13 (inductive) 24 V 1 ADC-13 (inductive) 110 V 0.2 ADC-13 (inductive) 220 V 0.1 A

Minimum switching power 5 mW / 5 mVAMechanical lifetime 2 x 107 switching cyclesElectrical lifetime at AC-15 1 x 105 switching cyclesMax. fuse rating to achieve short-circuit protection 10 A fastResponse time 6 ms 10 ms 10 ms 6 ms 6 msRelease time 10 ms 14 ms 14 ms 15 ms 15 ms

General technical data - Interface relaysRB RBR

General dataMaterial of housing UL 94 V0

Mounting DIN Rail

Degree of protection housing / terminals

IP20 NEMA1

Electrical connection Screw terminal Spring-type terminal

Connecting capacity fine-strand 0.22-2.5 mm² (24-14 AWG)rigid 0.2-4 mm² (24-12 AWG) 0.2-2.5 mm² (24-14 AWG)

Stripping length 9 mm (0.354 in)Tightening torque 0.4-0.6 Nm (3.5-5.3 lb.in) n/aEnvironmental dataAmbient temperature ranges storage -40...+80 °C (-40...+176 °F)

operation -20...+70 °C (-4...+158 °F) 1)

Isolation dataRated insulation voltage U i 250 VRated impulse withstand voltage U imp

input / output 4 kVshock coil / output 4 kV

output / output 1 kVOvervoltage category IIIPollution degree 2Standards/DirectivesStandards IEC/EN 60947-5-1Low Voltage Directive 2014/35/ECRoHS Directive 2011/65/EC

1) Over 55 °C, blocks have to be mounted on horizontal rail with 10 mm spacing between each block. For vertical rail mounting use temperature is 15 °C less decreased.

5


Boxed interface relays R600 rangeLoad limit curves, Dimensional drawings

Load limit curves

resistive load

DC current [A]

DC

vo

ltag

e [V

]

20105210.2 0.50.110

20

30

4050

300

200

100

2CD

C 2

92 0

02 F

0212

DC current [A]

resistive load

20

20

304050

100

200

300

1010

510.50.20.1 2D

C v

olta

ge

[V]

2CD

C 2

92 0

28 F

0213

Versions with 1 n/o, 1 n/c or 1 c/o contact Versions with 2 c/o contacts

Dimensionsin mm and inches

70 2.76”

35 1.38”

67.5

2.66

”75

2.95

”

2CD

C 2

92 0

25 F

0013

75 2.95”

67.5

2.66

”

75 2.95

”

37.5 1.48”

2CD

C 2

92 0

26 F

0013

Versions with screw terminals Versions with spring-type terminals

5


Boxed interface relays R600 rangeNotes

5


Boxed interface optocouplers R600 rangeSelection

Ord

er n

um

ber

1SN

A645

047R

0000

1SN

A645

547R

0200

1SN

A645

021R

2600

1SN

A645

521R

2000

1SN

A645

549R

1400

1SN

A645

022R

2700

1SN

A645

522R

2100

1SN

A645

050R

1700

1SN

A645

550R

1100

1SN

A645

051R

0400

1SN

A645

025R

2200

1SN

A645

024R

2100

1SN

A645

551R

0600

1SN

A645

525R

2400

1SN

A645

524R

2300

1SN

A645

053R

0600

1SN

A645

553R

0000

1SN

A645

054R

0700

1SN

A645

058R

1300

1SN

A645

026R

2300

1SN

A645

526R

2500

1SN

A645

559R

1600

1SN

A645

027R

2400

1SN

A645

029R

0600

1SN

A645

527R

2600

1SN

A645

529R

0000

1SN

A645

062R

0700

1SN

A645

028R

0500

Typ

e

OB

IC01

00-5

-12V

DC

OB

RIC

0100

-5-1

2VD

C

OB

IC01

00-2

4VD

C

OB

RIC

0100

-24V

DC

OB

RIC

0100

-48-

60VU

C

OB

IC01

00-1

15-2

30

OB

RIC

0100

-115

-230

OB

OC

2000

-5-1

2VD

C

OB

RO

C20

00-5

-12V

DC

OB

OC

2000

-24V

DC

OB

OC

2000

-24V

UC

OB

OC

5000

-24V

DC

OB

RO

C20

00-2

4VD

C

OB

RO

C20

00-2

4VU

C

OB

RO

C50

00-2

4VD

C

OB

OC

2000

-48-

60VU

C

OB

RO

C20

00-4

8-60

VUC

OB

OC

2000

-115

VUC

OB

OC

5000

-115

VUC

OB

OC

2000

-230

VUC

OB

RO

C20

00-2

30VU

C

OB

RO

C50

00-2

30VU

C

OB

OA1

000-

24VD

C

OB

OA2

000-

24VD

C

OB

RO

A100

0-24

VDC

OB

RO

A200

0-24

VDC

OB

OA1

000-

115V

UC

OB

OA1

000-

230V

UC

Input voltage

5-12 V DC J J J J

24 V DC J J J J J J J J J J J J

48-60 V DC J J J

115-230 V DC J J

115 V DC J J J

230 V DC J J J J J J

24 V AC J J

48-60 V AC J J J

115-230 V AC J J

115 V AC J J J

230 V AC J J J J

Output rating

100 mA J J J J J J J

1 A J J J J

2 A J J J J J J J J J J J J J

5 A J J J J

Output voltage

58 V DC J J J J J J J J J J J J J J J J J J J J J J

230 V AC J J

400 V AC J J J J

Terminal type

Screw J J J J J J J J J J J J J J J

Spring J J J J J J J J J J J J J





























5


Boxed interface optocouplers R600 rangeOrdering details

Transistor output, 58 V DC, 100 mA, width 6 mm Rated control supply voltage Connection type Type Order code Pkg


5 - 12 V DC Screw OBIC0100-5-12VDC 1SNA645047R0000

10 0.02 (0.044)

24 V DC Screw OBIC0100-24VDC 1SNA645021R260048 - 60 V AC/DC Screw OBIC0100-48-60VUC 1SNA645049R1200115 - 230 V AC/DC Screw OBIC0100-115-230 1SNA645022R27005 - 12 V DC Spring OBRIC0100-5-12VDC 1SNA645547R0200

10 0.02 (0.044)

24 V DC Spring OBRIC0100-24VDC 1SNA645521R200048 - 60 V AC/DC Spring OBRIC0100-48-60VUC 1SNA645549R1400115 - 230 V AC/DC Spring OBRIC0100-115-230 1SNA645522R2100

MOS-FET output, 58 V DC, 2 A, width 6 mmRated control supply voltage Connection type Type Order code Pkg


5 - 12 V DC Screw OBOC2000-5-12VDC 1SNA645050R1700

10 0.02 (0.044)

24 V DC Screw OBOC2000-24VDC 1SNA645051R040024 V AC/DC Screw OBOC2000-24VUC 1SNA645025R220048 - 60 V AC/DC Screw OBOC2000-48-60VUC 1SNA645053R0600115 V AC/DC Screw OBOC2000-115VUC 1SNA645054R0700230 V AC/DC Screw OBOC2000-230VUC 1SNA645026R23005 - 12 V DC Spring OBROC2000-5-12VDC 1SNA645550R1100

10 0.02 (0.044)

24 V DC Spring OBROC2000-24VDC 1SNA645551R060024 V AC/DC Spring OBROC2000-24VUC 1SNA645525R240048 - 60 V AC/DC Spring OBROC2000-48-60VUC 1SNA645553R0000230 V AC/DC Spring OBROC2000-230VUC 1SNA645526R2500

MOS-FET output, 58 V DC, 5 A, width 6 mmRated control supply voltage Connection type Type Order code Pkg


24 V DC Screw OBOC5000-24VDC 1SNA645024R210010 0.02

(0.044)115 V AC/DC Screw OBOC5000-115VUC 1SNA645058R1300 24 V DC Spring OBROC5000-24VDC 1SNA645524R2300

10 0.02 (0.044)230 V AC/DC Spring OBROC5000-230VUC 1SNA645559R1600

Triac output, 400 V AC, 1 A, width 6 mmRated control supply voltage Connection type Type Order code Pkg


24 V DC Screw OBOA1000-24VDC 1SNA645027R2400 10 0.03

(0.066)115 V AC/DC Screw OBOA1000-115VUC 1SNA645062R0700230 V AC/DC Screw OBOA1000-230VUC 1SNA645028R050024 V DC Spring OBROA1000-24VDC 1SNA645527R2600 10

Triac output, 230 V AC, 2 A, width 12 mmRated control supply voltage Connection type Type Order code Pkg


24 V DC Screw OBOA2000-24VDC 1SNA645029R0600 5 0.03 (0.066)24 V DC Spring OBROA2000-24VDC 1SNA645529R0000 5

Ordering details - Accessories Description Type Order code Pkg


Jumper bar, 10 poles BJ612-10 1SNA290488R0100

10Jumper bar, 20 poles BJ612-20 1SNA206754R0000Separator end section SC612 1SNA290474R0200Front marking blank cards, 100 pcs. RC610 1SNA233000R0100Terminal marking blank cards, 100 pcs. RC65 1SNA232000R0000

R600 - 6 mm

2CD

C 2

91 0

24 S

0013

R600 - 12 mm

2CD

C 2

91 0

13 S

0013



































5


Boxed interface optocouplers R600 rangeConnection diagrams

A1

A2S1

14 (-)S2

13 (+)

2CD

C 2

92 0

19 F

0016

A1

A2S1

14 (-)S2

13 (+)

2CD

C 2

92 0

17 F

0016

A1

A2S1

14 (-)S2

13 (+)

2CD

C 2

92 0

18 F

0016

OB(R)OC, OB(R)IC except 5-12VDC versions

OB(R)IC0100-5-12VDC OB(R)OC2000-5-12VDC

OB(R)OA

5


Boxed interface optocouplers R600 rangeTechnical data

OB(R)IC0100-...

5-12 V DC 24 V DC 48-60 V UC 115-230Input circuitInput voltage 5 V DC 12 V DC 24 V DC 48 V AC/DC 60 V AC/DC 115 V AC/DC 230 V AC/DCFrequency - 50/60 HzInput current 5 mA 9 mA 4 mA 4 mA 5 mA 7 mA (AC)

16 mA (DC)11.5 mA (AC) 25 mA (DC)

Pull-in voltage 4 V 15 V 25 V 60 V AC / 70 V DC

Typ. switch-on time 10 µs 5 msTyp. switch-off time 500 µs 20 msOperating frequency 1000 Hz 20 HzPermissible leakage current 0.9 mA 1.0 mA 0.9 mA 1.6 mAOutput circuit 11(13+)- 14Kind of output TransistorRated operational voltage 4.5-58 V DCMinimum switching current 1 mAMaximum switching current 100 mALeakage current at max. switching voltage < 50 µARated operational current Ie (IEC/EN 60947-5-1)

DC-12 (resistive) 58 V 0.1 A

Residual voltage typical 1 Vmaximum 1.3 V

Max. fuse rating to achieve short-circuit protection 100 mA fast

Isolation dataRated insulation voltage U i 250 VRated impulse withstand voltage U imp 2.5 kVOvervoltage category IIPollution degree 2

OB(R)OC2000-...

5-12 V DC 24 V DC 24 V UC 48-60 V UC 115 V UC 230 V UCInput circuitInput voltage 5 V DC 12 V DC 24 V DC 24 V AC/DC 48 V AC/

DC60 V AC/DC

115 V AC/DC

230 V AC/DC

Frequency - 50/60 HzInput current 5 mA 9 mA 5.4 mA 6.3 mA 4 mA 5.1 mA 4.2 mA 4 mAPull-in voltage 4 V 12 V 15 V 27 V 50 V 80 VTyp. switch-on time 15 µs 30 µs 1 ms 5 ms 500 µs 1 msTyp. switch-off time 250 µs 400 µs 7 ms 20 ms 10 ms 15 msOperating frequency 2000 Hz 1000 Hz 60 Hz 20 Hz 50 Hz 35 HzPermissible leakage current 1 mA 0.8 mA 0.9mA 1 mA 0.3 mAOutput circuit 11(13+)- 14Kind of output MOS-FETRated operational voltage 4.5-58 V DCMinimum switching current 1 mAMaximum switching current 2 ALeakage current at max. switching voltage < 50 µARated operational current Ie

DC-12 (resistive) 58 V 2 A

Residual voltage typical 0.1 Vmaximum 0.5 V

Max. fuse rating to achieve short-circuit protection 2 A ultra-fastIsolation dataRated insulation voltage U i 250 VRated impulse withstand voltage U imp 2.5 kV

Overvoltage category IIPollution degree 2

5


Boxed interface optocouplers R600 rangeTechnical data

OB(R)OC5000-...

24VDC 115VUC 230VUCInput circuitInput voltage 24 V DC 115 V AC/DC 230 V AC/DCFrequency - 50/60 HzInput current 5.4 mA 4.2 mA 4 mAPull-in voltage 12 V 50 V 80 VTyp. switch-on time 30 µs 500 µs 1 msTyp. switch-off time 400 µs 10 ms 15 msOperating frequency 1000 Hz 50 Hz 35 HzPermissible leakage current 0.8 mA 0.3 mA 0.3 mAOutput circuit 11(13+)- 14Kind of output MOS-FETRated operational voltage 4.5-58 V DCMinimum switching current 1 mAMaximum switching current 5 ALeakage current at max. switching voltage < 50 µARated operational current Ie

DC-12 (resistive) 58 V 5 A

Residual voltage typical 0.1 Vmaximum 0.5 V

Max. fuse rating to achieve short-circuit protection 6 A ultra-fastIsolation dataRated insulation voltage U i 250 VRated impulse withstand voltage U imp 2.5 kVOvervoltage category IIPollution degree 2

OB(R)OA1000-... OB(R)OA2000-...

24VDC 115VUC 230VUC 24VDCInput circuitInput voltage 24 V DC 115 V AC/DC 230 V AC/DC 24 V DCFrequency - 50/60 Hz -Input current 3.6 mA 4.15 mA 4.6 mA 3.6 mAPull-in voltage 14 V 60 V 135 V 14 VTyp. switch-on time 150 µs 2.2 ms 2.5 ms 150 µsTyp. switch-off time 1 ms 18 ms 25 ms 1 msOperating frequency 500 Hz 25 Hz 20 Hz 500 HzPermissible leakage current 1 mA 1 mAOutput circuit 11(13+)- 14Kind of output Triac TriacRated operational voltage 24-400 V AC 10-230 V ACMinimum switching current 25 mA 25 mAMaximum switching current 1 A 2 ALeakage current at max. switching voltage < 500 µA < 500 µARated operational current Ie

AC-12 (resistive) 400 V 1 A -AC-12 (resistive) 230 V - 2A

Residual voltage typical 1 V 1 Vmaximum 1.6 V 1.6 V

Max. fuse rating to achieve short-circuit protection 4 A ultra-fast 4 A ultra-fastIsolation dataRated insulation voltage U i 400 V 230 VRated impulse withstand voltage U imp 4 kV 4 kVOvervoltage category II IIPollution degree 2 2

5


Boxed interface optocouplers R600 rangeTechnical data, Dimensions

General technical data - OptocouplersOB OBR

General dataMaterial of housing UL 94 V0

Mounting DIN Rail

Degree of protection housing / terminals

IP20 NEMA1

Electrical connection Screw terminal Spring-type terminal

Connecting capacity fine-strand 0.22-2.5 mm² (24-14 AWG)rigid 0.2-4 mm² (24-12 AWG) 0.2-2.5 mm² (24-14 AWG)

Stripping length 9 mm (0.354 in)Tightening torque 0.4-0.6 Nm (3.5-5.3 lb.in) n/aEnvironmental dataAmbient temperature ranges storage -40...+80 °C (-40...+176 °F)

operation -20...+70 °C (-4...+158 °F)Standards/DirectivesStandards IEC/EN 60947-5-1Low Voltage Directive 2014/35/EURoHS Directive 2011/65/EU

Dimensionsin mm and inches

70 2.76”

35 1.38”

67.5

2.66

”75

2.95

”

2CD

C 2

92 0

25 F

0013

75 2.95”

67.5

2.66

”

75 2.95

”

37.5 1.48”

2CD

C 2

92 0

26 F

0013

Versions with screw terminals Versions with spring-type terminals

Interface relays and optocouplers Product group picture...2017/08/22 · 5 5/3 ABB | Catalog...

Documents

Transcript of Interface relays and optocouplers Product group picture...2017/08/22 · 5 5/3 ABB | Catalog...