INTERFACE E - 5/8 Up to 36 kV - CABLE CLEATS, CABLE JOINTS ... · connectors with a type E - 5/8"...
Transcript of INTERFACE E - 5/8 Up to 36 kV - CABLE CLEATS, CABLE JOINTS ... · connectors with a type E - 5/8"...
7
ACCESSORIESINTERFACE E - 5/8"
Up to 36 kVApplicationFor use with connectors andbushings with an INTERFACEE - 5/8" as described in ANSI/IEEE std. 386.
6/10 (12) kV6.35/11 (12) kV8.7/15 (17.5) kV
12/20 (24) kV12.7/22 (24) kV
18/30 (36) kV
Technical characteristicsAll these products, except theearthing plug, are tested forAC withstand and partialdischarge prior to leavingthe factory.
Ordering instructionsOrder750DP for 800 A or775DP for 1250 Aapplications.
750DP & 775DPDead-end plugActs as a tightening nut forthe 750LR and 775LR teeconnector kits.The plug contains a voltagedetection point.The threaded stud andconductive rubber protectingcap is included.
750CP & 775CPConnecting plugFor connecting two or moreconnectors with a type E - 5/8"interface together, thus creatinga separable cable joint or amultiple cable connection toequipment.
Ordering instructionsOrder750CP for 800 A or775CP for 1250 Aapplications.
750BIP & 775BIPBasic insulating plugActs as a tightening nut forthe 750LR and 775LR teeconnector kits.The plug contains a voltagedetection point.The conductive rubberprotecting cap is included.The 750BIP and 775BIP aresupplied without threaded stud.
Ordering instructionsOrder750BIP for 800 A or775BIP for 1250 Aapplications.
8
Kit MTEarthing kit for coppertape screened cablesContains a tinned copper braid(25 mm² - L = 500 mm), atinned copper wire for cleatingand water sealing mastic.
Ordering instructionsOrderKit MT for 800 A and 1250 Aapplications.
Ordering instructionsOrder750GP for 800 A and 1250 Aapplications.
750SOPStand-off plugIs designed to support and'dead-end' connectors with atype E - 5/8" interface whenremoved from equipment.
Ordering instructionsOrder750SOP for 800 A and 1250 Aapplications.
750BE & 775BEBushing extenderProvides an extension pieceto allow cables to stand awayfrom equipment.Is used in conjunction with theconnecting plug (750CP or775CP).
Ordering instructionsOrder750BE for 800 A or775BE for 1250 Aapplications.
750GPEarthing plugIs designed to support andearth connectors with a type E -5/8" interface when removedfrom equipment.