Integration ERTMSFormalSpecs, EATS and DMI application: status 27 June 2014
-
Upload
ertms-solutions -
Category
Technology
-
view
234 -
download
2
description
Transcript of Integration ERTMSFormalSpecs, EATS and DMI application: status 27 June 2014
04/13/2023 PRESENTATION TITLE 1
Integration ERTMSFormalSpecs,EATS and DMI test application: status on 27 June 2014
04/13/2023 PRESENTATION TITLE 2
Tracks Announcements Display (I)
● Here it is possible to see the announcements corresponding to Track Conditions excluding sound horn, non stopping areas, tunnel stopping areas and big metal masses in Subset 026
04/13/2023 PRESENTATION TITLE 3
Track Announcements Display (II)
● Here it is possible to see the announcements corresponding to Track Conditions sound horn, non stopping areas and tunnel stopping areas in Subset 026
04/13/2023 PRESENTATION TITLE 4
Integration ERTMSFormalSpecs-DMITest application-EATS: Start of Mission
● The procedure of Start of Mission is performed by the DMI test application and EATS
● The Train Data are set by EATS but the rest of the procedure is performed by the DMI test application
04/13/2023 PRESENTATION TITLE 5
Start of Mission: Driver ID
● Driver ID is set by using the DMI test application
04/13/2023 PRESENTATION TITLE 6
Start of Mission: Train Running Number
● Train Running Number information is set using the DMI test application
04/13/2023 PRESENTATION TITLE 7
Start of Mission: Level
● Start Level information is set using the DMI test application
04/13/2023 PRESENTATION TITLE 8
Start of Mission: Start
● Once all the information has been set up, the driver presses the Start Key and the mission starts after the acknowledgement of the proposed mode
04/13/2023 PRESENTATION TITLE 9
Start of Mission: Acknowledgement of proposed mode
● Acknowledgement of the proposed Mode. In this case is in “Staff Responsible” (SR).
04/13/2023 PRESENTATION TITLE 10
Integration ERTMSFormalSpecs-DMI test application-EATS : Run in different Modes
● Once the mission has started, the DMI test application shows the information that must be displayed
04/13/2023 PRESENTATION TITLE 11
EATS and ERTMSFormalSpecs in Mode SR and DMI test app. displaying the inforamtion (I)
04/13/2023 PRESENTATION TITLE 12
EATS and ERTMSFormalSpecs in Mode SR and DMI test application displaying the information (II)
● • Displayed information: ● – Current Level => Level 1● – Current Mode => Staff Responsible● – Permitted Speed => 40 Km/h● • All this information comes from● ERTMSFormalSpecs and is displayed by the DMI ● test application.
04/13/2023 PRESENTATION TITLE 13
EATS and ERTMSFormalSpecs in Mode FS (Full supervision) and DMI test application displaying the information (I)
04/13/2023 PRESENTATION TITLE 14
EATS and ERTMSFormalSpecs in Mode FS and DMI test application displaying the information (II)
● After receiving the first Balise Group, several ● parameters have changed.● Displayed information: ● Current Level => Level 1● Current Mode => Full Supervision● Permitted Speed => 60 Km/h● All this information comes from ERTMSFormalSpecs● and is displayed by the DMI test application.
04/13/2023 PRESENTATION TITLE 15
Thank you for your attention!
www.ertmssolutions.com