E SSENTIAL S TANDARD 4.00 Understand the role of finance in business.
insulroof - Bondor Insulated Panels Standard Drawing... · insulroof ® 4 InsulRoof® Construction...
Transcript of insulroof - Bondor Insulated Panels Standard Drawing... · insulroof ® 4 InsulRoof® Construction...
insulroof®
Leaders in Thermal & Architectural Building Solutions
Technical Drawings v1 - Current 21/05/2018
insulroof®
2 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Contents
Panel Details - INR13-PD01-0 ............................................................. 3
Barge Capping Detail - INR13-BC01-0 ................................................ 4
Barge / Parapet Detail - INR13-BC02-0 ............................................... 5
Head Flashing Detail - INR13-HF01-0 ................................................. 6
Ridge Detail - INR13-RD03-0 .............................................................. 7
Insulate Box Gutter Detail - INR13-RD05-0 ......................................... 8
Roof Expansion Joint - INR13-RJ01-0 ................................................. 9
Insulated Valley Boxed Gutter - INR13-RV01-0 .................................. 10
Eaves Gutter Detail 1 - INR13-WC03-0 ............................................. 11
Eaves Gutter Detail 2 - INR13-WC04-0 ............................................. 12
3
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Panel Details - INR13-PD01-0
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSPD01
PANEL DETAIL
0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
insulroof®
4 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
Barge Capping Detail - INR13-BC01-0
Industrial Roofing & Cladding
ANGLE BRACKETTO FIX WALL PANEL
COLORBOND CAPPINGFIXED TO WALL PANEL
INSULROOF
CLEAT &STRUCTURALSTEEL
PURLINS
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERYTHIRD CREST. ADDITIONALFIXINGS MAY BE REQUIRED,REFER ENGINEER FORASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSBC01
BARGE CAPPING DETAIL
IND.ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
5
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Barge / Parapet Detail - INR13-BC02-0
Industrial Roofing & Cladding
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER
FOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSBC02
BARGE / PARAPET DETAIL
IND.ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
insulroof®
6 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
Head Flashing Detail - INR13-HF01-0
Industrial Roofing & Cladding
PROFILED FILLERSEALED TOP AND
BOTTOM IF REQUIRED
TURN UP ROOF PANSTO FULL CREST HEIGHT
(SPECIAL TOOLAVAILABLE)
FOAM SEAL IFREQUIRED
ROOF HEAD FLASHING
PROFILED FILLERSEALED TOP AND
BOTTOM IF REQUIRED
5° MINIMUM PITCH.
4mm ALUMINIUM RIVETS@300CRS (TYP)
4mm ALUMINIUM RIVETS@300CRS (TYP)
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEERFOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTS
HF01
HEAD FLASHING DETAIL
IND.ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
7
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Ridge Detail - INR13-RD03-0
Industrial Roofing & Cladding
COLORBOND RIDGECAPPING
ROOF SUPPORTSTRUCTURE.
INSULROOF
CYCLONE WASHER (OPTION FORCYCLONIC REGIONS)
COLORBONDCOVERFLASHING
MINERAL WOOLOR FIBRE INFILL
5° MINIMUM PITCH.
14g TEK SCREWS TO EVERYTHIRD CREST. ADDITIONAL
FIXINGS MAY BE REQUIRED,REFER ENGINEER FOR
ASSESSMENT.
TURN UP PANS TO FULLCREST HEIGHT (SPECIAL
TOOL AVAILABLE)
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTS
RD03
RIDGE DETAIL
IND.ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
insulroof®
8 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
Insulate Box Gutter Detail - INR13-RD05-0
Industrial Roofing & Cladding
BOX GUTTER(INDEPENDENTLYSUPPORTED)
OVERFLOW SPITTERS/ SPIGOT
6x4mm BUTYLRUBBER
COLORBOND "Z"FLASHING
INSULROOF PANEL "CUT BACKS"CARRIED OUT ON SITE.
50mm INSULATEDPANEL
CONCRETE PARAPETWALL
PARAPET AND COVERFLASHINGS
ROOF SUPPORTSTRUCTURE
5° MINIMUM PITCH.
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER
FOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTS
RD05
INSULATED BOX GUTTER DETAIL
IND.ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
9
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Roof Expansion Joint - INR13-RJ01-0
Commercial / Domestic Roofing
INSULROOFTURN UP PAN TO FULLCREST HEIGHT (SPECIALTOOL AVAILABLE)
TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)
COLORBONDFLASHING
ROOF SUPPORTSTRUCTURE
MINERAL WOOL INFILL(IF REQUIRED) COLORBOND TRIM
FLASHING (IF REQUIRED)
4mm ALUMINIUM RIVETS@300CRS (TYP)
5° MINIMUM PITCH.
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER
FOR ASSESSMENT.
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEERFOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSRJ01
ROOF EXPANSION JOINT
COMMERCIAL / DOMESTIC ROOFING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
insulroof®
10 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
Insulated Valley Boxed Gutter - INR13-RV01-0
Commercial / Domestic Roofing
BOX GUTTER DIMENSIONS AS REQUIRED
BOX GUTTER SUPPORT
TURN DOWN PANAPPROX 20° (SPECIALTOOL AVAILABLE)
ROOF SUPPORTSTRUCTURE
SILICONE SEALANTEACH SIDE
14g TEK SCREWS TO EVERY THIRD CREST.ADDITIONAL FIXINGS MAY BE REQUIRED,
REFER ENGINEER FOR ASSESSMENT.5° MINIMUM PITCH.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSRV01
INSULATED VALLEY BOXED GUTTER
COMMERCIAL / DOMESTIC ROOFING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
11
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
Eaves Gutter Detail 1 - INR13-WC03-0
Industrial Roofing & Cladding
"Z" FLASHING TO SEALCORE IF REQUIRED.
FASTEN GUTTER BRACKETTHROUGH PANEL WITH BOLT
WASHER AND NUT ASSEMBLY
EAVES GUTTER
ROOF PANEL CUT BACKS CARRIED OUT ON SITE.
ROOF SUPPORTSTRUCTURE
4mmALUMINIUMRIVETS@300CRS(TYP)
5° MINIMUM PITCH. INSULROOF
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER
FOR ASSESSMENT.
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTSWC03
EAVES GUTTER DETAIL 1
IND. ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
insulroof®
12 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
Eaves Gutter Detail 2 - INR13-WC04-0
Industrial Roofing & Cladding
"Z" FLASHING TO SEALCORE IF REQUIRED
EAVES GUTTER
ROOF PANEL CUT BACKS CARRIED OUT ON SITE.
ROOF SUPPORTSTRUCTURE4mm ALUMINIUM
RIVETS @300CRS (TYP)
5° MINIMUM PITCH. INSULROOF
14g TEK SCREWS TO EVERY THIRDCREST. ADDITIONAL FIXINGS MAYBE REQUIRED, REFER ENGINEER
FOR ASSESSMENT.
TURN PAN DOWNAPPROX 20° (SPECIAL
TOOL AVAILABLE)
OUTRIGGER FASCIA DETAIL
FASCIA PURLIN
WALL CLADDING
This drawing is copyright and the property of Metecno PtyLimited trading as Bondor. It is subject to their recall andmay not be reproduced or its contents divulged withoutwritten authority.
INR13 -
Description
Title
11.04.2018
Drawing no. Issue
Description InitRevDate
Metecno Pty Limited trading as Bondorwww.bondor.com.au 1300 300 099
ABN 44 096 402 934
Scale @A4
DateApplication
INSULROOF - ROOFING
NTS
WC04
EAVES GUTTER DETAIL 2
IND. ROOFING & CLADDING 0
NOTE:PANEL BY BONDOR, SCREW MAY BE BYBONDOR, ALL OTHER ITEMS BY OTHERS.
13
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
insulroof®
14 InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Construction
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
insulroof®
15
Note: • We recommend that you should engage your local Bondor® architectural specialist at design stage to ensure the panel system is designed to suit specific project requirements.• All exposed core material is to be encapsulated with a non-combustible covering in order to achieve a BAL-40 or less.• Panel by Bondor®, screw may be by Bondor®, all other items by others.• Additional construction details are available through the Bondor® Website Client Portal or by contacting a local Bondor® representative. www.bondor.com.au• This drawing is copyright and the property of Metecno Pty Limited trading as Bondor®. It is subject to their legal recall and may not be reproduced or it’s contents divulged without written authority.
InsulRoof® Construction - Technical Drawings v1 - Current 21/05/2018
Standard Constructioninsulroof®
www.bondor.com.au
1300 300 099
BRISBANE/EXPORT 103 Ingram Road Acacia Ridge QLD 4110 Ph: (07) 3323 8500 Fax: (07) 3323 8501
PERTH 17 Gauge Circuit Canning Vale WA 6155 Ph: (08) 9256 0600 Fax: (08) 9256 0620
ADELAIDE 70-72 Rundle Road Salisbury South SA 5106
Ph: (08) 8282 5000 Fax: (08) 8282 5099
MELBOURNE 329A St Albans Road Sunshine VIC 3020 Ph: (03) 8326 8000 Fax: (03) 8326 8099
LAUNCESTON 7 Connector Park Drive Kings Meadows TAS 7249
Ph: (03) 6335 8500 Fax: (03) 6335 8544
SYDNEY 49-53 Newton Road Wetherill Park NSW 2164
Ph: (02) 9609 0888 Fax: (02) 9729 1114
Leaders in Thermal & Architectural Building Solutions
Metecno Pty Limited. ABN 44 096 402 934. The manufacturer reserves the right to change the specification without notice. Bondor®, Equitilt®, BondorPane®, FlameGuard®, MetecnoPanel®, EconoClad®, MetecnoKasset®, InsulWall®, LuxeWall®, DesignerWall®, SolarSpan®, InsulRoof®, MetecnoSpan®, Purline®, Equideck®, InsulLiving®, Metecno are trademarks of Metecno Pty Limited. BlueScope, Colorbond®, Permagard® and colour names are trademarks of BlueScope Steel Limited. Microban® is a registered trade mark of the Microban Products Company. The colours shown in this publication have been reproduced to represent actual product colours as accurately as possible. However, given printing limitations, we recommend checking your chosen colour against an actual sample before placing orders. This advice is of a general nature only. Designers must provide for adequate structural performance and other Building Code requirements. This information is subject to change. Refer to Bondor® website for latest version. Consult Bondor® for your application.
BON0535 Drawing Pack - InsulRoof v1 21/05/2018