Instrument Product Guide 2011

S.T. Control Co., Ltd.Your Par tner in Fac tory Solut ions

Sensepoint XCD Transmitter with Sensor

Flammable, toxic and oxygen gas detectors 3 wire (sink/source) 4-20 mA output + relays Modbus RS-485 / RTU Replaces Sensepoint Pro and other 3 wire 4-20 mANon Intrusive 1 man operation Magnetic switchesPlug in Catalytic, IR and ECC sensorsCommon transmitter platform Simplified and reduced cost of installation Reduced training time and cost Less chance of incorrectly configuring/interpreting/readings/messages Reduced maintenance spares stock and costTri-colour backlit LCD for status indicationHazardous area certified UL, CSA, cUL, Inmetro and ATEX Flameproof transmitter (LM25 or 316 SS)

Sensepoint XCD RFD (Remote Flammable Detector)

Sensepoint XCD RFD (Remote Flammable Detector) has beenspecifically designed for use with remotely mounted flammable gassensors. This configuration is ideal for applications where the sensor isrequired to be mounted remotely from the transmitter in areas wheretemperatures are well above ambient (up to 150°C/302°F), or that aredifficult to access. The transmitter can be mounted at a suitable locationaway from this area where it is easy to access, view its display andinteract with via the user interface.

Sensepoint XCD RFD is suitable for use with several HoneywellAnalytics’ sensors; the Sensepoint XCD catalytic bead and infrared typeplug-in sensors and the Sensepoint standard and high temperaturesensors. These sensors can be mounted up to 30 metres (100 feet)away from the transmitter thereby accommodating even the mostremote and inaccessible applications. The gas range is user adjustableat the transmitter from 0-100%LEL down to 0-20%LEL.

Sensepoint XCD RTD (Remote Toxic Detector)

Sensepoint XCD RTD (Remote Toxic Detector) has been specificallydesigned for use with the Honeywell Analytics' range of Sensepoint toxicand Oxygen sensors. This configuration is ideal for a wide range of toxicand Oxygen gas detection applications. The sensor can be mounted upto 30 metres (100 feet) away from the transmitter in areas that aredifficult to access. The transmitter can be mounted at a suitable locationaway from this area where it is easy to access, view its display andinteract with via the user interface.

where it is easy to access, view its display and interact with via the userinterface.

Sensepoint toxic and Oxygen sensors offer a wide variety of gases andmeasuring ranges. The sensor can be mounted directly to thetransmitter as well as remotely. Sensepoint XCD RTD can be used as acommon platform for all toxic and Oxygen gas detection, reducingspares requirements. The Sensepoint sensor design includes an ISportion with a removable sensor cartridge, eliminating the need for a hotwork permit when changing the sensor cartridge. The sensor has anIP67 rating for use in the harshest conditions.

www.stcontrol.com


www.stcontrol.com

XNX Universal Transmitter

A universal transmitter compatible with all Honeywell Analytics gassensor technologies.

Universal transmitter platform Use with all HA sensing technologies Catalytic Bead, Electrochemical & Infrared Compatible with entire installed base Sensepoint (inc. HT & ppm), Optima Plus and Excel Common IS sensor with Series 3000

Flexible configuration Modular design for ‘future proofing’ 3 or 4 wire sink, source or isolated 4-20 mA HART® output as standard Options include Relays, local HART® port, Foundation Fieldbus™ or Modbus® outputs

Meets latest standards IECEX + ATEX Performance EN61779/EN50402

Serviceable conventional technology MPD IR Slug/Catalytic Bead S3K IS Sensor for ECC

Series 3000 MkII Transmitter with Sensor

Gas detector 2 wire 4-20 mA Output Replaces Sieger Series 2,000 (non IS) and other 2 wire 4-20 mA toxic gas detectors

Pre calibrated sensors for : O , H S, CO, SO , NH , HCL, HCN*, HF, CL, CLO, O *, NO, H, PH , NO SurecellTM sensors ReflexTM sensor diagnostics

Hazardous area certified UL, CSA, cUL, INMETRO and ATEX IS sensor connection giving ‘Hot Swap’ capability

Markets Petrochemical, chemical, manufacturing, industrial and utilities

* Check with HA for availability

2 2 2 23 3


www.stcontrol.com

Apex Transmitter with Sensor

Highest performance fixed flammable and toxic gas detector with a choiceof communication outputs, accessories and installation flexibility.

Apex takes the best elements of gas detection design and combines them intoone unit. It provides the highest performance, installation flexibility, a wide rangeof accessories and a choice of communication outputs. All this is provided in apackage that is easy to install, operate and maintain.

Searchpoint Optima Plus Point Infrared Gas Detector

Market leading point infrared flammable gas detector offering unrivalledperformance and sensitivity• Increased false alarm rejection with 42 SOFTWARE™• Increased uptime with contaminated optics warning• Dynamic Heating Control ensures condensation free optics• No undetected failures• Improved diagnostics• Integral event logging• Reduced power consumption• Certified to many hazardous area classification schemes including : European(ATEX), UL, CSA and more

Searchline Excel Open Path Infrared Gas Detector

Searchline Excel is totally immune to interference from sunlight or anyother sources of radiation such as flare stacks, arc welding or lightning.

Searchline Excel employs a patented double band pass filter that fullycompensates for all types of fog and/or rain, thereby allowing it tocontinue to operate accurately and reliably in all climatic conditions.

• Searchline Excel is a hazardous area certified flammable infrared open pathgas detector• Searchline Excel comprises of a Transmitter and Receiver that are mountedat each end of the path to be monitored• Three versions are available : Short Range (5-40 m), Medium Range(40-120 m) and Long Range (120-200 m)• Receiver output is 3 wire 4-20 mA selectable sink or source• Standard calibration is Methane


www.stcontrol.com

Signalpoint Pro Toxic Gas Detector

The Signalpoint Pro range of toxic and Oxygen gas detectors with integraldisplay offers a low cost solution to outdoor gas monitoring

Intrinsically Safe gas detector -2 wire 4-20 mA Output• Replaces Sieger Series 2000 (IS) and other 2 wire 4-20 mA toxic gasdetectorsSmart sensors for :• O , H S, CO, SO , NH• NO and HHazardous area certified• ATEX, UL, CSA (cUL) (Not IECEx)• Intrinsically Safe (IS) design• ‘Hot Swap’ sensor cartridge exchange capabilityMarkets• Industrial, Light Industrial, Manufacturing, Utilities, Pharmaceutical, Chemicaland Petrochemical

Signalpoint Flammable and Toxic Gas Detector

The Signalpoint range of flammable, toxic and Oxygen gas detectors offers a lowcost solution to indoor gas monitoring. Supplied with an integral pre-wiredjunction

Ingress protection IP54 • Indoor use onlyIntegral junction box• Non threaded cable entry• No need for ceiling bracketCombustible (0-100% LEL)• ATEX II 2G EEx ed IIC T4 -30 to +40°C• Performance to EN50054• Disposable sensor (typical 5 year life)Toxic (H S, CO, Cl , NH ) and Oxygen (O )• Non certified (performance to EN45544 for H S)• Integral status/alarm LED• Replaceable sensor (typical 2 year life)

Sensepoint Flammable and Toxic Gas Detector

ATEX certified flammable, toxic and Oxygen gas detectors offering a low costsolution to hazardous area monitoring

• SurecellTM electrochemical sensors• Poison resistant catalytic bead• Fast and reliable• Typical 2 to 5 years operational life• Complies with the latest standards• Hazardous area approval and performance• IP65/67 for use in harsh environments

Sensepoint HT Sensor

The Sensepoint high temperature sensor has been specifically designed for thedetection of combustible gases in high temperature hazardous area locations.Typical applications include turbine enclosures and drying ovens used in solventbased printing and coating machines.

• Certified for hazardous area operation up to +150°C (+302°F)• Alarm trip points as low as 5% LEL• Fast speed of response• Poison resistant detectors• Low power consumption

2

2 2

2 2 3

2 2

2

23


www.stcontrol.com

System 57 Controller

System 57 accepts inputs from flammable and toxic gas detectors, a large rangeof flame, smoke and heat detectors and manual call points. Available outputsinclude relays, analogue signals and industry standard digital protocols.Packaged in either wall mounting cabinets or panel mounting racks, System 57can be used stand alone or integrated into the heart of a fire and gas system.• High precision, intelligent control• Master/voted alarm options• High packing density• Flexible I/O configuration• Relay output options

Touchpoint 1 Controller

The Touchpoint 1 Controller when used with any one of the Sensepoint range ofgas detectors provides 24 hour protection from flammable, toxic or Oxygen gashazards. With executive outputs to shutdown process equipment or drive warningdevices, the Touchpoint 1 is ideal for continuous monitoring of small remote siteswhere it is inappropriate or costly to monitor the area from a central location.

AC and/or DC driven, the Touchpoint 1 includes built-in audiovisual alarms, twoprogrammable alarm relays and a system fault relay as well as an isolated 4-20mA output proportional to the input from the field device. The system is fully userprogrammable via the ultra-clear backlit LCD and intuitive menu system. Forexample, relays may be configured as ‘non-atching’ (default is ‘latching’) so thatoutputs clear automatically on remote unmanned sites. Buttons used forconfiguration are hidden behind an access panel to prevent tampering. A singlebutton is available to all users on the front of the controller to perform a simpleself-test or to reset alarms if needed.

Touchpoint 4 Controller

The Touchpoint 4 controller provides protection of personnel and plant fromflammable, toxic and Oxygen gas hazards when used with up to four Sensepointgas detectors. Self-contained, fully user configurable and wall mounted, aTouchpoint 4 gas detection system can monitor gas hazards in a large area orseveral discrete locations from a convenient central site.

Input modules are available for use with 4-20 mA and mV type gas detectors.Each channel includes a backlit display detailing gas type, measuring range,actual gas reading in both numeric and bar graph format as well as alarm status.Two user programmable alarm relays and a repeated 4 -20 mA signalproportional to the gas level monitored are included per channel.

Unipoint Controller

Two versions of Unipoint are available; one for mV bridge, catalytic bead type,flammable gas detector and the other for any 2 or 3 wire 4-20 mA type gasdetector. Each Unipoint is easily installed onto the DIN rail via a special socket(provided) that also interconnects power to adjacent units. With removableterminal connectors, individual Unipoint controllers can be easily changed withoutdisturbing other devices.

• Ultra-clear backlit display• System status codes• Built-in audiovisual alarms• Intuitive menu system• Simple pushbutton operation• Remote accept, reset and inhibit inputs


www.stcontrol.com

UPS IISmart Loop Calibrator for Milliamps

• Sources and reads milliamps • Powers and reads 2-wire transmitters • Reads and simulates DP transmitters in % of flow • Auto-ramp cycling for endurance tests• Auto-stepping for hands-free calibration• Fixed calibration currents• Fixed currents for valve stroking

UPS IIILoop Calibrator

• Measure or Source 0 to 24 mA • Accuracy ±0.01% of reading • Dual mA and % readout, linear or flow • Step, Span Check, Valve Check and Ramp • 6 VDC measurement and continuity • HART® compatible

UPS III ISIntrinsically Safe Loop Calibrator

• Adjustable resolution & display contras• Uses industry standard AA batteries• Battery voltage and battery low indicator• Information screen reports serial number, software version and calibrationdate• Primary reading in mA or %• Auto power off (enable or disable)• Pin protected, closed case calibration• Leather case with carry strap (Note : the UPS III IS must m be used in the case for hazardous area use)

IDT 600Dirt Moisture Trap • IDT 600-1 : 1/8 dirt moisture trap with BSP connections• IDT 600-2 : 1/8 dirt moisture trap with NPT connections • The system should not be pressurized above 500 psig (35 bar)• Gases compatible with stainless steel, acrylic and nitrile o-ring seals


www.stcontrol.com

PV 210Low Pressure Pneumatic Hand Pump

• Dual source of pneumatic pressure and vacuum• Generate vacuum to 90%• Generate pressure to 3,000 mbar• Adjustable pressure relief valve for setting maximum output pressure• Integral fine control and pressure release valve• Lightweight, handheld and easy to use

PV 211Pneumatic Pressure and Vacuum Pump • Dual source of pneumatic pressure and vacuum• Pneumatic pressure in excess 600 psi (40 bar) • Generates vacuum to 28.5 inHg • Adjustable stroke Built-in fine adjust Vernier • Needle valve for controlled pressure release

PV 212Hydraulic Hand Pump

• Hydraulic pressure up to 1,000 bar• Compatible with many different liquids• Large transparent 100 cc capacity reservoir• Quick priming and pressure generation using scissor action pump• Controlled pressure release and adjustment• High pressure/priming selector

PV 411Four-in-One Hand Pump

• Multi-function “4 In 1” handpump • Pneumatic pressures to 600 psi (40 bar) • Hydraulic pressures to 10,000 psi (700 bar) • Generates vacuum to -28.5 inHg • Vacuum priming for hydraulic systems • Excellent low pressure control • Adjustable overpressure protection


www.stcontrol.com

DPI 104Digital Test Gauge

• ±0.05% full scale (FS) accuracy• Pressure ranges to 20,000 psi (1,400 bar)• Eleven selectable pressure units• Large, easy-to-read display with five-digit resolution• % pressure indication and additional bar graph for quick visual reference• Temperature compensated accuracy from 14°F to 122°F (-10°C to 50°C)0 to 5 V analog output• Pressure switch test• Minimum/maximum, tare and alarm functions• IDOS compatible and RS232 serial interface• Networking capability (1 to 99 units)• Stainless steel or Inconel pressure cavity for aggressive media

DPI 705Handheld Pressure Indicators

• Ranges 0 to 1 psi through to 10,000 psi (0 to 70 mbar through to 700 bar)• ± 0.1% full scale (FS) accuracy• Rugged, lightweight handheld design• Leak test, tare, max/min and filter• Intrinsically safe version• Standard ranges available from stock• Optional pneumatic and hydraulic hand pumps

DPI 740Portable Precision Barometer

• Accuracy : ± 0.004 inHg (± 0.15 mbar) absolute• Ranges to 103 inHg (3.5 bar) absolute• Six digit resolution LCD display• Multiple pressure scales and aeronautical units• Alkaline or rechargeable batteries• Lightweight hand-held rugged design• RS232 output

DPI 800/802Pressure Indicator/Loop Calibrator

• Range from 10 inH O to 10,000 psi (25 mbar to 700 bar)• Single or dual range configuration• IDOS pressure sensors provide accuracies to ±0.05% FS all-inclusive or ±0.01% precision• mA measuring switch test and 24 V loop power• Large backlit display, menu driven interface• HART loop resistor• Robust and weatherproof• Compact simple to use, easy to carry• Convenient, one-handed operation• Secure grip, impact resistant and elastomeric protected

2


www.stcontrol.com

DPI 811/812RTD Calibrator/Loop Calibrator

• Measure and simulate RTDs• Automatic detection of two-, three- and four-wire RTDs highlights faulty probe• mA measure, switch test and 24 V loop power• Large backlit display, menu driven interface• HART loop resistor• Secure grip, impact resistant, elastomer protected• Plug and play connector for intelligent Digital Output Sensor (IDOS) UniversalMeasurement Modules

DPI 821/822Thermocouple Loop Calibrator

• Measure and source thermocouples• Advance Cold Junction compensation virtually eliminates errors due to ambienttemperature changes • mA measure, switch test and 24 V loop power• HART loop resistor• Secure grip, impact resistant, elastomer protected• Plug and play connector for intelligent Digital Output Sensor (IDOS) UniversalMeasurement Modules

DPI 832Electrical Loop Calibrator

• Dual reading capability : source mA, mV or V and simultaneously measure mAor capture switch trip values• Measure or source mA, mV and V• 24 V loop supply to power transmitters and loops• HART loop resistor• Convenient, one-handed operation• Secure grip, impact resistant, elastomer protected• Plug and play connector for intelligent Digital Output Sensor (IDOS) UniversalMeasurement Modules

DPI 880Multi-Function Calibrator

• Source and reads mA, mV, V, ohms, Frequency and pulses• Simulates and reads 8 RTDs and 12 thermocouples• 32 pressure modules from 10 inH O to 10,000 psi (25 mbar to 700 bar)• Simultaneous dual reading capability• Automatic switch test and pressure leak test• 1,000 point data storage with real time clock• 24 V loop supply• HART loop resistor• Secure grip, impact resistant, elastomer protected• Plug and play connector for intelligent Digital Output Sensor (IDOS) UniversalMeasurement Modules

2


www.stcontrol.com

DPI 620 CEAdvanced Modular Calibration

• Multi-function capabilities : electrical, frequency, temperature and pressure• ATEX/IEC approved• Complete HART communicator included• Modular re-rangeable and expandable concept• Individual components can be used as stand-alone instruments• Allows significant inventory reductions• Simplifies training and improves operator safety• Reduces cost of ownership

DPI 620 CE ISAMC Advance Modular Calibrator IS Version

The Druck DPI620 CE IS with PV 620 IS Pressure Stations are ATEX approvedfor stand-alone use in hazardous areas. These high performance pressure-generating stations can replace conventional hand pumps and gas bottles toprovide greater efficiency, ease of use and improve safety. When combined witha reference instrument, such as the DPI 104, they can be used as gaugecomparators and pressure calibrators.

DPI 610/ 615Portable Pressure Calibrator

• Ranges 2.5 mbar to 700 bar• Accuracy ±0.025% full scale (FS) all ranges• Integral combined pressure/vacuum pump• Dual readout : input and output• 4 to 20 mA loop test : auto step and ramp• Intrinsically safe (IS) version• RS232 interface and fully documenting version• Remote pressure sensors

PC6 - IDOSPressure Calibrator

• Pressure measurement range to 10,000 psi (700 bar)• ±0.025% full scale (FS) accuracy• Voltage and current measurement with sourcing• Pressure to current or voltage conversion• Current or voltage to pressure conversion• Two-wire transmitter simulation• Simultaneous display of pressure and selected function• Timed/Event data storage with date & time stamping• Upload/download Calibration procedures via RS232 interface• Alternative languages available : French, German, Italian and Spanish


www.stcontrol.com

PACE Series Modular Pressure Controller

PACE 6000 Dual Channel Pressure ControllerPACE 5000 Dual Channel Pressure ControllerPACE 1000 Precision Pressure Indicator

• Selection of Chassis and interchangeable control modules• Single, dual or auto range control module configurations• Up to 210 bar (3,000 psi/21 MPa) gauge & absolute• Choice of precision up to ±0.005% Rdg +0.005% FS• Long-term stability up to ±0.01% rdg per annum• Barometric reference option• Switch Test, Leak Test, Test Program, Burst Test, Analogue output and VoltFree Contact options• Negative gauge calibration included as standard• Intuitive icon task driven menu structure

DPI 142Precision Barometric Indicator

• 24 pressure units• Ranges up to 50 psi a• Precision ±0.01% full scale (FS)• Altitude display in feet and meters• Programmable analogue output (optional)• User handbook, calibration certificate and ac/dc • Power adaptor-SUPPLIED AS STANDARD

DPI 150Precision Pressure Indicator

• Ranges up to 3,000 psi (200 bar)• Precision ±0.01% full scale (FS)• Internal or external Intelligent Digital Output • Sensors TM (IDOSTM)• Programmable analog output• RS232 and IEEE-488 communications• Hold, Maximum/minimum value, tare and programmable filter• Barometric Reference (Optional)

DBC 150/650Dry Block Temperature Calibrators

• Ranges from -45º to 650ºC• Rapid heating, cooling and settling• Switch test, ramp, step and preset functions• Reads set temperature and device output simultaneously• Measures reference probe, RTD's, T/C's mA, mV and ohms• Automated calibration via RS 232


www.stcontrol.com

InteCalCalibration Management Software

• Windows®-based software• Compatible with digital pressure controllers and portable field calibrators• Maintenance scheduling utility• Calibration certificates including customization• Compatible with third party calibrators via FCINTF drivers• Stores instrument details, procedures and results

Calibration Test Benches

Our modular concept is designed with flexibility and expansion in mind. Weoffer complete systems from simple workbenches to complex applicationsfeaturing automatic calibrations using AutoCal calibration management software(ISO 9000 compliant).

The calibration modules are comprehensive and are suitable for applicationswith conventional and state-of-the-art instrumentation. Furthermore, mostinstruments can be supplied with calibration certificates traceable to internationalstandards.

Our systems are typically used for the testing and calibration of pressure,temperature and electrical process instruments such as transmitters, switches,gauges, signal converters and temperature sensors.

Sensepoint XCD RTD (Remote Toxic Detector)

Sensepoint XCD RTD (Remote Toxic Detector) has been specifically designedfor use with the Honeywell Analytics' range of Sensepoint toxic and Oxygensensors. This configuration is ideal for a wide range of toxic and Oxygen gasdetection applications. The sensor can be mounted up to 30 metres (100 feet)away from the transmitter in areas that are difficult to access. The transmittercan be mounted at a suitable location away from this area where it is easy toaccess, view its display and interact with via the user interface.

where it is easy to access, view its display and interact with via the user interface.

Sensepoint toxic and Oxygen sensors offer a wide variety of gases andmeasuring ranges. The sensor can be mounted directly to the transmitter aswell as remotely. Sensepoint XCD RTD can be used as a common platform forall toxic and Oxygen gas detection, reducing spares requirements. TheSensepoint sensor design includes an IS portion with a removable sensorcartridge, eliminating the need for a hot work permit when changing the sensorcartridge. The sensor has an IP67 rating for use in the harshest conditions.

Intecal main screen


www.stcontrol.com

UNIK 5000 Pressure Sensing Platform

• Ranges from 70 mbar (1 psi) to 700 bar (10,000 psi)• Accuracy to ±0.04% Full Scale (FS) Best Straight• Line (BSL)• Stainless Steel construction• Frequency response to 5 kHz• High over pressure capability• Hazardous Area certifications• mV, mA, voltage and configurable voltage outputs• Multiple electrical & pressure connector options• Operating temperature ranges from -55 to 125°C (-67 to 257°F)

PTX/ PDCR 1830Depth and Level Pressure Sensors

• Ranges from 0.75 mH O to 600 mH O • Accuracy ±0.06% • Fully welded 17.5 mm titanium construction • Integral lightning surge arrestor • Polyurethane and hydrocarbon resistant cables • Full range of installation accessories

PTX/ PDCR 1730Depth and Level Pressure Sensors

• Ranges from 3.5 mH O to 600 mH O • Accuracy ±0.25% • Fully welded 17.5 mm 316 stainless construction • Pulse power operation • Polyurethane and hydrocarbon resistant cables • Full range of installation accessories

2 2

2 2


www.stcontrol.com

UNIK 5000 Pressure Sensing Platform

• High Speed control -50 ms Input sampling• Motorized Valve control (Position feed back/Servo control)• Dual PID Controller (Heat/Cool controller)• High Accurcy -0.1%• Extensive number of I/O points • (AI : 3 points, DI : 9 points, DO : 9 points and AO : 2 points)• Enhanced Math Functions• Totalize Function• RS-485 Modbus Communications and Transmitter • Power Supply options available

PXG SeriesMicro Controller

• Auto manual operation with A/M key• Universal process value input • Motorized valve control • Position feed back • Servo control• Smart ramp-soak • Profile recovery • Profile cycling • Delayed start • PV start • 4 patterns, max 32 segments/program • Guaranteed soak• Password function• Alarm Flicker function

PXR SeriesMicro Controller

• Re-transmission output in 4-20 mA DC... PV (process value), SV (set value)and MV (manipulated output value) can be transferred to other measuringinstrument• 8-step ramp/soak function... Allows use as a simple programmable controllerwith a set value program• RS-485 communication... Selectable between MODBUS protocol and Z-ASCII(Fuji's original)• Digital input... SV (set value) is selectable and various events are executableby external switches, etc.• Heating and cooling control... Applicable to even a self-heating process• Heater burnout alarm... Equipment damage can be prevented• Various alarm function... Delay action, excitation/non-excitation selection orlatch function can be combined with alarm• Remote SV input... SV (set value) can be selected with 1 to 5 VDC signalsfrom outside

96x96 mm79.5 mm

48x96 mm78 mm

72x72 mm79.7 mm

48x48 mm78.8 mm

24x48 mm97 mm


www.stcontrol.com

PHC/PHAMicrojet Recorder Series

• Color on each channel is selectable The following status printing is availablefor analyzing recording results. • Alarm Red at alarm ON, black at alarm OFF, Channel No. and timeare printed • Burnout • Ink shortage • Recording start mark • Chart speed change mark• High reliability recording • 6 colors continuous trace • Ink is not soluble in water, excellent water/sunlight resistingcharacteristics.• Compact and light-weight design • Mass (weight) : 2.1 kg/100 mm width 6.0 kg/180 mm width • Depth : 199 mm• Simple choice • The 100 and 180 mm width recorders are configurable on eachchannel and accept most industrial inputs • The recorder operates on AC power 100 to 240 V

• Continuous recording • 6 colors • 180 mm width, 12 channels • 100 mm width, 6 channels• Digital data printing in channel color• Self-printing scale in channel color• Tag No./Name printing in channel color, 8 digits (Max)• Message printing in 6 color• Long life recording 6 months continuous operation withone cartridge

PHEMicrojet Recorder Series-E

• This recorder has basically 2 models, user programmable model and factoryconfiguration model• Factory can pre-configure recorder parameters with customer suppliedinformation prior to shipment, reducing the users' total installation cost and time• In case of 1 or 2 continuous recording, 2-color type Ink cartridge (PHZH2002)is also available• Since its life-span became longer than before, you can cut the running-cost in1/4-1/2• Real time clock (calendar) function is available with standard specification


www.stcontrol.com

PHF

• Long Term Record Data Saving 4 years in Compact Flash (In case of using 512 MB Compact Flash)• Saved Data playback Saved data in Memory card can be easily called out and played back on display• Communication Ethernet (10Base-T) is available. (option)• Screen saver Period of non-operation exceeds the setting value of parameter, recorder turnsoff the backlight of LCD.• PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory• Compact size 160 (W) x 144 (H) x 185 (D) mm (Panel mount)1.5 kg compact size• 3-point recording and 6-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/currentinput are available

PHL

• Long Term Record Data Saving 3 years in Compact Flash (In case of using 512 MB Compact Flash)• Saved Data playback Saved data in Memory card can be easily called out and played back ondisplay• Math and totalization These functions are available as standard.• Communication RS485, MODBUS RTU protocol is available. (option) Ethernet (10Base-T) is available. (option)• Screen saver Period of non-operation exceeds the setting value of parameter, recorder turnsoff the backlight of LCD.• PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory• Compact size 160 (W) x 144 (H) x 185 (D) mm (Panel mount)1.5 kg compact size• 9-point recording and 18-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/currentinput are available

PHU

• Long Term Record Data Saving 3years in Compact Flash (In case of using 512 MB Compact Flash)• Saved Data playback Saved data in Memory card can be easily called out and played back on display• Math and totalization These functions are available as standard• Communication Ethernet (10Base-T) is available (option)• Screen saver Period of non-operation exceeds the setting value of parameter, recorder turnsoff the backlight of LCD• PC support softwares (Data Viewer/Parameter Loader) Supplied in a CD-ROM as a part of standard accessory• 36-point max. recording 12 types of thermocouples, 5 types of resistance bulbs and voltage/currentinput are available


www.stcontrol.com

Hybrid Type Duosonics

• Expansion of applicable fluid domain enabled by automatic switching• High accuracy of ±0.5 to 1%• Flow velocity distribution within the piping is visible• Quick response (0.2 sec)Specifications :Sensor type : FSWS12 : for Ø40 to Ø200 mm/-40 to 100˚C FSWS21 : for Ø100 to Ø400 mm/-40 to 80˚C FSWS40 : for Ø200 to Ø500 mm/-40 to 80˚C FSWS50 : for Ø500 to Ø1,000 mm/-40 to 80˚CMeasurement range : -4 to 0 to +32 m/s (min. 0.3 m/s)Response Time : 0.2 sec or lessOutput signal : 4 to 20 mA DC, pulse output, alarm outputCommunication function : RS485 or RS232CAccuracy : ± 0.5 to 1.0% of rateStructure : IP67 Watertight for both flow transmitter and detectorPower-supply voltage : 100 to 240 VAC or 20 to 30 VDCCable length between detector and flow transmitter : 150 m max

Compact Type TIME DELTA-C

• Small, lightweight flow transmitter having a high tolerance for air bubblesin liquid• High accuracy measurement (± 1.0% of rate)• Setting operation can be performed from the front side of theflow transmitter.• With RS232C/RS485 communication function provided (optional)Specifications :Sensor type : FLSE1 : for Ø25 to Ø100 mm/-20 to 100˚C FLSE2 : for Ø50 to Ø225 mm/-20 to 100˚C FSGS3 : for Ø50 to Ø300 mm/-40 to 80˚C FSGS4,5 : for Ø200 to Ø6,000 mm/-40 to 80˚C FSD22 : for Ø13 to Ø100 mm/-40 to 100˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚CMeasurement range : -32 to 0 to +32 m/s (min. 0.3 m/s)Response Time : 0.2 sec. or lessOutput signal : 4 to 20 mADC, pulse output, alarm outputCommunication function : RS485 or RS232CAccuracy : ± 1.0% of ratePower-supply voltage : 100 to 240 VAC or 20 to 30 VDC

Flow transmitter(FSH)

Detector(FSW)

Flow transmitter(FSV)

Detector(FSG, FSD, FLS)


www.stcontrol.com

Compact M-Flow PW

• Converter as compact as140x130 mm in size (front face)• High-speed response of 0.2 seconds• Accuracy : ±1.5 to 2% of rating• Low-cost flowmeter ideal for measurement of clean fluidSpecifications :Sensor type : FLSE12 : for Ø25 to Ø100 mm/-20 to 100˚C or 120˚C FLSE22 : for Ø50 to Ø225 mm/-20 to 100˚C or 120˚C FLSE31 : for Ø50 to Ø300 mm/-20 to 80˚C FLSE41 : for Ø300 to Ø600 mm/-20 to 80˚CMeasurement range : -10 to 0 to 10 m/s (min 0.3 m/s)Response Time : 0.2 secondsOutput signal : 4 to 20 mADC, Pulse output and Alarm outputCommunication function : RS485 or RS232CAccuracy : ± 1.5 to 2% of rateStructure : Waterproof detector and converter structure conforming to IP65Power-supply voltage : 100 V to 120 VAC, 200 to 240 VAC or 20 to 30 VDCCable length between detector and converter : 30 m max

2 Lines Type

• High resistance to air bubbles in liquid• Simultaneous 2-line• High-accuracy measurement of 1.0% of rating• Rarely affected by temperature and pressure fluctuation of fluidSpecifications :Sensor type : FSGS3 : for Ø50 to Ø400 mm/-40 to 80˚C FSGS5 : for Ø200 to Ø6,000 mm/-40 to 80˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚CMeasurement range : -32 to 0 to 32 m/s (min 0.3 m/s)Response Time : within 0.5 secondsOutput signal : 4 to 20 mADC, Pulse output and Alarm outputCommunication function : RS485 or RS232CAccuracy : ± 1.0% of ratePower-supply voltage : 100 V to 240 VAC or 20 to 30 VDCCable length between detector and converter : 150 m max

Flow transmitter(FLR)

Detector(FLS)

Flow transmitter(FSH)

Detector(FSG, FSD)


www.stcontrol.com

Portable Portaflow-C

Specifications :Sensor type : FSD22 : for Ø13 to Ø100 mm/-40 to 100˚C FSD12 : for Ø50 to Ø300 mm/-40 to 100˚C FSD32 : for Ø50 to Ø400 mm/-40 to 200˚C FSD41 : for Ø200 to Ø1,200 mm/-40 to 80˚C FSD51 : for Ø200 to Ø6,000 mm/-40 to 80˚CMeasurement range : -32 to 0 to 32 m/s (min 0.3 m/s)Response Time : within 1 secondAnalog output signsal : 4 to 20 mADCAnalog intput signsal : 4 to 20 mADC / 1 to 5 VDCAccuracy : ±1.0% of ratePower-supply voltage : 100 to 240 VAC, Built-in batterySD memory card : Saves instantaneous value, total value, etcOptions : With printer, Flow velocity profile• The measurement data can be stored in a SD Large memory card for a longtime• Consumed heat quantity can be measured• Designed for 12 hours of continuors operation with its own builtin battery• Provided with a printer (option)• A useful USB port given for connecting with a PC

Flow transmitter(FSC)

Detector(FSD)

Computation function ofconsumed heat quantity :This function calculated the heatquantity received and sent with liquid(water) in cooling and heating

Converter

Converter

Consumed heat quantityq = K . Q . (T1-T2)K : heat quantityconversion factor(For heating K = 4.123)

Detector(type : FSD)Temperature sensor

T1 : Temperature of the heatingmedium on the emitting side

T2 : Temperature of the heatingmedium of the receiving side

Q : Flow rate of theheating medium

LoadHeat

source

Temperature sensor


www.stcontrol.com

D5000 SeriesUniversal Type Digital Panel Meter

• No adjustment after unit replacement is required• Free power supply voltage (90 to 264 VAC, 9 to 60 VDC)• Enabling short delivery and quick response to any applications even insmall stock• The communication function (RS-232C/RS-485) enables personal computersto easily process and control various data• CE/UL/CSA (To be acquired soon)

Main BoardTwo type of main board1. 90 to 264 VAC power supply2. 9 to 60 VDC power supply

Display BoardTwo type of display board1. Single display2. Multiple (monitor HI and LO set point) display

Output BoardSeven type of output board0. None1. HI & LO setpoint2. Analog output3. RS-232C4. RS-4855. HI & LO setpoint+analog output6. HI & LO setpoint+analog output+RS-232C7. HI & LO setpoint+analog output+RS-485

Input BoardEighteen type of input board01. DC voltage (±99.99 mV)02. DC voltage (±999.9 mV to ±600 V)03. DC current (±9.999 mA to ±999.9 mA)04. AC voltage AVG (99.99 mV to 9.999 V)05. AC voltage AVG (99.99 V to 600 V)06. AC voltage RMS (99.99 mV to 9.999 V)07. AC voltage RMS (99.99 V to 600 V)08. AC current AVG (9.999 mA to 999.9 mA)09. AC current AVG (5 A)10. AC current RMS (9.999 mA to 999.9 mA)11. AC current RMS (5 A)12. Resistance (99.99 Ω to 99.99 kΩ)13. Temperature (Thermocouple)14. Temperature (RTD)15. Frequency (Open collector, Logic, Magnet)16. Frequency (50 to 500 Vrms)17. Strain gauge18. 1 to 5 V, 4 to 20 mA

Main Unit Output Unit Input Unit

Display Unit


www.stcontrol.com

FKH/FKP/FKAPRESSURE AND ABSOLUTE TRANSMITTER

• High accuracy ±0.065-0.2% accuracy for all calibrated spans is the standard feature for all APmodels covering 8.125 to 3,000 kPa {0.13 to 30 bar} high pressure range. Fuji'smicro-capacitance silicon sensor assures this feature for all suppressed calibration ranges without additional adjustment• Minimum inventory Electronics unit, communication module, local indicators and electronics housingare interchangeable among all FCX–AIII models• Fuji/HART bilingual communication module The communication module is "bilingual" to speak both Fuji proprietary protocoland HART. Any HART compatible devices can communicate with FCX-AIII seriestransmitters.• Application flexibility Example features that render the FCX-AIII suitable for almost any processapplications includes : • Full range of hazardous location approvals • Built-in RFI filter and lightning arrester • 5-digits LCD meter • The maximum span of each sensor can be converted to in differentunits using below factors• Burnout current flexibility (Under Scale : 3.2 to 4.0 mA, Over Scale : 20.0to 22.5 mA) Burnout signal level is adjustable using Model FXW Hand Held Communicator (HHC) to comply with NAMUR NE43

• High accuracy ±0.15% accuracy for all calibrated spans is the standard• Feature for pressure transmitter covering 50 to 10,000 kPa (or 0.5 to100 kgf/cm2). Fuji’s Micro-capacitance silicon sensor assures this feature

(L-Type) (T-Type)

Hydroseal® Diaphragm Version


www.stcontrol.com

FKBRemote Seal TypePressure Transmitter The FCX -AIII pressure transmitter accurately measures gauge pressureand transmits a proportional 4 to 20mA signal The transmitter utilizes a unique micro machined capacitance siliconsensor with state-of-the-art microprocessor Technology to provide exceptional performance and functionality Totally welded construction of the seals assures excellent reliability inhigh temperature and highly corrosive process Conditions

FKX Small Flange Remote Seal Type Differential Pressure Transmitter

• Directly connectable to 1-1/2 in and 2 in flanges The transmitter is connectable to 1-1/2 in and 2in pipes without a reducer.• Flow measurement without impulse piping 1/2 in and 3/4 in flange size is also available. This differential pressuretransmitter allows connection to 1/2 in and 3/4 in flanges of a general size forthe orifice tap, which eliminates the need of using a impulse piping. Problemswith the impulse piping, such as clogging , leaks or corrosion can be solved. In addition, the following process connection is also available. Screw connection1/2-14NPT, 3/4-14NPT, Rc 1/2, Rc 3/4• Minimum environmental influence The “Advanced Floating Cell” design which protects the pressure sensoragainst changes in temperature, static pressure and overpressure substantiallyreduces total measurement error in actual field applications• Fuji/HART ® bilingual communications protocol FCX -AIII series transmitter offers bilingual communications to speak both Fujiproprietary protocol and HART ®. Any HART compatible devices cancommunicate with FCX-AIII.

FKC DIFFERENTIAL PRESSURE (FLOW) TRANSMITTER

The FKC–AIII differential pressure (flow) transmitter accurately measuresdifferential pressure, liquid level, gauge pressure or flow rate and transmits aproportional 4 to 20 mA signal. The transmitter utilizes a unique micro machinedcapacitance silicon sensor with state-of-the-art microprocessor technology toprovide exceptional performance and functionality

(L-Type) (L-Type)


www.stcontrol.com

Temperature Sensors

Main Applications• Temperature Measurement & Control for industrial applications Key Features and Advantages Resistance Temperature Detector (RTD)• Type of Sensor : PT-50, PT-100, PT-500, PT-1000, NI-1000, NI-100, NI-120& etc• Standard : IEC 751 & BS EN 60751Thermocouple Sensor• Type of Sensor : K, J, T, E, R, S, B & etc• Standard : IEC 584 & BS EN 60584• Design : According to customer’s specification & customisation to customer’srequirement

Thermowells

Main Applications• Protect temperature sensors and bi-metallic thermometers by insulating themfrom their environment.Key Features and Advantages• Type of thermowells : Thread Thermowell, Welded Thermowell, Sanitary FlangeThermowell & etc• Construction : Drilled Bar Stock Thermowell, Fabricated • Thermowell, Jacket Type Thermowell & etc• Flange Standard : ASME B16.5, JIS, DIN, API• Thermowell Design : Shell Design, Vanstone Design, API Design & Others• Welding Standard : ASME IX Qualified Welder, WPS & PQR• Dye Penetration Check, Hydrostatic Test, Radiographic Check, UltrasonicCheck, Positive Material Identification, Ferrite Count & Other MechanicalTests are available upon request


www.stcontrol.com

Levels Control Instruments

• Level control for a wide range of applications :Key Features and Advantages• Level Magnetic Float Level Switches• Cable Float Level Switches• Side Mounted Level Switches• Tuning Fork Level Switches• Capacitance Level Switches• Rotary Paddle Level Switches• Magnetic Level Gauges• Magnetic Level Gauges• Ultrasonic Level Transmitters• Radar Level Transmitters

Engineering Assembly Work

To withdraw samples from process pipe lines for periodic quality check andto Protect Level Sensor Probes which measures process level.Key Features and Advantages :• Sampling Probe according to ASME Standard• Level Chamber according to piping specification B31.3• Skid Assembly as per Pharmaceutical Standard• Other products : Vent Header, Condensation Port, Catalyst Probe Assembly,Recovery Tank, Cooling Tower & Others• Dye Penetration Check, Hydrostatic Test, Radiographic Check, UltrasonicCheck, Positive Material Identification Tests are available for request

Wires & Accessories

Wires and wiring insulation solutions for temperature measurement andcontrol, especially for long distance temperature measurements• Explosion Prood Head (ATEX, FM/CSA)• Weather Prood Head (IP 65 to IP 67)• Thermocouple Wire Conform to ANSI, IEC & JIS• RTD Extension Cable & Thermocouple Extension Cable• High-Temp Connector, Standard Connector, Miniature Connector

Instrument Product Guide 2011

Documents

Transcript of Instrument Product Guide 2011