INSTRUCTIONS Directions For Operating Zep® Model “B” Sprayer · ZDL 300-17 • 7/11 Zep...
Transcript of INSTRUCTIONS Directions For Operating Zep® Model “B” Sprayer · ZDL 300-17 • 7/11 Zep...
ZDL 300-17 • 7/11
Zep INDUSTRIAL DISPENSING SOLUTIONS
INSTRUCTIONSDirections For Operating Zep® Model “B” Sprayer
1. Work with your Zep Sales Associate to select the proper
chemical / solvent for your application.
2. Remove Filler Cap from sprayer.
3. Fill sprayer 2/3 full with the Zep chemical/solvent.
Leave 1/3 of tank for air chamber.
Model B capacity one quart liquid.
4. Replace cap and tighten.
5. Charge sprayer with compressed air by holding standard
compressed air chuck on valve stem of Filler Cap.
Charge to a pressure of at least 80 pounds (p.s.i.).
Maximum pressure should not exceed 200 pounds.
6. Sprayer is ready for use.
7. For best results, the liquid used in the sprayer should
be lighter than a No. 10 engine oil.
(If liquid is too heavy a pin stream will result.)
Dilute with a suitable diluent until desired spray is obtained.
CAUTION: Water-based solutions should never be used in sprayers.
Valve LubricationTo correct stuck or dragging Valve, loosen Stu�ng Box Nut (No. 115)
and apply lubricant to the valve stem (No. 110) at the stu�ng box (No. 114).
Re-adjust Stu�ng Box Nut No. 115) for proper action.
Model “B” FeaturesPlastic adjustable chrome plated nozzle (#602).
Removable cap (No.118) for fast re-�lling, re-use.
Pressurized by standard compressed air chuck.
All brass �ttings.
Factory tested for safety to 200 pounds (p.s.i.) pressure.
Heavy-duty tank construction. Steel (Enameled Blue).
AccessoriesNozzles: Flat Spray: Zep Part # T60201,
Extra Fine: Zep Part # T61101, Extra Coarse: Zep Part # T61901,
12” Plastic Pin Stream Nozzle: Zep Part # W40601.
These nozzles require Adaptor: Zep Part # T34501.
Repair KitsModel A Kit No.5 (includes parts marked by asterisk (*) Zep Part # T21901.
Model A Kit No.10 (includes all parts itemized above) Zep Part # T31301.
108 - Inner Adapter* 110 - Valve* Zep Part # T28601 Zep Part # T29701
117 - Valve Trigger 118 - Filler Cap Assembly* Zep Part # T38301 Zep Part # T39501
120 - Filler Cap Gask* 121 - Valve Core Zep Part # U54901 Zep Part # T41101
122 - Black Cap 602 - Adjustable Nozzle Zep Part # T28601 Zep Part # T07601
156 - T-Handle Zep Part # T54501
2/3Liquid
Liquid Capacity is One Quart
1/3Air