Instruction Manual - Home - Rossmax | Your total ... · Model: NBR-10 Rossmax 3 IN 1 Reader...
Transcript of Instruction Manual - Home - Rossmax | Your total ... · Model: NBR-10 Rossmax 3 IN 1 Reader...
Model: NBR-10Rossmax 3 IN 1 Reader
Instruction Manual www.rossmax.com
IN0N
BR10
0000
000X
XOB
M_IB_
NBR10
_EN_
ver142
1
Manufacturer: Rossmax Swiss GmbH, Tramstrasse 16, CH-9442 Berneck, Switzerland
WarrantyThis instrument is covered by a 2 year guarantee from the date of purchase. The guarantee is valid only on presenta-tion of the guarantee card completed by the dealer con-firming date of purchase or the receipt. Batteries are not included. Opening or altering the instrument invalidates the guarantee. The guarantee does not cover damage, accidents or non-compliance with the instruction manual. Please contact your distributor. Date of purchase:
Store where purchased:
Price Paid (excl. Tax):
WARNING: The symbol on this product means that it's an electronic product and following the European directive 2012/19/EU the electronic products have to be dispose on your local recycling centre for safe treatment.
IntroductionRossmax NBR-10 is built with Bluetooth Smart technology which enables to transmit the measurement data from Ross-max health device (Blood pressure monitors, activity moni-tors and body fat analyzer) to smart phones.Note: Smart phones require to be compatible with IOS 7.0
or above with Bluetooth Smart support.
Name/Function of Each Part
AC adaptor jack
Communication area
Low battery indicator
On/Off/Communication mode switching key
Start to Use1. To transfer the data, you need to download “Healthstyle”
app from the App Store as .2. Turning on the bluetooth in smartphone as .3. Setting the connection between smart phone and Reader
as . 3.1 Powering on the Reader and the LED will flash blue to
indicate it is ready for use. 3.2 Clicking the icon“Data Transfer”on app. 3.3 The LED will flash blue on Reader while establishing
the connection. 3.4 When the LED on Reader stays on blue, and screen
displays "Connect successfully", it indicates a “good connection”.
3.5 When the LED on Reader stays on red, and screen displays "Error. Lost connection", it indicates a “fail connection”.
Note: If it fails to connect, please turn off the Reader, restart “Healthstyle” app and refer to the step 3 to reestab-lish the connection.
4. Starting to transmit the measured values as . 4.1 Hold the NFC symbol of NFC-enagled healthy
devices close to the communication area of th Reader.
4.2 The LED will flash blue on Reader while transmitting data.
Note: For body fat analyzer, you should choose the meas-urement data in which memory zone to be transmit-ted by pressing " " button to select "P1, P2, P3 or P4" and to press "M" key.
5. After finishing the transmission: 5.1 If transmission successful, the Reader appears blue LED
and app displays result as -1. 5.2 If transmission fail, the Reader appears red LED as
-2 .Note: If it fails to transmit, turn off the Reader, close the
reminder dialog box and them click "Data Transfer" icon to retransmit the data.
Using the AC Adaptor (Optional)1. Connect the AC Adaptor with the AC Adaptor jack on the
right side of the unit.2. Plug the AC Adaptor into the socket. (AC Adaptors with
required voltage and current indicated near the AC Adap-tor jack.)
Caution: 1. Please unload the batteries when operating with the
AC mode for a longer period of time . Leaving the bat-teries in the compartment for a long time may cause leakage, which may lead to damage of the unit.
2. No batteries are needed when operating with the AC mode.
3. AC Adaptors are optional. Please contact the distribu-tor for the compatible AC Adaptors.
4. Use only the authorized AC Adaptor with this blood pressure monitor. Information for the authorized AC adaptor, please refer to APPENDIX 1.
Installing Batteries1. Press down and lift the battery cover in the direction of the
arrow to open the battery compartment.2. Install or replace 4 “AAA” sized batteries in the battery
compartment according to the indications inside the com-partment.
3. Replace the battery cover by clicking in the bottom hooks first, then push in the top end of the battery cover.
4. Replace the batteries in pairs. Remove batteries when unit is not in use for extended periods of time.
You need to replace the batteries when: 1. low battery LED started flashing red. 2. the On/OFF/ Communication key is pressed and the LED
not flash blue on the Reader.Caution:
1. Batteries are hazardous waste. Do not dispose them together with the household garbage.
2. There are no user serviceable parts inside. Batteries or damage from old batteries are not covered by war-ranty.
3. Use exclusively brand batteries. Always replace with new batteries together. Use batteries of the same brand and same type.
SpecificationsTransmission protocol
Bluetooth Smart technology
Work distance About 0-10 metersOperation Environment
10°C~40°C (50°F~104°F); 40%~85% RH; 700~1060 hPa
Storage and Transportation Environment
-10°C~60°C (14°F~140°F); 10%~90% RH; 700~1060 hPa
DC Power Source DC 6V four AAA Batteries
AC Power Source DC 6V, ≥600mA(Plug size: outer(-) is Ø4.0, inner(+) is Ø1.7)
Dimensions 152 (L) x 75 (W) x 33 (H) mmWeight 101g (G.W.) (w/o Batteries)
Troubleshooting Problem Cause Correction
No data is trans-ferred.
App is not download-ed or it has not been started.
Refer to section of “Start to Use”
Battery power weak or exhausted
Replace them with four new batteries.
The NFC mark on the healthy device is not aligned to the NFC mark on the Reader.
Match the NFC marks on the healthy device and the Reader.
The connection be-tween the Reader and smart phone is not connected properly.
Power on the Reader, restart app to reconnect the Reader and smart phone.
Data transfer was at-tempted near a mag-netic source.
Transfer data in a loca-tion not affected by an electromagnetic inter-ference.
Note: If the unit still does not work, return it to your dealer. Under no circumstance should you disassemble and repair the unit by yourself.Cautionary Notes1. The unit contains high-precision assemblies. Therefore,
avoid extreme tem peratures, humidity, and direct sunlight. Avoid dropping or strongly shocking the main unit, and protect it from dust.
2. Clean the Reader body and the cuff carefully with a slight-ly damp, soft cloth.
3. Leaky batteries can damage the unit. Remove the batteries when the unit is not used for a long time.
4. The unit should not be operated by children so to avoid hazardous situations.
5. If the unit is stored near freezing, allow it to acclimate at room temperature before use.
6. This unit is not field serviceable. You should not use any tool to open the device nor should you attempt to ad-just anything inside the device. If you have any problems, please contact the store or the doctor from whom you purchased this unit or please contact Rossmax Interna-tional Ltd.
7. Electromagnetic interference: The device contains sensi-tive electronic components. Avoid strong electrical or elec-tromagnetic fields in the direct vicinity of the device (e.g. microwave ovens).
8. Dispose of device, batteries, components and accessories according to local regulations.
9. This monitor may not meet its performance specification if stored or used outside temperature and humidity ranges specified in Specifications
Free do
wn
load
"H
ealthstyle" A
PP an
d tu
rn o
n A
PP
Turn
on
Blu
etoo
th
in sm
artph
on
e
3.1 - Pow
er on
th
e Read
er
Co
nn
ect the R
eader to
Smartp
ho
ne via B
lueto
oth
Turn off the Reader, restart “H
ealthstyle” app and go back to step 3 to reestablish the connection.
Pressing "" button to
select "P1, P2, P3 or P4" to
be transm
itted,then pressing "M
" key to con-firm
which m
emory zone
you want to transm
it the data.
Measurem
ent data num
ber
Ho
ld th
e NFC
symb
ol o
f you
r activity mo
nito
r, Blo
od
pressu
re mo
nito
r and
bo
dy fat an
alyzer clo
se to th
e NFC
symb
ol o
f Read
er
3.2 - Click “D
ata tran
sfer”on
APP
3.3 - Co
nn
ection
OK
OR
3.4 - Co
nn
ection
fail
13
2
*Requires IOS 7.0 or above and Bluetooth Sm
art for iPhone and iPad.
Activity m
on
itor
Blo
od
pressu
re mo
nito
r
Quick G
uide Model: N
BR-10
Wait fo
r tran
sferring
4
Transm
ission
Fail
Close the reminder dialog box and then click “ D
ata Transfer ” icon to retransm
it the data
Red LED
OR
bo
dy fat an
alyzer
Transm
ission
OK
Measurem
ent data are displayed on APP
Blue LED
5 -15 -2
Healthstyle
Blue LEDRed LED