Instruction for Fixing a Cracked iPhone 5C Screen:

Step 1

Turn off the iPhone 5C and use eject pin to take out the SIM card tray.

Step 2

Undo 2 bottom screws next to the dock connector with Pentalobe screwdrivers.

Step 3

Lift up the LCD screen assembly with the help of the spudger tool.

Step 4

Use small Phillip screwdrivers to release 4 screws to remove the metal plate used to cover the LCD

assembly connectors.

Step 5

Release 3 connectors to separate the LCD display assembly from the iPhone 5C rear housing with spudger

tool. Then the LCD assembly is free.

Step 6

Release 2 screws on the metal shield to remove the ear speaker.

Step 7

Remove the sensor cable with the front facing camera.

Step 8

Undo 2 screws on the metal shield covering the home button to remove the home button.

Step 9

Release 6 screws on the LCD heat shield to remove it.

Step 10

Get a new iPhone 5C replacement screen and install the LCD heat shield to the new screen, and then

fasten it with 6 screws.

Step 11

Put back the sensor cable with front camera back and the ear speaker with its metal shield to the LCD

display assembly.

Step 12

Install the home button and the metal shield, and secure it with 2 screws.

Step 13

Buckle 3 connectors to the motherboard and fasten the metal shield with 4 screws.

Step 14

Press down the iPhone 5C LCD assembly make sure all the clips are in place.

Step 15

Install 2 bottom screws to fasten the LCD assembly and rear housing.

Step 16

Insert the SIM card tray and power the device on to make sure it works as normal.