Instruction 2010
-
Upload
minfei-chew -
Category
Documents
-
view
224 -
download
0
Transcript of Instruction 2010
-
7/28/2019 Instruction 2010
1/16
KREAXIONS (M) SDN. BHD.( Company No.: 771725-x)
Address: No. 34-1, Jalan Melaka Raya 32.
Taman Melaka Raya 1, 75000 Melaka.
Jason: 016-5008391 , Eric: 012-5053832, Chan: 012-4086894 & Terry: 016-3333079
Email: [email protected]
Each punches comes with 3 different attachment, guide to create 2 different borders and 2
different corners (4 different using one punch)
(Designed to be used with 120-200gsm card, normal A4 paper not encouraged.)
These punches are designed to create a continuous border trip as long as you want, makingcards and even home decorate you want
Picture show as above is punch itself
Include with the 3 different sets of guides
Sets are labelled as "A" "B" and "C" and each set contains 2 guides that clip together
Insert the guides labelled "A" for a border punch, the guides labelled "B" for a style of corner
and "C" guides for another different corner style
Guide labelled "A"
Step 1 Step2 Step3
Insert paper into the punch with Cover half of the first flower as above Continuous punch until
the guide A and begin to punch to punch for second flower completed a nice border
at border
A series of 4 in 1 punches are to create beautiful corners and borders
When punches are turned upside down
they do not fall over so your precision work is much easier to do
-
7/28/2019 Instruction 2010
2/16
Guide labelled "B"Step1 Step2
~Insert corner of the paper by use the punch with ~This step is for all angle
the corner tool B and begin the punch at angle
Guide labelleld "C"Step1 Step2
~Insert corner of the paper by use the punch with ~This step is for all edge
the corner tool C and begin the punch angle
Without Guide ToolStep1 Step2 Step3
~Insert the paper by use the punch without ~Take a half of pattern (refer the line ~Continuous punch by repea
guides for border as above ) punch for second pattern step 2 until completed a bor
~Sample card completed by use the guide "A" , "B" and "C" and without guide
Plastic Square Help FrameStep1 Step2 Step3
~Put either one of the plastic square ~Draw the lines by follow the plastic ~Hold tight to the Circle Cutter
help frame on top of the paper square help frame and pull the paper to cut the circle
-
7/28/2019 Instruction 2010
3/16
t the
der
-
7/28/2019 Instruction 2010
4/16
Step 5
~Turn over the punch and put in the punch inside of the ~ Picture above show a sample card of the circle done
circle and follow the centre line to punch the pattern by using circle cutter n plastic square help frame
Star Help FrameStep 1 Step 2 Step 3
~Draw the star shape by using ~Put in the star corner and ~Sample star after done by using star help frame
star help frame then cut out punch with the guides A
Oval Help FrameStep 1 Step 2
~Use pencil mark all the points
cutter on the point B to cut from B1 to B2
Step 3 Step 4 Step 5
~Hold the circle cutter on the point C, ~Hold the circle cutter on the point D, ~Sample of oval done by
then pull the paper cut from point B2 to A1 then pull the paper cut from point A2 to B1 oval help frame
A1 to A2, using the same measurement and hold the circle
~Hold the circle cutter on point A, then pull the paper cut from
Step4
B
C
D
A1
A2 B1
B2
AB
C
D
A1
A2 B1
B2
A
B
C
D
A1
A2 B1
B2
A
-
7/28/2019 Instruction 2010
5/16
-
7/28/2019 Instruction 2010
6/16
-
7/28/2019 Instruction 2010
7/16
-
7/28/2019 Instruction 2010
8/16
-
7/28/2019 Instruction 2010
9/16
-
7/28/2019 Instruction 2010
10/16
-
7/28/2019 Instruction 2010
11/16
-
7/28/2019 Instruction 2010
12/16
-
7/28/2019 Instruction 2010
13/16
-
7/28/2019 Instruction 2010
14/16
-
7/28/2019 Instruction 2010
15/16
Sample bookmarks & cards done by using 4 in 1 punchers.
~901 ~902 ~903 ~904 ~905
~906 ~909 ~910 ~911 ~912 ~913
~915 ~917 ~918 ~919 ~920
~921 ~922 ~923 ~924 ~302
~303 ~304 ~305 ~306 ~307
~601 ~602 ~603 ~604 ~606 ~609
-
7/28/2019 Instruction 2010
16/16