Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
-
Upload
anil-patial -
Category
Documents
-
view
245 -
download
2
Transcript of Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
1/82
MY BLOG
NSTALLING BI APPS 11.1.1.8.1: PART 1 – PRE-
REQUISITESy Paul Cannon (http://www.redstk.com/author/paulcannon/) on 22nd May 2014 24 comments
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#comments)
his is the first of three blogs performing a basic out of the box installation of the newly released Oracle BI
pplications 11.1.1.8.1.
m performing a completely fresh installation on our Exalytics/Exadata servers using an E-Business Suite
2.1.3 database as the data source.
n part 1 below I’ll be going through the pre-requisites required before BI Apps can be installed, including
nstalling OBIEE, ODI and creating the warehouse and repositories using the RCU.
art 2 will cover installing and configuring BI Apps – http://blog.3sixty-analytics.com/?p=1300
http://blog.3sixty-analytics.com/?p=1300)
art 3 will demonstrate a simple example of load data into the warehouse and viewing it in OBIEE –
http://blog.3sixty-analytics.com/?p=1417 (http://blog.3sixty-analytics.com/?p=1417)
or the pre-requisites for BI Apps we’ll be performing the following steps:
1. Review System Requirements
2. Determine the Environment
3. Download BI Apps Install files from Oracle
4. Configure Oracle DB for warehouse & repositories
5. Install a JDK
http://blog.3sixty-analytics.com/?p=1300http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#commentshttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#commentshttp://blog.3sixty-analytics.com/?p=1417http://blog.3sixty-analytics.com/?p=1300http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#commentshttp://www.redstk.com/author/paulcannon/
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
2/82
6. Install Oracle Business Intelligence Enterprise Edition
7. Upgrade Weblogic server to 10.3.6
8. Install Oracle Data Integrator
9. Create schemas for Oracle BI Applications
REVIEW SYSTEM REQUIREMENTS
efore beginning review the system requirements for BI Apps. This can be found at
ttp://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html)
nd downloading the file for the release of BI Apps being installed, in this case 11.1.1.8.1:
ystem Requirements and Supported Platforms for Oracle Business Intelligence Applications Release
1.1.1.8.1 ( xls (http://www.oracle.com/technetwork/middleware/bi/biapps-11-1-1-8-1-2199792.xlsx) )
his is a spreadsheet with six tabs covering required versions for the OS, additional software etc. The
upport source applications tab is required later on during the install as this lists the projects included
within BI Apps.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_01.png)
ote: it doesn’t mention it in the spreadsheet but we found out the hard way that the database which will
old the data warehouse needs to have the spatial component installed. To see if it is run the following
ommand in sqlplus:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_01.pnghttp://www.oracle.com/technetwork/middleware/bi/biapps-11-1-1-8-1-2199792.xlsxhttp://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
3/82
elect comp_id, version, status, comp_name from dba_registry where comp_id=’SDO';
spatial is installed you will get one record returned:
COMP_ID VERSION STATUS COMP_NAME
------------- ------------- --------------- ---------------
SDO 11.2.0.3.0 VALID Spatial
spatial isn’t installed then install it before continuing.
DETERMINE THE ENVIRONMENT
My Environment has four servers:
1. E-Business Suite 12.1.3 database server (with VISION demo data)
2. Database server (for the DW warehouse) with Oracle 12c pre-installed. This is our Exadata server3. Repository Database Server. A small 12c database just used for repositories and sample data
4. BI Apps Server. This is our Exalytics server.
ll four are linux x86-64 and I have all the userids/passwords/access I need on all of them.
DOWNLOAD BI APPS INSTALL FILES FROM ORACLE
he following set of files needs to be downloaded before starting. Most come from the BI Apps media
ack on edelivery, but there are a couple patch files which are downloaded from the oracle support
website.
delivery.oracle.com
roduct Pack: Oracle Business Intelligence
latform Linux x86-64
Media Pack: Oracle Business Intelligence Applications 11.1.1.8.1 Media Pack for Linux x86-64
iles:
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
4/82
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 1
of 3) (Part 1 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 1
of 3) (Part 2 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 2
of 3) (Part 1 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 2
of 3) (Part 2 of 2)Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 3
of 3)
Oracle Business Intelligence Developer Client Tool (11.1.1.7.0) for Microsof
t Windows (64bit)
Oracle Business Intelligence Applications (11.1.1.8.1).zip
Oracle Business Intelligence Applications RCU (11.1.1.8.1) for Linux x86-64.
zip
Oracle Data Integrator 11g (11.1.1.7.0) (Part 1 of 2).zip
Oracle Data Integrator 11g (11.1.1.7.0) (Part 2 of 2).zip
Oracle Fusion Middleware Platform Patches for Oracle Business Intelligence A
pplications (11.1.1.8.1) (Part 1 of 2).zip
Oracle Fusion Middleware Platform Patches for Oracle Business Intelligence A
pplications (11.1.1.8.1) (Part 2 of 2).zip
Oracle Fusion Middleware Platform Patches for Oracle Business Intelligence A
pplications for Linux x86-64.zip
Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.7.0) for Li
nux x86-64.zip
he other files in this media pack I didn’t download as I didn’t need them – Windows versions of some of
he files, Weblogic server or the Endeca samples.
roduct Pack: Oracle Database
latform Linux x86-64
Media Pack: Oracle Database 12c Release 1 (12.1.0.1.0) Media Pack for Linux x86-64
ile:
Oracle Database 12c Release 1 Client (12.1.0.1.0) for Linux x86-64
My Oracle Support
downloaded the following patch file just by searching for the patch number and platform:
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
5/82
p13529623_1036_Generic.zip (This is the patch for Weblogic 10.3.6)
NSTALL ORACLE CLIENT ON THE BI APPS SERVER
t various points during the installation we’ll need to connect to the data warehouse on the database
erver, so although not compulsory, it’s easier if we have a basic Oracle client installed on the BI Appserver before we begin.
nzip the “Oracle Database 12c Release 1 Client (12.1.0.1.0) for Linux x86-64” zip file and run the
unInstaller command from the client directory. I chose a custom install with just SQL*Plus, Oracle
atabase Utilities and the Oracle Call Interface and placed it in a home directory by itself.
CONFIGURE ORACLE DB FOR WAREHOUSE & REPOSITORIES
Once BI Apps is fully installed there will be a lot of tra!c between the data warehouse and BI Apps servers
s the users run reports. To maximize the throughput of data the SDU and TDU parameters should be
ncreased from the default 2KB setting.
n the listener.ora on the database server I added (SDU=16384)(TDU=16384):
(SID_DESC= (SDU=16384)(TDU=16384)
(GLOBAL_DBNAME=dbserver.local.com)
(ORACLE_HOME=C:appproduct12.1.0ora12c)
(SID_NAME=ora12c))
hen added the same parameters to the tnsnames.ora on the BI Apps server:
dbserver =
(DESCRIPTION = (SDU=16384)(TDU=16384)
(ADDRESS = (PROTOCOL = TCP)(HOST = dbserver.local.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = ora12c.local.com)
)
)
Check the guidelines for Oracle Database in the BI Apps install doc (sections 2.1 & 2.2) for more details on
his and other aspects to consider.
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
6/82
nstall a JDK
I apps required a JDK and the install guide tells you to download and install JDK 1.6.0_35 or better.
owever it’s not strictly needed as OBIEE installs its own JDK and this is 1.6.0_35, so we can use that for
ll the BI Apps components.
nstall Oracle Business Intelligence Enterprise Edition
he starting point for a BI Apps installation is OBIEE 11g. BI Apps now integrates itself with an existing
OBIEE installation and is controlled by the same Enterprise Manager instance.
here are a number of ways of installing OBIEE and what BI Apps requires is a minimum of version
1.1.1.7.131017 running under Weblogic server 10.3.6.
n out of the box installation of OBIEE gives you version 11.1.1.7.0. You do not have to upgrade to
1.1.1.7.131017 as the patch section of the BI Apps install later on will do this for you.
OBIEE also comes with version 10.3.5 of Weblogic Server, so this need to be upgraded to 10.3.6 and we’ll
o this in the next step.
efore beginning the OBIEE installation we need to create the repositories. Unzip the following file to a
emporary directory (do not confuse this file with the BI Apps RCU zip file)
Oracle Fusion Middleware Repository Creation Utility 11g (11.1.1.7.0) for Li
nux x86-64.zip
rom this directory change to the rcubin directory and run :
./rcu
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
7/82
Click past the welcome screen:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_02.png)
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_02.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
8/82
Choose ‘Create’
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_03.png)
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_03.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
9/82
nter the connection details for the database which will house the repositories:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_04.png)
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_04.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
10/82
fter performing pre-requisite checks enter a prefix (I used BIAPPS) and select ‘Oracle Business
ntelligence’ -> ‘Business Intelligence Platform’:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_05.png)
nter a password for the two schemas:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_05.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
11/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_06.png)
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_06.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
12/82
he tablespaces are small, so the default settings can be left in place:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_07.png)
he tablespaces will then be created. You’ll then get the summary screen confirming the repository
omponents which are about to be installed:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_07.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
13/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_081.png)
he repositories will then be created:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_081.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
14/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_091.png)
Close the RCU.
ow OBIEE can be installed. To start the OBIEE installation unzip all five of the OBIEE zip files to a
emporary directory:
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 1
of 3) (Part 1 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 1
of 3) (Part 2 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 2
of 3) (Part 1 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 2
of 3) (Part 2 of 2)
Oracle Business Intelligence 11g (11.1.1.7.0) for Linux x86 (64-bit) (Disc 3
of 3)
hen from the bishipship/Disk1 subdirectory run:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_091.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
15/82
./runInstaller
kip past the welcome screen:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_10.png)
elect ‘Skip software updates’. OBIEE will be patched up to the correct version later on in the BI Apps
nstallation.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_10.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
16/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_11.png)
lso you must not perform a Simple installation of OBIEE – this will not work with BI Applications. You
must perform an Enterprise installation or a software-only followed by a domain configuration. I’ve chosen
he Enterprise installation so that OBIEE is configured straight away.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_11.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
17/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_12.png)
et the prerequisite checks run. If you get any issues then deal with these before continuing.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_12.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
18/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_13.png)
nter a user-name and password for the BI system admin account. Do not scale out the BI System:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_13.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
19/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_14.png)
pecify a directory for the Middleware home. The other fields will auto-fill with default values beneath this
which I’ve left as is:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_14.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
20/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_15.png)
he BI Apps install guide specifically states that the OBIEE install must include Real-Time decisions and
ssbase Suite. Not 100% sure this entirely necessary – I suspect it depends on whether your installing
modules which use these – not all do. I have included them anyway:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_15.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
21/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_16.png)
ou now need to tell the installer where the BIPLATFORM repository is located – enter the details
ncluding the prefix on the schema name) created with the RCU above:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_16.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
22/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_17.png)
his is then followed by the details of the MDS repository schema – this will probably default to the correct
ettings:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_17.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
23/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_18.png)
ve chosen to leave the ports at the default values (7001 for Weblogic, 9704 for OBIEE) using the Auto-
ort configuration:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_18.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
24/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_19.png)
do not want Oracle emailing me about updates (I get enough of those already…):
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_19.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
25/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_20.png)
Check the installation summary that all is correct. I usually use the ‘save’ button to keep a record of how I
nstalled it:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_20.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
26/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_21.png)
et the installation progress…
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_21.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
27/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_22.png)
ollowed by the configuration…
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_22.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
28/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_23.png)
On the completion screen take a note of the installation details, especially the URLs – use the save button
o save these to a text file. Then close the installer.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_23.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
29/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_24.png)
Quickly check that OBIEE has installed correctly – a browser will launch on closing the installer – login
with the admin user-id (weblogic) created above:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_24.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
30/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_25.png)
Weblogic and OBIEE will need to be stopped and restarted a number of times during the BI Apps
nstallation, so now is a good time to setup a script to do this. Below is the standard script I use.
Create a file called biapps.sh in a suitable directory (e.g. your user home directory), edit it and paste in the
ontents below, altering the top lines with the details of your installation, then make the file runnable
chmod 777 biapps.sh). The script uses a /log directory to keep its logs in.
o stop Weblogic (and OBIEE) run: ./biapps.sh stop
o start Weblogic (and OBIEE) run: ./biapps.sh start
# Start and stop Oracle Business Intelligence 11g components.ORACLE_OWNR=oracle
# Local Unix user running OBIEEORACLE_FMW=/u01/app/biapps
# Deployment Middleware directory
BIEE_DOMAIN=bifoundation_domain # Domain name
BIEE_INSTANCE=instance1 # Instance name
BIEE_SERVER=bi_server1 # Server name
BIEE_MANAGER_URL=biapps_server:7001 # Admin server URL
BIEE_USER=weblogic # Admin user
BIEE_PASSWD=welcome1 # Admin password
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_25.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
31/82
LOG_PATH=/home/oracle/logs # Log directory
WL_PATH=$ORACLE_FMW/wlserver_10.3/server/bin
BIEE_PATH=$ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/bin
ORACLE_INSTANCE=$ORACLE_FMW/instances/$BIEE_INSTANCE
export ORACLE_INSTANCE
ORACLE_HOME=$ORACLE_FMW/Oracle_BI1export ORACLE_HOME
INSTANCE_HOME=$ORACLE_FMW/instances/$BIEE_INSTANCE
export INSTANCE_HOME
WLS_HOME=$ORACLE_FMW/wlserver_10.3
export WLS_HOME
FMW_HOME=$ORACLE_FMW
export FMW_HOME
#create the security file boot.properties
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/AdminServer/securi
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/$BIEE_SERVER/secur
echo username=$BIEE_USER >$ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/serve
echo password=$BIEE_PASSWD >>$ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/se
echo username=$BIEE_USER >$ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/serve
echo password=$BIEE_PASSWD >>$ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/se
NOW=$(date +"%Y%m%d-%H%M")
START_LOG=$LOG_PATH/obiee_start_$NOW.log
STOP_LOG=$LOG_PATH/obiee_stop_$NOW.log
SUBSYS=obiee
start() {
echo "*************************************************************************
echo "Starting Admin Server on $(date)"
echo "*************************************************************************
$BIEE_PATH/startWebLogic.sh &
wait_for "Server started in RUNNING mode"
echo "*************************************************************************
echo "Starting Node Manager on $(date)"echo "*************************************************************************
$WL_PATH/startNodeManager.sh &
wait_for "socket listener started on port"
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
32/82
echo "*************************************************************************
echo "Starting Managed Server $BIEE_SERVER on $(date)"
echo "*************************************************************************
$BIEE_PATH/startManagedWebLogic.sh $BIEE_SERVER http://$BIEE_MANAGER_URL &
wait_for "Server started in RUNNING mode"
echo "*************************************************************************
echo "Starting BI components on $(date)"
echo "*************************************************************************$ORACLE_HOME/opmn/bin/opmnctl startall
$ORACLE_HOME/opmn/bin/opmnctl status
echo "*************************************************************************
echo "OBIEE start sequence completed on $(date)"
echo "*************************************************************************
}
stop() {
echo "*************************************************************************
echo "Stopping BI components on $(date)"
echo "*************************************************************************
$ORACLE_HOME/opmn/bin/opmnctl stopall
echo "*************************************************************************
echo "Stopping Managed Server $BIEE_SERVER on $(date)
echo "*************************************************************************
$BIEE_PATH/stopManagedWebLogic.sh $BIEE_SERVER t3://$BIEE_MANAGER_URL $BIEE_USE
echo "*************************************************************************
echo "Stopping Node Manager on $(date)"
echo "*************************************************************************
pkill -TERM -u $ORACLE_OWNR -f "$ORACLE_FMW/wlserver_10.3/server/lib/weblogic.p
echo "*************************************************************************
echo "Stopping Admin Server on $(date)"
echo "*************************************************************************
$BIEE_PATH/stopWebLogic.sh
echo "*************************************************************************
echo "Cleaning up .lok files"
echo "*************************************************************************
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/edit.lokrm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/config/config.lok
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/bi_server1/data/ld
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/bi_server1/tmp/bi_
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/AdminServer/data/l
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
33/82
rm -f $ORACLE_FMW/user_projects/domains/$BIEE_DOMAIN/servers/AdminServer/tmp/Ad
echo "*************************************************************************
echo "OBIEE stop sequence completed on $(date)"
echo "*************************************************************************
}
wait_for() {
res=0while [[ ! $res -gt 0 ]]
do
res=$(tail -5 "$START_LOG" | fgrep -c "$1")
sleep 5
done
}
case "$1" instart)
echo "*************************************************************************
echo "Starting Oracle Business Intelligence on $(date)"
echo "To view log file: tail -f $START_LOG"
echo "*************************************************************************
start &> $START_LOG &
touch $LOG_PATH/$SUBSYS
;;
stop)
echo "*************************************************************************
echo "Stopping Oracle Business Intelligence on $(date)"
echo "Logs are sent to $STOP_LOG"
echo "*************************************************************************
stop &> $STOP_LOG
rm -f $LOG_PATH/$SUBSYS
;;
status)
echo "*************************************************************************
echo "Oracle BIEE components status...."
echo "*************************************************************************
$ORACLE_HOME/opmn/bin/opmnctl status
;;
stopopmn)
echo "*************************************************************************
echo "Oracle BIEE components status...."
echo "*************************************************************************
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
34/82
$ORACLE_HOME/opmn/bin/opmnctl stopall
;;
startopmn)
echo "*************************************************************************
echo "Oracle BIEE components status...."
echo "*************************************************************************
$ORACLE_HOME/opmn/bin/opmnctl startall
$ORACLE_HOME/opmn/bin/opmnctl status;;
restartopmn)
echo "*************************************************************************
echo "Oracle BIEE components status...."
echo "*************************************************************************
$ORACLE_HOME/opmn/bin/opmnctl stopall
$ORACLE_HOME/opmn/bin/opmnctl startall$ORACLE_HOME/opmn/bin/opmnctl status
;;
restart)
$0 stop
$0 start
;;
*)
echo "Usage: $(basename $0) start|stop|restart|stopopmn|startopmn|restartopmn|s
exit 1
esac
exit 0
UPGRADE WEBLOGIC SERVER TO 10.3.6
I Apps required Weblogic server version 10.3.6.
OBIEE was installed using the enterprise option as above then version of Weblogic server will be 10.3.5,
o it needs to be upgraded. If you performed a “software only” install into an existing Weblogic server
nstallation you need to check the version of Weblogic: open the console, click on Servers, click on
dminServer then look in the Monitoring tab and the Weblogic Version line.
he version in this screen shot needs upgrading to 10.3.6.
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
35/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_26.png)
o upgrade weblogic download the upgrade patch file from oracle support:
atch number 13529623, file = p13529623_1036_Generic.zip
efore upgrading weblogic, shutdown OBIEE and the weblogic processes. Make sure to include stopping
he node manager (the script above does this)
he upgrade patch is a single jar file, called with the java command (using the JDK installed in the OBIEE
ome):
/Oracle_BI1/jdk/bin/java -jar wls1036_upgrade_generic.jar
(http://blog.3sixty-
nalytics.com/wp-content/uploads/2014/05/biapps1_27.png)
his launches the install wizard:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_27.pnghttp://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_26.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
36/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_28.png)
elect the existing Middleware home where OBIEE is installed:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_28.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
37/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_29.png)
he Register for Security updates screen is a little flakey…you can’t uncheck the ‘I wish to receive…’
heck box
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_29.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
38/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_30.png) So if you don’t want these
mails you need to ignore the dire warning messages that appear upon clicking Next then on the next
creen check the ‘I wish to remain uninformed’ check box and click continue and confirm in the warning
ox that appears.
(http://blog.3sixty-
nalytics.com/wp-content/uploads/2014/05/biapps1_31.png)
n the ‘Choose Products and Components’ screen leave the default selections in place:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_31.pnghttp://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_30.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
39/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_32.png)
Confirm the Installation is correct:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_32.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
40/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_33.png)
Wait whilst the upgrade takes place:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_33.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
41/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_34.png)
hen you should get the installation complete screen. Uncheck the ‘Run Quickstart’ option before closing
this just starts a new app for controlling Weblogic which we don’t need.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_34.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
42/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_35.png)
ow restart Weblogic & OBIEE using your start script. A quick check in the console proves the upgrade
ad indeed succeeded:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_36.png)
NSTALL ORACLE DATA INTEGRATOR
he next step is to install Oracle Data Integrator. This needs to be embedded in the same Weblogic server
s OBIEE AND in the same Middleware home are OBIEE so that BI Apps can access it directly. You must
ot install ODI anywhere else or BI Apps will not be able to use it.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_36.pnghttp://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_35.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
43/82
ou must also use the version of ODI from the same download media pack from edelivery – 11.1.1.7.0. You
annot use earlier or later versions. The version does get patched up during the patching process later on,
ut not up to ODI 12c.
rom the BI Apps media pack unzip the following two files into a temporary directory:
Oracle Data Integrator 11g (11.1.1.7.0) (Part 1 of 2).zip
Oracle Data Integrator 11g (11.1.1.7.0) (Part 2 of 2).zip
hen from the Disk1 directory run:
./runInstaller -jreLoc /Oracle_BI1/jdk
.g. ./runInstaller –jreLoc /u01/app/biapps/Oracle_BI1/jdk
f you leave o" the –jreLoc parameter it will prompt you to enter it upon running)
On the welcome screen ignore the message about creating an ODI repository. This will be performed later
when installing BI Apps.
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
44/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_37.png)
We do not want software updates for this installation.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_37.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
45/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_38.png)
elect ODI SDK along with ODI Studio and all of the Java EE Installation options.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_38.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
46/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_39.png)
Confirm the prerequisite checks pass ok:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_39.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
47/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_40.png)
ou must choose the Middleware home where OBIEE is installed.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_40.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
48/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_41.png)
his screen is a little pointless, you can only choose Weblogic Server:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_41.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
49/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_42.png)
Choose ‘Skip Repository Configuration’. The repository will be configured when BI Apps is installed later
n.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_42.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
50/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_43.png)
Confirm the installation details:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_43.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
51/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_44.png)
Wait for the install to run through:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_44.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
52/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_45.png)
he Configuration is automatic and quick:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_45.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
53/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_46.png)
nd finally the installation is complete:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_46.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
54/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_47.png)
t this point we don’t want to do anything with ODI – the software is installed and ready to be configured
or BI Apps later on.
CREATE SCHEMAS FOR ORACLE BI APPLICATIONS
I Apps requires three database schemas to be created:
1. The Data Warehouse schema
2. The BI Applications Repository
3. The BI Apps specific ODI Repository
hese are created using the BI Apps version of the RCU. From the media pack downloaded earlier unzip
he following file into a temporary folder:
Oracle Business Intelligence Applications RCU (11.1.1.8.1) for Linux x86 (64bit).zip
n order to build the data schemas the RCU needs to import some export .dmp files. These are located
nder the directory rcuintegrationbiappsschema in the temporary file you unzipped the above file into.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_47.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
55/82
the databases are installed on a di"erent server to where you are running the RCU (which they are in my
ase) these .dmp files need to be copied (ftp’d) to the database server into a directory with global write
ccess (so that log files can be written to). Take a note of the directory you copy them to; you will be aksed
or this during the repository creation.
his is further complicated by the fact that I am installing the data warehouse on one server, but the
epositories on another. Where you install these is up to you, I have chosen to keep them separate.
here are three .dmp files:
obia_comp.dmp BI Apps repository
obia.dmp Data warehouse
obia_odi.dmp ODI Repository
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_48.png)
o in my case I need to FTP obia.dmp to my data warehouse server and obia_comp.dmp & obia_odi.dmpo my repository server.
his also means that I need to run the Repository Creation Utility twice – once each for both servers.
rom the rcu/bin directory run ./rcu
Click past the welcome screen:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_48.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
56/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_49.png)
elect ‘Create’ and continue.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_49.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
57/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_50.png)
ow we need to enter the database connection details. In this first run of the RCU I’m just going to setup
he data warehouse schema, so I need to enter the details of the data warehouse server:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_50.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
58/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_51.png)
et it check the prerequisites of the database, then it will ask which components to install. Expand ‘Oracle
usiness Intelligence Applications’ and just select ‘Oracle Business Analytics Warehouse’.
fter entering a prefix, BIAPPS in this case, we can see the schema it will create: BIAPPS_DW:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_51.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
59/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_52.png)
ow enter the password for this schema:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_52.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
60/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_53.png)
ou must now enter the name of the directory where the .dmp file (obia.dmp in this case) was copied to on
he database server. You do not need to specify the file name:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_53.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
61/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_54.png)
ow you need to manage the tablespaces for the data warehouse. There are some changes that need to
e made here.
Click on “Manage Tablespaces”
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_54.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
62/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_55.png)
We need to make adjustments to the four new tablespaces about to be created:
BIAPPS_DW_DATA
BIAPPS_DW_IDX
BIAPPS_DW_STG
BIAPPS_DW_TMP
he changes we are about to make are for guidance only, depending on the size you expect your
warehouse to become you may enter di"erent values. Don’t forget of course that once the tablespaces
ave been created they can be amended directly within the database by a DBA.
o start by clicking on the DW_DATA tablespace (BIAPPS_DW_DATA in this case). When its details appear
lick on the file name field (+DATA_DM01 in this case – yours will be di"erent depending on how the
atabase has been configured) and click on the edit (pencil) icon
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_55.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
63/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_56.png)
n the Edit Datafile window change the size to 20GB, ensure autoextend is selected and set the maximum
ze to Unlimited. Then click ok.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_56.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
64/82
(http://blog.3sixty-
nalytics.com/wp-content/uploads/2014/05/biapps1_57.png)
ow click on the DW_IDX tablespace and edit it’s datafile. Leave the size at 5GB, but ensure autoextend is
n and set the maximum size to unlimited:
(http://blog.3sixty-
nalytics.com/wp-content/uploads/2014/05/biapps1_58.png)
hen edit DW_STG. Change the size to 10 GB, ensure Autoextend is on and set the maximum size to
nlimited.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_58.pnghttp://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_57.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
65/82
inally edit DW_TEMP, Change the size to 15 GB, ensure Autoextend is on and set the maximum size to
nlimited:
Click ok to save the tablespace changes.
ack in the Map Tablespaces screen click next to continue.
t this point the tablespaces will be created.
(http://blog.3sixty-
nalytics.com/wp-content/uploads/2014/05/biapps1_59.png)
ou’ll then get the summary screen confirming that schema’s will be created. click Create to start it o".
his make take a little while to run – the DW schema is quite large and the dmp file will be imported into it.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_59.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
66/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_60.png)
nd finally the completion screen should show the creation was successful. Close the RCU.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_60.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
67/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_61.png)
Once complete you’ll be able to directly access the data warehouse objects by connecting with the
IAPPS_DW user-id:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_61.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
68/82
(http://blog.3sixty-analytics.com/wp-
ontent/uploads/2014/05/biapps1_62.png)
ow the RCU needs to be run a second time to create the BI Apps repository and ODI repository.
rom the rcu/bin directory run ./rcu again.
his time in the database connection details screen I entered the details for my repository database.
ow in the “select components” screen we enter the same prefix but select the two repository
omponents: BIACOMP and BIA_ODIREPO:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_62.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
69/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_63.png)
fter entering the passwords, we now enter the directory where we copied the two .dmp files,
bia_comp.dmp & obia_odi.dmp) on the repository database server:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_63.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
70/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_64.png)
here are no specific guidelines on the tablespaces for these two schemas so the defaults can be left in
lace.
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_64.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
71/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_65.png)
Carry on to let the RCU create the schemas:
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_65.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
72/82
http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_66.png)
o that’s it, all the pre-requisite tasks have been performed and everything is ready for BI Apps to be
nstalled. That’ll be in part 2.
njoy!
BI Apps (http://www.redstk.com/category/bi-apps/)
24 comments (http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#comments)
!
"
Previous (http://www.redstk.com/saving-you-15-minutes-12c-database-properties-extensions-and-emcl#
http://www.redstk.com/saving-you-15-minutes-12c-database-properties-extensions-and-emcli/http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#commentshttp://www.redstk.com/category/bi-apps/http://blog.3sixty-analytics.com/wp-content/uploads/2014/05/biapps1_66.png
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
73/82
Next (http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-2-installing-bi-apps/)$
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=501#respond)
chinmay - 30th July 2014
after doing rcu steps for biapps_biacomp user i fired sql statement
select version, status,comp_id from schema_version_registry ;
but it is showing invalid atg on 11.1.1.7.0 beacuse of this atgupgrae is getting failed
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=502#respond)
Romesh (http://blog.3sixty-analytics.com/?p=1221) - 21st August 2014
Hi Paul
when trying to complete step 9 of 15 BI Applications Components Repository even though the schema
exists we are getting the error INST – 08028 ,the schema type BIACM with the name
BIAPPS_BIACOMP does not exist. I have noticed that even though the RCU said it completed with a“Success” and the schema exists in the table schema_version_registry there is no entry. Any help
appreciated,
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=3212#respond)
Bharat Varandani - 1st November 2015
Hi Romesh same error i am getting can you please help me out from this error.
4 comments
oin the conversation
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=3212#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://blog.3sixty-analytics.com/?p=1221http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=502#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=501#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-2-installing-bi-apps/
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
74/82
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=503#respond)
Paul Cannon - 21st August 2014
Hi Romesh – how you doing? it’s been a while…
Don’t know why the schema failed to create, but you’ll need to remove the entry from
schema_registry_version before you can try to re-run the RCU and try again
Paul
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=505#respond)
Romesh - 24th August 2014
Hi Paul
Will be completing a reinstall .
I am good mate are you. Great set of articles . Many thanks.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=504#respond)
Eduardo Montes - 22nd August 2014
Hi Paul.
How could I reset the BI Applications Administrator User password.
I was absolutely sure about the password But I am getting the error message BAD CREDENTIALS
when trying to connect to ODI client
Romesh (http://blog.3sixty-analytics.com/?p=1221) - 27th August 2014
http://blog.3sixty-analytics.com/?p=1221http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=504#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=505#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=503#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
75/82
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=507#respond)
Eduardo u have probably solved this but just in case I ran ODI from the server and connections worked
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=506#respond)
Romesh (http://blog.3sixty-analytics.com/?p=1221) - 27th August 2014
Hi Eduardo
having the same issue, did you find away around this?
Regards
Romesh
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=508#respond)
Reniel M. Argente - 1st September 2014
Thanks for this wonderful blog. This helped me a lot in linux installation though I have encountered a lot
of errors, but this is superb. Thanks!
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=509#respond)
subha - 9th September 2014
Thanks for putting this excellent install tutorial. However when I run the shell script
./biapps.sh start, the start and stop function are getting executed. How do I stop the stop() function?
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=509#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=508#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://blog.3sixty-analytics.com/?p=1221http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=506#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=507#respond
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
76/82
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=510#respond)
Pete - 7th December 2014
There are a few typos in the startup script biapps.sh above. The first few lines should look like:
# Start and stop Oracle Business Intelligence 11g components.
# Local Unix user running OBIEE
ORACLE_OWNR=oracle# Deployment Middleware directory
ORACLE_FMW=/u01/app/oracle/middleware
Look for echo commands that have missing ” at the end of the line. (Lines 68 & 80)
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=514#respond)
J.A. - 10th March 2015
I concur. Spotted same points to update otherwise the script will fail.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=511#respond)
ishwarya - 6th January 2015
What is Spatial Components ? how to Install ?could you please explain tat.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=512#respond)
Nick H. - 14th February 2015
Amazing blog..well done!!
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=512#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=511#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=514#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=510#respond
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
77/82
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=513#respond)
alok - 2nd March 2015
very well written!!
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=515#respond)
Frank - 23rd April 2015
Excellent blog, no flu", real content. Thank you for sharing.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=686#respond)
Dyan - 2nd July 2015
It’s a pity you don’t have a donate button! I’d definitely donate
to this brilliant blog! I suppose for now i’ll settle for bookmarking and adding your RSS feed
to my Google account. I look forward to
brand new updates and will share this site with my
Facebook group. Chat soon!
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=701#respond)
Biofinite - 6th July 2015
Hi, I think your website might be having browser compatibility issues.
When I look at your website in Firefox, it looks fine but when opening in Internet
Explorer, it has some overlapping. I just wanted to give
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=701#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=686#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=515#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=513#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
78/82
you a quick heads up! Other then that, fantastic blog!
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=739#respond)
Raman - 13th July 2015
I have installed Sample App v506 and corresponding VM machine , but when I start up the OBIEE
services using the given scripts …it errors out and says OBIEE web page is not accessible …any idea
why is that happening
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=1231#respond)
san - 5th August 2015
With new website, I am not able to see pictures. Can you please enable them back – this is very nice
blog that I have used earlier.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=1232#respond)
san - 5th August 2015
No worries, it looks like the issue is on my IE. Chrome worked fine. Thanks for this install information –
very good information, very detailed install.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
Sravan Kumar M - 25th August 2015
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=1950#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=1232#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=1231#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=739#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
79/82
replytocom=1950#respond)
Very Good blog to setup BIEE, BIAPPS and ODI using EBS as Data Source.
But the images are not visible. Seems images source location is missing them.
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=3045#respond)
JP - 21st October 2015
Great material. I really like your biapps.sh script. I have a couple of questions.
1. Why are you removing the boot.properties file and regenerating it?
2. Is it possible to run this script without the password or at least not in plain text? I can not have a
password in a file.
(http://www.redstk.com/author/paulcannon/)
reply (/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?
replytocom=3050#respond)
Paul Cannon - 22nd October 2015
JP,
it’s not actually necessary to regenerate the boot.properties file once it’s created the first time, I just
included it in the script for completeness – so the script will work if the boot.properties file does not
exist, you can remove this from the script.
Paul.
Your name * %
Your email * &
Your message'
oin the conversation
http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=3050#respondhttp://www.redstk.com/author/paulcannon/http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=3045#respondhttp://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/?replytocom=1950#respond
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
80/82
Add comment (
Search
)
Categories
**
Recent Posts
Saving You 15 Minutes: Enterprise Manager 13c v’s Enterprise Manager Fusion Middleware Control
12c Part 1 (http://www.redstk.com/saving-you-15-minutes-enterprise-manager-13c-vs-enterprise-
manager-fusion-middleware-control-12c-part-1/)http://www.redstk.com/saving-
you-
15-
minutes-
nterprise-
manager-
13c-
vs-
nterprise-
manager-
usion-
middleware-
ontrol-
12c-
part-
1/)
+
Saving You 15 Minutes: EM13.1 Blog Blitz – ./em13100_.bin Syntax
(http://www.redstk.com/saving-you-15-minutes-em13-1-blog-blitz-em13100_-bin-syntax/)
http://www.redstk.com/saving-
you-
15-
minutes-m13-
1-
blog-
blitz-
m13100_-
bin-
yntax/)
+
Dead Connection Detection in Oracle Database 12c (http://www.redstk.com/dead-connection-
detection-in-oracle-database-12c/)
http://www.redstk.com/dead-onnection-
etection-
in-
racle-
atabase-
2c/)
+
Recent Comments
vetoslav Gyurov on Oracle Exadata X6 released (http://www.redstk.com/oracle-exadata-x6-
eleased/#comment-4498)
ieluigu on Welcome to OBIEE12c: Configuring External LDAP Authentication Part 2
http://www.redstk.com/welcome-to-obiee12c-configuring-external-ldap-authentication-part-2/#comment-493)
nisur rehman on Oracle Exadata X6 released (http://www.redstk.com/oracle-exadata-x6-
eleased/#comment-4459)
Select Category
Search
http://www.redstk.com/oracle-exadata-x6-released/#comment-4459http://www.redstk.com/welcome-to-obiee12c-configuring-external-ldap-authentication-part-2/#comment-4493http://www.redstk.com/oracle-exadata-x6-released/#comment-4498http://www.redstk.com/dead-connection-detection-in-oracle-database-12c/http://www.redstk.com/dead-connection-detection-in-oracle-database-12c/http://www.redstk.com/saving-you-15-minutes-em13-1-blog-blitz-em13100_-bin-syntax/http://www.redstk.com/saving-you-15-minutes-em13-1-blog-blitz-em13100_-bin-syntax/http://www.redstk.com/saving-you-15-minutes-enterprise-manager-13c-vs-enterprise-manager-fusion-middleware-control-12c-part-1/http://www.redstk.com/saving-you-15-minutes-enterprise-manager-13c-vs-enterprise-manager-fusion-middleware-control-12c-part-1/
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
81/82
Archives
**Select Month
JOIN OUR MAILING LIST
Enter your email address
JOIN!
RED STACK TECH
English Polish (http://www.redstk.com/pl/)
QUICK LINKS
ome (http://www.redstk.com/)
bout Us (http://www.redstk.com/about-us/)
ervices (http://www.redstk.com/services/)
usiness Transformation (http://www.redstk.com/business-transformation/)
ngineered Systems (http://www.redstk.com/engineered-systems/)
log (http://www.redstk.com/blog/)
Contact Us (http://www.redstk.com/contact-us/)
http://www.redstk.com/contact-us/http://www.redstk.com/blog/http://www.redstk.com/engineered-systems/http://www.redstk.com/business-transformation/http://www.redstk.com/services/http://www.redstk.com/about-us/http://www.redstk.com/http://www.redstk.com/pl/http://www.redstk.com/installing-bi-apps-11-1-1-8-1-part-1-pre-requisites/#
-
8/18/2019 Installing BI Apps 11.1.1.8.1: Part 1 - Pre-Requisites - Red Stack Tech
82/82
Follow @redstacktech
ATEST TWEET
" Only 9 days until #cluboracle (http://twitter.com/search?q=%23cluboracle). Click the link now to
register if you haven't already: https://t.co/5Bw63tguzL (https://t.co/5Bw63tguzL) "
1 month ago
,
" RT @chrisrsaxon (http://twitter.com/chrisrsaxon): Join us for beer, pizza and SQL magic!
https://t.co/jY9wIniTBR (https://t.co/jY9wIniTBR) "
1 month ago
,
https://t.co/jY9wIniTBRhttp://twitter.com/chrisrsaxonhttps://t.co/5Bw63tguzLhttp://twitter.com/search?q=%23cluboraclehttps://twitter.com/intent/follow?ref_src=twsrc%5Etfw®ion=follow_link&screen_name=redstacktech&tw_p=followbutton