Installer’s Choice and Optional Accessories...6 Step 3-1 Step 3-2 - 3-3 Rubber Gasket Rubber...
Transcript of Installer’s Choice and Optional Accessories...6 Step 3-1 Step 3-2 - 3-3 Rubber Gasket Rubber...
-
For Your Records and Warranty Assistance
Model Name: _____________________
Catalog/Model No.: ________________
Serial No.: ________________________
Date Purchased: ___________________
Where Purchased: _________________
For reference also attach your receipt or a copy of your receipt to the manual.
43113-01•05/04/12
TYPE E Models
-
2
Welcome
Table of Contents
1•GettingReady ...................................................4
2•InstallingtheCeilingPlate ..........................5
3•AssemblingandHangingtheFan ..........6
4•WiringtheFan ..................................................7
5•InstallingtheCanopy ....................................8
6•AssemblingtheBlades .................................9
7•OptionalLightKit ........................................ 10
8•OperatingandCleaning Your Ceiling Fan............................................. 11
9•Troubleshooting ...........................................12
© 2012 Hunter Fan Company
Hunter®FanCompany 43113-01•05/04/12
YournewHunter® ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This installation and operation manual gives you complete instructions for installing and operating your fan.
We are proud of our work. We appreciate the opportunity to supply youwiththebestceilingfanavailableanywhereintheworld.
Beforeinstallingyourfan,foryourrecordsandwarrantyassistance,recordinformationfromthecartonandHunternameplatelabel(located on the top of the fan motor housing).
Cautions and Warnings• READ THIS ENTIRE MANUAL CAREFULLY BEFORE
BEGINNING INSTALLATION. SAVE THESE INSTRUCTIONS.•UseonlyHunterreplacementparts.
•Toreducetheriskofpersonalinjury,attachthefandirectlytothesupportstructureofthebuildingaccordingtotheseinstructions,and use only the hardware supplied.
•Toavoidpossibleelectricalshock,beforeinstallingyourfan,disconnectthepowerbyturningoffthecircuitbreakerstotheoutletboxandassociatedwallswitchlocation.Ifyoucannotlockthecircuitbreakersintheoffposition,securelyfastenaprominentwarningdevice,suchasatag,totheservicepanel.
•AllwiringmustbeinaccordancewithnationalandlocalelectricalcodesandANSI/NFPA70.Ifyouareunfamiliarwithwiring,useaqualified electrician.
•Toreducetheriskofpersonalinjury,donotbendthebladeattachmentsystemwheninstalling,balancing,orcleaningthefan.Neverinsertforeignobjectsbetweenrotatingfanblades.
•Toreducetheriskoffire,electricalshock,ormotordamage,donotuseasolid-statespeedcontrolwiththisfan.UseonlyHunterspeedcontrols.
-
3
Installer’s Choice and Optional Accessories
Understanding Mounting and Installer’s Choice®Hunter’spatented3-positionmountingsystemprovidesyoumaximuminstallationflexibilityandease.YoucaninstallyourHunterfaninoneofthreeways,dependingonceilingheightandyourpreference:LowProfile,Standard,orAnglemounting.ThestepsinthismanualincludeinstructionsforallthreeInstaller’sChoicemountingmethods.
Considering Optional AccessoriesConsiderusingHunter’soptionalaccessories,includingawall-mountedorremotespeedcontrol.Toinstallandusetheaccessories,followthe instructions included with each product. For quiet and optimum performanceofyourHunterfan,useonlyHunterspeedcontrols.
Forceilingshigherthan8feet,youcanpurchaseHunterextensiondownrods.AllHunterfansusesturdy3/4”diameterpipetoassurestabilityandwobble-freeperformance.
Standard Mounting hangs from the ceilingbyadownrod(included).
SupportBrace
Standard Mounting Style
Ceiling OutletBox
Installer’s Choice and Optional Accessories
Understanding Mounting and Installer’s Choice®Hunter’spatented2-positionmountingsystemprovidesyoumaximuminstallationflexibilityandease.YoucaninstallyourHunterfaninoneofthreeways,dependingonceilingheightandyourpreference:LowProfile,Standard,orAnglemounting.ThestepsinthismanualincludeinstructionsforallthreeInstaller’sChoicemountingmethods.
Considering Optional AccessoriesConsiderusingHunter’soptionalaccessories,includingawall-mountedorremotespeedcontrol.Toinstallandusetheaccessories,followthe instructions included with each product. For quiet and optimum performanceofyourHunterfan,useonlyHunterspeedcontrols.
Forceilingshigherthan8feet,youcanpurchaseHunterextensiondownrods.AllHunterfansusesturdy3/4”diameterpipetoassurestabilityandwobble-freeperformance.
SupportBrace
Standard Mounting Style
Ceiling OutletBox
43113-01•05/04/12 Hunter®FanCompany
CAUTION: Toreducetheriskofpersonalinjury,attachthefandirectlytothesupportstructureofthebuildingaccordingtotheseinstructions,anduseonlythehardwaresupplied.
Low Profile Mounting fits close to the ceiling,recommendedforceilingslessthan 9 feet high
LowProfileMounting Style
Ceiling OutletBox
SupportBrace
-
4
1 • Getting Ready
Toinstallaceilingfan,besureyoucandothefollowing:
•Locatetheceilingjoistorothersuitablesupportinceiling.
•Drillholesforandinstallwoodscrews.
• Identifyandconnectelectricalwires.
•Lift40pounds.
Ifyouneedhelpinstallingthefan,yourHunterfandealercandirectyou to a licensed installer or electrician.
Gathering the ToolsYou will need the following tools for installing the fan:
•Electricdrillwith9/64”bit
•Standardscrewdriver(magnetictiprecommended)
•Phillips-headscrewdriver(magnetictiprecommended)
•Wrenchorpliers
•Ladder(heightdependentuponinstallationsite)
Checking Your Fan PartsCarefullyunpackyourfantoavoiddamagetothefanparts.RefertotheincludedPartsGuide.Checkforanyshippingdamagetothemotororfanblades.Ifanypartsaremissingordamaged,contactyourHunterdealerorcallHunterTechnicalSupportDepartmentat888-830-1326.
Preparing the Fan SiteBeforeyoubegininstallingthefan,followalltheinstructionsinthe pullout sheet called “Preparing the Fan Site.” Proper ceiling fan locationandattachmenttothebuildingstructureareessentialforsafety,reliableoperation,maximumefficiency,andenergysavings.
Installing Multiple Fans?Ifyouareinstallingmorethanonefan,keepthefanbladesandbladeirons(ifapplicable)insets,as they were shipped.
Hunter®FanCompany 43113-01•05/04/12
-
5
2 • Installing the Ceiling Plate
CAUTION: Toavoidpossibleelectricalshock,beforeinstallingyourfan,disconnectthepowerbyturningoffthecircuitbreakerstotheoutletboxandassociatedwallswitchlocation.Ifyoucannotlockthecircuitbreakersintheoffposition,securelyfastenaprominentwarningdevice,suchasatag,totheservicepanel.
2-1. Drilloneholeoneachsideofthesupplymainsusingtheholesintheu-bracketasaguide.Thepilotholesshouldbe9/64”indiameter.
2-2. Placethebushingpinassemblyintotheu-bracket.2-3.Screwtheu-bracketscrewsthroughtheu-bracketandintothe
pilot holes.
Step 2-1
Step 2-2
Step 2-3
43113-01•05/04/12 Hunter®FanCompany
-
6
Step 3-1
Step 3-2 - 3-3
RubberGasket
RubberGasket
UpperCanopy
LowerCanopy
Pipe
Decorative SleeveMetal Gasket
3 • Assembling and Hanging the Fan
Hunter®FanCompany 43113-01•05/04/12
Adaptor
WARNING:Fanmayfallifnotassembledasdirectedintheseinstallation instructions.
Standard Mounting - 9’ ceilings or higher:
• Threadingthewiresthroughtheadapter,screwtheadapterontothe shaft on the top of the fan and securely tighten the upper setscrew with the included allen wrench.
• Loosenthelowersetscrewintheadapter.Threadingthewiresthroughthe7”pipe,screwthepipeintotheadapterontopofthefan and securely tighten the upper setscrew.
CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing.Onceassembled,donotremovethedownrod.
•Slidethelowercanopyontothepipewiththelargeopeningfacing the fan.
• Slidethemetalgasketanddecorativesleeveontothepipe(inthatorder).Orientthegasketssothatthesleevewilloverlapthelipofeach gasket.
• Slidetheuppercanopyontothepipewiththelargeopeningfacingawayfromthefan.Thenslidetherubbergasketontothepipe,orientedsothatthelipslidesintothesleeve.Continuetostep 3-1.
Low Profile Mounting - 8’-9’ceilings: Note: For Low Profile Mounting,Adapterisnotused. • Threadingthewiresthroughthe2.75”pipe,screwthepipeinto
the top of the fan and securely tighten the setscrew. • Slidethelowercanopyontothepipewiththelargeopening
facingtheceiling,theuppercanopyisnotusedforlowprofilemounting.
3-1. Screwthehangerbracketontothetopofthepipeatleastthreefullturns.Securelytightenthesetscrewonthehangerbracket.
3-2.Centerthepinintherubberbushing.3-3.Holdingthefanbyboththemotorhousingandthepipe,liftthe
fanassemblyandhookbothsidesofthehangerbracketontothebushingpinassembly.
-
7
fsdfsdf4 • Wiring the Fan
Wire Nut
Single Switch Wiring
Dual Switch Wiring
43113-01•05/04/12 Hunter®FanCompany
All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.Wallswitchesarenotincluded.Selectanacceptablegeneral-useswitchin accordance with national and local electrical codes.
4-1. Beforeattemptinginstallation,makesurethepowerisstilloff.
4-2. Toconnectthewires,holdthebaremetalleadstogetherandplaceawirenutoverthem,thentwistclockwiseuntiltight.Foralltheseconnections use the wire nuts provided.
4-3. Connectthebareorgreengroundwire(grounded)fromtheceiling to the green ground wire (grounded) from the ceiling plate and the green ground wire from the fan.
4-4. Connect the white wire (ungrounded) from the ceiling to the white wire (ungrounded) from the fan.
4-5. Connecttheremainingwiresasfollows:
Dual Switch Wiring: •Theblackwire(ungrounded)fromtheceilingtotheblackwire
(ungrounded) from the fan
•Theblack/whitewire(ungrounded)fromthefantothewire(ungrounded) for the wall switch
Single Switch Wiring: •Theblackwire(ungrounded)fromtheceilingtotheblack(ungrounded)andtheblack/whitewire(ungrounded)fromthe fan
CAUTION:Besurenobarewireorwirestrandsarevisibleaftermaking connections.
4-6. Turnthesplicesupwardandpushthemcarefullybackthroughtheceilingplateintotheoutletbox.
4-7. Spreadthewiresapart,withthegroundedwiresononesideoftheoutletboxandtheungroundedwiresontheothersideoftheoutletbox.
-
8
5 • Installing the Canopy
WARNING:Fanmayfallifnotassembledasdirectedintheseinstallation instructions.
Standard Mounting Note: The lower canopy, along with the sleeve & gaskets, must
be raised first so that the upper canopy can secure to the sleeve.
5-1.Raisethelowercanopy,alongwiththedecorativesleeveandtwogaskets,sothattheloweredgeisevenwiththeupperedgeofthemotor housing. Securely install the setscrews in the lower canopy and metal gasket.
5-2.Raisetheuppercanopy,leaving1-2mmofspacebetweentherimofthecanopyandtheceiling,andsecurelyinstallthesetscrew.
Low Profile Mounting5-3.Raisethecanopy,leaving1-2mmofspacebetweentherimofthe
canopyandtheceiling,andsecurelyinstallthesetscrew.
Step 5-2
Step 5-1
Hunter®FanCompany 43113-01•05/04/12
Step 5-3
-
9
6 • Assembling the Blades
Step 6-1 (Detail)
BladeAssembly ScrewsUsewithgrommet
Usewithoutgrommet
Grommet
BladeMounting
Screw
Steps 6-1 – 6-2
Hunterfansuseseveralstylesoffanbladeirons(bracketsthatholdthebladetothefan).
6-1. Yourfanmayincludebladegrommets.Ifyourfanhasgrommets,insertthembyhandintotheholesontheblades.
6-2. Attacheachbladetoabladeironusingthreebladeassemblyscrews(thecarvedsideshouldfacedownward).Ifyouusedgrommets,thebladesmayappearslightlylooseafterscrewsaretightened. This is normal.
6-3. Foreachblade,insertoneblademountingscrewthroughthebladeiron,andattachlightlytothefan.Insertthesecondblademountingscrew,thensecurelytightenbothmountingscrews.
6-4. Attachthefandangles(included)tothefanpullchainsusingtheplasticbreakawayconnector.(Youmayfindtheplasticbreakawayconnectorontheendoftheextrachain.)
Step 6-3
43113-01•05/04/12 Hunter®FanCompany
-
10
ThisfanwasdesignedtoacceptanyHunterlistedlightkit.Ifyoudecidetoinstallalightkit,followthesestepstoinstalltheincludedlight kit adapter then follow the instructions supplied with the light kit.
7-1.Removethetwoscrewsfromthereversingswitch.7-2.Unscrewthenutontheswitchhousingcover.Youmayneedto
use pliers to loosen the nut.7-3.Removethetwoscrewsintheswitchhousingcoverandremove
the cover.7-4.Installthereversingswitchintothelightkitadapterwiththetwo
screws removed in step 7-1.7-5.Threadthefanpullchainthroughthesideofthelightkitadapter
andsecurewiththenutremovedinstep7-2.7-6.Attachthelightkitadaptertotheupperswitchhousingwiththe
two screws removed in step 7-3. 7-7. Follow the instructions supplied with the accessory light kit to
complete installation of the light kit.
7 • Accessor y Light Option
Step 7-1
Step 7-2
Step 7-6
Hunter®FanCompany 43113-01•05/04/12
-
11
8 • Operating and Cleaning Your Ceiling Fan
In warm weather,usedownward air flow pattern
In cold weather,useupward air flow pattern
8-1. Turn on electrical power to the fan.
8-2. Thefanpullchaincontrolspowertothefan.Thepullchainhasfoursettingsinsequence:High,Medium,LowandOff.• Pullthechainslowlytochangesettings.• Releaseslowlytopreventthechainfromrecoilingintothe
blades.• Thechainusesabreakawayconnectorthatseparatesifthe
chainisjerked.Ifthishappens,simplyreinsertthechainintothe connector.
8-3. Ceilingfansworkbestbyblowingairdownward(counterclockwisebladerotation)inwarmweathertocooltheroomwithadirectbreeze.Inwinter,havingthefandrawairupward(clockwisebladerotation)willdistributethewarmerairtrappedattheceilingaround the room without causing a draft.
8-4. Forcleaningfinishes,useasoftbrushorlint-freeclothtopreventscratching.Avacuumcleanerbrushnozzlecanremoveheavierdust.Removesurfacesmudgesoraccumulateddirtanddustusinga mild detergent and a slightly dampened cloth. You may use anartisticagent,butneverabrasivecleaningagentsastheywilldamage the finish.
8-5. Cleanwoodfinishbladeswithafurniturepolishingcloth.Occasionally,applyalightcoatoffurniturepolishforaddedprotectionandbeauty.Cleanpaintedandhigh-glossbladesinthesame manner as the fan finish.
To Change Airflow DirectionTurnthefanoffandletitcometoacompletestop. Slide the reversing switch on the fan to the oppositeposition.Restartfan.
ReversingSwitch
43113-01•05/04/12 Hunter®FanCompany
-
12
Problem: Nothing happens; fan does not move.1.Turnpoweron,replacefuse,orresetbreaker.2.Loosencanopy,checkallconnectionsaccordingtothewiringthe
fan section.3. Check the plug connection in the switch housing.4. Push motor reversing switch firmly left or right to ensure that the
switch is engaged.5.Pullthepullchaintoensureitison.6.Removetheshippingbumpers.
Problem: Noisy operation.1.Tightenthebladebracketscrewsuntilsnug.2.Checktoseeifthebladeiscracked.Ifso,replacealltheblades.
Problem: Excessive wobbling.1. Ifyourfanwobbleswhenoperating,usetheenclosedbalancingkitandinstructionstobalancethefan.
2.Tightenallbladeironscrews.3.Turnpoweroff,supportfanverycarefully,andcheckthatthehangerballisproperlyseated.
9 • Troubleshooting
Ifyouneedpartsorserviceassistance,pleasecall888-830-1326orvisitusatourwebsiteat http://www.HunterFan.com.
HunterFanCompany2500FriscoAvenueMemphis,Tennessee38114
Hunter®FanCompany 43113-01•05/04/12