Installation – wall
Transcript of Installation – wall
9.10.2018
Installation – wall
Installation instructions for wall panels rectangular and circular (W1)
Step 3
Insert plugs
Step 2
Drill the holes
With absorber plateStep 5A
Push in the absorber plate behind the magnetic discs
Step 1
Mark the drill holes using the drill-hole template
Step 4AWith absorber plate
Insert the spacer tube between the wall and magnetic disc
With absorber plateStep 6A
Place the panels on the magnetic discs
Step 5B
Place the panels on the magnetic discs
Without absorber plateWithout absorber plate
Attach the magnetic discs
Step 4B The installation of small panels (600mmx600mm) is shown as an example.
The installation of other formats (rectangular and circular) with several � xing points is carried out in the same way.
The quantity of absorber plates may vary depending on the panel size.
WOOPIES – acoustic panels made of swisswool