Installation Systems for Ceramic & Stone Tile · PDF fileInstallation Systems for Ceramic &...

5536

50

07

/201

5©

201

5 S

chlu

ter

Sys

tem

s L.

P.

Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-267-1923• Fax: 800-477-9783

[email protected]

www.schluter.com

Floor & Decor Special Order Catalog

Installation Systems for Ceramic & Stone Tile

Effective July 1, 2015

E A S I E R I N S T A L L A T I O N W I T H T H ESchluter® I N T E G R A T E D J O I N T S P A C E R

CONTENTS

Finishing, edge-protection & transition profiles for floors 7 - 20

Finishing & edge-protection profiles for walls & countertops 21 - 51

Stair-nosing profiles 52 - 64

Movement joint & cove-shaped profiles 65 - 84

Waterproofing, uncoupling, & drainage membranesElectric floor warming system

87 - 8889 - 92

Shower system 93 - 110

H =Schluter® IntegratedJoint Spacer

Tile or Stone

www.schluter .com

Customer support: 800-267-1923

1. Select the height of profile (H) according to the tile thickness (ie. 3/8" tile = 3/8" profile).

2. Press the perforated anchoring leg of the profile into the tile adhesive and align. Trowel additional adhesive over the leg.

3. Set the tile flush with the profile. The integrated joint spacer establishes a small, uniform joint (approximately 1/16"), to be filled when grouting.

85 - 86Schluter®-KERDI-BOARD

4 For more information, please call: 800-267-1923

PRODUCT LIST IN ALPHABETICAL ORDER

Schluter®-DECO 13 - 14

Schluter®-DECO-DE 48

Schluter®-DECO-SG 48

Schluter®-DESIGNLINE 47

Schluter®-DILEX-AHK 77 - 79

Schluter®-DILEX-AHKA 80

Schluter®-DILEX-AKWS 70

Schluter®-DILEX-AS 71

Schluter®-DILEX-BT 69

Schluter®-DILEX-BWA 72

Schluter®-DILEX-BWB 67

Schluter®-DILEX-BWS 66

Schluter®-DILEX-EDP 67

Schluter®-DILEX-EHK 83

Schluter®-DILEX-EKE 74

Schluter®-DILEX-EZ 6 + 9 66

Schluter®-DILEX-HK 76

Schluter®-DILEX-HKU 84

Schluter®-DILEX-HKW 75

Schluter®-DILEX-KSA 73 - 74

Schluter®-DILEX-KSN 68 - 69

Schluter®-DILEX-PHK 81 - 82

Schluter®-DITRA 87

Schluter®-DITRA-XL 87

Schluter®-DITRA-HEAT-E 89 - 92

Schluter®-DITRA-ROLLER 110

Schluter®-DITRA-TROWEL 88

Schluter®-ECK-E 49

Schluter®-ECK-K 50

Schluter®-ECK-KI 50

Schluter®-ECK-KHK 51

Schluter®-INDEC 27

Schluter®-JOLLY 11 - 13, 22 - 24

Schluter®-KERDI 93

Schluter®-KERDI-BAND 94

Schluter®-KERDI-BOARD 86

Schluter®-KERDI-BOARD-SN 86 & 101

Schluter®-KERDI-BOARD-ZT/-ZS 86

Schluter®-KERDI-DRAIN 96 - 99

Schluter®-KERDI-FIX 95

Schluter®-KERDI-FLEX 88

Schluter®-KERDI-KERECK-F 94

Schluter®-KERDI-KERS-B 94

Schluter®-KERDI-KERS 95

Schluter®-KERDI-KM 95

Schluter®-KERDI-LINE 105 - 107

Schluter®-KERDI-LINE-FC 110

Schluter®-KERDI-SEAL 95

Schluter®-KERDI-SHOWER-L/-LS 108

Schluter®-KERDI-SHOWER-SB 101

Schluter®-KERDI-SHOWER-SC 100

Schluter®-KERDI-SHOWER-SR 100

Schluter®-KERDI-SHOWER-ST 100

Schluter®-KERDI-SHOWER-KIT 102 - 104

Schluter®-KERDI-TROWEL 93

Schluter®-QUADEC 25 - 26

Schluter®-QUADEC-K 27

Schluter®-QUADEC-FS 28

Schluter®-REMA 48

Schluter®-RENO-RAMP 19

Schluter®-RENO-RAMP-K 19

Schluter®-RENO-T 14

Schluter®-RENO-TK 15 - 16

Schluter®-RENO-U 17 - 18

Schluter®-RENO-V 20

Schluter®-RONDEC 28 - 40

Schluter®-RONDEC-CT 41 - 42

Schluter®-RONDEC-DB 47

Schluter®-RONDEC-STEP 43 - 45 & 53 -55

Schluter®-SCHIENE 8 - 11

Schluter®-SCHIENE-STEP 46 & 56-57

Schluter®-SHOWERPROFILE-R 110

Schluter®-SHOWERPROFILE-S 108

Schluter®-SHOWERPROFILE-WS/-WSK 109

Schluter®-SNIPS 110

Schluter®-TREP-E/-EK 57

Schluter®-TREP-FL 52

Schluter®-TREP-G/GK 58 - 60

Schluter®-TREP-SE/-S/-B 61 - 63

Schluter®-TREP-TAP 64

Schluter®-TROBA 88

Schluter®-TROBA-PLUS 88

5For more information, please call: 800-267-1923

Material

A = AluminumAC = Color-coated aluminumACB = Bright chrome anodized aluminum

AM = Satin brass anodized aluminumAMB = Bright brass anodized aluminumAMG = Polished brass anodized aluminumAMGB = Brushed brass anodized aluminum

AE = Satin anodized aluminumACG = Polished chrome anodized aluminumACGB = Brushed chrome anodized aluminum

AK = Satin copper/bronze anodized aluminumAKB = Bright copper/bronze anodized aluminumAKG = Polished copper/bronze anodized aluminumAKGB = Brushed copper/bronze anodized aluminum

ABGB = Brushed antique bronze anodized aluminum

AGR = Graphite anodized aluminumAGRB = Brushed graphite anodized aluminumAGSG = Bright black anodized aluminum

AGSB = Brushed black anodized aluminum

AT = Satin nickel anodized aluminumATB = Bright nickel anodized aluminumATG = Polished nickel anodized aluminumATGB = Brushed nickel anodized aluminum

TSB = Tuscan beige color-coated aluminumTSOB = Tuscan bronze color-coated aluminumTSG = Tuscan pewter color-coated aluminum

E = Stainless steelEB = Brushed stainless steel

M = Solid brassMC = Chrome-plated solid brass

P = PVC

Symbols

H = Height of tileL = Lengthmil = Thickness in milsmm = Millimetersin. = InchesØ = Diameter

BW Bright whiteRAL 9001

W WhiteRAL 9010

SP Sand pebbleRAL N/A

BH BahamaRAL N/A

HB Light beigeRAL N/A

NB Nut brownRAL N/A

RB Red brownRAL 8003

ZR Brick redRAL 8004

SB Black brownRAL 8019

GS BlackRAL 9011

HG Light greyRAL 7035

PG Classic greyRAL N/A

G GreyRAL 7030

CG YellowRAL 1021

Note: Colors referenced are not available for all products.

L E G E N DC O L O R T A B L E

Stainless Steel: Can withstand high levels of mechanical stress, and is especially suited for areas of application where resistance to chemicals and acids is necessary.

Solid Brass: Can withstand high levels of mechanical stress, making it ideal for transitions subjected to heavy traffic, including exposure to wheel loads (for example: carpet to marble in hotel lobbies or industrial settings). Brass is resistant to most chemicals commonly used in tiled environments. Note: While solid brass is highly resistant to most common chemicals, it will oxidize, resulting in a natural patina. In areas exposed to moisture or aggressive substances, heavy oxidation and spotting may occur. Common brass cleaners can be used to clean the profile.

Mill-finished Aluminum: Provides effective edge protection for residential and light commercial applications where minimum exposure to moisture and chemicals is expected. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline materials, it is important to remove mortar or grout residue from visible surfaces.

Anodized Aluminum: The anodized layer creates a durable finish that retains a uniform appearance over a long period of time. Anodized aluminum provides added protection against the corrosive effects of moisture. Any anodized finish is susceptible to scratching and wear.

Color-coated Aluminum: This pretreated aluminum is color-coated with a polyurethane powder coat. The coating is color-stable, UV-resistant, and suitable for exterior use. Not suitable for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions).

PVC: Moisture resistant. Made of rigid PVC, which resists bending or scratching. It is also UV-resistant, though not permanently color-stable, in exterior applications. Not suited for corners or transitions subjected to heavy mechanical stresses (for example: at step edges or floor transitions).

M A T E R I A L A P P L I C A T I O N S

Material Floor Wall

Stainless SteelSolid BrassMill-finished AluminumAnodized AluminumColor-coated AluminumPVC

Heavy Duty

Light Duty

Chemical Resistance

Moisture Resistance


STAINLESS STEEL, CHROME-PLATED BRASS, AND SOLID BRASS

E Stainless steel 304 (1.4301=V2A) High-grade stainless steel 316 L (1.4404=V4A)

ANODIZED ALUMINUM

Polished and bright anodized aluminum

ACG Polished chromeACB Bright chrome

Brushed anodized aluminum

ACGB Brushed chrome

Satin anodized aluminum

AE Satin

EB Brushed stainless steel MC Chrome-plated solid brass

AMG Polished brass AMB Bright brass

AMGB Brushed brass

AT Satin nickel

AKG Polished copper/bronze

AKB Bright copper/bronze

AKGB Brushed copper/bronze

AK Satin copper/bronze

ATG Polished nickelATB Bright nickel

ATGB Brushed nickel

AM Satin brass

M Solid brass

AGR Graphite

ABGB Brushed antique bronze

AGRB Brushed graphite

AGSG Bright black

AGSB Brushed black

TSB Tuscan beige TSG Tuscan pewterTSOB Tuscan bronze

COLOR-COATED ALUMINUM - TUSCAN INSPIRATIONS


All trims are supplied in 8' 2-1/2" lengths unless otherwise notated in catalog. No minimum required. Please check your electronic catalog system for pricing.

F I N I S H I N G , E D G E - P R O T E C T I O N & T R A N S I T I O N P R O F I L E S F O R F L O O R S

Schluter®-RENO-U Schluter®-RENO-TK

Schluter®-SCHIENE




= H

3/32"

Stainless steel *

Schluter®-SCHIENE

Multiple spacer design

H = 17/32" - 1- 3/16"

1/8"

H = 3/32" - 3/16"H = 1/4" - 1/2"

1/8"

Single spacer design

Schluter®-SCHIENE is a special profile that finishes and protects the edges of tiled surfaces of the same height. However, it can also be used in conjunction with other covering materials and applications. The integrated joint spacer creates a channel for grouting the tile.

(Technical data sheet available at schluter.com)

* The Schluter®-SCHIENE in stainless steel does not have an integrated joint spacer.

Note: The design configuration of Schluter®-SCHIENE is identical to that of Schluter®-JOLLY. However, their materials and finishes do vary. Schluter®-JOLLY is suited primarily for walls and countertops. However JOLLY in AM, AMGB, AK, AT, ATGB and ACGB is also suitable for floors, and may be used in such applications to increase design options. Please refer to page 22.

Finishes: Stainless steel 304(1.4301 = V2A) (E)

Brushed stainless steel 304 (1.4301 = V2A) (EB)

Solid brass (M)

H = tile thickness

Floor & Decor Item No.

Schluter Item No.


Schluter Item No.


Schluter Item No.

3/32 951501670 E20 - - - -1/8 951501724 E30 - - 951501696 M303/16 951501938 E45 - - 951501871 M451/4 951501952 E60 951502079 E60EB 951501916 M609/32 951501970 E70 - - - -5/16 951501981 E80 951502120 E80EB 951501969 M8011/32 951501993 E90 - - 951501980 M903/8 951502007 E100 951502175 E100EB 951501986 M1007/16 951502011 E110 100127109 E110EB 951501992 M1101/2 951502023 E125 951502216 E125EB 951502005 M12517/32 951502054 E140 - - - -9/16 951502183 E150 - - 951502091 M1505/8 951502199 E160 - - 951502097 M16011/16 951502217 E175 - - 951502119 M1753/4 951502258 E200 - - 951502140 M20013/16 - - - - - -7/8 951502294 E225 - - 951502345 M2251 951502341 E250 - - 951502358 M2501-1/16 - - - - - -1-3/16 951502390 E300 - - 951502425 M300

Finishes: Aluminum

(A)Satin anodized aluminum

(AE)

H = tile thickness


Schluter Item No.


Schluter Item No.

3/32 951500698 A20 951500737 AE201/8 951500709 A30 951500812 AE303/16 951500710 A45 951500816 AE451/4 951500716 A60 951500829 AE609/32 951500719 A70 951500903 AE705/16 951500720 A80 951500907 AE8011/32 951500725 A90 951500933 AE903/8 951500729 A100 951500950 AE1007/16 951500730 A110 951500982 AE1101/2 951500732 A125 951501038 AE12517/32 951500735 A140 951501095 AE1409/16 951500791 A150 951501183 AE1505/8 951500815 A160 951501321 AE16011/16 951500830 A175 951501361 AE1753/4 951500906 A200 951501527 AE20013/16 951500921 A210 951501567 AE2107/8 951500942 A225 951501589 AE2251 951500977 A250 951501672 AE2501-1/16 951501041 A275 951501713 AE2751-3/16 951501177 A300 951501815 AE300




Finishes: Bright chrome anod. alu. (ACB)

Bright nickel anod. alu. (ATB)

Bright copper/bronze anod. alu. (AKB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500848 A60ACB 951500846 A60ATB 951500845 A60AKB5/16 951500947 A80ACB 951500944 A80ATB 951500945 A80AKB3/8 951500993 A100ACB 951500994 A100ATB 951500992 A100AKB1/2 951501123 A125ACB 951501121 A125ATB 951501125 A125AKB

Finishes: Bright brass anod. alu. (AMB)

H = tile thickness


Schluter Item No.

1/4 951500847 A60AMB5/16 951500946 A80AMB3/8 951500991 A100AMB1/2 951501122 A125AMB

= H

3/32"

Stainless steel *

Schluter®-SCHIENE

Multiple spacer design

H = 17/32" - 1- 3/16"

1/8"

H = 3/32" - 3/16"H = 1/4" - 1/2"

1/8"

Single spacer design

Schluter®-SCHIENE is a special profile that finishes and protects the edges of tiled surfaces of the same height. However, it can also be used in conjunction with other covering materials and applications. The integrated joint spacer creates a channel for grouting the tile.


* The Schluter®-SCHIENE in stainless steel does not have an integrated joint spacer.




Schluter®-SCHIENE-RADIUSSchluter®-SCHIENE-RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. SCHIENE-RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.


R = Radius



Solid brass (M)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/32 100120021 R/E20 - - - -1/8 100127281 R/E30 - - 100127273 R/M303/16 100119999 R/E45 - - 100119981 R/M451/4 951502074 R/E60 100127240 R/E60EB 951502018 R/M609/32 100120286 R/E70 - - - -5/16 951502105 R/E80 100120351 R/E80EB 951502093 R/M8011/32 100127380 R/E90 - - 100127372 R/M903/8 951502165 R/E100 100120302 R/E100EB 951502112 R/M1007/16 100120179 R/E110 - - 100120161 R/M1101/2 951502189 R/E125 100127182 R/E125EB 951502155 R/M12517/32 100127455 R/E140 - - - -9/16 100120252 R/E150 - - 100120245 R/M1505/8 100120138 R/E160 - - 100120120 R/M16011/16 100127331 R/E175 - - 100127323 R/M1753/4 100120054 R/E200 - - 100120062 R/M20013/16 - - - - - -7/8 100120211 R/E225 - - 100120203 R/M2251 100127141 R/E250 - - 100127133 R/M2501-1/16 - - - - - -1-3/16 100127422 R/E300 - - - -

Finishes: Aluminum

(A)Satin anodized aluminum

(AE)

H = tile thickness


Schluter Item No.


Schluter Item No.

3/32 100120005 R/A20 100120013 R/AE201/8 100127257 R/A30 100127265 R/AE303/16 100119965 R/A45 100119973 R/AE451/4 951500948 R/A60 951501358 R/AE609/32 100120260 R/A70 100120278 R/AE705/16 951500978 R/A80 951501514 R/AE8011/32 100127356 R/A90 100127364 R/AE903/8 951501039 R/A100 951501526 R/AE1007/16 100120146 R/A110 100120153 R/AE1101/2 951501084 R/A125 951501585 R/AE12517/32 100127448 R/A140 100127463 R/AE1409/16 100120229 R/A150 100120237 R/AE1505/8 100120104 R/A160 100120112 R/AE16011/16 100127307 R/A175 100127315 R/AE1753/4 100120039 R/A200 100120047 R/AE20013/16 100127398 R/A210 100127414 R/AE2107/8 100120187 R/A225 100120195 R/AE2251 100127117 R/A250 100127125 R/AE2501-1/16 100127299 R/A275 100127349 R/AE2751-3/16 100127406 R/A300 100127430 R/AE300




Schluter®-SCHIENE-RADIUSSchluter®-SCHIENE-RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. SCHIENE-RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.


R = Radius

Finishes: Bright chrome anod. alu. (ACB)

Bright nickel anod. alu. (ATB)

Bright copper/bronze anod. alu. (AKB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 100127216 R/A60ACB 100127224 R/A60ATB 100127232 R/A60AKB5/16 100120336 R/A80ACB 100120344 R/A80ATB 100120310 R/A80AKB3/8 100120088 R/A100ACB 100120096 R/A100ATB 100120294 R/A100AKB1/2 100127158 R/A125ACB 100127166 R/A125ATB 100127190 R/A125AKB

Finishes: Bright brass anod. alu. (AMB)

H = tile thickness


Schluter Item No.

1/4 100127208 R/A60AMB5/16 100120328 R/A80AMB3/8 100120070 R/A100AMB1/2 100127174 R/A125AMB

Schluter®-JOLLY (Anodized aluminum)The design configuration of Schluter®-SCHIENE is identical to that of Schluter®-JOLLY. However, their materials and finishes do vary. Schluter®-JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ACGB, and ABGB is also suitable for floors, and may be used in such applications to increase design options.


= H

1/8"

Finishes: Brushed chrome anod. alu. (ACGB)

Satin nickel anod. alu. (AT)

Brushed nickel anod. alu. (ATGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501096 A60ACGB 951501002 A60AT 951501330 A60ATGB 5/16 951501172 A80ACGB 951501082 A80AT 951501354 A80ATGB3/8 951501353 A100ACGB 951501120 A100AT 951501375 A100ATGB1/2 951501512 A125ACGB 951501276 A125AT 951501494 A125ATGB




Schluter®-JOLLY (Anodized aluminum)The design configuration of Schluter®-SCHIENE is identical to that of Schluter®-JOLLY. However, their materials and finishes do vary. Schluter®-JOLLY is suited primarily for walls and countertops. However, JOLLY in AM, AMGB, AK, AKGB, AT, ATGB, ACGB, and ABGB is also suitable for floors, and may be used in such applications to increase design options.


= H

1/8"

Finishes: Satin copper/bronze anod. alu. (AK)

Brushed copper/bronze anod. alu. (AKGB)

Brushed antique bronze anod. alu. (ABGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501001 A60AK 951501328 A60AKGB 951501492 A60ABGB5/16 951501083 A80AK 951501355 A80AKGB 951501523 A80ABGB3/8 951501124 A100AK 951501374 A100AKGB 951501583 A100ABGB1/2 951501274 A125AK 951501493 A125AKGB 951501673 A125ABGB

Finishes: Satin brass anod. alu. (AM)

Brushed brass anod. alu. (AMGB)

H = tile thickness


Schluter Item No.


Schluter Item No.

1/4 951500828 A60AM 951501277 A60AMGB5/16 951500844 A80AM 951501319 A80AMGB3/8 951500974 A100AM 951501473 A100AMGB1/2 951501068 A125AM 951501521 A125AMGB

Finishes: Brushed chrome anod. alu. (ACGB)



H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 100119643 R/A60ACGB 100119684 R/A60AT 100119650 R/A60ATGB5/16 100119759 R/A80ACGB 100119791 R/A80AT 100119767 R/A80ATGB3/8 100119692 R/A100ACGB 100050012 R/A100AT 100119700 R/A100ATGB1/2 100119585 R/A125ACGB 100119627 R/A125AT 100119593 R/A125ATGB




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 100119668 R/A60AK 100119817 R/A60AKGB 100119841 R/A60ABGB5/16 100119775 R/A80AK 100119882 R/A80AKGB 100119874 R/A80ABGB3/8 100119718 R/A100AK 100119866 R/A100AKGB 100106798 R/A100ABGB1/2 100119601 R/A125AK 100119833 R/A125AKGB 100053149 R/A125ABGB

Schluter®-JOLLY RADIUSSchluter®-JOLLY RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. JOLLY RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.


R = Radius






H = tile thickness


Schluter Item No.


Schluter Item No.

1/4 100119676 R/A60AM 100119635 R/A60AMGB5/16 100119783 R/A80AM 100119809 R/A80AMGB3/8 100119726 R/A100AM 100119742 R/A100AMGB1/2 100119619 R/A125AM 100119577 R/A125AMGB

Schluter®-JOLLY RADIUSSchluter®-JOLLY RADIUS is an extruded profile with special perforations, for finishing and protecting the edges of curved tile coverings. JOLLY RADIUS provides edge protection while enhancing the aesthetic appearance of a curved design, including curved tile-to-tile transitions and curved outside wall corners, as well as curved designs in other surface coverings. Due to its special perforations, even curves with small radiuses are possible.


R = Radius

Schluter®-DECOSchluter®-DECO has a 1/4"-wide visible surface for creating decorative joint designs in tiled surfaces.


= H

1/4"

Aluminum and MC80D

Schluter®-DECO profiles can be produced with a special perforated anchoring leg to radius the profile:

• Available in all materials except stainless steel. • Call for pricing • For more information, please call Customer Support • Item No.: R / Profile No. (e.g., R/AE80D)

R = Radius

Finishes: Stainless steel 304 (1.4301 = V2A) (E)

Solid brass(M)

Chrome-plated solid brass (MC)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502073 E80D - - 951502633 MC80D11/32 951502090 E90D 100114792 M90D 100114784 MC90D3/8 951502103 E100D - - - -7/16 951502121 E110D 100114818 M110D 100114800 MC110D1/2 951502149 E125D 951502160 M125D 951502644 MC125D17/32 951502166 E140D - - - -5/8 951502192 E160D - - - -23/32 951502230 E185D - - - -13/16 951502260 E210D - - - -1 951502319 E250D - - - -1-3/16 951502359 E300D - - - -

Stainless steel

1/4"

= H

1/4"

= H

Brass




Schluter®-DECOSchluter®-DECO has a 1/4"-wide visible surface for creating decorative joint designs in tiled surfaces.


= H

1/4"

Aluminum and MC80D

Schluter®-RENO-TSchluter®-RENO-T is retrofitted to adjoin different types of floor coverings of the same height.

(Technical data sheet available at schluter.com)Stainless steel

Aluminum, Brass

11/32"

W

11/32"

W

Schluter®-DECO profiles can be produced with a special perforated anchoring leg to radius the profile:

• Available in all materials except stainless steel. • Call for pricing • For more information, please call Customer Support • Item No.: R / Profile No. (e.g., R/AE80D)

R = Radius

Finishes: Satin anodized aluminum (AE)

H = tile thickness


Schluter Item No.

5/16 951501360 AE80D3/8 951501581 AE100D1/2 951501666 AE125D



Satin copper/bronze anod. alu. (AK)

W = in. Floor & Decor Item No.

Schluter Item No.


Schluter Item No.


Schluter Item No.

17/32 951500727 T9/14AE 951500736 T9/14AT 951500734 T9/14AK1 951501042 T9/25AE 951501351 T9/25AT 951501352 T9/25AK



Solid brass (M)


Schluter Item No.


Schluter Item No.


Schluter Item No.

17/32 951501900 T9/14E 951501942 T9/14EB 951501341 T9/14M1 951502113 T9/25E 951502231 T9/25EB 951501990 T9/25M

Stainless steel

1/4"

= H

1/4"

= H

Brass



Schluter Item No.

17/32 951500731 T9/14AM1 951501067 T9/25AM






Solid brass (M)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502228 ETK80 951502435 EBTK80 951502008 MTK803/8 951502321 ETK100 951502461 EBTK100 951502067 MTK1007/16 100126788 ETK110 100126770 EBTK110 - -1/2 951502407 ETK125 951502492 EBTK125 951502376 MTK125


Bright chromeanod. alu. (ACB)

Satin nickelanod. alu. (AT)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500952 AETK60 951501091 ATK60ACB 951501174 ATK60AT5/16 951501043 AETK80 951501176 ATK80ACB 951501327 ATK80AT3/8 951501175 AETK100 951501326 ATK100ACB 951501598 ATK100AT1/2 951501596 AETK125 951501695 ATK125ACB 951501719 ATK125AT

Finishes: Brushed nickelanod. alu. (ATGB)

Satin copper/bronzeanod. alu. (AK)

Brushed copper/bronzeanod. alu. (AKGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 - - 951501173 ATK60AK - -5/16 951501690 ATK80ATGB 951501323 ATK80AK 951501691 ATK80AKGB3/8 951501728 ATK100ATGB 951501599 ATK100AK 951501727 ATK100AKGB1/2 951501978 ATK125ATGB 951501720 ATK125AK 951501976 ATK125AKGB

Aluminum

Schluter®-RENO-TKSchluter®-RENO-TK provides a smooth transition between tiled surfaces and lower neighboring floor coverings. In addition, the edge of the adjacent floor covering is effectively protected.


Stainless steel, Brass Aluminum

1/4"

ADA-Compliant

= 5/16" - 1/2" H = 1/4"1/4"

H = 5/16" - 3/8"1/4"

Aluminum

H = 1/2"

1/4"

Diagram Values

H = in.LB = in.

Aluminum Stainless steel/Brass

1/4 19/64 -5/16 21/64 9/323/8 21/64 7/167/16 - 17/321/2 39/64 21/32

= H1/4"

LB

Finishes: Brushed antique bronze anod. alu. (ABGB)

Bright brass anod. alu. (AMB)

H = tile thickness


Schluter Item No.


Schluter Item No.

1/4 - - 951501092 ATK60AMB5/16 951501689 ATK80ABGB 951501311 ATK80AMB3/8 951200282 ATK100ABGB 951501348 ATK100AMB1/2 951501977 ATK125ABGB 951501698 ATK125AMB




Finishes: Solid brass (M)

Satin anodized aluminum (AE)

Bright chrome anod. alu. (ACB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 - - 100126820 R/AETK60 100126812 R/ATK60ACB5/16 100126986 R/MTK80 100126994 R/AETK80 100126929 R/ATK80ACB3/8 100126887 R/MTK100 100126895 R/AETK100 100126838 R/ATK100ACB

Schluter®-RENO-TK-RADIUSSchluter®-RENO-TK-RADIUS has a special perforated anchoring leg to radius the profile.

AluminumAluminum

H = 1/4"1/4"

H = 5/16" - 3/8"1/4"

R = Radius

H = 5/16" - 1/2"1/4"

Brass

Finishes: Satin nickel anod. alu. (AT)



H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 100126796 R/ATK60AT - - 100127018 R/ATK60AK5/16 100127000 R/ATK80AT 100126952 R/ATK80ATGB 100126978 R/ATK80AK3/8 100126911 R/ATK100AT 100126861 R/ATK100ATGB 100126903 R/ATK100AK

Finishes: Brushed copper/bronze anod. alu. (AKGB)


Bright brass anod. alu. (AMB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 - - - - 100126804 R/ATK60AMB5/16 100126937 R/ATK80AKGB 100126945 R/ATK80ABGB 100126960 R/ATK80AMB3/8 100126853 R/ATK100AKGB 100126846 R/ATK100ABGB 100126879 R/ATK100AMB

ADA-CompliantDiagram Values

H = in.LB = in.


1/4 19/64 -5/16 21/64 9/323/8 21/64 7/16

= H1/4"

LB




ADA-Compliant

Note: Sizes 3/4", 9/16", and 11/16" are not ADA-compliant.

Aluminum

Schluter®-RENO-USchluter®-RENO-U provides a smooth transition between floor coverings of different heights.



= H 5/32"H = 1/8"

5/32"

Aluminum

H = 1/2" - 3/4"5/32"H = 5/16" - 3/8"



Solid brass (M)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502234 EU80 951502506 EBU80 951502293 MU803/8 951502328 EU100 951502538 EBU100 951502398 MU1007/16 100127034 EU110 100127026 EBU110 - -1/2 951502415 EU125 951502587 EBU125 951502490 MU1259/16 951502441 EU150 951502628 EBU150 951502540 MU15011/16 951502468 EU175 951502650 EBU175 - -3/4 951502528 EU200 951502682 EBU200 - -

Diagram Values

H = in.LB = in.


1/8 23/64 -5/16 31/64 33/643/8 21/32 11/167/16 - 49/641/2 55/64 29/329/16 1-5/64 1-7/6411/16 1-1/16 1-5/163/4 1-15/64 1-37/64

= H

5/32"

LB


H = tile thickness


Schluter Item No.

1/8 951500817 AEU355/16 951500976 AEU803/8 951501089 AEU1001/2 951501575 AEU1259/16 951501908 AEU15011/16 951502003 AEU175




Finishes: Bright chromeanod. alu. (ACB)

Satin nickelanod. alu. (AT)

Brushed nickelanod. alu. (ATGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501088 AU80ACB 951501063 AU80AT 951501898 AU80ATGB3/8 951501366 AU100ACB 951501178 AU100AT 951501950 AU100ATGB1/2 951501716 AU125ACB 951501595 AU125AT 951502080 AU125ATGB

Finishes: Satin copper/bronzeanod. alu. (AK)

Brushed copper/bronzeanod. alu. (AKGB)

Brushed antique bronzeanod. alu. (ABGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501062 AU80AK 951501899 AU80AKGB 951501897 AU80ABGB3/8 951501180 AU100AK 951501949 AU100AKGB 951501951 AU100ABGB1/2 951501594 AU125AK 951502082 AU125AKGB 951502081 AU125ABGB

Finishes: Satin brassanod. alu. (AM)

Bright brassanod. alu. (AMB)

H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 951501061 AU80AM 951501090 AU80AMB3/8 951501179 AU100AM 951501367 AU100AMB1/2 951501593 AU125AM 951501717 AU125AMB

Aluminum

Schluter®-RENO-USchluter®-RENO-U provides a smooth transition between floor coverings of different heights.



= H 5/32"H = 1/8"

5/32"

Aluminum

H = 1/2" - 3/4"5/32"H = 5/16" - 3/8"




ADA-Compliant

Note: Sizes 9/16" and 3/4" are not ADA-compliant.

Schluter®-RENO-RAMP/-KSchluter®-RENO-RAMP/-K create a gradual transition between tiled surfaces and lower neighboring floor coverings. Ideal for commercial applications where wheel carts are used, e.g., bakeries, hospitals, etc.

RENO-RAMP has an anchoring leg which is embedded in the tile bond coat.

RENO-RAMP-K is subsequently bonded adjacent to existing floor coverings.


= H

LB

Schluter®-RENO-RAMP

Finish Satin anodized aluminum (AE)

H = tile thickness


Schluter Item No.

B = 2"1/4 100126762 AERP60B50B = 2-1/2"3/8 951200262 AERP100B651/2 951502190 AERP125B65B = 3-1/2"1/2 951502424 AERP125B909/16 951502432 AERP150B903/4 951502447 AERP200B90

Schluter®-RENO-RAMP-K

Finish Satin anodized aluminum (AE)

H = tile thickness


Schluter Item No.

B = 2-1/2"1/2 100052695 AERPK125B65

B= 2-1/2"

= H

= B

Diagram Values

H = in. LB = in.

1/4 2 3/8 2-1/2 1/2 2-1/2 1/2 3-1/2 9/16 3-1/2 3/4 3-1/2

= H

LB




Schluter®-RENO-VSchluter®-RENO-V is a variable transition profile for smoothly joining floor coverings of different heights. The profile consists of two components: the support profile and the variable transition leg.


= B

= H

= H

B = 3/4" or 1-3/16" or 1-9/16"

3/16"

Finishes: Satin anodized aluminum(AE)

Satin brass anodized aluminum (AM)

H = tile thickness


Schluter Item No.


Schluter Item No.

Ramp length B20 - 3/4"5/16 951502298 AEVT80B20 951502324 AVT80B20AM3/8 951502325 AEVT100B20 951502346 AVT100B20AM1/2 951502352 AEVT125B20 951502360 AVT125B20AM9/16 951502370 AEVT150B20 951502391 AVT150B20AM11/16 951502397 AEVT175B20 951502412 AVT175B20AM3/4 951502434 AEVT200B20 951502439 AVT200B20AM

Ramp length B30 - 1-3/16"5/16 951502396 AEVT80B30 951502392 AVT80B30AM3/8 951502413 AEVT100B30 951502414 AVT100B30AM1/2 951502416 AEVT125B30 951502428 AVT125B30AM9/16 951502429 AEVT150B30 951502431 AVT150B30AM11/16 951502433 AEVT175B30 951502440 AVT175B30AM3/4 951502451 AEVT200B30 951502455 AVT200B30AM

Ramp length B40 - 1-9/16"5/16 951502438 AEVT80B40 951502442 AVT80B40AM3/8 951502443 AEVT100B40 951502449 AVT100B40AM1/2 951502450 AEVT125B40 951502452 AVT125B40AM9/16 951502454 AEVT150B40 951502464 AVT150B40AM11/16 951502463 AEVT175B40 951502466 AVT175B40AM3/4 951502500 AEVT200B40 951502505 AVT200B40AM



F I N I S H I N G & E D G E - P R O T E C T I O N P R O F I L E S F O R W A L L S & C O U N T E R T O P S

Schluter®-JOLLY Schluter®-RONDEC-CT

Schluter®-QUADEC




Schluter®-JOLLY (Anodized aluminum & chrome-plated brass)Schluter®-JOLLY finishes and protects outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile. Note: The design configuration of Schluter®-JOLLY is identical to that of Schluter®-SCHIENE. However, their materials and finishes do vary. Schluter®-SCHIENE is suited primarily for floors. However SCHIENE in M, E, EB, and AE is also suitable for walls, and may be used in such applications to increase design options. Please refer to page 8.


= H

1/8"

Finishes: Chrome-plated solid brass (MC) Polished chrome anod. alu. (ACG)

Brushed chrome anod. alu. (ACGB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951502558 MC60 951500975 A60ACG 951501096 A60ACGB5/16 951502576 MC80 951501064 A80ACG 951501172 A80ACGB3/8 951502590 MC100 951501331 A100ACG 951501353 A100ACGB1/2 951502597 MC125 951501472 A125ACG 951501512 A125ACGB


Polished nickel anod. alu. (ATG)


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501002 A60AT 951501520 A60ATG 951501330 A60ATGB 5/16 951501082 A80AT 951501525 A80ATG 951501354 A80ATGB3/8 951501120 A100AT 951501566 A100ATG 951501375 A100ATGB1/2 951501276 A125AT 951501580 A125ATG 951501494 A125ATGB


Polished copper/bronze anod. alu. (AKG)


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501001 A60AK 951501519 A60AKG 951501328 A60AKGB 5/16 951501083 A80AK 951501524 A80AKG 951501355 A80AKGB3/8 951501124 A100AK 951501565 A100AKG 951501374 A100AKGB1/2 951501274 A125AK 951501570 A125AKG 951501493 A125AKGB


Satin brass anod. alu. (AM)

Polished brass anod. alu. (AMG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501492 A60ABGB 951500828 A60AM 951500972 A60AMG 5/16 951501523 A80ABGB 951500844 A80AM 951501065 A80AMG3/8 951501583 A100ABGB 951500974 A100AM 951501329 A100AMG1/2 951501673 A125ABGB 951501068 A125AM 951501474 A125AMG

Note: Schluter®-JOLLY profiles can be produced with a special perforated anchoring leg to radius the profile:

• Available in metal profiles only • Polished aluminum and chrome-plated brass require a relatively large bending radius.• Call for pricing • For more information, please call Customer Support • Item No.: R / Profile No. (e.g., R/A60AT)

R = Radius




Schluter®-JOLLY (Color-coated aluminum & PVC)Schluter®-JOLLY finishes and protects outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.


H = 1/4" - 1/2"

1/8"

COLOR-COATED ALUMINUM

H = 1/8" - 3/16"

H = tile thickness

Bright white White Sand pebble Bahama


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/8 951500916 A30BW 951500919 A30W 951500915 A30SP 951500913 A30BH3/16 951500940 A45BW 951500936 A45W 951500941 A45SP 951500935 A45BH1/4 951500985 A60BW 951500988 A60W 951500986 A60SP 951500979 A60BH5/16 951501006 A80BW 951501012 A80W 951501008 A80SP 951501011 A80BH3/8 951501135 A100BW 951501138 A100W 951501133 A100SP 951501131 A100BH1/2 951501306 A125BW 951501301 A125W 951501307 A125SP 951501299 A125BH

H = tile thickness

Red brown Black brown


Schluter Item No.


Schluter Item No.

5/16 951501004 A80RB 951501013 A80SB3/8 951501140 A100RB 951501139 A100SB1/2 100112192 A125RB 951501302 A125SB

H = tile thickness

Light beige Light grey Classic grey Grey


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/8 951500914 A30HB 951500920 A30HG 951500918 A30PG 951500917 A30G3/16 951500937 A45HB 951500943 A45HG 951500938 A45PG 951500939 A45G1/4 951500981 A60HB 951500980 A60HG 951500983 A60PG 951500984 A60G5/16 951501009 A80HB 951501010 A80HG 951501007 A80PG 951501005 A80G3/8 951501137 A100HB 951501132 A100HG 951501136 A100PG 951501134 A100G1/2 951501303 A125HB 951501300 A125HG 951501304 A125PG 951501305 A125G

Finishes: Brushed brass anod. alu. (AMGB)

Brushed graphite anod. alu. (AGRB)

Bright black anod. alu. (AGSG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 - - - - 951500934 A45AGSG1/4 951501277 A60AMGB 951501491 A60AGRB 951500987 A60AGSG 5/16 951501319 A80AMGB 951501522 A80AGRB 951501003 A80AGSG3/8 951501473 A100AMGB 951501582 A100AGRB 951501141 A100AGSG1/2 951501521 A125AMGB 951501674 A125AGRB 951501298 A125AGSG

Schluter®-JOLLY (Anodized aluminum)

Note: JOLLY in color-coated aluminum is no longer available in Black (GS). For a black finish, the profile is available in Bright black anodized aluminum (AGSG).

Color Codes

HBLightbeige

BWBright white

HGLightgrey

WWhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

RBRed brown

SBBlack brown




Schluter®-JOLLY - PVC

H = tile thickness

Black


Schluter Item No.

3/16 951500527 GS451/4 951500545 GS605/16 951500548 GS803/8 951500565 GS1001/2 951500572 GS125

H = tile thickness

Bright white White Sand pebble Bahama


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951500530 BW45 951500534 W45 951500532 SP45 951500528 BH451/4 951500544 BW60 951500540 W60 951500539 SP60 951500547 BH605/16 951500556 BW80 951500550 W80 951500551 SP80 951500555 BH803/8 951500558 BW100 951500557 W100 951500564 SP100 951500563 BH1001/2 951500566 BW125 951500573 W125 951500569 SP125 951500568 BH125

H = tile thickness

Light beige Light grey Classic grey Grey


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951500529 HB45 951500533 HG45 951500531 PG45 951500535 G451/4 951500541 HB60 951500546 HG60 951500542 PG60 951500543 G605/16 951500549 HB80 951500554 HG80 951500552 PG80 951500553 G803/8 951500559 HB100 951500561 HG100 951500560 PG100 951500562 G1001/2 951500567 HB125 951500570 HG125 951500571 PG125 951500574 G125

Color Codes

HBLightbeige

BWBright white

HGLightgrey

WWhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

GSBlack




Schluter®-QUADECSchluter®-QUADEC is a square profile designed to protect and decorate outside wall corners, tile bases, and other tiled edges, e.g., tiled skirting. QUADEC can also be used as an accent within tile fields on both floors and walls. This profile allows for modern decorative design and interesting contrasts. The integrated joint spacer creates a channel for grouting the tile.Note: Schluter®-QUADEC in stainless steel does not have an inte-grated joint spacer.(Technical data sheet available at schluter.com)

= H

= H

Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.

Inside/outside corner/end cap

Stainless steel

Aluminum

= H

= H

Finishes: Stainless steel (E) Brushed stainless steel (EB) Satin anodized aluminum (AE)

Polished chrome anod. alu. (ACG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 100126671 Q45E - - 951500953 Q45AE 951501359 Q45ACG1/4 951502235 Q60E 951502465 Q60EB 951500989 Q60AE 951501513 Q60ACG5/16 951502320 Q80E 951502510 Q80EB 951501112 Q80AE 951501668 Q80ACG11/32 951502353 Q90E 951502529 Q90EB - - - -3/8 951502383 Q100E 951502547 Q100EB 951501333 Q100AE 951501718 Q100ACG7/16 951502410 Q110E 951502569 Q110EB - - - -1/2 951502426 Q125E 951502588 Q125EB 951501515 Q125AE 951501924 Q125ACG17/32 951502436 Q140E 951502599 Q140EB - - - -9/16 951502446 Q150E 951502618 Q150EB 951501601 Q150AE - -3/4 - - - - 951501697 Q200AE - -

Inside/outside corner 90°/end cap3/16 100126663 EV/Q45E - - 951500658 EV/Q45AE 951500711 EV/Q45ACG1/4 951501996 EV/Q60E 951502167 EV/Q60EB 951500657 EV/Q60AE 951500714 EV/Q60ACG5/16 951502010 EV/Q80E 951502184 EV/Q80EB 951500655 EV/Q80AE 951500712 EV/Q80ACG11/32 951502024 EV/Q90E 951502227 EV/Q90EB - - - -3/8 951502072 EV/Q100E 951502265 EV/Q100EB 951500651 EV/Q100AE 951500715 EV/Q100ACG7/16 951502089 EV/Q110E 951502274 EV/Q110EB - - - -1/2 951502099 EV/Q125E 951502288 EV/Q125EB 951500652 EV/Q125AE 951500713 EV/Q125ACG17/32 951502148 EV/Q140E 951502300 EV/Q140EB - - - -9/16 951502219 EV/Q150E 951502335 EV/Q150EB 951500707 EV/Q150AE - -3/4 - - - - 951500708 EV/Q200AE - -

Connector5/16 951500538 V/RO80E 951500538 V/RO80E 951500336 V/RO80 951500336 V/RO803/8 951500536 V/RO100E 951500536 V/RO100E 951500337 V/RO100 951500337 V/RO1001/2 951500537 V/RO125E 951500537 V/RO125E 951500338 V/RO125 951500338 V/RO125

Connector




Schluter®-QUADECSchluter®-QUADEC is a square profile designed to protect and decorate outside wall corners, tile bases, and other tiled edges, e.g., tiled skirting. QUADEC can also be used as an accent within tile fields on both floors and walls. This profile allows for modern decorative design and interesting contrasts. The integrated joint spacer creates a channel for grouting the tile.Note: Schluter®-QUADEC in stainless steel does not have an inte-grated joint spacer.(Technical data sheet available at schluter.com)

= H

= H

Stainless steel

Aluminum

= H

= H



H = tile thickness


Schluter Item No.


Schluter Item No.

3/16 951501047 Q45AT - -1/4 951501114 Q60AT 951501569 Q60ABGB5/16 951501318 Q80AT 951501586 Q80ABGB3/8 951501356 Q100AT 951501712 Q100ABGB1/2 951501564 Q125AT 951501862 Q125ABGB

Inside/outside corner 90°/end cap3/16 951500659 EV/Q45AT - -1/4 951500650 EV/Q60AT 951500827 EV/Q60ABGB5/16 951500654 EV/Q80AT 951500824 EV/Q80ABGB3/8 951500656 EV/Q100AT 951500825 EV/Q100ABGB1/2 951500653 EV/Q125AT 951500826 EV/Q125ABGB

Connector5/16 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125

Finishes: Tuscan beige color-coated alu. (TSB)

Tuscan bronze color-coated alu. (TSOB)

Tuscan pewter color-coated alu.(TSG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502052 Q80TSB 951502051 Q80TSOB 951502053 Q80TSG3/8 951502088 Q100TSB 951502086 Q100TSOB 951502087 Q100TSG1/2 951502107 Q125TSB 951502106 Q125TSOB 951502108 Q125TSG

Inside/outside corner 90°/end cap5/16 951500843 EV/Q80TSB 951500835 EV/Q80TSOB 951500842 EV/Q80TSG3/8 951500836 EV/Q100TSB 951500841 EV/Q100TSOB 951500840 EV/Q100TSG1/2 951500839 EV/Q125TSB 951500837 EV/Q125TSOB 951500838 EV/Q125TSG

Connector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125


Inside/outside corner/end cap

Connector




Schluter®-QUADEC-KSchluter®-QUADEC-K is a variant of the QUADEC profile without an anchoring leg. It features an open cavity that is filled with thin-set mortar to secure the profile in the assembly. Alternatively, the profile may be installed with an adhesive such as Schluter®-KERDI-FIX. QUADEC-K is installed in wall applications (e.g., wainscotings and bases) with coverings up to 1/2" thick. The profile is particularly suited for finishing edges in retrofit applications, such as thin porcelain panel installation over existing wall tiles. (Technical data sheet available at schluter.com)

1/2"

1/2"





H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/2 100126713 Q125AEK 100060623 Q125ACGK 100126721 Q125ATK 100126705 Q125ABGBKInside/outside corner 90°/end cap

1/2 951500652 EV/Q125AE 951500713 EV/Q125ACG 951500653 EV/Q125AT 951500826 EV/Q125ABGBConnector

1/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125

Inside/outside corner/end cap Connector


Schluter®-INDECSchluter®-INDEC is an anodized aluminum profile for outside corners of tiled surfaces and tiled edges. The reveal of the profile forms a square recessed groove for modern decorative design and interesting contrasts.


ED 90°

Schluter®-INDECFinishes: Satin anodized aluminum

(AE)Outside corner 90º - Cast zinc with AE appearance


Outside corner 90º - Cast zinc with ACG appearance

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 100112168 IN80AE 100112085 ED/IN80AE 100112150 IN80ACG 100112077 ED/IN80ACG3/8 100112143 IN100AE 100112069 ED/IN100AE 100112135 IN100ACG 100112051 ED/IN100ACG7/16 100112184 IN110AE 100112101 ED/IN110AE 100112176 IN110ACG 100112093 ED/IN110ACG1/2 100112127 IN125AE 100112044 ED/IN125AE 100112119 IN125ACG 100112036 ED/IN125ACG

ED 90°




Finishes: Chrome-plated solid brass (MC) Aluminum with polished chrome finish, inside and outside corners 90º

H = tile thickness


SchluterProfile Item No.


Schluter Outside Corner Item No.


Schluter Inside Corner Item No.

1/4 951502753 RO60MC 951500680 EV/RO60ACG 951500669 IV/RO60ACG5/16 951502771 RO80MC 951500694 EV/RO80ACG 951500678 IV/RO80ACG3/8 951502792 RO100MC 951500679 EV/RO100ACG 951500668 IV/RO100ACG1/2 951502843 RO125MC 951500685 EV/RO125ACG 951500675 IV/RO125ACG

= H

Brass

Schluter®-RONDEC (Chrome-plated solid brass)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.


Note: Inside and outside wall corners for the Schluter®-RONDEC (MC) are made of aluminum with a polished chrome finish.

Outside corner Inside corner

Schluter®-QUADEC-FSSchluter®-QUADEC-FS is a double-rail profile that features a recessed section with dovetailed grooves to which field or accent tile is bonded. The profile can be used to produce accents in tile fields on walls, chair rails, and various other decorative applications. The profile is designed to integrate with Schluter®-QUADEC.Note: The same corner piece can be used to produce a 90° inside corner and a 90° outside corner. It can also be used as an end cap.(Technical data sheet available at schluter.com)

= H

2"

2-7/

8"




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501991 QF8/50AE 951502012 QF8/50AT 951502322 QF8/50ABGBInside/outside corner 90°/end cap

5/16 951501563 EV/QF8/50AE 951501562 EV/QF8/50AT 951501893 EV/QF8/50ABGB

Inside/outside corner / End cap (EV/)Finishes: Polished chrome

anod. alu. (ACG)

H = tile thickness


Schluter Item No.

5/16 100126689 QF8/50ACGInside/outside corner 90°/end cap

5/16 100126697 EV/QF8/50ACG




= H

Stainless steel

Schluter®-RONDEC (Stainless steel)Note: The Schluter®-RONDEC in stainless steel does not have an integrated joint spacer.


Note: Outside corners are available in solid stainless steel, or in aluminum with stainless steel appearance. Inside corners are only available in aluminum with stainless steel appearance.

Outside corner

Inside corner

RONDEC sink corners are used with the RONDEC profile to produce tiled-under sinks. The corners have a large radius (3/8" or 1-1/2") that allows them to match the contour of most standard sinks. The 3/8" corner piece features a double-leg design for ease of installation, while the 1-1/2" corner includes two stainless steel connectors to maintain the alignment of the corner piece and profiles during installation.

Sink corner with 3/8" radius

Sink corner with 1-1/2" radius

RONDEC connectors simplify the alignment of adjacent profile sections.

Connector

Finishes: Stainless steel (E) Brushed stainless steel (EB)

H = tile thickness


Schluter Item No.


Schluter Item No.

3/16 951502098 RO45E - -1/4 951502147 RO60E 951502453 RO60EB9/32 951502181 RO70E 951502462 RO70EB5/16 951502221 RO80E 951502467 RO80EB11/32 951502259 RO90E 951502488 RO90EB3/8 951502292 RO100E 951502501 RO100EB7/16 951502326 RO110E 951502508 RO110EB1/2 951502354 RO125E 951502526 RO125EB9/16 951502427 RO150E 951502574 RO150EB

Outside corner 90°, stainless steel3/16 951501894 EV/RO45E - -1/4 951501896 EV/RO60E 951502014 EV/RO60EB 9/32 951501925 EV/RO70E 951502013 EV/RO70EB5/16 951501931 EV/RO80E 951502016 EV/RO80EB11/32 951501984 EV/RO90E 951502015 EV/RO90EB3/8 951501985 EV/RO100E 951502162 EV/RO100EB7/16 951501997 EV/RO110E 951502163 EV/RO110EB1/2 951502004 EV/RO125E 951502164 EV/RO125EB9/16 951502009 EV/RO150E 951502220 EV/RO150EB

Outside corner 90°, aluminum with stainless steel appearance1/4 951500637 ED/RO60E - -5/16 951500626 ED/RO80E - -3/8 951500594 ED/RO100E - -1/2 951500614 ED/RO125E - -

Inside corner 90°, aluminum with stainless steel appearance1/4 951500627 ID/RO60E - -5/16 951500636 ID/RO80E - -3/8 951500611 ID/RO100E - -1/2 951500610 ID/RO125E - -

Sink corner with 3/8" radius, stainless steel5/16 951502302 I2S/RO80E/V2A 951502301 I2S/RO80EB/V2A3/8 951502305 I2S/RO100E/V2A 951502306 I2S/RO100EB/V2A1/2 951502303 I2S/RO125E/V2A 951502304 I2S/RO125EB/V2A

Sink corner with 1-1/2" radius, stainless steel5/16 100127091 ISK/RO80E/38 - -3/8 100127075 ISK/RO100E/38 - -1/2 100127083 ISK/RO125E/38 - -

Connector, stainless steel5/16 951500538 V/RO80E 951500538 V/RO80E3/8 951500536 V/RO100E 951500536 V/RO100E1/2 951500537 V/RO125E 951500537 V/RO125E

End cap5/16 100127067 EK/RO80EB 100127067 EK/RO80EB3/8 100127059 EK/RO100EB 100127059 EK/RO100EB1/2 100127042 EK/RO125EB 100127042 EK/RO125EB

End cap

RONDEC end caps feature a bendable leg that is inserted into the RONDEC profile, and a brushed stainless steel plate that covers the open area of the profile in applications where the end of the profile is to be left exposed.







H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500951 RO60AE 951501322 RO60ACG 951501349 RO60ACGB5/16 951501045 RO80AE 951501517 RO80ACG 951501546 RO80ACGB3/8 951501310 RO100AE 951501669 RO100ACG 951501693 RO100ACGB1/2 951501371 RO125AE 951501864 RO125ACG 951501901 RO125ACGB

= H

Aluminum

Schluter®-RONDEC (Anodized aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.


Outside corner Inside corner Double-leg inside or outside corner Connector

Schluter®-RONDEC double-leg corners simplify the framing of smaller elements with Schluter®-RONDEC, such as niches, windows, etc. The legs are detachable for use in applications where a single-leg corner is needed.




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500623 EV/RO60AE 951500680 EV/RO60ACG 951500746 EV/RO60ACGB5/16 951500605 EV/RO80AE 951500694 EV/RO80ACG 951500752 EV/RO80ACGB3/8 951500622 EV/RO100AE 951500679 EV/RO100ACG 951500745 EV/RO100ACGB1/2 951500598 EV/RO125AE 951500685 EV/RO125ACG 951500784 EV/RO125ACGBInside corner 90°1/4 951500617 IV/RO60AE 951500669 IV/RO60ACG 951500762 IV/RO60ACGB5/16 951500621 IV/RO80AE 951500678 IV/RO80ACG 951500744 IV/RO80ACGB3/8 951500616 IV/RO100AE 951500668 IV/RO100ACG 951500761 IV/RO100ACGB1/2 951500596 IV/RO125AE 951500675 IV/RO125ACG 951500778 IV/RO125ACGBDouble-leg outside corner, 90º5/16 951500891 E2L/RO80AE 951500821 E2L/RO80ACG 951501055 E2L/RO80ACGB3/8 951500890 E2L/RO100AE 951500822 E2L/RO100ACG 951501058 E2L/RO100ACGB1/2 951500889 E2L/RO125AE 951500820 E2L/RO125ACG 951501057 E2L/RO125ACGBDouble-leg inside corner, 90º5/16 951500863 I2L/RO80AE 951500818 I2L/RO80ACG 951501059 I2L/RO80ACGB3/8 951500898 I2L/RO100AE 951500823 I2L/RO100ACG 951501056 I2L/RO100ACGB1/2 951500899 I2L/RO125AE 951500819 I2L/RO125ACG 951501060 I2L/RO125ACGBConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125







H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500973 RO60AT 951501503 RO60ATG 951501548 RO60ATGB5/16 951501066 RO80AT 951501544 RO80ATG 951501680 RO80ATGB3/8 951501275 RO100AT 951501721 RO100ATG 951501818 RO100ATGB1/2 951501369 RO125AT 951501919 RO125ATG 951501936 RO125ATGB

= H

Aluminum








H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500593 EV/RO60AT 951500691 EV/RO60ATG 951500743 EV/RO60ATGB5/16 951500620 EV/RO80AT 951500664 EV/RO80ATG 951500754 EV/RO80ATGB3/8 951500639 EV/RO100AT 951500692 EV/RO100ATG 951500742 EV/RO100ATGB1/2 951500615 EV/RO125AT 951500688 EV/RO125ATG 951500780 EV/RO125ATGBInside corner 90°1/4 951500632 IV/RO60AT 951500677 IV/RO60ATG 951500756 IV/RO60ATGB5/16 951500640 IV/RO80AT 951500693 IV/RO80ATG 951500741 IV/RO80ATGB3/8 951500631 IV/RO100AT 951500674 IV/RO100ATG 951500785 IV/RO100ATGB1/2 951500595 IV/RO125AT 951500667 IV/RO125ATG 951500774 IV/RO125ATGBDouble-leg outside corner, 90º5/16 951500875 E2L/RO80AT 951500886 E2L/RO80ATG 951501153 E2L/RO80ATGB3/8 951500885 E2L/RO100AT 951500877 E2L/RO100ATG 951501147 E2L/RO100ATGB1/2 951500884 E2L/RO125AT 951500876 E2L/RO125ATG 951501152 E2L/RO125ATGBDouble-leg inside corner, 90º5/16 951500870 I2L/RO80AT 951500897 I2L/RO80ATG 951501162 I2L/RO80ATGB3/8 951500868 I2L/RO100AT 951500854 I2L/RO100ATG 951501142 I2L/RO100ATGB1/2 951500867 I2L/RO125AT 951500853 I2L/RO125ATG 951501171 I2L/RO125ATGBConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500623 EV/RO60AE 951500680 EV/RO60ACG 951500746 EV/RO60ACGB5/16 951500605 EV/RO80AE 951500694 EV/RO80ACG 951500752 EV/RO80ACGB3/8 951500622 EV/RO100AE 951500679 EV/RO100ACG 951500745 EV/RO100ACGB1/2 951500598 EV/RO125AE 951500685 EV/RO125ACG 951500784 EV/RO125ACGBInside corner 90°1/4 951500617 IV/RO60AE 951500669 IV/RO60ACG 951500762 IV/RO60ACGB5/16 951500621 IV/RO80AE 951500678 IV/RO80ACG 951500744 IV/RO80ACGB3/8 951500616 IV/RO100AE 951500668 IV/RO100ACG 951500761 IV/RO100ACGB1/2 951500596 IV/RO125AE 951500675 IV/RO125ACG 951500778 IV/RO125ACGBDouble-leg outside corner, 90º5/16 951500891 E2L/RO80AE 951500821 E2L/RO80ACG 951501055 E2L/RO80ACGB3/8 951500890 E2L/RO100AE 951500822 E2L/RO100ACG 951501058 E2L/RO100ACGB1/2 951500889 E2L/RO125AE 951500820 E2L/RO125ACG 951501057 E2L/RO125ACGBDouble-leg inside corner, 90º5/16 951500863 I2L/RO80AE 951500818 I2L/RO80ACG 951501059 I2L/RO80ACGB3/8 951500898 I2L/RO100AE 951500823 I2L/RO100ACG 951501056 I2L/RO100ACGB1/2 951500899 I2L/RO125AE 951500819 I2L/RO125ACG 951501060 I2L/RO125ACGBConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125




= H

Aluminum



Finishes: Satin copper/bronze anod. alu. (AK) Polished copper/bronze anod. alu. (AKG)


H = tile thickness

F & D Item No.

Schluter Item No.

F & D Item No.

Schluter Item No.

F & D Item No.

Schluter Item No.

1/4 951501040 RO60AK 951501502 RO60AKG 951501547 RO60AKGB5/16 951501182 RO80AK 951501542 RO80AKG 951501679 RO80AKGB3/8 951501320 RO100AK 951501714 RO100AKG 951501820 RO100AKGB1/2 951501370 RO125AK 951501921 RO125AKG 951501937 RO125AKGB






H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500630 EV/RO60AK 951500683 EV/RO60AKG 951500771 EV/RO60AKGB5/16 951500638 EV/RO80AK 951500690 EV/RO80AKG 951500751 EV/RO80AKGB3/8 951500629 EV/RO100AK 951500682 EV/RO100AKG 951500770 EV/RO100AKGB1/2 951500612 EV/RO125AK 951500686 EV/RO125AKG 951500782 EV/RO125AKGBInside corner 90°1/4 951500633 IV/RO60AK 951500671 IV/RO60AKG 951500760 IV/RO60AKGB5/16 951500628 IV/RO80AK 951500681 IV/RO80AKG 951500769 IV/RO80AKGB3/8 951500635 IV/RO100AK 951500670 IV/RO100AKG 951500759 IV/RO100AKGB1/2 951500613 IV/RO125AK 951500676 IV/RO125AKG 951500777 IV/RO125AKGBDouble-leg outside corner, 90º5/16 951500880 E2L/RO80AK 951500872 E2L/RO80AKG 951501155 E2L/RO80AKGB3/8 951500895 E2L/RO100AK 951500893 E2L/RO100AKG 951501144 E2L/RO100AKGB1/2 951500894 E2L/RO125AK 951500892 E2L/RO125AKG 951501149 E2L/RO125AKGBDouble-leg inside corner, 90º5/16 951500849 I2L/RO80AK 951500860 I2L/RO80AKG 951501159 I2L/RO80AKGB3/8 951500858 I2L/RO100AK 951500900 I2L/RO100AKG 951501169 I2L/RO100AKGB1/2 951500857 I2L/RO125AK 951500901 I2L/RO125AKG 951501168 I2L/RO125AKGBConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125




= H

Aluminum






H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501540 RO60ABGB 951501044 RO60AM 951501350 RO60AMG5/16 951501683 RO80ABGB 951501324 RO80AM 951501543 RO80AMG3/8 951501817 RO100ABGB 951501518 RO100AM 951501692 RO100AMG1/2 951501935 RO125ABGB 951501694 RO125AM 951501892 RO125AMG






H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500749 EV/RO60ABGB 951500604 EV/RO60AM 951500689 EV/RO60AMG5/16 951500753 EV/RO80ABGB 951500609 EV/RO80AM 951500695 EV/RO80AMG3/8 951500748 EV/RO100ABGB 951500603 EV/RO100AM 951500665 EV/RO100AMG1/2 951500783 EV/RO125ABGB 951500599 EV/RO125AM 951500687 EV/RO125AMGInside corner 90°1/4 951500764 IV/RO60ABGB 951500619 IV/RO60AM 951500673 IV/RO60AMG5/16 951500747 IV/RO80ABGB 951500602 IV/RO80AM 951500684 IV/RO80AMG3/8 951500763 IV/RO100ABGB 951500618 IV/RO100AM 951500672 IV/RO100AMG1/2 951500779 IV/RO125ABGB 951500597 IV/RO125AM 951500666 IV/RO125AMGDouble-leg outside corner, 90º5/16 951501157 E2L/RO80ABGB 951500874 E2L/RO80AM 951500887 E2L/RO80AMG3/8 100040237 E2L/RO100ABGB 951500862 E2L/RO100AM 951500879 E2L/RO100AMG1/2 951501151 E2L/RO125ABGB 951500883 E2L/RO125AM 951500878 E2L/RO125AMGDouble-leg inside corner, 90º5/16 951501161 I2L/RO80ABGB 951500864 I2L/RO80AM 951500851 I2L/RO80AMG3/8 100040245 I2L/RO100ABGB 951500850 I2L/RO100AM 951500856 I2L/RO100AMG1/2 951501165 I2L/RO125ABGB 951500902 I2L/RO125AM 951500855 I2L/RO125AMGConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125




= H

Aluminum




Graphite anod. alu. (AGR)


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501497 RO60AMGB 951501046 RO60AGR 951501504 RO60AGSG5/16 951501592 RO80AMGB 951501181 RO80AGR 951501545 RO80AGSG3/8 951501722 RO100AMGB 951501325 RO100AGR 951501715 RO100AGSG1/2 951501918 RO125AMGB 951501368 RO125AGR 951501920 RO125AGSG




Graphite anod. alu. (AGR)


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°1/4 951500768 EV/RO60AMGB 951500608 EV/RO60AGR 951500706 EV/RO60AGSG5/16 951500750 EV/RO80AMGB 951500634 EV/RO80AGR 951500699 EV/RO80AGSG3/8 951500767 EV/RO100AMGB 951500607 EV/RO100AGR 951500704 EV/RO100AGSG1/2 951500781 EV/RO125AMGB 951500600 EV/RO125AGR 951500701 EV/RO125AGSGInside corner 90°1/4 951500758 IV/RO60AMGB 951500601 IV/RO60AGR 951500702 IV/RO60AGSG5/16 951500766 IV/RO80AMGB 951500606 IV/RO80AGR 951500705 IV/RO80AGSG3/8 951500757 IV/RO100AMGB 951500624 IV/RO100AGR 951500703 IV/RO100AGSG1/2 951500775 IV/RO125AMGB 951500625 IV/RO125AGR 951500700 IV/RO125AGSGDouble-leg outside corner, 90º5/16 951501154 E2L/RO80AMGB 951500873 E2L/RO80AGR 951500896 E2L/RO80AGSG3/8 951501143 E2L/RO100AMGB 951500882 E2L/RO100AGR 951500888 E2L/RO100AGSG1/2 951501148 E2L/RO125AMGB 951500881 E2L/RO125AGR 951500871 E2L/RO125AGSGDouble-leg inside corner, 90º5/16 951501158 I2L/RO80AMGB 951500869 I2L/RO80AGR 951500859 I2L/RO80AGSG3/8 951501164 I2L/RO100AMGB 951500866 I2L/RO100AGR 951500852 I2L/RO100AGSG1/2 951501163 I2L/RO125AMGB 951500865 I2L/RO125AGR 951500861 I2L/RO125AGSGConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125




= H

Aluminum



Finishes: Brushed black anod. alu. (AGSB)

H = tile thickness


Schluter Item No.

1/4 951501541 RO60AGSB5/16 951501678 RO80AGSB3/8 951501819 RO100AGSB1/2 951501923 RO125AGSB



Finishes: Brushed black anod. alu. (AGSB)

H = tile thickness


Schluter Item No.

Outside corner 90°1/4 951500755 EV/RO60AGSB5/16 951500773 EV/RO80AGSB3/8 951500739 EV/RO100AGSB1/2 951500765 EV/RO125AGSBInside corner 90°1/4 951500738 IV/RO60AGSB5/16 951500740 IV/RO80AGSB3/8 951500772 IV/RO100AGSB1/2 951500776 IV/RO125AGSBDouble-leg outside corner, 90º5/16 951501156 E2L/RO80AGSB3/8 951501145 E2L/RO100AGSB1/2 951501150 E2L/RO125AGSBDouble-leg inside corner, 90º5/16 951501160 I2L/RO80AGSB3/8 951501166 I2L/RO100AGSB1/2 951501167 I2L/RO125AGSBConnector5/16 951500336 V/RO803/8 951500337 V/RO1001/2 951500338 V/RO125




= H

Aluminum

Schluter®-RONDEC (Color-coated aluminum)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.




Tuscan pewter color-coated alu. (TSG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502032 RO80TSB 951502031 RO80TSOB 951502033 RO80TSG3/8 951502084 RO100TSB 951502083 RO100TSOB 951502085 RO100TSG1/2 951502101 RO125TSB 951502100 RO125TSOB 951502102 RO125TSG

Outside corner Inside corner Connector




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

Outside corner 90°5/16 951500797 EV/RO80TSB 951500794 EV/RO80TSOB 951500798 EV/RO80TSG3/8 951500811 EV/RO100TSB 951500795 EV/RO100TSOB 951500799 EV/RO100TSG1/2 951500803 EV/RO125TSB 951500804 EV/RO125TSOB 951500801 EV/RO125TSGInside corner 90°5/16 951500810 IV/RO80TSB 951500796 IV/RO80TSOB 951500808 IV/RO80TSG3/8 951500806 IV/RO100TSB 951500807 IV/RO100TSOB 951500805 IV/RO100TSG1/2 951500800 IV/RO125TSB 951500802 IV/RO125TSOB 951500809 IV/RO125TSGConnector5/16 951500336 V/RO80 951500336 V/RO80 951500336 V/RO803/8 951500337 V/RO100 951500337 V/RO100 951500337 V/RO1001/2 951500338 V/RO125 951500338 V/RO125 951500338 V/RO125






H = tile thickness

Bright white White Sand pebble


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501296 RO60BW 951501292 RO60W 951501295 RO60SP5/16 951501483 RO80BW 951501477 RO80W 951501486 RO80SP3/8 951501577 RO100BW 951501579 RO100W 951501578 RO100SP1/2 951501886 RO125BW 951501888 RO125W 951501891 RO125SP

Outside corner 90°1/4 951500478 ED/RO60BW 951500487 ED/RO60W 951500482 ED/RO60SP5/16 951500488 ED/RO80BW 951500496 ED/RO80W 951500490 ED/RO80SP3/8 951500455 ED/RO100BW 951500460 ED/RO100W 951500457 ED/RO100SP1/2 951500446 ED/RO125BW 951500451 ED/RO125W 951500448 ED/RO125SP

Inside corner 90°1/4 951500464 ID/RO60BW 951500476 ID/RO60W 951500468 ID/RO60SP5/16 951500477 ID/RO80BW 951500486 ID/RO80W 951500481 ID/RO80SP3/8 951500463 ID/RO100BW 951500475 ID/RO100W 951500467 ID/RO100SP1/2 951500439 ID/RO125BW 951500445 ID/RO125W 951500441 ID/RO125SP

H = tile thickness

Bahama Light beige Light grey


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501289 RO60BH 951501293 RO60HB 951501294 RO60HG5/16 951501482 RO80BH 951501476 RO80HB 951501484 RO80HG3/8 951501572 RO100BH 951501576 RO100HB 951501571 RO100HG1/2 951501887 RO125BH 951501885 RO125HB 951501884 RO125HGOutside corner 90°1/4 951500497 ED/RO60BH 951500494 ED/RO60HB 951500484 ED/RO60HG5/16 951500492 ED/RO80BH 951500436 ED/RO80HB 951500491 ED/RO80HG3/8 951500485 ED/RO100BH 951500458 ED/RO100HB 951500459 ED/RO100HG1/2 951500453 ED/RO125BH 951500449 ED/RO125HB 951500450 ED/RO125HGInside corner 90°1/4 951500499 ID/RO60BH 951500472 ID/RO60HB 951500474 ID/RO60HG5/16 951500500 ID/RO80BH 951500493 ID/RO80HB 951500495 ID/RO80HG3/8 951500498 ID/RO100BH 951500471 ID/RO100HB 951500473 ID/RO100HG1/2 951500452 ID/RO125BH 951500443 ID/RO125HB 951500444 ID/RO125HG

= H

Aluminum

Color Codes

HBLightbeige

BWBright white

HGLightgrey

Wwhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

Note: For aluminum profiles in black finish please see pages 34-35.

Outside corner

Inside corner




Color Codes

HBLightbeige

BWBright white

HGLightgrey

Wwhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

Note: For aluminum profiles in black finish please see pages 34-35.

Outside corner

Inside corner

H = tile thickness

Classic grey Grey


Schluter Item No.


Schluter Item No.

1/4 951501291 RO60PG 951501290 RO60G5/16 951501490 RO80PG 951501485 RO80G3/8 951501573 RO100PG 951501574 RO100G1/2 951501890 RO125PG 951501889 RO125GOutside corner 90°1/4 951500480 ED/RO60PG 951500470 ED/RO60G5/16 951500489 ED/RO80PG 951500483 ED/RO80G3/8 951500456 ED/RO100PG 951500454 ED/RO100G1/2 951500447 ED/RO125PG 951500442 ED/RO125GInside corner 90°1/4 951500466 ID/RO60PG 951500462 ID/RO60G5/16 951500479 ID/RO80PG 951500469 ID/RO80G3/8 951500465 ID/RO100PG 951500461 ID/RO100G1/2 951500440 ID/RO125PG 951500438 ID/RO125G



= H

Aluminum




= H

PVC

Schluter®-RONDEC (PVC)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.


H = tile thickness

Bright white White Sand pebble


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500576 PRO60BW 951500579 PRO60W 951500580 PRO60SP5/16 951500592 PRO80BW 951500586 PRO80W 951500589 PRO80SP3/8 951500648 PRO100BW 951500643 PRO100W 951500645 PRO100SPOutside corner 90°1/4 951500355 E/PRO60BW 951500349 E/PRO60W 951500361 E/PRO60SP5/16 951500350 E/PRO80BW 951500343 E/PRO80W 951500352 E/PRO80SP3/8 951500354 E/PRO100BW 951500348 E/PRO100W 951500360 E/PRO100SPInside corner 90°1/4 951500383 I/PRO60BW 951500389 I/PRO60W 951500373 I/PRO60SP5/16 951500390 I/PRO80BW 951500347 I/PRO80W 951500359 I/PRO80SP3/8 951500382 I/PRO100BW 951500388 I/PRO100W 951500372 I/PRO100SP

H = tile thickness

Bahama Light beige Light grey


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500582 PRO60BH 951500575 PRO60HB 951500577 PRO60HG5/16 951500591 PRO80BH 951500590 PRO80HB 951500587 PRO80HG3/8 951500649 PRO100BH 951500642 PRO100HB 951500641 PRO100HGOutside corner 90°1/4 951500346 E/PRO60BH 951500366 E/PRO60HB 951500369 E/PRO60HG5/16 951500341 E/PRO80BH 951500393 E/PRO80HB 951500344 E/PRO80HG3/8 951500345 E/PRO100BH 951500365 E/PRO100HB 951500368 E/PRO100HGInside corner 90°1/4 951500340 I/PRO60BH 951500385 I/PRO60HB 951500387 I/PRO60HG5/16 951500370 I/PRO80BH 951500364 I/PRO80HB 951500367 I/PRO80HG3/8 951500342 I/PRO100BH 951500379 I/PRO100HB 951500386 I/PRO100HG

Color Codes

HBLightbeige

BWBright white

HGLightgrey

Wwhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

GSBlack

Outside corner

Inside corner




Color Codes

HBLightbeige

BWBright white

HGLightgrey

Wwhite

PGClassicgrey

SPSandpebble

GGrey

BHBahama

GSBlack

Outside corner

Inside corner

H = tile thickness

Classic grey Grey Black


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951500583 PRO60PG 951500578 PRO60G 951500581 PRO60GS5/16 951500588 PRO80PG 951500585 PRO80G 951500584 PRO80GS3/8 951500647 PRO100PG 951500646 PRO100G 951500644 PRO100GSOutside corner 90°1/4 951500358 E/PRO60PG 951500378 E/PRO60G 951500362 E/PRO60GS5/16 951500351 E/PRO80PG 951500363 E/PRO80G 951500353 E/PRO80GS3/8 951500357 E/PRO100PG 951500377 E/PRO100G 951500392 E/PRO100GSInside corner 90°1/4 951500371 I/PRO60PG 951500381 I/PRO60G 951500375 I/PRO60GS5/16 951500356 I/PRO80PG 951500376 I/PRO80G 951500391 I/PRO80GS3/8 951500384 I/PRO100PG 951500380 I/PRO100G 951500374 I/PRO100GS

= H

PVC

Schluter®-RONDEC (PVC)Schluter®-RONDEC is a symmetrically rounded profile designed to protect and decorate outside wall corners and other tiled edges, e.g., tiled skirting. The integrated joint spacer creates a channel for grouting the tile.





A = 1-1/2"

= H

= H1-1/4"

Schluter®-RONDEC-CTSchluter®-RONDEC-CT is a double-rail edging profile for countertops that have been fitted with a ceramic or dimensional stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded.





H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502239 RC80AE39 951502361 RC80ACGB39 951502342 RC80AT39 3/8 951502264 RC100AE39 951502369 RC100ACGB39 951502356 RC100AT391/2 951502318 RC125AE39 951502400 RC125ACGB39 951502388 RC125AT39Outside corner 90°5/16 951501626 E90RC80AE39 951501775 E90RC80ACGB39 951501628 E90RC80AT39 3/8 951501621 E90RC100AE39 951501753 E90RC100ACGB39 951501625 E90RC100AT391/2 951501612 E90RC125AE39 951501767 E90RC125ACGB39 951501614 E90RC125AT39Outside corner 135°5/16 951501644 E135RC80AE39 951501807 E135RC80ACGB39 951501652 E135RC80AT39 3/8 951501646 E135RC100AE39 951501810 E135RC100ACGB39 951501650 E135RC100AT391/2 951501645 E135RC125AE39 951501744 E135RC125ACGB39 951501649 E135RC125AT39Inside corner 90°5/16 951501639 I90RC80AE39 951501803 I90RC80ACGB39 951501643 I90RC80AT39 3/8 951501609 I90RC100AE39 951501763 I90RC100ACGB39 951501611 I90RC100AT391/2 951501605 I90RC125AE39 951501759 I90RC125ACGB39 951501607 I90RC125AT39Inside corner 135°5/16 951501663 I135RC80AE39 951501796 I135RC80ACGB39 951501664 I135RC80AT39 3/8 951501638 I135RC100AE39 951501800 I135RC100ACGB39 951501642 I135RC100AT391/2 951501620 I135RC125AE39 951501752 I135RC125ACGB39 951501624 I135RC125AT39

Finishes: Brushed nickel anod. alu. (ATGB)



H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502409 RC80ATGB39 951502343 RC80AK39 951502408 RC80AKGB39 3/8 951502421 RC100ATGB39 951502357 RC100AK39 951502420 RC100AKGB391/2 951502423 RC125ATGB39 951502389 RC125AK39 951502422 RC125AKGB39Outside corner 90°5/16 951501777 E90RC80ATGB39 951501629 E90RC80AK39 951501776 E90RC80AKGB39 3/8 951501757 E90RC100ATGB39 951501602 E90RC100AK39 951501755 E90RC100AKGB391/2 951501769 E90RC125ATGB39 951501616 E90RC125AK39 951501768 E90RC125AKGB39Outside corner 135°5/16 951501809 E135RC80ATGB39 951501658 E135RC80AK39 951501808 E135RC80AKGB39 3/8 951501814 E135RC100ATGB39 951501653 E135RC100AK39 951501812 E135RC100AKGB391/2 951501813 E135RC125ATGB39 951501654 E135RC125AK39 951501811 E135RC125AKGB39Inside corner 90°5/16 951501804 I90RC80ATGB39 951501656 I90RC80AK39 951501802 I90RC80AKGB39 3/8 951501765 I90RC100ATGB39 951501615 I90RC100AK39 951501764 I90RC100AKGB391/2 951501761 I90RC125ATGB39 951501608 I90RC125AK39 951501760 I90RC125AKGB39Inside corner 135°5/16 951501730 I135RC80ATGB39 951501603 I135RC80AK39 951501731 I135RC80AKGB39 3/8 951501805 I135RC100ATGB39 951501655 I135RC100AK39 951501801 I135RC100AKGB391/2 951501756 I135RC125ATGB39 951501630 I135RC125AK39 951501754 I135RC125AKGB39




Outside corner

Inside corner




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502477 RC80TSB39 951502470 RC80TSOB39 951502476 RC80TSG39 3/8 951502504 RC100TSB39 951502502 RC100TSOB39 951502503 RC100TSG391/2 951502525 RC125TSB39 951502523 RC125TSOB39 951502524 RC125TSG39Outside corner 90°5/16 951501826 E90RC80TSB39 951501858 E90RC80TSOB39 951501846 E90RC80TSG39 3/8 951501842 E90RC100TSB39 951501851 E90RC100TSOB39 951501832 E90RC100TSG391/2 951501841 E90RC125TSB39 951501850 E90RC125TSOB39 951501831 E90RC125TSG39Outside corner 135°5/16 951501823 E135RC80TSB39 951501855 E135RC80TSOB39 951501825 E135RC80TSG39 3/8 951501854 E135RC100TSB39 951501857 E135RC100TSOB39 951501845 E135RC100TSG391/2 951501853 E135RC125TSB39 951501824 E135RC125TSOB39 951501844 E135RC125TSG39Inside corner 90°5/16 951501840 I90RC80TSB39 951501849 I90RC80TSOB39 951501830 I90RC80TSG39 3/8 951501827 I90RC100TSB39 951501834 I90RC100TSOB39 951501837 I90RC100TSG391/2 951501838 I90RC125TSB39 951501833 I90RC125TSOB39 951501836 I90RC125TSG39Inside corner 135°5/16 951501852 I135RC80TSB39 951501856 I135RC80TSOB39 951501843 I135RC80TSG39 3/8 951501839 I135RC100TSB39 951501848 I135RC100TSOB39 951501829 I135RC100TSG391/2 951501835 I135RC125TSB39 951501847 I135RC125TSOB39 951501828 I135RC125TSG39



H = tile thickness


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502273 RC80AM39 951502362 RC80AMGB39 3/8 951502299 RC100AM39 951502368 RC100AMGB391/2 951502344 RC125AM39 951502399 RC125AMGB39Outside corner 90°5/16 951501627 E90RC80AM39 951501774 E90RC80AMGB39 3/8 951501623 E90RC100AM39 951501751 E90RC100AMGB391/2 951501613 E90RC125AM39 951501766 E90RC125AMGB39Outside corner 135°5/16 951501651 E135RC80AM39 951501806 E135RC80AMGB39 3/8 951501648 E135RC100AM39 951501743 E135RC100AMGB391/2 951501647 E135RC125AM39 951501742 E135RC125AMGB39Inside corner 90°5/16 951501641 I90RC80AM39 951501799 I90RC80AMGB39 3/8 951501610 I90RC100AM39 951501762 I90RC100AMGB391/2 951501606 I90RC125AM39 951501758 I90RC125AMGB39Inside corner 135°5/16 951501604 I135RC80AM39 951501797 I135RC80AMGB39 3/8 951501640 I135RC100AM39 951501798 I135RC100AMGB391/2 951501622 I135RC125AM39 951501750 I135RC125AMGB39

A = 1-1/2"

= H

= H1-1/4"

Schluter®-RONDEC-CTSchluter®-RONDEC-CT is a double-rail edging profile for countertops that have been fitted with a ceramic or dimensional stone tile covering. The face of the profile features a recessed section with dovetailed grooves to which field or accent tile is bonded.





Schluter®-RONDEC-STEPSchluter®-RONDEC-STEP is an edging profile for countertops or stairs that have been fitted with a ceramic or stone tile covering.


= H

A = 1-1/2" or 2-1/4"

Finishes: Satin anod. alu. (AE)



H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502094 RS80AE39 951502365 RS80ACGB39 951502095 RS80AT39 3/8 951502109 RS100AE39 951502379 RS100ACGB39 951502111 RS100AT391/2 951502157 RS125AE39 951502405 RS125ACGB39 951502159 RS125AT39Outside corner 90°5/16 951501249 E90RS80AE39 951501378 E90RS80ACGB39 951501262 E90RS80AT39 3/8 951501210 E90RS100AE39 951501405 E90RS100ACGB39 951501222 E90RS100AT391/2 951501193 E90RS125AE39 951501390 E90RS125ACGB39 951501201 E90RS125AT39Outside corner 135°5/16 951501244 E135RS80AE39 951501457 E135RS80ACGB39 951501259 E135RS80AT39 3/8 951501247 E135RS100AE39 951501447 E135RS100ACGB39 951501263 E135RS100AT391/2 951501215 E135RS125AE39 951501435 E135RS125ACGB39 951501233 E135RS125AT39Inside corner 90°5/16 951501243 I90RS80AE39 951501456 I90RS80ACGB39 951501257 I90RS80AT39 3/8 951501261 I90RS100AE39 951501466 I90RS100ACGB39 951501245 I90RS100AT391/2 951501236 I90RS125AE39 951501417 I90RS125ACGB39 951501213 I90RS125AT39Inside corner 135°5/16 951501248 I135RS80AE39 951501469 I135RS80ACGB39 951501265 I135RS80AT39 3/8 951501242 I135RS100AE39 951501455 I135RS100ACGB39 951501256 I135RS100AT391/2 951501241 I135RS125AE39 951501429 I135RS125ACGB39 951501255 I135RS125AT39

A = 2-1/4"5/16 951502122 RS80AE57 951502386 RS80ACGB57 951502123 RS80AT573/8 951502144 RS100AE57 951502395 RS100ACGB57 951502145 RS100AT571/2 951502188 RS125AE57 951502417 RS125ACGB57 951502185 RS125AT57Outside corner 90°5/16 951501197 E90RS80AE57 951501400 E90RS80ACGB57 951501205 E90RS80AT573/8 951501189 E90RS100AE57 951501385 E90RS100ACGB57 951501191 E90RS100AT571/2 951501185 E90RS125AE57 951501383 E90RS125ACGB57 951501187 E90RS125AT57Outside corner 135°5/16 951501229 E135RS80AE57 951501426 E135RS80ACGB57 951501231 E135RS80AT573/8 951501246 E135RS100AE57 951501446 E135RS100ACGB57 951501254 E135RS100AT571/2 951501196 E135RS125AE57 951501397 E135RS125ACGB57 951501200 E135RS125AT57Inside corner 90°5/16 951501211 I90RS80AE57 951501404 I90RS80ACGB57 951501225 I90RS80AT573/8 951501235 I90RS100AE57 951501416 I90RS100ACGB57 951501214 I90RS100AT571/2 951501206 I90RS125AE57 951501394 I90RS125ACGB57 951501195 I90RS125AT57Inside corner 135°5/16 951501216 I135RS80AE57 951501439 I135RS80ACGB57 951501234 I135RS80AT573/8 951501209 I135RS100AE57 951501403 I135RS100ACGB57 951501224 I135RS100AT571/2 951501208 I135RS125AE57 951501423 I135RS125ACGB57 951501223 I135RS125AT57







H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502096 RS80AK39 951502364 RS80AKGB39 951502367 RS80AMGB393/8 951502110 RS100AK39 951502378 RS100AKGB39 951502380 RS100AMGB391/2 951502158 RS125AK39 951502403 RS125AKGB39 951502404 RS125AMGB39Outside corner 90°5/16 951501253 E90RS80AK39 951501377 E90RS80AKGB39 951501379 E90RS80AMGB393/8 951501239 E90RS100AK39 951501408 E90RS100AKGB39 951501402 E90RS100AMGB391/2 951501207 E90RS125AK39 951501391 E90RS125AKGB39 951501389 E90RS125AMGB39Outside corner 135°5/16 951501260 E135RS80AK39 951501460 E135RS80AKGB39 951501454 E135RS80AMGB393/8 951501251 E135RS100AK39 951501467 E135RS100AKGB39 951501445 E135RS100AMGB391/2 951501217 E135RS125AK39 951501436 E135RS125AKGB39 951501434 E135RS125AMGB39Inside corner 90°5/16 951501184 I90RS80AK39 951501459 I90RS80AKGB39 951501453 I90RS80AMGB393/8 951501258 I90RS100AK39 951501432 I90RS100AKGB39 951501465 I90RS100AMGB391/2 951501228 I90RS125AK39 951501419 I90RS125AKGB39 951501415 I90RS125AMGB39Inside corner 135°5/16 951501252 I135RS80AK39 951501470 I135RS80AKGB39 951501468 I135RS80AMGB393/8 951501267 I135RS100AK39 951501458 I135RS100AKGB39 951501452 I135RS100AMGB391/2 951501266 I135RS125AK39 951501430 I135RS125AKGB39 951501428 I135RS125AMGB39




= H

A = 1-1/2" or 2-1/4"




Outside corner (90º or 135º)

Inside corner (90º or 135º)


H = tile thickness


Schluter Item No.

A = 2-1/4"5/16 951502124 RS80AM573/8 951502146 RS100AM571/2 951502186 RS125AM57Outside corner 90°5/16 951501204 E90RS80AM573/8 951501190 E90RS100AM571/2 951501186 E90RS125AM57Outside corner 135°5/16 951501227 E135RS80AM573/8 951501264 E135RS100AM571/2 951501203 E135RS125AM57Inside corner 90°5/16 951501221 I90RS80AM573/8 951501212 I90RS100AM571/2 951501194 I90RS125AM57Inside corner 135°5/16 951501232 I135RS80AM573/8 951501220 I135RS100AM571/2 951501219 I135RS125AM57



H = tile thickness


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502363 RS80ATGB39 951502366 RS80ABGB393/8 951502377 RS100ATGB39 951502381 RS100ABGB391/2 951502402 RS125ATGB39 951502406 RS125ABGB39Outside corner 90°5/16 951501376 E90RS80ATGB39 951501443 E90RS80ABGB393/8 951501409 E90RS100ATGB39 951501411 E90RS100ABGB391/2 951501392 E90RS125ATGB39 951501388 E90RS125ABGB39Outside corner 135°5/16 951501463 E135RS80ATGB39 951501451 E135RS80ABGB393/8 951501380 E135RS100ATGB39 951501442 E135RS100ABGB391/2 951501437 E135RS125ATGB39 951501433 E135RS125ABGB39Inside corner 90°5/16 951501462 I90RS80ATGB39 951501450 I90RS80ABGB393/8 951501440 I90RS100ATGB39 951501464 I90RS100ABGB391/2 951501420 I90RS125ATGB39 951501410 I90RS125ABGB39Inside corner 135°5/16 951501471 I135RS80ATGB39 951501441 I135RS80ABGB393/8 951501461 I135RS100ATGB39 951501449 I135RS100ABGB391/2 951501431 I135RS125ATGB39 951501448 I135RS125ABGB39



= H

A = 1-1/2" or 2-1/4"




Schluter®-SCHIENE-STEP – Stainless SteelSchluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall tile edge.The stainless steel version is available in three vertical leg lengths: 1-1/2" for countertops, 1-3/16" for stairs, and 7/16" for tile over tile applications.


Finishes:Brushed Stainless Steel 304

(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 1-1/2"1/4 100120823 SS60EB3911/32 100120922 SS90EB397/16 100120914 SS110EB391/2 100120815 SS125EB39Inside corner, 90°1/4 100121110 I90/SS60EB3911/32 100121128 I90/SS90EB397/16 100121086 I90/SS110EB391/2 100121078 I90/SS125EB39Inside corner, 135° 1/4 100121060 I135/SS60EB3911/32 100121094 I135/SS90EB397/16 100121102 I135/SS110EB391/2 100121052 I135/SS125EB39Outside corner, 90° and End Cap1/4 100121193 E90/SS60EB3911/32 100121219 E90/SS90EB397/16 100121227 E90/SS110EB391/2 100121201 E90/SS125EB39Outside corner, 135° 1/4 100121169 E135/SS60EB3911/32 100121177 E135/SS90EB397/16 100121185 E135/SS110EB391/2 100121151 E135/SS125EB39Connector1/4 100120930 V/SS60EB3911/32 100121136 V/SS90EB397/16 100121144 V/SS110EB391/2 100121045 V/SS125EB39


(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 1-3/16"11/32 100120989 SS90EB307/16 100120997 SS110EB301/2 100120971 SS125EB30Outside corner, 90° and End Cap11/32 100121029 E90/SS90EB307/16 100121037 E90/SS110EB301/2 100121011 E90/SS125EB30Connector11/32 100120807 V/SS90EB307/16 100120781 V/SS110EB301/2 100121003 V/SS125EB30


(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 7/16"1/4 100120773 SS60EB111/2 100120948 SS125EB11Connector1/4 100120963 V/SS60EB111/2 100120955 V/SS125EB11

= 11 mm = H

= H

A = 1-1/2" or 1-3/16"

= 7/16"




17/32"

5/16" 7/32"

Note: All corresponding RONDEC finishes match those of Schluter®-DESIGNLINE.

Schluter®-RONDEC-DBSchluter®-RONDEC-DB is a decorative profile for wall and skirting edges.


Schluter®-DESIGNLINESchluter®-DESIGNLINE is a border profile for creating decorative designs in wall coverings. These profiles can be combined with the appropriate Schluter®-RONDEC profiles for outside wall corners.


Stainless steel, Solid brass

Aluminum

1/4"

1"

1/4"

1"




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

17/32 951501822 DB14AE 951501910 DB14AK 951501821 DB14AMOutside corner, 90°

17/32 951500792 EV/DB14AE


Schluter Item No. Finishes

951502401 DL625E Stainless steel (E)951502577 DL625EB Brushed stainless steel (EB)951502632 DL625MC Chrome-plated solid brass (MC)951501600 DL625AE Satin anodized aluminum (AE)951501956 DL625ACG Polished chrome anod. alu. (ACG)951502026 DL625ACGB Brushed chrome anod. alu. (ACGB)951501681 DL625AT Satin nickel anod. alu. (AT)951501983 DL625ATG Polished nickel anod. alu. (ATG)951502057 DL625ATGB Brushed nickel anod. alu. (ATGB)951501682 DL625AK Satin copper/bronze anod. alu. (AK) 951501982 DL625AKG Polished copper/bronze anod. alu. (AKG)951502055 DL625AKGB Brushed copper/bronze anod. alu. (AKGB) 951501597 DL625AM Satin brass anod. alu. (AM)951501962 DL625AMG Polished brass anod. alu. (AMG)951502025 DL625AMGB Brushed brass anod. alu. (AMGB)

Outside corner (90º)




Schluter®-DECO-DE is a stainless steel finishing and edge-protection profile for 135° outside corners of tiled surfaces.


Schluter®-DECO-DE



H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 100114875 DE80ES 100114867 DE80EBS 3/8 100114859 DE100ES 100114842 DE100EBS7/16 100114891 DE110ES 100114883 DE110EBS1/2 100114834 DE125ES 100114826 DE125EBS

135°

= H

= H

Schluter®-REMASchluter®-REMA is a system for creating concealed access panels in tiled walls. REMA can be applied irrespective of the tile size and thickness, and adapts perfectly to the joint pattern.


Mounting plate

Magnet

Set = 4 Magnets + 4 Mounting plates


Schluter Item No.

951500724 REMA

Schluter®-DECO-SG is an anodized aluminum, decorative profile featuring a 1/2" wide channel that creates a shadow gap between tile courses or other wall covering. The profile may also be used as a support channel for glass walls, up to a thickness of 3/8". DECO-SG features a trapezoid-perforated anchoring leg that is secured in the bond coat beneath the tile.

Schluter®-DECO-SG


Bright chrome anod. alu. (ACB)

H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 100114958 SG80AE12 100114941 SG80ACB12 3/8 100114933 SG100AE12 100114925 SG100ACB12 7/16 100114974 SG110AE12 100114966 SG110ACB12 1/2 100114917 SG125AE12 100114909 SG125ACB12

= H

1/2" -12.5 mm

9/16" -15 mm




Schluter®-ECK-ESchluter®-ECK-E is a stainless steel edging profile for outside corners on tiled surfaces, offering excellent protection for edges subject to high degrees of wear. The perforated anchoring legs are embedded in the tile adhesive during tile installation.




H = tile thickness


Schluter Item No.


Schluter Item No.

90º AngleL = 4' 11"1/4 951502382 E37V2A60/150 951502499 E37V2AEB60/150 5/16 951502411 E37V2A80/150 951502522 E37V2AEB80/1507/16 951502430 E37V2A110/150 951502537 E37V2AEB110/150L = 6' 7"

1/4 951502491 E37V2A60/200 951502642 E37V2AEB60/2005/16 951502511 E37V2A80/200 951502656 E37V2AEB80/200 7/16 951502531 E37V2A110/200 951502667 E37V2AEB110/200L = 8' 2-1/2"

1/4 951502600 E37V2A60/250 951502746 E37V2AEB60/2505/16 951502631 E37V2A80/250 951502763 E37V2AEB80/250 7/16 951502649 E37V2A110/250 951502773 E37V2AEB110/250135º AngleL = 8' 2-1/2"

1/4 100115617 E37E60S 100115609 E37EB60S5/16 100115633 E37E80S 100115625 E37EB80S7/16 100115658 E37E110S 100115641 E37EB110S

= H

1-15/32"

= H

r = 5/16"

1-15/32"

90º 135º




W = in.

Stainless steel 304(1.4301 = V2A) (E)



Schluter Item No.


Schluter Item No.

L = 4' 11"

9/16 100115872 KI15E/150 100115864 KI15EB/150 L = 6' 7"

9/16 100115898 KI15E/200 100115880 KI15EB/200 L = 8' 2-1/2"

9/16 100115914 KI15E 100115906 KI15EB

Schluter®-ECK-KISchluter®-ECK-KI is a stainless steel profile for inside wall corners that produces a clean, decorative finish. ECK-KI is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.


Schluter®-ECK-KSchluter®-ECK-K is a stainless steel corner profile for subsequent installation on the outside corners of tile or other wall coverings. The profile is applied using Schluter®-KERDI-FIX (see page 95), or a similar adhesive.


W = in.

Stainless steel 304(1.4301 = V2A) (E)



Schluter Item No.


Schluter Item No.

90º AngleL = 4' 11"9/16 100115674 K15V2A/150 100115682 K15V2AEB/150 1-9/32 951502355 K32V2A/150 951502482 K32V2AEB/150 2 951502469 K50V2A/150 951502630 K50V2AEB/150L = 6' 7"

1-9/32 951502498 K32V2A/200 951502643 K32V2AEB/200 2 951502641 K50V2A/200 951502764 K50V2AEB/200L = 8' 2-1/2"

9/16 100115708 K15V2A/250 100115690 K15V2AEB/250 1-9/32 951502629 K32V2A/250 951502757 K32V2AEB/250 2 951502755 K50V2A/250 951502934 K50V2AEB/250 135º AngleL = 4' 11"1-9/32 100115716 K32ES/150L = 8' 2-1/2"

1-9/32 100115666 K32ES

r = 1/8"

= W = W

90º 135º

W = 9/16"

r = .03"




Schluter®-ECK-KHK

Stainless steel 304 (1.4301 = V2A) (E)

H = in.

Profile Outside corner, 90°

Inside corner, 90º (2-way)



Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 4' 11"

100115831 E/KHK15E 100115799 I/2KHK15E 100115815 I/3KHK15E

9/16 100115740 KHK15E/150 L = 6' 7"

9/16 100115765 KHK15E/200 L = 8' 2-1/2"

9/16 100115724 KHK15E Connector 100115856 V/KHK15E


H = in.

Profile Outside corner, 90°




Schluter Item No.


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 4' 11"

100115823 E/KHK15EB 100115781 I/2KHK15EB 100115807 I/3KHK15EB

9/16 100115732 KHK15EB/150 L = 6' 7"

9/16 100115757 KHK15EB/200 L = 8' 2-1/2"

9/16 100115773 KHK15EB Connector 100115849 V/KHK15EB

Schluter®-ECK-KHK is a stainless steel profile for inside wall corners that produces a radiused edge for a clean, decorative finish. ECK-KHK is subsequently bonded to the inside corners of existing tile or other wall coverings. As such, the profile can be installed as a repair so that existing, damaged corners do not have to be replaced.


Inside corner, 2-way Inside corner, 3-way

W = 9/16" mm

r = 5/16"


S T A I R - N O S I N G P R O F I L E S

Schluter®-TREP-FLSchluter®-TREP-FL is a stainless steel stair nosing profile with a protruding rounded edge used to finish and protect tiled stair edges.


= H

13/1

6"

87°

Finishes: Stainless steel (E) Brushed stainless steel (EB)

H = tile thickness


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

11/32 100055995 FL90E 100055961 FL90EB7/16 100056001 FL110E 951502530 FL110EB1/2 100056019 FL125E 100055987 FL125EBL = 4' 11"

11/32 100056050 FL 90E/150 100056027 FL90EB/150 7/16 100056068 FL110E/150 100056035 FL110EB/1501/2 100056076 FL125E/150 100056043 FL125EB/150End cap

951500501 E/FLEB 951500501 E/FLEB

End cap (E/)

Schluter®-TREP-FL

Schluter®-RONDEC-STEP

Schluter®-TREP-E






= H

A = 1-1/2" or 2-1/4"




H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502094 RS80AE39 951502365 RS80ACGB39 951502095 RS80AT39 3/8 951502109 RS100AE39 951502379 RS100ACGB39 951502111 RS100AT391/2 951502157 RS125AE39 951502405 RS125ACGB39 951502159 RS125AT39Outside corner 90°5/16 951501249 E90RS80AE39 951501378 E90RS80ACGB39 951501262 E90RS80AT39 3/8 951501210 E90RS100AE39 951501405 E90RS100ACGB39 951501222 E90RS100AT391/2 951501193 E90RS125AE39 951501390 E90RS125ACGB39 951501201 E90RS125AT39Outside corner 135°5/16 951501244 E135RS80AE39 951501457 E135RS80ACGB39 951501259 E135RS80AT39 3/8 951501247 E135RS100AE39 951501447 E135RS100ACGB39 951501263 E135RS100AT391/2 951501215 E135RS125AE39 951501435 E135RS125ACGB39 951501233 E135RS125AT39Inside corner 90°5/16 951501243 I90RS80AE39 951501456 I90RS80ACGB39 951501257 I90RS80AT39 3/8 951501261 I90RS100AE39 951501466 I90RS100ACGB39 951501245 I90RS100AT391/2 951501236 I90RS125AE39 951501417 I90RS125ACGB39 951501213 I90RS125AT39Inside corner 135°5/16 951501248 I135RS80AE39 951501469 I135RS80ACGB39 951501265 I135RS80AT39 3/8 951501242 I135RS100AE39 951501455 I135RS100ACGB39 951501256 I135RS100AT391/2 951501241 I135RS125AE39 951501429 I135RS125ACGB39 951501255 I135RS125AT39

A = 2-1/4"5/16 951502122 RS80AE57 951502386 RS80ACGB57 951502123 RS80AT573/8 951502144 RS100AE57 951502395 RS100ACGB57 951502145 RS100AT571/2 951502188 RS125AE57 951502417 RS125ACGB57 951502185 RS125AT57Outside corner 90°5/16 951501197 E90RS80AE57 951501400 E90RS80ACGB57 951501205 E90RS80AT573/8 951501189 E90RS100AE57 951501385 E90RS100ACGB57 951501191 E90RS100AT571/2 951501185 E90RS125AE57 951501383 E90RS125ACGB57 951501187 E90RS125AT57Outside corner 135°5/16 951501229 E135RS80AE57 951501426 E135RS80ACGB57 951501231 E135RS80AT573/8 951501246 E135RS100AE57 951501446 E135RS100ACGB57 951501254 E135RS100AT571/2 951501196 E135RS125AE57 951501397 E135RS125ACGB57 951501200 E135RS125AT57Inside corner 90°5/16 951501211 I90RS80AE57 951501404 I90RS80ACGB57 951501225 I90RS80AT573/8 951501235 I90RS100AE57 951501416 I90RS100ACGB57 951501214 I90RS100AT571/2 951501206 I90RS125AE57 951501394 I90RS125ACGB57 951501195 I90RS125AT57Inside corner 135°5/16 951501216 I135RS80AE57 951501439 I135RS80ACGB57 951501234 I135RS80AT573/8 951501209 I135RS100AE57 951501403 I135RS100ACGB57 951501224 I135RS100AT571/2 951501208 I135RS125AE57 951501423 I135RS125ACGB57 951501223 I135RS125AT57







H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.





= H

A = 1-1/2" or 2-1/4"







H = tile thickness


Schluter Item No.

A = 2-1/4"5/16 951502124 RS80AM573/8 951502146 RS100AM571/2 951502186 RS125AM57Outside corner 90°5/16 951501204 E90RS80AM573/8 951501190 E90RS100AM571/2 951501186 E90RS125AM57Outside corner 135°5/16 951501227 E135RS80AM573/8 951501264 E135RS100AM571/2 951501203 E135RS125AM57Inside corner 90°5/16 951501221 I90RS80AM573/8 951501212 I90RS100AM571/2 951501194 I90RS125AM57Inside corner 135°5/16 951501232 I135RS80AM573/8 951501220 I135RS100AM571/2 951501219 I135RS125AM57



H = tile thickness


Schluter Item No.


Schluter Item No.

A = 1-1/2"5/16 951502363 RS80ATGB39 951502366 RS80ABGB393/8 951502377 RS100ATGB39 951502381 RS100ABGB391/2 951502402 RS125ATGB39 951502406 RS125ABGB39Outside corner 90°5/16 951501376 E90RS80ATGB39 951501443 E90RS80ABGB393/8 951501409 E90RS100ATGB39 951501411 E90RS100ABGB391/2 951501392 E90RS125ATGB39 951501388 E90RS125ABGB39Outside corner 135°5/16 951501463 E135RS80ATGB39 951501451 E135RS80ABGB393/8 951501380 E135RS100ATGB39 951501442 E135RS100ABGB391/2 951501437 E135RS125ATGB39 951501433 E135RS125ABGB39Inside corner 90°5/16 951501462 I90RS80ATGB39 951501450 I90RS80ABGB393/8 951501440 I90RS100ATGB39 951501464 I90RS100ABGB391/2 951501420 I90RS125ATGB39 951501410 I90RS125ABGB39Inside corner 135°5/16 951501471 I135RS80ATGB39 951501441 I135RS80ABGB393/8 951501461 I135RS100ATGB39 951501449 I135RS100ABGB391/2 951501431 I135RS125ATGB39 951501448 I135RS125ABGB39



= H

A = 1-1/2" or 2-1/4"




= 11 mm = H

= H

A = 1-1/2" or 1-3/16"

Schluter®-SCHIENE-STEP - Stainless steelSchluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall tile edge.The stainless steel version is available in three vertical leg lengths: 1-1/2" for countertops, 1-3/16" for stairs, and 7/16" for tile over tile applications.



(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 1-1/2"1/4 100120823 SS60EB3911/32 100120922 SS90EB397/16 100120914 SS110EB391/2 100120815 SS125EB39Inside corner, 90°1/4 100121110 I90/SS60EB3911/32 100121128 I90/SS90EB397/16 100121086 I90/SS110EB391/2 100121078 I90/SS125EB39Inside corner, 135° 1/4 100121060 I135/SS60EB3911/32 100121094 I135/SS90EB397/16 100121102 I135/SS110EB391/2 100121052 I135/SS125EB39Outside corner, 90° and End Cap1/4 100121193 E90/SS60EB3911/32 100121219 E90/SS90EB397/16 100121227 E90/SS110EB391/2 100121201 E90/SS125EB39Outside corner, 135° 1/4 100121169 E135/SS60EB3911/32 100121177 E135/SS90EB397/16 100121185 E135/SS110EB391/2 100121151 E135/SS125EB39Connector1/4 100120930 V/SS60EB3911/32 100121136 V/SS90EB397/16 100121144 V/SS110EB391/2 100121045 V/SS125EB39


(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 1-3/16"11/32 100120989 SS90EB307/16 100120997 SS110EB301/2 100120971 SS125EB30Outside corner, 90° and End Cap11/32 100121029 E90/SS90EB307/16 100121037 E90/SS110EB301/2 100121011 E90/SS125EB30Connector11/32 100120807 V/SS90EB307/16 100120781 V/SS110EB301/2 100121003 V/SS125EB30


(1.4301 = V2A) (EB)

H = tile thickness


Schluter Item No.

A: 7/16"1/4 100120773 SS60EB111/2 100120948 SS125EB11Connector1/4 100120963 V/SS60EB111/2 100120955 V/SS125EB11

= 7/16"




Schluter®-SCHIENE-STEP - Anodized aluminumSchluter®-SCHIENE-STEP is a finishing and edging profile for ceramic tile and natural stone installations on countertops, stairs, and tile over tile applications on walls. The top of the profile features a vertical wall section that finishes and protects the tile from damage, while the vertical leg covers the edge of the sub-assembly, top of the riser, or existing wall tile edge.The anodized aluminum version is intended for residential stair applications (stairs not exposed to heavy traffic). It is available in two vertical leg lengths, 1-3/16" and 1-1/2".The ribbed vertical leg covers the sub-assembly or top of the riser. (Technical data sheet available at schluter.com)

A = 1-3/16" or 1-1/2"

= H


Satin nickel anodized aluminum (AT)

H = tile thickness


Schluter Item No.


Schluter Item No.

A = 1-3/16"5/16 100120385 SS80AE30 100120427 SS80AT303/8 100120377 SS100AE30 100120401 SS100AT301/2 100120369 SS125AE30 100120393 SS125AT309/16 100120419 SS150AE30 100120799 SS150AT30

A = 1-1/2"5/16 100120856 SS80AE39 100120898 SS80AT393/8 100120849 SS100AE39 100120880 SS100AT391/2 100120831 SS125AE39 100120872 SS125AT399/16 100120864 SS150AE39 100120906 SS150AT39

Schluter®-TREP-E/-EKSchluter®-TREP-E/-EK are stainless steel profiles designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design.

TREP-E has a stainless steel anchoring leg which is embedded in the tile bond coat. TREP-EK is subsequently bonded to existing installations using Schluter®-KERDI-FIX (see page 95), or a similar adhesive. As such, TREP-EK can be installed as a repair so that existing, damaged stair treads do not have to be replaced.

ADA – Wear surface meets or exceeds the static coefficient of friction recommendation, for use in applications where the risk of slipping exists.


End cap (E/)

= H

1-3/16"

3/8" 1/8"

1-19/64"

3/8"

3/16"

TREP-E TREP-EK

3/16"

ADA-Compliant

To adhere use Schluter®-KERDI-FIX

KERDI-FIX

Stainless steel (E) with ancholring leg

H = tile thickness


Schluter Item No.

L = 8' 2-1/2"

3/32 951502182 TE203/16 951502218 TE505/16 951502240 TE807/16 951502272 TE1105/8 951502323 TE1601 951502387 TE250L = 4' 11"

3/32 951501723 TE20/150 3/16 951501816 TE50/1505/16 951501865 TE80/1507/16 951501895 TE110/1505/8 951501922 TE160/1501 951501979 TE250/150End cap

951500339 E/TE

Stainless steel 304 (E) retro-fit

L = Length


Schluter Item No.

L = 8' 2-1/2" 951502270 TEKL = 4' 11" 951501859 TEK/150

Aluminum




Schluter®-TREP-G - Stainless steelSchluter®-TREP-G is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The surface features a self-adhesive, non-slip tread with an embedded mineral grain coating, which is available in a variety of colors and can be replaced in case of damage or wear.


= H

1-3/16"

11/16"

TREP-G

*Color Codes (-G/-GK)

CGYellow

GSBlack

NBNut brown

TTransparent

Schluter®-TREP-G-SBrushed stainless steel support with non-slip tread 1-3/16"

Colors: Yellow (CG) Black (GS) Nut brown (NB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

11/32 951502782 GSEB90CG 951502781 GSEB90GS 951502780 GSEB90NB7/16 951502791 GSEB110CG 951502790 GSEB110GS 951502789 GSEB110NB33/64 951502796 GSEB130CG 951502795 GSEB130GS 951502793 GSEB130NB9/16 951502813 GSEB150CG 951502812 GSEB150GS 951502811 GSEB150NBL = 4' 11"

11/32 951502544 GSEB90CG/150 951502545 GSEB90GS/150 951502546 GSEB90NB/1507/16 951502554 GSEB110CG/150 951502555 GSEB110GS/150 951502556 GSEB110NB/15033/64 951502562 GSEB130CG/150 951502560 GSEB130GS/150 951502559 GSEB130NB/1509/16 951502571 GSEB150CG/150 951502572 GSEB150GS/150 951502573 GSEB150NB/150Replacement tread

L = 60' 1/32" 951502894 GSKB183CG 951502892 GSKB183GS 951502893 GSKB183NBEnd cap

951500434 E/GSEB 951500434 E/GSEB 951500434 E/GSEB

End cap

Colors: Transparent (T)

H = tile thickness


Schluter Item No.

L = 8' 2-1/2"

11/32 951502779 GSEB90T7/16 951502788 GSEB110T33/64 951502794 GSEB130T9/16 951502810 GSEB150TL = 4' 11"

11/32 951502543 GSEB90T/150 7/16 951502553 GSEB110T/15033/64 951502561 GSEB130T/1509/16 951502570 GSEB150T/150Replacement tread

L = 60' 1/32" 951502895 GSKB183TEnd cap

951500434 E/GSEB




Schluter®-TREP-G-BBrushed stainless steel support with non-slip tread 2-5/32"


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

11/32 951502942 GBEB90CG 951502941 GBEB90GS 951502943 GBEB90NB7/16 951502946 GBEB110CG 951502947 GBEB110GS 951502948 GBEB110NB33/64 951502952 GBEB130CG 951502951 GBEB130GS 951502949 GBEB130NB9/16 951502954 GBEB150CG 951502955 GBEB150GS 951502956 GBEB150NBL = 4' 11"

11/32 951502675 GBEB90CG/150 951502674 GBEB90GS/150 951502676 GBEB90NB/1507/16 951502679 GBEB110CG/150 951502678 GBEB110GS/150 951502680 GBEB110NB/15033/64 951502686 GBEB130CG/150 951502685 GBEB130GS/150 951502684 GBEB130NB/1509/16 951502700 GBEB150CG/150 951502701 GBEB150GS/150 951502699 GBEB150NB/150Replacement tread

L = 60' 1/32" 951502989 GBKB183CG 951502988 GBKB183GS 951502991 GBKB183NBEnd cap

951500435 E/GBEB 951500435 E/GBEB 951500435 E/GBEB


H = tile thickness


Schluter Item No.

L = 8' 2-1/2"

11/32 951502940 GBEB90T7/16 951502945 GBEB110T33/64 951502950 GBEB130T9/16 951502953 GBEB150TL = 4' 11"

11/32 951502673 GBEB90T/150 7/16 951502677 GBEB110T/15033/64 951502687 GBEB130T/1509/16 951502698 GBEB150T/150Replacement tread

L = 60' 1/32" 951502990 GBKB183TEnd cap

951500435 E/GBEB


CGYellow

GSBlack

NBNut brown

TTransparent

End cap

Schluter®-TREP-G - Stainless steelSchluter®-TREP-G is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The surface features a self-adhesive, non-slip tread with an embedded mineral grain coating, which is available in a variety of colors and can be replaced in case of damage or wear.


= H

2-5/32"

11/16"

TREP-G




Schluter®-TREP-GK-SBrushed stainless steel support with non-slip tread 1-11/32"


L = Length Floor & Decor Item No.

Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

951502710 GSEBKCG 951502711 GSEBKGS 951502709 GSEBKNBL = 4' 11"

951502460 GSEBKCG/150 951502459 GSEBKGS/150 951502457 GSEBKNB/150Replacement treadL = 60' 1/32"

951502894 GSKB183CG 951502892 GSKB183GS 951502893 GSKB183NB


CGYellow

GSBlack

NBNut brown

TTransparent



Schluter Item No.

L = 8' 2-1/2"

951502708 GSEBKTL = 4' 11"

951502458 GSEBKT/150Replacement treadL = 60' 1/32"

951502895 GSKB183T

Schluter®-TREP-GK-BBrushed stainless steel support with non-slip tread 2-21/64"



Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

951502910 GBEBKCG 951502909 GBEBKGS 951502911 GBEBKNBL = 4' 11"

951502621 GBEBKCG/150 951502623 GBEBKGS/150 951502620 GBEBKNB/150Replacement treadL = 60' 1/32"

951502989 GBKB183CG 951502988 GBKB183GS 951502991 GBKB183NB



Schluter Item No.

L = 8' 2-1/2"

951502908 GBEBKTL = 4' 11"

951502622 GBEBKT/150Replacement treadL = 60' 1/32"

951502990 GBKB183T

Schluter®-TREP-GK - Stainless steelSchluter®-TREP-GK is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The surface features a self-adhesive, non-slip tread with an embedded mineral grain coating, which is available in a variety of colors and can be replaced in case of damage or wear. TREP-GK is bonded to existing installations using Schluter®-KERDI-FIX (see page 95), or a similar adhesive.


1/16"

1-11/32" or 2-21/64"

11/16"

TREP-GK

To adhere use Schluter®-KERDI-FIX

KERDI-FIX




NBNutBrown

GSBlack

CGYellow

GGrey

*Color Codes

HBLightbeige

Schluter®-TREP-SE - Stainless steelSchluter®-TREP-SE is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable, safe, and visually appealing stair-nosing design. The profile has a stainless steel support section with a replaceable thermoplastic tread.


TREP-SE/-S

TREP-SE

= H

1-1/32" 3/32"

End cap

TREP-SE/-S

Schluter®-TREP-SEStainless steel support with thermoplastic rubber insert 1-1/32"

Colors: Yellow (CG) Grey (G) Light beige (HB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502475 CG8SE 951502473 G8SE 951502474 HB8SE3/8 951502493 CG10SE 951502495 G10SE 951502497 HB10SE1/2 951502518 CG12SE 951502520 G12SE 951502521 HB12SEL = 4' 11"

5/16 951502136 CG8SE/150 951502138 G8SE/150 951502137 HB8SE/1503/8 951502170 CG10SE/150 951502173 G10SE/150 951502172 HB10SE/1501/2 951502197 CG12SE/150 951502194 G12SE/150 951502196 HB12SE/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951500932 PE26/CG 951500930 PE26/G 951500923 PE26/HBEnd cap

951500318 E26/CG 951500319 E26/G 951500324 E26/HB

Colors: Nut brown (NB) Black (GS)

H = tile thickness


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502471 NB8SE 951502472 GS8SE3/8 951502494 NB10SE 951502496 GS10SE1/2 951502519 NB12SE 951502517 GS12SEL = 4' 11"

5/16 951502139 NB8SE/150 951502135 GS8SE/1503/8 951502171 NB10SE/150 951502169 GS10SE/1501/2 951502195 NB12SE/150 951502193 GS12SE/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951500922 PE26/NB 951500931 PE26/GSEnd cap

951500314 E26/NB 951500322 E26/GS




End cap

TREP-SE/-S

NBNutBrown

GSBlack

CGYellow

GGrey

*Color Codes

HBLightbeige

Schluter®-TREP-SAluminum support with thermoplastic rubber insert 1-1/32"


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502251 CG8S 951502247 G8S 951502249 HB8S3/8 951502280 CG10S 951502281 G10S 951502284 HB10S1/2 951502351 CG12S 951502349 G12S 951502350 HB12SL = 4' 11"

5/16 951501866 CG8S/150 951501870 G8S/150 951501868 HB8S/1503/8 951501906 CG10S/150 951501907 G10S/150 951501904 HB10S/1501/2 951501929 CG12S/150 951501930 G12S/150 951501928 HB12S/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951500925 PEA26/CG 951500927 PEA26/G 951500928 PEA26/HBEnd cap

951500318 E26/CG 951500319 E26/G 951500324 E26/HB


H = tile thickness


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502250 NB8S 951502248 GS8S3/8 951502283 NB10S 951502282 GS10S1/2 951502348 NB12S 951502347 GS12SL = 4' 11"

5/16 951501867 NB8S/150 951501869 GS8S/1503/8 951501905 NB10S/150 951501903 GS10S/1501/2 951501927 NB12S/150 951501926 GS12S/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951500929 PEA26/NB 951500926 PEA26/GSEnd cap

951500314 E26/NB 951500322 E26/GS

Schluter®-TREP-S - AluminumSchluter®-TREP-S is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable,safe, and visually appealing stair-nosing design. The profile has an aluminum support section with a replaceable thermoplastic tread.


TREP-SE/-S

TREP-S

= H

1-1/32" 3/32"




Schluter®-TREP-BAluminum support with thermoplastic rubber insert 2-1/16"


H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502483 CG8B 951502486 G8B 951502487 HB8B3/8 951502513 CG10B 951502512 G10B 951502514 HB10B1/2 951502534 CG12B 951502533 G12B 951502536 HB12B9/16 951502565 CG15B 951502567 G15B 951502566 HB15B1 951502578 CG25B 951502579 G25B 951502582 HB25BL = 4' 11"

5/16 951502152 CG8B/150 951502154 G8B/150 951502153 HB8B/1503/8 951502213 CG10B/150 951502212 G10B/150 951502211 HB10B/1501/2 951502256 CG12B/150 951502254 G12B/150 951502252 HB12B/1509/16 951502311 CG15B/150 951502313 G15B/150 951502314 HB15B/1501 951502340 CG25B/150 951502336 G25B/150 951502338 HB25B/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951501688 PEA52/CG 951501684 PEA52/G 951501687 PEA52/HB

End cap951500331 E52/CG 951500334 E52/G 951500333 E52/HB


H = tile thickness


Schluter Item No.


Schluter Item No.

L = 8' 2-1/2"

5/16 951502485 NB8B 951502484 GS8B3/8 951502515 NB10B 951502516 GS10B1/2 951502535 NB12B 951502532 GS12B9/16 951502568 NB15B 951502564 GS15B1 951502580 NB25B 951502581 GS25BL = 4' 11"

5/16 951502151 NB8B/150 951502150 GS8B/1503/8 951502214 NB10B/150 951502215 GS10B/1501/2 951502253 NB12B/150 951502255 GS12B/1509/16 951502315 NB15B/150 951502312 GS15B/1501 951502339 NB25B/150 951502337 GS25B/150Replacement thermoplastic rubber insertL = 8' 2-1/2" 951501686 PEA52/NB 951501685 PEA52/GS

End cap951500330 E52/NB 951500335 E52/GS

TREP-B

End cap

NBNutBrown

GSBlack

CGYellow

GGrey

*Color Codes

HBLightbeige

Schluter®-TREP-B - AluminumSchluter®-TREP-B is designed to protect tiled stair edges and provide an easily visible, slip-resistant wear surface for durable,safe, and visually appealing stair-nosing design. The profile has an aluminum support section with a replaceable thermoplastic tread. The tread surface is available in a variety of colors and can be replaced in case of damage or wear.

TREP-B

= H

2-1/16" 3/32"




Schluter®-TREP-TAPSchluter®-TREP-TAP is an anodized aluminum cover profile that can be used in conjunction with the Schluter®-TREP-S or TREP-B stair-nosing profiles to conceal the top of the riser.


= H

= A

2-13

/32"

Schluter®-TREP-TAPSatin anod. alu. (AE)


Schluter Item No.

L = 8' 2-1/2"

951501915 TAPR61AE L = 4' 11"

951501126 TAPR61AE/150



M O V E M E N T J O I N T & C O V E - S H A P E D P R O F I L E S

Schluter®-DILEX-BWBSchluter®-DILEX-EKE

Schluter®-DILEX-AHK




Schluter®-DILEX-EZ 6 + 9 - PVCSchluter®-DILEX 6 and 9 combine decorative design with stress-relieving function for tile and stone set in a thin bed of adhesive. The profile features two usable surfaces in different colors. The sidewalls are made of rigid PVC; the movement zones are made of soft PVC.


= H

9/32"

Schluter®-DILEX-BWS - PVCSchluter®-DILEX-BWS is a movement joint profile with side sections made of rigid, recycled PVC. The movement zone, made of soft CPE, creates the 3/16”-wide visible surface.


= H

3/16"

2-3/16"

*Color Codes

GGrey

CGYellow

M/G = Brass inlay / greyC/CG = Chrome inlay / yellow

Colors: Grey(G)

Yellow(CG)

H = tile thickness

Floor & Decor Item No. Item No. Floor & Decor

Item No. Item No.

1/4 951500905 EZM/G6 951500904 EZC/CG611/32 951501081 EZM/G9 951501080 EZC/CG9

Colors: Bright white(BW)

Sand pebble(SP)

Light beige(HB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951500970 BWS45BW 951500954 BWS45SP 951500971 BWS45HB1/4 951500965 BWS60BW 951500968 BWS60SP 951500957 BWS60HB5/16 951500958 BWS80BW 951500964 BWS80SP 951500961 BWS80HB11/32 951501028 BWS90BW 951501019 BWS90SP 951501014 BWS90HB3/8 951501024 BWS100BW 951501017 BWS100SP 951501037 BWS100HB7/16 951501029 BWS110BW 951501035 BWS110SP 951501033 BWS110HB1/2 951501034 BWS125BW 951501023 BWS125SP 951501025 BWS125HB

Colors: Classic grey(PG)

Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951500955 BWS45PG 951500956 BWS45G 951500969 BWS45GS1/4 951500962 BWS60PG 951500966 BWS60G 951500967 BWS60GS5/16 951500963 BWS80PG 951500960 BWS80G 951500959 BWS80GS11/32 951501018 BWS90PG 951501031 BWS90G 951501016 BWS90GS3/8 951501015 BWS100PG 951501036 BWS100G 951501020 BWS100GS7/16 951501032 BWS110PG 951501030 BWS110G 951501026 BWS110GS1/2 951501022 BWS125PG 951501021 BWS125G 951501027 BWS125GS

BWBrightwhite

SPSandpebble

*Color Codes

HBLightbeige

PGClassicgrey

GGrey

GSBlack




Finishes: Stainless steel (E)

H = tile thickness


Schluter Item No.

5/16 951502657 EDP8011/32 951502659 EDP903/8 951502661 EDP1007/16 951502668 EDP1101/2 951502683 EDP12517/32 951502702 EDP1405/8 951502712 EDP16023/32 951502723 EDP18513/16 951502735 EDP2101 951502754 EDP2501-3/16 951502770 EDP300

BWBrightwhite

SPSandpebble

*Color Codes

HBLightbeige

Schluter®-DILEX-BWB - PVCSchluter®-DILEX-BWB is a movement joint profile with side sections made of rigid, recycled PVC. The top movement zone, made of soft CPE, creates the 3/8”-wide visible surface.


= H

3/8"

2-3/16"

= H

15/32"Schluter®-DILEX-EDP - Stainless steelSchluter®-DILEX-EDP is a stainless steel movement profile that allows horizontal movement via a tongue-and-groove connection.



Sand pebble(SP)

Light beige(HB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501073 BWB60BW - - 951501070 BWB60HB5/16 951501115 BWB80BW 951501118 BWB80SP 951501119 BWB80HB3/8 951501297 BWB100BW 951501285 BWB100SP 951501288 BWB100HB1/2 951501279 BWB125BW 951501278 BWB125SP 951501282 BWB125HB


Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

1/4 951501072 BWB60PG 951501071 BWB60G 951501074 BWB60GS5/16 951501116 BWB80PG 951501117 BWB80G 951501113 BWB80GS3/8 951501283 BWB100PG 951501287 BWB100G 951501286 BWB100GS1/2 951501280 BWB125PG 951501284 BWB125G 951501281 BWB125GS9/16 - - 951501516 BWB150G - -3/4 - - 951501584 BWB200G - -

PGClassicgrey

GGrey

GSBlack




Schluter®-DILEX-KSN - Stainless steelSchluter®-DILEX-KSN is a movement profile with edge protection. The profile consists of side anchoring legs made of stainless steel, which are connected to a movement zone of soft synthetic rubber.

(Technical data sheet available at schluter.com)Stainless steel

7/16"

2-11/16"

GGrey

GSBlack

SPSandpebble

HBLightbeige

*Color Codes

PGClassicgrey

Colors: Sand pebble(SP)

Light beige(HB)

Classic grey(PG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502606 EKSN80SP 951502605 EKSN80HB 951502609 EKSN80PG3/8 951502715 EKSN100SP 951502716 EKSN100HB 951502717 EKSN100PG7/16 951502725 EKSN110SP 951502724 EKSN110HB 951502726 EKSN110PG1/2 951502732 EKSN125SP 951502730 EKSN125HB 951502731 EKSN125PG17/32 951502737 EKSN140SP 951502745 EKSN140HB 951502738 EKSN140PG5/8 951502752 EKSN160SP 951502749 EKSN160HB 951502750 EKSN160PG23/32 951502760 EKSN185SP 951502759 EKSN185HB 951502762 EKSN185PG13/16 951502766 EKSN210SP 951502765 EKSN210HB 951502768 EKSN210PG1 951502787 EKSN250SP 951502783 EKSN250HB 951502785 EKSN250PG1-3/16 951502829 EKSN300SP 951502830 EKSN300HB 951502831 EKSN300PGRubber insert replacement

951500789 KSE/SP 951500786 KSE/HB 951500787 KSE/PG

Colors: Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 951502608 EKSN80G 951502607 EKSN80GS3/8 951502713 EKSN100G 951502714 EKSN100GS7/16 951502727 EKSN110G 951502728 EKSN110GS1/2 951502729 EKSN125G 951502733 EKSN125GS17/32 951502739 EKSN140G 951502736 EKSN140GS5/8 951502748 EKSN160G 951502751 EKSN160GS23/32 951502761 EKSN185G 951502758 EKSN185GS13/16 951502769 EKSN210G 951502767 EKSN210GS1 951502786 EKSN250G 951502784 EKSN250GS1-3/16 951502828 EKSN300G 951502832 EKSN300GSRubber insert replacement

951500788 KSE/G 951500790 KSE/GS




Schluter®-DILEX-BT - AluminumSchluter®-DILEX-BT is a structural expansion joint profile made of aluminum with opposing support profiles that connect to a sliding telescopic center section. This allows for absorption of three-dimensional movement.


= H

1-19/32"

1-3/16"1-3/32"

3/16"


H = tile thickness


Schluter Item No.

5/16 951502924 AEBT803/8 951502925 AEBT1001/2 951502928 AEBT1259/16 951502935 AEBT15011/16 951502938 AEBT1753/4 951502944 AEBT200


Light beige(HB)

Classic grey(PG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502133 AKSN80SP 951502134 AKSN80HB 951502131 AKSN80PG3/8 951502177 AKSN100SP 951502180 AKSN100HB 951502178 AKSN100PG7/16 951502202 AKSN110SP 951502203 AKSN110HB 951502201 AKSN110PG1/2 951502223 AKSN125SP 951502225 AKSN125HB 951502224 AKSN125PG17/32 951502245 AKSN140SP 951502244 AKSN140HB 951502243 AKSN140PG5/8 951502278 AKSN160SP 951502285 AKSN160HB 951502279 AKSN160PG13/16 951502371 AKSN210SP 951502374 AKSN210HB 951502372 AKSN210PGRubber insert replacement

951500789 KSE/SP 951500786 KSE/HB 951500787 KSE/PG

Colors: Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 951502132 AKSN80G 951502130 AKSN80GS3/8 951502176 AKSN100G 951502179 AKSN100GS7/16 951502200 AKSN110G 951502204 AKSN110GS1/2 951502222 AKSN125G 951502226 AKSN125GS17/32 951502246 AKSN140G 951502242 AKSN140GS5/8 951502276 AKSN160G 951502277 AKSN160GS13/16 951502373 AKSN210G 951502375 AKSN210GSRubber insert replacement

951500788 KSE/G 951500790 KSE/GS

GGrey

GSBlack

SPSandpebble

HBLightbeige

*Color Codes

PGClassicgrey

Schluter®-DILEX-KSN - AluminumSchluter®-DILEX-KSN is a movement profile with edge protection. The profile consists of side anchoring legs made of aluminum which are connected to a movement zone of soft synthetic rubber.

(Technical data sheet available at schluter.com)Aluminum

2-5/16"

7/16"




= H

1/4"

2-5/16"

GGrey

GSBlack

SPSandpebble

HBLightbeige

*Color Codes

PGClassicgrey

Schluter®-DILEX-AKWS - AluminumSchluter®-DILEX-AKWS is a movement profile for tiled coverings. The anchoring legs and vertical side sections, made of aluminum, are connected to a soft, PVC movement zone, which is also the visible surface.



Light beige(HB)

Classic grey(PG)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501909 AKWS80SP 951501912 AKWS80HB 951501902 AKWS80PG11/32 951501947 AKWS90SP 951501944 AKWS90HB 951501945 AKWS90PG3/8 951501959 AKWS100SP 951501957 AKWS100HB 951501958 AKWS100PG7/16 951501975 AKWS110SP 951501973 AKWS110HB 951501974 AKWS110PG1/2 951501999 AKWS125SP 951502000 AKWS125HB 951502001 AKWS125PG17/32 951502038 AKWS140SP 951502039 AKWS140HB 951502037 AKWS140PG5/8 951502116 AKWS160SP 951502115 AKWS160HB 951502117 AKWS160PG13/16 951502205 AKWS210SP 951502208 AKWS210HB 951502206 AKWS210PG

Colors: Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.

5/16 951501911 AKWS80G 951501913 AKWS80GS11/32 951501946 AKWS90G 951501943 AKWS90GS3/8 951501961 AKWS100G 951501960 AKWS100GS7/16 951501971 AKWS110G 951501972 AKWS110GS1/2 951501998 AKWS125G 951502002 AKWS125GS17/32 951502036 AKWS140G 951502040 AKWS140GS5/8 951502118 AKWS160G 951502114 AKWS160GS13/16 951502209 AKWS210G 951502207 AKWS210GS




11/32"

3/4"

1-1/

8"

Schluter®-DILEX-AS - PVCSchluter®-DILEX-AS is a joining profile for creating flexible joints to fixtures such as shower trays, bathtubs, and door and window frames. The profile is made of rigid and soft PVC.

Note: Suitable for tiles 3/16" to 3/8" thick.


Standard tub surround requires:• Dilex-AS – 2 units • Inside corner – 2 units• Left end cap – 1 unit • Right end cap – 1 unit

End cap

Inside corner


H = tile thickness Floor & Decor Item No.

Schluter Item No.

11/32 951501587 AS20BWOutside end cap (right) 100114750 EKR/AS20BWOutside end cap (left) 100114594 EKL/AS20BWInside corners 100115336 I/AS20BW2 inside corners + 1 right end cap + 1 left end cap

951500430 EKI/AS20BW

Color Code

BWBright white




= H

3/16"

1-3/16"

Schluter®-DILEX-BWA - PVCSchluter®-DILEX-BWA is a movement profile made of recycled rigid PVC and soft CPE that provides a 3/16"-wide, flexible connection to existing construction elements, such as windows, door frames, thresholds, etc.



Sand pebble(SP)

Light beige(HB)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951501093 BWA45BW - - 951501085 BWA45HB1/4 951501314 BWA60BW 100115344 BWA60SP 951501309 BWA60HB5/16 951501345 BWA80BW 951501346 BWA80SP 951501342 BWA80HB3/8 951501373 BWA100BW 951501363 BWA100SP 951501372 BWA100HB1/2 951501501 BWA125BW 951501498 BWA125SP 951501496 BWA125HB


Grey(G)

Black(GS)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

3/16 951501094 BWA45PG 951501087 BWA45G 951501086 BWA45GS1/4 951501308 BWA60PG 951501313 BWA60G 951501312 BWA60GS5/16 951501344 BWA80PG 951501343 BWA80G 951501347 BWA80GS3/8 951501364 BWA100PG 951501365 BWA100G 951501362 BWA100GS1/2 951501500 BWA125PG 951501499 BWA125G 951501495 BWA125GS

*Color Codes

BWBrightwhite

GGrey

GSBlack

PGClassicgrey

HBLightbeige

SPSand pebble




Schluter®-DILEX-KSA - Stainless steelSchluter®-DILEX-KSA is a perimeter joint profile with a stainless steel anchoring leg and a 3/8"-wide, soft thermoplastic rubber movement zone that isolates the tile covering from fixed building elements (e.g., window and door frames).

*Color Codes

HBLightbeige

PGClassicgrey

GGrey

GSBlack

3/8"Stainless steel

= H

Colors: Light beige(HB)

Classic grey(PG)

Grey(G)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502481 EKSA80HB 951502480 EKSA80PG 951502478 EKSA80G3/8 951502592 EKSA100HB 951502593 EKSA100PG 951502595 EKSA100G7/16 951502603 EKSA110HB 951502602 EKSA110PG 951502601 EKSA110G1/2 951502614 EKSA125HB 951502615 EKSA125PG 951502617 EKSA125G17/32 951502627 EKSA140HB 951502625 EKSA140PG 951502624 EKSA140G5/8 951502635 EKSA160HB 951502636 EKSA160PG 951502637 EKSA160G23/32 951502646 EKSA185HB 951502647 EKSA185PG 951502645 EKSA185G13/16 951502654 EKSA210HB 951502655 EKSA210PG 951502652 EKSA210G1 951502669 EKSA250HB 951502671 EKSA250PG 951502672 EKSA250G1-3/16 951502704 EKSA300HB 951502705 EKSA300PG 951502706 EKSA300G

Rubber insert replacement951500910 KSAE/HB 951500911 KSAE/PG 951500909 KSAE/G

Colors: Black(GS)

H = tile thickness


Schluter Item No.

5/16 951502479 EKSA80GS3/8 951502594 EKSA100GS7/16 951502604 EKSA110GS1/2 951502616 EKSA125GS17/32 951502626 EKSA140GS5/8 951502638 EKSA160GS23/32 951502648 EKSA185GS13/16 951502653 EKSA210GS1 951502670 EKSA250GS1-3/16 951502707 EKSA300GS

Rubber insert replacement951500912 KSAE/GS





Sand pebble(SP)

Light beige(HB)

U = floor or wall,

O = wall


Schluter Item No.


Schluter Item No.


Schluter Item No.

951500998 EKEU8/O7BW 951500996 EKEU8/O7SP 951501000 EKEU8/O7HB951501050 EKEU9/O8BW 951501053 EKEU9/O8SP 951501049 EKEU9/O8HB951501078 EKEU11/O10BW 951501079 EKEU11/O10SP 951501069 EKEU11/O10HB951501107 EKEU13/O12BW 951501109 EKEU13/O12SP 951501110 EKEU13/O12HB951501271 EKEU15/O14BW 951501273 EKEU15/O14SP 951501268 EKEU15/O14HB

= O

= U

3/16"

U: 8 = 5/16" 9 = 11/32" 11 = 7/16" 13 = 33/64" 15 = 9/16"

O: 7 = 9/32" 8 = 5/16" 10 = 3/8" 12 = 1/2" 14 = 17/32"

Schluter®-DILEX-EKE - PVCSchluter®-DILEX-EKE is a corner movement profile that effectively absorbs movement at inside wall corners and at floor/wall transitions in applications where no large movement is expected. The profile is made of recycled rigid PVC with a soft CPE movement zone.

(Technical data sheet available at schluter.com)Inside wall corners Floor/wall transition

Colors: Light beige(HB)

Classic grey(PG)

Grey(G)

H = tile thickness


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502021 AKSA80HB 951502020 AKSA80PG 951502019 AKSA80G3/8 951502027 AKSA100HB 951502028 AKSA100PG 951502029 AKSA100G7/16 951502071 AKSA110HB 951502070 AKSA110PG 951502068 AKSA110G1/2 951502075 AKSA125HB 951502078 AKSA125PG 951502077 AKSA125G17/32 951502129 AKSA140HB 951502128 AKSA140PG 951502126 AKSA140G

Rubber insert replacement951500910 KSAE/HB 951500911 KSAE/PG 951500909 KSAE/G

Colors: Black(GS)

H = tile thickness


Schluter Item No.

5/16 951502022 AKSA80GS3/8 951502030 AKSA100GS7/16 951502069 AKSA110GS1/2 951502076 AKSA125GS17/32 951502127 AKSA140GS

Rubber insert replacement951500912 KSAE/GS

*Color Codes

HBLightbeige

PGClassicgrey

GGrey

GSBlack


Grey(G)

Black(GS)

U = floor or wall,

O = wall


Schluter Item No.


Schluter Item No.


Schluter Item No.

951500999 EKEU8/O7PG 951500995 EKEU8/O7G 951500997 EKEU8/O7GS951501052 EKEU9/O8PG 951501051 EKEU9/O8G 951501048 EKEU9/O8GS951501075 EKEU11/O10PG 951501076 EKEU11/O10G 951501077 EKEU11/O10GS951501108 EKEU13/O12PG 951501111 EKEU13/O12G 951501106 EKEU13/O12GS951501270 EKEU15/O14PG 951501269 EKEU15/O14G 951501272 EKEU15/O14GS

*Color Codes

BWBrightwhite

GGrey

GSBlack

PGClassicgrey

HBLightbeige

SPSand pebble

Schluter®-DILEX-KSA - AluminumSchluter®-DILEX-KSA is a perimeter joint profile with an aluminum anchoring leg and a 3/8"-wide, soft thermoplastic rubber movement zone that isolates the tile covering from fixed building elements (e.g., window and door frames).

= H

3/8"Aluminum




U: 7 = 9/32” 9 = 11/32” 11 = 7/16”

O: 7 = 9/32” 9 = 11/32” 11 = 7/16”

= O

= U

r = 11/16"

Schluter®-DILEX-HKW - PVCSchluter®-DILEX-HKW is a cove-shaped profile for inside wall corners and floor/wall transitions in applications where only slight movement occurs. The profile’s anchoring legs are made of recycled rigid PVC; the cove section is made of colored PVC.


Outside corner Inside corner, 3-wayInside corner, 2-way End cap


Light beige(HB)

Classic grey(PG)

U = floor or wall, O = wall


Schluter Item No.


Schluter Item No.


Schluter Item No.

951501559 HKWU7/O7BW 951501560 HKWU7/O7HB 951501550 HKWU7/O7PG951501556 HKWU9/O9BW 951501555 HKWU9/O9HB 951501552 HKWU9/O9PG951501557 HKWU11/O11BW 951501558 HKWU11/O11HB 951501553 HKWU11/O11PG

Outside corner 100052703 A/HKW/BW 951500506 A/HKW/HB 951500524 A/HKW/PGInside corner (2-way)

951500517 I/HKW2R18/BW 951500521 I/HKW2R18/HB 951500519 I/HKW2R18/PG

Inside corner (3-way)

951500516 I/HKW3R18/BW 951500520 I/HKW3R18/HB 951500518 I/HKW3R18/PG

End cap - - - - - -

Colors: Grey(G)



Schluter Item No.

951501561 HKWU7/O7G951501551 HKWU9/O9G951501554 HKWU11/O11G

Outside corner 951500508 A/HKW/GInside corner (2-way)

951500514 I/HKW2R18/G


951500513 I/HKW3R18/G

End cap 951503048 E/HKW/G

GGrey

BWBrightwhite

HBLightbeige

*Color Codes

PGClassicgrey

Note: End cap available in grey only Can be used for all DILEX-HKW profiles.




= O

= U

r = 11/16"

GGrey

BWBrightwhite

HBLightbeige

*Color CodesU: 12 = 1/2"

O: 9 = 11/32"

Schluter®-DILEX-HK - PVCSchluter®-DILEX-HK, a cove-shaped profile for floor/wall transitions, is suited for use in commercial bathrooms and the food processing industry. The profile’s anchoring legs are made of recycled rigid PVC; the cove section is made of colored CPE.

Note on inside corner (3-way):To create a cove and trim for 3-way inside corners, Schluter®-DILEX-HK must be used in combination with Schluter®-DILEX-HKW (page 75).


Outside corner

Connector

Inside corner, 2-way

End cap

Inside corner, 3-way Schluter®-DILEX-HK integrated with Schluter®-DILEX-HKW (see page 75) to create a 3-way inside corner.

Schluter®-DILEX-HKW

Schluter®-DILEX-HK

Schluter®-DILEX-HK


Light beige(HB)

Grey(G)



Schluter Item No.


Schluter Item No.


Schluter Item No.

951501955 HKU12/O9BW 951501953 HKU12/O9HB 951501954 HKU12/O9GOutside corner 951500522 A/HK/BW 951500523 A/HK/HB 951500509 A/HK/GInside corner (2-way)

951500504 I/HK2R18/BW 951500526 I/HK2R18/HB 951500525 I/HK2R18/G


951500512 I/HK3R18/BW 951500515 I/HK3R18/HB 951500511 I/HK3R18/G

Connector 951500329 V/HK 951500329 V/HK 951500329 V/HKEnd cap (left) - - - - 951500502 EL/HK/GEnd cap (right) - - - - 951500510 ER/HK/G

Note: End cap available in grey only Can be used for all DILEX-HK profiles.




= H

= H

r = 3/8"

Schluter®-DILEX-AHK - AluminumSchluter®-DILEX-AHK is an anodized aluminum, cove-shaped profile for inside wall corners, countertop/backsplash transitions, and floor/wall transitions in environments with strict hygienic requirements and where limited movement is expected. The profile features a single anchoring leg design for ease of installation.






Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501726 AHK1S80AE 951502232 AHK1S80ACG 951502168 AHK1S80ACGB3/8 951501863 AHK1S100AE 951502257 AHK1S100ACG 951502191 AHK1S100ACGB1/2 951501914 AHK1S125AE 951502271 AHK1S125ACG 951502229 AHK1S125ACGBOutside corners, 90°

951501617 E90/AHK1S/AE 951501770 E90/AHK1S/ACG 951501747 E90/AHK1S/ACGB

Outside corners, 135°

951501660 E135/AHK1S/AE 951501790 E135/AHK1S/ACG 951501734 E135/AHK1S/ACGB

Inside corners, 90°

951501632 I90/AHK1S/AE 951501778 I90/AHK1S/ACG 951501787 I90/AHK1S/ACGB


951501635 I135/AHK1S/AE 951501782 I135/AHK1S/ACG 951501739 I135/AHK1S/ACGB

Connector 951500437 V/AHK 951500437 V/AHK 951500437 V/AHKEnd cap 951500832 E/AHK1S/AE 951501099 E/AHK1S/ACG 951501097 E/AHK1S/ACGBOutside corners square, 90°

100114990 E90Q/AHK1S/AE 100114982 E90Q/AHK1S/ACG - -





Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501932 AHK1S80AT 951502287 AHK1S80ATG 951502237 AHK1S80ATGB3/8 951200331 AHK1S100AT 951502317 AHK1S100ATG 951502267 AHK1S100ATGB1/2 951501989 AHK1S125AT 951502334 AHK1S125ATG 951502296 AHK1S125ATGB9/16 951502006 AHK1S150AT - - - -


951501618 E90/AHK1S/AT 951501771 E90/AHK1S/ATG 951501749 E90/AHK1S/ATGB


951501662 E135/AHK1S/AT 951501791 E135/AHK1S/ATG 951501795 E135/AHK1S/ATGB


100046424 I90/AHK1S/AT 951501781 I90/AHK1S/ATG 951501788 I90/AHK1S/ATGB


951501636 I135/AHK1S/AT 951501783 I135/AHK1S/ATG 951501741 I135/AHK1S/ATGB

Connector 951500437 V/AHK 951500437 V/AHK 951500437 V/AHKEnd cap E/AHK1S/AT 951501098 E/AHK1S/ATG 951501102 E/AHK1S/ATGBOutside corners square, 90°

100115005 E90Q/AHK1S/AT - - - -








Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501934 AHK1S80AK 951502286 AHK1S80AKG 951502238 AHK1S80AKGB3/8 951501965 AHK1S100AK 951502316 AHK1S100AKG 951502268 AHK1S100AKGB1/2 951501988 AHK1S125AK 951502333 AHK1S125AKG 951502297 AHK1S125AKGB


951501631 E90/AHK1S/AK 951501772 E90/AHK1S/AKG 951501748 E90/AHK1S/AKGB


951501665 E135/AHK1S/AK 951501793 E135/AHK1S/AKG 951501732 E135/AHK1S/AKGB


951501657 I90/AHK1S/AK 951501779 I90/AHK1S/AKG 951501784 I90/AHK1S/AKGB


951501659 I135/AHK1S/AK 951501785 I135/AHK1S/AKG 951501740 I135/AHK1S/AKGB

Connector 951500437 V/AHK 951500437 V/AHK 951500437 V/AHKEnd cap 951500831 E/AHK1S/AK 951501100 E/AHK1S/AKG 951501103 E/AHK1S/AKGB





Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501933 AHK1S80AM 951502262 AHK1S80AMG 951502210 AHK1S80AMGB3/8 951501963 AHK1S100AM 951502275 AHK1S100AMG 951502233 AHK1S100AMGB1/2 951501987 AHK1S125AM 951502307 AHK1S125AMG 951502263 AHK1S125AMGB


951501619 E90/AHK1S/AM 951501773 E90/AHK1S/AMG 951501746 E90/AHK1S/AMGB


951501661 E135/AHK1S/AM 951501792 E135/AHK1S/AMG 951501794 E135/AHK1S/AMGB


951501633 I90/AHK1S/AM 951501780 I90/AHK1S/AMG 951501736 I90/AHK1S/AMGB


951501637 I135/AHK1S/AM 951501786 I135/AHK1S/AMG 951501738 I135/AHK1S/AMGB

Connector 951500437 V/AHK 951500437 V/AHK 951500437 V/AHKEnd cap 951500834 E/AHK1S/AM 951501101 E/AHK1S/AMG 951501104 E/AHK1S/AMGB

= H

= H

r = 3/8"






Finishes: Brushed graphite anod. alu. (AGRB)


Schluter Item No.

5/16 951502236 AHK1S80AGRB3/8 951502266 AHK1S100AGRB1/2 951502295 AHK1S125AGRB9/16 951502327 AHK1S150AGRB


951501745 E90/AHK1S/AGRB


951501735 E135/AHK1S/AGRB


951501789 I90/AHK1S/AGRB


951501737 I135/AHK1S/AGRB

Connector 951500437 V/AHKEnd cap 951501105 E/AHK1S/AGRB

Inside corner, 2- or 3-way (90º or 135º)

Connector


End cap Outside corner, square (90º)





Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951502290 AHK1S80TSB 951502289 AHK1S80TSOB 951502291 AHK1S80TSG3/8 951502310 AHK1S100TSB 951502308 AHK1S100TSOB 951502309 AHK1S100TSG1/2 951502331 AHK1S125TSB 951502330 AHK1S125TSOB 951502332 AHK1S125TSG


951501875 E90/AHK1S/TSB 951501877 E90/AHK1S/TSOB 951501876 E90/AHK1S/TSG


951501880 E135/AHK1S/TSB 951501872 E135/AHK1S/TSOB 951501883 E135/AHK1S/TSG


951501878 I90/AHK1S/TSB 951501879 I90/AHK1S/TSOB 951501874 I90/AHK1S/TSG


951501882 I135/AHK1S/TSB 951501881 I135/AHK1S/TSOB 951501873 I135/AHK1S/TSG

Connector 951500437 V/AHK 951500437 V/AHK 951500437 V/AHKEnd cap 951501316 E/AHK1S/TSB 951501315 E/AHK1S/TSOB 951501317 E/AHK1S/TSGOutside corners square, 90°

100115013 E90Q/AHK1S/TSB 100115021 E90Q/AHK1S/TSOB 100115039 E90Q/AHK1S/TSG

= H

= H

r = 3/8"






Schluter®-DILEX-AHKA - Aluminum

r = 3/8"

= H

Schluter®-DILEX-AHKA is an anodized aluminum, cove-shaped profile for transitions between walls to be tiled and previously finished floors. DILEX-AHKA prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food-processing plants, or any tiled environment where a sanitary cove base is desired. DILEX-AHKA integrates with the Schluter®-DILEX-AHK and Schluter®-RONDEC profiles at 90° inside and outside vertical wall corners, respectively.


End cap


90º inside corners can be used 2-way, or 3-way when combined with DILEX-AHK on the vertical inside corner.





Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 100084995 AHKA80AE 100115146 AHKA80ACGB 100115161 AHKA80AT3/8 100048289 AHKA100AE 100106418 AHKA100ACGB 951200265 AHKA100AT1/2 100065671 AHKA125AE 100115047 AHKA125ACGB 100115062 AHKA125AT9/16 100115195 AHKA150AE 100115179 AHKA150ACGB 100115203 AHKA150AT


100115260 E90/AHKA/AE 100115252 E90/AHKA/ACGB 100115278 E90/AHKA/AT


100115120 E135/AHKA/AE 100115104 E135/AHKA/ACGB 100115138 E135/AHKA/AT


100048297 I90/AHKA/AE 100115211 I90/AHKA/ACGB 100115237 I90/AHKA/AT


100115096 I135/AHKA/AE 100115088 I135/AHKA/ACGB 951200264 I135/AHKA/AT

End cap (left) 100048305 EL/AHKA/AE 100115286 EL/AHKA/ACGB 951200263 EL/AHKA/ATEnd cap (right) 100048313 ER/AHKA/AE 100115310 ER/AHKA/ACGB 100115328 ER/AHKA/AT



Schluter Item No.

5/16 100115153 AHKA80ATGB3/8 100007749 AHKA100ATGB1/2 100115054 AHKA125ATGB9/16 100115187 AHKA150ATGB


100115245 E90/AHKA/ATGB


100115112 E135/AHKA/ATGB


100115229 I90/AHKA/ATGB


100115070 I135/AHKA/ATGB

End cap (left) 100115294 EL/AHKA/ATGBEnd cap (right) 100115302 ER/AHKA/ATGB




Schluter®-DILEX-PHK - PVC

= H

r = 3/8"

= H

Schluter®-DILEX-PHK is a PVC, cove-shaped profile for inside wall corners, countertop/backsplash transitions and floor/wall transitions in applications where limited movement is expected. DILEX-PHK provides a 3/8" radius to prevent the accumulation of dirt and makes cleaning simple. DILEX-PHK prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, food processing plants, or any tiled environment where a sanitary cove base is desired.


White(W)

Sand pebble (SP)


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501338 PHK1S80BW 951501334 PHK1S80W 951501337 PHK1S80SP3/8 951501487 PHK1S100BW 951501479 PHK1S100W 951501489 PHK1S100SP1/2 951501507 PHK1S125BW 951501510 PHK1S125W 951501509 PHK1S125SP


951500423 E90/PHK1S/BW 951500397 E90/PHK1S/W 951500411 E90/PHK1S/SP


951500427 E135/PHK1S/BW 951500417 E135/PHK1S/W 951500424 E135/PHK1S/SP


951500420 I90/PHK1S/BW 951500401 I90/PHK1S/W 951500407 I90/PHK1S/SP


951500418 I135/PHK1S/BW 951500399 I135/PHK1S/W 951500410 I135/PHK1S/SP

Connector 951500328 V/PHK 951500328 V/PHK 951500328 V/PHKEnd cap (right) 951500400 E/PHK1S/BW 951500406 E/PHK1S/W 951500403 E/PHK1S/SP

Colors: Bahama(BH)

Light beige(HB)

Classic grey (PG)


Schluter Item No.


Schluter Item No.


Schluter Item No.

5/16 951501336 PHK1S80BH 951501340 PHK1S80HB 951501335 PHK1S80PG3/8 951501481 PHK1S100BH 951501478 PHK1S100HB 951501480 PHK1S100PG1/2 951501505 PHK1S125BH 951501506 PHK1S125HB 951501511 PHK1S125PG


951500416 E90/PHK1S/BH 951500414 E90/PHK1S/HB 951500396 E90/PHK1S/PG


951500426 E135/PHK1S/BH 951500425 E135/PHK1S/HB 951500395 E135/PHK1S/PG


951500429 I90/PHK1S/BH 951500419 I90/PHK1S/HB 951500428 I90/PHK1S/PG


951500415 I135/PHK1S/BH 951500413 I135/PHK1S/HB 951500398 I135/PHK1S/PG

Connector 951500328 V/PHK 951500328 V/PHK 951500328 V/PHKEnd cap (right) 951500422 E/PHK1S/BH 951500404 E/PHK1S/HB 951500421 E/PHK1S/PG




Finishes: Grey(G)


Schluter Item No.

5/16 951501339 PHK1S80G3/8 951501488 PHK1S100G1/2 951501508 PHK1S125G


951500409 E90/PHK1S/G


951500412 E135/PHK1S/G


951500405 I90/PHK1S/G


951500408 I135/PHK1S/G

Connector 951500328 V/PHKEnd cap (right) 951500402 E/PHK1S/G

ConnectorOutside corner (90º or 135º) End capInside corner (90º or 135º)

90º inside corners can be used 2-way or 3-way.

*Color Codes

BWBright white

WWhite

SPSandpebble

BHBahama

HBLightbeige

PGClassicgrey

GGrey

Schluter®-DILEX-PHK - PVC

= H

r = 3/8"

= H

Schluter®-DILEX-PHK is a PVC, cove-shaped profile for inside wall corners, countertop/backsplash transitions and floor/wall transitions in applications where limited movement is expected. DILEX-PHK provides a 3/8" radius to prevent the accumulation of dirt and makes cleaning simple. DILEX-PHK prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, food processing plants, or any tiled environment where a sanitary cove base is desired.




Stainless steel (E) Brushed stainless steel (EB)

Item No.U = floor or wall, O - wall


Schluter Item No.


Schluter Item No.

951502507 EHKU7/O7 951502651 EBHKU7/O7951502527 EHKU9/O9 951502660 EBHKU9/O9951502539 EHKU11/O11 951502681 EBHKU11/O11

Outside corners, 90° 951500661 A/EHK2R18 100115393 A/EBHK2R18Outside corners, 135° 100115385 E135/EHK2R18 100115377 E135/EBHK2R18Inside corners, 90° (2-way) 951500660 I/EHK2R18 951500721 I/EBHK2R18Inside corners, 90° (3-way) 951500663 I/EHK3R18 951500723 I/EBHK3R18Inside corners, 135° 100115369 I135/EHK2R18 100115351 I135/EBHK2R18Connector 951500662 V/EHK 951500722 V/EBHKEnd cap Grey PVC only 951503048 E/HKW/G 951503048 E/HKW/G

= U

= O

r = 23/32"

U: 7 = 9/32" 9 = 11/32" 11 = 7/16" 16 = 5/8"

O: 7 = 9/32" 9 = 11/32" 11 = 7/16" 16 = 5/8"

Schluter®-DILEX-EHK - Stainless steelSchluter®-DILEX-EHK is a stainless steel cove-shaped profile for inside wall corners or for floor/wall transitions with strict hygienic requirements.


Outside corner (90º or 135º) Inside corner, 3-way (90º)Inside corner, 2-way (90º or 135º)

Connector End cap

Stainless steel 316 L (1.4404 = V4A) (EV4A)

Item No.U = floor or wall, O - wall


Schluter Item No.

951502563 EHKU7/O7/V4A951502575 EHKU9/O9/V4A951502598 EHKU11/O11/V4A951502619 EHKU16/O16/V4A




Schluter®-DILEX-HKU - Stainless steelSchluter®-DILEX-HKU is a stainless steel, cove-shaped profile for inside wall corners and floor/wall (including countertop/ backsplash) transitions. DILEX-HKU may be used with floor coverings other than ceramic and stone tile, provided the floor coverings are fastened or adhered (i.e., no floating floors). The profile features a single anchoring leg that turns inward, which allows the DILEX-HKU to be used with different thicknesses of tile. A 3/8" radius cove section forms the visible surface and prevents the accumulation of dirt, making cleaning simple. DILEX-HKU prevents surface water penetration and meets the maintenance and hygienic requirements of commercial kitchens, bathrooms, and food processing plants, or any tiled environment where a sanitary cove base is desired.


r = 3/8"

5/16"

3/4"

5/8"

5/16

"

Outside corner (90° or 135°) ConnectorInside corner (90° or 135°)

Note: DILEX-HKU outside and inside corners are made of stainless steel, 316 L (1.4404 = V4A).

Schluter®-DILEX-HKU (3/8" radius)


Stainless steel 316L (1.4404 = V4A) (E)


R = Radius Floor & Decor Item No.

Schluter Item No.


Schluter Item No.


Schluter Item No.

3/8 100115559 HKUR10E 100115583 HKUR10E/V4A 100115468 HKUR10EBOutside corners, 90°

100115542 EQ/HKUR10E 100115542 EQ/HKUR10E 100115534 EQ/HKUR10EB


100115526 E135/HKUR10E 100115526 E135/HKUR10E 100115575 E135/HKUR10EB

Inside corners, 90° (2 or 3-way)

100115518 I/HKU3R10E 100115518 I/HKU3R10E 100115450 I/HKU3R10EB


100115500 I135/HKUR10E 100115500 I135/HKUR10E 100115567 I135/HKUR10EB

Connector 100115484 V/HKUR10E 100115484 V/HKUR10E 100115476 V/HKUR10EB

r = 10 mm 5/8"

8 mm - 5/16"

19.5 mm - 3/4" 8 m

m -

5/1

6"

16 m

m -

5/8

"

r = 36 mm 1-7/16"

11 mm - 7/16"

48.6 mm - 1-29/32"

11 m

m -

7/1

6"

25 m

m -

1"

Schluter®-DILEX-HKU (1-7/16" radius)


R = Radius Floor & Decor Item No.

Schluter Item No.

1-7/16 100115427 HKUR36EOutside corners, 90°

100115443 E/HKUR36E

Inside corners, 90° (2 or 3-way)

100115435 I/HKU3R3610E

Connector 100115401 V/HKUR36E

End Cap 100115419 EK/HKUR36E (grey PVC only)

r = 10 mm 5/8"

8 mm - 5/16"

19.5 mm - 3/4" 8 m

m -

5/1

6"

16 m

m -

5/8

"

r = 36 mm 1-7/16"

11 mm - 7/16"

48.6 mm - 1-29/32"

11 m

m -

7/1

6"

25 m

m -

1"

r = 10 mm 5/8"

8 mm - 5/16"

19.5 mm - 3/4" 8 m

m -

5/1

6"

16 m

m -

5/8

"

r = 36 mm 1-7/16"

11 mm - 7/16"

48.6 mm - 1-29/32"

11 m

m -

7/1

6"

25 m

m -

1"

r =

10

mm

5/8"

8 m

m -

5/1

6"

19.5

mm

- 3

/4"

8 mm - 5/16"

16 mm - 5/8"

r =

36

mm

1-7/

16"

11 m

m -

7/1

6"

48.6

mm

- 1

-29/

32"

11 mm - 7/16"

25 mm - 1"

r = 10 mm 5/8"

8 mm - 5/16"

19.5 mm - 3/4" 8 m

m -

5/1

6"

16 m

m -

5/8

"

r = 36 mm 1-7/16"

11 mm - 7/16"

48.6 mm - 1-29/32"

11 m

m -

7/1

6"

25 m

m -

1"

r = 10 mm 5/8"

8 mm - 5/16"

19.5 mm - 3/4" 8 m

m -

5/1

6"

16 m

m -

5/8

"

r = 36 mm 1-7/16"

11 mm - 7/16"

48.6 mm - 1-29/32"

11 m

m -

7/1

6"

25 m

m -

1"

Schluter®-KERDI-BOARD


No minimum required. Please check your electronic catalog system for pricing.





Schluter®-KERDI-BOARDSchluter®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar.

1/2"

Substrate and building panel

H = in. Floor & Decor Item No.

Schluter Item No.

Panels /Bundle

Panel dimension: 48" x 32"1/2 951200271 KB121220812 18

Schluter®-KERDI-BOARD-SNSchluter®-KERDI-BOARD-SN is a prefabricated shower niche made of Schluter®-KERDI-BOARD that can be installed in both Schluter®-KERDI and Schluter®-KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" -wide integrated bonding flange and is available in 4 different sizes. Larger sizes include a prefabricated KERDI-BOARD shelf that can be installed at any height to create separate compartments within the shower niche if desired.

Niche


Schluter Item No. Size Depth Shelf

100119908 KB12SN305152A 12" x 6" 3-1/2" -100119890 KB12SN305305A 12" x 12" 3-1/2" -100007863 KB12SN305508A1 12" x 20" 3-1/2" 1100046416 KB12SN305711A1 12" x 28" 3-1/2" 1

Schluter®-KERDI-BOARD-ZT/-ZSSchluter®-KERDI-BOARD-ZT are galvanized steel washers used to fasten KERDI-BOARD to stud framing. They feature tabs that penetrate the surface of the KERDI-BOARD and temporarily hold the washers in place to enable quick installation of the corresponding screws.Schluter®-KERDI-BOARD-ZS are screws used to fasten KERDI-BOARD to stud framing with the corresponding washers.

Schluter®-KERDI-BOARD-ZT/-ZSWasher and Screw Set


Schluter Item No.

Pieces /Box

951200267 KBZS35GT32Z 40 each

1-1/4"

1-5/8"


U N C O U P L I N G M E M B R A N E S


Schluter®-TROBASchluter®-DITRA

H = 1/8"

Schluter®-DITRA and Schluter®-DITRA-XL are polyethylene uncoupling membranes with a grid structure of square cutback cavities and an anchoring fleece laminated to the underside. DITRA and DITRA-XL provide uncoupling through the open rib structure, which allows for in-plane movement that effectively neutralizes the differential movement stresses between the substrate and the tile, thus eliminating the major cause of cracking and delaminating of the tiled surface. Schluter®-DITRA is 1/8"-thick, which minimizes tile assembly thickness and reduces transitions to lower surface coverings (e.g., carpet, engineered wood, and vinyl). DITRA allows for ceramic tile application over single-layer plywood or OSB subfloors on joists spaced up to 19.2" o.c. DITRA is listed by cUPC®.

Schluter®-DITRA-XL is 5/16" thick, which permits even transitions between tile and 3/4"-thick hardwood flooring. DITRA-XL allows for ceramic tile application over single-layer plywood/OSB subfloors on joists spaced up to 24" o.c.


Schluter®-DITRA and Schluter®-DITRA-XL

H = 7 mm - 5/16"H = 7 mm - 5/16"H =

5/16"

Schluter®-DITRA Installation Handbook

The Schluter®-DITRA Installation Handbook contains complete details and illustrations for tile installations over various substrates, and supplementary information on topics such as waterproofing, movement joints, and thin-set mortars.

To obtain or download a free copy of the DITRA Installation Handbook, visit www.schluter.com or call 800-267-1923.

DITRA (1/8")


Schluter Item No. Dimensions

951502734 DITRA5M 3' 3" x 16' 5" = 54 ft2

951502992 DITRA150 3' 3" x 45' 9" = 150 ft2

951503017 DITRA30M 3' 3" x 98' 5" = 323 ft2

DITRA-XL (5/16")



951502999 DITRA-XL/175 3' 3" x 53' 3" = 175 ft2




Schluter®-DITRA-TROWEL Used to install the DITRA membrane, the DITRA-TROWEL features an 11/64" x 11/64" square-notched design.

Trowel


Schluter Item No. Notch Size Pkg

951501940 TRL-DIT 11/64" x 11/64" 1 unit

Schluter®-KERDI-FLEXSchluter®-KERDI-FLEX is a flexible waterproofing strip for sealing KERDI and DITRA seams over movement joints or flexible edge joints.


Waterproofing strip for use above movement joints


Schluter Item No. Width Length Thickness

951502141 FLEX125/5M 5" 16' 5" 12 mil951502489 FLEX250/5M 10" 16' 5" 12 mil951502983 FLEX125/30 5" 98' 5" 12 mil951502997 FLEX250/30 10" 98' 5" 12 mil

Schluter®-TROBASchluter®-TROBA is a reliable and durable sub-surface drainage system for use over horizontal waterproofing layers. It consists of a pressure-stable, polyethylene sheet with perforated studs, which enable the water to flow freely to the sloped waterproofing layer and on to the designated drainage exit.

(Technical data sheet available at schluter.com)H =

9/32"

Schluter®-TROBA-PLUSSchluter®-TROBA-PLUS is a durable subsurface drainage system that permits water to drain off freely and reliably. The closely positioned, cone-shaped studs are covered by a water permeable filter fabric. They serve to support the floor covering over the entire surface, thus creating a continuous drainage area above the waterproofing layer.

(Technical data sheet available at schluter.com)H =

5/16"

Sub-surface drainage system



951502998 TROBA-RO 3' 3" x 65' 7" = 215 ft2

951501475 TROBA-MA 3' 3" x 3' 3" = 10.73 ft2

Sub-surface drainage system



951502993 TROBA-PLUS8 3' 3" x 41' = 135 ft2




Uncoupling and waterproofing membrane


Schluter Item No. Dimensions Format

100067669 DH512M 3' 3" x 41' 1" = 134.5 ft2 Roll100056498 DH5MA 3' 3" x 2' 7" = 8.6 ft2 Sheet

1/4"(5.5 mm)

Schluter®-DITRA-HEAT is a polypropylene membrane with a cut-back stud structure and an anchoring fleece laminated to the underside. The thickness of the mat, including the stud structure is 1/4". The stud structure of DITRA-HEAT is specifically designed to secure DITRA-HEAT-E-HK electric floor heating cable in place. In addition, DITRA-HEAT integrates customizable, comfortable electric floor warming with the functions associated with DITRA: uncoupling, waterproofing, vapor management and support to ensure a long lasting installation.

For complete information, a step-by-step installation video and the DITRA-HEAT Installation Handbook are available for download at: www.schluter.com or by contacting Customer Service at 1-800-267-1923

Schluter®-DITRA-HEAT

D Schluter-Systems L.P., U.S. patent No. D706459, other patents pending.




• Do not purchase a heating cable the same size as the area to be tiled; this will be too much heating cable!

• Very important: Never CUT the heating cable. This would change the cable resistance and could lead to a fire.

• Install the heating cable at a spacing of 3 studs (3-1/2").

• Minimum spacing from walls or fixtures (e.g., cabinets) is 3".

• Minimum spacing from other heat sources (baseboard heaters, fireplaces, forced air heating ducts, etc.) is 8".

• Minimum spacing from any plumbing drain is 6".

• The heating cable section of the cable must be entirely installed under the floor covering. In order to prevent a fire hazard, do not install it anywhere else (e.g., in a wall).

• Never install heating cable under vanities, bathtub platforms, kitchen cabinets and islands or any other fixtures. Excessive heat could build up in these confined spaces and may cause a fire.

• It is helpful to plan the location of a buffer zone, as it is not possible to predict where the heating cable will end. The buffer zone is an area where heating is not essential, typically behind a toilet or adjacent to a door opening. This area allows for placement of excess heating cable.

• Heating cable testing is required while the heating cable is on the spool and at two subsequent steps during installation to ensure cable quality and for warranty purposes. A megohmmeter is required for the insulation resistance testing of the heating cables.

IMPORTANT Ordering Information for Schluter®-DITRA-HEAT Cables

Heating cable


Schluter Item No. Length Area Total Power Average Power

(Watts/ft2)Current(Amps)

120 V

100131507 DHEHK12011 35.3 ft 10.7 ft2 135 W 12.6 1.1100076538 DHEHK12016 52.9 ft 16.0 ft2 203 W 12.7 1.7100131531 DHEHK12021 70.5 ft 21.3 ft2 270 W 12.7 2.3100078674 DHEHK12027 88.2 ft 26.7 ft2 338 W 12.7 2.8100078690 DHEHK12032 105.8 ft 32.0 ft2 405 W 12.7 3.4100078682 DHEHK12038 124.1 ft 37.5 ft2 475 W 12.7 4100078708 DHEHK12043 141.1 ft 42.6 ft2 540 W 12.7 4.5100131549 DHEHK12051 169.8 ft 51.4 ft2 650 W 12.7 5.4100056514 DHEHK12064 212.9 ft 64.4 ft2 815 W 12.7 6.8100131556 DHEHK12073 240.2 ft 72.7 ft2 920 W 12.7 7.7100065689 DHEHK12083 275.5 ft 83.3 ft2 1055 W 12.7 8.8100078732 DHEHK12092 303.0 ft 91.7 ft2 1160 W 12.7 9.7100078724 DHEHK120102 336.9 ft 101.9 ft2 1290 W 12.7 10.7100131515 DHEHK120113 372.2 ft 112.6 ft2 1425 W 12.7 11.9100131523 DHEHK120134 444.0 ft 134.3 ft2 1700 W 12.7 14.2

BEFORE ordering heating cables, see IMPORTANT ordering information above.

Schluter®-DITRA-HEAT-E-HK are twisted pair heating cables designed for integration with the DITRA-HEAT uncoupling membrane in interior floor warming applications. The cables can be installed without returning to the thermostat and produce virtually zero electromagnetic fields.

Schluter®-DITRA-HEAT-E-HK

Each heating cable includes 1 floor temperature sensor compatible with the Schluter®-DITRA-HEAT-E-RS thermostat and features an approximately 7 ft long cold lead.

Heating cable repair kits are available. Please contact Customer Service for more information.




Each heating cable includes 1 floor temperature sensor compatible with the Schluter®-DITRA-HEAT-E-RS thermostat and features an approximately 7 ft long cold lead.

Heating cable repair kits are available. Please contact Customer Service for more information.

Heating cable


Schluter Item No. Length Area Total Power Average Power

(Watts/ft2)Current(Amps)

240 V

100131564 DHEHK24011 35.3 ft 10.7 ft2 135 W 12.6 0.6 100131598 DHEHK24016 53.1 ft 16.1 ft2 203 W 12.6 0.8 100078765 DHEHK24021 70.6 ft 21.4 ft2 270 W 12.6 1.1100131622 DHEHK24027 88.2 ft 26.7 ft2 338 W 12.6 1.4 100078757 DHEHK24032 105.8 ft 32.0 ft2 405 W 12.6 1.7100131630 DHEHK24038 124.1 ft 37.5 ft2 475 W 12.6 2.0 100131648 DHEHK24043 141.0 ft 42.6 ft2 540 W 12.6 2.3 100078740 DHEHK24053 176.3 ft 53.3 ft2 675 W 12.6 2.8100131655 DHEHK24064 211.6 ft 64.0 ft2 810 W 12.6 3.4 100071299 DHEHK24075 248.2 ft 75.1 ft2 950 W 12.6 4100131663 DHEHK24085 282.1 ft 85.3 ft2 1080 W 12.6 4.5 100131572 DHEHK240103 339.4 ft 102.7 ft2 1300 W 12.6 5.4 100061811 DHEHK240129 425.8 ft 128.8 ft2 1630 W 12.6 6.8100131580 DHEHK240145 480.5 ft 145.3 ft2 1840 W 12.6 7.7 100078773 DHEHK240167 551.0 ft 166.7 ft2 2110 W 12.6 8.8100131606 DHEHK240183 605.9 ft 183.3 ft2 2320 W 12.6 9.7 100067677 DHEHK240204 673.8 ft 203.8 ft2 2580 W 12.6 10.7100131614 DHEHK240225 744.4 ft 225.2 ft2 2850 W 12.6 11.9 100078716 DHEHK240269 888.0 ft 268.6 ft2 3400 W 12.6 14.2

BEFORE ordering heating cables, see IMPORTANT ordering information on page 90.




Non-programmable Programmable

Schluter®-DITRA-HEAT-E-RS Digital floor thermostat with remote sensor


Schluter Item No. Description

100078336 DHERS/BW Non-programmable thermostat with 1 floor temperature sensor in bright white100056506 DHERSD/BW Programmable thermostat with 1 floor temperature sensor in bright white

Schluter®-DITRA-HEAT-E-KITKit


Schluter Item No. Membrane Heating cable Thermostat

100078351 DHEK12040 5 sheets – 43.1 ft2 26.7 ft2 1 – white, programmable100078344 DHEK12056 7 sheets – 60.3 ft2 37.5 ft2 1 – white, programmable

Schluter®-DITRA-HEAT-E-RS are digital thermostats to control the DITRA-HEAT-E-HK heating cables (either 120 V or 240 V). The thermostats feature a 5 mA built-in ground fault circuit interrupter (GFCI) with indicator light. The DITRA-HEAT-E-RS thermostats have an electrical current limit of 16 amps. A floor temperature sensor is included. The programmable version features more than 250 pre-set programs and anticipated start function. The non-programmable version features simple on/off and a smart mode which acts like a programmable thermostat by automatically lowering the temperature once per 24 hour period.

Schluter®-DITRA-HEAT-E-RS

Schluter®-DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, heating cable, and programmable thermostat.

Schluter®-DITRA-HEAT-E-KIT


S H O W E R S Y S T E M

Schluter®-KERDI-DRAINSchluter®-KERDI-LINE

Schluter®-KERDI-TROWEL Used to install the Schluter®-KERDI membrane, the KERDI-TROWEL features a 1/8” x 1/8” square-notched design.

Note: 1 mil = one thousandth of an inch

Schluter®-KERDISchluter®-KERDI is a polyethylene, waterproofing membrane, equipped with an anchoring fleece on both sides. It is suitable for waterproofing in conjunction with tiled surfaces on walls and floors. Schluter®-KERDI is listed by cUPC® and evaluated by ICC-ES (Report No. ESR-2467).


H = 8 mil

KERDI (8 mil)



951502756 KERDI200/5M 3' 3" x 16' 5" = 54 ft2

951502986 KERDI200/10M 3' 3" x 33' = 108 ft2

951503002 KERDI200/20M 3' 3" x 65' 7" = 215 ft2

951503028 KERDI200 3' 3" x 98' 5" = 323 ft2

Trowel


Schluter Item No. Notch Size Pkg

951501939 TRL-KER 1/8" x 1/8" 1 unit

Schluter®-SHOWER SYSTEM Installation Handbook

The Schluter®-SHOWER SYSTEM Installation Handbook contains complete details and illustrations for various tiled shower applications, and supplementary information on topics such as vapor (including steam showers and bathtub surrounds), mold, barrier-free showers, profiles, and thin-set mortars.

To obtain or download a free copy of the SHOWER SYSTEM Installation Handbook, visit www.schluter.com or call 800-267-1923.





Schluter®-KERDI-BANDSchluter®-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with the KERDI and DITRA mattings.


Waterproofing strip


Schluter Item No. Width Length Thickness

951501671 KEBA100/125/5M 5" 16' 5" 4 mil951502269 KEBA100/125/10M 5" 33' 4 mil951501948 KEBA100/185/5M 7-1/4" 16' 5" 4 mil951502104 KEBA100/250/5M 10" 16' 5" 4 mil951502772 KEBA100/125 5" 98' 5" 4 mil951502962 KEBA100/185 7-1/4" 98' 5" 4 mil951502984 KEBA100/250 10" 98' 5" 4 mil


Schluter®-KERDI-KERECK-FSchluter®-KERDI-KERECK-F are preformed corners made of KERDI for waterproofing inside and outside corners.


Waterproofing for corners


Schluter Item No. Thickness Packaging

951500726 KERECK/FI2 4 mil 2 Inside corners951500990 KERECK/FA2 4 mil 2 Outside corners951502329 KERECK/FI10 4 mil 10 Inside corners951502591 KERECK/FA10 4 mil 10 Outside corners

Inside corner (FI) Outside corner (FA)

Schluter®-KERDI-KERS-BSchluter®-KERDI-KERS-B are preformed, seamless corners for waterproofing 135° angles between triangular shower benches and walls or the tops of curbs in neo-angle shower applications.

Note: 1 mil = 1 one-thousandth of an inch

Waterproofing corners

Item No. Item No. Thickness Description Packaging

951500726 KERECK135FI2 4 mil Inside corner, 135° 2 units100112333 KERECK135FI10 4 mil Inside corner, 135° 10 units100112382 KERSB135KLR 4 mil Bench corners 1 right and 1 left100112390 KERSB135K5LR 4 mil Bench corners 5 right and 5 left

100112408 KERSB135K 4 mil Bench/ neo-angle corner kit 1 right and 1 left bench corner, and 2 135° inside corners

Inside corner, 135°

Bench corner




Schluter®-KERDI-SEAL-PS/-MV

Schluter®-KERDI-SEAL-PS/-MV prefabricated seals with overmolded rubber gaskets are cut sections of the Schluter®-KERDI waterproofing membrane designed to seal protrusions through the Schluter®-KERDI or Schluter®-DITRA/DITRA-XL membranes.

(Technical data sheet available at schluter.com) -PS -MV


KERDI-SEAL-PS - Pipe seal


Schluter Item No.

Pipe nipple opening diam. Thickness

951500696 KMS185/12 1/2" 4 mil951500697 KMS185/20 3/4" 4 mil

KERDI-SEAL-MV - Mixing valve seal


Schluter Item No.

Mixing valve opening diam. Thickness

951502634 KMSMV235/114 4-1/2" 4 mil


Schluter®-KERDI-KMSchluter®-KERDI-KM is a is a pipe collar designed to be used in conjunction with the Schluter®

-KERDI or Schluter®-DITRA mattings to seal around pipes or other similar elements that penetrate the waterproofing layer.


Pipe seal


Schluter Item No. Dimensions Thickness Packaging

951500718 KM5117/22 7" x 7"(Pipe nipple opening diam. - 7/8") 4 mil 5 units

BWBrightwhite

GGrey

*Color Codes

Schluter®-KERDI-FIXSchluter®-KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. Schluter®-KERDI-FIX is suitable for the bonding of Schluter®-KERDI waterproofing membrane in overlapping areas and at connections to building elements. Schluter®-KERDI-FIX is also suitable for sealing or as a joint filing compound.

Cartridge (290 ml)


Schluter Item No.


Schluter Item No.

951501861 KERDIFIX/BW 951200269 KERDIFIX/G


Schluter®-KERDI-KERSSchluter®-KERDI-KERS are preformed, seamless corners made of KERDI for waterproofing floor/wall/shower base connections in curbless shower applications where the KERDI-LINE linear drain is installed adjacent to the wall.


Waterproofing for corners


Schluter Item No. Thickness Packaging

100112341 KERS20L 4 mil Left inside corner - 20 mm100112358 KERS28L 4 mil Left inside corner - 28 mm100112366 KERS20R 4 mil Right inside corner - 20 mm100112374 KERS28R 4 mil Right inside corner - 28 mm

Left corner (L) Right corner (R)




Schluter®-KERDI-DRAIN is a floor drain with an integrated bonding flange that provides a large contact area for a secure connection to the Schluter®-KERDI waterproofing membrane, as well as other bonded waterproof membranes, at the top of the assembly. KERDI-DRAIN is appropriate for both mortar bed and Schluter®-KERDI-SHOWER-ST shower tray applications. The bonding flange is sloped to simplify mortar bed installation. KERDI-DRAIN features a fully adjustable grate (available in stainless steel and anodized aluminum in various finishes) that accommodates a wide range of tile thicknesses: 1/4” to 1-1/4”. The grate assembly allows lateral and tilt adjustment as well. Simple connection to standard 2” drain outlets makes KERDI-DRAIN ideal for new construction and renovations. KERDI-DRAIN is listed by UPC®, CSA, and NSF.


Schluter®-KERDI-DRAIN

Subfloor

Mortar bed orKERDI SHOWER-ST tray Tile

KERDI MEMBRANE

Note: Phillips head screws are included with the KERDI-DRAIN. If you require tamper-proof screws, they must be purchased seperately.

Tamper proof screws


Schluter Item No. Description

951500394 KD/TPSCRW Tamper proof screw951500814 KD/TPWRCH Wrench

4" Grate Options

Tileable Covering Support Anodized Aluminum Stainless Steel

Brushed nickel(ATGB)

Brushed copper/bronze(AKGB)

Brushed brass(AMGB)

Stainless steel (E)

Oil-rubbedbronze(EOB)

Flange Options

ABS - 2" or 3" Outlet PVC - 2" or 3" Outlet

6" Grate Options

Stainless Steel

Note: Please reference the ordering tables for drain assemblies that have listings with UPC®, CSA, and NSF.

Note: Please reference page 97-99 for model numbers.

(6E) (6RE)

Patent pending

3-15/16"

3-3/8"

1/4" 3/4"

5-1/2"

3-11/16"

11-13/16"

4-1/16"

4-5/16"

2-5/8"

1-9/16"7/8"

1

3

4

3-7/8"

2 3-5/8"

2-15/16"

1-7/16"

Grate

Height adjustment collar

Lateral adjustment collar

Fleeced bonding flange

2

3

4

1

(ECS)




2" Drain Outlet

Grate finish Floor & Decor Item No.ABS - 2"

Schluter Item No.ABS - 2"

Floor & Decor Item No.PVC - 2"

Schluter Item No.PVC - 2"

4" Square GrateTileable covering support (ECS)* 100046408 KD2/ABS/ECS2 100112325 KD2/PVC/ECS2

Stainless steel(E) 951502929 KD2/ABS/E1 951502931 KD2/PVC/E1

Oil-rubbed bronze stainless steel (EOB) 951502967 KD2/ABS/EOB 951502968 KD2/PVC/EOB

Brushed brassanod. alu. (AMGB) 951502977 KD2/ABS/AMGB1 951502969 KD2/PVC/AMGB1

Brushed copper/ bronzeanod. alu. (AKGB) 951502976 KD2/ABS/AKGB1 951502975 KD2/PVC/AKGB1

Brushed nickelanod. alu. (ATGB) 951502978 KD2/ABS/ATGB1 951502974 KD2/PVC/ATGB1

6" Square or Round GrateSquare grate

stainless steel (6E) 951502964 KD2/ABS/6E1 951502965 KD2/PVC/6E1

Round gratestainless steel (6RE) 951502963 KD2/ABS/6RE1 951502966 KD2/PVC/6RE1

3" Drain Outlet

Grate finish Floor & Decor Item No.ABS - 3"

Schluter Item No.ABS - 3"

Floor & Decor Item No.PVC - 3"

Schluter Item No.PVC - 3"

6" Square or Round GrateSquare grate

stainless steel (6E) 951502980 KD3/ABS/6E1 951502981 KD3/PVC/6E1

Round gratestainless steel (6RE) 951502979 KD3/ABS/6RE1 951502982 KD3/PVC/6RE1

Schluter®-KERDI-DRAIN - Components - ABS or PVC Flange

Includes Description Quantity

KERDI-DRAIN Drain, with integrated bonding flange and grate assembly 1

KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outside

KERDI-SEAL-PS Pipe seal (3/4") 1

KERDI-SEAL-MV Mixing valve seal 1

1

2

3

4

1

432

1 Listed by UPC®, CSA, and NSF. 2 Listed by NSF and CSA. UPC listing in progress, please check www.schluter.com for the most up-to-date information.* Patent pending

DRAIN KITS - ABS or PVC FLANGE - 2" OR 3" OUTLET




Grate Kits

Finish Floor & Decor Item No.

Schluter Item No.

4" Square Grate

Tileable covering support (ECS)* 100112291 KD2/ECS/GR

Stainless steel (E) 100112275 KD2/E/GR

Oil-rubbed bronze stainless steel (EOB) 100112283 KD2/EOB/GR

Brushed brass anod. alu. (AMGB) 100112242 KD2/AMGB/GRBrushed copper/ bronze anod. alu.

(AKGB) 100112259 KD2/AKGB/GR

Brushed nickel anod. alu. (ATGB) 100112267 KD2/ATGB/GR

6" Square or Round Grate

Square grate stainless steel (6E) 100112309 KD2/6E/GR

Round grate stainless steel (6RE) 100112317 KD2/6RE/GR

Grate Kit - Components


Grate Assembly a) For stainless steel and aluminum grates1

b) For tileable covering support




2

3

4

1a

432

Flange Kits

Material Floor & Decor Item No.

Schluter Item No.

2" Drain Outlet

ABS 100112200 KD2/ABS/FL

PVC 100112226 KD2/PVC/FL

3" Drain Outlet

ABS 100112218 KD3/ABS/FL

PVC 100112234 KD3/PVC/FL

Flange Kit - Components

Includes Quantity

Drain with integrated bonding flange 1

GRATE & FLANGE KITS (sold separately)

1b

1a 1b

iPlease note that flanges with 3" outlets are intended for use with 6" grates as these combinations have listings and certifications while flanges with 3" outlet combined with 4" grates do not. Please refer to the table below.

Patent pending

Product Listings and Certifications Table

Schluter®-KERDI-DRAIN - Listings and Certifications

Bonding Flange 2" OutletGrate - 4" Grate - 6"

E EOB AMGB AKGB ATGB ECS* 6E 6RE

ABS / PVC 1 - 1 1 1 2 1 1Stainless steel 1 - 1 1 1 2 1 1

Bonding Flange 3" OutletGrate - 6"

6E 6RE

ABS / PVC 1 1Stainless steel 1 1

Various configurations of KERDI-DRAIN are listed by UPC®, CSA, and NSF as shown in the table above. 1 - Listed by UPC®, CSA, and NSF2 - Listed by CSA* Patent pendingFor copies of these documents, please contact Schluter®-Systems at 800-472-4588 (USA) or 800-667-8746 (Canada) or by email at [email protected]. Links to the documents can also be accessed at www.schluter.com.




with residential adaptor ring

The residential adaptor ring is used to convert a traditional residential clamping ring drain to an integrated bonding flange drain when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX. The bonding flange then slides into the adaptor ring and seals against the rubber gasket. The KERDI-DRAIN with residential adaptor ring features an ABS bonding flange and is suitable for both mortar bed and Schluter®-KERDI-SHOWER-ST shower tray applications.

Schluter®-KERDI-DRAIN

Residential Adaptor Kits - ABS Flange

Grate finish Floor & Decor items No.ABS Bonding FLange

Schluter Item No.ABS bonding flange

4" Square GrateStainless steel

(E) 951502930 KDAR/ABS/E

Oil-rubbed bronze stainless steel (EOB) 951502973 KDAR/ABS/EOB

Brushed brassanod. alu. (AMGB) 951502971 KDAR/ABS/AMGB

Brushed copper/ bronzeanod. alu. (AKGB) 951502972 KDAR/ABS/AKGB

Brushed nickelanod. alu. (ATGB) 951502970 KDAR/ABS/ATGB

Schluter®-KERDI-DRAIN with residential adaptor ring and ABS flange


KERDI-DRAINDrain, with integrated bonding flange and grate assembly

1

Adaptor ring* For residential clamping ring drains 1




KERDI-FIX Sealing and bonding compound (66 ml) 1

1

2

3

4

1

43

2

6

5

* D Schluter-Systems L.P., U.S. patent No. D593,641, other patents pending

KERDI-DRAIN WITH RESIDENTIAL ADAPTOR RING - standard ABS bonding flange

6

5




Schluter®-KERDI-SHOWER-STSchluter®-KERDI-SHOWER-ST is a sloped shower tray made of lightweight, expanded polystyrene (PS 40) for constructing mortar-free shower receptors. It is specifically designed to integrate with the Schluter®-KERDI-SHOWER-SC, KERDI, and KERDI-DRAIN.

Schluter®-KERDI-SHOWER-SCSchluter®-KERDI-SHOWER-SC is a lightweight, expanded polystyrene (PS 40) shower curb specifically designed to integrate with Schluter®-KERDI-SHOWER-ST, KERDI, and KERDI-DRAIN.

Schluter®-KERDI-SHOWER-SRSchluter®-KERDI-SHOWER-SR is a lightweight, expanded polystyrene (PS 40) shower ramp specifically designed to integrate with Schluter®-KERDI-SHOWER-ST, KERDI, and KERDI-DRAIN.

Prefabricated EPS tray


Schluter Item No. Dimensions Perimeter height Drain placement

951502596 ST122 48" x 48" 1-1/2" center951502985 ST-183 72" x 72" 1-1/2" center951502658 ST-81/152 32" x 60" 1-3/4" center951502747 ST-81/152BR 32" x 60" 1-1/2" off-center

Prefabricated EPS curb



951502445 SC122 48" x 6" x 4-1/2"

Prefabricated EPS ramp



951502444 SR122 48" x 15-7/8"

Note: Tray ST-81/152 BR features off-center drain placement: 10" o.c. from end of tray.

48" x 48"

ST-122

32" x 60"

ST-81/152

32" x 60"

ST-81/152 BR

72" x 72"

ST-183

48"

6"

6"

4-1/2"

1-1/2"1/4"

15-13/16"

15-7/8"




Schluter®-KERDI-SHOWER-SBSchluter®-KERDI-SHOWER-SB are lightweight, expanded polystyrene shower benches specifically designed to integrate with the Schluter®-Shower System. They are stable and load bearing, feature sloped surfaces, and are quick and easy to install.

20

16 16

19-13/16

BENCH TRIANGLE 16in. x 16in.

SB4116" 16"

20"19-13/16"

11-1/2

32

20

19-13/16

BENCH 11-1/2in. x 32in.

SB2981

19-13/16"

20"

11-1/2"

32"

20

11-1/2

48

19-13/16

BENCH 11-1/2in. x 48in.

SB29122

19-13/16"

20"

11-1/2"

48"

20

16

32

19-3/4

BENCH 16in. x 32in.

SB4181

19-3/4"

20"

16"32"

20

16

48

19-3/4

BENCH 16in. x 48in.

SB41122

19-3/4"

20"

16"

48"

Prefabricated EPS bench


Schluter Item No. Width Depth Height Shape

951502797 SB41 16" 16" 20" Triangular951502987 SB2981 32" 11-1/2" 20" Rectangular951502994 SB29107 42" 11-1/2" 20" Rectangular951502996 SB29122 48" 11-1/2" 20" Rectangular951502995 SB4181 32" 16" 20" Rectangular951503001 SB41122 48" 16" 20" Rectangular

20

11-1/2

42

19-13/16

BENCH 11-1/2n. x 42in.

SB29107

19-13/16"

20"20"

42"

11-1/2"

Schluter®-KERDI-BOARD-SNSchluter®-KERDI-BOARD-SN is a prefabricated shower niche made of Schluter®-KERDI-BOARD that can be installed in both Schluter®-KERDI and Schluter®-KERDI-BOARD wall assemblies. The shower niche features a 1/2" -thick by 2" -wide integrated bonding flange and is available in 4 different sizes. Larger sizes include a prefabricated KERDI-BOARD shelf that can be installed at any height to create separate compartments within the shower niche if desired.

Niche


Schluter Item No. Size Depth Shelf

100119908 KB12SN305152A 12" x 6" 3-1/2" -100119890 KB12SN305305A 12" x 12" 3-1/2" -100007863 KB12SN305508A1 12" x 20" 3-1/2" 1100046416 KB12SN305711A1 12" x 28" 3-1/2" 1




Schluter®-KERDI-SHOWER-KIT is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free, watertight shower assembly without a mortar bed.

Complete installation instructions are available at www.schluter.com

2

1

4

3

5

Schluter®-KERDI-SHOWER-KIT

6

3

4

7

5

1

2

66

8

9

KERDI-SHOWER-ST Prefabricated, sloped tray

KERDI-SHOWER-SC Prefabricated curb

KERDI Waterproofing membrane

KERDI-BAND Waterproofing strip

KERDI-DRAIN Floor drain with a sloped, integrated bonding flange, 2” outlet, 4” grate

KERDI-KERECK-F Pre-formed waterproofing corners

KERDI-SEAL-PS Pipe seal

KERDI-SEAL-MV Mixing valve seal

Schluter®-EHK/-HKW/-AHK Cove-base profile (optional)

1

2

3

4

5

6

7

8

9

7 8


Includes DescriptionQuantity

48" x 48" 72" x 72" 32" x 60"

KERDI-SHOWER-ST Shower Tray 1 1 1KERDI-SHOWER-SC Shower Curb 48" x 6" x 4-1/2" 1 2 2KERDI 10 M Waterproofing membrane 3' 3" x 33' = 108 ft2 1KERDI 12 M Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 1KERDI 20 M Waterproofing membrane 3' 3" x 65' 7" = 215 ft2 1KERDI-BAND Waterproofing strip 5" x 33' 1 2 1KERDI-DRAIN Drain, with integrated bonding flange with 2" outlet 1 1 1KERDI-KERECK-F Preformed waterproofing corners 4 inside and 2 outsideKERDI-SEAL-PS Pipe seal (3/4") 1KERDI-SEAL-MV Mixing valve seal 1

1

2

3

4

5

6

7

8




48"

48"

72"

72"

72" x 72" Kit - Select material for drain (ABS or PVC) and grate finish

Floor & Decor Item No. Item No. Drain

Material Grate finish

100126630 KK183ABSECS ABS Tileable covering support*951503038 KK183ABSE ABS Stainless steel 304 (1.4301 = V2A)951503040 KK183ABSEOB ABS Oil-rubbed bronze stainless steel951503043 KK183ABSATGB ABS Brushed nickel anodized aluminum951503045 KK183ABSAKGB ABS Brushed copper/bronze anod. alu.951503044 KK183ABSAMGB ABS Brushed brass anodized aluminum100126648 KK183PVCECS PVC Tileable covering support*951503039 KK183PVCE PVC Stainless steel 304 (1.4301 = V2A) 951503041 KK183PVCEOB PVC Oil-rubbed bronze stainless steel951503042 KK183PVCATGB PVC Brushed nickel anodized aluminum951503046 KK183PVCAKGB PVC Brushed copper/bronze anod. alu.951503047 KK183PVCAMGB PVC Brushed brass anodized aluminum




100126614 KK122ABSECS ABS Tileable covering support* 951503005 KK122ABSE ABS Stainless steel 304 (1.4301 = V2A)951503007 KK122ABSEOB ABS Oil-rubbed bronze stainless steel951503009 KK122ABSATGB ABS Brushed nickel anodized aluminum951503013 KK122ABSAKGB ABS Brushed copper/bronze anod. alu.951503011 KK122ABSAMGB ABS Brushed brass anodized aluminum100126622 KK122PVCECS PVC Tileable covering support* 951503006 KK122PVCE PVC Stainless steel 304 (1.4301 = V2A) 951503008 KK122PVCEOB PVC Oil-rubbed bronze stainless steel951503010 KK122PVCATGB PVC Brushed nickel anodized aluminum951503014 KK122PVCAKGB PVC Brushed copper/bronze anod. alu.951503012 KK122PVCAMGB PVC Brushed brass anodized aluminum

* Patent pending

60"

32"




100126572 KK81152ABSECS ABS Tileable covering support*951503015 KK81152ABSE ABS Stainless steel 304 (1.4301 = V2A)951503018 KK81152ABSEOB ABS Oil-rubbed bronze stainless steel951503025 KK81152ABSATGB ABS Brushed nickel anodized aluminum951503023 KK81152ABSAKGB ABS Brushed copper/bronze anod. alu.951503024 KK81152ABSAMGB ABS Brushed brass anodized aluminum100126606 KK81152PVCECS PVC Tileable covering support*951503016 KK81152PVCE PVC Stainless steel 304 (1.4301 = V2A) 951503019 KK81152PVCEOB PVC Oil-rubbed bronze stainless steel951503020 KK81152PVCATGB PVC Brushed nickel anodized aluminum951503022 KK81152PVCAKGB PVC Brushed copper/bronze anod. alu.951503021 KK81152PVCAMGB PVC Brushed brass anodized aluminum




Schluter®-KERDI-SHOWER-KIT without the drain is a kit containing the same components as the complete KERDI-SHOWER-KIT, with the exception of the KERDI-DRAIN which must be purchased separately (see pages 96-99). This kit allows you to select the drain that is best suited to your application (i.e. KERDI-DRAIN with 3" outlet or KERDI-DRAIN with residential adaptor ring).

Complete installation instructions are available at www.schluter.com

Schluter®-KERDI-SHOWER-KIT without the drain

2

1

4

3

60"

32"

Note: Tray features off-center drain placement: 10" o.c. from end of tray.

32" x 60" Kit with off-center drain - Select material for drain (ABS or PVC) and grate finish



100126580 KKB81152ABSECS ABS Tileable covering support*951503026 KKB81152ABSE ABS Stainless steel 304 (1.4301 = V2A)951503029 KKB81152ABSEOB ABS Oil-rubbed bronze stainless steel951503030 KKB81152ABSATGB ABS Brushed nickel anodized aluminum951503035 KKB81152ABSAKGB ABS Brushed copper/bronze anod. alu.951503032 KKB81152ABSAMGB ABS Brushed brass anodized aluminum100126598 KKB81152PVCECS PVC Tileable covering support*951503027 KKB81152PVCE PVC Stainless steel 304 (1.4301 = V2A) 951503033 KKB81152PVCEOB PVC Oil-rubbed bronze stainless steel951503031 KKB81152PVCATGB PVC Brushed nickel anodized aluminum951503036 KKB81152PVCAKGB PVC Brushed copper/bronze anod. alu.951503034 KKB81152PVCAMGB PVC Brushed brass anodized aluminum

Tray size Floor & Decor Item No.

Schluter Item No.

48" x 48" 951503000 KK12272" x 72" 951503037 KK18332" x 60" 951503003 KK8115232" x 60" off-center drain 951503004 KKB81152


Includes DescriptionQuantity

48" x 48" 72" x 72" 32" x 60"

KERDI-SHOWER-ST Shower Tray 1 1 1KERDI-SHOWER-SC Shower Curb 48" x 6" x 4-1/2" 1 2 2KERDI 10 M Waterproofing membrane 3' 3" x 33' = 108 ft2 1KERDI 12 M Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 1KERDI 20 M Waterproofing membrane 3' 3" x 65' 7" = 215 ft2 1KERDI-BAND Waterproofing strip 5" x 33' 1 2 1

1

2

3

4

* Patent pending



1

2

3

4

A. Channel body with Schluter®-KERDI waterproofing collar

B. Channel support

C. No-hub coupling (included)

A

B

C

Choose your channel body

• Formed stainless steel channel body with 2" no-hub outlet (coupling included)

• Foam channel support sets the drain flush with shower tray

• Integrated bonding flange with Schluter®-KERDI collar ensures a simple and secure connection to the bonded waterproofing assembly

1

KERDI-LINE components

Covering Support D: Frameless tileablesuitable for coverings of any thickness

Choose your grate assembly

• Lengths ranging from 20" to 72" nom.

• Two grate frames accommodate 1/8" to 1" -thick tiles

2

3/4" framefor coverings with thicknesses from 1/8" to 9/16"

1-3/16" framefor coverings with thicknesses from 1/2" to 1"

Grate A: Closed design

Grate B: Perforated

• Choose your sloped shower tray (please refer to page 108)

• Available for wall or intermediate drain placement in two sizes: 39" x 39" or 55" x 55"

• Schluter®-KERDI waterproofing membrane laminated to the surface

• Choose shower profiles (please refer to page 108-110)

• Elegant solutions for finishing area between shower base and first course of wall tile in applications incorporating KERDI-LINE

• The SHOWERPROFILE-S tapered profile matches the slope of the shower tray and eliminates angled cuts to simplify tile installation

• The SHOWERPROFILE-R two-part wall transition profile is adjusted to cover the exposed area where KERDI-LINE is installed adjacent to the wall

• Two brushed stainless steel design grate options: closed design or square perforations

• Frameless tileable covering support provides virtually invisible drainage; suitable for any thickness tile

There are multiple selections to be made for the KERDI-LINE. Start by selecting the appropriate flange length then proceed to grate selection accordingly, keeping in mind there are two frame heights with two grate options (A or B), and

a frameless option (D). - Please refer to page 106-107 for sizes and ordering information.

Schluter®-KERDI-LINE

4

3




Schluter®-KERDI-LINEThe Schluter®-KERDI-LINE is a low profile linear floor drain specifically designed for bonded waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at intermediate locations in showers, wet rooms, and other applications that require waterproofing and drainage. The floor can be sloped on a single plane to KERDI-LINE, which enables the use of large-format tiles and creates interesting design opportunities.

The KERDI-LINE channel body is made of formed stainless steel and features a collar made of Schluter®-KERDI for a secure waterproof connection. The grate assembly is available in three design options:

A - brushed stainless steel frame and closed-design grateB - brushed stainless steel frame and perforated grateD - frameless, tileable covering support

Grate and frame assemblies (A and B) can be adjusted for use with tile coverings from 1/8" to 1" -thick, while the tileable covering support can accommodate any thickness of tile covering.

Note: There are multiple selections to be made for this product. Begin by selecting the appropriate flange length then proceed to grate selection accordingly, keeping in mind there are two frame height options and three grate options.

Channel body - stainless steel - center

L = in.(inside dimension)

L1= in.(outside dimension)


Schluter Item No.

20 22 951200278 KLV60E5024 26 100062322 KLV60E6028 30 100040260 KLV60E7032 34 951503068 KLV60E8036 38 951200280 KLV60E9040 42 100054527 KLV60E10044 46 100048537 KLV60E11048 50 951400177 KLV60E12052 54 100095165 KLV60E13056 58 100056563 KLV60E14060 62 100084383 KLV60E15064 66 100054543 KLV60E16068 70 100126556 KLV60E17072 74 100039189 KLV60E180

4-23/32"

2-1/4"7/8" 7/8"

15/16"

5-15/32"

2-1/4"7/8" 7/8"

15/16"

Intermediate placement

Wall placement

= L (inside dimension)

= L1 (outside diemnsion)

8"

Schluter®-KERDI-LINE grate assembly contents

Includes Description

Grate3 design options: Closed-design, perforated, or frameless tileable.

Grate frameGrate frame with height adjustment spacers (not required for frameless tileable grate)

KERDI-KERECK-FPreformed waterproofing corners(4 inside and 2 outside)

KERDI-SEAL-PS 1 Pipe seal (3/4")

KERDI-SEAL-MV 1 Mixing valve seal

1

2

3

443

5

5

1

2

Schluter®-KERDI-LINE channel body contents

Includes Description

Channel bodyCenter or off-set outlet, with channel support and no-hub coupling.

Channel body - stainless steel - off-set outlet

L = in. L1= in. Floor & Decor Item No. Item No.

28 30 100126440 KLVO60E7032 34 100095355 KLVO60E8036 38 100126465 KLVO60E9040 42 100126481 KLVO60E10044 46 100126515 KLVO60E11048 50 100126531 KLVO60E120

Listed by ICC-ES (Report No PMG-1204), UPC®, CSA, and NSF.

= L (inside dimension)

= L1 (outside diemnsion)



Grate assembly - Closed (A) and Perforated (B) - Brushed stainless steel

3/4" frame height for 1/8" to 9/16" -thick coverings

Length = in.

Closed (A) Perforated (B)


Item No. Item No.

20 100112556 KLAR19EB50 951200277 KLB19EB5024 100095371 KLAR19EB60 100062314 KLB19EB6028 100101914 KLAR19EB70 100126457 KLB19EB7032 951503074 KLAR19EB80 100053735 KLB19EB8036 100029479 KLAR19EB90 100114636 KLB19EB9040 100112564 KLAR19EB100 100054535 KLB19EB10044 100112572 KLAR19EB110 100048529 KLB19EB11048 100112580 KLAR19EB120 100007905 KLB19EB12052 100112598 KLAR19EB130 100112606 KLB19EB13056 100112622 KLAR19EB140 100056571 KLB19EB14060 100084367 KLAR19EB150 100084375 KLB19EB15064 100054550 KLAR19EB160 100112630 KLB19EB16068 100112655 KLAR19EB170 100112663 KLB19EB17072 100039197 KLAR19EB180 100039205 KLB19EB180

1-1/8" frame height for 1/2" to 1" -thick coverings

20 100112416 KLAR30EB50 100112499 KLB30EB5024 100112424 KLAR30EB60 100112507 KLB30EB6028 100112432 KLAR30EB70 100112515 KLB30EB7032 100112440 KLAR30EB80 100092188 KLB30EB8036 100112457 KLAR30EB90 100112523 KLB30EB9040 100112465 KLAR30EB100 100112531 KLB30EB10044 100112473 KLAR30EB110 100112549 KLB30EB11048 100112481 KLAR30EB120 100106400 KLB30EB120

2"

Frameless Tileable (D) Patent pending

= H

3/8"

1-27/32"

2-29/32"Closed (A)

= H

3/8"

2-1/8"

2-29/32"

Perforated (B)

Grate assemblies - Frameless Tileable (D) - Stainless steel

Length = in.

Frameless Tileable (D) - Patent pending


Item No. Item No.

For use with channel body with center outlet

For use with channel body with off-set outlet

20 100126424 KLDRE50 - -24 100070747 KLDRE60 - -28 100040252 KLDRE70 100126432 KLDROE7032 951503067 KLDRE80 100095363 KLDROE8036 951200279 KLDRE90 100126473 KLDROE9040 100126499 KLDRE100 100126507 KLDROE10044 100061803 KLDRE110 100126523 KLDROE11048 953400164 KLDRE120 100126549 KLDROE12052 100112614 KLDRE130 - -56 100080506 KLDRE140 - -60 100084391 KLDRE150 - -64 100112648 KLDRE160 - -68 100112671 KLDRE170 - -72 100039213 KLDRE180 - -

Schluter®-KERDI-LINE




SHOWERPROFILE-SA - Two-part tapered edging profile - Brushed stainless steel


Schluter Item No. H1 = in. H2 = in.

L = 47-1/4" 3/16 951503071 SPSA50EB/120 1/4 1-3/16

L = 63" 3/16 100127489 SPSA50EB/160 1/4 1-1/2

L = 78-3/4"3/16 100127497 SPSA50EB/200 1/4 1-13/16

Schluter®-SHOWERPROFILE-SB - Two-part tapered edging profile - Brushed stainless steel


Schluter Item No. H1 = in. H2 = in.

L = 47-1/4"3/8 100127513 SPSB100EB/120 3/8 1-11/321/2 100087915 SPSB125EB/120 3/8 1-11/32

L = 63" 3/8 100127521 SPSB100EB/160 3/8 1-21/321/2 100087923 SPSB125EB/160 3/8 1-21/32

L = 78-3/4"3/8 100127539 SPSB100EB/200 3/8 2 1/2 100127505 SPSB125EB/200 3/8 2

= H1

= L

2%= H2

H = 3/16" or

3/8"H = 1/2"

3/8"

KERDI-SHOWER-LS - Shower tray - wall drain placement


Schluter Item No. Dimensions End height

100088988 KSL1000S 39" x 39" 1-21/32"953400165 KSL1400S 55" x 55" 2"

KERDI-SHOWER-L - Shower tray - center drain placement


Schluter Item No. Dimensions End height

100126564 KSL1000 39" x 39" 1-1/4"100056431 KSL1400 55" x 55" 1-13/32"

Schluter®-KERDI-SHOWER-L/-LSThe KERDI-SHOWER-L/-LS are polystyrene sloped trays with integrated Schluter®-KERDI waterproofing. The KERDI-SHOWER-L allows for the installation of a center drain whereas the KERDI-SHOWER-LS accommodates the installation of the drain along the perimeter of the shower.

Schluter®-SHOWERPROFILE-SThe SHOWERPROFILE-S is a two-part profile with a tapered edge, designed to cover adjoining tile edges that become exposed as the shower floor slopes to accommodate drainage to the Schluter®-KERDI-LINE. The tapered profile features a visible surface of brushed stainless steel and a fleece fabric on the reverse for bonding with the tile adhesive. It is designed to be inserted into the U-shaped groove of the matching hard PVC support profile. The profile can be used for lateral transitions to the wall or the adjoining floor.

Schluter®-KERDI-SHOWER-LS Schluter®-KERDI-SHOWER-L




Schluter®-SHOWERPROFILE-WS Satin anodized aluminum support profile

H = in. Floor & Decor Item No.

Schluter Item No.

L = 39"8 100120435 SPWS19AE/100L = 8' 2-1/2" 8 100120443 SPWS19AE

Schluter®-SHOWERPROFILE-WSC Semi-circular lip

H = in. F & D Item No.

Schluter Item No.

L = 39"8 100120450 SPWSC16GS/100L = 8' 2-1/2" 8 100120492 SPWSC16GS

Schluter®-SHOWERPROFILE-WSL Straight lip


Schluter Item No.

L = 39"8 100120468 SPWSL30T/100L = 8' 2-1/2"8 100120500 SPWSL30T

Schluter®-SHOWERPROFILE-WSK Satin anodized aluminum support profile - retrofit


Schluter Item No.

L = 39"8 100120476 SPWSK52AE/100L = 8' 2-1/2" 8 100119320 SPWSK52AE

Schluter®-SHOWERPROFILE-WSK-EK End cap


Schluter Item No.

8 100120484 EK/SPWSK52AE

3/4"

5/1

6"

3/4"

5/1

6"1-

5/32

"

SHOWERPROFILE-WS + -WSC

SHOWERPROFILE-WS + -WSL

2-1/6"

5/16

"1-15

/32"

2-1/16"

5/16

"

SHOWERPROFILE-WSK + -WSC

SHOWERPROFILE-WSK + -WSL

SHOWERPROFILE-WSK/EK

Schluter®-SHOWERPROFILE-WS/-WSKThe Schluter®-SHOWERPROFILE-WS is a two-part profile that forms a splashguard at the entrance of barrier-free showers. The WS anodized aluminum support profile is set in conjunction with the tile covering and can be combined with either a semi-circular lip or a collapsible upright lip. Both variants allow for wheelchair accessibility. The WSK anodized aluminum support profile is adhered to existing coverings and can be combined with either a semi-circular lip or a collapsible upright lip. Both variants allow for wheelchair accessibility.

ADA-Compliant

Note: SHOWERPROFILE-WS with the WSL straight lip insert is not ADA-compliant.

SHOWERPROFILE-WS SHOWERPROFILE-WSK




Schluter®-KERDI-LINE-FCSchluter®-KERDI-LINE-FC is a stainless steel cover plate for use with the Schluter®-KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end. KERDI-LINE-FC features a brushed finish, and is designed for use with either the solid or perforated grates with brushed stainless steel frame.

Schluter®-KERDI-LINE-FC Cover plate


Schluter Item No.

100029487 V/KLEB35

SHOWERPROFILE-R - Two-part wall transition profile - Brushed stainless steel


Schluter Item No.

L = 39"29/32 - 1-3/8 100126747 SPRA23EB/1001-5/16 - 1-25/32 100126739 SPRA33EB/100L = 55"29/32 - 1-3/8 100126754 SPRA 23 EB/1401-5/16 - 1-25/32 951503072 SPRA 33 EB/140

Schluter®-SHOWERPROFILE-RThe Schluter®-SHOWERPROFILE-R is a two part wall transition profile made of brushed stainless steel for covering the exposed wall area where the floor slopes down to a perimeter linear drain. A fleece fabric is laminated on the reverse of the profile for bonding with the tile adhesive. The two-part design of Schluter-SHOWERPROFILE-R can be seamlessly adjusted to any height between 29/32" and 1-25/32" (available in two versions). The profile is available in lengths of 39" and 55" and can be cut to the desired length.

= H

25/32"

7/8" / 1-1/4"

H = variable

T O O L S

Schluter®-SNIPSSchluter®-SNIPS are specifically designed to cut PVC trim profiles.

Schluter®-SNIPSF & D

Item No.Schluter Item No.

100009414 PSF Replacement blade

100127471 PS90/45EK

Schluter®-DITRA RollerDITRA roller is used to embed DITRA/-DITRA-XL in the bond coat during membrane installation. The lightweight DITRA-ROLLER features a 14-1/2" (37 cm) wide roller and a shelf for placing 50 to 75 lbs of weight (e.g., bag of thin-set mortar or grout, box of tiles, etc.). Between uses, it can be conveniently disassembled for transport and storage.

Schluter®-DITRA RollerF & D

Item No.Schluter Item No.

100115591 DIRO

1-3/8''


Schluter Item No.


Schluter Item No.


Schluter Item No.


A/EBHK2R18 100115393 A125AKB 951501125 A45BH 951500935

A/EHK2R18 951500661 A125AKG 951501570 A45BW 951500940

A/HK/BW 951500522 A125AKGB 951501493 A45G 951500939

A/HK/G 951500509 A125AM 951501068 A45HB 951500937

A/HK/HB 951500523 A125AMB 951501122 A45HG 951500943

A/HKW/BW 100052703 A125AMG 951501474 A45PG 951500938

A/HKW/G 951500508 A125AMGB 951501521 A45SP 951500941

A/HKW/HB 951500506 A125AT 951501276 A45W 951500936

A/HKW/PG 951500524 A125ATB 951501121 A60 951500716

A100 951500729 A125ATG 951501580 A60ABGB 951501492

A100ABGB 951501583 A125ATGB 951501494 A60ACB 951500848

A100ACB 951500993 A125BH 951501299 A60ACG 951500975

A100ACG 951501331 A125BW 951501306 A60ACGB 951501096

A100ACGB 951501353 A125G 951501305 A60AGRB 951501491

A100AGRB 951501582 A125HB 951501303 A60AGSG 951500987

A100AGSG 951501141 A125HG 951501300 A60AK 951501001

A100AK 951501124 A125PG 951501304 A60AKB 951500845

A100AKB 951500992 A125RB 100112192 A60AKG 951501519

A100AKG 951501565 A125SB 951501302 A60AKGB 951501328

A100AKGB 951501374 A125SP 951501307 A60AM 951500828

A100AM 951500974 A125W 951501301 A60AMB 951500847

A100AMB 951500991 A140 951500735 A60AMG 951500972

A100AMG 951501329 A150 951500791 A60AMGB 951501277

A100AMGB 951501473 A160 951500815 A60AT 951501002

A100AT 951501120 A175 951500830 A60ATB 951500846

A100ATB 951500994 A20 951500698 A60ATG 951501520

A100ATG 951501566 A200 951500906 A60ATGB 951501330

A100ATGB 951501375 A210 951500921 A60BH 951500979

A100BH 951501131 A225 951500942 A60BW 951500985

A100BW 951501135 A250 951500977 A60G 951500984

A100G 951501134 A275 951501041 A60HB 951500981

A100HB 951501137 A30 951500709 A60HG 951500980

A100HG 951501132 A300 951501177 A60PG 951500983

A100PG 951501136 A30BH 951500913 A60SP 951500986

A100RB 951501140 A30BW 951500916 A60W 951500988

A100SB 951501139 A30G 951500917 A70 951500719

A100SP 951501133 A30HB 951500914 A80 951500720

A100W 951501138 A30HG 951500920 A80ABGB 951501523

A110 951500730 A30PG 951500918 A80ACB 951500947

A125 951500732 A30G 951500917 A80ACG 951501064

A125ABGB 951501673 A30HB 951500914 A80ACGB 951501172

A125ACB 951501123 A30HG 951500920 A80AGRB 951501522

A125ACG 951501472 A30PG 951500918 A80AGSG 951501003

A125ACGB 951501512 A30SP 951500915 A80AK 951501083

A125AGRB 951501674 A30W 951500919 A80AKB 951500945

A125AGSG 951501298 A45 951500710 A80AKG 951501524

A125AK 951501274 A45AGSG 951500934 A80AKGB 951501355

A P P E N D I X


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


A80AM 951500844 AEBT80 951502924 AHK1S100AT 951200331

A80AMB 951500946 AEBT80 951502924 AHK1S100ATG 951502317

A80AMG 951501065 AERP100B65 951200262 AHK1S100ATGB 951502267

A80AMGB 951501319 AERP125B65 951502190 AHK1S100TSB 951502310

A80AT 951501082 AERP125B90 951502424 AHK1S100TSG 951502309

A80ATB 951500944 AERP150B90 951502432 AHK1S100TSOB 951502308

A80ATG 951501525 AERP200B90 951502447 AHK1S125ACG 951502271

A80ATGB 951501354 AERP60B50 100126762 AHK1S125ACGB 951502229

A80BH 951501011 AERPK125B65 100052695 AHK1S125AE 951501914

A80BW 951501006 AETK100 951501175 AHK1S125AGRB 951502295

A80G 951501005 AETK125 951501596 AHK1S125AK 951501988

A80HB 951501009 AETK60 951500952 AHK1S125AKG 951502333

A80HG 951501010 AETK80 951501043 AHK1S125AKGB 951502297

A80PG 951501007 AEU100 951501089 AHK1S125AM 951501987

A80RB 951501004 AEU125 951501575 AHK1S125AMG 951502307

A80SB 951501013 AEU150 951501908 AHK1S125AMGB 951502263

A80SP 951501008 AEU175 951502003 AHK1S125AT 951501989

A80W 951501012 AEU35 951500817 AHK1S125ATG 951502334

A90 951500725 AEU80 951500976 AHK1S125ATGB 951502296

AE100 951500950 AEVT100B20 951502325 AHK1S125TSB 951502331

AE100D 951501581 AEVT100B30 951502413 AHK1S125TSG 951502332

AE110 951500982 AEVT100B40 951502443 AHK1S125TSOB 951502330

AE125 951501038 AEVT125B20 951502352 AHK1S150AGRB 951502327

AE125D 951501666 AEVT125B30 951502416 AHK1S150AT 951502006

AE140 951501095 AEVT125B40 951502450 AHK1S80ACG 951502232

AE150 951501183 AEVT150B20 951502370 AHK1S80ACGB 951502168

AE160 951501321 AEVT150B30 951502429 AHK1S80AE 951501726

AE175 951501361 AEVT150B40 951502454 AHK1S80AGRB 951502236

AE20 951500737 AEVT175B20 951502397 AHK1S80AK 951501934

AE200 951501527 AEVT175B30 951502433 AHK1S80AKG 951502286

AE210 951501567 AEVT175B40 951502463 AHK1S80AKGB 951502238

AE225 951501589 AEVT200B20 951502434 AHK1S80AM 951501933

AE250 951501672 AEVT200B30 951502451 AHK1S80AMG 951502262

AE275 951501713 AEVT200B40 951502500 AHK1S80AMGB 951502210

AE30 951500812 AEVT80B20 951502298 AHK1S80AT 951501932

AE300 951501815 AEVT80B30 951502396 AHK1S80ATG 951502287

AE45 951500816 AEVT80B40 951502438 AHK1S80ATGB 951502237

AE60 951500829 AHK1S100ACG 951502257 AHK1S80TSB 951502290

AE70 951500903 AHK1S100ACGB 951502191 AHK1S80TSG 951502291

AE80 951500907 AHK1S100AE 951501863 AHK1S80TSOB 951502289

AE80D 951501360 AHK1S100AGRB 951502266 AHKA100ACGB 100106418

AE90 951500933 AHK1S100AK 951501965 AHKA100AE 100048289

AEBT100 951502925 AHK1S100AKG 951502316 AHKA100AT 951200265

AEBT125 951502928 AHK1S100AKGB 951502268 AHKA100ATGB 100007749

AEBT150 951502935 AHK1S100AM 951501963 AHKA125ACGB 100115047

AEBT175 951502938 AHK1S100AMG 951502275 AHKA125AE 100065671

AEBT200 951502944 AHK1S100AMGB 951502233 AHKA125AT 100115062


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


AHKA125ATGB 100115054 AKSN140PG 951502243 AKWS80G 951501911

AHKA150ACGB 100115179 AKSN140SP 951502245 AKWS80GS 951501913

AHKA150AE 100115195 AKSN160G 951502276 AKWS80HB 951501912

AHKA150AT 100115203 AKSN160GS 951502277 AKWS80PG 951501902

AHKA150ATGB 100115187 AKSN160HB 951502285 AKWS80SP 951501909

AHKA80ACGB 100115146 AKSN160PG 951502279 AKWS90G 951501946

AHKA80AE 100084995 AKSN160SP 951502278 AKWS90GS 951501943

AHKA80AT 100115161 AKSN210G 951502373 AKWS90HB 951501944

AHKA80ATGB 100115153 AKSN210GS 951502375 AKWS90PG 951501945

AKSA100G 951502029 AKSN210HB 951502374 AKWS90SP 951501947

AKSA100GS 951502030 AKSN210PG 951502372 AS20BW 951501587

AKSA100HB 951502027 AKSN210SP 951502371 ATK100ABGB 951200282

AKSA100PG 951502028 AKSN80G 951502132 ATK100ACB 951501326

AKSA110G 951502068 AKSN80GS 951502130 ATK100AK 951501599

AKSA110GS 951502069 AKSN80HB 951502134 ATK100AKGB 951501727

AKSA110HB 951502071 AKSN80PG 951502131 ATK100AMB 951501348

AKSA110PG 951502070 AKSN80SP 951502133 ATK100AT 951501598

AKSA125G 951502077 AKWS100G 951501961 ATK100ATGB 951501728

AKSA125GS 951502076 AKWS100GS 951501960 ATK125ABGB 951501977

AKSA125HB 951502075 AKWS100HB 951501957 ATK125ACB 951501695

AKSA125PG 951502078 AKWS100PG 951501958 ATK125AK 951501720

AKSA140G 951502126 AKWS100SP 951501959 ATK125AKGB 951501976

AKSA140GS 951502127 AKWS110G 951501971 ATK125AMB 951501698

AKSA140HB 951502129 AKWS110GS 951501972 ATK125AT 951501719

AKSA140PG 951502128 AKWS110HB 951501973 ATK125ATGB 951501978

AKSA80G 951502019 AKWS110PG 951501974 ATK60ACB 951501091

AKSA80GS 951502022 AKWS110SP 951501975 ATK60AK 951501173

AKSA80HB 951502021 AKWS125G 951501998 ATK60AMB 951501092

AKSA80PG 951502020 AKWS125GS 951502002 ATK60AT 951501174

AKSN100G 951502176 AKWS125HB 951502000 ATK80ABGB 951501689

AKSN100GS 951502179 AKWS125PG 951502001 ATK80ACB 951501176

AKSN100HB 951502180 AKWS125SP 951501999 ATK80AK 951501323

AKSN100PG 951502178 AKWS140G 951502036 ATK80AKGB 951501691

AKSN100SP 951502177 AKWS140GS 951502040 ATK80AMB 951501311

AKSN110G 951502200 AKWS140HB 951502039 ATK80AT 951501327

AKSN110GS 951502204 AKWS140PG 951502037 ATK80ATGB 951501690

AKSN110HB 951502203 AKWS140SP 951502038 AU100ABGB 951501951

AKSN110PG 951502201 AKWS160G 951502118 AU100ACB 951501366

AKSN110SP 951502202 AKWS160GS 951502114 AU100AK 951501180

AKSN125G 951502222 AKWS160HB 951502115 AU100AKGB 951501949

AKSN125GS 951502226 AKWS160PG 951502117 AU100AM 951501179

AKSN125HB 951502225 AKWS160SP 951502116 AU100AMB 951501367

AKSN125PG 951502224 AKWS210G 951502209 AU100AT 951501178

AKSN125SP 951502223 AKWS210GS 951502207 AU100ATGB 951501950

AKSN140G 951502246 AKWS210HB 951502208 AU125ABGB 951502081

AKSN140GS 951502242 AKWS210PG 951502206 AU125ACB 951501716

AKSN140HB 951502244 AKWS210SP 951502205 AU125AK 951501594


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


AU125AKGB 951502082 BWA125BW 951501501 BWB80SP 951501118

AU125AM 951501593 BWA125G 951501499 BWS100BW 951501024

AU125AMB 951501717 BWA125GS 951501495 BWS100G 951501036

AU125AT 951501595 BWA125HB 951501496 BWS100GS 951501020

AU125ATGB 951502080 BWA125PG 951501500 BWS100HB 951501037

AU80ABGB 951501897 BWA125SP 951501498 BWS100PG 951501015

AU80ACB 951501088 BWA45BW 951501093 BWS100SP 951501017

AU80AK 951501062 BWA45G 951501087 BWS110BW 951501029

AU80AKGB 951501899 BWA45GS 951501086 BWS110G 951501030

AU80AM 951501061 BWA45HB 951501085 BWS110GS 951501026

AU80AMB 951501090 BWA45PG 951501094 BWS110HB 951501033

AU80AT 951501063 BWA60BW 951501314 BWS110PG 951501032

AU80ATGB 951501898 BWA60G 951501313 BWS110SP 951501035

AVT100B20AM 951502346 BWA60GS 951501312 BWS125BW 951501034

AVT100B30AM 951502414 BWA60HB 951501309 BWS125G 951501021

AVT100B40AM 951502449 BWA60PG 951501308 BWS125GS 951501027

AVT125B20AM 951502360 BWA60SP 100115344 BWS125HB 951501025

AVT125B30AM 951502428 BWA80BW 951501345 BWS125PG 951501022

AVT125B40AM 951502452 BWA80G 951501343 BWS125SP 951501023

AVT150B20AM 951502391 BWA80GS 951501347 BWS45BW 951500970

AVT150B30AM 951502431 BWA80HB 951501342 BWS45G 951500956

AVT150B40AM 951502464 BWA80PG 951501344 BWS45GS 951500969

AVT175B20AM 951502412 BWA80SP 951501346 BWS45HB 951500971

AVT175B30AM 951502440 BWB100BW 951501297 BWS45PG 951500955

AVT175B40AM 951502466 BWB100G 951501287 BWS45SP 951500954

AVT200B20AM 951502439 BWB100GS 951501286 BWS60BW 951500965

AVT200B30AM 951502455 BWB100HB 951501288 BWS60G 951500966

AVT200B40AM 951502505 BWB100PG 951501283 BWS60GS 951500967

AVT80B20AM 951502324 BWB100SP 951501285 BWS60HB 951500957

AVT80B30AM 951502392 BWB125BW 951501279 BWS60PG 951500962

AVT80B40AM 951502442 BWB125G 951501284 BWS60SP 951500968

BH100 951500563 BWB125GS 951501281 BWS80BW 951500958

BH125 951500568 BWB125HB 951501282 BWS80G 951500960

BH45 951500528 BWB125PG 951501280 BWS80GS 951500959

BH60 951500547 BWB125SP 951501278 BWS80HB 951500961

BH80 951500555 BWB150G 951501516 BWS80PG 951500963

BW100 951500558 BWB200G 951501584 BWS80SP 951500964

BW125 951500566 BWB60BW 951501073 BWS90BW 951501028

BW45 951500530 BWB60G 951501071 BWS90G 951501031

BW60 951500544 BWB60GS 951501074 BWS90GS 951501016

BW80 951500556 BWB60HB 951501070 BWS90HB 951501014

BWA100BW 951501373 BWB60PG 951501072 BWS90PG 951501018

BWA100G 951501365 BWB80BW 951501115 BWS90SP 951501019

BWA100GS 951501362 BWB80G 951501117 CG10B 951502513

BWA100HB 951501372 BWB80GS 951501113 CG10B/150 951502213

BWA100PG 951501364 BWB80HB 951501119 CG10S 951502280

BWA100SP 951501363 BWB80PG 951501116 CG10S/150 951501906


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


CG10SE 951502493 DHEHK240103 100131572 E/AHK1S/AK 951500831

CG10SE/150 951502170 DHEHK24011 100131564 E/AHK1S/AKG 951501100

CG12B 951502534 DHEHK240129 100061811 E/AHK1S/AKGB 951501103

CG12B/150 951502256 DHEHK240145 100131580 E/AHK1S/AM 951500834

CG12S 951502351 DHEHK24016 100131598 E/AHK1S/AMG 951501101

CG12S/150 951501929 DHEHK240167 100078773 E/AHK1S/AMGB 951501104

CG12SE 951502518 DHEHK240183 100131606 E/AHK1S/AT 951200328

CG12SE/150 951502197 DHEHK240204 100067677 E/AHK1S/ATG 951501098

CG15B 951502565 DHEHK24021 100078765 E/AHK1S/ATGB 951501102

CG15B/150 951502311 DHEHK240225 100131614 E/AHK1S/TSB 951501316

CG25B 951502578 DHEHK240269 100078716 E/AHK1S/TSG 951501317

CG25B/150 951502340 DHEHK24027 100131622 E/AHK1S/TSOB 951501315

CG8B 951502483 DHEHK24032 100078757 E/FLEB 951500501

CG8B/150 951502152 DHEHK24038 100131630 E/GBEB 951500435

CG8S 951502251 DHEHK24043 100131648 E/GSEB 951500434

CG8S/150 951501866 DHEHK24053 100078740 E/HKUR36E 100115443

CG8SE 951502475 DHEHK24064 100131655 E/HKW/G 951503048

CG8SE/150 951502136 DHEHK24075 100071299 E/KHK15E 100115831

DB14AE 951501822 DHEHK24085 100131663 E/KHK15EB 100115823

DB14AK 951501910 DHEK12040 100078351 E/PHK1S/BH 951500422

DB14AM 951501821 DHEK12056 100078344 E/PHK1S/BW 951500400

DE100EBS 100114842 DHERS/BW 100078336 E/PHK1S/G 951500402

DE100ES 100114859 DHERSD/BW 100056506 E/PHK1S/HB 951500404

DE110EBS 100114883 DIRO 100115591 E/PHK1S/PG 951500421

DE110ES 100114891 DITRA150 951502992 E/PHK1S/SP 951500403

DE125EBS 100114826 DITRA30M 951503017 E/PHK1S/W 951500406

DE125ES 100114834 DITRA5M 951502734 E/PRO100BH 951500345

DE80EBS 100114867 DITRA-XL/175 951502999 E/PRO100BW 951500354

DE80ES 100114875 DL625ACG 951501956 E/PRO100G 951500377

DH512M 100067669 DL625ACGB 951502026 E/PRO100GS 951500392

DH5MA 100056498 DL625AE 951501600 E/PRO100HB 951500365

DHEHK120102 100078724 DL625AK 951501682 E/PRO100HG 951500368

DHEHK12011 100131507 DL625AKG 951501982 E/PRO100PG 951500357

DHEHK120113 100131515 DL625AKGB 951502055 E/PRO100SP 951500360

DHEHK120134 100131523 DL625AM 951501597 E/PRO100W 951500348

DHEHK12016 100076538 DL625AMG 951501962 E/PRO60BH 951500346

DHEHK12021 100131531 DL625AMGB 951502025 E/PRO60BW 951500355

DHEHK12027 100078674 DL625AT 951501681 E/PRO60G 951500378

DHEHK12032 100078690 DL625ATG 951501983 E/PRO60GS 951500362

DHEHK12038 100078682 DL625ATGB 951502057 E/PRO60HB 951500366

DHEHK12043 100078708 DL625E 951502401 E/PRO60HG 951500369

DHEHK12051 100131549 DL625EB 951502577 E/PRO60PG 951500358

DHEHK12064 100056514 DL625MC 951502632 E/PRO60SP 951500361

DHEHK12073 100131556 E/AHK1S/ACG 951501099 E/PRO60W 951500349

DHEHK12083 100065689 E/AHK1S/ACGB 951501097 E/PRO80BH 951500341

DHEHK12092 100078732 E/AHK1S/AE 951500832 E/PRO80BW 951500350

DHEHK204167 100067685 E/AHK1S/AGRB 951501105 E/PRO80G 951500363


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


E/PRO80GS 951500353 E135/SS110EB39 100121185 E135RS100AMGB39 951501445

E/PRO80HB 951500393 E135/SS125EB39 100121151 E135RS100AMGB57 951501444

E/PRO80HG 951500344 E135/SS60EB39 100121169 E135RS100AT39 951501263

E/PRO80PG 951500351 E135/SS90EB39 100121177 E135RS100AT57 951501254

E/PRO80SP 951500352 E135RC100ACGB39 951501810 E135RS100ATGB39 951501380

E/PRO80W 951500343 E135RC100AE39 951501646 E135RS125ABGB39 951501433

E/TE 951500339 E135RC100AK39 951501653 E135RS125ACGB39 951501435

E100 951502007 E135RC100AKGB39 951501812 E135RS125ACGB57 951501397

E100D 951502103 E135RC100AM39 951501648 E135RS125AE39 951501215

E100EB 951502175 E135RC100AMGB39 951501743 E135RS125AE57 951501196

E110 951502011 E135RC100AT39 951501650 E135RS125AK39 951501217

E110D 951502121 E135RC100ATGB39 951501814 E135RS125AK57 951501198

E110EB 100127109 E135RC100TSB39 951501854 E135RS125AKGB39 951501436

E125 951502023 E135RC100TSG39 951501845 E135RS125AKGB57 951501398

E125D 951502149 E135RC100TSOB39 951501857 E135RS125AM57 951501203

E125EB 951502216 E135RC125ACGB39 951501744 E135RS125AMGB39 951501434

E135/AHK1S/ACG 951501790 E135RC125AE39 951501645 E135RS125AMGB57 951501396

E135/AHK1S/ACGB 951501734 E135RC125AK39 951501654 E135RS125AT39 951501233

E135/AHK1S/AE 951501660 E135RC125AKGB39 951501811 E135RS125AT57 951501200

E135/AHK1S/AGRB 951501735 E135RC125AM39 951501647 E135RS125ATGB39 951501437

E135/AHK1S/AK 951501665 E135RC125AMGB39 951501742 E135RS80ABGB39 951501451

E135/AHK1S/AKG 951501793 E135RC125AT39 951501649 E135RS80ACGB39 951501457

E135/AHK1S/AKGB 951501732 E135RC125ATGB39 951501813 E135RS80ACGB57 951501426

E135/AHK1S/AM 951501661 E135RC125TSB39 951501853 E135RS80AE39 951501244

E135/AHK1S/AMG 951501792 E135RC125TSG39 951501844 E135RS80AE57 951501229

E135/AHK1S/AMGB 951501794 E135RC125TSOB39 951501824 E135RS80AK39 951501260

E135/AHK1S/AT 951501662 E135RC80ACGB39 951501807 E135RS80AK57 951501230

E135/AHK1S/ATG 951501791 E135RC80AE39 951501644 E135RS80AKGB39 951501460

E135/AHK1S/ATGB 951501795 E135RC80AK39 951501658 E135RS80AKGB57 951501427

E135/AHK1S/TSB 951501880 E135RC80AKGB39 951501808 E135RS80AM57 951501227

E135/AHK1S/TSG 951501883 E135RC80AM39 951501651 E135RS80AMGB39 951501454

E135/AHK1S/TSOB 951501872 E135RC80AMGB39 951501806 E135RS80AMGB57 951501425

E135/AHKA/ACGB 100115104 E135RC80AT39 951501652 E135RS80AT39 951501259

E135/AHKA/AE 100115120 E135RC80ATGB39 951501809 E135RS80AT57 951501231

E135/AHKA/AT 100115138 E135RC80TSB39 951501823 E135RS80ATGB39 951501463

E135/AHKA/ATGB 100115112 E135RC80TSG39 951501825 E140 951502054

E135/EBHK2R18 100115377 E135RC80TSOB39 951501855 E140D 951502166

E135/EHK2R18 100115385 E135RS100ABGB39 951501442 E150 951502183

E135/HKUR10E 100115526 E135RS100ACGB39 951501447 E160 951502199

E135/HKUR10EB 100115575 E135RS100ACGB57 951501446 E160D 951502192

E135/PHK1S/BH 951500426 E135RS100AE39 951501247 E175 951502217

E135/PHK1S/BW 951500427 E135RS100AE57 951501246 E185D 951502230

E135/PHK1S/G 951500412 E135RS100AK39 951501251 E20 951501670

E135/PHK1S/HB 951500425 E135RS100AK57 951501250 E200 951502258

E135/PHK1S/PG 951500395 E135RS100AKGB39 951501467 E210D 951502260

E135/PHK1S/SP 951500424 E135RS100AKGB57 951501381 E225 951502294

E135/PHK1S/W 951500417 E135RS100AM57 951501264 E250 951502341


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


E250D 951502319 E2L/RO80AKGB 951501155 E90/AHK1S/ACG 951501770

E26/CG 951500318 E2L/RO80AM 951500874 E90/AHK1S/ACGB 951501747

E26/G 951500319 E2L/RO80AMG 951500887 E90/AHK1S/AE 951501617

E26/GS 951500322 E2L/RO80AMGB 951501154 E90/AHK1S/AGRB 951501745

E26/HB 951500324 E2L/RO80AT 951500875 E90/AHK1S/AK 951501631

E26/NB 951500314 E2L/RO80ATG 951500886 E90/AHK1S/AKG 951501772

E2L/RO100ABGB 100040237 E2L/RO80ATGB 951501153 E90/AHK1S/AKGB 951501748

E2L/RO100ACG 951500822 E30 951501724 E90/AHK1S/AM 951501619

E2L/RO100ACGB 951501058 E300 951502390 E90/AHK1S/AMG 951501773

E2L/RO100AE 951500890 E300D 951502359 E90/AHK1S/AMGB 951501746

E2L/RO100AGR 951500882 E37E110S 100115658 E90/AHK1S/AT 951501618

E2L/RO100AGSB 951501145 E37E60S 100115617 E90/AHK1S/ATG 951501771

E2L/RO100AGSG 951500888 E37E80S 100115633 E90/AHK1S/ATGB 951501749

E2L/RO100AK 951500895 E37EB110S 100115641 E90/AHK1S/TSB 951501875

E2L/RO100AKG 951500893 E37EB60S 100115609 E90/AHK1S/TSG 951501876

E2L/RO100AKGB 951501144 E37EB80S 100115625 E90/AHK1S/TSOB 951501877

E2L/RO100AM 951500862 E37V2A110/150 951502430 E90/AHKA/ACGB 100115252

E2L/RO100AMG 951500879 E37V2A110/200 951502531 E90/AHKA/AE 100115260

E2L/RO100AMGB 951501143 E37V2A110/250 951502649 E90/AHKA/AT 100115278

E2L/RO100AT 951500885 E37V2A60/150 951502382 E90/AHKA/ATGB 100115245

E2L/RO100ATG 951500877 E37V2A60/200 951502491 E90/PHK1S/BH 951500416

E2L/RO100ATGB 951501147 E37V2A60/250 951502600 E90/PHK1S/BW 951500423

E2L/RO125ABGB 951501151 E37V2A80/150 951502411 E90/PHK1S/G 951500409

E2L/RO125ACG 951500820 E37V2A80/200 951502511 E90/PHK1S/HB 951500414

E2L/RO125ACGB 951501057 E37V2A80/250 951502631 E90/PHK1S/PG 951500396

E2L/RO125AE 951500889 E37V2AEB110/150 951502537 E90/PHK1S/SP 951500411

E2L/RO125AGR 951500881 E37V2AEB110/200 951502667 E90/PHK1S/W 951500397

E2L/RO125AGSB 951501150 E37V2AEB110/250 951502773 E90/SS110EB30 100121037

E2L/RO125AGSG 951500871 E37V2AEB60/150 951502499 E90/SS110EB39 100121227

E2L/RO125AK 951500894 E37V2AEB60/200 951502642 E90/SS125EB30 100121011

E2L/RO125AKG 951500892 E37V2AEB60/250 951502746 E90/SS125EB39 100121201

E2L/RO125AKGB 951501149 E37V2AEB80/150 951502522 E90/SS60EB39 100121193

E2L/RO125AM 951500883 E37V2AEB80/200 951502656 E90/SS90EB30 100121029

E2L/RO125AMG 951500878 E37V2AEB80/250 951502763 E90/SS90EB39 100121219

E2L/RO125AMGB 951501148 E45 951501938 E90D 951502090

E2L/RO125AT 951500884 E52/CG 951500331 E90Q/AHK1S/ACG 100114982

E2L/RO125ATG 951500876 E52/G 951500334 E90Q/AHK1S/AE 100114990

E2L/RO125ATGB 951501152 E52/GS 951500335 E90Q/AHK1S/AT 100115005

E2L/RO80ABGB 951501157 E52/HB 951500333 E90Q/AHK1S/TSB 100115013

E2L/RO80ACG 951500821 E52/NB 951500330 E90Q/AHK1S/TSG 100115039

E2L/RO80ACGB 951501055 E60 951501952 E90Q/AHK1S/TSOB 100115021

E2L/RO80AE 951500891 E60EB 951502079 E90RC100ACGB39 951501753

E2L/RO80AGR 951500873 E70 951501970 E90RC100AE39 951501621

E2L/RO80AGSB 951501156 E80 951501981 E90RC100AK39 951501602

E2L/RO80AGSG 951500896 E80D 951502073 E90RC100AKGB39 951501755

E2L/RO80AK 951500880 E80EB 951502120 E90RC100AM39 951501623

E2L/RO80AKG 951500872 E90 951501993 E90RC100AMGB39 951501751


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


E90RC100AT39 951501625 E90RS125AK39 951501207 ED/RO100BH 951500485

E90RC100ATGB39 951501757 E90RS125AK57 951501188 ED/RO100BW 951500455

E90RC100TSB39 951501842 E90RS125AKGB39 951501391 ED/RO100E 951500594

E90RC100TSG39 951501832 E90RS125AKGB57 951501384 ED/RO100G 951500454

E90RC100TSOB39 951501851 E90RS125AM57 951501186 ED/RO100HB 951500458

E90RC125ACGB39 951501767 E90RS125AMGB39 951501389 ED/RO100HG 951500459

E90RC125AE39 951501612 E90RS125AMGB57 951501382 ED/RO100PG 951500456

E90RC125AK39 951501616 E90RS125AT39 951501201 ED/RO100SP 951500457

E90RC125AKGB39 951501768 E90RS125AT57 951501187 ED/RO100W 951500460

E90RC125AM39 951501613 E90RS125ATGB39 951501392 ED/RO125BH 951500453

E90RC125AMGB39 951501766 E90RS80ABGB39 951501443 ED/RO125BW 951500446

E90RC125AT39 951501614 E90RS80ACGB39 951501378 ED/RO125E 951500614

E90RC125ATGB39 951501769 E90RS80ACGB57 951501400 ED/RO125G 951500442

E90RC125TSB39 951501841 E90RS80AE39 951501249 ED/RO125HB 951500449

E90RC125TSG39 951501831 E90RS80AE57 951501197 ED/RO125HG 951500450

E90RC125TSOB39 951501850 E90RS80AK39 951501253 ED/RO125PG 951500447

E90RC80ACGB39 951501775 E90RS80AK57 951501199 ED/RO125SP 951500448

E90RC80AE39 951501626 E90RS80AKGB39 951501377 ED/RO125W 951500451

E90RC80AK39 951501629 E90RS80AKGB57 951501401 ED/RO60BH 951500497

E90RC80AKGB39 951501776 E90RS80AM57 951501204 ED/RO60BW 951500478

E90RC80AM39 951501627 E90RS80AMGB39 951501379 ED/RO60E 951500637

E90RC80AMGB39 951501774 E90RS80AMGB57 951501399 ED/RO60G 951500470

E90RC80AT39 951501628 E90RS80AT39 951501262 ED/RO60HB 951500494

E90RC80ATGB39 951501777 E90RS80AT57 951501205 ED/RO60HG 951500484

E90RC80TSB39 951501826 E90RS80ATGB39 951501376 ED/RO60PG 951500480

E90RC80TSG39 951501846 EBHKU11/O11 951502681 ED/RO60SP 951500482

E90RC80TSOB39 951501858 EBHKU7/O7 951502651 ED/RO60W 951500487

E90RS100ABGB39 951501411 EBHKU9/O9 951502660 ED/RO80BH 951500492

E90RS100ACGB39 951501405 EBTK100 951502461 ED/RO80BW 951500488

E90RS100ACGB57 951501385 EBTK110 100126770 ED/RO80E 951500626

E90RS100AE39 951501210 EBTK125 951502492 ED/RO80G 951500483

E90RS100AE57 951501189 EBTK80 951502435 ED/RO80HB 951500436

E90RS100AK39 951501239 EBU100 951502538 ED/RO80HG 951500491

E90RS100AK57 951501192 EBU110 100127026 ED/RO80PG 951500489

E90RS100AKGB39 951501408 EBU125 951502587 ED/RO80SP 951500490

E90RS100AKGB57 951501387 EBU150 951502628 ED/RO80W 951500496

E90RS100AM57 951501190 EBU175 951502650 EDP100 951502661

E90RS100AMGB39 951501402 EBU200 951502682 EDP110 951502668

E90RS100AMGB57 951501386 EBU80 951502506 EDP125 951502683

E90RS100AT39 951501222 ED/IN100ACG 100112051 EDP140 951502702

E90RS100AT57 951501191 ED/IN100AE 100112069 EDP160 951502712

E90RS100ATGB39 951501409 ED/IN110ACG 100112093 EDP185 951502723

E90RS125ABGB39 951501388 ED/IN110AE 100112101 EDP210 951502735

E90RS125ACGB39 951501390 ED/IN125ACG 100112036 EDP250 951502754

E90RS125ACGB57 951501383 ED/IN125AE 100112044 EDP300 951502770

E90RS125AE39 951501193 ED/IN80ACG 100112077 EDP80 951502657

E90RS125AE57 951501185 ED/IN80AE 100112085 EDP90 951502659


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


EHKU11/O11 951502539 EKSA100GS 951502594 EKSB60G 951502611

EHKU11/O11/V4A 951502598 EKSA100HB 951502592 EKSB60GS 951502613

EHKU16/O16/V4A 951502619 EKSA100PG 951502593 EKSB60HB 951502610

EHKU7/O7 951502507 EKSA110G 951502601 EKSB60PG 951502612

EHKU7/O7/V4A 951502563 EKSA110GS 951502604 EKSN100G 951502713

EHKU9/O9 951502527 EKSA110HB 951502603 EKSN100GS 951502714

EHKU9/O9/V4A 951502575 EKSA110PG 951502602 EKSN100HB 951502716

EK/HKUR10EB 100115492 EKSA125G 951502617 EKSN100PG 951502717

EK/HKUR36E 100115419 EKSA125GS 951502616 EKSN100SP 951502715

EK/RO100EB 100127059 EKSA125HB 951502614 EKSN110G 951502727

EK/RO125EB 100127042 EKSA125PG 951502615 EKSN110GS 951502728

EK/RO80EB 100127067 EKSA140G 951502624 EKSN110HB 951502724

EK/SPWSK52AE 100120484 EKSA140GS 951502626 EKSN110PG 951502726

EKEU11/O10BW 951501078 EKSA140HB 951502627 EKSN110SP 951502725

EKEU11/O10G 951501076 EKSA140PG 951502625 EKSN125G 951502729

EKEU11/O10GS 951501077 EKSA160G 951502637 EKSN125GS 951502733

EKEU11/O10HB 951501069 EKSA160GS 951502638 EKSN125HB 951502730

EKEU11/O10PG 951501075 EKSA160HB 951502635 EKSN125PG 951502731

EKEU11/O10SP 951501079 EKSA160PG 951502636 EKSN125SP 951502732

EKEU13/O12BW 951501107 EKSA185G 951502645 EKSN140G 951502739

EKEU13/O12G 951501111 EKSA185GS 951502648 EKSN140GS 951502736

EKEU13/O12GS 951501106 EKSA185HB 951502646 EKSN140HB 951502745

EKEU13/O12HB 951501110 EKSA185PG 951502647 EKSN140PG 951502738

EKEU13/O12PG 951501108 EKSA210G 951502652 EKSN140SP 951502737

EKEU13/O12SP 951501109 EKSA210GS 951502653 EKSN160G 951502748

EKEU15/O14BW 951501271 EKSA210HB 951502654 EKSN160GS 951502751

EKEU15/O14G 951501269 EKSA210PG 951502655 EKSN160HB 951502749

EKEU15/O14GS 951501272 EKSA250G 951502672 EKSN160PG 951502750

EKEU15/O14HB 951501268 EKSA250GS 951502670 EKSN160SP 951502752

EKEU15/O14PG 951501270 EKSA250HB 951502669 EKSN185G 951502761

EKEU15/O14SP 951501273 EKSA250PG 951502671 EKSN185GS 951502758

EKEU8/O7BW 951500998 EKSA300G 951502706 EKSN185HB 951502759

EKEU8/O7G 951500995 EKSA300GS 951502707 EKSN185PG 951502762

EKEU8/O7GS 951500997 EKSA300HB 951502704 EKSN185SP 951502760

EKEU8/O7HB 951501000 EKSA300PG 951502705 EKSN210G 951502769

EKEU8/O7PG 951500999 EKSA80G 951502478 EKSN210GS 951502767

EKEU8/O7SP 951500996 EKSA80GS 951502479 EKSN210HB 951502765

EKEU9/O8BW 951501050 EKSA80HB 951502481 EKSN210PG 951502768

EKEU9/O8G 951501051 EKSA80PG 951502480 EKSN210SP 951502766

EKEU9/O8GS 951501048 EKSB25G 951502552 EKSN250G 951502786

EKEU9/O8HB 951501049 EKSB25GS 951502549 EKSN250GS 951502784

EKEU9/O8PG 951501052 EKSB25HB 951502551 EKSN250HB 951502783

EKEU9/O8SP 951501053 EKSB25PG 951502550 EKSN250PG 951502785

EKI/AS20BW 951500430 EKSB45G 951502586 EKSN250SP 951502787

EKL/AS20BW 100114594 EKSB45GS 951502583 EKSN300G 951502828

EKR/AS20BW 100114750 EKSB45HB 951502585 EKSN300GS 951502832

EKSA100G 951502595 EKSB45PG 951502584 EKSN300HB 951502830


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


EKSN300PG 951502831 EV/Q125EB 951502288 EV/RO100AMGB 951500767

EKSN300SP 951502829 EV/Q125TSB 951500839 EV/RO100AT 951500639

EKSN80G 951502608 EV/Q125TSG 951500838 EV/RO100ATG 951500692

EKSN80GS 951502607 EV/Q125TSOB 951500837 EV/RO100ATGB 951500742

EKSN80HB 951502605 EV/Q140E 951502148 EV/RO100E 951501985

EKSN80PG 951502609 EV/Q140EB 951502300 EV/RO100EB 951502162

EKSN80SP 951502606 EV/Q150AE 951500707 EV/RO100TSB 951500811

EL/AHKA/ACGB 100115286 EV/Q150E 951502219 EV/RO100TSG 951500799

EL/AHKA/AE 100048305 EV/Q150EB 951502335 EV/RO100TSOB 951500795

EL/AHKA/AT 951200263 EV/Q200AE 951500708 EV/RO110E 951501997

EL/AHKA/ATGB 100115294 EV/Q45ACG 951500711 EV/RO110EB 951502163

EL/HK/G 951500502 EV/Q45AE 951500658 EV/RO125ABGB 951500783

EQ/HKUR10E 100115542 EV/Q45AT 951500659 EV/RO125ACG 951500685

EQ/HKUR10EB 100115534 EV/Q45E 100126663 EV/RO125ACGB 951500784

ER/AHKA/ACGB 100115310 EV/Q60ABGB 951500827 EV/RO125AE 951500598

ER/AHKA/AE 100048313 EV/Q60ACG 951500714 EV/RO125AGR 951500600

ER/AHKA/AT 100115328 EV/Q60AE 951500657 EV/RO125AGSB 951500765

ER/AHKA/ATGB 100115302 EV/Q60AT 951500650 EV/RO125AGSG 951500701

ER/HK/G 951500510 EV/Q60E 951501996 EV/RO125AK 951500612

ETK100 951502321 EV/Q60EB 951502167 EV/RO125AKG 951500686

ETK110 100126788 EV/Q80ABGB 951500824 EV/RO125AKGB 951500782

ETK125 951502407 EV/Q80ACG 951500712 EV/RO125AM 951500599

ETK80 951502228 EV/Q80AE 951500655 EV/RO125AMG 951500687

EU100 951502328 EV/Q80AT 951500654 EV/RO125AMGB 951500781

EU110 100127034 EV/Q80E 951502010 EV/RO125AT 951500615

EU125 951502415 EV/Q80EB 951502184 EV/RO125ATG 951500688

EU150 951502441 EV/Q80TSB 951500843 EV/RO125ATGB 951500780

EU175 951502468 EV/Q80TSG 951500842 EV/RO125E 951502004

EU200 951502528 EV/Q80TSOB 951500835 EV/RO125EB 951502164

EU80 951502234 EV/Q90E 951502024 EV/RO125TSB 951500803

EV/DB14AE 951500792 EV/Q90EB 951502227 EV/RO125TSG 951500801

EV/Q100ABGB 951500825 EV/QF8/50ABGB 951501893 EV/RO125TSOB 951500804

EV/Q100ACG 951500715 EV/QF8/50ACG 100126697 EV/RO150E 951502009

EV/Q100AE 951500651 EV/QF8/50AE 951501563 EV/RO150EB 951502220

EV/Q100AT 951500656 EV/QF8/50AT 951501562 EV/RO45E 951501894

EV/Q100E 951502072 EV/RO100ABGB 951500748 EV/RO60ABGB 951500749

EV/Q100EB 951502265 EV/RO100ACG 951500679 EV/RO60ACG 951500680

EV/Q100TSB 951500836 EV/RO100ACGB 951500745 EV/RO60ACGB 951500746

EV/Q100TSG 951500840 EV/RO100AE 951500622 EV/RO60AE 951500623

EV/Q100TSOB 951500841 EV/RO100AGR 951500607 EV/RO60AGR 951500608

EV/Q110E 951502089 EV/RO100AGSB 951500739 EV/RO60AGSB 951500755

EV/Q110EB 951502274 EV/RO100AGSG 951500704 EV/RO60AGSG 951500706

EV/Q125ABGB 951500826 EV/RO100AK 951500629 EV/RO60AK 951500630

EV/Q125ACG 951500713 EV/RO100AKG 951500682 EV/RO60AKG 951500683

EV/Q125AE 951500652 EV/RO100AKGB 951500770 EV/RO60AKGB 951500771

EV/Q125AT 951500653 EV/RO100AM 951500603 EV/RO60AM 951500604

EV/Q125E 951502099 EV/RO100AMG 951500665 EV/RO60AMG 951500689


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


EV/RO60AMGB 951500768 FLEX125/30 951502983 GBEB150CG 951502954

EV/RO60AT 951500593 FLEX125/5M 951502141 GBEB150CG/150 951502700

EV/RO60ATG 951500691 FLEX250/30 951502997 GBEB150GS 951502955

EV/RO60ATGB 951500743 FLEX250/5M 951502489 GBEB150GS/150 951502701

EV/RO60E 951501896 G100 951500562 GBEB150NB 951502956

EV/RO60EB 951502014 G10B 951502512 GBEB150NB/150 951502699

EV/RO70E 951501925 G10B/150 951502212 GBEB150T 951502953

EV/RO70EB 951502013 G10S 951502281 GBEB150T/150 951502698

EV/RO80ABGB 951500753 G10S/150 951501907 GBEB90CG 951502942

EV/RO80ACG 951500694 G10SE 951502495 GBEB90CG/150 951502675

EV/RO80ACGB 951500752 G10SE/150 951502173 GBEB90GS 951502941

EV/RO80AE 951500605 G125 951500574 GBEB90GS/150 951502674

EV/RO80AGR 951500634 G12B 951502533 GBEB90NB 951502943

EV/RO80AGSB 951500773 G12B/150 951502254 GBEB90NB/150 951502676

EV/RO80AGSG 951500699 G12S 951502349 GBEB90T 951502940

EV/RO80AK 951500638 G12S/150 951501930 GBEB90T/150 951502673

EV/RO80AKG 951500690 G12SE 951502520 GBEBKCG 951502910

EV/RO80AKGB 951500751 G12SE/150 951502194 GBEBKCG/150 951502621

EV/RO80AM 951500609 G15B 951502567 GBEBKGS 951502909

EV/RO80AMG 951500695 G15B/150 951502313 GBEBKGS/150 951502623

EV/RO80AMGB 951500750 G25B 951502579 GBEBKNB 951502911

EV/RO80AT 951500620 G25B/150 951502336 GBEBKNB/150 951502620

EV/RO80ATG 951500664 G45 951500535 GBEBKT 951502908

EV/RO80ATGB 951500754 G60 951500543 GBEBKT/150 951502622

EV/RO80E 951501931 G80 951500553 GBKB183CG 951502989

EV/RO80EB 951502016 G8B 951502486 GBKB183GS 951502988

EV/RO80TSB 951500797 G8B/150 951502154 GBKB183NB 951502991

EV/RO80TSG 951500798 G8S 951502247 GBKB183T 951502990

EV/RO80TSOB 951500794 G8S/150 951501870 GS100 951500565

EV/RO90E 951501984 G8SE 951502473 GS10B 951502516

EV/RO90EB 951502015 G8SE/150 951502138 GS10B/150 951502215

EZC/CG6 951500904 GBEB110CG 951502946 GS10S 951502282

EZC/CG9 951501080 GBEB110CG/150 951502679 GS10S/150 951501903

EZM/G6 951500905 GBEB110GS 951502947 GS10SE 951502496

EZM/G9 951501081 GBEB110GS/150 951502678 GS10SE/150 951502169

FL110E 100056001 GBEB110NB 951502948 GS125 951500572

FL110E/150 100056068 GBEB110NB/150 951502680 GS12B 951502532

FL110EB 951502530 GBEB110T 951502945 GS12B/150 951502255

FL110EB/150 100056035 GBEB110T/150 951502677 GS12S 951502347

FL125E 100056019 GBEB130CG 951502952 GS12S/150 951501926

FL125E/150 100056076 GBEB130CG/150 951502686 GS12SE 951502517

FL125EB 100055987 GBEB130GS 951502951 GS12SE/150 951502193

FL125EB/150 100056043 GBEB130GS/150 951502685 GS15B 951502564

FL90E 100055995 GBEB130NB 951502949 GS15B/150 951502312

FL90E/150 100056050 GBEB130NB/150 951502684 GS25B 951502581

FL90EB 100055961 GBEB130T 951502950 GS25B/150 951502337

FL90EB/150 100056027 GBEB130T/150 951502687 GS45 951500527


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


GS60 951500545 GSEBKT/150 951502458 HKWU11/O11PG 951501553

GS80 951500548 GSKB183CG 951502894 HKWU7/O7BW 951501559

GS8B 951502484 GSKB183GS 951502892 HKWU7/O7G 951501561

GS8B/150 951502150 GSKB183NB 951502893 HKWU7/O7HB 951501560

GS8S 951502248 GSKB183T 951502895 HKWU7/O7PG 951501550

GS8S/150 951501869 HB100 951500559 HKWU9/O9BW 951501556

GS8SE 951502472 HB10B 951502514 HKWU9/O9G 951501551

GS8SE/150 951502135 HB10B/150 951502211 HKWU9/O9HB 951501555

GSEB110CG 951502791 HB10S 951502284 HKWU9/O9PG 951501552

GSEB110CG/150 951502554 HB10S/150 951501904 I/2KHK15E 100115799

GSEB110GS 951502790 HB10SE 951502497 I/2KHK15EB 100115781

GSEB110GS/150 951502555 HB10SE/150 951502172 I/3KHK15E 100115815

GSEB110NB 951502789 HB125 951500567 I/3KHK15EB 100115807

GSEB110NB/150 951502556 HB12B 951502536 I/AS20BW 100115336

GSEB110T 951502788 HB12B/150 951502252 I/EBHK2R18 951500721

GSEB110T/150 951502553 HB12S 951502350 I/EBHK3R18 951500723

GSEB130CG 951502796 HB12S/150 951501928 I/EHK2R18 951500660

GSEB130CG/150 951502562 HB12SE 951502521 I/EHK3R18 951500663

GSEB130GS 951502795 HB12SE/150 951502196 I/HK2R18/BW 951500504

GSEB130GS/150 951502560 HB15B 951502566 I/HK2R18/G 951500525

GSEB130NB 951502793 HB15B/150 951502314 I/HK2R18/HB 951500526

GSEB130NB/150 951502559 HB25B 951502582 I/HK3R18/BW 951500512

GSEB130T 951502794 HB25B/150 951502338 I/HK3R18/G 951500511

GSEB130T/150 951502561 HB45 951500529 I/HK3R18/HB 951500515

GSEB150CG 951502813 HB60 951500541 I/HKU3R10E 100115518

GSEB150CG/150 951502571 HB80 951500549 I/HKU3R10EB 100115450

GSEB150GS 951502812 HB8B 951502487 I/HKU3R3610E 100115435

GSEB150GS/150 951502572 HB8B/150 951502153 I/HKW2R18/BW 951500517

GSEB150NB 951502811 HB8S 951502249 I/HKW2R18/G 951500514

GSEB150NB/150 951502573 HB8S/150 951501868 I/HKW2R18/HB 951500521

GSEB150T 951502810 HB8SE 951502474 I/HKW2R18/PG 951500519

GSEB150T/150 951502570 HB8SE/150 951502137 I/HKW3R18/BW 951500516

GSEB90CG 951502782 HG100 951500561 I/HKW3R18/G 951500513

GSEB90CG/150 951502544 HG125 951500570 I/HKW3R18/HB 951500520

GSEB90GS 951502781 HG45 951500533 I/HKW3R18/PG 951500518

GSEB90GS/150 951502545 HG60 951500546 I/PRO100BH 951500342

GSEB90NB 951502780 HG80 951500554 I/PRO100BW 951500382

GSEB90NB/150 951502546 HKU12/O9BW 951501955 I/PRO100G 951500380

GSEB90T 951502779 HKU12/O9G 951501954 I/PRO100GS 951500374

GSEB90T/150 951502543 HKU12/O9HB 951501953 I/PRO100HB 951500379

GSEBKCG 951502710 HKUR10E 100115559 I/PRO100HG 951500386

GSEBKCG/150 951502460 HKUR10E/V4A 100115583 I/PRO100PG 951500384

GSEBKGS 951502711 HKUR10EB 100115468 I/PRO100SP 951500372

GSEBKGS/150 951502459 HKUR36E 100115427 I/PRO100W 951500388

GSEBKNB 951502709 HKWU11/O11BW 951501557 I/PRO60BH 951500340

GSEBKNB/150 951502457 HKWU11/O11G 951501554 I/PRO60BW 951500383

GSEBKT 951502708 HKWU11/O11HB 951501558 I/PRO60G 951500381


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


I/PRO60GS 951500375 I135/SS125EB39 100121052 I135RS100AMGB57 951501412

I/PRO60HB 951500385 I135/SS60EB39 100121060 I135RS100AT39 951501256

I/PRO60HG 951500387 I135/SS90EB39 100121094 I135RS100AT57 951501224

I/PRO60PG 951500371 I135RC100ACGB39 951501800 I135RS100ATGB39 951501461

I/PRO60SP 951500373 I135RC100AE39 951501638 I135RS125ABGB39 951501448

I/PRO60W 951500389 I135RC100AK39 951501655 I135RS125ACGB39 951501429

I/PRO80BH 951500370 I135RC100AKGB39 951501801 I135RS125ACGB57 951501423

I/PRO80BW 951500390 I135RC100AM39 951501640 I135RS125AE39 951501241

I/PRO80G 951500376 I135RC100AMGB39 951501798 I135RS125AE57 951501208

I/PRO80GS 951500391 I135RC100AT39 951501642 I135RS125AK39 951501266

I/PRO80HB 951500364 I135RC100ATGB39 951501805 I135RS125AK57 951501237

I/PRO80HG 951500367 I135RC100TSB39 951501839 I135RS125AKGB39 951501430

I/PRO80PG 951500356 I135RC100TSG39 951501829 I135RS125AKGB57 951501424

I/PRO80SP 951500359 I135RC100TSOB39 951501848 I135RS125AM57 951501219

I/PRO80W 951500347 I135RC125ACGB39 951501752 I135RS125AMGB39 951501428

I135/AHK1S/ACG 951501782 I135RC125AE39 951501620 I135RS125AMGB57 951501422

I135/AHK1S/ACGB 951501739 I135RC125AK39 951501630 I135RS125AT39 951501255

I135/AHK1S/AE 951501635 I135RC125AKGB39 951501754 I135RS125AT57 951501223

I135/AHK1S/AGRB 951501737 I135RC125AM39 951501622 I135RS125ATGB39 951501431

I135/AHK1S/AK 951501659 I135RC125AMGB39 951501750 I135RS80ABGB39 951501441

I135/AHK1S/AKG 951501785 I135RC125AT39 951501624 I135RS80ACGB39 951501469

I135/AHK1S/AKGB 951501740 I135RC125ATGB39 951501756 I135RS80ACGB57 951501439

I135/AHK1S/AM 951501637 I135RC125TSB39 951501835 I135RS80AE39 951501248

I135/AHK1S/AMG 951501786 I135RC125TSG39 951501828 I135RS80AE57 951501216

I135/AHK1S/AMGB 951501738 I135RC125TSOB39 951501847 I135RS80AK39 951501252

I135/AHK1S/AT 951501636 I135RC80ACGB39 951501796 I135RS80AK57 951501218

I135/AHK1S/ATG 951501783 I135RC80AE39 951501663 I135RS80AKGB39 951501470

I135/AHK1S/ATGB 951501741 I135RC80AK39 951501603 I135RS80AKGB57 951501421

I135/AHK1S/TSB 951501882 I135RC80AKGB39 951501731 I135RS80AM57 951501232

I135/AHK1S/TSG 951501873 I135RC80AM39 951501604 I135RS80AMGB39 951501468

I135/AHK1S/TSOB 951501881 I135RC80AMGB39 951501797 I135RS80AMGB57 951501438

I135/AHKA/ACGB 100115088 I135RC80AT39 951501664 I135RS80AT39 951501265

I135/AHKA/AE 100115096 I135RC80ATGB39 951501730 I135RS80AT57 951501234

I135/AHKA/AT 951200264 I135RC80TSB39 951501852 I135RS80ATGB39 951501471

I135/AHKA/ATGB 100115070 I135RC80TSG39 951501843 I2L/RO100ABGB 100040245

I135/EBHK2R18 100115351 I135RC80TSOB39 951501856 I2L/RO100ACG 951500823

I135/EHK2R18 100115369 I135RS100ABGB39 951501449 I2L/RO100ACGB 951501056

I135/HKUR10E 100115500 I135RS100ACGB39 951501455 I2L/RO100AE 951500898

I135/HKUR10EB 100115567 I135RS100ACGB57 951501403 I2L/RO100AGR 951500866

I135/PHK1S/BH 951500415 I135RS100AE39 951501242 I2L/RO100AGSB 951501166

I135/PHK1S/BW 951500418 I135RS100AE57 951501209 I2L/RO100AGSG 951500852

I135/PHK1S/G 951500408 I135RS100AK39 951501267 I2L/RO100AK 951500858

I135/PHK1S/HB 951500413 I135RS100AK57 951501238 I2L/RO100AKG 951500900

I135/PHK1S/PG 951500398 I135RS100AKGB39 951501458 I2L/RO100AKGB 951501169

I135/PHK1S/SP 951500410 I135RS100AKGB57 951501406 I2L/RO100AM 951500850

I135/PHK1S/W 951500399 I135RS100AM57 951501220 I2L/RO100AMG 951500856

I135/SS110EB39 100121102 I135RS100AMGB39 951501452 I2L/RO100AMGB 951501164


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


I2L/RO100AT 951500868 I90/AHK1S/AKGB 951501784 I90RC80ACGB39 951501803

I2L/RO100ATG 951500854 I90/AHK1S/AM 951501633 I90RC80AE39 951501639

I2L/RO100ATGB 951501142 I90/AHK1S/AMG 951501780 I90RC80AK39 951501656

I2L/RO125ABGB 951501165 I90/AHK1S/AMGB 951501736 I90RC80AKGB39 951501802

I2L/RO125ACG 951500819 I90/AHK1S/AT 100046424 I90RC80AM39 951501641

I2L/RO125ACGB 951501060 I90/AHK1S/ATG 951501781 I90RC80AMGB39 951501799

I2L/RO125AE 951500899 I90/AHK1S/ATGB 951501788 I90RC80AT39 951501643

I2L/RO125AGR 951500865 I90/AHK1S/TSB 951501878 I90RC80ATGB39 951501804

I2L/RO125AGSB 951501167 I90/AHK1S/TSG 951501874 I90RC80TSB39 951501840

I2L/RO125AGSG 951500861 I90/AHK1S/TSOB 951501879 I90RC80TSG39 951501830

I2L/RO125AK 951500857 I90/AHKA/ACGB 100115211 I90RC80TSOB39 951501849

I2L/RO125AKG 951500901 I90/AHKA/AE 100048297 I90RS100ABGB39 951501464

I2L/RO125AKGB 951501168 I90/AHKA/AT 100115237 I90RS100ACGB39 951501466

I2L/RO125AM 951500902 I90/AHKA/ATGB 100115229 I90RS100ACGB57 951501416

I2L/RO125AMG 951500855 I90/PHK1S/BH 951500429 I90RS100AE39 951501261

I2L/RO125AMGB 951501163 I90/PHK1S/BW 951500420 I90RS100AE57 951501235

I2L/RO125AT 951500867 I90/PHK1S/G 951500405 I90RS100AK39 951501258

I2L/RO125ATG 951500853 I90/PHK1S/HB 951500419 I90RS100AK57 951501226

I2L/RO125ATGB 951501171 I90/PHK1S/PG 951500428 I90RS100AKGB39 951501432

I2L/RO80ABGB 951501161 I90/PHK1S/SP 951500407 I90RS100AKGB57 951501418

I2L/RO80ACG 951500818 I90/PHK1S/W 951500401 I90RS100AM57 951501212

I2L/RO80ACGB 951501059 I90/SS110EB39 100121086 I90RS100AMGB39 951501465

I2L/RO80AE 951500863 I90/SS125EB39 100121078 I90RS100AMGB57 951501414

I2L/RO80AGR 951500869 I90/SS60EB39 100121110 I90RS100AT39 951501245

I2L/RO80AGSB 951501160 I90/SS90EB39 100121128 I90RS100AT57 951501214

I2L/RO80AGSG 951500859 I90RC100ACGB39 951501763 I90RS100ATGB39 951501440

I2L/RO80AK 951500849 I90RC100AE39 951501609 I90RS125ABGB39 951501410

I2L/RO80AKG 951500860 I90RC100AK39 951501615 I90RS125ACGB39 951501417

I2L/RO80AKGB 951501159 I90RC100AKGB39 951501764 I90RS125ACGB57 951501394

I2L/RO80AM 951500864 I90RC100AM39 951501610 I90RS125AE39 951501236

I2L/RO80AMG 951500851 I90RC100AMGB39 951501762 I90RS125AE57 951501206

I2L/RO80AMGB 951501158 I90RC100AT39 951501611 I90RS125AK39 951501228

I2L/RO80AT 951500870 I90RC100ATGB39 951501765 I90RS125AK57 951501202

I2L/RO80ATG 951500897 I90RC100TSB39 951501827 I90RS125AKGB39 951501419

I2L/RO80ATGB 951501162 I90RC100TSG39 951501837 I90RS125AKGB57 951501395

I2S/RO100E/V2A 951502305 I90RC100TSOB39 951501834 I90RS125AM57 951501194

I2S/RO100EB/V2A 951502306 I90RC125ACGB39 951501759 I90RS125AMGB39 951501415

I2S/RO125E/V2A 951502303 I90RC125AE39 951501605 I90RS125AMGB57 951501393

I2S/RO125EB/V2A 951502304 I90RC125AK39 951501608 I90RS125AT39 951501213

I2S/RO80E/V2A 951502302 I90RC125AKGB39 951501760 I90RS125AT57 951501195

I2S/RO80EB/V2A 951502301 I90RC125AM39 951501606 I90RS125ATGB39 951501420

I90/AHK1S/ACG 951501778 I90RC125AMGB39 951501758 I90RS80ABGB39 951501450

I90/AHK1S/ACGB 951501787 I90RC125AT39 951501607 I90RS80ACGB39 951501456

I90/AHK1S/AE 951501632 I90RC125ATGB39 951501761 I90RS80ACGB57 951501404

I90/AHK1S/AGRB 951501789 I90RC125TSB39 951501838 I90RS80AE39 951501243

I90/AHK1S/AK 951501657 I90RC125TSG39 951501836 I90RS80AE57 951501211

I90/AHK1S/AKG 951501779 I90RC125TSOB39 951501833 I90RS80AK39 951501184


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


I90RS80AK57 951501240 IN110ACG 100112176 IV/RO60ABGB 951500764

I90RS80AKGB39 951501459 IN110AE 100112184 IV/RO60ACG 951500669

I90RS80AKGB57 951501407 IN125ACG 100112119 IV/RO60ACGB 951500762

I90RS80AM57 951501221 IN125AE 100112127 IV/RO60AE 951500617

I90RS80AMGB39 951501453 IN80ACG 100112150 IV/RO60AGR 951500601

I90RS80AMGB57 951501413 IN80AE 100112168 IV/RO60AGSB 951500738

I90RS80AT39 951501257 ISK/RO100E/38 100127075 IV/RO60AGSG 951500702

I90RS80AT57 951501225 ISK/RO125E/38 100127083 IV/RO60AK 951500633

I90RS80ATGB39 951501462 ISK/RO80E/38 100127091 IV/RO60AKG 951500671

ID/RO100BH 951500498 IV/RO100ABGB 951500763 IV/RO60AKGB 951500760

ID/RO100BW 951500463 IV/RO100ACG 951500668 IV/RO60AM 951500619

ID/RO100E 951500611 IV/RO100ACGB 951500761 IV/RO60AMG 951500673

ID/RO100G 951500461 IV/RO100AE 951500616 IV/RO60AMGB 951500758

ID/RO100HB 951500471 IV/RO100AGR 951500624 IV/RO60AT 951500632

ID/RO100HG 951500473 IV/RO100AGSB 951500772 IV/RO60ATG 951500677

ID/RO100PG 951500465 IV/RO100AGSG 951500703 IV/RO60ATGB 951500756

ID/RO100SP 951500467 IV/RO100AK 951500635 IV/RO80ABGB 951500747

ID/RO100W 951500475 IV/RO100AKG 951500670 IV/RO80ACG 951500678

ID/RO125BH 951500452 IV/RO100AKGB 951500759 IV/RO80ACGB 951500744

ID/RO125BW 951500439 IV/RO100AM 951500618 IV/RO80AE 951500621

ID/RO125E 951500610 IV/RO100AMG 951500672 IV/RO80AGR 951500606

ID/RO125G 951500438 IV/RO100AMGB 951500757 IV/RO80AGSB 951500740

ID/RO125HB 951500443 IV/RO100AT 951500631 IV/RO80AGSG 951500705

ID/RO125HG 951500444 IV/RO100ATG 951500674 IV/RO80AK 951500628

ID/RO125PG 951500440 IV/RO100ATGB 951500785 IV/RO80AKG 951500681

ID/RO125SP 951500441 IV/RO100TSB 951500806 IV/RO80AKGB 951500769

ID/RO125W 951500445 IV/RO100TSG 951500805 IV/RO80AM 951500602

ID/RO60BH 951500499 IV/RO100TSOB 951500807 IV/RO80AMG 951500684

ID/RO60BW 951500464 IV/RO125ABGB 951500779 IV/RO80AMGB 951500766

ID/RO60E 951500627 IV/RO125ACG 951500675 IV/RO80AT 951500640

ID/RO60G 951500462 IV/RO125ACGB 951500778 IV/RO80ATG 951500693

ID/RO60HB 951500472 IV/RO125AE 951500596 IV/RO80ATGB 951500741

ID/RO60HG 951500474 IV/RO125AGR 951500625 IV/RO80TSB 951500810

ID/RO60PG 951500466 IV/RO125AGSB 951500776 IV/RO80TSG 951500808

ID/RO60SP 951500468 IV/RO125AGSG 951500700 IV/RO80TSOB 951500796

ID/RO60W 951500476 IV/RO125AK 951500613 K15V2A/150 100115674

ID/RO80BH 951500500 IV/RO125AKG 951500676 K15V2A/250 100115708

ID/RO80BW 951500477 IV/RO125AKGB 951500777 K15V2AEB/150 100115682

ID/RO80E 951500636 IV/RO125AM 951500597 K15V2AEB/250 100115690

ID/RO80G 951500469 IV/RO125AMG 951500666 K32ES 100115666

ID/RO80HB 951500493 IV/RO125AMGB 951500775 K32ES/150 100115716

ID/RO80HG 951500495 IV/RO125AT 951500595 K32V2A/150 951502355

ID/RO80PG 951500479 IV/RO125ATG 951500667 K32V2A/200 951502498

ID/RO80SP 951500481 IV/RO125ATGB 951500774 K32V2A/250 951502629

ID/RO80W 951500486 IV/RO125TSB 951500800 K32V2AEB/150 951502482

IN100ACG 100112135 IV/RO125TSG 951500809 K32V2AEB/200 951502643

IN100AE 100112143 IV/RO125TSOB 951500802 K32V2AEB/250 951502757


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


K50V2A/150 951502469 KDAR/ABS/AMGB 951502971 KK122ABSECS 100126614

K50V2A/200 951502641 KDAR/ABS/ATGB 951502970 KK122ABSEOB 951503007

K50V2A/250 951502755 KDAR/ABS/E 951502930 KK122PVCAKGB 951503014

K50V2AEB/150 951502630 KDAR/ABS/EOB 951502973 KK122PVCAMGB 951503012

K50V2AEB/200 951502764 KEBA100/125 951502772 KK122PVCATGB 951503010

K50V2AEB/250 951502934 KEBA100/125/10M 951502269 KK122PVCE 951503006

KB121220812 951200271 KEBA100/125/5M 951501671 KK122PVCECS 100126622

KB12SN305152A 100119908 KEBA100/185 951502962 KK122PVCEOB 951503008

KB12SN305305A 100119890 KEBA100/185/5M 951501948 KK183 951503037

KB12SN305508A1 100007863 KEBA100/250 951502984 KK183ABSAKGB 951503045

KB12SN305711A1 100046416 KEBA100/250/5M 951502104 KK183ABSAMGB 951503044

KBZS35GT32Z 951200267 KERDI200 951503028 KK183ABSATGB 951503043

KD/TPSCRW 951500394 KERDI200/10M 951502986 KK183ABSE 951503038

KD/TPWRCH 951500814 KERDI200/20M 951503002 KK183ABSECS 100126630

KD2/6E/GR 100112309 KERDI200/5M 951502756 KK183ABSEOB 951503040

KD2/6RE/GR 100112317 KERDIFIX/BW 951501861 KK183PVCAKGB 951503046

KD2/ABS/6E 951502964 KERDIFIX/G 951200269 KK183PVCAMGB 951503047

KD2/ABS/6RE 951502963 KERECK/FA10 951502591 KK183PVCATGB 951503042

KD2/ABS/AKGB 951502976 KERECK/FA2 951500990 KK183PVCE 951503039

KD2/ABS/AMGB 951502977 KERECK/FI10 951502329 KK183PVCECS 100126648

KD2/ABS/ATGB 951502978 KERECK/FI2 951500726 KK183PVCEOB 951503041

KD2/ABS/E 951502929 KERECK135FI10 100112333 KK81152 951503003

KD2/ABS/ECS 100046408 KERECK135FI2 100110105 KK81152ABSAKGB 951503023

KD2/ABS/EOB 951502967 KERS20L 100112341 KK81152ABSAMGB 951503024

KD2/ABS/FL 100112200 KERS20R 100112366 KK81152ABSATGB 951503025

KD2/AKGB/GR 100112259 KERS28L 100112358 KK81152ABSE 951503015

KD2/AMGB/GR 100112242 KERS28R 100112374 KK81152ABSECS 100126572

KD2/ATGB/GR 100112267 KERSB135K 100112408 KK81152ABSEOB 951503018

KD2/E/GR 100112275 KERSB135K5LR 100112390 KK81152PVCAKGB 951503022

KD2/ECS/GR 100112291 KERSB135KLR 100112382 KK81152PVCAMGB 951503021

KD2/EOB/GR 100112283 KHK15E 100115724 KK81152PVCATGB 951503020

KD2/PVC/6E 951502965 KHK15E/150 100115740 KK81152PVCE 951503016

KD2/PVC/6RE 951502966 KHK15E/200 100115765 KK81152PVCECS 100126606

KD2/PVC/AKGB 951502975 KHK15EB 100115773 KK81152PVCEOB 951503019

KD2/PVC/AMGB 951502969 KHK15EB/150 100115732 KKB81152 951503004

KD2/PVC/ATGB 951502974 KHK15EB/200 100115757 KKB81152ABSAKGB 951503035

KD2/PVC/E 951502931 KI15E 100115914 KKB81152ABSAMGB 951503032

KD2/PVC/ECS 100112325 KI15E/150 100115872 KKB81152ABSATGB 951503030

KD2/PVC/EOB 951502968 KI15E/200 100115898 KKB81152ABSE 951503026

KD2/PVC/FL 100112226 KI15EB 100115906 KKB81152ABSECS 100126580

KD3/ABS/6E 951502980 KI15EB/150 100115864 KKB81152ABSEOB 951503029

KD3/ABS/6RE 951502979 KI15EB/200 100115880 KKB81152PVCAKGB 951503036

KD3/ABS/FL 100112218 KK122 951503000 KKB81152PVCAMGB 951503034

KD3/PVC/6E 951502981 KK122ABSAKGB 951503013 KKB81152PVCATGB 951503031

KD3/PVC/6RE 951502982 KK122ABSAMGB 951503011 KKB81152PVCE 951503027

KD3/PVC/FL 100112234 KK122ABSATGB 951503009 KKB81152PVCECS 100126598

KDAR/ABS/AKGB 951502972 KK122ABSE 951503005 KKB81152PVCEOB 951503033


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


KLAR19EB100 100112564 KLDRE130 100112614 KSE/HB 951500786

KLAR19EB110 100112572 KLDRE140 100080506 KSE/PG 951500787

KLAR19EB120 100112580 KLDRE150 100084391 KSE/SP 951500789

KLAR19EB130 100112598 KLDRE160 100112648 KSL1000 100126564

KLAR19EB140 100112622 KLDRE170 100112671 KSL1000S 100088988

KLAR19EB150 100084367 KLDRE180 100039213 KSL1400 100056431

KLAR19EB160 100054550 KLDRE50 100126424 KSL1400S 953400165

KLAR19EB170 100112655 KLDRE60 100070747 M100 951501986

KLAR19EB180 100039197 KLDRE70 100040252 M110 951501992

KLAR19EB50 100112556 KLDRE80 951503067 M110D 100114818

KLAR19EB60 100095371 KLDRE90 951200279 M125 951502005

KLAR19EB70 100101914 KLDROE100 100126507 M125D 951502160

KLAR19EB80 951503074 KLDROE110 100126523 M150 951502091

KLAR19EB90 100029479 KLDROE120 100126549 M160 951502097

KLAR30EB100 100112465 KLDROE70 100126432 M175 951502119

KLAR30EB110 100112473 KLDROE80 100095363 M200 951502140

KLAR30EB120 100112481 KLDROE90 100126473 M225 951502345

KLAR30EB50 100112416 KLV60E100 100054527 M250 951502358

KLAR30EB60 100112424 KLV60E110 100048537 M30 951501696

KLAR30EB70 100112432 KLV60E120 951400177 M300 951502425

KLAR30EB80 100112440 KLV60E130 100095165 M45 951501871

KLAR30EB90 100112457 KLV60E140 100056563 M60 951501916

KLB19EB100 100054535 KLV60E150 100084383 M80 951501969

KLB19EB110 100048529 KLV60E160 100054543 M90 951501980

KLB19EB120 100007905 KLV60E170 100126556 M90D 100114792

KLB19EB130 100112606 KLV60E180 100039189 MC100 951502590

KLB19EB140 100056571 KLV60E50 951200278 MC110D 100114800

KLB19EB150 100084375 KLV60E60 100062322 MC125 951502597

KLB19EB160 100112630 KLV60E70 100040260 MC125D 951502644

KLB19EB170 100112663 KLV60E80 951503068 MC60 951502558

KLB19EB180 100039205 KLV60E90 951200280 MC80 951502576

KLB19EB50 951200277 KLVO60E100 100126481 MC80D 951502633

KLB19EB60 100062314 KLVO60E110 100126515 MC90D 100114784

KLB19EB70 100126457 KLVO60E120 100126531 MTK100 951502067

KLB19EB80 100053735 KLVO60E70 100126440 MTK125 951502376

KLB19EB90 100114636 KLVO60E80 100095355 MTK80 951502008

KLB30EB100 100112531 KLVO60E90 100126465 MU100 951502398

KLB30EB110 100112549 KM5117/22 951500718 MU125 951502490

KLB30EB120 100106400 KMS185/12 951500696 MU150 951502540

KLB30EB50 100112499 KMS185/20 951500697 MU80 951502293

KLB30EB60 100112507 KMSMV235/114 951503070 NB10B 951502515

KLB30EB70 100112515 KSAE/G 951500909 NB10B/150 951502214

KLB30EB80 100092188 KSAE/GS 951500912 NB10S 951502283

KLB30EB90 100112523 KSAE/HB 951500910 NB10S/150 951501905

KLDRE100 100126499 KSAE/PG 951500911 NB10SE 951502494

KLDRE110 100061803 KSE/G 951500788 NB10SE/150 951502171

KLDRE120 953400164 KSE/GS 951500790 NB12B 951502535


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


NB12B/150 951502253 PRO100PG 951500647 Q140E 951502436

NB12S 951502348 PRO100SP 951500645 Q140EB 951502599

NB12S/150 951501927 PRO100W 951500643 Q150AE 951501601

NB12SE 951502519 PRO60BH 951500582 Q150E 951502446

NB12SE/150 951502195 PRO60BW 951500576 Q150EB 951502618

NB15B 951502568 PRO60G 951500578 Q200AE 951501697

NB15B/150 951502315 PRO60GS 951500581 Q45ACG 951501359

NB25B 951502580 PRO60HB 951500575 Q45AE 951500953

NB25B/150 951502339 PRO60HG 951500577 Q45AT 951501047

NB8B 951502485 PRO60PG 951500583 Q45E 100126671

NB8B/150 951502151 PRO60SP 951500580 Q60ABGB 951501569

NB8S 951502250 PRO60W 951500579 Q60ACG 951501513

NB8S/150 951501867 PRO80BH 951500591 Q60AE 951500989

NB8SE 951502471 PRO80BW 951500592 Q60AT 951501114

NB8SE/150 951502139 PRO80G 951500585 Q60E 951502235

PG100 951500560 PRO80GS 951500584 Q60EB 951502465

PG125 951500571 PRO80HB 951500590 Q80ABGB 951501586

PG45 951500531 PRO80HG 951500587 Q80ACG 951501668

PG60 951500542 PRO80PG 951500588 Q80AE 951501112

PG80 951500552 PRO80SP 951500589 Q80AT 951501318

PHK1S100BH 951501481 PRO80W 951500586 Q80E 951502320

PHK1S100BW 951501487 PS90/45EK 100127471 Q80EB 951502510

PHK1S100G 951501488 PSF 100009414 Q80TSB 951502052

PHK1S100HB 951501478 Q100ABGB 951501712 Q80TSG 951502053

PHK1S100PG 951501480 Q100ACG 951501718 Q80TSOB 951502051

PHK1S100SP 951501489 Q100AE 951501333 Q90E 951502353

PHK1S100W 951501479 Q100AT 951501356 Q90EB 951502529

PHK1S125BH 951501505 Q100E 951502383 QF8/50ABGB 951502322

PHK1S125BW 951501507 Q100EB 951502547 QF8/50ACG 100126689

PHK1S125G 951501508 Q100TSB 951502088 QF8/50AE 951501991

PHK1S125HB 951501506 Q100TSG 951502087 QF8/50AT 951502012

PHK1S125PG 951501511 Q100TSOB 951502086 R/A100 951501039

PHK1S125SP 951501509 Q110E 951502410 R/A100ABGB 100106798

PHK1S125W 951501510 Q110EB 951502569 R/A100ACB 100120088

PHK1S80BH 951501336 Q125ABGB 951501862 R/A100ACG 100106780

PHK1S80BW 951501338 Q125ABGBK 100126705 R/A100ACGB 100119692

PHK1S80G 951501339 Q125ACG 951501924 R/A100AK 100119718

PHK1S80HB 951501340 Q125ACGK 100060623 R/A100AKB 100120294

PHK1S80PG 951501335 Q125AE 951501515 R/A100AKGB 100119866

PHK1S80SP 951501337 Q125AEK 100126713 R/A100AM 100119726

PHK1S80W 951501334 Q125AT 951501564 R/A100AMB 100120070

PRO100BH 951500649 Q125ATK 100126721 R/A100AMGB 100119742

PRO100BW 951500648 Q125E 951502426 R/A100AT 100050012

PRO100G 951500646 Q125EB 951502588 R/A100ATB 100120096

PRO100GS 951500644 Q125TSB 951502107 R/A100ATGB 100119700

PRO100HB 951500642 Q125TSG 951502108 R/A110 100120146

PRO100HG 951500641 Q125TSOB 951502106 R/A125 951501084


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


R/A125ABGB 100053149 R/A80AM 100119783 R/ATK80ATGB 100126952

R/A125ACB 100127158 R/A80AMB 100120328 R/E100 951502165

R/A125ACG 100101476 R/A80AMGB 100119809 R/E100EB 100120302

R/A125ACGB 100119585 R/A80AT 100119791 R/E110 100120179

R/A125AK 100119601 R/A80ATB 100120344 R/E125 951502189

R/A125AKB 100127190 R/A80ATGB 100119767 R/E125EB 100127182

R/A125AKGB 100119833 R/A90 100127356 R/E140 100127455

R/A125AM 100119619 R/AE100 951501526 R/E150 100120252

R/A125AMB 100127174 R/AE110 100120153 R/E160 100120138

R/A125AMGB 100119577 R/AE125 951501585 R/E175 100127331

R/A125AT 100119627 R/AE140 100127463 R/E20 100120021

R/A125ATB 100127166 R/AE150 100120237 R/E200 100120054

R/A125ATGB 100119593 R/AE160 100120112 R/E225 100120211

R/A140 100127448 R/AE175 100127315 R/E250 100127141

R/A150 100120229 R/AE20 100120013 R/E30 100127281

R/A160 100120104 R/AE200 100120047 R/E300 100127422

R/A175 100127307 R/AE210 100127414 R/E45 100119999

R/A20 100120005 R/AE225 100120195 R/E60 951502074

R/A200 100120039 R/AE250 100127125 R/E60EB 100127240

R/A210 100127398 R/AE275 100127349 R/E70 100120286

R/A225 100120187 R/AE30 100127265 R/E80 951502105

R/A250 100127117 R/AE300 100127430 R/E80EB 100120351

R/A275 100127299 R/AE45 100119973 R/E90 100127380

R/A30 100127257 R/AE60 951501358 R/M100 951502112

R/A300 100127406 R/AE70 100120278 R/M110 100120161

R/A45 100119965 R/AE80 951501514 R/M125 951502155

R/A60 951500948 R/AE90 100127364 R/M150 100120245

R/A60ABGB 100119841 R/AETK100 100126895 R/M160 100120120

R/A60ACB 100127216 R/AETK60 100126820 R/M175 100127323

R/A60ACGB 100119643 R/AETK80 100126994 R/M200 100120062

R/A60AK 100119668 R/ATK100ABGB 100126846 R/M225 100120203

R/A60AKB 100127232 R/ATK100ACB 100126838 R/M250 100127133

R/A60AKGB 100119817 R/ATK100AK 100126903 R/M30 100127273

R/A60AM 100119676 R/ATK100AKGB 100126853 R/M45 100119981

R/A60AMB 100127208 R/ATK100AMB 100126879 R/M60 951502018

R/A60AMGB 100119635 R/ATK100AT 100126911 R/M80 951502093

R/A60AT 100119684 R/ATK100ATGB 100126861 R/M90 100127372

R/A60ATB 100127224 R/ATK60ACB 100126812 R/MTK100 100126887

R/A60ATGB 100119650 R/ATK60AK 100127018 R/MTK80 100126986

R/A70 100120260 R/ATK60AMB 100126804 RC100ACGB39 951502369

R/A80 951500978 R/ATK60AT 100126796 RC100AE39 951502264

R/A80ABGB 100119874 R/ATK80ABGB 100126945 RC100AK39 951502357

R/A80ACB 100120336 R/ATK80ACB 100126929 RC100AKGB39 951502420

R/A80ACGB 100119759 R/ATK80AK 100126978 RC100AM39 951502299

R/A80AK 100119775 R/ATK80AKGB 100126937 RC100AMGB39 951502368

R/A80AKB 100120310 R/ATK80AMB 100126960 RC100AT39 951502356

R/A80AKGB 100119882 R/ATK80AT 100127000 RC100ATGB39 951502421


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


RC100TSB39 951502504 RO100HB 951501576 RO60AE 951500951

RC100TSG39 951502503 RO100HG 951501571 RO60AGR 951501046

RC100TSOB39 951502502 RO100MC 951502792 RO60AGSB 951501541

RC125ACGB39 951502400 RO100PG 951501573 RO60AGSG 951501504

RC125AE39 951502318 RO100SP 951501578 RO60AK 951501040

RC125AK39 951502389 RO100TSB 951502084 RO60AKG 951501502

RC125AKGB39 951502422 RO100TSG 951502085 RO60AKGB 951501547

RC125AM39 951502344 RO100TSOB 951502083 RO60AM 951501044

RC125AMGB39 951502399 RO100W 951501579 RO60AMG 951501350

RC125AT39 951502388 RO110E 951502326 RO60AMGB 951501497

RC125ATGB39 951502423 RO110EB 951502508 RO60AT 951500973

RC125TSB39 951502525 RO125ABGB 951501935 RO60ATG 951501503

RC125TSG39 951502524 RO125ACG 951501864 RO60ATGB 951501548

RC125TSOB39 951502523 RO125ACGB 951501901 RO60BH 951501289

RC80ACGB39 951502361 RO125AE 951501371 RO60BW 951501296

RC80AE39 951502239 RO125AGR 951501368 RO60E 951502147

RC80AK39 951502343 RO125AGSB 951501923 RO60EB 951502453

RC80AKGB39 951502408 RO125AGSG 951501920 RO60G 951501290

RC80AM39 951502273 RO125AK 951501370 RO60HB 951501293

RC80AMGB39 951502362 RO125AKG 951501921 RO60HG 951501294

RC80AT39 951502342 RO125AKGB 951501937 RO60MC 951502753

RC80ATGB39 951502409 RO125AM 951501694 RO60PG 951501291

RC80TSB39 951502477 RO125AMG 951501892 RO60SP 951501295

RC80TSG39 951502476 RO125AMGB 951501918 RO60W 951501292

RC80TSOB39 951502470 RO125AT 951501369 RO70E 951502181

REMA 951500724 RO125ATG 951501919 RO70EB 951502462

RO100ABGB 951501817 RO125ATGB 951501936 RO80ABGB 951501683

RO100ACG 951501669 RO125BH 951501887 RO80ACG 951501517

RO100ACGB 951501693 RO125BW 951501886 RO80ACGB 951501546

RO100AE 951501310 RO125E 951502354 RO80AE 951501045

RO100AGR 951501325 RO125EB 951502526 RO80AGR 951501181

RO100AGSB 951501819 RO125G 951501889 RO80AGSB 951501678

RO100AGSG 951501715 RO125HB 951501885 RO80AGSG 951501545

RO100AK 951501320 RO125HG 951501884 RO80AK 951501182

RO100AKG 951501714 RO125MC 951502843 RO80AKG 951501542

RO100AKGB 951501820 RO125PG 951501890 RO80AKGB 951501679

RO100AM 951501518 RO125SP 951501891 RO80AM 951501324

RO100AMG 951501692 RO125TSB 951502101 RO80AMG 951501543

RO100AMGB 951501722 RO125TSG 951502102 RO80AMGB 951501592

RO100AT 951501275 RO125TSOB 951502100 RO80AT 951501066

RO100ATG 951501721 RO125W 951501888 RO80ATG 951501544

RO100ATGB 951501818 RO150E 951502427 RO80ATGB 951501680

RO100BH 951501572 RO150EB 951502574 RO80BH 951501482

RO100BW 951501577 RO45E 951502098 RO80BW 951501483

RO100E 951502292 RO60ABGB 951501540 RO80E 951502221

RO100EB 951502501 RO60ACG 951501322 RO80EB 951502467

RO100G 951501574 RO60ACGB 951501349 RO80G 951501485


A P P E N D I X

Schluter Item No.


Schluter Item No.


Schluter Item No.


RO80HB 951501476 RS80AK57 951502125 SPWSK52AE 100 100120476

RO80HG 951501484 RS80AKGB39 951502364 SPWSL30T 100120500

RO80MC 951502771 RS80AKGB57 951502384 SPWSL30T 100 100120468

RO80PG 951501490 RS80AM57 951502124 SR122 951502444

RO80SP 951501486 RS80AMGB39 951502367 SS100AE30 100120377

RO80TSB 951502032 RS80AMGB57 951502385 SS100AE39 100120849

RO80TSG 951502033 RS80AT39 951502095 SS100AT30 100120401

RO80TSOB 951502031 RS80AT57 951502123 SS100AT39 100120880

RO80W 951501477 RS80ATGB39 951502363 SS110EB30 100120997

RO90E 951502259 SB29107 951502994 SS110EB39 100120914

RO90EB 951502488 SB29122 951502996 SS125AE30 100120369

RS100ABGB39 951502381 SB2981 951502987 SS125AE39 100120831

RS100ACGB39 951502379 SB41 951502797 SS125AT30 100120393

RS100ACGB57 951502395 SB41122 951503001 SS125AT39 100120872

RS100AE39 951502109 SB4181 951502995 SS125EB11 100120948

RS100AE57 951502144 SC122 951502445 SS125EB30 100120971

RS100AK39 951502110 SG100ACB12 100114925 SS125EB39 100120815

RS100AK57 951502143 SG100AE12 100114933 SS150AE30 100120419

RS100AKGB39 951502378 SG110ACB12 100114966 SS150AE39 100120864

RS100AKGB57 951502393 SG110AE12 100114974 SS150AT30 100120799

RS100AM57 951502146 SG125ACB12 100114909 SS150AT39 100120906

RS100AMGB39 951502380 SG125AE12 100114917 SS60EB11 100120773

RS100AMGB57 951502394 SG80ACB12 100114941 SS60EB39 100120823

RS100AT39 951502111 SG80AE12 100114958 SS80AE30 100120385

RS100AT57 951502145 SP100 951500564 SS80AE39 100120856

RS100ATGB39 951502377 SP125 951500569 SS80AT30 100120427

RS125ABGB39 951502406 SP45 951500532 SS80AT39 100120898

RS125ACGB39 951502405 SP60 951500539 SS90EB30 100120989

RS125ACGB57 951502417 SP80 951500551 SS90EB39 100120922

RS125AE39 951502157 SPRA23EB/100 100126747 ST122 951502596

RS125AE57 951502188 SPRA23EB/140 100126754 ST-183 951502985

RS125AK39 951502158 SPRA33EB/100 100126739 ST-81/152 951502658

RS125AK57 951502187 SPRA33EB/140 951503072 ST-81/152BR 951502747

RS125AKGB39 951502403 SPSA50EB/120 951503071 T9/14AE 951500727

RS125AKGB57 951502419 SPSA50EB/160 100127489 T9/14AK 951500734

RS125AM57 951502186 SPSA50EB/200 100127497 T9/14AM 951500731

RS125AMGB39 951502404 SPSB100EB/120 100127513 T9/14AT 951500736

RS125AMGB57 951502418 SPSB100EB/160 100127521 T9/14E 951501900

RS125AT39 951502159 SPSB100EB/200 100127539 T9/14EB 951501942

RS125AT57 951502185 SPSB125EB/120 100087915 T9/14M 951501341

RS125ATGB39 951502402 SPSB125EB/160 100087923 T9/25AE 951501042

RS80ABGB39 951502366 SPSB125EB/200 100127505 T9/25AK 951501352

RS80ACGB39 951502365 SPWS19AE 100120443 T9/25AM 951501067

RS80ACGB57 951502386 SPWS19AE 100 100120435 T9/25AT 951501351

RS80AE39 951502094 SPWSC16GS 100120492 T9/25E 951502113

RS80AE57 951502122 SPWSC16GS 100 100120450 T9/25EB 951502231

RS80AK39 951502096 SPWSK52AE 100119320 T9/25M 951501990


A P P E N D I X

Schluter Item No.


Schluter Item No.


TAPR61AE 951501915 W100 951500557

TAPR61AE/150 951501126 W125 951500573

TE110 951502272 W45 951500534

TE110/150 951501895 W60 951500540

TE160 951502323 W80 951500550

TE160/150 951501922

TE20 951502182

TE20/150 951501723

TE250 951502387

TE250/150 951501979

TE50 951502218

TE50/150 951501816

TE80 951502240

TE80/150 951501865

TEK 951502270

TEK/150 951501859

TRL-DIT 951501940

TRL-KER 951501939

TROBA-MA 951501475

TROBA-PLUS8 951502993

TROBA-RO 951502998

V/AHK 951500437

V/EBHK 951500722

V/EHK 951500662

V/HK 951500329

V/HKUR10E 100115484

V/HKUR10EB 100115476

V/HKUR36E 100115401

V/KHK15E 100115856

V/KHK15EB 100115849

V/KLEB35 100029487

V/PHK 951500328

V/RO100 951500337

V/RO100E 951500536

V/RO125 951500338

V/RO125E 951500537

V/RO80 951500336

V/RO80E 951500538

V/SS110EB30 100120781

V/SS110EB39 100121144

V/SS125B39 100121045

V/SS125EB11 100120955

V/SS125EB30 100121003

V/SS60EB11 100120963

V/SS60EB39 100120930

V/SS90EB30 100120807

V/SS90EB39 100121136


N O T E S


Schluter®-Systems Tools 2-Year Limited Warranty

COVERAGE AND CONDITIONS: Subject to the conditions and limitations as stated hereinafter, Schluter®-Systems* warrants that Schluter®-Systems Tools (the “Products”)** will be free from manufacturing defects in materials and workmanship for a period of two (2) years from the date of purchase only when the Products have been used for their intended purpose in accordance with the Schluter®-Systems Illustrated Price List. Abnormal use, including but not limited to, misuse, accident, modification, unreasonable use, abuse, neglect, lack of maintenance, or use after the product is significantly worn, is not covered by this warranty. Consumable Products or consumable parts of Products are warranted, at the time of sale, only against defects in workmanship or materials that prevent their use. Consumable products or parts are goods reasonably expected to be used up or damaged during normal use, including but not limited to trowels, cutting blades, and cutting wheels. This warranty does not cover normal wear and tear or defects revealed by normal wear and tear.

RESOLUTION: If the Products fail to meet this warranty, then then the owner’s exclusive remedy and the sole obligation of Schluter®-Systems, at its election, shall be to a) repair or replace the failed Products or b) pay an amount not to exceed the original cost of the Products verified to be defective.

DISCLAIMER: THERE ARE NO WARRANTIES BEYOND THIS EXPRESSED WARRANTY AS STATED ABOVE. ALL OTHER WARRANTIES, REPRESENTATIONS OR CONDITIONS, EXPRESSED OR IMPLIED, ARE DISCLAIMED AND EXCLUDED, INCLUDING WARRANTIES, REPRESENTATIONS OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARISING BY STATUTE OR OTHERWISE BY LAW OR FROM A COURSE OF DEALING OR USAGE OF TRADE. SCHLUTER®-SYSTEMS EXCLUDES AND IN NO EVENT SHALL HAVE ANY LIABILITY FOR LOST PROFITS OR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES, ARISING OUT OF OR OTHERWISE CONNECTED TO FAILURE OF THE PRODUCTS, NOR MISUSE OF THE PRODUCTS, REGARDLESS OF ANY STRICT LIABILITY, ACTIVE OR PASSIVE NEGLIGENCE OF SCHLUTER®-SYSTEMS, AND REGARDLESS OF THE LEGAL THEORY (CONTRACT OR TORT OR EXTRA-CONTRACTUAL OR OTHER), NOR FROM ACTS OF WAR, TERRORISM, FIRES, EXPLOSIONS, ACTS OF GOD, INTENTIONAL ACTS OF DESTRUCTION OR ANY LOSSES DUE TO CAUSES UNRELATED TO THE PRODUCT OR DELAYS, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES. THIS WARRANTY IS GIVEN IN LIEU OF ANY OTHER WARRANTY EXPRESSED OR IMPLIED. THE REMEDIES CONTAINED HEREIN ARE THE ONLY REMEDIES AVAILABLE FOR BREACH OF THIS WARRANTY. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, SOME STATES AND PROVINCES DO NOT ALLOW DISCLAIMERS OR OTHER RESTRICTIONS OF IMPLIED WARRANTIES SO SOME OF THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

TRANSFERRABILITY: This Limited Warranty extends ONLY to the original intended owner (defined as original purchaser of the tool – herein after referred to as “Owner”) and is not transferable or assignable, unless otherwise prohibited by specific state or provincial law.

MODIFICATIONS TO WARRANTY: No changes or modification of any terms or conditions of this warranty are allowed unless authorized by written agreement and signed by the Technical Director or an Officer of Schluter®-Systems.

EFFECTIVE DATE: This warranty shall supersede and replace any and all prior oral or written warranties, agreements, or other such representations made by or on behalf of Schluter®-Systems relative to the Products or the use of the Products and shall apply to any purchase occurring on or after January 1, 2013.

CLAIMS ON THIS LIMITED WARRANTY: To make a claim under this Limited Warranty, the owner must provide Schluter®-Systems with written notice within 30 days of any alleged defect in the Products covered by this Limited Warranty, together with date and proof of purchase of the Products, failing which this Limited Warranty shall be of no legal effect. Schluter®-Systems reserves the right at its election and as a condition of this Limited Warranty to inspect the alleged failed and defective condition.

All U.S. Claims shall be sent to: All Canadian Claims shall be sent to:

Schluter Systems L.P. Schluter Systems (Canada), Inc.Attn: Warranty Claims Dept. Attn: Warranty Claims Dept.194 Pleasant Ridge Road 21100 ch. Ste-MariePlattsburgh, NY 12901-5841 Ste-Anne-de-Bellevue, QC H9X 3Y8

*For the purpose of this warranty Schluter Systems, L.P. shall provide the warranty for all products for end users located in the United States, and Schluter Systems (Canada) Inc. shall provide the warranty for all products for end users located in Canada. This warranty is limited to sales of the products made in and intended for use in the United States and Canada.

**Schluter®-Systems Tools (the “Products”): The products are defined to include all Schluter®-Systems tools referred to in the Schluter®-Systems Illustrated Price List.


Warranty Program Summary

All Schluter®-Systems products are covered under our warranty program. Products are warranted for the applicable term from the date of purchase only when the products are used and installed in accordance with the terms and conditions of the applicable Schluter®-Systems technical literature and industry standard guidelines that are not in conflict with the technical literature.

There are three different categories of warranties as follows:

Systems

Systems are application based and include a variety of products that form an integrated system. Systems are defined by installation handbooks.

• Schluter®-DITRA and Schluter®-DITRA-XL uncoupling membranes• Schluter®-DITRA-HEAT electric floor warming system with integrated uncoupling technology• Schluter®-Shower System

Consolidated Products

Consolidated products are products with similar characteristics or functions that are grouped under a single warranty document. These product groups are defined by technical data sheets.

• Floor profiles• Wall and countertop profiles• Stair-nosing profiles• Movement joints and cove-shaped profiles• Balcony profiles and gutters• Schluter®-TROBA and Schluter®-TROBA-PLUS drainage mattings• Schluter®-BEKOTEC modular screed panels• Schluter®-KERDI-DRAIN and Schluter®-KERDI-LINE floor drains• Schluter®-KERDI and Schluter®-KERDI-DS waterproofing membranes

Individual Products

Individual products are those that do not fit into a current consolidated product group and therefore have a separate warranty document. These products are defined by technical data sheets.

• Schluter®-KERDI-BOARD building panels• Schluter®-DITRA-DRAIN thin-bed drainage membrane• Schluter®-KERDI-FIX adhesive/sealant• Tools

For complete warranty information, please see our website: www.schluter.com/warranty.aspx

C O N D I T I O N S O F S A L E

All prior conditions of sale shall be deemed to be modified as hereinafter stated and the following conditions shall be deemed to supersede and control disputes or claims to goods.

1. Ownership of the PropertyOwnership of the products shall remain and vest with Schluter until full payment has been received with respect thereto.

2. DeliveryIf Schluter is prevented from carrying out the provisions hereof by reason of any acts of God, war, revolution, strike, riot, earthquake, delay by carrier, fuel shortage, embargo, lockout or other labour disturbance, the operations of statute of law, interference of civil or military authority or any other event beyond its control, interfering with the production or delivery of the products as herein contemplated, Schluter shall be exonerated from and shall not be liable for any loss or damage arising from any of the foregoing and shall be further excused from making deliveries to the extent of such interference and shall have, in addition to the foregoing and without prejudice thereto, the absolute right to cancel any purchase orders with respect to any of the products therein described or with respect to any part thereof without any liability of any nature whatsoever attaching to itself other than the obligation to reimburse and return any payments of monies made in advance for the products which shall not be delivered for the reasons hereinabove set forth. Any delivery not in dispute shall be paid for regardless of any other existing disputes between Schluter and the Buyer relating to other delivered or undelivered products.

3. Inspection and SampleThe Buyer shall have the right to inspect the products upon delivery of same. Failure by the Buyer to inspect the said products and specify in writing to Schluter any defective products shall constitute on the Buyer’s part an absolute and unconditional waiver of the Buyer’s right to reject the products and shall be deemed an acceptance by the Buyer of the products as to quality and/or quantity of same. Any samples of the products shown to the Buyer prior to placement of any order with Schluter are for the sole purpose and intent of exhibiting to the Buyer the type of products which may be the subject matter of an order by the Buyer. Such samples create no warranty on the part of Schluter, implied or otherwise, that the said products ultimately forming the subject matter of an order placed by the Buyer necessarily shall conform with the samples referred to above.

4. ClaimsAny claim for damage, short shipment, misdelivery or defects of the products must be specified in writing on the delivery slip and brought to the attention of Schluter at the time of delivery. If no claim is made by the Buyer at the time of receipt of the products, then the right to make such claim or the right to reject any or all of the products shall be waived by the Buyer. At its option, Schluter will either replace such products that are proven defective or allow credit for them.

5. InstallationSchluter shall in no way be responsible for any claims resulting from the installation or finishing of the products.

6. LiabilitySchluter is not liable and/or responsible toward any third party and/or Buyer, as the case may be, for any damage and/or loss of any nature or kind howsoever arising, resulting directly or indirectly from the use of the products in a manner not in conformity with the instructions accompanying same and in effect with respect thereto and/or resulting from the products being improperly used for which the products were not intended. Prior to any use of products, the user and/or Buyer has the prior obligation to verify the suitability of the products for their intended use and the Buyer shall assume all risks and responsibility with respect thereto.

Schluter’s responsibility and liability with respect to defective products and/or work attaching thereto shall be confined solely to the replacement and/or repair of same. In addition to the foregoing, Schluter shall alternatively have the right to reimburse the Buyer the purchase price paid with respect thereto rather than to replace and/or repair the defective products.

7. AcceptanceInstallation and/or use of the products by the Buyer shall constitute an irrevocable acceptance of the products. Failure to reject the products in the manner and within the time period stipulated in paragraphs 4 and 5 hereof shall be deemed to constitute an acceptance of the products.

8. CancellationOrders are not subject to cancellation or deferment of shipment unless Schluter is indemnified against the loss resulting therefrom. Schluter shall not be responsible for delays or non-performance caused by strikes, fires or other causes beyond its control, as the whole is stipulated in paragraph 3 hereof. Orders entered on Schluter’s order book cannot be cancelled or changed without Schluter’s prior written consent and then only on the terms which will indemnify Schluter against all loss. No cancellations will be accepted or allowed after the order has been shipped from our warehouse.

10. Modifications of ConditionsNo modifications of the conditions can be made without the prior written authorization from a representative of Schluter.

5536

50

07

/201

5©

201

5 S

chlu

ter

Sys

tem

s L.

P.

Schluter Systems L.P. • 194 Pleasant Ridge Road, Plattsburgh, NY 12901-5841 • Tel.: 800-267-1923• Fax: 800-477-9783

[email protected]

www.schluter.com

Floor & Decor Special Order Catalog

Installation Systems for Ceramic & Stone Tile

Effective July 1, 2015

Installation Systems for Ceramic & Stone Tile · PDF fileInstallation Systems for Ceramic &...

Documents

Transcript of Installation Systems for Ceramic & Stone Tile · PDF fileInstallation Systems for Ceramic &...