Installation of PNMT Paso Neo

Submission ProhibitedNEC Internal Use Only

Installation of USB ROI-S05752

-94-

10. Installation of USB

Following procedure explains how to install the USB modem driver to awindows XP PC.

1. Connect the PC with a USB cable between the LCT port and theUSB port,

2. Select “Install from a list or specific location [Advanced]” andClick on the “Next” button,


ROI-S05752 Installation of USB

-95-

3. Insert the CD-ROM of the USB driver to the PC and select“Search for the best driver in these locations” and check “Searchremoval media [floppy, CD-ROM...],” then, Click on the “Next”button,

4. Click “Continue Anyway” button in the Hardware Installationalert pop-up,

5. USB driver installation will be started,


Installation of USB ROI-S05752

-96-

6. Click “Finish” button in the “Found New Hardware Wizard” afterinstallation has been completed.


ROI-S05752 Dial-up Setting

-97-

11. Dial-up Setting

Following procedure explains when the Dial-up is set to the PC onWindows Xp.

1. Click on “Start”→“Setting”→“Control Panel” and on “NetworkConnections” icon to start the Dialup setting.

2. The “Network Connections” window appears. Click on the“Create a new connection” in the Network Tasks category.


Dial-up Setting ROI-S05752

-98-

3. The “Welcome to the New Connection Wizard” windowappears. Click on the “Next” button to continue.

4. Select “Connect to the network at my workplace” and Click onthe “Next” button to continue.



-99-

5. Select option “Dial-up connection” and Click on the “Next”button to continue.

6. On the “New Connection Wizard” window, enter “LCT” in the“Company Name” entry field and Click on the “Next” button tocontinue.



-100-

7. Enter phone number in the “Phone number” entry field and Clickon the “Next” button to continue.

8. Verify that the connection “LCT” has displayed as the connectionregistered. You can also create a shortcut on your desktop if youneed. Click on the “Finish” button.



-101-

9. On “Connect LCT” dialog, click “Properties”,

10. Verify that “Modem-USB Modem Driver [COM(#)]” isdisplayed on the General dialog box connect using check box, andselect “Show icon in notification area when connected” in theLCT Properties dialog. Then, Click on the “Configure” button.



-102-

11. On “Modem Configuration” dialog, check that unchecked allfive boxes, then Click on the “OK” button,

12. Retain the default setting on the “Options” tab, click the“Security” tab.



-103-

13. Retain the default setting on the “Security” tab, click the“Networking” tab.

14. On the Networking tab, verify that PPP... is displayed in the “Typeof dial-up server I am calling” setting field, unchecked “File andPrinter... and Client for Microsoft....”, “Client for MicrosoftNetworks”.



-104-

15. Click “Settings” button, unchecked all the boxes in the “PPPSettings” dialog as shown below. Click “OK” to go back to theprevious window. Point “Internet Protocol (TCP/IP)” and thenclick “Properties”.

16. Verify that both “Obtain an IP address automatically” and“Obtain DNS server address automatically” are selected.

17. Click on the “Advanced” button,



-105-

18. In the “Advanced TCP/IP Settings” dialog, mark check box of“Use default gateway on remote network” and for the PPP linkis unchecked, then Click “OK”.

19. Retain the default setting on the “Advanced” tab and click “OK”.


Java Runtime Install ROI-S05752

-106-106 pages

12. Java Runtime Install

1. Install Java Runtime by double-click on the file name (highlightedbelow).

Installation of PNMT Paso Neo

Documents

Transcript of Installation of PNMT Paso Neo