Installation Instructions Rear Frame Cover - Smittybilt · 2013. 5. 2. · Rear Frame Cover (Part#...

1
WWW.SMITTYBILT.COM For Technical Support/Warranty Information please call 310-762-9944 Smittybilt, 400 West Artesia Blvd, Compton, CA 90220 Installation Instructions Rear Frame Cover (Part# JB48CRT) 2007-2009 Wrangler PARTS LIST 2 Fill plates 2 10MM X 25MM bolts 2 10MM X 25MM lock nuts 4 10MM washers 1. REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY. 2. Locate, remove and set aside the individual plates. 3. Remove the top bolt from each side of the bumper mount and set them aside. 4. Set one of the plates over its location (Fig 1) 5. Start the bolt in the removable bracket. The removable bracket can be loosened and moved over to align with the fill plate bracket. (Fig 2) 6. Start the bolt in the bumper mount (Fig 3) 7. Repeat the operations on the other side of the vehicle 8. Level and adjust the plates before tightening the fasteners. Leave a gap of about 1/8-inch around the plates. (Fig 1) Fig 1 Gap Fig 3 Fig 2

Transcript of Installation Instructions Rear Frame Cover - Smittybilt · 2013. 5. 2. · Rear Frame Cover (Part#...

  • WWW.SMITTYBILT.COM

    For Technical Support/Warranty Information please call 310-762-9944

    Smittybilt, 400 West Artesia Blvd, Compton, CA 90220

    Installation Instructions Rear Frame Cover

    (Part# JB48CRT) 2007-2009 Wrangler

    PARTS LIST 2 Fill plates 2 10MM X 25MM bolts 2 10MM X 25MM lock nuts 4 10MM washers

    1. REMOVE CONTENTS FROM BOX AND CHECK FOR DAMAGE. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY.

    2. Locate, remove and set aside the individual plates. 3. Remove the top bolt from each side of the bumper mount and set them aside. 4. Set one of the plates over its location (Fig 1) 5. Start the bolt in the removable bracket. The removable bracket can be loosened and moved

    over to align with the fill plate bracket. (Fig 2) 6. Start the bolt in the bumper mount (Fig 3) 7. Repeat the operations on the other side of the vehicle 8. Level and adjust the plates before tightening the fasteners. Leave a gap of about 1/8-inch

    around the plates. (Fig 1)

    Fig 1

    Gap

    Fig 3

    Fig2


REAR PROJECTION VIDEO WALLS - miland.co.id · rear projection video wall displays. ... Both are assembled into the metal frame without staples, stitches, clamps or other visible items

REAR PROJECTION VIDEO WALLS - miland.co.id · rear projection video wall displays. ... Both are assembled into the metal frame without staples, stitches, clamps or other visible items

READ THIS FIRST · 101 p04866101 square frame rear (g0486) 126 p04866126 aluminum plate 101 p04876101 square frame rear (g0487) 127 ps02m phlp hd scr m4-.7 x 12 101-1 p04866101-1

READ THIS FIRST · 101 p04866101 square frame rear (g0486) 126 p04866126 aluminum plate 101 p04876101 square frame rear (g0487) 127 ps02m phlp hd scr m4-.7 x 12 101-1 p04866101-1

Round fastener wallet - HORANE×2 ×2 ×2 © HORANE Inc. 10mm × 10mm

Round fastener wallet - HORANE×2 ×2 ×2 © HORANE Inc. 10mm × 10mm

new-1 · REAR FENDER B Remove the following: Rear wheel (page 16-5) Battery (page 19-5) Rear fender A (page 2-8) Rear cowl (page 2-7) FRAME/BODY PANELS/EXHAUST SYSTEM

new-1 · REAR FENDER B Remove the following: Rear wheel (page 16-5) Battery (page 19-5) Rear fender A (page 2-8) Rear cowl (page 2-7) FRAME/BODY PANELS/EXHAUST SYSTEM

Rear Flip Seat Kit & Frame Only Kit Installation ...

Rear Flip Seat Kit & Frame Only Kit Installation ...

(50Hz) DUCT type - c-o-k.ru · CONDITIONER (50Hz) DUCT type CONTENTS ... add dimension h to service space for dimensions L1 and L2. 10mm or more 10mm or more 10mm or more 10mm or

(50Hz) DUCT type - c-o-k.ru · CONDITIONER (50Hz) DUCT type CONTENTS ... add dimension h to service space for dimensions L1 and L2. 10mm or more 10mm or more 10mm or more 10mm or

10mm Brochure

10mm Brochure

Model No. NTC07942 USER'S MANUAL...6 2. While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (16) to the Frame with four M8 x 40mm Button Screws (54) and

Model No. NTC07942 USER'S MANUAL...6 2. While another person lifts the rear of the Frame (1), attach the Rear Stabilizer (16) to the Frame with four M8 x 40mm Button Screws (54) and

RT Rear Suspension Leaf Spring Frame Hangers · RT™/RTE™ Rear Suspension Leaf Spring Hangers 2 45745-038 Introduction This RT/RTE Frame Hanger Selection Guide is intended to aid

RT Rear Suspension Leaf Spring Frame Hangers · RT™/RTE™ Rear Suspension Leaf Spring Hangers 2 45745-038 Introduction This RT/RTE Frame Hanger Selection Guide is intended to aid

Recumbent Trike Assembly Instruction M-010 And M-010F...Recumbent Trike Assembly Instruction M-010 And M-010F Page 1/15 Check all the parts Main frame (cross frame) Main frame (rear

Recumbent Trike Assembly Instruction M-010 And M-010F...Recumbent Trike Assembly Instruction M-010 And M-010F Page 1/15 Check all the parts Main frame (cross frame) Main frame (rear

10mm Frog Tadpole

10mm Frog Tadpole

Detroit Speed, Inc. QUADRA Link Rear Suspension 1964.5 ... · location of the axle on the rear frame rails and trunk floor. ... Do each frame rail modification one side at a time

Detroit Speed, Inc. QUADRA Link Rear Suspension 1964.5 ... · location of the axle on the rear frame rails and trunk floor. ... Do each frame rail modification one side at a time

COMMERCIAL VEHICLE FRAME DESIGN - … · COMMERCIAL VEHICLE FRAME DESIGN: ... while the rear section at the rear axle or bogie is ... than 3 per cent of the total axle weight. FAILURE

COMMERCIAL VEHICLE FRAME DESIGN - … · COMMERCIAL VEHICLE FRAME DESIGN: ... while the rear section at the rear axle or bogie is ... than 3 per cent of the total axle weight. FAILURE

Emirates Auction...REPAIRED/LEFT SIDE FRAME JOINT OPEN/OUTER DENT 53208 MILES REAR VIEW MIRROR,SUNVISOR NONE INTERIOR PORTION DAMAGE SAJJNWDW4NP184537 VIN ON FRAME * …

Emirates Auction...REPAIRED/LEFT SIDE FRAME JOINT OPEN/OUTER DENT 53208 MILES REAR VIEW MIRROR,SUNVISOR NONE INTERIOR PORTION DAMAGE SAJJNWDW4NP184537 VIN ON FRAME * …

Installation & Maintenance Manual Downloads/Multi Strand... · The conveyor frame and equipment are extruded aluminum shapes with 10mm t-slots for modular bolt together construction.

Installation & Maintenance Manual Downloads/Multi Strand... · The conveyor frame and equipment are extruded aluminum shapes with 10mm t-slots for modular bolt together construction.

|0330.292. 800 · above require aluminum inside wheels. 295/75 R 22.5 are preferred. *Rear frame height should equal rear tire height. *Air-bag rear suspension is recommended for

|0330.292. 800 · above require aluminum inside wheels. 295/75 R 22.5 are preferred. *Rear frame height should equal rear tire height. *Air-bag rear suspension is recommended for

Optimisation of Low Cycle Fatigue Life in Turbine Rear Frame

Optimisation of Low Cycle Fatigue Life in Turbine Rear Frame

Modular Three-Section Frame System · (Full-length frame rail option) 1 1970-81 Camaro Frame System g-Machine Front Subframe, Frame Connector and g-Bar Rear Suspension System for

Modular Three-Section Frame System · (Full-length frame rail option) 1 1970-81 Camaro Frame System g-Machine Front Subframe, Frame Connector and g-Bar Rear Suspension System for

Rear Blades - Land Pride...35464 6 RB3772, RB3784 & RB3796 Rear Blades 301-457P 07/09/18 Land Pride Table of Contents Part Number Index Section 2: Frame Frame & Hitch Applies to RB3772,

Rear Blades - Land Pride...35464 6 RB3772, RB3784 & RB3796 Rear Blades 301-457P 07/09/18 Land Pride Table of Contents Part Number Index Section 2: Frame Frame & Hitch Applies to RB3772,

Tiny - Power Farming · Tiny 290L Specifications TY Y Y Y Y Y Y Y YL60 Disc Size 32” x 3/8“ (810mm x 10mm) front 32” x 5/16“ (810mm x 8mm) rear - optional 8” mm discs rear

Tiny - Power Farming · Tiny 290L Specifications TY Y Y Y Y Y Y Y YL60 Disc Size 32” x 3/8“ (810mm x 10mm) front 32” x 5/16“ (810mm x 8mm) rear - optional 8” mm discs rear