MACTek(R) VIATOR(R) HART(R) Interface Installation Instructions

(c) Copyright MACTek Corporation, 2002-2010. All rights reserved.

Revision 3.1 Release Date July 2010

VIATORCheckBT.exe Revision 3.1.3861VSPCF.exe Revision 3.1.3861

This file contains supplemental installation information for the following VIATOR HART Interfaces:

- MACTek VIATOR USB HART Interface- MACTek VIATOR PCMCIA HART Interface- MACTek VIATOR RS232IS HART Interface- MACTek VIATOR RS232 HART Interface- MACTek VIATOR BT HART Interface

All documentation, utilities, and drivers (if required) can be accessed directly from the CD, or copied to your hard drive by the installer.

Contents:

- INSTALLATION- CD LAYOUT- CUSTOMER SUPPORT

INSTALLATION:

- If the CD does not autorun, launch "setup.exe".

- You will be prompted for your interface type.

- Select any additional hardware documentation you may want.

- Drivers will be installed for plug-n-play modems elected.

- If a plug n play interface is connected before the software installation, setup will update the drivers (if older).

- If an error is displayed when installing VIATORCheckBT(TM) that has a window called Just-In-Time Debugging with the error message "An exception 'System.IO.FileLoadException' has occurred in DefaultDomain" the .NET framework is not installed. Please install the .NET framework 2.0 from the Microsoft Update service or Microsoft's website. If you do not have internet service there is an installation file on the MACTek VIATORCheckBT CD under Extras. Updates for the .NET framework are not included on the CD.

- If using the USB VIATOR Modem and this is a new install please plug the USB Modem in before installing the software. If there are any problems in getting the device to be recognized after installing VIATORCheckBT(R) and it asks for a driver disk then indicate the driver is located in the installation

directory (default is C:Files\VIATOR files from MACTek) under MACTek USB Driver or on the CD under \USB Driver.

- The MACTek PCMCIA VIATOR Modem driver is not supported in this installation.

- There are several additional packages that are provided with VIATORCheckBT on the CD. The following packages may be found under the folder Extras: Adobe Reader v8.11 - used to view the manual and other documents. Microsoft .NET 2.0 - needed for VIATORCheckBT.

A HARTCommDTM package can be found at the top level of the CD: HARTCommDTM folder - HARTCommDTM v1.2 from CodeWrights - used with FDT

frame applications such as PACTware that require a communications DTM.

Install these packages by going to the Extras folder on the CD and double clicking the executable file associated with that package name. The HARTCommDTM can be installed by running setup.exe in the HARTCommDTM folder at the top level of the CD. Follow the instructions found on the installation software screens to complete the installation. For additional information or to check for the latest version of the HARTCommDTM visit www.codewrights.biz/products/HARTCommDTM <http://www.codewrights.biz/products/HARTCommDTM>. A newer version of all these software packages may be available on the internet. Check www.adobe.com <http://www.adobe.com> for Adobe Reader software, www.microsoft.com <http://www.microsoft.com> for the .NET 2.0 Framework and the MACTek website www.MACTekcorp.com <http://www.mactekcorp.com> for the CodeWrights CommDTM software or VIATORCheckBT.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Windows Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.

MACTek and VIATOR are registered trademarks of the MACTek Corporation.VIATORCheckBT is a trademark of the MACTek Corporation.

HART is a registered trademark of the HART Communication Foundation.

The Bluetooth word mark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.

CD LAYOUT:

- The CD ROOT directory contains the installer files and driver files for plug n play interfaces.

- \Extras Contains several optional installation packages.

- \USB Driver Contains the USB driver files if necessary to install manually.

- \GPL Contains source code for com0com that is used with VSPCF.

- \HARTCommDTM Contains a HARTCommDTM v1.2 from CodeWrights used with FDT Frame Apps.

CUSTOMER SUPPORT:

Please contact us for technical assistance, troubleshooting, product recommendations or application questions.

- Online: http://www.mactekcorp.com/support.html

- Phone: (330) 487-5477 Monday-Friday 9:00am - 4:00pm EST__________________________________________________________________

VIATORCheckBT contains a modified free software application com0com

Copyright (c) 2006-2008 Vyacheslav Frolov

This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA