Installation Instructions for Drywall Flange Kit
Transcript of Installation Instructions for Drywall Flange Kit
DuoT1 Installation Instructions for Drywall Flange Kit
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING.RISK OF FIRE AND ELECTRICAL SHOCK. FIXTURE MUST BE INSTALLEDBY A QUALIFIED ELECTRICIAN. ALL INSTALLS SHOULD BE IN ACCORDANCE WITH NATIONAL, LOCAL BUILDING AND ELECTIRCALCODES. ALL WIRES AND MATERIALS USED FOR INPUT/OUTPUTMUST BE UL APPROVED.
Opening DimensionsProduct Opening Length (X) Opening Width (Y)
DuoT1-2FADuoT1-4FADuoT1-6FADuoT1-8FA
25”49”73”97”
6.9”6.9”6.9”6.9”
Installation Steps
Designed and Manufactured in the USAwww.aronlighting.com
Page 1
1 Cut hole in ceiling according to measurements in table.
2 Insert Flange Kit into ceiling, fasten kit to wooden frameor hang kit using hanging wires. Ensure tight �t against ceiling.
3 Attach BX cable to access plate and connect wires.Fasten access plate back on to driver box.
4 Insert �xture into opening in �ange kit.
X
Y