Installation Guide DualShield Radius Server - Deepnet Security · 2013-10-24 · Installation Guide...
Transcript of Installation Guide DualShield Radius Server - Deepnet Security · 2013-10-24 · Installation Guide...
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 1
DualShield Radius Server Installation Guide
(Version 5.7)
Copyright 2013
Deepnet Security Limited
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 2
Trademarks
Deepnet Unified Authentication, MobileID, QuickID, PocketID, SafeID, GridID, FlashID,
SmartID, TypeSense, VoiceSense, DevicePass, RemotePass and Site Stamp are
trademarks of Deepnet Security Limited. All other brand names and product names are
trademarks or registered trademarks of their respective owners.
Copyrights
Under the international copyright law, neither the Deepnet Security software or
documentation may be copied, reproduced, translated or reduced to any electronic
medium or machine readable form, in whole or in part, without the prior written consent
of Deepnet Security.
Licence Conditions
Please read your licence agreement with Deepnet carefully and make sure you
understand the exact terms of usage. In particular, for which projects, on which
platforms and at which sites, you are allowed to use the product. You are not allowed to
make any modifications to the product. If you feel the need for any modifications, please
contact Deepnet Security.
Disclaimer
This document is provided “as is” without warranty of any kind, either expressed or
implied, including, but not limited to, the implied warranties of merchantability, fitness
for a particular purpose, or non-infringement.
This document could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new
editions of the document. Deepnet Security may make improvements of and/or changes
to the product described in this document at any time.
Contact
If you wish to obtain further information on this product or any other Deepnet Security
products, you are always welcome to contact us.
Deepnet Security Limited
Building 3
North London Business Park
Oakleigh Road South
London N11 1GN
United Kingdom
Tel: +44(0)20 3668 1580
Fax: +44(0)20 8446 3182
Web: www.deepnetsecurity.com
Email: [email protected]
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 3
Contents
Prerequisites......................................................................................................... 4
Preparation .......................................................................................................... 5
Installation ........................................................................................................... 6
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 4
Prerequisites
Before you run the setup wizard, make sure that the computer meets the following minimum hardware and software requirements: Hardware: Pentium 4 Compatible CPU, 1GB RAM and 5GB free hard disk space Software: Windows 2003 /2008/2012 Server, 32-bits or 64-bits
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 5
Preparation
To the DualShield Authentication Server, DualShield Radius Server is an authentication
agent. For an authentication agent to be able to connect to the authentication server,
the agent must be registered in your authentication server.
For security purpose, the agent registration function is disabled by default. You need to
enable the Agent Auto Registration function in your DualShield authentication server.
You need to enable the Agent Auto Registration function in your DualShield server. In
the DualShield Management Console, select “Authentication | Agents” and press the
“Auto Registration” button on the toolbar:
You may want to enable the “Check IP” option for extra security. If this option is enabled,
then in the “IP Address” field you must enter the IP address of the machine where the
RADIUS server is being installed.
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 6
Installation
To install the DualShield Radius Server, launch the installer DualRadiusSetup.exe and go
through the following steps:
Step 1: Welcome
Step 2: Licensing Agreement
Step 3: Installation Path
Step 4: Server Selection
Step 5: Select Installation Packages
Step 6: Server Configuration
Step 7: Agent Registration
Step 8: Configuration Summary
Step 9: Installing
Step 10: Perform External Processes
Step 11: Installation Completed
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 7
Step 1: Welcome
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 8
Step 2: Licensing Agreements
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 9
Step3: Installation Path
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 10
Step 4: Server Selection
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 11
Step 5: Select Installation Packages
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 12
Step 6: Server Configuration
Administration Port:
The Administration port is the port accessed by the DualShield Authentication Server for
the purpose of managing the DualShield Radius Server .
Authentication Port:
The Authentication Port is the standard Radius authentication port.
Accounting Port:
The Accounting Port is the standard Radius accounting port.
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 13
Step 7: Agent Registration
Change the Registration URL to the URL of your DualShield server. Please note that the
protocol of the connection to the DualShield server must be set to HTTPS. The default
port of DualShield server is 8071.
Step 8: Configuration Summary
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 14
Step 9: Installing
Installation Guide DualShield Radius Server
Copyright © 2013, Deepnet Security. All Rights Reserved. Page 15
Step 10: Perform External Processes