INSTALL GUIDE Ferrari 348 Supersport X-Pipe Exhaust System · 2018. 8. 10. · 1 INSTALL GUIDE...
Transcript of INSTALL GUIDE Ferrari 348 Supersport X-Pipe Exhaust System · 2018. 8. 10. · 1 INSTALL GUIDE...
-
1
INSTALL GUIDE
Ferrari 348 Supersport X-Pipe Exhaust System
Difficulty
Specialty Tools Required
Hammer
Punch
Vise
CAUTION
• Always allow car to cool before performing any installation(s) or service(s) on it. • Always disconnect negative battery terminal before beginning service. • Always be sure to work on an even and level surface when raising vehicle(s) with a jack, and support all raised vehicles with locked
jack stands once elevated. • Fabspeed Motorsport recommends that all installations be supervised or verified by a trained professional technician. • Fabspeed Motorsport is not responsible for any personal injury or damage(s) sustained to a vehicle during installation of
aftermarket performance parts.
-
2
Remove factory exhaust support bracket assembly.
Detach factory hangers from crossmember by removing two
bolts each. This portion of the hanger will later be affixed to
new Fabspeed exhaust.
-
3
Using a punch, hammer, and vise drive studs out of
exhaust hanger assembly. This section of the hanger
will now bolt in location of factory exhaust support
bracket at left and right frame rail.
-
4
If you have any questions, comments, or concerns related to your product, please contact us!