Insta cert soil waste system pp
description
Transcript of Insta cert soil waste system pp
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4010-03
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastic piping systems for soil and waste discharge within the building structure according to annex 1. Approved raw materials and sealings according to annex 2 (confidential). Inspection of production place: VTT/RTE4827/05
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Nastola, Finland
SBC 1451
EN 1451-1
2005-06-20
Annex 1 Sivu 1 (1) Licence of certification No. 4010-03 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Fittings: Trade name Fitting group Application area/Pipe series Dimensions - size group 1 Application area/Pipe series Dimensions - size group 2 Fitting group Application area/Pipe series Dimensions - size group 1 Application area/Pipe series Dimensions - size group 2 Fitting group Application area/Pipe series Dimensions - size group 1 Application area/Pipe series Dimensions - size group 2 Designation of production place Pipes: Application area Pipe series Dimensions, mm - size group 1
UPONOR HTP Bends B/S16 32 – 50 BD/S16 75 – 160 Branches B/S16 32 – 50 BD/S16 75 – 160 Other fittings B/S16 32 – 50 BD/S16 75 – 160 1 B S16 32 - 50
Test reports and other basic documents: Type approval YM74/6221/2004 Nemko certificate 1021 VTT-S-07146-06
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4032-03
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) according to annex 1. Approved raw materials and sealings according to annex 2 (confidential).
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Kausala, Finland
SBC 1451
EN 1451-1
2005-11-08
Annex 1 Sivu 1 (1) Licence of certification No. 4032-03 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
PIPES: Pipe type Pipe series Application area Dimensions, mm - size group 1 FITTINGS: Trade name Fitting group Pipe series Application area/ Dimensions, mm - size group 2 Fitting group Pipe series Application area Dimensions, mm - size group 2 Designation of production place
socket pipe, white S16 B 32 – 50 UPONOR HTP Bends S16 BD 75 – 160 Other S16 BD 75 – 160 B1
TEST REPORTS AND OTHER GROUNDS FOR LICENCE: SP F813915C SP F813915A INSTA-CERT licence 4010-01 VTT/RTE3275/05 VTT/RTE3022/05 VTT/RTE3360/05 VTT/RTE2738/03
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4048-04
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene with mineral modifiers (PP-MD) according to Annex 1. Approved recipes and fittings according to Annex 2 (confidential).
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Nastola, Finland
SBC PS 102
NPG/PS 102
2009-04-14
Annex 1 Sivu 1 (1) Licence of certification No. 4048-04 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Trade name Material Pipe series Application area Ring stiffness - Dimensions, mm (size group 1) Application area Ring stiffness - Dimensions, mm (size group 2) Application area Ring stiffness - Dimensions, mm (size group 2)
UPONOR plastics piping system for soil and waste discharge within the building structure PP S16 B SN 4 32 - 50 BD SN 4 75 BD SN 8 110
Type approvals: STF VTT 11363/06, SITAC 0855/97, NPS 0386, VA 2.14/15914 VTT/RTE2737/03, VTT/RTE2864/04, VTT-S-07146-06, VTT/RTE3360/05, VTT-S-10865-06, SP FX120221B SP FX120219B
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4049-01
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene with mineral modifiers (PP-MD) according to Annex 1. Approved recipes and fittings according to Annex 2 (confidential).
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Fristad, Sweden
SBC PS 102
NPG/PS 102
Annex 1 Sivu 1 (1) Licence of certification No. 4049-01 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Trade name UPONOR plastics piping system
for soil and waste discharge within the building structure
Type approvals:
Material Pipe series
PP S16
STF VTT 11363/06, SITAC 0855/97, NPS 0386 INSTA-CERT licence 4047
Application area BD
Ring stiffness SN 8
- Dimensions, mm (size group 2)
110
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to defective or faulty products.
The licence is valid for one calendar year and is automatically renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version number only if the content and/or conditions of the licence have been changed. The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY Anne Qvintus, Managing Director
2013-07-01 4064-04
Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene with mineral modifiers (PP-MD) according to Annex 1. Approved recipes and fittings according to Annex 2 (confidential).
Jaana Hallikas + 358 20 129 211 + 358 20 129 210
Plastic pipes
Kausala, Finland
SBC PS 102
NPG/PS 102
2008-10-29
Annex 1 Sivu 1 (1) Licence of certification No. 4064-04 Date 2013-07-01
Licensee Uponor Infra Oy P.O. Box 21 FI-15561 NASTOLA
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure – Polypropylene with mineral modifiers (PP-MD)
Trade name Product type Pipe series Ring stiffness Application area Dimensions, mm - size group 1 Ring stiffness Application area Dimensions, mm - size group 2 Designation of production place
UPONOR PP-MD Socket pipe S16 SN4 B 32 - 50 SN4 BD 75 - 160 B1
TEST REPORTS AND OTHER BASIS FOR LICENCE: INSTA-CERT licence 4048-02 SP F813915A, SP F813915B SP FX120221B SP FX206017B