Insta cert 4017 uponor pressure system pe for water and for drainage and sewer supply
description
Transcript of Insta cert 4017 uponor pressure system pe for water and for drainage and sewer supply
LICENCE OF CERTIFICATION
Date: No./Version:
First version granted:
Licensee’s name and address Marks covered by licence:
Information regarding licensee/manufacturer
Licensee’s technical officer
Telephone
Telefax
Manufacturer
Place of manufacture
Product covered by the licence
Type of product
Standard/Other normative document
Specific rules
Specification of product
The licensee above is hereby given permission to use the
INSTA-CERT mark on or in connection with products, which fulfil the requirements of the standard or the normative document specified above (what is said in this document about INSTA-
CERT mark will also be valid for marks defined in relevant SBC). The certification licence is valid on the condition that the licensee complies with the ”General rules for certification by
partners of INSTA-CERT” (GRC) and the specific rules applying to certification of products of the type mentioned. The licensee is obliged to indemnify INSTA-CERT of any claim for damages or
any other expenses to which partners of INSTA-CERT may become liable as a result of injuries caused by a product manufactured or sold by the licensee. This also applies to
defective or faulty products.
The licence is valid for one calendar year and is automatically
renewed for one year at a time, unless the licensee or member of INSTA-CERT gives at least three months’ notice to the contrary. The licence will be re-issued with an amended date and version
number only if the content and/or conditions of the licence have been changed.
The licence is not transferable.
MEMBER OF INSTA-CERT: INSPECTA SERTIFIOINTI OY
Tomi Kasurinen, Managing Director
2013-12-17 4017-12
Uponor Infra Oy P.O. Box 21 FI-65101 VAASA
PE pressure pipes for water and for drainage and sewer supply according to Annex 1. Approved raw materials according to Annex 2 (confidential). Inspection of place of manufacture: VTT/RTE1327/05
Jan-Åke Sund
Plastic pipes
Vaasa, Finland
SBC 12201
EN 12201-1
1999-11-23
Annex 1 Sivu 1 (1) Licence of certification No. 4017-12 Date 2013-12-17
Licensee Uponor Infra Oy P.O. Box 21 FI-65101 VAASA
PIPES: Trade name Colour PE designation Standard dimension ratio Dimensions, mm - size groups 1 – 3 Standard dimension ratio Dimensions, mm - size groups 1 – 3 Standard dimension ratio Dimensions, mm - size groups 1 – 4 Standard dimension ratio Dimensions, mm - size groups 1 – 4 Standard dimension ratio Dimensions, mm - size groups 1 – 4 Trade name Colour PE designation Standard dimension ratio Dimensions, mm - size groups 1 – 3 Standard dimension ratio Dimensions, mm - size groups 1 – 4 Standard dimension ratio Dimensions, mm - size groups 2, 3 and 4 Designation of production place
Uponor pressure pipes PE 80 black, blue and black with blue or brown stripes PE 80 SDR 9 16 – 500 SDR 11 20 – 630 SDR 13,6 25 – 800 SDR 17 32 – 1000 SDR 26 50 – 1200 Uponor pressure pipes PE 100 black, blue and black with blue or brown stripes PE 100 SDR 11 16 – 630 SDR 17 16 – 1000 SDR 26 75 – 1600 (6)
Test reports and other basis for licence: VTT/RAT2860, VTT/RAT9407, VTT/RAT9408, VTT/RAT9409 VTT/RAT9502, VTT/RAT3788 VTT/ELI91062, VTT/ELI5, VTT/ELI4441, VTT/RTE56186/95, VTT/ELI1152/91, VTT-S-06509-09 VTT/BEL639/95, VTT/RTE52583/96, VTT/BEL629/96, VTT/ELI0506, VTT/RTE53514/97 VTT/RTE52584/97, VTT/RTE50114/98, VTT/RTE3740/00, VTT/BEL556/2000, VTT/BEL736/2000 VTT/RTE2498/02, VTT/RTE49/99, VTT/BEL554/99, VTT/RTE50133/98 VTT/BEL193/99, VTT/RTE50126/98, VTT/BEL655/98, VTT/RTE52584/97, VTT/RTE2449/04 VTT/RTE3698/04, VTT/RTE3565/04, VTT-S-07329-6 VTT-S-2757-06, VTT-S-01682, Bodycote/P-03/180, Bodycote/P-04/40, Bodycote/P-03/176, VTT-S-02611-09, VTT/RTE4117/04 VTT-S-08579-13