Inspiration Plus Lectern - assets.techedu.com€¦ · Color Options See spectrumfurniture.com for...
Transcript of Inspiration Plus Lectern - assets.techedu.com€¦ · Color Options See spectrumfurniture.com for...
Color OptionsSee spectrumfurniture.com for complete color options and combinations.
Page 1 of 19revised 11/30/16
Inspiration Plus Lectern™
Technical Specifications 55411
Use the Inspiration Plus Lectern where a small-footprint lectern with rack rail for equipment storage is required. The Inspiration Plus Lectern is available in two heights; 36 inch and 42 inch. The 36-inch lectern has 15 rack units available and the 42-inch lectern has 19 rack units. On the audience side is a lockable door that can have an optional custom-cut logo. An optional locking presenter side door is available. The lectern can have either a toe kick or five-inch balloon casters installed for stationary or mobile use. The worksurface is 24-inches wide and 28-inches deep. The worksurface has a surround, two covered wiring holes, and two mounting holes for optional monitor arm installation on the left or right. An optional Overbridge Control Console can be added to the worksurface for additional control access. Up to two optional flip-up shelves can be added to increase the worksurface size. An optional keyboard tray is available. Other options available include a side table that can be mounted to the left or the right side of the lectern, audience side rack rail to double the rack units, and rack-mount accessories (shelves, drawers, cooling fans, and others).
Features and Benefits• Available in 36” or 42” heights for optimal viewing level • Durable powder coated steel chassis provides a long-lasting finish• Scratch and impact-resistant high-pressure laminate top provides a durable,
useful worksurface for instructors• Four inboard 5” locking balloon wheel plate casters with metal
construction and non-marring rubber provide the easiest-rolling, and quietest transport in the industry (rated for 325 lb each) (BW / SR)
• Toe kick (TK) version available when mobility is not necessary or desired• Standard locking audience-side door provides easy-access to equip-
ment (can be flipped to be hinged from the left or right) • Standard worksurface surround provides privacy and styling• Blank overbridge console version allows custom cutouts and
installation of presentation controllers• Two 2” cable grommets (left and right) on the worksurface or overbridge
provide cable access• Instructor-side rack-rail equipment mounting (42”H - 19RU, 36”H - 15RU)• Locking audience side door provides security and easy-access
• Ventilated side panels help keep equipment cool• Cable grommets keep wires and cords organized• Can be used in a seated or standing position • Worksurface and base panel vinyl edging protects walls and furniture• Lectern ships fully-assembled for quick, simple integration and deployment• Optional keyboard tray can be installed under worksurface• Optional flip-up document camera / task shelf provides a convenient
additional worksurface• Optional locking instructor-side door provides security• Optional 15RU rear rack rail provides additional rack units if necessary• Optional ADA-compliant side table provides additional presentation space• Warranted to be free of all defects in materials and workmanship for 10 years• Designed and assembled in Chippewa Falls, WI, USA
Page 2 of 19revised 11/30/16
Construction• The worksurface, base panel, and surround is constructed from 1” thick NAF (no-added formaldehyde) composite
board with .030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face• Metal components consist of 16-gauge steel• Worksurface edges are covered with 3mm vinyl• All metal components are finished with a scratch-resistant powder coat epoxy• Each Inspiration Plus Lectern is factory-assembled with casters or toe kick, packaged, and shipped on its own skid
Seated position(42” Inspiration Plus shown)
Standing position(42” Inspiration Plus shown)
36”H15RU available
42”H19RU available
Specifications
Total internal area (nominal) 21.5”W [54.6 cm] x 18.75”D [47.6 cm] x 28”H [71.1 cm] (36”H)34”H [86.4 cm] (42”H)
Standard rack rail 36”H15RU
42”H19RU
5” Balloon Wheels Weight capacity 325 lb [148 kg] each
Certifications / Compliance • SCS Indoor Advantage Certified• TAA compliant
• Meets or exceeds applicable ANSI-BIFMA test standards
Unit weight (nominal) 36”H89 lb [40.4 kg]99 lb [45 kg] with OCC
42”H95 lb [43.1 kg]105 lb [47.7 kg] with OCC
Shipping weight (nominal) 36”H124 lb [56.3 kg]134 lb [60.8kg] with OCC
42”H130 lb [59 kg]140 lb [63.6 kg] with OCC
Specifications subject to change without notice
Audience-side view
55411 - FM FM B 42 S1 0 2 5B 0 2 1 1Parent
NumberInstructor-Side Door:0 = None1 = YesKeyboard Tray:0 = None1 = YesCove™ Power Module:0 = None1 = Yes-Black2 = Yes-SilverAudience-side door with custom logo:0 = Door only1 = Door with Custom Logo (Matching laminate backer)2 = Door with Custom Logo (White laminate backer)3 = Door with Custom Logo (Black laminate backer)Base:5B = Four 5” Swivel Balloon WheelsSR = Two Swivel / Two Rigid 5” Balloon WheelsTK = Toe KickFlip-Up Shelf: (Laminate color matches lectern worksurface)0 = None2 = Yes on Right-Side3 = Yes on Left-Side4 = Yes on Both Sides (2 shelves)15RU Rear Rack Rail:0 = None1 = YesWorksurface Style:S1 = Surround (no cutouts)S2 = Surround (with special cutouts)S4 = Surround with installed Cove power moduleB1 = Overbridge Control Console™ - no cutoutsB2 = Overbridge Control Console™ - with special cutoutsWorksurface Height:36 = 36”H42 = 42”H
Lam
inat
e co
lor
Edg
eban
d co
lor
Met
al c
olor
See www.spectrumfurniture.com for details on Expressions colors
Page 3 of 19revised 11/30/16
Configured Number Breakdown
Page 4 of 19revised 11/30/16
Note: Shown with optional instructor-side door. If the door option is used on a 36”H Inspiration Plus Lectern, a keyboard tray cannot be used.
Note: Shown with optional instructor-side door. If the door option is used on a 42”H unit without an installed keyboard tray, a 4RU rack-mount blank should be installed above the door to maintain security.
• Overbridge with blank insert panel for custom cutouts(see p.14 for dimensions). Overbridge is not available separately.
• Includes two 2” grommet holes with covers• Worksurface in front of overbridge includes two .375” holes with
plugs for optional monitor arm mounting.• When configured with keyboard tray, the short slide is used
• Surround with two 2” grommet holes with covers in worksurface• Two .375” holes with plugs for optional monitor arm mounting• When configured with keyboard tray, the long slide is used
Worksurface Height
ORDER CODE 42 = 42”HORDER CODE 36 = 36”H
Worksurface Style
ORDER CODE S1 = Surround ORDER CODE B1 = Overbridge Control Console
ORDER CODE S2 = Surround with special cutout(s)
ORDER CODE B2 = Overbridge Control Console with special cutout(s)
ORDER CODE S4 = Surround with cutout for Cove™ Power Module
Page 5 of 19revised 11/30/16
Cutouts in blank overbridge panels can be made by the customer after the lectern has been purchased, but are only recommended within the cutout areas shown.
• Contact Spectrum to specify cutout size(s) and location(s)
• See location recommendations at right• When configured with keyboard tray, the
cutout size determines if short or long slide is used. Worksurfaces with the standard Cove™ cutout will use the long slide.
• Contact Spectrum to specify cutout size(s) and location(s)• Panel color: black• See cutout recommendations at right• When configured with keyboard tray, the short slide is used
Inspiration Overbridge insert panel blank(flat view)
(shown with optional keyboard tray)
Max cutout area
Max cutout area
Max cutout area
Spectrum can provide cutouts exactly matching any commercially available data and electrical power outlet, but are only recommended within the maximum cutout areas shown. Cutouts should be reviewed by Spectrum to ensure clearance of brackets, keyboard tray slides, or other objects under the worksurface.
*When ordering a lectern with cutouts, specify complete details of the device(s) (brand, model number, cutout size, quantity, etc.) to the Spectrum sales rep when ordering.
Cutout for Cove™
Power Module
Note: Spectrum Industries, Inc, manufactures furniture that supports a wide variety of power and communication devices from a variety of manufactur-ers. This lectern is compatible with many Extron, Crestron, Altinex, AMX, and other devices. Spectrum does not resell these products; please consult your electronic supplier for the equipment that best suits your needs. Size specifications from the manufacturer can be used to verify the fit.
Note: Some controllers and devices require additional space around the cutout for clamping under the worksurface. Please double check your device specifications to ensure adequate space around the cutout.
Rear Rack Rail
ORDER CODE 0 = None
ORDER CODE 1 = Yes
Page 6 of 19revised 11/30/16
15RU Rear Rack Rail Kit
• Set of 2 rails with mounting brackets
Note: Power and communication wiring for document cam-eras, laptop computers, and/or projectors placed on the flip-up shelf should be routed on top of the audience-side of the shelf. Use of the shelf grommet hole for wiring will result in pinching of the cords when the shelf is folded.
• Shelf hinges lock into place in the upright position• Includes 2” grommet• Mounts on left or right (max 2 per unit)• Available in White Chalk Dry Erase laminate. Flip-up shelves configured
with white laminate will have the same edgeband color as the worksurface and base panel.
• Shelf factory-installed level with worksurface
Weight capacity: 35 lb [15.9 kg]Dimensions: 16”W [40.6 cm] x
19.375”D [49.2 cm]
Flip-Up Shelf Option
ORDER CODE 0 = None
ORDER CODE 2 = Installed on Right (1 shelf)
ORDER CODE 3 = Installed on Left (1 shelf)
ORDER CODE 4 = Installed on both sides (2 shelves)
Base Options
Audience-Side Door with Custom Logo
BW5” Balloon Wheels (four swivel)
Provides more maneuverability in tight spaces, but less control when mobile
SR 5” Balloon Wheels (two swivel / two rigid)
Provides more control when mobile, but less maneuverability in tight spaces
ORDER CODE 0 = Door only
ORDER CODE 1 = Audience-side door with custom logo(with matching laminate backer)
ORDER CODE 2 = Audience-side door with custom logo(with white laminate backer)
ORDER CODE 3 = Audience-side door with custom logo(with black laminate backer)
ORDER CODE TK = Toe Kick
ORDER CODE SR = Two Swivel / Two Rigid 5” Balloon Wheels
ORDER CODE 5B = Four 5” Swivel Balloon Wheels
Page 7 of 19revised 11/30/16
HEREYOUR LOGO
Audience-Side Door with Custom Logo
• Available for 36”H, or 42”H Inspiration lecterns• With single bolt lock• To get door customized-contact Spectrum for details• New logos require a first time logo charge
Dimensions: 20.875”W [53 cm] x 27.25”H [69.2 cm]Available logo area: 18”W [45.7 cm] x 11”H [27.9 cm]
Cutout required: 5.25”W [13.3 cm] x 2”D [5.1 cm](mounts to surface thicknesses up to 1.5”)
Power cord: 9’ [274 cm] with 90° flat plug with 45° rotationPower receptacles: 12A, 120 VAC spill-resistantUSB charging ports: 2.1A (10.5W)Dimensions: 6”W [15.2 cm] x 2.5”D [6.35 cm] x 3.18”H [8.1 cm]Unit weight: 2.29 lb [1 kg]
Cove™ Power Module
• Two power receptacles• Two USB charge ports
(not data-compatible)• Thumbscrew clamps
• Requires worksurface cutout• ETL listed• Available in Black or Silver• Factory-installed
Cove™ Power Module Option
Standard Cove location(available in Surround version only)
Black Cove™ Power Module Silver Cove™ Power Module
ORDER CODE 0 = None
ORDER CODE 1 = Yes-Black
ORDER CODE 2 = Yes-Silver
Page 8 of 19revised 11/30/16
Keyboard Tray
ORDER CODE 0 = None ORDER CODE 1 = Yes
Instructor-side door
ORDER CODE 0 = None
ORDER CODE 1 = Yes
Adjustable Econo Keyboard Tray
• Keyboard tray: 18.375”W [46.67 cm]• Max 1 per unit
Capacity: 1 KeyboardDimensions: 18.97”W [2.46 cm] x 16.7”D [42.4 cm]Platform clampingrange:
5.375”D [13.7 cm] - 9.25”D [23.5 cm](Keyboard depth must be within this range)
Tilt + / - 15°
Page 9 of 19revised 11/30/16
Note: The keyboard tray occupies 3RU at top of rack rail. Shown with optional instructor-side door. If the door option is used on a 36”H Inspiration Plus Lectern, a keyboard tray cannot be used.
Keyboard Tray with Long Slide:
17.75”D [45.1 cm]
Included on configured lecterns with:• Surround worksurfaces
Note: When the door option is used on a 36”H Inspira-tion Plus Lectern, a keyboard tray cannot be used. If the door option is used on a 42”H unit without an installed keyboard tray, a 4RU rack-mount blank is recommended above the door to maintain security.
Keyboard Tray with Short Slide:
13.75”D [30.5 cm]
Included on configured lecterns with:• Overbridge worksurface• Surround worksurface with large
custom cutouts
Instructor-Side Door
• Available for 36”H, or 42”H lecterns• With single bolt lock• Can be installed to be hinged on left or right
Dimensions: 20.875”W [53 cm] x 27.25”H [69.2 cm]
Available logo area: 18”W [45.7 cm] x 11”H [27.9 cm]
Page 10 of 19revised 11/30/16
Note: Modified worksurface cutouts should be reviewed by Spectrum to ensure clearance of brackets, key-board slides, or other objects under the worksurface.
Left and right .375” monitor arm mounting holes
42” Inspiration Plus Lecternwith 5” Balloon Wheels
Toekick
Page 11 of 19revised 11/30/16
42” Inspiration Plus Lectern with Toekick
36” Inspiration Plus Lectern with 5” Balloon Wheels
Page 12 of 19revised 11/30/16
Optional flip-up shelf
A
A
Optional rear rack rail
Standard front rack rail
Optional keyboard tray (occupies 3RU at top of rack rail)
42” Inspiration Plus Lectern section view
Optional flip-up shelfB Optional rear
rack railStandard front rack rail
36” Inspiration Plus Lectern section view
B
Optional instructor-side door
Note: Rack-mount accessories with a depth greater than 18”D will not fit inside the lectern. Check the dimensions of all equipment before installation.
Optional instructor-side door
Left and right .375” monitor arm mounting holes
Page 13 of 19revised 11/30/16
36” Inspiration Plus Lecternwith Overbridge Control Console
and 5” Balloon Wheels
Max cutout area
Worksurface
Overbridge panel
Page 14 of 19revised 11/30/16
Inspiration Plus Overbridge Insert Panel Blank(flat view)
2” Grommet
Overbridge section view
Worksurface opening below
2” Grommet
Note: The Overbridge Control Console™ has been designed for many of the currently available controllers on the market, however, modified cutouts should be reviewed by Spectrum to ensure clearance of brackets, keyboard slides, or other objects under the worksurface.
Contact Spectrum to specify cutout size(s) and location(s).
Cutouts can be made in the blank insert panel by the customer after the lectern has been purchased, but are only recommended within the cutout area shown.
Page 15 of 19revised 11/30/16
Note: 42” Inspiration Plus Lecterns have an audience-side structural panel that limits ac-cessible rear rack spacing to 15RU.
Note: Power and communication wiring for document cameras, laptop computers, and/or projectors placed on the flip-up shelf should be routed on top of the audience-side of the shelf. Use of the shelf grommet hole for wiring will result in pinching of the cords when the shelf is folded.
Note: When the door option is used on a 36”H Inspiration Plus Lectern, a keyboard tray cannot be used. If the door option is used on a 42”H unit without an installed keyboard tray, a 4RU rack-mount blank is recommended above the door to maintain security.
Note: When fully-retracted, the keyboard tray oc-cupies 3RU of rack space at the top of the lectern. When the door option is used on a 36”H Inspira-tion Plus Lectern, a keyboard tray cannot be used.
HEREYOUR LOGO
Accessories (Available separately after initial configured purchase.)
Audience-Side Door with Custom Logo - 55414
• Available for 36”H, or 42”H Inspiration lecterns• With single bolt lock• Available with black, white, or matching laminate
backer• To get door customized-contact Spectrum for details• New logos require a first time logo charge
Dimensions: 20.875”W [53 cm] x 27.25”H [69.2 cm]
Available logo area: 18”W [45.7 cm] x 11”H [27.9 cm]
Shipping weight: 14.1 [6.4 kg]
Instructor-Side Door - 55405
• Available for 36”H, or 42”H lecterns• With single bolt lock• Can be installed to be hinged on left or right
Dimensions: 20.875”W [53 cm] x 27.25”H [69.2 cm]
Available logo area: 18”W [45.7 cm] x 11”H [27.9 cm]
Shipping weight: 14.1 lb [6.4 kg]
Flip-Up Shelf - 55412
• Shelf hinges lock into place in the upright position
• Includes 2” grommet• Available in White Chalk Dry Erase laminate• Mounts on left or right (max 2 per unit)
Weight capacity: 35 lb [15.9 kg]Dimensions: 16”W [40.6 cm] x
19.375”D [49.2 cm]Shipping weight: N/A
Adjustable Econo Keyboard Tray
95520 - Long slide: 17.75”D [45.1 cm](for surround lecterns)
95531 - Short slide: 13.75”D [30.5 cm](for overbridge lecterns)
Capacity: 1 KeyboardDimensions: 18.97”W [2.5 cm] x 16.7”D [42.4 cm]Platform clampingrange:
5.375”D [13.7 cm] - 9.25”D [23.5 cm](Keyboard depth must be within this range)
Tilt + / - 15°Shipping weight: 14 lb [6.4 kg]
Power Strip + (2) Cord Wraps - 55404
• 7-outlet surge-protected
Power Strip: 12”W [30.5 cm] x 2”D [5.1 cm] x 1.3125”H [3.3 cm]
Power Cord: 24” [457.2 cm] cordShipping weight: 2.4 lb [1.1 kg]
Rear Rack Rail Kit
55408 - 36”H [91.4 cm] (15RU)55407 - 42”H [106.7 cm] (19RU)
• Set of 2 rails with mounting brackets
Shipping weight: 4.9 lb [2.2 kg] - 554085.9 lb [2.7 kg] - 55407
55413 - FM FM CM TW 0Parent
Number
Custom Worksurface Cutout Request:0 = None2 = Yes - in WorksurfaceBase:1 = Twin Wheels2 = Toe KickMetal Color:B = BlackCM = Champagne MetallicD = Dark GrayS = Silver Sparkle
Laminate Color:†
Sta
ndar
d La
min
ates FM = Fusion Maple FM = Fusion Maple
IO = Indigo Organix BK = Black (non-matching)
CH = Wild Cherry CH = Wild Cherry
Pre
miu
m L
amin
ates
* (2
8-da
y le
ad ti
me)
BK = Black BK = Black
BL = Bronze Legacy BL = Bronze Legacy
CK = Castle Oak CK = Castle Oak
CW = Colombian Walnut CW = Colombian Walnut
DZ = Desert Zephyr DZ = Desert Zephyr
EM = Empire Mahogany EM = Empire Mahogany
MO = Morro Zephyr MO = Morro Zephyr
MZ = Misted Zephyr SN = Silver Northsea (non-matching)
NP = Nepal Teak NP = Nepal Teak
NT = Natural Tigris NT = Natural Tigris
PM = Pewter Mesh PM = Pewter Mesh
SM = Steel Mesh SM = Steel Mesh
TZ = Twilight Zephyr TZ = Twilight Zephyr
WF = White Fiesta BK = Black (non-matching)
WD = White Chalk Dry Erase (Matches Laminate Color)
Edgeband Color:
Page 16 of 19revised 11/30/16
Twin Wheels
Toe Kick
Balloon Wheels
Glides
Inspiration Side Table - 55413
• For 36”H, or 42”H lecterns• ADA-compliant• Available with Twin-wheels casters for BW
lecterns, or Glides for TK lecterns• Mounts on left or right-side
Dimensions: 36”W [91.4 cm] x 24”D [61 cm] x 29”H [73.7 cm]
Shipping weight: 62 lb [28.1 kg]
Product number breakdown
All configured options are factory-installed unless noted otherwise.
Premium laminate colors require an additional 14 days of lead time.Laminate colors come with matching edgeband color, with these exceptions: Indigo Organix Laminate comes with Black edgeband, Misted Zephyr Laminate comes with Silver Northsea edgeband, and White Fiesta Laminate comes with Black edgeband.
*†
Note: White Chalk Dry Erase laminate is only available on the flip-up shelf option-not the worksurface.
Note: Flip-up shelves configured with white laminate will have the same edgeband color as the worksurface and base panel.
Page 17 of 19revised 11/30/16
Available rack spacing
Maximum Equipment Depth
Maximum Equipment Depth
Vertical left(takes up 6RU)
Vertical right(takes up 6RU)
Horizontal right(takes up 3RU)
Power cord: 15’ nominal, 12 AWG retractable power cordPower receptacles: • Molded 3-prong male plug with 15A
breaker and reset button• Tri-tap (3-outlet) receptacle
Universal mounting bracket
• 16-gauge steel• Black powder coat• Includes mounting screws
Unit weight: 10 lb [4.5 kg]Shipping weight: 10.8 lb [4.9 kg]
Universal Cord Reel Kit - 99037
• Includes universal mounting bracket• Mounts inside lectern to base panel• Adjustable ball stop and releasable cord-locking
ratchet holds the cord at any length up to 15’• cUL listed• Customer-installed
The cord reel is intended to provide temporary access to electrical outlets for Spectrum mobile lecterns. Check local electrical codes prior to installation.
Optional Universal Cord Reel(Available positions on base)
See spectrumfurniture.com for the latestaccessories and detailed warranty information.
Page 18 of 19revised 11/30/16
Overbridge Insert Panel
96501 - Blank panel96501mod - Panel with cutout(s)
Contact Spectrum to specify cutout size(s) and position(s)
• For overbridge version only• Overbridge not available separately• Includes two 2” [5.08 cm] grommets with covers• Shipping weight: 5.7 lb [2.6 kg]
Cutout required: 5.25”W [13.3 cm] x 2”D [5.1 cm]Power cord: 9’ [274 cm] with 90° flat plug with 45° rotationPower receptacles: 12A, 120 VAC spill-resistantUSB charging ports: 2.1A (10.5W)Dimensions: 6”W [15.2 cm] x 2.5”D [6.35 cm] x 3.18”H [8.1 cm]Unit weight: 2 lb [.9 kg]Shipping weight: 2.29 lb [1 kg]
Cove™ Power Module - 99044
• Two power receptacles• Two USB charge ports
(not data-compatible)• Thumbscrew clamps
• Requires worksurface cutout• ETL listed• Available in Black or Silver• Customer-installed
WE WILL MAKE IT RIGHT FOR YOU!
Spectrum is committed to provide complete customer satisfaction. Each of our products is manufactured from the best materials available and each product is stringently monitored throughout the production process through our P.A.C.E. program (Product Assurance to meet Customer Expectations).
We expressly warrant that Spectrum products will be of good quality and workmanship and free from defect for the period set out in the warranty table below from the date of delivery. This warranty shall not apply to defects or damage resulting from misuse, abuse, neglect, improper care, modifi cation or repair not authorized by Spectrum, or any other cause outside the control of Spectrum. Spectrum will, at its sole option, either repair or replace the defective product.
This warranty is exclusive; no other warranty, written or oral, is expressed or implied. This warranty is given by Spectrum to Buyer and to no other per-son or legal entity. No Spectrum dealer, distributor, agent or employee is authorized to make any modifi cation or addition to this warranty.
NOTWITHSTANDING ANYTHING TO THE CONTRARY, SPECTRUM WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE FOR INDIRECT OR LIQUI-DATED DAMAGES, INCLUDING CONSEQUENTIAL, INCIDENTAL AND SPECIAL DAMAGES. IN NO EVENT SHALL SPECTRUM’S LIABILITY, WHETHER UNDER CONTRACT OR WARRANTY, IN TORT OR OTHERWISE, EXCEED THE PURCHASE PRICE RECEIVED BY SPECTRUM FOR THE PRODUCT AT ISSUE AND “RECALL ACTION” EXPENSES. SPECTRUM SHALL NOT BE SUBJECT TO ANY OTHER OBLIGATIONS OR LIABILITIES, WHETHER ARIS-ING OUT OF BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR OTHER THEORIES OF LAW, WITH RESPECT TO PRODUCTS SOLD OR SERVICES RENDERED BY SPECTRUM, OR ANY UNDERTAKINGS, ACTS OR OMISSIONS RELATING THERETO.
Our Customer Service Department is ready to provide immediate attention to any questions, comments or concerns. They are available to answer your calls Monday through Friday from 7 am to 5 pm CST. In addition your product comments or concerns are welcome via e-mail at: [email protected].
ItemWarranty Period
effective 1/1/2015
Adjustable Crank / Electric Desk Legs• 1 Year
Flat Panel Desk Gas Cylinders
Chairs
• Adjustable Height Chair Parts – including frames, gas cylinders, wood and plastic parts, control handles, casters
• Adjustable Height Chair Upholstery• In-Stock Upholstery• Graded-In Fabrics and Customer Owned Material
• 7 Years
• 2 Years• 2 Years• No Warranty
Height Adjustable Columns and Lifts• 1 Year
General Use Casters
Electrical (including timers and LINAK actuators) • 2 Years
Keyboard / Mouse Trays • 1 Year
Flat Panel Monitor Arms
• Flat Panel Monitor Arm – General Parts• Flat Panel Monitor Arm – Gas Cylinders
• 5 Years• 2 Years
Desks and Lecterns
• Computer Desk Chassis• Cart Chassis• Lectern Chassis
• 10 Years
Warranty Table
Warranty
925 FIRST AVENUE, CHIPPEWA FALLS, WI 54729 / 800-235-1262 / 715-723-6750 / WWW.SPECTRUMFURNITURE.COM
© 2016 Spectrum Industries Inc., All rights reserved.
8
DESIGNED AND ASSEMBLED IN
CHIPPEWA FALLSWISCONSIN.USA
Page 19 of 19revised 11/30/16