DescriptionCategories: Inspection operationPublished on Tuesday, 29 January 1391 14:30Posted by RezazadehViews: 3403

Inspection characteristics during operation

Inspection of the measures suggested by experts familiar with troubleshooting technical inspection to determine device status and to ensure the safety of their operations apply. Inspector of the

Inspection qualified person is said to do the work.

This text is Distinguished University Professor by the oil industry, Mr. Khosrow Khfy born students graduate prepared to become familiar with the duties of inspector of safety and technical inspection in

the oil industry. According to the objectives and policies of the University and the Ministry of Oil, raising the technical inspection during operation with a higher priority than the technical inspection of

construction and installation of necessary equipment director and founder of the field in college. He therefore Inspection conditions and obligations in the area of operation during the inspection are thus

explained.

Inspection requirements:

Technical Inspector must:

The bright, caregivers curious, careful, hardworking and perfect in every respect.

Able to provide good decisions and opinions.

To have sufficient mastery of basic science and English.

The school is not enough.

Industrial experience is.

The vision is good.

Able to climb ladders and enter the narrow and complex devices.

Be familiar with the nature and workings of the machines.

The causes of system failure and damage caused by them is familiar.

International Standards Inspectorate to recognize and know how to use them.

The science of corrosion, Protection of metals, welding and material is familiar.

The writing is fluent.

Safety issues carefully and observe well.

Interested in the technical inspection.

Inspection tasks:

Technical Inspector must:

Calculation to determine the age of the machines do.

Inspection and tests measuring different things.

Destructive and nondestructive testing tasks successfully.

Time or periodic inspections necessary to determine the devices.

With maps and documents, technical specifications and other documentation to understand and interpret them.

Sampling and testing properly done.

The results of the calculations, measurements and tests are well interpreted and used.

Written instructions and perform various tasks that follow.

Discover the causes of failure of the device.

Types of corrosion and how to prevent it declares.

The technical reports written in plain language, distribute, and archive them.

Inspection characteristics during

operation

Inspection characteristics during operation https://translate.googleusercontent.com/translate_c?act=url&depth=1&h...

1 of 1 9/11/2014 8:35 AM