INSPECTION EQUIPMENT REGISTER AT CNC MACHINE...
2
Blackbird Asset Services, LLC 5586 Main Street, Suite 204 Williamsville, NY 14221 Email: [email protected] Tel. 716.632.1000 Fax. 888.606.7544 www.blackbirdauctions.com CNC MACHINE SHOP Blackbird Asset Services, LLC 5586 Main Street Suite 204 Williamsville, NY 14221 Blackbird Asset Services, LLC 5586 Main Street, Suite 204, Williamsville, NY 14221 Presorted First Class Mail U.S. Postage PAID Eugene, Oregon Permit No. 17 ASSOCIATION OF MACHINERY AND EQUIPMENT APPRAISERS NO WARRANTIES: Everything in this auction sale is sold “AS IS, WHERE IS” and WITHOUT RECOURSE. There are no warran- ties, guarantees or representations of any kind or variety, whether expressed, implied or otherwise given. PAYMENT: ALL PURCHASES MUST BE PAID IN FULL ON THE DAY OF THE AUCTION. All on site purchases subject to a 15% buyer’s premium, 18% webcast. Payment may be made by cash, certified funds, ACH or wire transfer (instructions on invoice). MasterCard and Visa accepted up to $5,000, 3% convenience fee for credit card purchases. Company checks will be accepted only if accompanied by a letter from the issuing bank that reads: (Bank Name) unconditionally guarantees payment to Blackbird Asset Services, LLC from (Purchasers Name) on account number ______ up to the amount of $________. This guarantee will be valid for purchases made at the AMC Precision auction on Tuesday, February 10. SALES TAX: All purchases subject to 7.0% sales tax unless purchaser supplies auctioneer with valid tax exemption documen- tation. Out of state purchasers may be entitled to a sales tax refund after a bill of lading proving their purchasers were shipped out of state by a third party carrier. Auctioneer reserves the right to charge sales tax to any purchaser and require purchaser to seek a refund from the state taxing authority. INSPECTION: Open inspection will be Monday, February 9 between 9:00 A.M.–3:00 P.M. Other inspection times by appoint- ment only. REMOVAL: Removal for smalls and hand carry items will be Wednesday, February 11 through Saturday, February 14, 8:00 A.M.–4:00 P.M. only. Riggers scheduled thereafter by appointment. All purchases must be removed no later than February 28. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. See website for qualified riggers and other downloads. AIRPORT & TRANSPORTATION: Most commercial flights to the area are to Buffalo Niagara International Airport (BUF). HOTELS: Sleep Inn, Innkeepers Lane, Amherst, NY 866-599-6674; Holiday Inn Buffalo Airport, Genesee Street, Cheektowaga, NY 855-809-3505. DIRECTIONS FROM BUF: Exit airport to Route 33 West. Exit for I-90 East toward I-290 West for Niagara Falls. Take Exit #50 to I-290 West toward Niagara Falls. Continue 6 miles to Exit #2 for NY-425 and turn right onto NY-425 North. Continue 2.5 miles to Robinson Road. Turn left onto Robinson Road. In 200 yards turn right onto Fasset Street and proceed to end of street and auction site. GENERAL TERMS OF SALE QS-0024890 AUCTION SITE SECURED CREDITOR AUCTION CNC MACHINE TOOLS SECURED CREDITOR AUCTION LIVE AUCTION WITH WEBCAST February 10th 10:00 A.M. EST Equipment Location: 430 ROBINSON STREET, N. TONAWANDA, NY 14120 (BUFFALO AREA) SECURED CREDITOR AUCTION Tuesday, February 10 10:00 A.M. EST LIVE AUCTION WITH WEBCAST AMC PRECISION, INC. 430 Robinson Street, North Tonawanda, NY 14120 (Buffalo Area) REGISTER AT PARLEC PARSETTER TMM Precision Tool Presetter, series 3000, with Realvision, Model P30-3030. MICROSTAR 330-201 Coordinate Measuring Machine Model 330-201, 34" x 59" x 20", with CMM manager version 2.0.0.2 software, Renishaw probe, Dell OPTiplex 745, XP SP3, 1.86 GHz, 2 GB RAM, 75 GB HDD, built 1990. ZEISS ECLIPSE 4CMM10 CNC CMM (model code SYS, EC, 2828, DCC, TS, C99/II), 21" x 36" x 24" (not installed), Zeiss probe, built 1997. SHEFFIELD CORDAX RS-30 DCC CMM, 42" x 32" x 24", Renishaw PH10MQ probe, Renishaw probe head controller PHC10, NX 4.0.4.2 software, Dell Precision 670, WIN XP SP3, 3.60 GHz, 3.25 GB RAM, 75 GB HDD, built 1989. Extensive Selection of Metrology Tools and Gauges Including: ID and OD Micrometers, Plug Gauges, Pin Gauges, Rotary Head Gauges, Taper Plugs, Bore Gauges, V-Tooth Gauges, Gauge Blocks, Thread Gauges, Dial Calipers, Sine Plates, Height Gauges, V-Blocks, Selection of Surface Plates in Various Sizes. MORI SEIKI SL-65 CNC TURNING CENTER 1996 HAAS YF-2YT VERTICAL MACHINING CENTER 2011 UNDER 1,000 HRS. 4TH AXIS CAPABLE HAAS VF-8 CNC VERTICAL MACHINE CENTER 4TH AXIS CAPABLE INSPECTION EQUIPMENT ZEISS ECLIPSE 4CMM10 CNC CMM PARLEC PARSETTER TMM PRECISION TOOL PRESETTER MICROSTAR MDL. 330-201 CMM SHEFFIELD CORDAX RS-30 DCC CMM PLANT SUPPORT & MISC. – OVER 2,000 BT-40 TOOL HOLDERS! SECURED CREDITOR AUCTION GPS to this address produces false results as AMC Precision is located on a back lot to Robinson Street. Please follow directions. Email: [email protected] Tel. 716.632.1000 Fax. 888.606.7544 CONTACT INFORMATION: For further information contact our office by phone at 716-632-1000 or by email to [email protected]. FOR COMPLETE TERMS OF SALE PLEASE REFER TO THE AUCTION CATALOG. ALL TERMS OF SALE ANNOUNCED AT THE TIME AND PLACE OF SALE TAKE PRECEDENCE OVER PRINTED MATERIALS. YALE 3,000-LB. LP FORKLIFT VIEW OF MACHINE TOOLING < OVER 2,000 BT-40 TAPER TOOL HOLDERS THERMAL ARC PAK 5XT PLASMA CUTTER 1997 LIKE NEW SELECTION OF CAT-50 TOOL HOLDERS YALE 3,000-Lb. LP Forklift, 257" lift, solid tires, Model GLC030CENUAE077, approx. 7,821 hours. NEW HOLLAND Diesel Skid Steer Model L555, standard bucket, approx. 3,338 hours. HYSTER Diesel Forklift, 5,232 hours, 2-stage mast, pneumatic tires, PRX 14,000-lbs. MILLER SYNCHROWAVE 250 Welder Model 903506, AC/DC welding power service, Magnum system monitor. DEVILBISS 10 HP 4-Cylinder Air Compressor, tank mounted, model VAT 5060, built 1976. Large Quantity of Lathe Tooling Including: Tool and Cutter Holders, Boring Bars, Centers, Collets, Holders, Adapters, Chucks, Chuck Inserts and Grips. Large Quantity of Mill and Machine Center Tooling Including: BT-40 Tool Holders, CAT-50 Tool Holders, Boring Attachments, Probes, Cutters, Collets, Mills, Tool Holders, Carts, Tombstones, Work Holders, Angle Plates, Etc. Misc. Plant Support Including: Flammable Cabinets, Parts, Bins and Hardware, RYOBI 10" Table Saw, EASTWOOD Buffer, Work Benches, Pneumatic Drill Press, Rolling Die Carts, Carts, Barrel Carts, Scales, (2) Sandblast Cabinets, Pedestal and Bench Grinders, Belt Sanders, Chop Saws, Fans, Ladders, Strapping Carts and Shipping Equipment, Bench Grinders, Drill Press, Lockers, Safety Equipment, Station Tooling and Hand Tools, Foreman’s Desks, Pallet Jacks, Grinding Wheels, Pallet Racking and Shelving, Barrel Carts, Waste Oil Tank (500-gallon), Barrel Attachment, Plasma Cutter, Vibratory Polishers, 16" x 50" Sine Plate, Rockwell Model 15 Drill and Tap Machine. Office Furniture, Fixtures and Equipment Including: Various File Cabinets, Desks, Chairs, Conference Table, Shelves, Computers, HP Laserjet 5Si and Designjet 650C (large format) Printers, COLLECTABLE SNAP-ON TOOL BOX SET, Unique Wood Carvings and Other Office Furniture – See Website For Photos. WEBCAST VIA
Transcript of INSPECTION EQUIPMENT REGISTER AT CNC MACHINE...
Blackbird Asset Services, LLC5586 Main Street, Suite 204Williamsville, NY 14221
Email: [email protected]. 716.632.1000Fax. 888.606.7544
www.blackbirdauctions.com
CNC MACHINE SHOPBlackbird Asset Services, LLC5586 Main Street Suite 204Williamsville, NY 14221
Blackbird Asset Services, LLC5586 Main Street, Suite 204, Williamsville, NY 14221
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
NO WARRANTIES: Everything in this auction sale is sold “AS IS, WHERE IS” and WITHOUT RECOURSE. There are no warran-ties, guarantees or representations of any kind or variety, whether expressed, implied or otherwise given.
PAYMENT: ALL PURCHASES MUST BE PAID IN FULL ON THE DAY OF THE AUCTION. All on site purchases subject to a 15% buyer’s premium, 18% webcast. Payment may be made by cash, certified funds, ACH or wire transfer (instructions on invoice). MasterCard and Visa accepted up to $5,000, 3% convenience fee for credit card purchases. Company checks will be accepted only if accompanied by a letter from the issuing bank that reads: (Bank Name) unconditionally guarantees payment to Blackbird Asset Services, LLC from (Purchasers Name) on account number ______ up to the amount of $________. This guarantee will be valid for purchases made at the AMC Precision auction on Tuesday, February 10.
SALES TAX: All purchases subject to 7.0% sales tax unless purchaser supplies auctioneer with valid tax exemption documen-tation. Out of state purchasers may be entitled to a sales tax refund after a bill of lading proving their purchasers were shipped out of state by a third party carrier. Auctioneer reserves the right to charge sales tax to any purchaser and require purchaser to seek a refund from the state taxing authority.
INSPECTION: Open inspection will be Monday, February 9 between 9:00 A.M.–3:00 P.M. Other inspection times by appoint-ment only.
REMOVAL: Removal for smalls and hand carry items will be Wednesday, February 11 through Saturday, February 14, 8:00 A.M.–4:00 P.M. only. Riggers scheduled thereafter by appointment. All purchases must be removed no later than February 28. Riggers are encouraged to review the PDF catalog and submit insurance certificates in advance of the auction. See website for qualified riggers and other downloads.
AIRPORT & TRANSPORTATION: Most commercial flights to the area are to Buffalo Niagara International Airport (BUF).
HOTELS: Sleep Inn, Innkeepers Lane, Amherst, NY 866-599-6674; Holiday Inn Buffalo Airport, Genesee Street, Cheektowaga, NY 855-809-3505.
DIRECTIONS FROM BUF: Exit airport to Route 33 West. Exit for I-90 East toward I-290 West for Niagara Falls. Take Exit #50 to I-290 West toward Niagara Falls. Continue 6 miles to Exit #2 for NY-425 and turn right onto NY-425 North. Continue 2.5 miles to Robinson Road. Turn left onto Robinson Road. In 200 yards turn right onto Fasset Street and proceed to end of street and auction site.
GENERAL TERMS OF SALE
QS-0024890
AUCTION SITE
SECURED CREDITOR AUCTION
CNC MACHINE TOOLS
SECURED CREDITOR AUCTIONLIVE AUCTION WITH WEBCASTFebruary 10th 10:00 A.M. ESTEquipment Location:430 ROBINSON STREET, N. TONAWANDA, NY 14120(BUFFALO AREA)
SECURED CREDITOR AUCTION
Tuesday, February 1010:00 A.M. ESTLIVE AUCTION WITH WEBCAST
AMC PRECISION, INC.430 Robinson Street, North Tonawanda, NY 14120(Buffalo Area)
REGISTER AT
PARLEC PARSETTER TMM Precision Tool Presetter, series 3000, with Realvision, Model P30-3030.
MICROSTAR 330-201 Coordinate Measuring Machine Model 330-201, 34" x 59" x 20", with CMM manager version 2.0.0.2 software, Renishaw probe, Dell OPTiplex 745, XP SP3, 1.86 GHz, 2 GB RAM, 75 GB HDD, built 1990.
ZEISS ECLIPSE 4CMM10 CNC CMM (model code SYS, EC, 2828, DCC, TS, C99/II), 21" x 36" x 24" (not installed), Zeiss probe, built 1997.
SHEFFIELD CORDAX RS-30 DCC CMM, 42" x 32" x 24", Renishaw PH10MQ probe, Renishaw probe head controller PHC10, NX 4.0.4.2 software, Dell Precision 670, WIN XP SP3, 3.60 GHz, 3.25 GB RAM, 75 GB HDD, built 1989.
Extensive Selection of Metrology Tools and Gauges Including: ID and OD Micrometers, Plug Gauges, Pin Gauges, Rotary Head Gauges, Taper Plugs, Bore Gauges, V-Tooth Gauges, Gauge Blocks, Thread Gauges, Dial Calipers, Sine Plates, Height Gauges, V-Blocks, Selection of Surface Plates in Various Sizes.
MORI SEIKI SL-65 CNC TURNING CENTER
1996
HAAS YF-2YT VERTICAL MACHINING CENTER
2011
UNDER 1,000 HRS.
4TH AXIS CAPABLE
HAAS VF-8 CNC VERTICAL MACHINE CENTER
4TH AXIS CAPABLE
INSPECTION EQUIPMENT
ZEISS ECLIPSE 4CMM10 CNC CMMPARLEC PARSETTER TMM PRECISION TOOL PRESETTER
MICROSTAR MDL. 330-201 CMM SHEFFIELD CORDAX RS-30 DCC CMM
PLANT SUPPORT & MISC. – OVER 2,000 BT-40 TOOL HOLDERS!
SECURED CREDITOR AUCTION
GPS to this address produces false results as AMC Precision is located on a back lot to Robinson Street. Please follow directions.
Email: [email protected]. 716.632.1000 Fax. 888.606.7544
CONTACT INFORMATION: For further information contact our office by phone at 716-632-1000 or by email to [email protected].
FOR COMPLETE TERMS OF SALE PLEASE REFER TO THE AUCTION CATALOG. ALL TERMS OF SALE ANNOUNCED AT THE TIME AND PLACE OF SALE TAKE PRECEDENCE OVER PRINTED MATERIALS.
YALE 3,000-LB. LP FORKLIFT
VIEW OF MACHINE TOOLING
<OVER 2,000 BT-40 TAPER TOOL HOLDERS
THERMAL ARC PAK 5XT PLASMA CUTTER
1997
LIKE NEW SELECTION OF CAT-50 TOOL HOLDERS
YALE 3,000-Lb. LP Forklift, 257" lift, solid tires, Model GLC030CENUAE077, approx. 7,821 hours.
NEW HOLLAND Diesel Skid Steer Model L555, standard bucket, approx. 3,338 hours.
HYSTER Diesel Forklift, 5,232 hours, 2-stage mast, pneumatic tires, PRX 14,000-lbs.
MILLER SYNCHROWAVE 250 Welder Model 903506, AC/DC welding power service, Magnum system monitor.
DEVILBISS 10 HP 4-Cylinder Air Compressor, tank mounted, model VAT 5060, built 1976.
Large Quantity of Lathe Tooling Including: Tool and Cutter Holders, Boring Bars, Centers, Collets, Holders, Adapters, Chucks, Chuck Inserts and Grips.
Large Quantity of Mill and Machine Center Tooling Including: BT-40 Tool Holders, CAT-50 Tool Holders, Boring Attachments, Probes, Cutters, Collets, Mills, Tool Holders, Carts, Tombstones, Work Holders, Angle Plates, Etc.
Misc. Plant Support Including: Flammable Cabinets, Parts, Bins and Hardware, RYOBI 10" Table Saw, EASTWOOD Buffer, Work Benches, Pneumatic Drill Press, Rolling Die Carts, Carts, Barrel Carts, Scales, (2) Sandblast Cabinets, Pedestal and Bench Grinders, Belt Sanders, Chop Saws, Fans, Ladders, Strapping Carts and Shipping Equipment, Bench Grinders, Drill Press, Lockers, Safety Equipment, Station Tooling and Hand Tools, Foreman’s Desks, Pallet Jacks, Grinding Wheels, Pallet Racking and Shelving, Barrel Carts, Waste Oil Tank (500-gallon), Barrel Attachment, Plasma Cutter, Vibratory Polishers, 16" x 50" Sine Plate, Rockwell Model 15 Drill and Tap Machine.
Office Furniture, Fixtures and Equipment Including: Various File Cabinets, Desks, Chairs, Conference Table, Shelves, Computers, HP Laserjet 5Si and Designjet 650C (large format) Printers, COLLECTABLE SNAP-ON TOOL BOX SET, Unique Wood Carvings and Other Office Furniture – See Website For Photos.
WEBCAST VIA
blackbirdauctions.comLIVE AUCTION WITH WEBCAST
CNC MACHINE CENTERSCNC MACHINE CENTERS MANUAL LATHES, MILLS & SAWS
VIEW OF VARIOUS AXIS DRIVES & TOMBSTONES
LAGUN FT-2 1.5 kW Vertical Mill, 9" x 48" table, 55–2,940 RPM, Mitutoyo 2-axis digital readout.
LAGUN FT-2 1.5 kW Vertical Mill, 9" x 48" table, 65–3,000 RPM, Servo-Feed, Teledyne pathfinder 2-axis digital readout.
LAGUN FT-2S Vertical Mill, 9" x 48" table, collet adapter, Servo-Feed, Mitutoyo 2-axis digital readout, 65–3,000 RPM.
LAGUN FT-2S Vertical Mill, 9" x 42" table, 65–3,000 RPM, Kurt vise, Teledyne pathfinder, 2-axis digital readout.
VICTOR Gap Style Engine Lathe Model 1440 G, 3 HP, 1-1/2" thru spindle, 14" x 40", 18" open gap.
VICTOR Gap Style Engine Lathe Model 1640G, 30–1,200 RPM, 16" swing x 40", 22" swing gap, tailstock, Aloris tool post, 3 and 4 jaw chucks, Acu-Rite 2-axis digital readout, 2" thru spindle.
VICTOR Gap Style Engine Lathe Model 1640G, 30–1,200 RPM, Newall DPG 2-axis digital readout, 16" swing x 40", 22" swing gap, tailstock, Aloris tool post, 3-jaw chuck, steady rest, 2" thru spindle.
VICTOR Gap Style Engine Lathe Model 1660G, 120–1,200 RPM, 16" swing x 60", 22" swing gap, tailstock, Aloris tool post, 3-jaw chuck, 2" thru spindle.
FORTUNE Gap Style Engine Lathe Model S2080, 58–1,000 RPM, Dro-Pros 2-axis digital readout, 20" swing x 80", 36" swing gap, tailstock, Aloris tool post, 3 and 4 jaw chuck, 4" thru spindle.
LONG JEN Gap Style Engine Lathe Model CW6263C/1, 630mm x 3000mm (25" x 120"), 36" open gap swing, 31-1/2" dia. 4-jaw chuck, 3-jaw chuck, 20" swing x 80", 26" swing gap, tailstock, tool post, 4" thru spindle, built 1990.
SUPERMAX Vertical Mill Series II, 11" x 52" table, 75–3,600 RPM, quality 800 2-axis digital readout model YC-2VA, built 1982.
CINCINNATI Engine Lathe, 22" x 48", 3 and 4 jaw chucks, steady rest, tailstock, toolpost, 2-1/4" thru spindle.
HARDINGE HCT-GP Plunge Style Lathe, 8-position turret, 30" bed, cross slide, with collets.
HARDINGE HC Plunge Style Lathe, 8-position turret, 30" bed, cross slide, with collets.
HYDRO-MECH Mitering Horizontal Band Saw Model S-23, 18" table, vise, mitering table.
W.F. WELLS Horizontal Band Saw, 24" x 120" roller feed conveyer, hydraulic vise.
PHOENIX PA13 Horizontal Band Saw, 150" x 1-1/4" x .0421" blade, 16" hydraulic vise, 30" x 120" heavy-duty roller feed conveyer.
DOALL Metalmaster Vertical Band Saw, 16" throat, 24" x 24" table, work light, blade welder.
DOALL Surface Grinder Model 8x24, electro magnetic chuck with Selectron rectifier model 210.
CHEVALIER FSG-618M Surface Grinder, 6" x 18" permanent magnetic chuck.
SHIGIYA SEIKI Plain Hydraulic Cylindrical Grinder Model GPA 27-60, 16" x 2" wheel, work head, tailstock, Marposs E9 gauging, variable speed head, 10.06" swing over table, 24" between centers, max. grinding diameter 6".
GRISETTI ELITE Universal Hydraulic Cylindrical Grinder Model M-1000, 11" x 39" (estimated), tailstock mounted dresser, swing down ID attachment, Dro-Pros 2-axis digital readout.
BOYAR SCHULTZ 6-12 Surface Grinder, 6" x 12" permanent magnetic chuck, with Norton Diamond wheel.
SUNNEN PRECISION Hone Model MBB1290D.
SECURED CREDITOR AUCTION15% BUYER’S PREMIUM ONSITE18% BUYER’S PREMIUM WEBCAST
COMPLETE PLANT CLOSURE – PRECISION CNC MACHINES SECURED CREDITOR AUCTION
LEADWELL LTC-15 CNC TURNING CENTER 1987 MORI SEIKI SL-4C CNC TURNING CENTER
(3 OF 4) LAGUN FT-2S VERTICAL MILLSGRISETTI ELITE MDL. M-1000 UNIVERSAL HYDRAULIC CYLINDRICAL GRINDER
VICTOR MDL. 1660G GAP STYLE ENGINE LATHE
4th Axis MATSUURA MC-600H-45 Horizontal Machining Center, 50-position automatic tool changer, PT 40 taper, X=23.62 Y=17.71" Z=18.89", twin 18" x 18" pallet, Fanuc 11M control, chip conveyer, built 1986.
4th Axis MATSUURA MC-600H-45 Horizontal Machining Center, 50-position automatic tool changer, PT 40 taper, X=23.62 Y=17.71" Z=18.89", single 18" x 18" pallet, Fanuc 11M control, chip conveyer, approx. 5,239 hours, built 1986.
MATSUURA MC-600H-45 Horizontal Machining Center, built 1986.
COMET CNC 2036 Vertical Machining Center, 20-position automatic tool changer, PT 40 taper, 20" x 48" work table, Mitsubishi Meldas MO control, X=40" Y=20" Z=20".
LEADWELL LTC-15 CNC Turning Center, 20" x 22", Fanuc OT control, 8-position turret, 3-jaw chuck, live tailstock, chip conveyer, 2,373 hours.
OKUMA LB-15 CNC Turning Center, 12-position turret, 3-jaw chuck, live tailstock, Okuma OSP5000L control, with Enomoto chip conveyer.
YAM CK-2A CNC Turning Center, 16" x 18", 8-position turret, 3-jaw chuck, live tailstock, 2" thru spindle, Fanuc 10T control, chip conveyer, approx. 2,337 hours, built 1988.
MORI SEIKI SL-25B CNC Turning Center, 20" x 24", 3-jaw chuck, 10-position turret, live tailstock, Yasnac control, 3" thru spindle, approx. 1,915 hours, built 1988.
MORI SEIKI SL-4C CNC Turning Center, 24" x 26", 3-jaw chuck, 10-position turret, live tailstock, Fanuc 10T control, 3-1/2" thru spindle, approx. 3,213 hours, built 1987.
MORI SEIKI SL-65 CNC Turning Center, 34" x 25", 3-jaw chuck, 12-position turret, no tailstock, Fanuc MF-T6 control, Mayfran Chiptote conveyer, Kitagawa 18", approx. 4,457 hours, built 1996.
SHIGIYA SEIKI MDL. GPA 27-60 PLAIN HYDRAULIC CYLINDRICAL GRINDER
MARPOSS E9
1988 YAM CK-2A CNC TURNING CENTER
LIVE TAILSTOCK
1988 MORI SEIKI SL-25B CNC TURNING CENTER
LIVE TAILSTOCK
OKUMA LB-15 CNC TURNING CENTER
LIVE TAILSTOCK
MORI SEIKI SL-65 CNC TURNING CENTER
1996
FORTUNE MDL. S2080 GAP STYLE ENGINE LATHE
4" THRU SPINDLE
VICTOR GAP STYLE ENGINE LATHE MDL. 1440 G
NEVER USED
VICTOR MDL. 1640G GAP STYLE ENGINE LATHE
2 AVAILABLE
LONG JEN MDL. CW6263C/1 GAP STYLE ENGINE LATHE
25" X 120"
1990
1992 4-AXIS MITSUI SEIKI HT-3A HORIZONTAL MACHINING CENTER
4-AXIS
MITSUI SEIKI HS3A HORIZONTAL MACHINING CENTER
4-AXIS 2 AVAILABLE
HITACHI SEIKI HC400 HORIZONTAL MACHINING CENTER
5-AXIS
1987 YAM MV-3A CNC VERTICAL MACHINE CENTER
3 AVAILABLE
HAAS YF-2YT VERTICAL MACHINING CENTER
UNDER 1,000 HRS.
4TH AXIS CAPABLE
2011
HAAS VF-8 CNC VERTICAL MACHINE CENTER
4TH AXIS CAPABLE1997
HITACHI SEIKI HC400 HORIZONTAL MACHINING CENTER
4-AXIS 2 AVAILABLE
VIEW OF NEW DRILL HEADS
REGISTER AT
4-Axis HITACHI SEIKI HC400 Horizontal Machining Center, Fanuc 11M control, twin 17-1/2" x 20" pallets, RPM spindle travel X=20.02", Y=18.01", Z=18.01", 50-position automatic tool changer, PT 40 taper, 1 degree 4th axis.
4-Axis HITACHI SEIKI HC400 Horizontal Machining Center, Fanuc 11M control, twin 17-1/2" x 20" pallets, RPM spindle travel X=20.02", Y=18.01", Z=18.01", 50-position automatic tool changer, PT 40 taper, 1 degree 4th axis.
LEADWELL MCV-0 CNC Vertical Machine Center Series L69015, Fanuc OMA control, S/N 4263, 14" x 25" table, machine vise, 16-position automatic tool changer, PT 40 taper, X=17" Y=13" Z=13", approx. 623 hours, built 1986.
YAM MV-3A CNC Vertical Machine Center, 17" x 35' table, 20-position automatic tool changer, PT 40 taper, Fanuc 10M control, approx. 7,979 hours, built 1987.
HAAS VF-8 CNC Vertical Machine Center, 36" x 64" table, 20-position automatic tool changer, PT 40 taper, Haas control, 4th axis capable, attachment sold separately, X=64" Y=40" Z=30", approx. 5,388 hours, built 1997.
YAM MV-3A CNC Vertical Machine Center, 16" x 72" table, 20-position automatic tool changer, PT 40 taper, Fanuc 10M control, 4th axis capable, attachment sold separately, approx. 8,067 hours, built 1987.
YAM MV-3A CNC Vertical Machine Center, 16" x 72" table, 20-position automatic tool changer, PT 40 taper, Fanuc 11M control, 4th axis capable, attachment sold separately, approx. 6,977 hours. built 1987.
4-Axis MITSUI SEIKI HT-3A Horizontal Machining Center, 60-position automatic tool changer, PT 40 taper, 12,000 RPM spindle, Fanuc 15M control, simultaneous 5th axis capable, attachment sold separately, twin 16" pallets, chip conveyer, X=21" Y=19" Z=19", approx. 3,777 hours, built 1992.
HAAS YF-2YT Vertical Machining Center, 20-position automatic tool changer, PT 40 taper, 18" x 36" table, X=30" Y=20" Z=30", 20 HP vector drive, Haas control, 4th axis, under 1,000 hours, built 2011.
4-Axis HITACHI SEIKI HC400 Horizontal Machining Center, 120-position automatic tool changer, PT 40 taper, 40-position CAT 50 pallet changer, Fanuc 15M control, X=20" Y=18" Z=20".
4-Axis MITSUI SEIKI HS3A Horizontal Machining Center, twin 16" x 16" pallet, Fanuc 15M control, 5th axis capable, attachment sold separately, 60-position automatic tool changer, PT 40 taper, X=21" Y=16" Z=19", chip conveyer, approx. 3,520 hours.
4-Axis MITSUI SEIKI HS3A Horizontal Machining Center, twin 16" x 16" pallet, Fanuc 11M control, 60-position automatic tool changer, PT 40 taper, X=21" Y=16" Z=19", chip conveyer, approx. 6,900 hours.
