Inside of rear body sheet metal Tailgate - Kaiser Willys · 65 1/2” MB/GPW 45 3/4” top of bow...
Transcript of Inside of rear body sheet metal Tailgate - Kaiser Willys · 65 1/2” MB/GPW 45 3/4” top of bow...
Inside of rear body sheet metal panel under body
Tailgate
On centerOn center
Front forward edge of horizontal wheel
Front square bow
Upper body edge
Rear round bow
body seam
detentsdetents
detents
25”
64 1/2” M38A166 1/2” CJ-2A, 3A, 3B, M3865 1/2” MB/GPW
45 3/4” top of bow to floor
8”24 1/4”
front
rear
hole for 3/8” rod
hole for 3/8” rod on backside
90° bracket w/hole
90° bracket w/hole
31 3/4” max to top of bow
57 1/2”
23 1/4”from top of w/s
2 1/4”
3”
hole for 3/8” rod
on backside
inside rear
no loop or holes for rear center tube
30 1/2”
31” on center
inside edge of body
body socket locations
32”
31”
hole
* these dimensions are i.d.
hole for 3/8” rod
center to center
31” is also center to center of bow sockets
loop
notch
notch notch
32 3/4”
notchnotch
looking from rear of Jeep
Rear of bracket
Windshield fastener
Original
Front edge of windshield 63.75” to 64” +- Rear edge of rear bow tubing
15°Questions?Call us Toll Free at:1-888-648-4923
Mon-Fri, 9AM-5PM ESTor email Mike Meditz at:[email protected]