Innovative Solutions in Material Test Equipment

2

The SH series combines a stylish design with maximum flexibility and high accuracy. Features:

High accuracy and high resolution. The SH series offers +0.5% FS accuracy, and high resolution. That is illustrated by the 50N device which indicates a minimum of 0.01N, which is 1/5000 resolution.

Peak hold Peak hold selection feature. Peak hold is cleaned automatically in

pre-selected time spans from 1 to 10 seconds Auto power off. For convenience of battery savings, the unit will

power off in a programmable time frame ranging from 1-60 minutes when the unit not in operation.

Programmable set points. Upper and lower limits can be set for go no-go applications. The unit has light and sound signals.

The unit has a 1 Hz data rate and calculates the average of memory data Unit readings. High versatility and convenience, the unit provides readings in

lbf. kgf. and Newton. The units are push-button selectable. An RS-232 series port in included for connection to a printer or computer. The

printer prints the following data: maximum value, minimum value, average value, desired value and undesired value

Specifications: Model SH-2 SH-5 SH-10 SH-20 SH-50 SH-100 SH-200 SH-500 Capacity 2N 5N 10N 20N 50N 100N 200N 500N Minimum load 0.001N 0.001N 0.005N 0.01N 0.01N 0.05N 0.1N 0.1N Sensor SENSOR INSIDE

Accuracy ±0.5%

Model SH-1k SH-2k SH-5k SH-10k SH-20k

SH-50k SH-100k SH-200k

SH-500k

SH-1000k

Capacity 1KN 2 KN 5 KN 10 KN 20 KN 50 KN 100 KN 200 KN 500 KN 1000 KN

Minimum load 0.5N 1N 1N 0.005KN

0.01KN 0.01KN 0.05KN 0.1KN 0.1KN 0.5KN

Sensor EXTERNAL SENSOR (“S” Type)

External Sensor (cylinder)

Accuracy ±0.5% ±1%

3

Drawing: The SH unit comes in a practical plastic case.

SH-F Series of Keystroke Force Gauges The SH-F series keystroke force gauge is a special force gauge for testing keystroke buttons, switches and more. The SPF keystroke test stand is especially designed to match SH-F series key technology has the patent parameter SPF keystroke test stand: Specifications:

⇒ Dimensions: 150 X 210 X 260mm ⇒ Capacity:100N stroke :25mm ⇒ Models with capacities of 2N, 10N, 20N and 100N.

Parameter: Model: 2H-2F SH-10F SH-20F SH-100F Capacity: 2N 10N 20N 100N Resolution: 0.001N 0.005N 0.01N 0.05N Accuracy: +- 0.5%

4

The SH unit comes in a practical plastic case. The SN series is an attractive line of push pull gauges with compact size and high accuracy. They are easy to operate and handy to carry out. A single click on a knob will convert the movement of the indication needle from the peak force (the needle stands still indicating peak force), to the real time indication (the needle moves in accordance with change of force). The devise is available in two of scales; Newton scale and kilogram scale. The SN series is available in capacities from 10N (1kgf) to 500N (50kgf). Features:

Ease of operation can be installed in a variety of test stands and fixtures. Peak hold function and real time readout. Multiple applications such as in electronics, wire, cable

harness, light textile, and mechanical applications. Specifications

Model SN-10 SN-20 SN-30 SN-50 SN-100 SN-200 SN-300 SN-500 Capacity 10N 20N 30N 50N 100N 200N 300N 500N Minimum load 0.05N 0.1N 0.2N 0.2N 0.5N 1.0N 2.0N 2.0N Accuracy ±1% . Specifications:

Model SKN-1 SKN-2 SKN-3 SKN-5 Capacity 1000N 2000N 3000N 5000N Minimum load 5N 10N 20N 25N Accuracy ±2%

5

XLW (M) Auto Tensile Tester Auto Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated films, flexible packaging materials, adhesives, adhesive tapes, pressure sensitive tape, rubber, paper, and so on. The test items include tensile, tensile resistance and elongation ratio test, peel strength, rate of deformation, hot seal strength, tearing strength, adhesives, puncture strength, open force, unwinding force at low speed, unplug force etc. Features:

LCD display of data, results and value. Changeable test range, easy to change Menu interface: Multi-function of setting printing,

researching, clear, plotting, serial port communication and so on.

Parameter stored permanently while power down and protection for over-load.

Self-return function. Standard units, free from manual intervention Analysis of group of specimens RS232 standard port, printer port Web transmission port supports data sharing between

LAN network as well as internet. Technical Specifications

Capacity: 100N 200N 500N Accuracy: ±1% of reading force Test speed: 50 100 150 200 250 300 500mm/min Test width: 0mm-30mm-50mm Stroke: 600mm Ambient condition: temperature: 10ºC~40ºC, humidity: 20%RH~70%RH Dimension: 450 mm(L) x 580mm(B) x 1100mm(H) Power: 110V/ 220V 50Hz/60Hz Net weight: 60kg (135 lb.) Standards: GB 13022, GB 8808, GB 1040, GB 4850, GB 7753, GB7754, GB 453�GB/T

17200, GB/T 16578, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, ASTM E4, ASTM D828, ASTM D882, ASTM 1938, ASTM D3330, ASTM F88, ASTM F904, ISO 37, JIS P8113, QB/T 2358, QB/T 1130.

Accessories: Standard: Mainframe, plane grips, software. Optional: standard roller, test panel, sampling cutter, floating roller clamp, unwinding tape grips, non-standard grips ink-jet printer.

6

XLW (B) Auto Tensile Tester

XLW(B) Auto Tensile Tester is applicable in the test of physical mechanical properties of plastic films, laminated films, adhesives, adhesive tapes, rubber, leather, paper and do on. The test items include tensile resistance, peel strength, rate of deformation, ripping strength, peel force, open force, etc.

Features:

Micro-computer controls, digital display Changeable test range , easy to change Displays maximum, minimum, and average data Ruler shows the results directly, and can obtain the data

of elongation and elongation rate, etc Automatic zero RS232 standard port, printer port Web transmission port supports data sharing between

LAN network as well as internet. Technical Specifications

Capacity: 200N (optional:30N, 50N, 100N) Accuracy: ±1% of reading force Test speed: 50 100 150 200 250 300 500mm/min Test width: 0mm-30mm-50mm Stroke: 600mm Dimensions: 450mm(L) x 580mm(B) x 1100mm(H) Power: 110V, 220V 50Hz/60Hz Net weight: 61kg Standards: GB 4850, GB 7754, GB 8808, GB 13022, GB 7753, GB/T 17200, GB/T

2790, GB/T 2791, GB/T 2792, GB/T 2358

Accessories Standard: Mainframe, software, plane grip Optional: Loadcell, mini-printer, communication cable, standard roller, test panel, sample cutter, unwinding roller grip, non-standard grips.

7

SLR Manual Wheel Test Stand The SLR test stand has a variety of applications, such as switch tests, insertion/withdrawing tests, and fracture tests. The motive carrier is designed with the test stand and can be moved on X-Y axis. The design is convenient to fix grips. Specifications: ⇒ Stable base, hand wheel overload and easy operation ⇒ Dimensions: 250x360x470 mm (L x W x H) ⇒ Capacity: 500N ⇒ Stroke: 180mm ⇒ Accommodates: SN, SH series force gauges, grips, digital scale. SLK / SLJ Manual Wheel Test Stands The SLK and SLJ manual wheel test stands are popular in every trade and scientific research organization for testing applications tension/compression tests, insertion/withdraw tests and fracture tests. Specifications:

⇒ T-screw transfer displacement for manual operation in vertical or horizontal use.

⇒ Dimensions: 160x240x460 mm (L x W x H) ⇒ Capacity: 500N ⇒ Stroke: 150mm ⇒ Accommodates: SN, SKN series force gauges, grips, digital scale.

SLJ-SN SLJ-SH SLS Peel Force Test Stand

Model is specially designed for testing cling force of copper-foil circuit on PC board and adhesive intensity of silver paper, aluminum foil and

SLK-SH

8

rubberized fabric. It uses a trapezoid form screw drive, holistic nut design with a 45 degree lift between the plane and level, which makes sure the object moves while it is tested. Specifications:

Dimension: 350x210x460 mm (L x W x H) Capacity: 500N; Stroke: 150mm Accommodates: SN, SH series push pull force gauges, with various clamps.

SPJ Manual Test Stands This series of test stands features a gear drive manual operation for easy of use and rapid load applications. Its simplicity makes it ideal for batch tests. Specifications:

Dimension:240x150x400 mm L x W x H Capacity: 500N Stroke:70mm Accommodates: SN, SH series push pull gauges, clamps.

SPH Horizontal Manual Test Stands This series of test stands features a gear drive manual operation for easy of use and rapid load applications and offers the advantage of horizontal operation.

Specifications:

Dimension:450x150x160 mm L x W x H Capacity: 500N Stroke:50mm Accommodates:

SN, SH series push pull gauges, clamps.

SJH-500 Series of Horizontal Motorized Test Stands The SJH-500 series of horizontal motorized test stands operate with force gauges in the range of 2 to 500N. The stands have a double leader design for added stability and reliability. The units have a timing switch as well as manual and automatic control switch functions.

SPH-SH SPH-SN

9

Specifications:

⇒ Dimensions: 570 X200X330 mm (LxWxH)

⇒ Capacity 500N ⇒ Stroke 250 mm ⇒ Accommodates: SN, SH series push

pull gauges, clamps SJV-5K and 10K Series of Motorized Test Stands

The SJV series are motorized vertical test stands which are used in tension and compression tests. The SJV series comes in three versions to accommodate SKN series analogue pull push gauges and SH series digital pull push gauge with different adapters and with internal or external sensor. The stand features a dual column design which affords high stability and reliable force application and measurement. The SJV stand features variable speed control, and jog buttons to position the crosshead for test initiation. Specifications:

Speed range: 30 – 230 mm/min Speed accuracy: 0.5 % Vertical travel: 200 mm Clearance between columns: 250 mm Capacity: 5-10KN

SPV Manual Hydraulic Test Stands The SPV test stands can be used in conjunction with the series SH force gauges. The test stands use a hydraulic jack to apply force, and have a design that allows forces to be applied in tension or compression. Specifications:

Capacity: 50KN to 200KN with SH series force gauge. Stroke: 150 mm Dimensions: 260 X 470 X 1290 mm (LxWxH)

10

SOV Test Stand Characteristic:

⇒ Large Travel ⇒ Cycle Testing With Counter ⇒ Measure in Constant Speed and Nonpolar ⇒ Ruler for displacement measurement.

Specification: Test Range: 2000N Measuring Stroke: 800mm Measuring Speed: 20-500mm/min Working Voltage: Single-Phase 220V Rate Flow: 1.5A Fuse of Main Circuit: 0.5A Working Temperature: 20 ±10°C Store & Delivery Temperature: -27°C ~ +70°C Relative Humidity: 15% ~ 80% RH

SRT Torque Driver

Features:

o Universal Slap o Bidirectional Operation o Torque Value can be pre-set

Specifications Model SRT-1 SRT-3 SRT-6 SRT-10 SRT-12 Range/N.m 0.2 ~1.2 0.5~3 1~6 4~10 5~12 Min Dail/N.m 0.01 0.05 0.1 0.2 0.2 Accuracy (<) ± 5% ± 5% ± 5% ± 5% ± 5%

Total length (mm) 120 140 150 Handle Department (mm) 22 30.7 33

Dimension

Joint Size 6.4 (hexangular) Adapt with the fastener for reference. M3 M4 M5 M6 M8

11

SBJ Fastener Pull Test stand SBJ Fastener Pull Test stand apply with SN.SII series force gauge and special grips, is specially used to measure the bottom of the ready-made clothes and the purpose of the test is to define the responsibility of the ready-made clothes manufactures to make sure that the buttons and fixed decorative pieces are properly fixed on the clothes, this way preventing the buttons from falling. Push Pull Force Gauge and various clamps are optional. Special clamps

12

SD Series of Digital Spring Tester is specially R & D instruments, which is widely used in measuring load & distortion. It is adapted in test tensile and compressive spring, stretch components and also can be applied in the test of plastic reed. Specifications:

⇒ Peak hold function Catch and hold the peak value in test.

⇒ Peak hold and auto-release function Catch the peak value and show it on display, keeping the value for 1-10 seconds, then release the value and ready for the next peak.

⇒ Automatic power off The SH Series have automatic power off function to save battery and keep the gauge Safe. The Power off timer can be set to 1-60 minutes.

⇒ Compare function Initial input of the tolerance limit (max/min) enables the device to judge the measured result as GO(green pilot lamp)/NG(red pilot lamp)

⇒ Calculate the average function Memory 10 groups of data, and calculate the average.

⇒ Three units lbg, kgp, and Newton units are push-button selectable.

⇒ RS-232C output The RS-232 output, offer the communication connector.

⇒ Printer inside Print 10 groups of data conserved in the test and the max value, the min value, the average value, the eligible value, the incompetent value.

SD-50~500 SD-1000~5000 Parameter:

Model: SD-10 SD-20 SD-50 SD-100 SD-200 SD-500 SD-1000 SD-2000 SD-5000 Max working load: 10N 20N 50N 100N 200N 500N 1000N 2000N 5000N Load resolution ep: .001N .002N 0.01N 0.02N 0.05N 0.1N 0.2N 0.5N 1N Test Travel: 70mm 70mm 100mm 100mm 100mm 100mm 150mm 150mm 150mm Distortion resolution eh:

0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm 0.01mm

Platen Diameter: 34mm 34mm 49mm 49mm 49mm 49mm 108mm 108mm 108mm Max free test table length:

70mm 70mm 150mm 150mm 150mm 150mm 200mm 200mm 200mm

Accuracy: +/- 1%

13

SJJ-01 Indenters for foam, sponge, etc. 500N

SJJ-02 Ring for springs, thread, etc. 500N

SJJ-03 Screw grip for wire, paper, etc. 500N

SJJ-04 Compression plates 5000N

SJJ-05 Webbing grip for textile, Leather, rubber, etc 500N

SJJ-06 Capstan grip for wire, thread, etc 500N

SJJ-07 Screw grip for small components 50N

SJJ-08 Screw grip for wire, cable, etc 500N

SJJ-09 Joint devise 5000N

SJJ-10 Grip for sponge, brush, etc 500N

SJJ-11 Grip for wire and General components. 5000N

SJJ-12 Screw clamp 500N

SJJ-13 Screw clamp 5000N

SJJ-14 Wide grip 5000N

SJJ15 Wide screw grip 5000N

SJJ-16B Spring grip 5000N

SJJ-31

SJJ-36

SJJ-99

SJJ-100 Wedge grips 5000

14

The ST-B series of Cap Torque Tester is an intelligent measuring instrument designed for detecting and calibrating the torque torsion and closure of various types of caps used by closure manufacturers, bottlers, food and beverage companies, and for other applications. The cap torque tester has clamps that provide positive gripping action for a variety bottles, jars and containers. The maximum clamp diameter is 200 mm and installation is fast and easy. The ST-B series of Cap Torque Tester include a convenient built-in printer and an RS-232C port to transmit data to a computer for analysis, storage and print-out. Features:

High Accuracy, High Resolution Automatic alarm Compared Function Peak Hold and Auto-release Function Memory 10 Values, Calculates the Average Value Function Provides readings in: Ncm, kgfmm, lbf.in Outputs: RS-232, Digimatic analog

Models and Capacities

Model ST-1B ST-2B ST-5B ST-10B ST-20B

Capacity 1N.m 2N.m 5N.m 10N.m 20N.m

Minimum load 0.0005N.m 0.001N.m 0.002N.m 0.005N.m 0.01N.m

Accuracy ±0.5%

15

The ST series of digital torque gauges are intelligent instruments designed for various torque testing and measuring applications. The units are used for calibrating electric screwdrivers and wrenches with torque control to measure relative torque testing and torsion fracture parts testing. The units are used in the electric industry, hand tool industry and in research laboratories. Features and Specifications:

Peak hold function Automatic power off Go No-go function allows initial input of tolerance limits (minimum,

maximum), and displays green light for parts within tolerance and red light for parts out of tolerance.

Memory for 10 measurements with average calculation function. Unit conversion, converts from N/m to Kgf/cm, lbf, automatically. RS 232 port for connection to printer or computer. Has software for data acquisition. ST 50-500 has printer on system

ST-50-500 Models and Capacities Model: ST-1 ST-2 ST-5 ST-10 ST-20 ST-50 ST-100 ST-200 ST-500 Torque capacity:

1N,m 2N,m 5N,m 10N,m 20N,m 50N,m 100N,m 100N,m 500N,m

Resolution: 0.005N,m 0.001N,m 0.002N,m 0.005N,m 0.01N,m 0.02N.m 0.05N,m 0.1N,m 0.2N,m Accuracy: +-0.5% +-1%

Applications

Torque test on mobile phone

Torque test on torque spring

Dynamic frictional torque of connector

Torque test of electric screwdriver

16

SDT Series Spring Torque Tester SDT series is a special machine to test various form of torsion spring, scrollwork reed and other elastic objects. Being accurate and ocular for reading, the torsion and angle are displayed in a digital display. Also the torsion sensor deformation and twisting angle have automatic compensation function. Features:

⇒ 320 x 240 picture element Liquid Crystal Display (LCD) ⇒ Peak holding and auto-releasing function

Catching and holding the peak value, showing it on display for (1-99 seconds), then releasing the value and being ready for the next peak

⇒ Automatic power off function This function saves battery and keeps the gauge safe; also the power off timer (1-99 minutes) can be set by the user.

⇒ Comparing function Initial input of the tolerance limit (Max/Min) enables the device to judge the measured result as Good (Green pilot lamp)/ No-Good (Red pilot lamp)

⇒ Units conversion Conversion in three units (N/m, kgf/cm, ibf/in) automatically

⇒ Inside Printer Printing test curve and analysis report of 10 groups of tested data

⇒ RS-232C Output RS-232C output connects outer equipment and can use the related CD for transmitting the tested data to a computer for relevant treatment

Parameter

Model: SDT-0.2 SDT-0.5 SDT-1 SDT-2 SDT-5 SDT-10 STD-20 SDT-50 Capacity: 200N.mm 500N.mm 1000N.mm 2000N.mm 5000N.mm 10N.mm 20N.mm 50N.mm Resolution: 0.02N.mm 0.05N.mm 0.1N.mm 0.2N.mm 0.5N.mm 0.001N.mm 0.002N.mm 0.005N.mm Test Range of Angle: 0~-9999.9° Angle resolution: 0.1° Loading mode: Handing Specimen Rotary Diameter:

100 mm

Specimen Length: 150 mm Out-size: L 690 * W 390 * H 320 (mm) Power: 220 ┴ 10%V 100W Accuracy: ± 1%

Headquarters PHYSICAL TEST SOLUTIONS 11952 Lindblade St. Culver City, CA. 90230 Tel: (310) 736-1901 info@physicaltestsolutions.com www.physicaltestsolutions.com/

USA Assurance Tech, Chicago Telephone: (630) 550-5000 kenn@atiqualit+y.com Deterco Inc. Houston Tel: (800) 943-3812 sales@deterco.com Physical Testing Equipment Services, Johnston, RI Tel: (401) 944-4760 info@physicaltestingequipsv.com Measure-All, Inc., Ohio Tel: 1-800-758-2376 sales@measure-all.com México Cientec, Guadalajara. Tel : (33)3817-0140 ventas@cientec.com.mx Equiser, Puebla Tel: (222) 244 446 5349 victor@equiser.com.mx Mess - Queretaro Tel. (442) 196 49 38 ventas@mess.com.mx GRC Equipos y servicios, Cd. De México. Tel : (55) 5894-2955 grcm01@prodigy.net.mx Hemi Tel: 570-24-34/ 5370-25-16/ 5370-16-73 rrr@hemi.com.mx Medinor Te: (662) 251-0126 ycarrillo@medinor.com.mx Rosdi, s.a. de c.v. Tel: 914 279 5868 rosdi@prodigy.net.mx Metrología y Pruebas Tel: (631) 314-6263 ericaud@mypsa.com.mx TMS Tools and Metal Supply de Mexico Tel: 011-52-664-6270474 eleon@toolsandmetals.com Canada M&L Testing Equipment Dundas, Ontario L9H 7H8 Tel: (905) 689-7327 e-mail: info@mltest.com

Latin America Argentina Mess s.a. Tel. / Fax: (5411) 4334-8592 rcsalazar@messmedicion.com.ar www.messmedicion.com.ar/ Brazil dpUNION Tel: 55 11 5079-8411 aribeiro@dpunion.com.br www.dpunion.com.br Bolivia Reguimport - Lab Tel. +591 22 456 215 gmalleac@entelnet.bo Colombia Indutecsa Colombiana Tel: (571) 6101182 www.indutecsa.com Chile Arquimed S.A. Tel: (56-2) 6346266 jortiz@arquimed.cl Peru DIECOM Tel: 51-12222717 jbustamante@diecomforestry.com Venezuela Proyectos Produtec C.A. Tel: 58 212 761 61 15 lcorredor@cantv.net Costa Rica Suinsa S.A. Tel:(506)8330-1536 edwar.suinsa@gmail.com Middle East Egypt Scientific Trading Co. Tel: : 202-2670-3806 galal_nough@nouh.com.eg Saudi Arabia Saudi Technology & Equipment Company (SATECH) Tel: +96614502928 abbas@satech-co.com

Dubai BDH MIDDLE EAST LLC Tel: 971 4 2852211 sanjay@bdhme.com Jordan Elshaktori Trading Establishment Tel: 962-6-5651057 elshak@nets.com.jo Europe Italy ATS FAAR SpA Tel: +39-2-2699851 atsfaar@atsfaar.it

England A.J.T. Equipment Limited Tel: +44 (0) 1384 482 848 admin@ajtequipment.co.uk France Sodexim Tel: 33-(0) 326-0291-11 sodexim@sodexim.org

Greece M.I Priniotakis S.A. 30-210-7227719 ikafegidakis@priniotakis.gr

Israel Fisher Intl Ltd Tel: 972-8-934 8455 fisherma@inter.net.il Poland COMEF Aparatura Naukowo-Badawcza Tel:+48 32 203 41 49 grzegorz@comef.com.pl Estonia Laboritugi OÜ Tel: 3725249849 laboritugi@laboritugi.ee Romania SC RedoxLab SRL Tel. 004-0264-416427 glodan.mihai@redox.com.ro Asia China Earth Products China Ltd. Tel: 852-39654890 carmenli@epc.com.hk India Unitestmac Systems Ltd. Tel:91-11-25894580 / 25894782 sales@unitestmac.com South Korea Dynatek Tel: 02-598-6112 jhkim@dynatek.co.kr

Malaysia Dutech Scientific (M) Sdn. Bhd. Tel: 6 03-7956 7861 pau@dutechscientific.com

Vietnam Top Technology JSC Tel: 84 8 2842405 t-tech@viettel.vn

Indonesia CV Trimitra Tehnik Tel (62) 21-591-3967 cv_trimitra@yahoo.com Nigeria MD-Mudiame 234-084481305 www.mudiame.com