INNOVATIVE BUILDING SOLUTIONS - Maccaferri Geocomposite for planar drainage formed of extruded...
Transcript of INNOVATIVE BUILDING SOLUTIONS - Maccaferri Geocomposite for planar drainage formed of extruded...
Waterproofing 4
Roofing Underlayer Solutions 3
Thermoacoustic Insulation 2
Drainage and Protection 1
Geotechnology 5
Cont
ents
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Drainage and ProtectionTERRADRAIN WGeocomposite for planar drainage with parallel channel coreTERRADRAIN MGeocomposite for planar drainage with cuspated coreTWINDRAINGeocomposite for planar drainage with geotextile pocketGNT PET-ANonwoven geotextiles manufactured with polyester fibers assembled by needlepunching technologyMACTEX W1Polypropylene woven geotextile ECODRAINHDPE studded membranePAVITER 8GREENModular system made of HDPE for stabilising external surfaces
1
Roofing Underlayer SolutionsITALVENTBreathable polypropylene membrane ITALVAPMembrane for vapour control
3
Thermoacoustic InsulationTERMOSINTThermoacoustic insulation made of polyester fiberTERMONATThermoacoustic insulating made of natural fiber EDILFOAMExtruded polystyrene insulation boardsSAGLANThermoacoustic insulating roll made of glass woolSAGLAN LThermoacoustic panel made of glass wool
2
WaterproofingMANTOBENTBentonite geocomposite ITALFOILWaterproof membrane made of reinforced PEMEMBRANA ECOLOGICA NERALDPE waterproof membrane
4
GeotechnologyITALGRIMP3-D anti-erosion geomat made of PPITALMANT - ITALMANT NETAnti-erosion Biomat/Bionet made of natural fibers
5
Prod
uct l
ist
Dra
inag
e an
d Pr
otec
tion
1Drainage and Protection
Civil engineeringIndustrial building
Infrastructure worksExternal surfaces
Geocomposite for planar drainage formed of extruded polypropylene monofilaments in a cuspated structure, thermally coupled on one/both side to polypropylene geotextiles or with one geotextile and a laminated fabric with a barrier function.
TERRADRAIN MGeocomposite for planar drainage with cuspated core
Advantages√ High drainage capacity compared to
traditional systems√ Simple and rapid installation, saving
natural resources and costs
Options and typesThe product is available in widths of 2.0 and 4.2 m.
Dra
inag
e an
d Pr
otec
tion
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsGeocomposite for planar drainage formed of extruded polypropylene monofilaments heat-welded to one another at contact points forming a three dimensional matrix with a symmetric and cuspated structure, thermally coupled to(3 different versions):
a. two filtering nonwoven geotextiles (range Terradrain M1..1) b. one filtering nonwoven geotextile (range Terradrain M1..0) c. one filtering nonwoven geotextile and one polymeric reinforced membrane (range Terradrain M1..M).
The geocomposite will have the following characteristics:• Thickness at 2 kPa equal to ... mm• Tensile strength MD/CD equal to .../... kN/m• In-plane flow capacity of... l/m.s (vertical under 20 kPa load) ... l/m.s (vertical under 100 kPa load)
Main applications Civil engineeringIndustrial buildingInfrastructure and geotechnical works
* MD=machine direction; CD=cross directionProduct to be covered within 14 days of the installation.Expected minimum duration of 25 years on natural terrains with 4<pH<9 and temperatures <25°C.Drainage capacity obtained with soft/stiff contacts.Horizontal drainage capacity corresponds to a gradient i=0.03Vertical drainage capacity corresponds to a gradient i=1.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
TERRADRAIN MGeocomposite for planar drainage with cuspated core
Properties Test Unit Values
version a b c
type M1121 M1181 M1201 M1120 M1200 M120M
mass per unit area EN 9864 g/m2 810 760 900 670 770 980
thickness at 2 kPa EN 9863-1 mm 14 18 20 14 20 20
tensile strength MD/CD* EN ISO 10319 kN/m 15 15 15 8 8 21
horizontal draining capacity; load 20 kPa EN ISO 12958 l/m.s 0,38 0,60 0,70 0,40 0,90 0,70
horizontal draining capacity; load 100 kPa EN ISO 12958 l/m.s 0,03 0,03 0,07 - 0,05 0,08
vertical draining capacity; load 20 kPa EN ISO 12958 l/m.s 2,80 4,40 5,20 3,00 6,30 5,20
vertical draining capacity; load 100 kPa EN ISO 12958 l/m.s 0,30 0,30 0,80 - 0,40 0,90
Standard size Unit Values
version a b c
type M1121 M1181 M1201 M1120 M1200 M120M
role length m 35 28 28 35 28 28
role width m 2,0/4,2
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
e an
d Pr
otec
tion
Geocomposite of extruded polypropylene monofilaments in a 3-D matrix with parallel longitudinal channels, thermally coupled on one/both side to polypropylene geotextiles or with one geotextile and one laminated fabric to provide a barrier function.
TERRADRAIN WGeocomposite for planar drainage with parallel channel core
Advantages√ High drainage capacity compared to
traditional systems√ Reliable performance even under high
loads√ Simple and rapid to install, saving
natural resources and costs
Options and typesThe product is available in nominal widths of 2.0 and 4.2 m.
Dra
inag
e an
d Pr
otec
tion
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
Main applicationsCivil engineeringIndustrial buildingInfrastructure and geotechnical works
* MD=machine direction; CD=cross directionProduct to be covered within 14 days of the installation.Expected minimum duration of 25 years on natural terrains with 4<pH<9 and temperatures <25°C.Drainage capacity obtained with soft/stiff contacts.Horizontal drainage capacity corresponds to a gradient i=0.03Vertical drainage capacity corresponds to a gradient i=1.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
TERRADRAIN WGeocomposite for planar drainage with parallel channel core
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
e an
d Pr
otec
tion
SpecificationsGeocomposite for planar drainage consisting of extruded polypropylene monofilaments heat-welded to each other at contact points forming a three-dimensional matrix with parallel longitudinal channels, thermally coupled to (3 different versions):
a. two filtering nonwoven geotextiles (range Terradrain W1..1) b. one filtering nonwoven geotextile (range Terradrain W1..0)c. with one filtering nonwoven geotextile and with one polymeric reinforced membrane (range Terradrain W1..M).
The geocomposite will have the following characteristics:• Thickness at 2 kPa equal to ... mm• Tensile strength MD/CD equal to .../... kN/m• In-plane flow capacity of ... l/m.s (vertical and under 20 kPa load) and ... l/m.s (vertical and under 100 kPa load)
Properties Test Unit Values
version a b c
type W1041 W1051 W1081 W1060 W1080 W108M
mass per unit area EN 9864 g/m2 530 600 850 540 770 930
thickness at 2 kPa EN 9863-1 mm 4,20 5,10 8,00 6,90 7,90 8,0
tensile strength MD/CD* EN ISO 10319 kN/m 18 18 18 8 8 21
horizontal draining capacity; load 20 kPa EN ISO 12958 l/m.s 0,10 0.15 0.37 0,37 0,45 0.42
horizontal draining capacity; load 100 kPa EN ISO 12958 l/m.s 0,06 0,10 0,24 - 0,28 0,24
vertical draining capacity; load 20 kPa EN ISO 12958 l/m.s 0,70 1,10 2,60 2,60 3,20 3,00
vertical draining capacity; load 100 kPa EN ISO 12958 l/m.s 0,50 0,90 1,70 - 2,00 1,70
Standard size Unit Values
version a b c
type W1041 W1051 W1081 W1060 W1080 W108M
role length m 125 100 55 50/75 55 55
role width m 2,1/4,3 2,1/4,3 2,0/4,15 2,0/4,2 2,0/4,15 2,0/4,15
Geocomposite for planar drainage made of a 100% polypropylene heat welded extruded monofilament core connected to two nonwoven geotextiles, and featuring a geotextile pocket suitable for a drainage collection pipe.
TWINDRAINGeocomposite for planar drainage with geotextile pocket
Advantages√ Highdrainagecapacitycomparedto
traditionalsystems√ Simpleandrapid installation;saves
natural resources, saving costs andincreasingjobsitesafety
OptionsandtypesThe product is available in heights of 1 or 2 m.
Dra
inag
ean
dPr
otec
tion
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsGeocomposite for planar drainage made of a polyproylene heat-welded extruded monofilament core, connected to two nonwoven polypropylene geotextiles. The overall thickness, measured under a load of 2 kPa, will be ... mm.A pocket is provided suitable for receiving a perforated drainage pipe. The interior of the pocket will have a geotextile filter to ease the insertion of the pipe and a preinserted string to pull a pipe through the pocket. Tensile strength MD/CD of the composite will be .../... kN/m.Flow capacity in the plane of the geocomposite, with hydraulic gradient i = 1 and under 20 kPa will be equal to ... l/m.s.
MainapplicationsCivil and industrial engineeringFarming & agricultureInfrastructure and geotechnical works
* MD=machine direction; CD=cross directionProduct to be covered within 14 days of installation.Expected minimum durability of 25 years in natural terrains with 4<pH<9 and temperatures <25°C.Drainage capacity obtained with soft/soft contact.Vertical drainage capacity corresponds to gradient i=1.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
TWINDRAINGeocomposite for planar drainage with geotextile pocket
Properties Test Unit Values
type G100 G200
mass per unit area EN 9864 g/m2 800 910
thickness at 2 kPa EN 9863-1 mm 12 15
tensile strength MD/CD* EN ISO 10319 kN/m 18/17 19/18
max pipe diameter mm 200 280
vertical drainage capacity; load 20 kPa EN ISO 12958 l/m.s 1,5 2,5
Standardsize Unit Values
type G100 G200
roll length m 25
roll width m 1 2
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
ean
dPr
otec
tion
Nonwoven geotextiles made of polyester (PET) fibers, for filtration-separation- drainage and protection. Usefull for a very wide range of application from general building up to infrastructural and geo-technical works.
GNTPET-ANonwoven geotextiles manufactured with polyester fibers assembled by needlepunching technology
Advantages√ Wide range of grammature and
performaces√ Wideapplicationrange√ Easytoinstall
OptionsandtypesAvailability of 7 different grammatures with costumized roll’s size .
Dra
inag
ean
dPr
otec
tion
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsNonwoven geotextile made from polypropylene with the min.following data:• Mass per unit … g/m2 according EN ISO 9864• Tensile Strength MD ..... . kN/m According ENISO 10319• Tensile Strength CD ..... . kN/m According ENISO 10319• Flow pependicualr to the plane: ... l/m2s According EN ISO 11058
MainapplicationsCivil engineeringIndustrial buildingInfrastructure and geotechnical works
* MD= machine direction; CD=cross directionProduct to be covered within a month of installation.Expected minimum durability for 25 years in natural terrains with 4<pH<9 and temperatures <25°C.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
GNTPET-ANonwoven geotextiles manufactured with polyester fibers assembled by needlepunching technology
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
ean
dPr
otec
tion
Properties Test Unit Values
mass per unit area EN ISO 9864 g/m2 150 200 300 400 500 600 800
thickness at 2 kPa EN ISO 9863-1 mm 1,0 1,5 2,5 3,0 3,5 4,4 5,0
tensile strength MD* EN ISO 10319 kN/m 0,7 2,0 3,0 4,0 5,5 6,0 9,5
tensile strength CD* EN ISO 10319 kN/m 0,9 2,5 3,5 4,5 6,0 7,0 10,5
static puncture resistance EN ISO 12236 N 140 400 600 800 1000 1300 2000
dynamic perforation resistance EN ISO 13433 mm 45 25 18 13 7 6 3
flow perpendicular to the plane EN ISO 11058 l/m2s 130 130 100 60 60 35 20
characteristic aperture O90 EN ISO 12956 micron 130 130 90 80 80 55 35
Standardsize Unit Values
mass per unit area g/m2 150 200 300 400 500 600 800
roll width m 2/3 (up to 6)
roll lenght m 50/100
Woven geotextile made from polypropylene straps in two orthogonal directions. It provides filtration and separation functionality as well as stabilisation and load spreading.
MACTEXW1Polypropylene woven geotextile
Advantages√ Widerangeoftypesandyields√ Strengtheningfunctiondespite low
mass√ Lightandeasytoinstall
OptionsandtypesAvailable in up to 6 strengths
Dra
inag
ean
dPr
otec
tion
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsWoven geotextile made from polypropylene straps in two orthogonal directions. Tensile strength, measured according to the EN ISO 10319, will not be lower than:• ... kN/m in the longitudinal direction with elongation not greater than ...%• ... kN/m in the transversal direction with elongation not greater than...%The diameter of the hole caused by the cone drop test in accordance with EN ISO 13433 norm will not be greater than ... mm. The equivalent opening size O90 will be ... micron.
MainapplicationsCivil engineeringIndustrial buildingInfrastructure and geotechnical works
* MD= machine direction; CD=cross directionProduct to be covered within a month of installation.Expected minimum durability for 25 years in natural terrains with 4<pH<9 and temperatures <25°C.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
MACTEXW1Polypropylene woven geotextile
Properties Test Unit Values
type 2S 4S 5S 6S 8S 10S
tensile strength MD* EN ISO 10319 kN/m 25 40 50 60 80 100
tensile strength CD* EN ISO 10319 kN/m 25 40 50 60 80 100
deformation at maximum load MD* EN ISO 10319 % 17 17 15 14 13 13
deformation at maximum load CD* EN ISO 10319 % 9 9 9 9 9 9
static puncture resistance EN ISO 12236 kN 3,0 5,0 5,0 8,0 8,0 12,0
dynamic perforation resistance EN ISO 13433 mm 13,0 8,0 8,0 8,0 9,0 5,0
flow perpendicular to the plane EN ISO 11058 m/s 0,020 0,010 0,020 0,020 0,010 0,030
characteristic aperture O90 EN ISO 12956 micron 300 200 300 250 200 200
Standardsize Unit Values
type 2S 4S 5S 6S 8S 10S
roll width m 5,2
roll length m 100
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
ean
dPr
otec
tion
Heat-treated HDPE cuspated membrane with asymmetrically formed truncated cones, suitable for the function of protecting underground structures.
ECODRAINHDPE studded membrane
Advantages√ Extremelyflexibleandlight√ Structureoverlaps,guaranteeingjoint
continuity
OptionsandtypesAvailable in 2 thicknesses (8 and 20 mm), and also:Ecodrain 8 also available coupled to a nonwoven geotextile (Ecodrain 8F);Ecodrain 20 also available in a perforated version (Ecodrain 20W).
Dra
inag
ean
dPr
otec
tion
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsHigh density polypropylene studded membrane, with mass per unit area of … g/m2 and overall thickness of … mm, with compression strength of … kN/m2 and tensile strength MD/CD equal to …/… kN/m with relative deformations of …/… %.
MainapplicationsCivil engineeringIndustrial building
* MD= machine direction; CD=cross directionProduct to be covered within 14 days of installation.Expected minimum durability of 5 years in natural terrains with 4<pH<9 and temperatures <25°C.Draining capacity tested with soft/stiff contacts.Horizontal drainage capacity matches gradient i=0.04; vertical drainage matches gradient i=1.Ecodrain8alsoavailableinversioncoupledwithnonwovengeotextilewithmassperunitarea100g/m2(Ecodrain8F).Ecodrain20alsoavailableinperforatedversion(Ecodrain20W).
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ECODRAINHDPE studded membrane
Properties Test Unit Values
type 8 20
mass per unit area EN 9864 g/m2 500 1000
thickness at 2 kPa EN 9863-1 mm 7,5 20
thickness of the sheet mm 0,55 1,00
tensile strength MD/CD* EN ISO 10319 kN/m 5/5 9/10
elongation at break point MD/CD* EN ISO 10319 % 20/25 20/20
compression strength ISO 25619-2 kN/m2 200 150
horizontal drainage capacity; load 20 kPa EN ISO 12958 l/m.s 0,30 2,50
vertical drainage capacity; load 20 kPa EN ISO 12958 l/m.s 1,90 10,00
Standardsize Unit Values
type 8 20
roll length m 20
roll width m 2/2,4 2/4
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
ean
dPr
otec
tion
Ecocompatible cellular containment system made of recycled HDPE, consisting of panels connected to one another via interconnecting joints, filled with gravel or soil on-site to encourage vegetation growth.Enhanced performance when installed withgeocompositeTerradrainW1051.
PAVITER8GREENModular system made of HDPE for stabilising external surfaces
Advantages√ Excellentsupportofgrassareas√ Excellentresistancetohighloads√ Easytoinstall
OptionsandtypesProduct supplied in green 50 x 50 cm panels.
Dra
inag
ean
dPr
otec
tion
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsEcocompatible cellular containment system made of HDPE, consisting of panels connected to one another via interconnecting joints, filled with gravel or soil on-site to encourage vegetation growth, having the following characteristics: • Colour: Green • Panel weight (kg): 5• Weight per m2 (kg) : 20• Compression strength: > 375 kN/piece at 20°C (150 ton/m2)
MainapplicationsExternal surfaces/pavementsVehicle parking areas
Product UV stabilised.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
PAVITER8GREENModular system made of HDPE for stabilising external surfaces
Properties Test Unit Values
module weight kg 5
net module surface cm 48 x 48
gross module surface cm 50 x 50
cell height cm 4,0
foot height cm 3,5
compression strength kN/piece > 375
Standardsize Unit Value
pallet n° pieces 240 (60 m2)
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Dra
inag
ean
dPr
otec
tion
Ther
moa
cous
tic
Insu
lati
on
Thermoacoustic Insulation
Roof insulationWall insulation
Floor or ceiling insulation
2
Thermal and acoustic insulation, made of polyester fiber, totally atoxic and recyclable, rot-proof and resistant to fungus/mold, bacteria, and to most acids, salts and hydrocarbons. Suitable for roof and wall insulation.
TERMOSINTThermoacoustic insulation made of polyester fiber
Advantages√ Atoxic,recyclable,rot-proof,chemical
inert, resistant to molds and micro-organisms
√ Excellentairbornesoundinsulation√ Largerangeofformats,densitiesand
thicknesses
OptionsandtypesProduct available in roll or panel of various formats, densities and thicknesses and with the possibility of customized formats.
Ther
moa
cous
tic
Insu
lati
on
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
THERMOACOUSTICINSULATION
SpecificationsPanel or roll made of polyester fiber for thermal and acoustic insulation, totally atoxic and recyclable, having a thermic conductivity of … W/mK relatively to the density ... kg/m3.
MainapplicationsRoof insulationWall insulation
Roll also available with density of 20 kg/m3.Possibility to have customized formats.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
TERMOSINTThermoacoustic insulation made of polyester fiber
Properties Test Unit Values
density kg/m3 30 40 50
thermal conductivity value (thickness 30) UNI EN 12667 W/mK 0,0420 0,0367 0,0346
temperature range of use °C from -40 to + 110
class of reaction to fire EN 13501-1 E
aiborne sound insulation (thickness 60, density 30) ISO 717-1 dB 54
standard color white/green
Standardsize Unit Values
density kg/m3 30 40 50
panel thicknesses available mm 20/30 30/40 30/40/50/60/70
roll thicknesses available mm 20/30 - -
roll width cm 60/120/140/180/200/240
roll length m 10/12/15/20/30/35
panel width cm 60
panel length cm 120/140/160
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Ther
moa
cous
tic
Insu
lati
on
Thermal and acoustic insulation made of natural fiber, of kenaf or hemp, totally recyclable. Suitable for roof and wall insulation.
TERMONATThermoacoustic insulation made of natural fiber
Advantages√ Totallyrecyclablemadeofnaturalfibers√ Excellentairbornesoundinsulation√ Largerangeofformats,densitiesand
thicknesses
OptionsandtypesProduct available in rolls or panels of various formats, densities and thicknesses and with the option of having customized formats.
Ther
moa
cous
tic
Insu
lati
on
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
THERMOACOUSTICINSULATION
SpecificationsPanel or roll made of natural fiber for thermal and acoustic insulation, totally recyclable, having a thermal conductivity up to 0,033 W/mK.
MainapplicationsRoof insulationWall insulation
Rolls and panels also available in customized formats.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
TERMONATThermoacoustic insulation made of natural fiber
Properties Test Unit Values
density kg/m3 from20upto100
composition 85% kenaf (or hemp) - 15% polyester
thermal conductivity UNI EN 12667 W/mK up to 0,033
heat capacity kJ/kgK 1,7
class of reaction to fire EN 13501-1 E
airborne sound insulation ISO 717-1 dB up to 57
vapour permeability UNI EN 12026 from 1,5 up to 2,05
Standardsize Unit Values
density kg/m3 from20upto100
available thicknesses panel/roll mm from 5 up to 100
roll width cm 60/100
roll length m 10/12/15/20/30/35
panel width cm 60
panel length cm 120
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Ther
moa
cous
tic
Insu
lati
on
Thermal insulation made of extruded polystyrene with extrusion skin, with straight or ledged edges. Suitable for insulation of upside-down flat roof, both walkable and non-walkable, ventilated roof, in ventilated or interred wall, inter-floor ceiling or heat diffusing flooring.
EDILFOAMExtruded polystyrene insulation boards
Advantages√ Goodthermalproperties√ Excellentcompressionresistance√ Negligiblewaterabsorption√ Extremeversatilityofuse√ Lightnessandrecyclability
OptionsandtypesStandard finishing: straight or ledged edges; standard surface: extrusion skin. Standard colors: yellow or lilac.
Ther
moa
cous
tic
Insu
lati
on
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
THERMOACOUSTICINSULATION
SpecificationsThermal insulation boards made of extruded polystyrene with extrusion skin, with straight or ledged edges, having a thermal conductivity of ... W/mK and resistance to compression equal to, at least, ... kPa.
MainapplicationsRoof insulationWall insulation Floor or ceiling insulation
Standard finishing: straight or ledged edges; standard surface: extrusion skin.Thicknesses 120, 140 and 160 mm only with ledged edges.Standard color: yellow or lilac.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
EDILFOAMExtruded polystyrene insulation boards
Properties Test Unit Values
thickness mm 30 40 50 60 80 100 120 140 160
thickness tolerance EN 823 mm -2/+2 -2/+3 -2/+8
resistance to compression with deformation of 10% EN 826 kPa 300 (250 for straight edges)
thermal conductivity value EN 12667 W/mK 0,033 0,034 0,036 0,038
thermal resistance EN 13165 m2K/W 0,90 1,20 1,45 1,75 2,20 2,75 3,30 3,85 4,20
class of reaction to fire EN 13501-1 E
max temperature for use °C +75
vapour resistance EN 12086 150 100
absorption of water by immersion (28 days) EN 12087 Vol. % < 0,7
Standardsize Unit Values
thickness mm 30 40 50 60 80 100 120 140 160
panel width mm 600
panel length mm 1250
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Ther
moa
cous
tic
Insu
lati
on
Felt made of wool glass treated with heat-strengthened resins coated on one side with polythenated kraft paper whose function is to act as a vapour control layer. Suitable for thermal and acoustic insulation of roofs whose insulation does not perform a load-bearing function.
SAGLANThermoacoustic insulating roll made of glass wool
Advantages√ Sizestability√ Goodacousticproperties√ Waterproofingandnon-hygroscopic√ Excellentfireresistance
OptionsandtypesThe felt is available in rolls of different lengths on the basis of thickness, and also in the versions: bare, with natural fiberglass (VL), with black fiberglass (VN) and with polythenated reinforced aluminum (AL).
Ther
moa
cous
tic
Insu
lati
on
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
THERMOACOUSTICINSULATION
SpecificationsFelt made from glass wool treated with heat-hardening resins coated on one side by polythenated kraft paper which acts as a barrier to steam; its density is equal to 12 kg/m3, the product has a thermal conductivity equal to 0,040 W/mK.
MainapplicationsRoof insulation
The felt is available in the floowing versions: bare, with natural fiberglass (VL), with black fiberglass (VN), with polythanated reinforced aluminum (AL).
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
SAGLANThermoacoustic insulating roll made of glass wool
Properties Test Unit Values
thickness mm 50 60 80 100 120
density kg/m3 12
thickness tolerance EN 823 T2
size stability EN 1604 DS(T1)
thermal conductivity value UNI EN 12667 W/mK 0,040
resistance to steam diffusion EN 12806 1
vapour permeability g/m2/24h 22,3
heat capacity EN 10456 J/kgK 1030
resistance to air flow EN 29053 AF5
class of reaction to fire EN 13501-1 F
class of reaction to fire of the bare felt or coated with VL, VN or AL EN 13501-1 A1
Standardsize Unit Values
thickness mm 50 60 80 100 120
roll width m 1,2
roll length m 18 16 13,5 10,5 6
rolls per pallet n° 24
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Ther
moa
cous
tic
Insu
lati
on
Rigid self-supporting panel made of water-proof glass wool treated with heat-hardening resins. Suitable for thermal and acoustic insulation in walls, both perimeter and interior walls.
SAGLANLThermoacoustic panel made of glass wool
Advantages√ Sizestability√ Goodacousticproperties√ Waterproofingandnon-hygroscopic√ Excellentfireresistance
OptionsandtypesThe panel is available in these versions: with polythenated kraft paper (CK), with natural fiberglass (VL), with black fiberglass (VN) and with reinforced polythenated aluminum (AL).
Ther
moa
cous
tic
Insu
lati
on
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
THERMOACOUSTICINSULATION
SpecificationsSelf-supporting rigid panel made of waterproof glass wool treated with heat-hardening resins, of density equal to 32 kg/m3, the product has a thermic conductivity of 0.032 W/mK.
MainapplicationsWall insulation
The panel is available in the following versions: with polyethenated kraft paper (CK), with natural fiberglass (VL), with black fiberglass (VN), with reinforced polythenated aluminum (AL).
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
SAGLANLThermoacoustic panel made of glass wool
Properties Test Unit Values
thickness mm 60 80 100 120 140 160 180 200 220 240 260
density kg/m3 32
thickness tolerance EN 823 T2
size stability EN 1604 DS(T1)
thermal conductivity value UNI EN 12667 W/mK 0,032
resistance to steam diffusion EN 12806 1
heat capacity EN 10456 J/kgK 1030
class of reaction to fire of the CK-coated panel EN 13501-1 F
class of reaction to fire of the bare panel or coated with VL, VN or AL EN 13501-1 A1
Standardsize Unit Values
thickness mm 60 80 100 120 140 160 180 200 220 240 260
panel width mm 600
panel length mm 1250
quantity per package m2 7,50 6,00 4,50 4,50 3,75 3,00 3,00 2,25 2,25 2,25 1,50
quantity per pallet m2 90 72 54 54 45 36 36 27 27 27 18
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Ther
moa
cous
tic
Insu
lati
on
Breathable membrane made of polypropylene for pitched roof applications, also usable in the wall as an air barrier. It can be installed in direct contact with thermal insulation.
ITALVENTBreathable polypropylene membrane
Advantages√ Lightandeasytoinstall√ Totallyatoxic√ Excellentageingproperties
OptionsandtypesThe product is available in 5 weights, with the same breathable properties (except for 250).
Roofi
ngU
nder
laye
rSol
utio
ns
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
ROOFINGUNDERLAYER
SpecificationsBreathable membrane made of polypropylene with mass per unit area of … g/m2, class E fire reaction and property of vapour transmission of .. m.The membrane will have a tensile strength equal to …/… N/50mm with relative deformation of …/…%.
MainapplicationsPitch roofs
* MD=machine direction; CD=cross direction
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ITALVENTBreathable polypropylene membrane
Properties Test Unit Values
mass per unit area g/m2 135 150 170 200 250
vapour resistance Sd EN 1931 m 0,02 0,035
tensile strength MD/CD* EN 12311-2 N/50mm 290/205 310/215 330/230 350/250 650/800
elongation at break point MD/CD* EN 12311-1;2 % 45/80 45/80 55/80 70/90 40/60
tear resistance MD/CD* EN 12310-2 N 150/180 165/190 190/230 260/330 750/550
size stability EN 1107-2 % < 2
flexibility to low temperatures EN 1109 °C -40 -20
class of reaction to fire EN 13501 E
Standardsize Unit Values
mass per unit area g/m2 135 150 170 200 250
roll length m 50
roll width m 1/1,5/3 1,5
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Roofi
ngU
nder
laye
rSol
utio
ns
Membrane for vapour control, to be laid in the inner side of the thermal insulation layer, also as an air barrier, in combination with a breathable membrane.
ITALVAPMembrane for vapour control
Advantages√ Lightnessandeasyinstallation√ Totallyatoxic√ Excellentageingproperties
OptionsandtypesThe product is available in 3 weights with different properties of vapour transmission
Roofi
ngU
nder
laye
rSol
utio
ns
ROOFINGUNDERLAYER
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsMembrane for the vapour control having a mass per unit area of … g/m2, class E fire reaction and properties of vapour transmission of ... m.The membrane will have a tensile strength equal to …/… N/50mm with relative deformation of …/…%.
MainapplicationsPitch roofsWalls
* MD=machine direction; CD=cross direction** Placed on insulating layer
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ITALVAPMembrane for vapour control
Properties Test Unit Values
mass per unit area g/m2 140 150 160
vapour resistance Sd EN 1931 m 12 5 20
tensile strength MD/CD* EN 12311-2 N/50mm 190/160 200/180 210/170
elongation at break point MD/CD* EN 12311-1;2 % 40/50 40/40 40/50
tear resistance MD/CD* EN 12310-2 N 110/110 100/110 130/140
class of reaction to fire EN 13501 E**
Standardsize Unit Values
mass per unit area g/m2 140 150 160
roll length m 50
roll width m 1,5
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Roofi
ngU
nder
laye
rSol
utio
ns
Bentonite geocomposite made of three-layers, connected to one another by means of needle punching of fibres passing from the upper layer to the lower one. An optional integral PE membrane (version CS) is also available.
MANTOBENTBentonite geocomposite
Advantages√ Highversatilitysuitsmanyapplications√ Self-weldingcapability√ Excellent mechanical and puncture
resistanceproperties
OptionsandtypesIn addition to Mantobent CS featuring a polyethylene membrane, the following accessories are also available:- STRIP (bentonite sealing strip)- PASTE (bentonite paste in drums).
Wat
erpr
oofin
g
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
WATERPROOFING
SpecificationsBentonite geocomposite made of three-layers, connected to one another by means of needle punching of fibres passing from the upper layer to the lower one. An optional integral PE membrane (version CS) is also available.The geocomposite will have a thickness of ... mm, a total weight of ... g/m2, a quantity of sodium bentonite of 5000 g/m2 with montmorillonite content greater than 75%.The minimum tensile strength will be .../... kN/m.
MainapplicationsCivil engineeringIndustrial constructionsWaterproofing in general
* MD=machine direction; CD=cross directionThe following accessories are also available:- MANTOBENT STRIP (bentonite sealing strip)- MANTOBENT PASTE (bentonite paste in drums).
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
MANTOBENTBentonite geocomposite
Properties Test Unit Values
type C CS
dry thickness EN ISO 9863-1/2 mm 7,4 7,6
total weight ASTM D5993 g/m2 5300 5500
montmorillonite content % > 75 > 75
upper PP geotextile weight (nonwoven) g/m2 200 200
lower PP geotextile weight (woven) g/m2 100 100
PE membrane thickness mm - 0,2
quantity of sodium bentonite in powder form g/m2 5000 5000
swelling index ASTM D5890 ml/2g > 24 > 24
humidity content DIN 18121-1/2 % < 12 < 12
tensile strength MD/CD* EN ISO 10319 kN/m > 10,4/8,5 > 10,4/10,4
static puncture resistance CBR EN ISO 12236 kN 1,8 1,8
Standardsize Unit Values
type C CS
roll width m 5,10/2,55/1,25 5/2,50/1,25
roll length m 40/20/5,10 40/20/5
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Wat
erpr
oofin
g
Membrane with a triple layer of low-density polyethylene (LDPE), reinforced with internal woven high-density polyethylene (HDPE), particularly suited to projects involving temporary coverings/cappings and water storage/attenuation basins.
ITALFOILWaterproof membrane made of reinforced PE
Advantages√ Simpletolay√ Customizedformatsavailable
OptionsandtypesStandard color: green;product supplied in prepackaged sheets, with the chance to have customized measurements.
“COVER UP” version: smaller sheets with reinforced edges and buttonholes.
Wat
erpr
oofin
g
WATERPROOFING
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
SpecificationsMembrane with triple layer of low density polyethylene (LDPE), strengthened with internal woven high densisty polethylene reinforcement (HDPE) with mass per unit area of … g/m2, thickness … mm, tensile strength of … daN/5cm and tear resistance of ... daN. Also available in smaller formats (COVER UP) with reinforced borders and bottonholes every meter.
MainapplicationsHydraulic worksTemporary coverings
Standard colour: green.The product is suitable for general uses and is not intended for the applications provided by the comprehensive norms concerning Geosynthetics with barrier function: all liability is declined for any improper use.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ITALFOILWaterproof membrane made of reinforced PE
Properties Test Unit Values
type 220 350 700 240COVERUP
thickness at 2 kPa EN 1849-2 mm 0,35 0,55 0,80 0,40
mass per unit area EN 1849-2 g/m2 220 350 700 240
tensile strength EN ISO 527 daN/5cm 95 140 140 100
tear resistance ISO 34-1/B daN 14,5 38,0 20,0 -
UV resistance stabilized at 5%
temperature range of use °C from -30 to +70
Standardsize Unit Values
type 220 350 700 240COVERUP
measurements m standard up to 20; on request up to 40sheet size:
2m up to 8m x 3m up to 12m
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Wat
erpr
oofin
g
Membrane made of low-density monoextruded polyethylene particularly suitable for waterproofing applications such as basins and temporary covers in the construction industry. Joints are made by hot-air welding for the higher thickness products and with double-sided adhesive tape for the thinner products.
MEMBRANAECOLOGICANERALDPE waterproof membrane
Advantages√ Widerangeoftypesandapplications√ Lightandflexible√ Easytolayandjoin
OptionsandtypesProduct supplied in rolls of different lengths depending on thickness.
Wat
erpr
oofin
g
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
WATERPROOFING
SpecificationsMembrane made of low density monoextruded polyethylene (LDPE), with the following characteristics:• Thickness ... mm • Tensile strength … MPa• Strain at maximum load …%.
MainapplicationsGeneral buildingHydraulic worksTemporary coverings
The product is suitable for general use and is not suited to applications provided by the comprehensive norms on Geosynthetics with barrier function: all liability is declined for any improper use.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
Properties Test Unit Values
type 0.20 0.30 0.40 0.50 0.75 1.00
thickness mm 0,20 0,30 0,40 0,50 0,75 1,00
tensile strength EN ISO 527-3 Mpa 17 18 18 16
strain at maximum load EN ISO 527-3 % 400 550 600
impact resistance (flat) ISO 7765-1 mA cN 400 400 500 800
impact resistance (bent) ISO 7765-1 mA cN 240 240 300 700
Standardsize Unit Values
type 0.20 0.30 0.40 0.50 0.75 1.00
roll width m 6
roll length m 42 28 167
MEMBRANAECOLOGICANERA LDPE waterproof membrane
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Wat
erpr
oofin
g
3-D anti-erosion geomat made of tangled polypropylene monofilaments in a cuspated structure, with a high void index, to foster the soil’s feeding and consequent engraftment of the plant layer.
ITALGRIMP3-D anti-erosion geomat made of PP
Advantages√ Lightness,flexibility,adaptabilityto
thesurface√ Capacityofthestructuretowithhold
importantsoillevels
OptionsandtypesStandard color: black; also available in green or brown.
Special versions:R1: with reinforcement by PET geogrids of various strengths.MR: with waterproof membrane.
Geo
tech
nolo
gy
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
GEOTECHNOLOGY
Specifications3-D anti-erosion geomat made of polypropylene monofilaments heat-welded to each other in the contact points and tangled according to a cuspate structure, with void index > 90%.The geomat will have the following characteristics:• thickness ... mm.• mass per unit area... g/m2.• tensile strength MD/CD .../... kN/m• deformation at maximum load MD/CD .../... %
Main applicationsInfrastructure and geotechnical works
* MD= machine direction; CD=cross directionExpected minimum durability of 25 years in natural terrains with 4<pH<9 and temperatures <25°C.Standard colour: black UV stabilized by carbon black. The product should not be exposed to UV for over one month.Product also available in the versions:R1 - with reinforcement through PET geogrids of various strengthsMR - with waterproof membrane
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ITALGRIMP3-D anti-erosion geomat made of PP
Properties Test Unit Values
type 9.1 13.1 19.1
thickness at 2 kPa EN ISO 9863-1 mm 9 13 19
mass per unit area EN ISO 9864 g/m2 430 490 550
minimum void index % 90
tensile strength MD* EN ISO 10319 kN/m 2,0 2,0 2,3
tensile strength CD* EN ISO 10319 kN/m 1,0 1,0 1,0
deformation at maximum load MD* EN ISO 10319 % 80,0 55,0 55,0
deformation at maximum load CD* EN ISO 10319 % 40,0 60,0 50,0
Standard size Unit Values
type 9.1 13.1 19.1
roll width m 2,15 4,30 2,10 4,20 2,10 4,20
roll length m 55 120 40 40 50 50
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Geo
tech
nolo
gy
Anti-erosion Biomat (or Bionet) made of biodegradable natural fibers, particularly recommended in cases in which hydroseeding is planned.
ITALMANT-ITALMANTNETAnti-erosion Biomat/Bionet made of natural fibers
Advantages√ Lightness,flexibility,adaptabilityto
thesurface√ Totalbiodegradabilityofthenatural
fiber
OptionsandtypesThe ITALMANT Biomat is available in straw, coconut or a blend of these two fibers;
The ITALMANT-NET Bionet is made of jute fibers.
Geo
tech
nolo
gy
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
GEOTECHNOLOGY
SpecificationsNatural anti-erosion Biomat/Bionet made of ... fiber ( ... %) and .......fiber ( ... %), with mass per unit area equal to 500 g/m2.
MainapplicationsInfrastructure and geotechnical works
* The Biomats are supplied in rolls; the Bionets are supplied in bales. The Biomats are bordered by two micronets in PP.
The data expressed here are provided in good faith and refer to the mean values of the current production; we reserve the right to update the performances without notice, following technological development and/or our experiences. The product users will have to ascertain its compatibility with its specific utilisation.
ITALMANT-ITALMANTNETAnti-erosion Biomat/Bionet made of natural fibers
Properties Test Unit Values
type P PC PPC C J-NET
fiber straw straw 50%coconut 50%
straw 70%coconut 30% coconut jute
mass per unit area g/m2 500
mesh size mm - - - - 20 x 15
Standardsize Unit Values
type P PC PPC C J-NET
width* m 2,4 1,2
length* m 42 68,5
OfficineMaccaferriS.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 14 - 42020 S. POLO D'ENZA (RE) - Italy - Tel. +39 0522 244211 - Fax +39 0522 244244 - [email protected] - www.maccaferri.biz
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Apr
il 20
12
Geo
tech
nolo
gy
Bureau Veritas Certified Quality System Company with
ACCREDIA’s and UKAS’s accreditation
Officine Maccaferri S.p.A.Building, Industry and Sport divisionVia Papa Giovanni XXIII, 1442020 S. POLO D'ENZA (RE) - Italy Tel. +39 0522 244211 - Fax +39 0522 [email protected] - www.maccaferri.biz
© O
ffici
ne M
acca
ferr
i S.p
.A. -
Bol
ogna
- Ita
ly