Innovations in Surface Technology for the Concrete WorldThis specially designed IBIX Tungsten...
Transcript of Innovations in Surface Technology for the Concrete WorldThis specially designed IBIX Tungsten...
727.322.4611www.IBIXUSA.com
Authorized Supplier of &
Cleaning and Coating Removal Systems
® © Copyright IBIX Surface Technologies LLC 2015 ® Registered Trademarks of IBIX Surface Technologies, LLC
Innovations in Surface
Technology for the Concrete World
HEADQUARTERS FLORIDA, USA
Optional Equipment Available for all IBIX Units
Additional Nozzle Kits Available for Purchase with all IBIX Units
The patented HELIX® Gun uses a gentle, helical rotational movement. This soft sanding motion is safe for use on antique metals yet powerful enough to remove unwanted debris such as rust and corrosion. Maximizing effectiveness while minimizing damage to delicate surfaces.
IB-VRK220-USA Compressors Including the only patented Hydro-SEP a centrifugal moisture separator. Taking the humidity out of the air flow naturally improves the performance of your abrasive and provides a smooth consistent air flow. The 70 cfm dry air production system, with multi-port hose connections, is very quiet for urban cleaning (72db). The perfect match for I25 and I9 units.
Revolutionary Technology...Maximum Versatility
IB-VRK220-USA Compressor Includes Patent Drying
Water Separator Hydro-SEP
Rotational Gun Fits All UnitsQuick Click System available for Retrofitting Standard Systems with New Helix Gun
Green AbrasivesThe IBIX North America business philosophy is dedicated to saving the environment for the
next generation. All of our abrasive media are 100% safe and non-toxic to the operator and
environment and are regulatory compliant. Our units are made to be used with or without water.
Micro-abrasive blasting with water reduces dust considerably. We offer environmentally friendly
abrasive materials for use with our units: Soda, Calcium, Walnut Shells, Glass Beads & Garnet.
Cost Effective and SafeChoosing a natural media instead of traditional chemicals creates a less toxic, less dusty environment. It’s safer for the operator and the environment, while producing the best possible surface finish. Our Units allow for wide variety of choices, even extremely fine 200-350 Mesh.
Authorized Supplier of
Cleaning and Coating Removal Systems
®
IBIX Innovations for Concrete Anchoring Systems Introducing an innovative breakthrough for preparing concrete for anchoring systems. IBIX portable cleaning systems success stripping road markings and epoxy coatings off concrete, lead to new technology developments.
This specially designed IBIX Tungsten Carbide Blast Nozzle for I-40 and I-25, consists of a 90 degree angle, allowing the abrasive media to evenly profile the inside of the hole or pipe. This naturally improves the anchoring strength by providing increased grip and torque for epoxy materials.
Applications include; Bridge Anchors, Building Balconies, Rail Anchor Systems, Cat Walks and much more. Virtually any concrete hole that requires joining another surface with epoxy.
We are committed to protecting the environment
for the next generation
Satisfied CustomerDon’t take our word for it, listen to one of many satisfied customers;
“We take the 25 into tight quarters to perform detail prep work, areas that in the past were dedicated to needle scalers or grinders. Those methods were time consuming at best.
The two 40’s really are amazing. We can dial in the pressure, the vol-ume of grit and the interchangeable tungsten carbide nozzles, adjust the blast pattern. Shortened time moving equipment, using less grit and more efficient production adds to our bottom line.
My foreman recently blasted several shear transfer devices to white metal using minimal grit, reducing airborne dust, in blistering speed.
We are extremely pleased with the performance of the equipment.
Hank Taylor, PresidentEpoxy Design Systems, Inc.
Success Story with NY Rail System
IBIX Custom Blast
Nozzle I-76127
Hole Preparation Made Easy
Our new IBIX Tungsten Carbide Tip for hole sizes:Diameter: 3” – 5”Depth: Maximum 3’ (Adjustable Lance for Custom Depth Specifications)
90˚ Angle for Even Profiling 15 Second Per Hole Operation (with Garnet Media)
Doubles Epoxy’s Strength CapabilityDeflector Vacuum Available
Patent Pending
Proven in the Field... Kiewit, NYRailroad Anker System
Replacement ties completed October 2013 Chief Operator at Kiewit: Mr. Warren Howard
Developed in Conjunction with SRT Solutions1110 NASA Parkway, Houston, Texas 77058
Capable of 800-1200 Hole Operation Per day(Garnet Media Maximizes Efficiency)
Doubled the Torque Inspection Anchor Strength
Consistent, Even Profiling for Optimal Adherence of Medium
Excellent for REBAR CLEANING
UNIT INCLUDESMedia Valve for
Adjustable Media Flow
Wet Surface Treatment Nozzle with Standard
Water Connection
Funnel with Screen for Recycling
Abrasive Media
1 Year Manufacturers Warrantyon All IBIX Equipment
IBIX 25 H2O
IBIX 40 H2O
IBIX 3 H2O With BackpackPerfect for working on a ladder or in small hard to reach spaces.
Introducing the New Turbo Hi-Pro 60 High Performance Wet or Dry Blast System with High Performance Valve for Heavy Duty Work
IBIX 9 H2O
Portable Surface Preparation SystemsIBIX® lightweight, portable aluminum units incorporate a low pressure micro-air abrasion system. Perfect for cleaning and restoring concrete floors, bridges, industrial buildings, airports, malls, parking garages and much more. Unsurpassed for cleaning flooring in harsh environments like corroded factory flooring or chemical and water plants. Effective on concrete, masonry, stone, steel, aluminum, stainless steel, wood, glass, marble and composite materials. Our units a portable one-man operation, equipped with rollers for
easy portability. IBIX units are user friendly and deliver a precise, consistent even air and media flow for a smooth surface finish with very low air volume requirements. Minimal dusting improves health and safety for the operator and the environment.
Hi-Pro 60
New Larger Funnel Available
Turbo charged Valve for Dual Medial Flow. Better Flow, Faster Performance.Patent Pending
IBIX Innovations for Concrete Anchoring Systems Introducing an innovative breakthrough for preparing concrete for anchoring systems. IBIX portable cleaning systems success stripping road markings and epoxy coatings off concrete, lead to new technology developments.
This specially designed IBIX Tungsten Carbide Blast Nozzle for I-40 and I-25, consists of a 90 degree angle, allowing the abrasive media to evenly profile the inside of the hole or pipe. This naturally improves the anchoring strength by providing increased grip and torque for epoxy materials.
Applications include; Bridge Anchors, Building Balconies, Rail Anchor Systems, Cat Walks and much more. Virtually any concrete hole that requires joining another surface with epoxy.
We are committed to protecting the environment
for the next generation
Satisfied CustomerDon’t take our word for it, listen to one of many satisfied customers;
“We take the 25 into tight quarters to perform detail prep work, areas that in the past were dedicated to needle scalers or grinders. Those methods were time consuming at best.
The two 40’s really are amazing. We can dial in the pressure, the vol-ume of grit and the interchangeable tungsten carbide nozzles, adjust the blast pattern. Shortened time moving equipment, using less grit and more efficient production adds to our bottom line.
My foreman recently blasted several shear transfer devices to white metal using minimal grit, reducing airborne dust, in blistering speed.
We are extremely pleased with the performance of the equipment.
Hank Taylor, PresidentEpoxy Design Systems, Inc.
Success Story with NY Rail System
IBIX Custom Blast
Nozzle I-76127
Hole Preparation Made Easy
Our new IBIX Tungsten Carbide Tip for hole sizes:Diameter: 3” – 5”Depth: Maximum 3’ (Adjustable Lance for Custom Depth Specifications)
90˚ Angle for Even Profiling 15 Second Per Hole Operation (with Garnet Media)
Doubles Epoxy’s Strength CapabilityDeflector Vacuum Available
Patent Pending
Proven in the Field... Kiewit, NYRailroad Anker System
Replacement ties completed October 2013 Chief Operator at Kiewit: Mr. Warren Howard
Developed in Conjunction with SRT Solutions1110 NASA Parkway, Houston, Texas 77058
Capable of 800-1200 Hole Operation Per day(Garnet Media Maximizes Efficiency)
Doubled the Torque Inspection Anchor Strength
Consistent, Even Profiling for Optimal Adherence of Medium
Excellent for REBAR CLEANING
UNIT INCLUDESMedia Valve for
Adjustable Media Flow
Wet Surface Treatment Nozzle with Standard
Water Connection
Funnel with Screen for Recycling
Abrasive Media
1 Year Manufacturers Warrantyon All IBIX Equipment
IBIX 25 H2O
IBIX 40 H2O
IBIX 3 H2O With BackpackPerfect for working on a ladder or in small hard to reach spaces.
Introducing the New Turbo Hi-Pro 60 High Performance Wet or Dry Blast System with High Performance Valve for Heavy Duty Work
IBIX 9 H2O
Portable Surface Preparation SystemsIBIX® lightweight, portable aluminum units incorporate a low pressure micro-air abrasion system. Perfect for cleaning and restoring concrete floors, bridges, industrial buildings, airports, malls, parking garages and much more. Unsurpassed for cleaning flooring in harsh environments like corroded factory flooring or chemical and water plants. Effective on concrete, masonry, stone, steel, aluminum, stainless steel, wood, glass, marble and composite materials. Our units a portable one-man operation, equipped with rollers for
easy portability. IBIX units are user friendly and deliver a precise, consistent even air and media flow for a smooth surface finish with very low air volume requirements. Minimal dusting improves health and safety for the operator and the environment.
Hi-Pro 60
New Larger Funnel Available
Turbo charged Valve for Dual Medial Flow. Better Flow, Faster Performance.Patent Pending
727.322.4611www.IBIXUSA.com
Authorized Supplier of &
Cleaning and Coating Removal Systems
® © Copyright IBIX Surface Technologies LLC 2015 ® Registered Trademarks of IBIX Surface Technologies, LLC
Innovations in Surface
Technology for the Concrete World
HEADQUARTERS FLORIDA, USA
Optional Equipment Available for all IBIX Units
Additional Nozzle Kits Available for Purchase with all IBIX Units
The patented HELIX® Gun uses a gentle, helical rotational movement. This soft sanding motion is safe for use on antique metals yet powerful enough to remove unwanted debris such as rust and corrosion. Maximizing effectiveness while minimizing damage to delicate surfaces.
IB-VRK220-USA Compressors Including the only patented Hydro-SEP a centrifugal moisture separator. Taking the humidity out of the air flow naturally improves the performance of your abrasive and provides a smooth consistent air flow. The 70 cfm dry air production system, with multi-port hose connections, is very quiet for urban cleaning (72db). The perfect match for I25 and I9 units.
Revolutionary Technology...Maximum Versatility
IB-VRK220-USA Compressor Includes Patent Drying
Water Separator Hydro-SEP
Rotational Gun Fits All UnitsQuick Click System available for Retrofitting Standard Systems with New Helix Gun
Green AbrasivesThe IBIX North America business philosophy is dedicated to saving the environment for the
next generation. All of our abrasive media are 100% safe and non-toxic to the operator and
environment and are regulatory compliant. Our units are made to be used with or without water.
Micro-abrasive blasting with water reduces dust considerably. We offer environmentally friendly
abrasive materials for use with our units: Soda, Calcium, Walnut Shells, Glass Beads & Garnet.
Cost Effective and SafeChoosing a natural media instead of traditional chemicals creates a less toxic, less dusty environment. It’s safer for the operator and the environment, while producing the best possible surface finish. Our Units allow for wide variety of choices, even extremely fine 200-350 Mesh.
Authorized Supplier of
Cleaning and Coating Removal Systems
®