innovation through passion

1

1. Open the panel and remove the prefilter

Standard Operating Procedures

innovation through passion

2

1. Open the panel and remove the prefilter

2. Insert the Interceptor metal frame with the runners facing downwards

innovation through passion

3

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards

3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and identification number

innovation through passion

4

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number

4. Place the prefilter back in place above the Interceptor metal frame

innovation through passion

5

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number4. Place the prefilter back in place above the Interceptor metal frame

5. Push the Interceptor sliding section to expose the filter

innovation through passion

6

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number4. Place the prefilter back in place above the Interceptor metal frame5. Push the Interceptor sliding section to expose the filter

6. Close the panel and leave Interceptor working for the required time

innovation through passion

7

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number4. Place the prefilter back in place above the Interceptor metal frame5. Push the Interceptor sliding section to expose the filter6. Close the panel and leave Interceptor working for the required time

7. Pull the Interceptor sliding section to protect the filter before extracting the Interceptor

innovation through passion

8

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number4. Place the prefilter back in place above the Interceptor metal frame5. Push the Interceptor sliding section to expose the filter6. Close the panel and leave Interceptor working for the required time7. Pull the Interceptor sliding section to protect the filter before extracting the Interceptor

8. OPTION A: Write Date OUT and individually place each Interceptor in the provided sealable bags for shipment and analysis

innovation through passion

9

8. OPTION B (Charles River Preferred Method): Remove filter from Interceptor as shown and submit in labelled 50 ml tube (provided by Charles River)

innovation through passion

10

1. Open the panel and remove the prefilter2. Insert the Interceptor metal frame with the runners facing downwards3. Insert one or two Interceptors (a second Interceptor can be used as backup) after writing date IN and

identification number4. Place the prefilter back in place above the Interceptor metal frame5. Push the Interceptor sliding section to expose the filter6. Close the panel and leave Interceptor working for the required time7. Pull the Interceptor sliding section to protect the filter before extracting the Interceptor8. Write Date OUT and singly enclose each Interceptor in the provided sealable bags before shipment for analysis

9. Send samples to Charles River Laboratories. For further information please click here.

Charles RiverRADS PCR Laboratory 261 Ballardvale Street Building 22 Loading Dock Wilmington, MA 01887 USA