Innovation, Design, Manufacture & Aftermarket Services ... · Water & Industrial - driven by...
Transcript of Innovation, Design, Manufacture & Aftermarket Services ... · Water & Industrial - driven by...
CLYDEUNION PUMPS WATER & INDUSTRIAL 1
clydeunion.com/water-industrial-overview
Innovation, Design, Manufacture & Aftermarket Services:Pumping solutions for a better world
2 CLYDEUNION PUMPS CONVENTIONAL POWER 3
Today, CLYDEUNION is recognised as a
world-leading centre of excellence in pump
technology and bespoke pumping solutions.
We are active across many market sectors,
with our main operations relating to highly
critical areas throughout oil extraction and
processing, nuclear power, conventional
power, water treatment, desalination and
other industrial applications.
The history of CLYDEUNION beginswith the formation, in 1871, of theengineering firm of G&J Weir. Foundedby brothers James and George Weir inGlasgow, the company quickly prosperedas a result of the improvements theyintroduced to pump machinery andvalve technologies. Their work foundapplications across the world, frommarine engines and power stationsto desalination plants.
By the end of the twentieth century,G&J Weir had acquired DrysdalePumps, Harland, Mather and Platt,and WH Allen. They had also, under
the name Weir Pumps, grown intoone of the most respected and iconicengineering enterprises in Scotland.
Meanwhile, just 14 years after theestablishment of G&J Weir, the UnionManufacturing Pump Company wasincorporated in 1885 in MichiganUSA. Specialising in the design andmanufacturing of steam pumps,they grew prosperous, adopted thename Union Pump and establisheda Canadian sister company.
In 2006, two other highly respectedspecialist companies, David BrownPumps of England and DB Guinard
Pumps of France, were broughtunder the Union Pump umbrella.
A new chapter in the developmentof both companies began in 2007,when Weir Pumps was bought byClyde Blowers, a company ownedand run by Jim McColl (who hadstarted his working life as an apprenticewith Weir Pumps). At this time thename changed to Clyde Pumps.In 2008, Clyde Blowers bought UnionPump and amalgamated the twospecialist engineering companiesinto CLYDEUNION.
Generations of experience
While the name is comparatively recent, CLYDEUNION Pumps is one of the mostexperienced specialist engineering companies in the world. Formed through theacquisition and integration of a series of highly respected pumpmanufacturers anddesigners on both sides of the Atlantic, CLYDEUNION incorporates an accumulationof well over 300 years of engineering expertise.
George Weir: The eldest ofthe brothers, George trainedas a ship’s engineer.
James Weir: The second eldest, James began workat 15 in a consulting engineers in Glasgow. He wasthe inventor of the celebrated direct-acting feed pump.
It’s in the DNA: Inspectors oversee the assembly of aturbine feed pump, a precursor to the state of the artTWL widely used in nuclear power stations today.
*This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
}*Weir Pumps, Mather & Platt,Drysdale, WH Allen, Girdlestone,
Allen Gwynnes and Harland
Union Pump, David Brown Pumps,DB Guinard Pumps, American
Pump and Pumpline
2 CLYDEUNION PUMPS CONVENTIONAL POWER 3
Today, CLYDEUNION is recognised as a
world-leading centre of excellence in pump
technology and bespoke pumping solutions.
We are active across many market sectors,
with our main operations relating to highly
critical areas throughout oil extraction and
processing, nuclear power, conventional
power, water treatment, desalination and
other industrial applications.
The history of CLYDEUNION beginswith the formation, in 1871, of theengineering firm of G&J Weir. Foundedby brothers James and George Weir inGlasgow, the company quickly prosperedas a result of the improvements theyintroduced to pump machinery andvalve technologies. Their work foundapplications across the world, frommarine engines and power stationsto desalination plants.
By the end of the twentieth century,G&J Weir had acquired DrysdalePumps, Harland, Mather and Platt,and WH Allen. They had also, under
the name Weir Pumps, grown intoone of the most respected and iconicengineering enterprises in Scotland.
Meanwhile, just 14 years after theestablishment of G&J Weir, the UnionManufacturing Pump Company wasincorporated in 1885 in MichiganUSA. Specialising in the design andmanufacturing of steam pumps,they grew prosperous, adopted thename Union Pump and establisheda Canadian sister company.
In 2006, two other highly respectedspecialist companies, David BrownPumps of England and DB Guinard
Pumps of France, were broughtunder the Union Pump umbrella.
A new chapter in the developmentof both companies began in 2007,when Weir Pumps was bought byClyde Blowers, a company ownedand run by Jim McColl (who hadstarted his working life as an apprenticewith Weir Pumps). At this time thename changed to Clyde Pumps.In 2008, Clyde Blowers bought UnionPump and amalgamated the twospecialist engineering companiesinto CLYDEUNION.
Generations of experience
While the name is comparatively recent, CLYDEUNION Pumps is one of the mostexperienced specialist engineering companies in the world. Formed through theacquisition and integration of a series of highly respected pumpmanufacturers anddesigners on both sides of the Atlantic, CLYDEUNION incorporates an accumulationof well over 300 years of engineering expertise.
George Weir: The eldest ofthe brothers, George trainedas a ship’s engineer.
James Weir: The second eldest, James began workat 15 in a consulting engineers in Glasgow. He wasthe inventor of the celebrated direct-acting feed pump.
It’s in the DNA: Inspectors oversee the assembly of aturbine feed pump, a precursor to the state of the artTWL widely used in nuclear power stations today.
*This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
}*Weir Pumps, Mather & Platt,Drysdale, WH Allen, Girdlestone,
Allen Gwynnes and Harland
Union Pump, David Brown Pumps,DB Guinard Pumps, American
Pump and Pumpline
Assembly of industrial pumps in our Glasgow facility at the beginning of the 20th Century.
George Weir: The eldest of the brothers, George trained as a ships engineer.
James Weir: The second eldest, James began work at 15 in a consulting engineers in Glasgow. He was the inventor of the celebrated direct-acting feed pump.
The history of CLYDEUNION Pumps begins with the formation, in 1871, of the engineering firm of G&J Weir. Founded by brothers George and James Weir in Glasgow, the company quickly prospered as a result of the improvements they introduced to pump machinery and valve technologies . Their work found applications across the world, from marine engines and power stations to desalination plants.
By the end of the twentieth century G&J Weir had aquired Drysdale Pumps, Harland, Mather and Platt, and WH Allen. They had also, under
the name Weir Pumps, grown into one of the most respected and iconic engineering enterprises in Scotland.
Meanwhile just 14 years after the establishment of G&J Weir, the Union Manufacturing Pump Company was incorporated in 1885 in Michigan USA. Specialising in the design and manufacturing of steam pumps they grew prosperous, adopted the name Union Pump and established a Canadian sister company.
In 2006, two other highly respected specialist companies, David Brown Pumps of England and DB Guinard
Pumps of France, were bought under the Union Pump umbrella.
A new chapter in the development of both companies began in 2007, when Weir Pumps was bought by Clyde Blowers, a company owned and run by Jim McColl (who had started his working life as an apprentice with Weir Pumps). At this time the name changed to Clyde Pumps. In 2008, Clyde Blowers bought Union Pump and amalgamated the two specialist engineering companies into CLYDEUNION Pumps.
2 CLYDEUNION PUMPS CONVENTIONAL POWER 3
Today, CLYDEUNION is recognised as a
world-leading centre of excellence in pump
technology and bespoke pumping solutions.
We are active across many market sectors,
with our main operations relating to highly
critical areas throughout oil extraction and
processing, nuclear power, conventional
power, water treatment, desalination and
other industrial applications.
The history of CLYDEUNION beginswith the formation, in 1871, of theengineering firm of G&J Weir. Foundedby brothers James and George Weir inGlasgow, the company quickly prosperedas a result of the improvements theyintroduced to pump machinery andvalve technologies. Their work foundapplications across the world, frommarine engines and power stationsto desalination plants.
By the end of the twentieth century,G&J Weir had acquired DrysdalePumps, Harland, Mather and Platt,and WH Allen. They had also, under
the name Weir Pumps, grown intoone of the most respected and iconicengineering enterprises in Scotland.
Meanwhile, just 14 years after theestablishment of G&J Weir, the UnionManufacturing Pump Company wasincorporated in 1885 in MichiganUSA. Specialising in the design andmanufacturing of steam pumps,they grew prosperous, adopted thename Union Pump and establisheda Canadian sister company.
In 2006, two other highly respectedspecialist companies, David BrownPumps of England and DB Guinard
Pumps of France, were broughtunder the Union Pump umbrella.
A new chapter in the developmentof both companies began in 2007,when Weir Pumps was bought byClyde Blowers, a company ownedand run by Jim McColl (who hadstarted his working life as an apprenticewith Weir Pumps). At this time thename changed to Clyde Pumps.In 2008, Clyde Blowers bought UnionPump and amalgamated the twospecialist engineering companiesinto CLYDEUNION.
Generations of experience
While the name is comparatively recent, CLYDEUNION Pumps is one of the mostexperienced specialist engineering companies in the world. Formed through theacquisition and integration of a series of highly respected pumpmanufacturers anddesigners on both sides of the Atlantic, CLYDEUNION incorporates an accumulationof well over 300 years of engineering expertise.
George Weir: The eldest ofthe brothers, George trainedas a ship’s engineer.
James Weir: The second eldest, James began workat 15 in a consulting engineers in Glasgow. He wasthe inventor of the celebrated direct-acting feed pump.
It’s in the DNA: Inspectors oversee the assembly of aturbine feed pump, a precursor to the state of the artTWL widely used in nuclear power stations today.
*This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
}*Weir Pumps, Mather & Platt,Drysdale, WH Allen, Girdlestone,
Allen Gwynnes and Harland
Union Pump, David Brown Pumps,DB Guinard Pumps, American
Pump and Pumpline
2 CLYDEUNION PUMPS CONVENTIONAL POWER 3
Today, CLYDEUNION is recognised as a
world-leading centre of excellence in pump
technology and bespoke pumping solutions.
We are active across many market sectors,
with our main operations relating to highly
critical areas throughout oil extraction and
processing, nuclear power, conventional
power, water treatment, desalination and
other industrial applications.
The history of CLYDEUNION beginswith the formation, in 1871, of theengineering firm of G&J Weir. Foundedby brothers James and George Weir inGlasgow, the company quickly prosperedas a result of the improvements theyintroduced to pump machinery andvalve technologies. Their work foundapplications across the world, frommarine engines and power stationsto desalination plants.
By the end of the twentieth century,G&J Weir had acquired DrysdalePumps, Harland, Mather and Platt,and WH Allen. They had also, under
the name Weir Pumps, grown intoone of the most respected and iconicengineering enterprises in Scotland.
Meanwhile, just 14 years after theestablishment of G&J Weir, the UnionManufacturing Pump Company wasincorporated in 1885 in MichiganUSA. Specialising in the design andmanufacturing of steam pumps,they grew prosperous, adopted thename Union Pump and establisheda Canadian sister company.
In 2006, two other highly respectedspecialist companies, David BrownPumps of England and DB Guinard
Pumps of France, were broughtunder the Union Pump umbrella.
A new chapter in the developmentof both companies began in 2007,when Weir Pumps was bought byClyde Blowers, a company ownedand run by Jim McColl (who hadstarted his working life as an apprenticewith Weir Pumps). At this time thename changed to Clyde Pumps.In 2008, Clyde Blowers bought UnionPump and amalgamated the twospecialist engineering companiesinto CLYDEUNION.
Generations of experience
While the name is comparatively recent, CLYDEUNION Pumps is one of the mostexperienced specialist engineering companies in the world. Formed through theacquisition and integration of a series of highly respected pumpmanufacturers anddesigners on both sides of the Atlantic, CLYDEUNION incorporates an accumulationof well over 300 years of engineering expertise.
George Weir: The eldest ofthe brothers, George trainedas a ship’s engineer.
James Weir: The second eldest, James began workat 15 in a consulting engineers in Glasgow. He wasthe inventor of the celebrated direct-acting feed pump.
It’s in the DNA: Inspectors oversee the assembly of aturbine feed pump, a precursor to the state of the artTWL widely used in nuclear power stations today.
*This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
}*Weir Pumps, Mather & Platt,Drysdale, WH Allen, Girdlestone,
Allen Gwynnes and Harland
Union Pump, David Brown Pumps,DB Guinard Pumps, American
Pump and Pumpline
While the name is comparatively recent CLYDEUNION Pumps is one of the most experienced specialised engineering companies in the world. Formed through the acquisition and integration of a series of highly respected pump manufacturers and designers on both sides of the Atlantic , CLYDEUNION Pumps incorporates an accumulation of over 300 years of engineering expertise.
Generations of experience
CLYDEUNION PUMPS WATER & INDUSTRIAL 3CLYDEUNION PUMPS WATER & INDUSTRIAL 3
Today, CLYDEUNION Pumps is recognised
as a world-leading centre of excellence in
pump technology and bespoke pumping
solutions. We are active across many
market sectors, with our main operations
relating to highly critical areas throughout
water treatment, desalination, industrial
applications, oil extraction and processing,
nuclear power and conventional power.
Water & Industrial - driven by customer service
At CLYDEUNION Pumps we understand the needs of the desalination market. Soon after our formation in 2008, we brought together engineering expertise and experience from throughout our global organisation to create a specialist team focused solely on serving the desalination industry and meeting its specific requirements. We deliver best efficiency, performance and quality at market leading pricing.
This team forms a key part of our dedicated business unit, strategically aligned with customers’ requirements and fully committed to the working practices, and the demands of scheduling, efficiency and reliability, that prevail within the industry. This allows us to build considerable advantages into the service we offer.
We understand the paramount importance of efficiency and reliability, and the only path to robust, continuous long-term performance is engineering of the highest standard. Our engineering sets the benchmark for the industry, and our products are quality assured by our comprehensive quality system and pump test facilities.
Through a culture of engineering excellence and a customer-centred
approach we have positioned ourselves at the leading edge of pump design, and we stay there by constant investment in research and development, and the use of the most modern design techniques. This is clearly demonstrated by our industry specific, ‘sole purposely designed’ and innovative High Pressure RO pump
Within the desalination market we offer a comprehensive range of products to cover all applications from intake pumps through to product distribution and pipeline pumps. We are the complete ‘one stop shop’ pump provider for all your needs.
For specific application and pump coverage please refer to pages 12 - 13.
Main Right: High Pressure Reverse Osmosis PumpBelow L to R: BB3, In-Line & Uniglide Pumps
4
CLYDEUNION PUMPS WATER & INDUSTRIAL 5
6
CLYDEUNION Pumps has been supplying pumps to the Water Industry for almost three quarters
of a century and our recently formed Water & Industrial Business Unit team fully understands
the needs and demands of this market, worldwide. This team comprises industry specialists,
focused on customers requirements and is dedicated to providing best solutions in all cases.
Our robust product ranges, which includes well known heritage brand names such as Weir, Harland, Mather & Platt and Allen Gwynnes, are extensive and designs have been honed and developed over many years, resulting in today’s highly efficient and reliable equipment. These include vertical turbine, end suction and multistage pump frames but in particular the “UNIGLIDE” axially split casing range. This range is the most extensive of any supplier worldwide, allowing us
to optimise on efficiency for virtually every pump selection from 50 mm to 1800 mm branch sizes.
We understand the principal of Life Cycle Cost and the importance pump efficiency and minimising spare parts play in this particular role. As a consequence our products are purposely designed with these features very much to the forefront. We are also familiar with the role that variable speed applications can play in pumping and our engineers
6
are highly experienced in selecting pump, motor and drive equipment for these applications.
For details of specific applications and range coverage please refer to pages 12 - 13.
CLYDEUNION PUMPS WATER & INDUSTRIAL 7
Isoglide Technical Data
Isoglide pumps are available in a wide range
of materials with various seal options, and
are suitable for handling corrosive and non-
corrosive liquids in a variety of applications.
Capacity: up to 1,000 m3/hr / 4,400 usgpm
Delivery head: up to 200 m / 670 feet
Temperature: up to 180 °C / 350 °F
Speeds: up to 3,600 rpm
Flange drilling: BS or ANSI
Aquaglide Technical Data
The Aquaglide range of high efficiency large
end suction pumps has been developed for high
capacity water pumping applications.
Capacity: up to 10,000 m3/hr / 44,000 usgpm
Delivery head: up to 200 m / 670 feet
Temperature: up to 60 °C / 140 °F
Speeds: up to 1,500 rpm
Flange drilling: BS or ANSI
SBWM Technical Data
This pump is designed such that the net positive
suction head allows the pump to function
successfully.
Capacity: up to 40,000 m3/hr / 176,000 usgpm
Delivery head: up to 100 m / 320 feet
Temperature: up to 80 °C / 180 °F
Speeds: up to 1,760 rpm
Flange drilling: BS or ANSI
Uniglide Technical Data
The Uniglide range is a new generation of axially
split double entry pumps. This new range has
been developed by CLYDEUNION Pumps following
an extensive consultation of major users.
Capacity: up to 4,000 m3/hr / 17,600 usgpm
Delivery head: up to 200 m / 670 feet
Temperature: up to 80 °C / 180 °F
Speeds: up to 1,760 rpm
Flange drilling: BS or ANSI
CLYDEUNION PUMPS WATER & INDUSTRIAL 7
88
Swallowglide Technical Data
The Swallowglide is a solids handling end
suction pump, specifically designed for
sewage, effluent and screened sewage.
Robust design and features developed
over years of running experience make
the CLYDEUNION Pumps Swallowglide
a highly reliable pump with hundreds of
installations globally.
Capacity: up to 30,000 m3/hr
/130,000 usgpm
Delivery head: up to 130 m / 430 feet
Temperature: up to 60 °C / 140 °F
Speeds: up to 1,500 rpm
Flange drilling: BS or ANSI
Our standard solids handling Swallowglide
product lines, both vertical and horizontal
configurations, are available in a range of
materials from cast iron through to duplex
stainless steel to suit all environmental
situations throughout the world.
For specific applications and pump coverage
please refer to pages 12 & 13.
CLYDEUNION PUMPS WATER & INDUSTRIAL 99
At CLYDEUNION Pumps, through our heritage Weir Pumps designs, we have products with market leading
levels of reliability and robustness installed in wastewater plants throughout the world. These proven
designs, supported by our state of the art hydraulic and mechanical design capabilities, enable us to provide
“engineered to order” solutions for major large capacity installations. This allows us to offer customised
solutions offering optimised levels of hydraulic performance coupled with robust mechanical integrity and
operational reliability in these arduous pumping environments.
CLYDEUNION PUMPS WATER & INDUSTRIAL
10
In addition to particular duties for
individual industries listed below,
the CLYDEUNION Pumps product
range covers applications which are
common to all industries, including
general service water supply,
whether seawater, raw water or fresh
water and the pumping of slurries,
sludges and effluents.
A comprehensive range of frame
sizes in each pump type means
that CLYDEUNION Pumps can meet
virtually every duty with a pump
or combination of pumps exactly
suitable for the application• Metal Production• Mining & Quarrying• Factories & Offices• Pulp & Paper• Brewing & Distilling• Sugar• Agriculture & Irrigation• Water Supply / Water Treatment
For specific applications and pump coverage please refer to pages 12-13.
Main Right: Steel MillBelow L to R: Hard Metal Slurry Pump, Liquid Ring Vacuum Pump, Diesel Engine Skid Packages & Self Priming Pump
11CLYDEUNION PUMPS WATER & INDUSTRIAL
1212
SINGLE & TWO STAGE PUMPSSingle Stage End Suction Pump Isoglide 1,000 4,400 200 670
Single Stage Large End Suction Pump Aquaglide 10,000 44,000 200 670
Single Stage End Solids Handling Pump Swallowglide 30,000 130,000 130 430
Single Stage Axially Split Between Bearings Pump Uniglide 4,000 17,600 200 670
Two Stage Axially Split Between Bearings Pump Duoglide 1,350 5,950 275 910
Single / Two Stage API Axially Split Between Bearings Pump BB1 20,000 88,000 1,000 3,300
Single Stage Sump Pump CUP-VS4 900 4,000 150 500
Single / Two Stage Vertical Bowl / Turbine Pump CW 40,000 176,000 100 330
MULTISTAGE PUMPS
Multi Stage Vertical Bowl / Turbine Pump SBWM 40,000 176,000 100 330
Multi Stage API Vertical Diffuser / Turbine Single Case Pump VS1 7,000 31,000 600 1,900
RECIPROCATING PUMPSPower Driven Small (Single Acting Plunger) - Simplex/Duplex/Triplex
Small Power 17 75 6,900 23,00
Power Driven Medium (Single Acting Plunger) - Triplex/Quintex
Medium Power 87 385 6,900 23,00
Power Driven Large (Single Acting) - Triplex/Quintex Large Power 146 645 6,900 23,00
Power Driven Geared (Internally Geared) Geared Power 142 325 5,200 17,300
SPECIALIST PUMPS
Submersible Motor Driven Pump Ulectriglide 3,400 15,000 200 670
Concrete Volute Pump CR 120,000 530,000 70 230
USGPMKEY WATER PRODUCT TYPES
M3/HRCUPDESIGNATION
FLOWS UP TOM FTHEADS UP TO
Bore
hole
Ext
ract
ion
Filter
Was
hin
g
Fres
h W
ater
Supply
Hig
h L
ift
Pum
pin
g
Lift
Sta
tion
Wat
er T
ransf
er
Pres
sure
Boost
ing
Prim
ary
Trea
tmen
t
Raw
Wat
er
Wat
er T
reat
men
tSINGLE & TWO STAGE PUMPS
Single Stage End Suction Pump Isoglide 1,000 4,400 200 670
Single Stage Large End Suction Pump Aquaglide 10,000 44,000 200 670
Single Stage Axially Split Between Bearings Pump Uniglide 4,000 17,600 200 670
Single Stage API Vertical In-line Pump OH3 1,365 6,000 305 1,000
Single Stage API Vertical In-line Pump OH4 1,365 6,000 335 1,100
MULTISTAGE PUMPS
Multi Stage Vertical Bowl / Turbine Pump SBWM 40,000 176,000 100 330
Multi Stage API Axially Split CUP-BB3 2,500 11,000 3,000 9,960
RECIPROCATING PUMPSPower Driven Small (Single Acting Plunger) - Simplex/Duplex/Triplex Small Power 17 75 6,900 23,000
Power Driven Medium (Single Acting Plunger) - Triplex/Quintex Medium Power 87 385 6,900 23,000
Power Driven Large (Single Acting) - Triplex/Quintex Large Power 146 645 6,900 23,000
Power Driven Geared (Internally Geared) Geared Power 142 325 5,200 17,300
SPECIALIST PUMPS
Multi Stage - Radially Split Diffuser Pump HPRO 2,500 11,000 800 2,660
Submersible Motor Driven Pump Ulectriglide 3,400 15,000 200 670
Concrete Volute Pump CR 120,000 530,000 70 230
Inta
ke P
um
ps
Boost
er P
um
ps
HP
Pum
ps
HP
Boost
er (
ERP)
2nd P
ass
Pum
p
Brine
Pum
p
Produce
d W
ater
Pu
mp
Flus
hing
& C
lean
ing
USGPMKEY DESALINATION PRODUCT TYPES
M3/HRCUPDESIGNATION
FLOWS UP TOM FTHEADS UP TO
CLYDEUNION PUMPS WATER & INDUSTRIAL 13CLYDEUNION PUMPS WATER & INDUSTRIAL 13
SINGLE & TWO STAGE PUMPSSingle Stage End Suction Pump Isoglide 1,000 4,400 200 670
Single Stage Large End Suction Pump Aquaglide 10,000 44,000 200 670
Single Stage End Solids Handling Pump Swallowglide 30,000 130,000 130 430
Single Stage Axially Split Between Bearings Pump Uniglide 4,000 17,600 200 670
Two Stage Axially Split Between Bearings Pump Duoglide 1,350 5,950 275 910
Single Stage API End Suction Pump CUP-OH2 1,635 7,200 400 1,310
Single Stage API Vertical In-line Pump OH3 1,365 6,000 305 1,000
Single Stage API Vertical In-line Pump OH4 1,365 6,000 335 1,100
Single Stage API Vertical In-line Pump OH5 2,000 8,800 230 770
Single / Two Stage API Axially Split Between Bearings Pump BB1 20,000 88,000 1,000 3,300
Single Stage Sump Pump CUP-VS4 900 4,000 150 500
Single / Two Stage Vertical Bowl / Turbine Pump CW 40,000 176,000 100 330
Single Stage Vertical In-line Pump VCM 410 1,800 150 500
MULTISTAGE PUMPS
Multi Stage Vertical Bowl / Turbine Pump SBWM 40,000 176,000 100 320
Multi Stage Through Bolt Radially Split Pump FT 1,800 7,950 3,500 11,600
Multi Stage Barrel Radially Split Pump FK 2,500 11,000 4,000 13,300
Multi Stage API Axially Split CUP-BB3 2,500 11,000 3,000 9,960
Multi Stage API Vertical Diffuser / Turbine Single Case Pump VS1 7,000 31,000 600 1,900
Multi Stage API Vertical Diffuser / Turbine Double Case Pump VS6 7,000 31,000 600 1,900
RECIPROCATING PUMPSPower Driven Small (Single Acting Plunger) - Simplex/Duplex/Triplex
Small Power 17 75 6,900 23,00
Power Driven Medium (Single Acting Plunger) - Triplex/Quintex
Medium Power 87 385 6,900 23,00
Power Driven Large (Single Acting) - Triplex/Quintex Large Power 146 645 6,900 23,00
Power Driven Geared (Internally Geared) Geared Power 142 325 5,200 17,300
Power Driven High HP (Single Acting Plunger) - Triplex/Quintex
High Horse Power
155 680 13,800 20,000
Steam Driven Simplex (Direct Acting) Simplex Direct Acting
160 705 6,900 23,000
Steam Driven Duplex (Direct Acting) Duplex Direct Acting
173 760 6,900 23,000
SPECIALIST PUMPS
Positive Displacement Crew Pump IMO 1,800 7,950 3,500 11,600
Multi Stage Radially Split Diffuser Pump HPRO 2,500 11,000 800 2,660
Cryogenic Multi Stage Vertical Pump Cryogenic DB62 C
2,500 11,000 400 1,310
Submersible Motor Driven Pump Ulectriglide 3,400 15,000 200 670
Concrete Volute Pump CR 120,000 530,000 70 230
Integral Steam Turbine Water Lubricated Pump TWL 350 1,550 1,200 3,990
USGPMKEY INDUSTRIAL PRODUCT TYPES
M3/HRCUPDESIGNATION
FLOWS UP TOM FTHEADS UP TO
Chem
ical
Ext
ract
ion
Coal
Pro
cess
ing
Ele
ctro
nic
s
Food &
Bev
erag
es
Gas
/LN
G P
lants
Gen
eral
Indust
ry
Mar
ine
Min
ing
Pulp
& P
aper
Petr
och
emic
al
Ste
el P
roduct
ion
1414
Our after sales support extends acrossall of our legacy brands as well as newequipment, and we provide full backupfor obsolete products and for thirdparty equipment. The parts we supplymeet the original specification, or areupgraded were appropriate, and manycomponents can be covered by ourRapid Response option which canhave parts on site within 24 hours.
CLYDEUNION spares are subject tothe same supply chain managementas our pump manufacturing, to providecustomers with the lowest lead timesand costs while meeting the higheststandards of quality assurance.
In addition to spares parts, routineservicing and overhauls and inventorycontrol, our aftermarket support coversupgrades and comprehensive technicaladvice about the potential refittingof existing installations for greaterefficiency and reliability. We can workwith your own engineers to carry outmeticulous inspections and adviseon maintenance schedules, carry outfull vibration analysis, pressure andpulsation testing, and train yourservice personnel.
Our history and breadth of experience,and our geographical coverage andexpertise, make us the natural first choicefor any pump-related problem or inquiry,no matter what the location, the scaleof the task or the original manufacturer.
Lifetime worldwide support
Parts: Any brand, any material, anytime.We supply parts for all of our heritage brandsas well as upgrades and improvements.
Installation and commissioning: Trouble free commissioning anywhere in the world.
Every product we supply is supported bya full lifetime commitment. We will providea full aftermarket service, drawing on eitherour own engineers or our fully trained and highlyexperience service partners, depending on thelocation of the installation. We have servicefacilities in over 40 countries spread throughoutEurope, America, Asia, the Middle East and Africa.
CLYDEUNION PUMPS CONVENTIONAL POWER
Parts: Any brand, any material, anytime. We supply parts for all of our heritage brands as well as upgrades and improvements.
Our after sales support extends acrossall of our legacy brands as well as new equipment, and we provide full backup for obsolete products and for third party equipment. The parts we supply meet the original specification, or are upgraded where appropriate, and many components can be covered by ourRapid Response option which can have parts on site within 24 hours.
CLYDEUNION Pumps are subject to the same supply chain management as our pump manufacturing, to provide customers with the lowest lead times and costs while meeting the highest standards of quality assurance.
Every product we supply is supported by a full lifetime commitment. We will provide a full aftermarket service, drawing on either our own engineers or our fully trained and highly experienced service partners, depending on the location of the installation. We have service facilities in over 40 countries spread throughout Europe, America, Asia, the Middle East and Africa.
In addition to spare parts, routine servicing and overhauls and inventory control, our aftermarket support covers upgrades and comprehensive technical advice about the potential refitting of existing installations for greater efficiency and reliability. We can work with your own engineers to carry out meticulous inspections and advise on maintenance schedules, carry out full vibration analysis, pressure and pulsation testing, and train your service personnel.
Our history and breadth of experience, and our geographical coverage and expertise, make us the natural first choice for any pump related problem or enquiry, no matter what the location, the scale of the task or the original manufacturer.
Installation and commissioning: Trouble free commissioning anywhere in the world.
Lifetime worldwide support
14
Our after sales support extends acrossall of our legacy brands as well as newequipment, and we provide full backupfor obsolete products and for thirdparty equipment. The parts we supplymeet the original specification, or areupgraded were appropriate, and manycomponents can be covered by ourRapid Response option which canhave parts on site within 24 hours.
CLYDEUNION spares are subject tothe same supply chain managementas our pump manufacturing, to providecustomers with the lowest lead timesand costs while meeting the higheststandards of quality assurance.
In addition to spares parts, routineservicing and overhauls and inventorycontrol, our aftermarket support coversupgrades and comprehensive technicaladvice about the potential refittingof existing installations for greaterefficiency and reliability. We can workwith your own engineers to carry outmeticulous inspections and adviseon maintenance schedules, carry outfull vibration analysis, pressure andpulsation testing, and train yourservice personnel.
Our history and breadth of experience,and our geographical coverage andexpertise, make us the natural first choicefor any pump-related problem or inquiry,no matter what the location, the scaleof the task or the original manufacturer.
Lifetime worldwide support
Parts: Any brand, any material, anytime.We supply parts for all of our heritage brandsas well as upgrades and improvements.
Installation and commissioning: Trouble free commissioning anywhere in the world.
Every product we supply is supported bya full lifetime commitment. We will providea full aftermarket service, drawing on eitherour own engineers or our fully trained and highlyexperience service partners, depending on thelocation of the installation. We have servicefacilities in over 40 countries spread throughoutEurope, America, Asia, the Middle East and Africa.
CLYDEUNION PUMPS CONVENTIONAL POWER
clydeunion.com/nuclear-power-overview
* This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
I nnovation in des ign, world class manufacture, full a ftermarket servicesP um ps a nd a nc i l la r y equ ipm en t fo r tom or r ow ’s ene r gy needs
}
Worldwide sa les contacts
CLYDEUNI ON PumpsTel: +(44) 141 637 7141Fax: +(44) 141 637 7358Email: [email protected]
* Weir Pumps , Mather & Pla tt,Drysda le, WH Allan, G irdles tone,
Allen Gwynnes and Harland
Union Pump, Dav id B rown Pumps ,DB Guinard Pumps , American
Pump and Pumpline
EUROPE• • • Annecy: T . + ( 33) 45 005 560 F . + ( 33) 45 005 560 E . annecy@ clydeunion. com• • • Penistone, UK : T . + ( 44) 122 676 3311 F . + ( 44) 122 676 6535 E . penistone@ clydeunion. com• • • Glasgow, UK : T . + ( 44) 141 637 7141 F . + ( 44) 141 637 7358 E . glasgow@ clydeunion. com• Nordic Countries : T . + ( 47) 815 310 02 F . + ( 47) 815 310 03 E . nordic@ clydeunion. com• Moscow: T . + ( 7) 495 967 3453 F . + ( 7) 495 785 0636 E . moscow@ clydeunion. com
AMER I CAS• • Baton Rouge, LA: T . + ( 1) 225 775 2660 F . + ( 1) 225 778 0212 E . batonrouge@ clydeunion. com• • • Battle Creek, MI : T . + ( 1) 269 966 4600 F . + ( 1) 269 962 3534 E . battlecreek@ clydeunion. com• • • Burlington, ON: T . + ( 1) 905 315 3800 F . + ( 1) 905 335 8262 E . burlington@ clydeunion. com• • Calgary, AB : T . + ( 1) 403 236 8725 F . + ( 1) 403 236 7224 E . calgary@ clydeunion. com• • Downey, CA: T . + ( 1) 562 622 2380 F . + ( 1) 562 622 2375 E . downey@ clydeunion. com• • Houston, TX: T . + ( 1) 281 372 5040 F . + ( 1) 281 372 5042 E . houston@ clydeunion. com• • I tapira , S P: T . + ( 55) 19 3843 2520 F . + ( 55) 19 3843 2531 E . brasil@ clydeunion. com
• S alt Lake City, UT: T . + ( 1) 801 292 7882 F . + ( 1) 801 292 7885 E . saltlake@ clydeunion. com
AS I A• Beijing: T . + ( 86) 106 598 9500 F . + ( 86) 106 598 9505 E . beijing@ clydeunion. com• • • New Delhi: T . + ( 91) 120 4640 400 F . + ( 91) 120 4640 401 E . newdelhi@ clydeunion. com• • • S hanghai: T . + ( 86) 216 160 6969 F . + ( 86) 216 160 6968 E . shanghai@ clydeunion. com• S ingapore: T . + ( 65) 62 76 7117 F . + ( 65) 62 78 7117 E . s ingapore@ clydeunion. com
MIDDLE EAS T & AFR I CA• • UAE: T . + ( 97) 12 631 1959 F . + ( 97) 12 635 1242 E . uae@ clydeunion. com• Algeria : T . + ( 213) 21 69 2319 F . + ( 213) 21 69 3046 E . algeria@ clydeunion. com
SALES AFTERMARKET MANUFACTUR I NG
clydeunion.com/nuclear-power-overview
clydeunion.com/nuclear-power-overview
Worldwide sales contacts clydeunion.com/water-industrial-overview
*This is a heritage product acquired when the Weir Pumps business transferred to Clyde Pumps in May 2007.
We are constantly endeavouring to improve the performance of our equipment and as a result, we reservethe right to make alterations from time to time, and equipment may differ from that detailed in this brochure.
CU 30Copyright: © CLYDEUNION Ltd, 2009 UK.
Innovation, Design, Manufacture & Aftermarket Services:Pumping solutions for a better world
clydeunion.com/conventional-power
}
Worldwide sales contactsclydeunion.com/conventional-power
CLYDEUNION PumpsTel: +(44) 141 637 7141Fax: +(44) 141 637 7358Email: [email protected]
*Weir Pumps, Mather & Platt,Drysdale, WH Allen, Girdlestone,
Allen Gwynnes and Harland
Union Pump, David Brown Pumps,DB Guinard Pumps, American
Pump and Pumpline
EUROPE• • • Annecy: T. +(33) 45 005 5600 F. +(33) 45 005 5880 E. [email protected]• • • Penistone, UK: T. +(44) 122 676 3311 F. +(44) 122 676 6535 E. [email protected]• • • Glasgow, UK: T. +(44) 141 637 7141 F. +(44) 141 637 7358 E. [email protected]• Nordic Countries: T. +(47) 815 310 02 F. +(47) 815 310 03 E. [email protected]• Moscow: T. +(7) 495 967 3453 F. +(7) 495 785 0636 E. [email protected]
NORTH AMERICA• • Baton Rouge, LA: T. +(1) 225 775 2660 F. +(1) 225 778 0212 E. [email protected]• • • Battle Creek, MI: T. +(1) 269 966 4600 F. +(1) 269 962 3534 E. [email protected]
• Bethlehem, PA: T. +(1) 866 224 4787 F. +(1) 610 746 5907 E. [email protected]• • • Burlington, ON: T. +(1) 905 315 3800 F. +(1) 905 335 8262 E. [email protected]• • Calgary, AB: T. +(1) 403 236 8725 F. +(1) 403 236 7224 E. [email protected]• • Downey, CA: T. +(1) 562 622 2380 F. +(1) 562 622 2375 E. [email protected]• • Houston, TX: T. +(1) 281 372 5040 F. +(1) 281 372 5042 E. [email protected]
• Salt Lake City, UT: T. +(1) 801 292 7882 F. +(1) 801 292 7885 E. [email protected]
SOUTH AMERICA• • • Itapira, SP: T. +(55) 19 3843 2520 F. +(55) 19 3843 2531 E. [email protected]
ASIA• Beijing: T. +(86) 106 598 9500 F. +(86) 106 598 9505 E. [email protected]• • • New Delhi: T. +(91) 120 4640 400 F. +(91) 120 4640 401 E. [email protected]• • • Shanghai: T. +(86) 216 160 6969 F. +(86) 216 160 6968 E. [email protected]• Singapore: T. +(65) 62 76 7117 F. +(65) 62 78 7117 E. [email protected]
MIDDLE EAST & AFRICA• • UAE: T. +(97) 12 631 1959 F. +(97) 12 635 1242 E. [email protected]• Algeria: T. +(213) 21 69 2319 F. +(213) 21 69 3046 E. [email protected]
SALES AFTERMARKET MANUFACTURING
CU 32Copyright: © CLYDEUNION Ltd, 2010 UK
CLYDEUNION Pumps
Tel: +(44) 141 637 7141
Fax: +(44) 141 637 7358
Email: [email protected]
www.clydeunion.com