NOMINAL SIZECONVERTING

LINEAL TO BOARD MEASURE FACTOR

CONVERTING LINEAL PRICING TO BOARD FT PRICING

CONVERTING BOARD MEASURE TO LINEAL FACTOR

CONVERTING BOARD FT PRICING TO LINEAL PRICING

FACTOR

1x2 0.167 6.000 6.000 0.1671x3 0.250 4.000 4.000 0.2501x4 0.333 3.000 3.000 0.3331x6 0.500 2.000 2.000 0.5001x8 0.667 1.500 1.500 0.667

1x10 0.833 1.200 1.200 0.8331x12 1.000 1.000 1.000 1.0002x2 0.333 3.000 3.000 0.3332x3 0.500 2.000 2.000 0.5002x4 0.667 1.500 1.500 0.6672x6 1.000 1.000 1.000 1.0002x8 1.333 0.750 0.750 1.333

2x10 1.667 0.600 0.600 1.6672x12 2.000 0.500 0.500 2.0005/4x2 0.208 4.800 4.800 0.2085/4x3 0.313 3.200 3.200 0.3135/4x4 0.417 2.400 2.400 0.4175/4x6 0.625 1.600 1.600 0.6255/4x8 0.833 1.200 1.200 0.833

5/4x10 1.042 0.960 0.960 1.0425/4x12 1.250 0.800 0.800 1.250

4x4 1.333 0.750 0.750 1.3334x6 2.000 0.500 0.500 2.0004x8 2.667 0.375 0.375 2.667

4x10 3.333 0.300 0.300 3.3334x12 4.000 0.250 0.250 4.0006x6 3.000 0.333 0.333 3.0008x8 5.333 0.188 0.188 5.333

PRODUCT NOMINAL SIZELINEAL FOOTAGE

PER SQUAREBOARD FOOTAGE

PER SQUARE1x4 366 1221x6 234 1171x8 177 118

1x10 140 1161x12 115 1151x4 408 1361x6 250 1251x8 186 124

1x10 145 1211x12 118 1181x6 254 1271x8 204 136

1x10 155 1291x12 125 1255/4x6 248 1552x6 248 248

LOG CABIN 2x8 187 249

DECKING

FPG CONVERSION ESTIMATOR

FPG CONVERSION CHART

S4S

SHIPLAP/T&G

BEVEL SIDING

INVENTORY CATALOG Specializing in Wholesale Distribution Since 1960

this is a complete list of products FPG carries, some are regional and may not be available in your area

General Manager Heath Smith 937-313-2778 heath.smith@forestproductsgroup.com

Frankfort, Indiana 800-875-4374 Fax 765-659-4953

Outside Sales – Indiana: John Morris 765-427-8683 jmorris@forestproductsgroup.com John Benner 765-656-4103 jbenner@forestproductsgroup.com Inside Sales – Indiana

Brad Compton 800-875-4374 bcompton@forestproductsgroup.com Thaya Sterrett 800-875-4374 tsterrett@forestproductsgroup.com

Piqua, Ohio 800-686-9595 Fax 937-773-8566 Outside Sales – Ohio: Dean Newman 614-327-3657 dnewman@forestproductsgroup.com Jim Tabler 937-541-1014 jtabler@forestproductsgroup.com John Kaeck 937-248-5787 jkaeck@forestproductsgroup.com Inside Sales – Ohio

Chad Smith 800-686-9595 csmith@forestproductsgroup.com Colin Spruance 800-686-9595 cspruance@forestproductsgroup.com

Kings Mountain, North Carolina 855-239-2310 Fax 704-730-7853 Outside Sales – North Carolina Chad Crouse 980-552-7003 cc@forestproductsgroup.com Inside Sales – North Carolina Tommy Grubaugh 704-730-7804 tgrubaugh@forestproductsgroup.com

Engineered Wood Products 800-686-9595 Fax 937-773-8566 Engineered Wood Manager Brad Smith 937-418-4366 brad.smith@forestproductsgroup.com

EWP Designers Allyson Janson 800-686-9595 a.janson@forestproductsgroup.com Ian Redd 800-686-9595 iredd@forestproductsgroup.com Charlie Hess 800-686-9595 chuck@forestproductsgroup.com

WESTERN RED CEDAR BOARDS Its natural resistance to decay and moisture makes Western Red Cedar the best natural choice for Trim. 3/4"x4” thru 12” Appearance Grade S1S2E 7/8”x4” thru 12” #3&Btr Two Face S1S2E 7/8”x4” thru 12” #3&Btr Two Face S1S2E Primed 5/4”x4” thru 12” Appearance Grade S1S2E

HAIDA WESTERN RED CEDAR SIDINGS

Haida Western Red Cedar Sidings are one of the oldest, most well respected brands offering unique curb appeal. 15/16”x10” STK Haida Skirl 15/16”x12” STK Haida Skirl 7/8”x8” STK Haida Bevel

CEDAR SELECT TIGHT KNOT SIDINGS 6” STK Bevel Siding 8” STK Bevel Siding 10” STK Bevel Siding 8” STK Bevel Siding Primed 1”x6” STK Reversible T&G 1”x8” STK Reversible T&G 1”x8” STK Channel Rustic 1”x10” STK Channel Rustic

WESTERN RED CLEAR CEDAR SIDINGS 1/2”x6” Clear Bevel Siding 1/2"x8” Clear Bevel Siding 1”x6” Clear V4E

WESTERN RED SPECIALTIES 2”x2”x8’ Clear S4S 1”x4” thru 12” Clear S4S 2”x4” thru 12” Clear S4S 4”x4”x8’-10’ Clear S4S

WESTERN RED CEDAR SHAKES & SHINGLES 1/2” x 24” Medium Handsplit #1 Shakes 3/4” x 24” Heavy Handsplit #1 Shakes 5/8” x 24” Tapersawn #1 Hip & Ridge #1 VG Sidewall Shingles 18” Random widths Reversible Grooved / Resawn 14” exposure 1 box per square 7” exposure 2 boxes per square #2 16” Cedar Shingle

.

CEDAR FENCE BOARDS 1”x6”x4” #2 No Hole (Dog Eared) 1”x6”x6” #2 No Hole (Dog Eared) 1”x6”x8” #2 No Hole (Dog Eared) 1”x6”x8” #2 No Hole (Flat Top)

WESTERN RED CEDAR DECKING 5/4”x6” Architectural Knotty S4S 2”x4” Architectural Knotty S4S 2”x6” Architectural Knotty S4S 4”x4” Architectural Knotty S4S 2”x2”x96” Architectural Knotty S4S 2”x2”x42” Mitred one end S4S

CEDAR DIMENSION AND TIMBERS 2”x4” thru 2”x12” Appearance Grade Rough 4”x4” thru 4”x12” Appearance Grade Rough 6”x6” thru 12”x12” Appearance Grade Rough Call for the availability on long lengths

FACTORY APPLIED PRE-FINISHING Professionally applied factory pre-finishing available for all sidings and trim. Call FPG for details.

MILLING and SURFACING SERVICES Forest Products Group offers special order custom milling services for those hard to find wood profiles, as well as surfacing rough timber. Call FPG for details.

FIR TIMBERS

4”x4” thru 4”x12” Appearance Grade Rough 6”x6” thru 12”x12” Appearance Grade Rough

REDWOOD PRODUCTS 1”x4” thru 1”x12” Clear S4S Boards 2”x4” thru 2”x12” Clear S4S Boards 1/2"x6” Clear Reversible Bevel 1/2"x8” Clear Reversible Bevel 1”x6” Pattern 711/R Clear

REDWOOD CLEAR PRIMED FINGERJOINT 3/4”x4” thru 3/4”x12” S1S2E 16’ plus Trims 5/4”x4” thru 5/4”x12” S1S2E 16’ plus Trims 1/2”x6” Bevel Siding 16’ plus Trims 1/2"x8” Bevel Siding 16’ plus Trims

2x6 PinePro Decking Center Match

1x4 or 1x6 SYP Flooring/Ceiling

1x6 or 1x8 PinePro 116/WP-4

2x8 Pine Log Siding (Smooth/Hand Hewn)

1x6 PinePro 106/Beaded

1x6 PinePro 104/WP-4

1x6 or 1x8 PinePro Shiplap/Nickle Gap

1x6 Edge & Center Bead/WP-4

1x6, 1x8, or 1x10 Cedar Bevel Siding1x6 or 1x8 CedarPro WP-4

1x8 or 1x10 CedarPro Channel Rustic

Common patterns stocked at FPG. Exact dimensions may vary slightly and additional patterns offered.

ENGINEERED WOOD PRODUCTS

***Forest Products Group will be a full-line, full service International Beam EWP distributor in the North Carolina, South Carolina and Atlanta, Georgia markets shortly.

Forest Products Group, Inc. is a leader of Boise Cascade engineered wood products.

FPG has many years of experience servicing retail lumber yards. We offer plan design, job cutting and packaging and jobsite delivery.

We specialize not only in residential design, but also commercial design. Products are sold in direct truck loads, full units and job packs.

I-JOIST

BCI 4500 - 11-7/8”, 14” 1-3/4” LVL Flange BCI 5000 - 9-1/2”, 11-7/8”, 14” 2” LVL Flange AJS 150 - 11-7/8” 2-1/2” Solid Wood Flange

AJS 20 - 9-1/2”, 11-7/8”, 14”, 16” 2-1/2” Solid Wood Flange AJS 24 - 11-7/8”, 14”, 16” 3-1/2” Solid Wood Flange AJS 25 - 11-7/8”, 14”, 16” 3-1/2” Solid Wood Flange

***Deeper joist available by special order

FIRE RESISTANT I-JOIST FMJ 24 - 9-1/2”, 11-7/8”, 14” 16” 3-1/2” Solid Wood Flange

LVL

2.0e 3100fb 1-3/4” X 7-1/4”, 9-1/4”, 9-1/2”, 11-1/4”, 11-7/8”, 14”, 16”, 18”, 20”, 24”

1.7e 2650fb 1-3/4” X 9-1/2”, 11-7/8”, 14”

1-1/2” X 9-1/2”, 11 7/8”, 14”

1” & 1-1/8”x12’ Rim Board

9-1/2”, 11-7/8”, 14”, 16”

PinePro is graded to standards for premium quality and performance in tight-knotted common lumber. 1”x6” Pattern 116/WP4 Select Knotty 1”x8” Pattern 116/WP4 Select Knotty 1”x6” Shiplap Nickel Gap/SE Select Knotty 1”x8” Shiplap Nickel Gap/SE Select Knotty 1”x6” Beaded Ceiling/Cove Patt 106 Select Knotty 1”x6” Pattern 104/WP4 Select Knotty 2”x6” Center Match Decking Select Knotty PINEPRO LOG CABIN SIDING 2”x8” Smooth Round with Chink line 2”x8” Hand Hewn Log

WYNNDEL PREMIUM ESLP EASED EDGE BOARDS Fine grained high-elevation spruce surfaced with a high speed moulder to give a fresh smooth face.

1”x4” thru 1”x12” Appearance grade S4SEE

PONDEROSA PINE BOARDS 1”x4” thru 1”x12” #2&BTR S4S 1”x4” thru 1”x12” #3 S4S

EURO SPRUCE BOARDS 1”x4” thru 1”x12” #2&BTR S4S 1”x6”x16’ #2&BTR Beaded/WP4

SOUTHERN PINE BOARDS & PATTERNS 1”x4” thru 1”x12” C&BTR S4S 1”x4” C&BTR Flooring/Beaded Ceiling 1”x6” C&BTR Flooring/Beaded Ceiling 1”x4” thru 1”x12” #2&BTR S4S 1”x6” #2&BTR Beaded/WP4 2”x6” #2&BTR Center Match Decking

FPG SUPER STRIPS 1”x2”x8’ 1”x3”x8’ 2”x2”x8’

SPRUCE STRIPPING AND BRIDGING 1”x2”x8’ 1”x3”x8’ 2”x2”x8’ 16” OC Bridging produced for 2x8-2x10-2x12 Cedar Builder Shims 42

REALPOST by WOODTONE RealPost offers the advantage of an engineered component, utilizing 4 pieces of kiln dried finger-jointed lumber in conjunction with a lock mitre joint, at a discount to conventional cedar posts. Each piece is primed to ensure instant curb appeal and performance. 4”x4” 10’ Primed 6”x6” 8’, 9’ & 10’ Primed 8”x8” 9’ & 10’ Primed 6”x6” 10’ Raw Cedar 8”x8” 10’ Raw Cedar

REALTRIM PLUS by WOODTONE Primed KD SPF S1S2E boards, backed by a 15 year substrate warranty. 3/4”x4” thru 3/4”x12” 16’ 5/4”x4” thru 5/4”x12” 16’

RealSoffit™ is now offered in six pre-finished colors for both interior and exterior applications. Manufactured from appearance grade Engelmann Spruce/Lodgepole Pine, RealSoffit™ is available as 1”x6” End-Matched Traditional Tongue & Groove V-Joint boards. FPG stocks 12’ lengths in the following colors: English Porter, Honey Brown, Nut Brown, Irish Stout, White Ale, and Ice Lager. *** PRODUCT ANNOUNCEMENT *** RealSoffit™ is now being offered in a Fineline Nickel Gap T&G profile. 1”x6”x16’ available in six colors: Crystal Gin, Irish Cream, Smokey Bourbon, Single Malt, Reserve Cognac, and Vintage Port.

RADIATA CLEAR PRIMED FINGERJOINT

3/4”x4” thru 3/4”x12” S4S 16’ 5/4”x4” thru 5/4”x12” S4S 16’ 3/4”x6” Edge&Center Bead/WP4 16’

PLYWOOD SIDINGS

3/8” 4’x8’ Primed Fir 3/8” 4’x8’ Breckenridge 3/8” 4’x8’ Radiata Pine

FPG offers the complete line of both LP Smart Fiber and Smart Strand products. 5/50 year limited warranty. FPG has the availability of Twelve LP SmartSide basic colors

and custom colors available.

LP SMART STRAND *** PRODUCT ANNOUNCEMENT *** FPG is now stocking the new 3/8”x16”x16’ Vertical Siding for Board and Batten Applications Smart Strand Trim 16’

3/4"x2” thru 3/4”x12” 5/4”x4” thru 5/4”x12” Smart Lap Siding 16’

3/8”x6” thru 3/8”x12” Smart Strand 3/8” Soffit 4’x8’ Textured/Smooth 16’ Vented 12” 16” 24” 16’ CTW 12” 16” Smart Strand Panel Sidings

3/8”x4’x8-9-10’ 8” OC 7/16”x4’x8-9-10’ 8” OC 7/16”x4’x8’ 4” OC 7/16”x4’x8-9-10’ no groove ship lap

LP SMART FIBER Fiber Trim Reversible 16’ 3/4"x4” thru 3/4”x16” 5/4”x4” thru 5/4”x12” Fiber Lap Siding 16’ 7/16”x8” Colonial Bead Textured/Smooth 7/16”x8” thru 12” Textured/Smooth Lap 1/2"x12" Triple 4 Lap Fiber Cedar Shakes

7/16”x12”x4’ Reversible Cedar Shake Panels 3/8”x8”x4’ Perfection Shingle Panels Fiber Panels

7/16”x4’x8-9’ Stucco 7/16”x4’x8-9’ 8” OC Textured Fiber Soffit Panels

7/16”x4’x8’ Textured/Smooth.

Kleer trims & mouldings are made of rigid PVC

that looks, feels and works like wood. These can be used in exterior and interior applications, and also has a lifetime warranty. Kleer Reversible Trim Boards 18’

3/4"x4” thru 3/4"x12” 5/4”x4” thru 5/4”x12” Kleer Start Woodgrain and Smooth

3/4"x5-1/2”x18’ Kleer Crown Mouldings 16’ 9/16”x2-3/4” 11/16”x3-5/8” 11/16”x4-5/8” 9/16”x5-1/4” Kleer Mouldings 16’

11/16”x1-1/8” Base Cap 11/16”x1-5/8” Shingle Band 13/16”x1-1/8” Wainscot Cap 9/16”x1-9/16” Bed 11/16”x1-5/8” Drip Cap 1-1/2”x1-1/4” Sill Nosing 1-1/4”x2”x17’ Brick 3/4"x3/4” Qtr Round 3/4"x3/4” Cove 1-1/16”x2” Rake Kleer Panels / Sheets

Reversible Sheets 3/8”x4’x8’ 1/2”x4’x8’ 3/4”x4’x8’-10’ 1/2"x6” KleerLoc Rev T&G 2 1/2” OC 16’ Kleer Snap Posts Wraps

4”x4”x10’ 6”x6”x10’ 8”x8”x10’ Base and Cap Kit 4”x4” 6”x6” 8”x8” Kleer Konceal Corner Boards

1”x3-1/2”x20' Woodgrain Corner Board 1”x3-1/2”x20' Woodgrain Konceal Corner 1”x5-1/2”x20' Woodgrain Corner Board 1”x5-1/2”x20' Woodgrain Konceal Corner

Allura fiber cement sidings come 12’ in length. Primed on all 6 sides Allura is backed with a 50 year warranty. Allura Lap 5/16” Cedar & Smooth 5-1/4” 6-1/4” 7-1/4” 8-1/4” 9-1/4” 12” Allura MultiShake 1/4” Cedar & Combed 16”x48” Straight Cedar 16”x48” Staggered Cedar 16”x48” Half Round Allura Soffit 1/4” Cedar & Smooth 12”x12’ Non Vented 12”x12’ Vented 16”x12’ Non Vented 16”x12’ Vented 4’x8’ Sheets Allura Panels 5/16” 4’x8-10’ 8” OC groove Traditional Cedar Smooth Stucco Allura Shingle 1/4” RW 18” Cedar and Combed

Plycem fiber cement trim boards come 12’ in length. Plycem is a reversible smooth/textured product with machined square edges to ensure a clean look. Primed on all 6 sides Plycem is backed with a 50 year warranty. 3/4”x2” thru 12” 5/4”x4” thru 12”

FPG stocks the Titan and Endurance series in white only. The complete RDI color line is available in the Endurance, Metal Works and Avalon Series.

ARMADILLO BY AVON PLASTICS Armadillo Lifestyles FPG Stocks six colors: Campfire, Vintage Slate, Canyon Gray, Painted Desert, Rustic Red & Tumbleweed. 5/4”x6” Solid 16’ 5/4”x6” Grooved 12’ 16’ & 20’ 3/4”x8”x12’ Riser 3/4"x12”x12’ Fascia Also available are Armadillo Impressions, which gives the distressed appearance of a hand scraped surface. Available in three colors: Java, Night Fall and Palomino Available accessories: Deck Clips and End Board sealer.

***New Product Announcement*** Armadillo is

now offering Post Sleeves, Caps and Skirts in White, Black and Brown along with 2”x4”x12” Handrail in all Armadillo colors.

KWP is a leading manufacturer and distributor of engineered wood siding and trim boards. All KWP products are backed by a 50/25 year warranty. That’s 50 years on the substrate and 25 years on the finish. FPG stocks the primed products. KWP offers 23 distinctive colors which are available on request. Primed Woodgrain Trim 12’ 3/4"x4” thru 3/4”x12” 5/4”x3” thru 5/4”x12” Primed Woodgrain Lap Siding 12’

3/8”x6” thru 8” 1/2"x12” Double 5 Dutchlap 1/2"x12” Double 5 Vertical 1/2"x5” V-joint Siding/Soffit 1/2”x9” V-joint Interlock Primed Woodgrain Shakes 1/2”x8”x4’ Straight shakes 1/2”x15”x4’ Staggered shakes Primed Woodgrain Panel 3/8”x4’x8’ & 12’ Outside Woodrain Corners 10’

5/4”x4-5-6”