Inland fishing craft and gears

65
INLAND FISHING CRAFTS AND GEARS 1

Transcript of Inland fishing craft and gears

Page 1: Inland fishing craft and gears

1

INLAND FISHING CRAFTS AND GEARS

Page 2: Inland fishing craft and gears

2

CRAFTS

Page 3: Inland fishing craft and gears

3

INLAND CRAFTS FEATURES

Light, small with shallow draftMajority are indigenous and on mechanized. 1. rafts2. dug outs3. Plank built boats4. Flat bottom n round bottom5. Outrigger canoes6. Built up canoes7. Tin boats

INLAND FISHING CRAFTS

Shallow & protected

Fishing grounds nearer to landing centresComprise-Back waters, Reservoirs, Rivers, Lakes

IMPORTANT CRAFTS

Page 4: Inland fishing craft and gears

4

• Dominant in South Indian reservoirs• Consists of a very large wide mouthed circular

flat bottomed basket, sides comparatively low• A hide stretched outside & firmly tied to

exclude water• Gill nets, shore seines, longlines operated• Manned by 2 fishermen• Gill nets are commonly done, 4-5 nets

operated from each coracle• Conspicuous in Tungabhadra(KAR), Mettur(TN),

Nagarjunasagar (AP) reservoirs

CORACLE

Page 5: Inland fishing craft and gears

5

CORACLE

Page 6: Inland fishing craft and gears

6

Page 7: Inland fishing craft and gears

7

FLOAT WITH SEALED TINS

• Empty kerosene sealed tins are improvised to make floats, they are enclosed in gunny bags/tied with planks/ropes

• Reservoirs of Maharashtra (Yaldari & Ujjani), A.P.(Hussainsagar n Nagarjunasagar) , Karnataka (Tungabhadra reservoir)

Page 8: Inland fishing craft and gears

8

DRIED GRASS RAFT

• Made out of dried grass in triangular shape

• Cast nets and gill nets are operated• Used in Tungabhadra reservoir

Page 9: Inland fishing craft and gears

9

INFLATED RUBBER TUBES

• Inflated rubber tubes of motor vehicles used for fishing- Hussainsagar reservoir of A.P, reservoirs of Bilwara district of Rajastan

Page 10: Inland fishing craft and gears

10

Page 11: Inland fishing craft and gears

11

• Known as Teppa- Nizamsagar & Hussain sagar of A.P, Mettur reservoir & backwaters of Tamil Nadu.

• Locally called chalathadi in KeralaMade of 3-5 logs, tied with coir ropesPropulsion with split bamboo oars & sailsUsed in pairs to operate boat seines &

individually to operate longlines and for cast netting

CATAMARANS

Page 12: Inland fishing craft and gears

12

CATAMARANS

Page 13: Inland fishing craft and gears

13

Page 14: Inland fishing craft and gears

14

DONGA

• Made of wood.• As Common in other rivers of

Bihar,Uttar Pradesh and West Bengal ; Ganga(donga)

Page 15: Inland fishing craft and gears

15

Page 16: Inland fishing craft and gears

16

Special type of dug-out in Kolleru lake (A.P)

2 butt sections of palms r hollowed out on 1 side n lashed together parallel but at a distance apart by bamboo poles

Butt end being bulbous, craft extremely wide on 1 side n other end is truncated n narrow

SANGEDAM

Page 17: Inland fishing craft and gears

17

WOODEN RAFTS

1. PLANTAIN STEM5-6 Plantain stems are twisted, ends

trimmed, fastened together raft wise by thin strakes/skewer of wood(oblique) at each end.

Used in rivers of Bihar andTamil nadu2. CHETTY RAFTo earthen pot raft seen in Bihar, earthen pots

arranged in 3 rows in Tamil Nadu, earthen pots turned upside down and connected)

Page 18: Inland fishing craft and gears

18

• Flat bottom.• Flat bottom-ideal shape to maneuver

shallow waters many reservoirs of North Indian states• 5-6 logs made of locally available light

wood, tied by coconut plank poles, fastened by coir ropes

• Propulsion by paddles• Used for hook & line operation

Page 19: Inland fishing craft and gears

19

RAFT

Page 20: Inland fishing craft and gears

20

Page 21: Inland fishing craft and gears

21

ROUND, BOTTOM PLANK BUILT BOATS

a) BATCHARI-operated in rivers of W.B. Used for operation of drift nets, bag nets n dip nets in sea, rivers & estuaries. Found suitable for mechanization

b) CHOT- used for shore seine operation in Hooghly river, small lateen sail. Used for operating heavier gear like seine net & bag net

c) SALTI- hull oval in shape, operates set nets in creeks (Orissa-Balasore)

d) CHANDI- N. Orissa, W. B., to operate bag nets, seines & drift nets, seldom carries sail

e) MACHWA- for operating large nets in estuarine waters of Gujarat

Page 22: Inland fishing craft and gears

22

Page 23: Inland fishing craft and gears

23

MACHWA

Page 24: Inland fishing craft and gears

24

Ganges dinghi

• Constructed with planks, narrow tapering bow n stern, without keel ,rivers of W.B.

• For operating gill nets to catch hilsa

DINGHI

Page 25: Inland fishing craft and gears

25

WEST BENGAL

Page 26: Inland fishing craft and gears

26

UTTAR PRADESH

Page 27: Inland fishing craft and gears

27

• Shoe shaped with wide flat forward• sharp stem, strongly flared bow sections• narrows greatly in the aft , transom stern• fore part is decked, has spray board• steers by oar from aft deck• Special type of dug-out in Kolleru lake (A.P)

SHOE DHONI

Page 28: Inland fishing craft and gears

28

BUILT UP CANOES TIN BOATS

plank built boats in the shape of dug-out

Clinker built canoes-fishing in Pulicat lake & back waters of Madras

Large size carvel planked canoes-popular in Chilka lake-iron nails clinched on iron washers used to fasten planks

• Made out of tin• Reservoirs of U.P.,

Bihar and Rajastan• Provided with flat

bottom

CANOES

Page 29: Inland fishing craft and gears

29

DUG OUTS CANOES

• Commonly used for inshore marine operations in Karnataka and Kerala.

made by scooping out material from single large trunks of trees like aini, mango

Propulsion by sails and paddles No rudder used, steering by big paddles on

quarter sides Small & medium dug-outs used for gill nets

and lines• Similar type, but smaller ones used in

reservoirs of TN, MP, Bihar, Manipur & Tripura

Page 30: Inland fishing craft and gears

30

DUG OUT CANOE

Page 31: Inland fishing craft and gears

31

Page 32: Inland fishing craft and gears

32

Built with planks in the shape of a dug-out Wooden planks sewn with coir ropes A layer of black pitch applied inside to make

craft water tight Paddles for propulsion, occasionally sails are

used Operate seines & gill nets

PLANK BUILT {TONA VALLAM}

Page 33: Inland fishing craft and gears

33

TONA VALLAM

Page 34: Inland fishing craft and gears

34

TONA VALLAM

Page 35: Inland fishing craft and gears

35

Page 36: Inland fishing craft and gears

36

OUTRIGGER CANOES

• Used in Velar river near Port Nova in TN

• Usually small dug-out fitted with outrigger float boomed out by means of 2 poles at a distance from the canoe

• Used for operations of cast nets • Mast and sails not used

Page 37: Inland fishing craft and gears

37

Page 38: Inland fishing craft and gears

38

Page 39: Inland fishing craft and gears

39

Page 40: Inland fishing craft and gears

40

Page 41: Inland fishing craft and gears

41

GEARS

Page 42: Inland fishing craft and gears

42

In bag nets the fishes enter voluntarily and are caught by filtering. They are kept open vertically by a totally or partially framed mouth and horizontally by the current.

These are small bag nets operated by hand and or moved through the water i.e. the fishes are caught by the scooping action. They are variously shaped. They have almost round frame.

BAGNETS

SCOOPNET

Page 43: Inland fishing craft and gears

43

BAGNET

Page 44: Inland fishing craft and gears

44

SCOOP NET

Page 45: Inland fishing craft and gears

45

They are cast over the area where fishes are suspected to be found, then gathered and lifted to collect the fish. This is one of the most common gears used.

Its one of the most suitable fishing catch methods which is being widely used. The fishes are caught by gilling. Its best method from the conservation and stock regulation point of view. It’s a passive fishing method & can be operated even from the most primitive fishing crafts.

CAST NETS

GILL NETS

Page 46: Inland fishing craft and gears

46

CAST NET

Page 47: Inland fishing craft and gears

47

GILL NET

Page 48: Inland fishing craft and gears

48

DRIFT GILL NETS

These nets drift along with the currents and the winds .There is no anchor. They can be used in any layer of water. During operation one end is tied to a boat and the other end carries a marker buoy to help in the location of the net.

Page 49: Inland fishing craft and gears

49

SEINES

The manner of capture is to surround an area of water with a long net with or without a bag at the center. Two long ropes are tied to the ends of the net, which help in hurling the fish as well as the hauling. The gear is towed over the area with both ends fixed to a point on the shore or on a vessel. Seines which are operated from a boat are called BOAT SEINE.

Page 50: Inland fishing craft and gears

50

SIENE

Page 51: Inland fishing craft and gears

51

Page 52: Inland fishing craft and gears

52

LIFT NETS

• The method of capture in lift nets is by lifting the gear submerged at the required depth either by hand or mechanically from the shore or from a boat.

HAND LIFT NETS – Small lift nets are operated with hands with no fixed installations. Mostly used to catch crabs.

MECHANIZED LIFT NETS – Larger lift nets mostly mechanized installations situated along the shore.

CHINESE LIFT NESTS OPERATED ALONG THE KERALA BACKWATER IS A FAMOUS EXAMPLE OF MECHANIZED LIFT NETS.

Page 53: Inland fishing craft and gears

53

CHINESE DIP NET

Page 54: Inland fishing craft and gears

54

DRAG NETS

• This group includes active gears which are towed through water and manner of their capture is by filtration. The nets are either operated through a boat or in shallow waters.

• Its usually made of an oblong iron frame with an attached bagnet. Its mostly used to collect shell fishes.

Page 55: Inland fishing craft and gears

55

DRAG NET

Page 56: Inland fishing craft and gears

56

HOOK AND LINE

Fishes are lured by edible or artificial

baits or lure which stimulates the appearance and movement of the natural prey and are finally held by the hook on seine on the bait or lure. The hook is connected to a line or snood. The fish is also held by piercing action of hooks or jigs.

Page 57: Inland fishing craft and gears

57

HOOK AND LINE

Page 58: Inland fishing craft and gears

58

TRAPS• Traps are passive fishing gears with

enclosures to which the fishes are lured or guided and from which the escape is made difficult by means of labyrinths or retarding devices like funnels or constrictions.

• Pots are cages or baskets made from materials like wood, wicker, metal rods, wire nettings, and reinforced plastic designed to catch fish, crustaceans by enticing them with baits or shelter spaces.

• They are usually set on the bottom singly or in series by ropes and positions marked by buoys.

Page 59: Inland fishing craft and gears

59

Page 60: Inland fishing craft and gears

60

KOODU

Page 61: Inland fishing craft and gears

61

OTTAL

Page 62: Inland fishing craft and gears

62

TRAWLERS

• Trawls is a conical net consisting mainly of two panels – upper and lower panel. The belly is wide at the mouth and narrow towards the cod end.

• Trawling has been attempted only in two reservoirs in India ; Gandhi Sagar and Hirakud.

• Single Boat bottom Trawlers, Two Boat Bottom trawlers, Two boat mid water trawlers has been used.

Page 63: Inland fishing craft and gears

63

TRAWLER

Page 64: Inland fishing craft and gears

64

TRAWLER IN OPERATION

Page 65: Inland fishing craft and gears

65

Thank you