4 in 7.4 in 3.7 in

(100 mm) (187 mm) (93 mm)

4 in 7.4 in 3.7 in

(100 mm) (187 mm) (93 mm)

6 in 10.5 in 5.2 in

(150 mm) (266 mm) (133 mm)

6 in 10.5 in 5.2 in

(150 mm) (266 mm) (133 mm)

8 in 13.8 in 6.9 in

(200 mm) (350 mm) (175 mm)

8 in 13.8 in 6.9 in

(200 mm) (350 mm) (175 mm)

10 in 17.9 in 8.9 in

(250 mm) (454 mm) (227 mm)

10 in 17.9 in 8.9 in

(250 mm) (454 mm) (227 mm)

12 in 22.5 in 11.3 in

(300 mm) (572 mm) (286 mm)

12 in 22.5 in 11.3 in

(300 mm) (572 mm) (286 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST" HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT BELLS HAVE MOLDED CLEATS AND REQUIRE NO GASKET TO MAKE CONNECTION TO DUAL WALL PIPE. DRAWING #: 3000

DRAWN BY: JCB 07.28.06APPROVED BY: JCB 06.26.07

NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

1063WT

1264ST

1264WT

INJECTION MOLDED TEE

PIPE SIZE A JOINTPART #

4" - 12" DIAMETER

B

0460ST

0862WT

0661WT

0460WT

1063ST

0862ST

0661ST

ST

WT

ST

WT

ST

WT

ST

WT

ST

WT

6 × 4 in 7.4 in 4.4 in

(150 × 100 mm) (187 mm) (111 mm)

6 × 4 in 7.4 in 4.4 in

(150 × 100 mm) (187 mm) (111 mm)

10 × 8 in 17.9 in 9.9 in

(250 × 200 mm) (454 mm) (252 mm)

10 × 8 in 17.9 in 9.9 in

(250 × 200 mm) (454 mm) (252 mm)

12 × 8 in 22.5 in 13.6 in

(300 × 200 mm) (572 mm) (346 mm)

NOTE:

FITTINGS WHOSE PART NUMBERS END WITH "WT"

HAVE WATER TIGHT BELL CONNECTIONS. WATER

TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND

REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE

TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST"

HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT

BELLS HAVE MOLDED CLEATS AND REQUIRE NO

GASKET TO MAKE CONNECTION TO DUAL WALL PIPE.

DRAWING #: 3010

DRAWN BY: JCB 04.24.07

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: TJR 10.17.07

INJECTION MOLDED REDUCING TEE

PIPE SIZE A JOINTPART #

6" x 4" - 10"×8" - 12"×8" DIAMETER

B

1062ST

1062WT

1262WT

ST

WT

WT

0660ST ST

0660WT WT

4 in 7.4 in 5.5 in 6.1 in

(100 mm) (187 mm) (140 mm) (154 mm)

4 in 7.4 in 5.5 in 6.1 in

(100 mm) (187 mm) (140 mm) (154 mm)

6 in 10.5 in 8.0 in 8.7 in

(150 mm) (266 mm) (202 mm) (220 mm)

6 in 10.5 in 8.0 in 8.7 in

(150 mm) (266 mm) (202 mm) (220 mm)

8 in 13.8 in 10.6 in 11.4 in

(200 mm) (350 mm) (268 mm) (290 mm)

8 in 13.8 in 10.6 in 11.4 in

(200 mm) (350 mm) (268 mm) (290 mm)

10 in 17.9 in 13.3 in 14.4 in

(250 mm) (454 mm) (338 mm) (367 mm)

10 in 17.9 in 13.3 in 14.4 in

(250 mm) (454 mm) (338 mm) (367 mm)

12 in 22.5 in 16.5 in 18.1 in

(300 mm) (572 mm) (419 mm) (461 mm)

12 in 22.5 in 16.5 in 18.1 in

(300 mm) (572 mm) (419 mm) (461 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST" HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT BELLS HAVE MOLDED CLEATS AND REQUIRE NO GASKET TO MAKE CONNECTION TO DUAL WALL PIPE. DRAWING #: 3100

DRAWN BY: JCB 07.28.06APPROVED BY:

NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: TJR 9/26/2016

WT

ST

WT

ST

WT

ST

WT

ST

C

WT

ST

0480ST

0882WT

0681WT

0480WT

1083ST

0882ST

0681ST

1083WT

1284ST

1284WT

INJECTION MOLDED 45° WYE

PIPE SIZE A JOINTPART #

4" - 12" DIAMETER

B

6 × 4 in 9.3 in 8.3 in 4.8 in

(150 × 100 mm) (235 mm) (210 mm) (123 mm)

6 × 4 in 9.3 in 8.3 in 4.8 in

(150 × 100 mm) (235 mm) (210 mm) (123 mm)

8 × 4 in 10.7 in 10.0 in 9.2 in

(200 × 100 mm) (271 mm) (254 mm) (233 mm)

8 × 4 in 10.7 in 10.0 in 9.2 in

(200 × 100 mm) (271 mm) (254 mm) (233 mm)

8 × 6 in 12.6 in 11.3 in 10.8 in

(200 × 150 mm) (320 mm) (286 mm) (275 mm)

8 × 6 in 12.6 in 11.3 in 10.8 in

(200 × 150 mm) (320 mm) (286 mm) (275 mm)

10 × 8 in 17.9 in 14.3 in 13.9 in

(250 × 200 mm) (454 mm) (362 mm) (354 mm)

10 × 8 in 17.9 in 14.3 in 13.9 in

(250 × 200 mm) (455 mm) (362 mm) (354 mm)

12 × 6 in 17.1 in 15.8 in 14.5 in

(300 × 150 mm) (435 mm) (400 mm) (369 mm)

12 × 8 in 22.5 in 18.7 in 18.1 in

(300 × 200 mm) (572 mm) (474 mm) (461 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST" HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT BELLS HAVE MOLDED CLEATS AND REQUIRE NO GASKET TO MAKE CONNECTION TO DUAL WALL PIPE.

DRAWING #: 3110DRAWN BY: JCB 04.24.07

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: TJR 03.08.13

1082WT

1282WT

1281WT

WT

WT

INJECTION MOLDED 45° REDUCING WYE

PIPE SIZE A JOINTPART #

6" x 4" - 8" x 4" - 8" x 6" -10"×8" - 12" x 6" - 12"×8" DIAMETER

B C

WT

0680ST ST

0680WT WT

0880ST ST

1082ST ST

0880WT WT

0881ST ST

0881WT WT

4 in 1.3 in

(100 mm) (33 mm)

4 in 1.3 in

(100 mm) (33 mm)

6 in 1.8 in

(150 mm) (46 mm)

6 in 1.8 in

(150 mm) (46 mm)

8 in 2.4 in

(200 mm) (60 mm)

8 in 2.4 in

(200 mm) (60 mm)

10 in 3.4 in

(250 mm) (87 mm)

10 in 3.4 in

(250 mm) (87 mm)

12 in 4.4 in

(300 mm) (112 mm)

12 in 4.4 in

(300 mm) (112 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST" HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT BELLS HAVE MOLDED CLEATS AND REQUIRE NO GASKET TO MAKE CONNECTION TO DUAL WALL PIPE. DRAWING #: 3200

DRAWN BY: JCB 07.31.06APPROVED BY:

NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

1094WT

1294ST

1294WT

INJECTION MOLDED 45° BEND

PIPE SIZE A JOINTPART #

4" - 12" DIAMETER

0494ST

0894WT

0694WT

0494WT

1094ST

0894ST

0694ST

ST

WT

ST

WT

ST

WT

ST

WT

ST

WT

4 in 3.7 in

(100 mm) (93 mm)

4 in 3.7 in

(100 mm) (93 mm)

6 in 5.2 in

(150 mm) (133 mm)

6 in 5.2 in

(150 mm) (133 mm)

8 in 6.9 in

(200 mm) (175 mm)

8 in 6.9 in

(200 mm) (175 mm)

10 in 8.9 in

(250 mm) (227 mm)

10 in 8.9 in

(250 mm) (227 mm)

12 in 11.3 in

(300 mm) (286 mm)

12 in 11.3 in

(300 mm) (286 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

FITTINGS WHOSE PART NUMBERS END WITH "ST" HAVE SOIL TIGHT BELL CONNECTIONS. SOIL TIGHT BELLS HAVE MOLDED CLEATS AND REQUIRE NO GASKET TO MAKE CONNECTION TO DUAL WALL PIPE. DRAWING #: 3300

DRAWN BY: JCB 07.31.06APPROVED BY:

NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

ST

WT

ST

WT

ST

WT

ST

WT

ST

WT

0899WT

0699WT

0499WT

1099ST

0899ST

0699ST

1099WT

1299ST

1299WT

INJECTION MOLDED 90° BEND

PIPE SIZE A JOINTPART #

4" - 12" DIAMETER

0499ST

6 × 4 in 5.6 in 4.3 in 6.9 in

(150 × 100 mm) (142 mm) (108 mm) (176 mm)

8 × 4 in 5.7 in 4.3 in 9.2 in

(200 × 100 mm) (145 mm) (108 mm) (233 mm)

8 × 6 in 8.0 in 5.3 in 9.2 in

(200 × 150 mm) (204 mm) (133 mm) (233 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

DRAWING #: 3400DRAWN BY: JCB 07.31.06

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

WT

WT

WT

0874WT

0876WT

0674WT

INJECTION MOLDED BELL/SPIGOT REDUCER

PIPE SIZE A JOINTPART # B C

6 × 4 in 5.6 in 6.6 in 7.9 in

(150 × 100 mm) (142 mm) (167 mm) (201 mm)

8 × 4 in 5.7 in 6.6 in 10.4 in

(200 × 100 mm) (145 mm) (167 mm) (263 mm)

8 × 6 in 8.0 in 7.7 in 10.4 in

(200 × 150 mm) (204 mm) (196 mm) (263 mm)

10 × 8 in 10.3 in 9.9 in 12.9 in

(200 × 100 mm) (262 mm) (250 mm) (327 mm)

12 × 8 in 10.4 in 11.2 in 16.3 in

(200 × 150 mm) (265 mm) (285 mm) (413 mm)

12 × 10 in 13.0 in 12.3 in 16.3 in

(200 × 100 mm) (329 mm) (313 mm) (413 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

DRAWING #: 3500DRAWN BY: JCB 07.31.06

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

INJECTION MOLDED REDUCING BELL/BELL COUPLER

PART # PIPE SIZE A B C JOINT

WT

WT

WT

1218WT

1210WT

1018WT

0816WT WT

0614WT WT

0814WT WT

4 × 4 in 2.3 in 4.7 in 5.6 in

(100 × 100 mm) (59 mm) (119 mm) (141 mm)

6 × 6 in 3.5 in 6.9 in 7.9 in

(150 × 150 mm) (88 mm) (176 mm) (201 mm)

8 × 8 in 4.3 in 8.6 in 10.4 in

(200 × 200 mm) (108 mm) (217 mm) (263 mm)

10 × 10 in 5.5 in 11.0 in 12.9 in

(250 × 250 mm) (140 mm) (279 mm) (326 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

DRAWING #: 3600DRAWN BY: JCB 03.28.07

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: TJR 10.17.07

INJECTION MOLDED BELL/BELL COUPLER

PIPE SIZE A JOINTPART # B

1013WT WT

C

0413WT

0613WT

0813WT

WT

WT

WT

8 × 4 in 16.0 in 8.1 in 9.4 in 6.0 in

(200 × 100 mm) (406 mm) (206 mm) (239 mm) (151 mm)

8 × 4 in 16.0 in 8.1 in 9.4 in 6.0 in

(200 × 100 mm) (406 mm) (206 mm) (239 mm) (151 mm)

8 × 6 in 21.8 in 10.0 in 13.8 in 6.8 in

(200 × 150 mm) (554 mm) (255 mm) (349 mm) (171 mm)

8 × 6 in 21.8 in 10.0 in 13.8 in 6.8 in

(200 × 150 mm) (554 mm) (255 mm) (349 mm) (171 mm)

10 × 6 in 22.5 in 14.1 in 12.5 in 10.9 in

(250 × 150 mm) (572 mm) (359 mm) (317 mm) (276 mm)

10 × 6 in 22.5 in 14.1 in 12.5 in 10.9 in

(250 × 150 mm) (572 mm) (359 mm) (317 mm) (276 mm)

12 × 6 in 24.5 in 14.1 in 11.8 in 10.9 in

(300 × 150 mm) (622 mm) (359 mm) (299 mm) (276 mm)

NOTE: FITTINGS WHOSE PART NUMBERS END WITH "WT" HAVE WATER TIGHT BELL CONNECTIONS. WATER TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

DRAWING #: 3700DRAWN BY: JCB 03.28.07

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: TJR 10.17.07

INJECTION MOLDED SWEEPING TEE

PIPE SIZE A JOINTPART #

8"×4" - 12"×6" DIAMETER

B

1236WT WT

DC

0863WT

0836WT

1036WT

WT

WT

WT

1036ST ST

0863ST ST

0836ST ST

4 in 2.7 in 5.1 in

(100 mm) (67 mm) (131 mm)

6 in 3.9 in 7.3 in

(150 mm) (98 mm) (185 mm)

NOTE:

FITTINGS WHOSE PART NUMBERS END WITH "WT"

HAVE WATER TIGHT BELL CONNECTIONS. WATER

TIGHT BELLS ARE SHOWN HERE IN THIS DRAWING AND

REQUIRE GASKETS TO BE FITTED TO DUAL WALL PIPE

TO FORM A WATER TIGHT JOINT. (GASKETS INCLUDED)

DRAWING #: 3800

DRAWN BY: JCB 03.28.07

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS: NJP 06.15.07

INJECTION MOLDED END CAP

PIPE SIZE A JOINTPART # B

0432WT

0632WT

WT

WT

4 in 2.2 in

(100 mm) (56 mm)

6 in 3.3 in

(150 mm) (84 mm)

8 in 4.0 in

(200 mm) (102 mm)

10 in 5.0 in

(250 mm) (127 mm)

12 in 6.4 in

(300 mm) (163 mm)

NOTE: DIMENSION IS NOT OVERALL BELL LENGTH AND IS TO BE ADDED TO RESPECTIVE FITTING'S INDICATED LAY LENGTH

DRAWING #: 3900DRAWN BY: TJR 6/10/2009

APPROVED BY:NOTE: ALL FITTINGS DIMENSIONS ARE FOR REFERENCE ONLY REVISIONS:

(REFERENCE CHART)

PIPE SIZEBELL*

LENGTH

INJECTION MOLDED BELL LENGTH