InGlass technical brochure Europe

12

description

technical Interiors brochure english Europe

Transcript of InGlass technical brochure Europe

Page 1: InGlass technical brochure Europe
Page 2: InGlass technical brochure Europe

GUARDIAN M I R R O R

®

GUARDIAN Mirror is a high quality mirror offering durability and beautiful reflectance. The possibilities for decoration are unlimited: small and confined spaces become bigger, dark and dull rooms fill up with light. GUARDIAN Mirror exceeds all existing quality requirements set by the European mirror norm EN 1036.

■ Appearance

GUARDIAN Mirror is highly reflective and offers a true image reflectance.

■ Heat resistance

It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.

■ Moisture resistance

If installation norm EN 1036 is respected, the mirror can be used in an environment where moisture is present (e.g. in a bathroom).

■ Scratch resistant

It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.

■ Safety

GUARDIAN Mirror is available in two safety versions: Ultra-Mirror Safety (with a protection film) and LamiGlass® Mirror (laminated mirror) for superior resistance and protection.

■ Stocking

As with float glass, GUARDIAN Mirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided. As ordinary mirror, it must be stored vertically.

■ Processing

It can be cut on the glass side and used in different fabrication processes (drilling, grinding, etc.).

The following sizes and thicknesses are available:

■ Sizes: 2250 x 3210 and 2550 x 3210 (other dimensions upon request);

■ Thicknesses:2, 3, 4, 5 and 6 mm.

Disclaimer: This information is intended to provide general information about GUARDIAN Mirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of

the product before any use in an industrial process.

■ Installation

Installation must be performed following installation norm EN 1036. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request).

■ Cleaning

It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.

Do not use any acid or alkali cleaners, the protective coating and the silver layer could be damaged.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 3: InGlass technical brochure Europe

GUARDIAN L A M I G L A S S

® M I R R O R

GUARDIAN LamiGlass® Mirror has been developed by GUARDIAN to combine decoration and maximum safety. This product can be used for many applications as decorative walls, pilars and partitions, where the highest safety standards are required (shopping centres, schools, swimming pools, fitness centres, hospitals, etc.).

■ Safety

GUARDIAN LamiGlass Mirror offers increased protection against injury and damage in case of breakage. It is manufactured with polyvinyl (PVB) interlayer that is designed to hold broken glass fragments between the two panes of glass. The product is certified to the safety norm EN356, class P1A for 3.3.2 and P2A for 4.4.2.

Also available in Absolute Black and Polar White (other colours upon request):

■ Environmentally friendly

It respects the environment with a copper free manufacturing process.

■ Quality

Copper free manufacturing process enhances mirror protection against corrosion.

■ Heat resistance

It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.

■ Improved moisture resistance

If the edges are appropriately protected, it resists against humidity.

■ Scratch resistant

It is also available in DiamondGuard® version, in which glass side is more resistant to scratches than ordinary float glass.

■ Stocking

As with float glass, GUARDIAN LamiGlass Mirror must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.

■ Processing

It can be used in different fabrication processes (drilling, grinding, etc.).

■ Installation

It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive.

■ Cleaning

It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.

The following colours, sizes and thicknesses are available:

■ Colours: Available in Absolute Black and Polar White (other colours upon request);

■ Sizes: 2250 x 3210 and 2550 x 3210mm (other dimensions are available upon request);

■ Thicknesses: 3.3.2 (6,76mm) and 4.4.2 (8,76mm).

Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Mirror and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process.

mirror double PVB opal glass

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

PVB Absolute Black PVB Polar White

Page 4: InGlass technical brochure Europe

GUARDIAN DIAMONDGUARD ®

GUARDIAN DiamondGuard® is the only glass in the market that provides permanent scratch-resistance. Thanks to a unique and proprietary protective coating, the glass surface maintains its elegance longer. The product is ideal for interior decoration including: wall panels, sliding doors, partitions, table tops, shelving, furniture, shop furniture, doors, etc.

■ Stocking

GUARDIAN DiamondGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation.

■ Processing

It can be used in different fabrication processes (drilling, grinding, etc.).

■ Maintenance

With its smooth surface GUARDIAN DiamondGuard is easy to clean. The protective coating is stable against attack from common acids and alkalis, it doesn’t require special cleaning product or coating replenishment.

■ Installation

Can be installed with neutral silicon (free of solvent) or double-sided adhesive.

The following sizes and thicknesses are available:

■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request);

■ Thicknesses: 4, 5, 6, 8, 10, 12 and 15mm.

■ Improved scratch resistance

GUARDIAN DiamondGuard coating offers to the glass a smoother and harder surface, with most materials simply sliding over it. The glass surface resists scratching from every-day items such as keys, bracelets, laptops, handbags, buttons, etc.

■ Durability and quality

GUARDIAN DiamondGuard coating is not a removable plastic film, but a durable and permanent protective layer that is bonded to glass. GUARDIAN DiamondGuard works to retain the beauty of glass, resulting in products that last longer.

■ Appearance

Is available on other GUARDIAN products including: LamiGlass®, DecoCristal®, Ultra-Mirror® and UltraClearTM (low-iron glass).

■ Heat-resistance

Contact with a strong heat source must be avoided.

■ UV-sensitive

Is designed to be used for interior applications only. * Please notice that DiamondGuard coating is slightly coloured and can modify the final appearance of the product

Disclaimer: This information is intended to provide general information about GUARDIAN DiamondGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 5: InGlass technical brochure Europe

GUARDIAN CRISTALGUARD TM

GUARDIAN CristalGuard® is the first and only shower glass that provides permanent protection against corrosion and discoloration. GUARDIAN has developed a patented technology that seals the glass surface against corrosion, creating an easy-to-clean surface that will maintain its original appearance for years to come.

■ Easier to clean

The surface of GUARDIAN CristalGuard glass is treated with a patented ion-beam deposition process to seal the surface against attack from chemicals and shower contaminants, allowing your glass to remain smooth and easy to clean.

■ Durability

Unlike spray-on or wipe-on treatments that eventually come off, the coating on GUARDIAN CristalGuard glass is permanent.

■ UV-sensitive

CristalGuard is designed to be used for interior applications only.

■ Heat-resistance

Contact with a strong heat source must be avoided.

■ Colours

Available on DecoCristal® Safety, a lacquered glass with a safety film that is certified to the safety norm EN1260.

■ Smooth

The protective coating provides to the glass a coefficient of friction being less than half that of standard float glass. This results in a much smoother surface than ordinary glass.

■ Stocking

GUARDIAN CristalGuard must not be stored outside. Storage should be in a dry and clean place, a suitable distance away from glass washers, external doors and corrosive chemicals. Relative humidity in the warehouse should not exceed 70% and a minimum temperature of 15°C should be maintained in order to prevent condensation. For more information please refer to the Fabricator User Guide (available upon request).

The following sizes and thicknesses are available:

■ Sizes: 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions are available upon request);

■ Thicknesses: 6, 8 and 10mm.

New uncoated glass

Unprotected shower Glass exposed to typical

Shower conditions

CristalGuard Protected glass Exposed to typical Shower conditions

■ Processing

Can be used in most common fabrication processes. Should be processed on the coated surface. For further information please use the Fabricator User Guide.

Disclaimer: This information is intended to provide general information about GUARDIAN CristalGuard and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 6: InGlass technical brochure Europe

GUARDIAN UltraClearTM is manufactured using the latest advanced glassmaking technology. GUARDIAN UltraClear combines attractive aesthetics with technical benefits, its sheer beauty making it perfect for all interior and exterior designs. The stunning clarity of this product makes it the first choice for architecture (modern residences, offices, double-skin facades), interior design (window, doors, staircases) and industry (shop windows, display cases, aquariums, etc.)

■ Processing

Can be tempered, laminated and painted just like regular float glass and can be used in virtually all glass applications.

The following sizes and thicknesses are available:

■ Sizes: 2550 x 3210 & 3210 x 5100 (other dimensions upon request);

■ Thicknesses: On stock: 3, 4, 6, 8, 10 and 12mm.

Disclaimer: This information is intended to provide general information about GUARDIAN UltraClear and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends testing of

the product before any use in an industrial process.

G u a r d i a n UL T R A CLEAR

TM

■ Advantages

GUARDIAN UltraClear takes natural light a step further. With higher transparency and a more neutral colour. The advantages are clear to the naked eye: Better visibility, higher clarity and unsurpassed elegance.

■ Safety

It provides a dramatic improvement when used in laminated applications. Until now, the typical result when laminating conventional clear float glass was color distortion and a reduction of visible light transmission as the laminate thickness increased. GUARDIAN UltraClear’s combination of strength, security and distortion-free vision equals un-paralleled performance.

Thickness (mm)

Light Transmission (%)

Light Reflection (%)

Colour Rendering Index (R3)

Energy Transmission (%)

Energy Reflection (%)

Energy Absorption (%)

Solar Factor g (%)

Shading Coefficient (SC)

UV Trans-mission (%)

2 92 8 100 91 8 1 91 1.05 85

3 91 8 100 90 8 1 91 1.04 83

4 91 8 100 90 8 1 90 1.04 81

5 91 8 100 90 8 2 90 1.04 79

6 91 8 100 89 8 3 90 1.03 77

8 91 8 100 89 8 4 89 1.03 74

10 91 8 100 88 8 4 89 1.02 71

12 90 8 99 87 8 5 88 1.01 69

All GUARDIAN Float Glass products comply with EN 572-2: 1994 ‘’Glass in Building - Basic Soda Lime Silicate Glass Products - Part 2: Float Glass’’ standards, and DIN 1249-10: 1990 ’’Glass in Building: Chemical and Physical Properties’’ standards. All light and energy values have been measured and calculated according to EN 410. All data are nominal values, subject to product tolerances, and without obligation.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 7: InGlass technical brochure Europe

Fluo Green Red Fluo Orange Fushia Purple Violet Blue Blue Lagoon 3850 2085/3001 4115/2001 4006 1220/4007 Luminous 2080 4105/5002

Silver Metal Grey 3250/9022 9006

The Brights

Black White Swan White Ice White UltraWhite 3935/9005 1820/9003 9010 1240/9003 1820/9003 LI (Low Iron)

The Naturals

The Essentials

Black Grey Shark Grey True Grey Brown Caramel Wood Brown Grey Beige 0659 1230 Bordeaux 1250 Brown 2180 2410 3004 1370

These colours are indicative only, they don’t give an accurate reproduction of the range.

GUARDIAN DECOCRIS TAL

®

GUARDIAN DecoCristal® is a float glass that is lacquered with an opacified paint. It can be used in the widest range of interior decoration projects (e.g. commercial buildings, offices, hotels, homes, etc.) for applications such as partitions, sliding doors, kitchen furniture, tables, wardrobe doors, etc. GUARDIAN DecoCristal offers numerous possibilities (safety version, easy-to-clean shower glass, scratch resistant and personalised colours). It provides modern design and beauty in any decoration project.

■ UV-sensitive

It is designed to be used for interior applications only.

■ Heat resistance

It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.

■ Specific colour

GUARDIAN DecoCristal can also be personalised in the colour of your choice.

■ DecoCristal Safety

It is available with safety film.

■ DiamondGuard® DecoCristal®

It is available in DiamondGuard® version, in which the coated side is more resistant to scratches than ordinary float glass.

■ CristalGuardTM DecoCristal®

Available in CristalGuard version, an easy-to-clean shower glass that provides permanent protection against corrosion and discoloration.

■ SatinDeco® DecoCristal®

It is also available in a mat version, on a satinated glass, for a soft and elegant appearance. Availability upon request.

■ Colours

■ Stocking

As with typical float glass, GUARDIAN DecoCristal must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.

■ Processing

It can be cut the same way as mirror on the glass side and used in different fabrication processes (hole drilling, grinding, etc.).

■ Installation

It cannot be installed on a humid wall. A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request).

■ Cleaning

It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.

The following sizes and thicknesses are available:

■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request);

■ Thicknesses: 4 and 6mm (3, 5, 8 and 10mm upon request).

Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 8: InGlass technical brochure Europe

GUARDIAN DECOCRIS TAL

® SAFETY

GUARDIAN DecoCristal® Safety is a float glass lacquered with an opacified paint and strengthened by a clear safety film. In case of breakage, the glass remains fixed to the safety film, reducing the chance of injury. GUARDIAN DecoCristal Safety can be used in the widest range of interior decoration projects where improved safety standards are required (homes, offices, restaurants, etc.). Perfectly suited for decorative wall, wardrobe door and furniture application, it provides an optimal combination of modern design and safety.

■ Quality

The safety film protects the paint layer from possible scratches.

■ UV-sensitive

It is designed to be used for interior applications only.

■ Heat resistance

It can be used in environments up to 60°C. Proximity with a strong heat source must be avoided.

■ Improved moisture resistance

The safety film offers an improved moisture resistance.

■ DiamondGuard® DecoCristal®

The treated side is more resistant to scratches than ordinary float glass.

■ CristalGuardTM DecoCristal® An easy-to-clean shower glass that provides permanent protection against corrosion and discoloration.

■ Safety

GUARDIAN DecoCristal Safety reduces the chance of injury and damage due to glass breakage by using a safety film that is designed to hold broken fragments together. Certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm.

■ Stocking

As with typical float glass, GUARDIAN DecoCristal Safety must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.

■ Processing

It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).

■ Installation

A neutral silicon (free of solvent) or a double-sided adhesive can be used (a list of compatible products is available upon request). For further information please reference the Processing Guidelines

■ Cleaning

It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.

The following colours, sizes and thicknesses are available:

■ Colours: All the standard and custom colours;

■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request);

■ Thicknesses: 4mm and 6mm (3, 5, 8 and 10mm upon request).

Disclaimer: This information is intended to provide general information about GUARDIAN DecoCristal Safety and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recom-

mends testing of the product before any use in an industrial process.

glass paint layer clear safety film

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 9: InGlass technical brochure Europe

GUARDIAN CRISTALGUARD TM DECOCRISTAL

®

The combination of GUARDIAN CristalGuardTM DecoCristal® gives the first easy-to-clean coloured glass that represents an alternative to wall tiles. A unique lacquered glass that is permanently protected against hard water corrosion and discoloration and that reduces the chance of injury due to glass breakage by using a safety film on the back.

■ Easy to install

You can easily install this product with silicone and without a lot of cuts.

■ Safety

The polypropylene film brings the safety that is required in a bathroom. In case of breakage, the glass remains fixed to the safety film, reducing the risk of injury. The product is certified to the safety norm EN12600, class 3 for 4mm and class 2 for 6mm.

■ UV-sensitive

GUARDIAN CristalGuardTM DecoCristal® is designed to be used for interior applications only.

■ Other colours*

* Availability of these colours upon request.

■ Stocking

As with typical float glass, GUARDIAN CristalGuardTM Deco-Cristal® must be stored in a dry environment. The edges of the product must be protected and contact with chemical products must be avoided.

The following sizes and thicknesses are available:

■ Sizes: 2550 x 3210 (2250 x 3210, 3210 x 6000mm and other dimensions are available upon request);

■ Thicknesses: 6mm (other thicknesses are available upon request).

■ Processing

It can be cut on the safety film and used in different fabrication processes (drilling, grinding, etc.).

Disclaimer: This information is intended to provide general information about GUARDIAN CristalGuard DecoCristal and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always

recommends testing of the product before any use in an industrial process.

■ Standard colours

GUARDIAN CristalGuardTM DecoCristal® is always available in 4 fashion colours:

■ A more beautiful & clean shower

The use of glass as wall covering in bathroom avoids the presence of seal where bacteria and dirt can accumulate. Besides, thanks to CristalGuard, it is now very easy to maintain the shiny and glossy appearance of your glass, in the back of your shower or for the walls of your bathroom. Combined with CristalGuard, DecoCristal coloured glass will keep its brightness and shiny colour for longer with minimal cleaning efforts. GUARDIAN CristalGuardTM Deco-Cristal® can be installed in all places which have direct or indirect contact with water or liquids (showers, sink, bathtube, toilets, etc.).

Blue Luminous Blue Lagoon White Swan White UltraWhite 4105/5002 2080 1820/9003 9010 1820/9003 LI (Low Iron)

Black Shark Grey Black Grey Grey Brown Metal Grey Silver 3935/9005 1230 0659 1250 9006 3250/9022

True Bordeaux Red Fluo Orange Fushia Purple Violet Fluo Green 3004 2085/3001 4115/2001 4006 1220/4007 3850

Grey Beige Caramel Brown Wood Brown Black Grey 2410 1370 2180 0659

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 10: InGlass technical brochure Europe

GUARDIAN L A M I GL A S S ® D E C O

GUARDIAN LamiGlass® Deco is a product composed of two sheets of float glass bonded by one or several coloured PVB interlayers. GUARDIAN LamiGlass Deco brings colours, light and safety in the decorative and architectural world. It can be used in many applications: windows, decorative wall, ceiling, pillar, stairs etc. This product is suitable for exterior and interior, for public and private places, where the highest safety standards are required (shopping centres, universities, swimming pools, fitness centres, hospitals, etc.).

■ Appearance

Also available with LamiGlass Mirror®, SatinDeco®, DecoCristal® and UltraClearTM low-iron glass.

■ Colours

There are 16 foundation colours, which can be combined (4 colours layers maximum) or used separately. Thus GUARDIAN is able to personalize GUARDIAN LamiGlass Deco in the colour of your choice, there are over 3.000 transparent, translucent or opaque colour options*.

These colours are indicative only, they don’t give an accurate reproduction of the LamiGlass Deco range.

■ Acoustic properties

This product can also be combined with GUARDIAN LamiGlass Acoustic.

* Light coloured PVB as Sahara Sun or Golden Light have to be protected by another PVB, clear or coloured

■ Stocking

GUARDIAN LamiGlass Deco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.

■ Processing

It can be used in different fabrication processes (drilling, grinding, etc.).

■ Installation

It can be installed similar to standard glass with a neutral silicon (free of solvent) or a double-sided adhesive.

■ Cleaning

It can be easily washed using a clean cloth with a standard and non-abrasive glass-cleaning product.

The following sizes and thicknesses are available:

■ Sizes: 2400 x 3210 mm (other dimensions are available upon request);

■ Thicknesses: 3+3, 4+4, 5+5, 6+6, 8+8 and 10+10 (12+12 only in: 1800 x 3210 mm).

Disclaimer: This information is intended to provide general information about GUARDIAN LamiGlass Deco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process

coloured PVB interlayers glass glass

■ Safety

GUARDIAN LamiGlass Deco offers increased protection against injuries and damages in case of breakage. It is manufactured with a highly resistant coloured PVB interlayer that is designed to hold broken glass fragments between the two panes of glass. The industrial procedure used to produce the PVB interlayer is subject to the strictest standards of quality control: EN ISO 9002.

■ Uses

Perfect for decorative uses both inside and outside.

Coral Rose 0001 Aquamarine 0002 Smoke Grey 0003 Sahara Sun 0004

Ruby Red 0005 Sapphire 0006 Evening Shadow 0007 Golden Light 0008

Arctic Snow 0009 Cool White 000A Deep Red 000C True Blue 000D

Tangerine 000E Polar White 000H Absolute Black 000G Ocean Grey 000H

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 11: InGlass technical brochure Europe

GUARDIAN SAT INDECO ®

GUARDIAN SatinDeco® is an acid-etched glass that offers an excellent surface finish, making it very easy to clean. Thanks to its elegant appearance and great versatility, this glass is ideal for a wide range of applications including: windows, doors, floors, homes, offices, hotels, public buildings, shops, etc. GUARDIAN SatinDeco has become a key product in modern day decoration creating a elegant, clear and bright environment.

■ Appearance and Quality

GUARDIAN SatinDeco has an excellent silky finish. It disperses the light and transforms the transparent float into a translucent glass.

■ Uses

Perfect for decorative applications indoor and outdoor.

■ Easy to clean

With its smooth surface the product is easy to clean and helps to prevent finger prints.

■ Environment

GUARDIAN SatinDeco manufacturing line includes the most advanced technology to treat any waste product that is derived from the manufacturing process.

■ SatinDeco Vidromat

A maximum amount of light transmission with a slight acid etch finish that reduces glare and promotes distortion free vision.

■ SatinDeco Elegance

An acid-etched glass even smoother than the original, which provides a more subtle aesthetic with parallel performance.

■ SatinDeco Inspiration

Ideal for picture frames, inspiration achieves a high quality anti-reflective surface that significantly reduces glare.

■ DecoCristal® & SatinDeco

Can also be lacquered with a coloured and opacified organic paint. Available in all the standard DecoCristal colours and even in the colour of your choice. Availability upon request.

■ LamiGlass® & SatinDeco

Can be laminated with PVB available in acoustic version and in different colours.

■ Other combinations

GUARDIAN SatinDeco is also available on UltraMirror®, Ultra-ClearTM low-iron glass and in Double Side.

■ Stocking

GUARDIAN SatinDeco must be stored in a dry environment. The edges of the product must be protected and contact with chemical products should be avoided.

■ Processing

Can be cut and used in different fabrication processes (drilling, grinding, etc.). The product can also be tempered (flat or curved), painted or printed, laminated, mirror-coated, etc.

■ Installation

Similar to standard glass, it can be installed with neutral silicon (free of solvent) or double-sided adhesive. Once installed, it does not require any special attention.

■ Cleaning

Can be easily washed using a clean cloth with a standard and non-abrasive glass cleaning product.

The following thicknesses and sizes are available:

■ Sizes: 1800 x 3210, 2250 x 3210, 2550 x 3210 and 3210 x 6000mm (other dimensions available upon request);

■ Thicknesses: 3, 4, 5, 6, 8, 10, 12 and 15mm (19mm is available upon request);

The thicknesses available for DecoCristal & SatinDeco: 3, 4, 6 and 8mm;

The compositions available for LamiGlass & SatinDeco: 3+3, 4+4, 5+5, 6+6, 8+8, 10+10, 12+12 and 15+15.

Disclaimer: This information is intended to provide general information about GUARDIAN SatinDeco and does not constitute a warranty that the product is suitable for a particular purpose. GUARDIAN always recommends

testing of the product before any use in an industrial process.

DESCRIPTION DESCRIPTION DESCRIPTION ANDANDAND APPLICATIONSAPPLICATIONSAPPLICATIONS

PROPERTIEPROPERTIEPROPERTIESSS

HANDLINHANDLINHANDLINGGG

AVAILABILITAVAILABILITAVAILABILITYYY

Page 12: InGlass technical brochure Europe

© 2012 Guardian Industries Corp.