Ingersoll Rand ARO - Process Controls And … · 2 2 Contents 1 Lubrication Equipment Warranty...

Ingersoll Rand AROLubrication Equipment Catalog

IRPS0259_Lubrication_catalog7.qxd 9/14/07 3:25 PM

2

2

Contents

1

Lubrication Equipment Warranty

Ingersoll Rand / ARO lubrication equipment is built with the finest materials to deliver reliableproducts with extended durability. Our warranty is your assurance of a quality product. See yourIngersoll Rand distributor for details.

Air compressor

Windshieldwashersolvent

Gear oil Automatictransmission

fluid

Chassis lube

grease

Motor oilfrom

lube tank

Lubrication EquipmentIngersoll Rand / ARO lubrication

equipment reflects the same high

standards of performance as our

tools and air compressors, with a

full range of products that will keep

all types of fluids moving efficiently.

They are backed by more than 70

years of experience in pump and air

system technology, and include

models specifically designed for

popular applications.

• Piston pumps for grease ... or for motor oil,gear oil, and transmission fluid

• Unique design improves flow, reducespulsation, and extends service life

• 50 percent fewer parts than comparable pumps

• Fast, easy, in-line service, with no special tools required

• Stall-free, ice-free air motor with tough,durable housing

• Diaphragm pumps for drum use with oiland other light fluids ... or for direct usewith anti-freeze, water, windshield cleaningfluid, fuel, solvents, oils, transmission fluid,and waste oil

• Patented unstallable air valve applies constant pressure to ensure resets

• Bolted construction provides better jointintegrity and fast, easy servicing

• No lubrication or complex controls required

• Digital / metered fluid control handles thatare precise and easy to use

• High-pressure grease control handles

• Hand-held grease guns

• Convenient hose reels for a clean, safe workplace

• Professional grade oil drains

• Full range of general lubrication fittings and accessories

All Ingersoll Rand / ARO lubrication equipment

is built to a global quality standard to deliver

unmatched dependability and productivity.

Call your distributor for complete details and

recommendations for your facility.

Lubrication Equipment Introduction 2

Piston Pumps 7

Piston Pump Accessories 10

Grease Pumps 12

Grease Pump Accessories 14

Diaphragm Pumps 17

Diaphragm Pump Accessories 22

Hose Reels 24

Control Handles 29

Control Handle Accessories 31

Hand-operated Pumps 32

Hand-held Grease Guns 33

Fittings and Accessories 34

General Installation Accessories 36

Filters, Regulators, and Lubricators 42

Self-evacuating Waste Oil caddies 46

Waste Oil and Fresh Oil Caddy Systems 47

Oil Drains and Accessories 49

Bulk Fluid Management 50

Bulk Oil Tanks 51

Warranty Policy 55

Contact Information 56

arozone.com

(800) 495-0276


Windshieldsolventmixture

Gear oil

Chassis

Motor oil(from

bulk tank)

Air

com

pre

ssor

Automatic

transmission

fluid

43

Windshield solvent,automatic transmissionfluid anti-freezeAn excellent delivery pump for all types of fluids, the Ingersoll Rand / ARO1/2” diaphragm pump is the best-sellingdiaphragm pump in the country – and it’scovered by a 5-year warranty.

1. Pump:PD05P-ARS-PTT-B

2. 1/2” air line filter:F25241-110

3. 1/2” material hose:623501-5

4. Wall-mount bracket:76763

5. Pump: LM2305A-11-B

6. Wall-mount bracket: 61113

7. 1-1/2” ID material hose (by others)

8. Siphon tube assembly:66779 with 1-1/2” (F) x 1”reducing bushing

9. 1/4” ID air hose: 622201-3

10. Siphon tube assembly:61409

11. Air line filter / regulator:P29221-610(gauge included)

12. Pump:LM2305A-41-B(55-gal service)

13. Single-post lift: 640067 (400-lb service)

14. Pump:LP3005-1 (400 lb. service)LP3002-1 (120 lb. service)

15. Follower plate assembly:640015-1 (400# service)640165 (120# service) (included with LP3002-1)

16. Pump: LM2305A-11-B


18. 1-1/2” ID material hose:(by others)

19. 1” pipe swivel union:75368 with 1-1/2” (F) x 1”(M) reducing bushing

High-pressure relief valve Kit: 61118.

Model PD05P-ARS-PTT-B1:1 ratio13 gpm(free flow)

Model LM2305A-41-B5:1 ratio, 3” air motor9 gpm(free flow)

Model LP3005-150:1 ratio, 3” air motor7.5 ppm(free flow)

Model 666100-3C9-C1:1 ratio35 gpm(free flow)

Motor/gear oil, automatictransmission fluidThis reliable, hard-working pumpcomes complete with air coupler andconnector, plus a 2” bung adapter.

1 12 14

EQUIPMENT ROOM

1

2

3

4

9

10

1111 11

12

5

66

11

13

14

15

19 18

17

16

6

7

8

Waste oilThe Ingersoll Rand / ARO 1”diaphragm pump’s simple design will provide years of trouble-freewaste oil handling. All of ourdiaphragm pumps are covered by a 5-year warranty for an extra measure of user security.

PIT AREA

1. 1” diaphragm pump: 666100-3C9-C


3. 1/4” air hose:622201-5

4. Air line filter / regulator, gauge:P29122-600

5. 1” ID material outlet hose:628067-3

6. Fluid connector: 92022

7. Fluid coupler: 92021

8. 1” ID material inlet hose:628066-6

Waste oil system

Gear oil service1. Control handle:

635391-1

2. 1/2” material hose:623501-10In-line meter:635190-1

3. 1/2” medium-pressure shut-off valve:66592 (order separately)

Whip hose

629742

635391-1

636111

4 6

7

8

3

3

2

2

1

1

5

3

1

2

Chassis service1. High-pressure control handle:

636111Swivel: 636077

2. 1/4” ID material hose:624201-10

3. 1/2” high-pressure shut-off valve:636042 (order separately)

Typical Quick-lube Installation

ChassisDesigned for high-pressure deliveryof grease, the pump will handleyour toughest chassis lube needs.Comes with air / material hose plusdrum cover.

Typical Quick-lube Installation (continued)

arozone.com

(800) 495-0276

IRPS0259_Lubrication_catalog7.qxd 9/14/07 3:25 PM Page 4

65

Lubrication Equipment Quick Reference

The illustration on these pages represents a

typical layout for service fluids.

Pumps for high-pressure wash-down

Calcium chloridetire fill package

Oil supplypumps

Solvent pumps

Drains

Pumps for anti-freeze andwindshield fluid

Gear oil

Solvents

Gear oil

Water

Anti-freeze

Waste oil

Transmissionfluid

Chassisgrease

Air lineaccessories

Meters, controlhandles, nozzles

Greasepumps

Pump lifts

Bulk oil tank

arozone.com

(800) 495-0276


8

Piston Pumps

7

Motor Oil, Gear Oil, Transmission Fluid

3:1 Oil

LM2203A-11-C

5:1 Oil

LM2305A-11-B

Piston Pump PackagesControl Drum

Model Description Pump Model Meter Handle Dolly Cover Hose Valve

OIL PUMP PACKAGES

LP2100-1-B 3:1 ratio, 16-gal portable pump package LM2203A-31-C 635190-1 (pint) 635391-1 640058-2 94421 623501-6 67085

LP2100-2-B 3:1 ratio, 16-gal portable pump package LM2203A-31-C 635190-3 (Liter) 635391-1 640058-2 94421 623501-6 67085

LP3100-1-B 5:1 ratio, 16-gal portable pump package LM2305A-31-B 635190-1 (pint) 635391-1 640058-2 94421 623501-6 N/A

LP3100-2-B 5:1 ratio, 16-gal portable pump package LM2305A-31-B 635190-3 (Liter) 635391-1 640058-2 94421 623501-6 N/A

LM Series Piston Pumps Built tough to fit the way you work

LM Series piston pumps deliver unmatched industrial-strength performancefor pumping fluids with sizes to fit small (16 gal / 35 lb) or large (275 gal /400 lb) containers. Working flow rates range from two to six gallons perminute. Pumps are offered from 3:1 to 50:1 ratios, in order to meet therequirements of any application.

Features and benefits

Pump’s patented design improves flow, reduces pulsation, and extends service life

Offers simple self-service maintenance due to advanced design with 50% fewer parts

Reduces service time, due to in-line service design with no special tools required

Features stall-free, ice-free air motor with tough, durable housing

Muffler design

reduces noise

level

Patented air

motor design

1/2” NPT

fluid outlet

1/4” NPTF

air inlet

Why Ingersoll Rand / ARO?Our LM series is ideal for pumping grease, motor oil, gear oil, ortransmission fluid. The simple, durable design allows for pistonpump service by any owner or qualified technician. Also look for our convenient grease and oil pump packages.

Flexibility — LM pumps can be serviced in-line and feature a rugged all-weather design (3:1 pumps only)

Dependability — Valving design uses no trip rods or push pins that usually break

Durability — Our stall-free, ice-free air motor is contained in a rugged housing

Commitment — Ingersoll Rand pumps come with a 5-year warranty

ContainerWorking Flow Free Flow Fluid Inlet / Outlet Size Air Inlet

Model gpm (L) gpm (L) NPTF (mm) gal in (mm)

3:1 PISTON PUMP

LM2203A-11-C (-12-C = BSP Thread) 6 (23) 9 (34) 3/4" / 1/2" (19 / 13) Stub 1/4" (6)

LM2203A-31-C (-32-C = BSP Thread) 6 (23) 9 (34) 3/4" / 1/2" (19 / 13) 16 1/4" (6)

LM2203A-41-C (-42-C = BSP Thread) 6 (23) 9 (34) 3/4" / 1/2" (19 / 13) 55 1/4" (6)

LM2203A-51-C (-52-C = BSP Thread) 6 (23) 9 (34) 3/4" / 1/2" (19 / 13) 275 1/4" (6)

5:1 PISTON PUMP

LM2305A-11-B (-12-B = BSP Thread) 6 (23) 9 (34) 1-1/2" / 1/2" (38 / 13) Stub 1/4" (6)

LM2305A-31-B (-32-B = BSP Thread) 6 (23) 9 (34) 1-1/2" / 1/2" (38 / 13) 16 1/4" (6)

LM2305A-41-B (-41-B = BSP Thread) 6 (23) 9 (34) 1-1/2" / 1/2" (38 / 13) 55 1/4" (6)

LM2305A-51-B (-51-B = BSP Thread) 6 (23) 9 (34) 1-1/2" / 1/2" (38 / 13) 275 1/4" (6)

In-line service for 3:1 piston pumps

LP3100-1-BLP2100-1-B

One standard

wrench loosens

four nuts …

… and allows you to

replace all dynamic

service kit items

(no additional wrenches

required for 3:1 pump) …

… and put pump

back in service in a

matter of minutes.

arozone.com

(800) 495-0276


9 10

612041-1

1:1 ratio pump ideal forpumping motor oil, gearoil, and transmission fluid.This model fits a standard55-gal drum (includingbung adaptor).

612042-1

1:1 ratio piston pumps areideal for moving oils andfluids at high volumes. This model is designed for275 obround tanks.

662410-B

425 Series pumps aredesigned with a 9:1 pump ratio, 4-1/4” airmotor, and are ideal forpumping heavy oils overlong distances.

Working Free Air Fluid Container

Flow Flow Inlet Outlet Size

Model gpm (L) gpm (L) NPT (F) NPT (F) gal Accessories

PISTON PUMP 1:1 RATIO 2" DIAMETER AIR MOTOR (200 SERIES)

612041-1 9 (34) 18 (68) 1/4" 3/4" 55 Bung adapter

612041-3 9 (34) 18 (68) 1/4" 3/4" 55 Bung adapter

612042-1 9 (34) 18 (68) 1/4" 3/4" 275 Bung adapter

PISTON PUMP 9:1 RATIO 4 1/4" DIAMETER AIR MOTOR (425 SERIES)

662420-B 3.9 (14.8) 21 (79.4) 1/4" 3/4" Stub

662409 3.9 (14.8) 21 (79.4) 1/4" 3/4" 16

662410-B 3.9 (14.8) 21 (79.4) 1/4" 3/4" 55

Piston Pump Accessories

Model Description For Use With

5-GAL CONTAINERS

65986 Siphon tube has 6' long (1.8 m), Wall-mounted stub pumps3/4" ID hose with 3/4" NPT (M) outlet; hose is neoprene over Thiokol andincludes 91020-1 tube.

55-GAL CONTAINERS

65986-1 Siphon tube has 6' long (1.8 m), Drum cover for closed3/4" ID hose with 3/4" NPT (M) outlet; drum w/2-inch bung hose is neoprene over Thiokol. opening

61601 Speeds 55-gal drum change over. Wall-mounted stub pumpsNo need to handle pump. Includes 622651-06 hose, Y45-24-C adapter bushing, Y43-5-C street elbow, and 65109(36” long) carbon steel suction tube; 3/4" NPT(F) fluid outlet.

66779 For pumping from 55-gal drum. PVC Stub pumps and diaphragmtube has foot valve for positive priming. pumpsIncludes 76193 bung adapter, adjustableto approximately 35-1/2 inches; 1" NPT (F) fluid outlet.

61409 For pumping from 55-gal drum. 1/2-inch diaphragm pumps90° PVC siphon tube, 35-1/2 inches and stub pumps(901.7 mm) long with 2" bung adapter for 55-gal drums. Can easily be cut to desired length, on site; 1/2” NPT (F) outlet.

91020-2 1/2" galvanized suction tube for 55-gal containers; (36” long).

275-GAL CONTAINERS

66779-2 For pumping from 275-gal tanks. PVC Stub pumps and pumps diaphragm tube has footvalve for positive priming. Includes 76193 bung adapter, adjustable to approximately 48-1/4 inches. 1" NPT (F) fluid outlet.

65986

91020-1

61601

66779

Industrial-grade Piston Pumps (for oil service)

arozone.com

(800) 495-0276


11 12

Hose Hose Fluid FluidSize ID Length Hose Inlet Outlet Used

Model in ft (m) Material NPT (M) (NPT) With

SIPHON HOSE, CARBON STEEL FITTINGS

622701-6 1" 6 (1.8) Nylon tube with 1" 1" Carbon steel oil-resistant cover siphon tube

STAINLESS STEEL FITTINGS

622702-6 1" 6 (1.8) Nylon tube with 1" 1" Stainless steel oil-resistant cover siphon tube

622702-10 1" 10 (3) Nylon tube with 1" 1" Stainless steel oil-resistant cover siphon tube

Inlet Material FiltersModel Description For Use With

651830 Filter element keeps foreign matter from Adapts to 91020-1 orentering lower pump end -2 pipe extension.

66480 Filter and check valve assembly Used with suction tubes constructed of 316 stainless steel, when fluid is corrosive andassembly has 1" NPT (F) connections viscosity requires a footand 40-mesh screen; 4-3/4" (121 mm) valve for positive priming.long x 2-1/8" (54 mm) in diameter

Wall Mount BracketModel Description For Use With

61113 2" NPT (F) opening for bung-type pumps; 55-gal bung-type pumps andbracket can slip over rim of open-head drum 200 Series, Thunder Series andor be wall-mounted 425 Series stub pumps fitted with

bung adapters

66100 Wall-mount bracket has removable 425 Series, 4" stroke pumpsmounting plate

66101 Wall-mount bracket has removable 425 Series, 6" stroke pumpsmounting plate

Bung AdaptersModel Description For Use With

60870 2" (M) for use with 2-1/8" 200 Series, 1:1 ratio immersed pumpssiphon tube 425 Series, 9:1 ratio immersed pumps

67145-3-B 2" (M) Thunder Series, 3:1 oil pumps

67145-4-B 2" (M) Thunder Series, 5:1 oil pumps

BUNG ADAPTER SEAL KITS

67088-3 Water-tight seal kit includes Thunder Series 3:1 oil pumps67145-3 bung adapterand 67088 seal kit

67088-4 Same as above, except includes Thunder Series 5:1 oil pumps67145-4 bung adapterand 67088 seal kit

66480 651830

61113

67145-X

67145-X-B

Grease Pumps

Grease PumpsWorking Flow Free Flow Fluid Outlet Container Air Inlet

Model ppm (kg/min) ppm (kg/min) in (mm) Size (gal) in (mm)

50:1 PISTON PUMP

2" DIAMETER AIR MOTOR (3" STROKE)

LM2250E-21-B (-22 = BSP thread) 2 ppm (1 kg/min) 9 ppm (4 kg/min) 3/8" (9.5) 35 lb 1/4" (6)




3" DIAMETER AIR MOTOR (3" STROKE)

LM2350E-21-B (-22-B = BSP thread) 4 ppm (2 kg/min) 7.5 ppm (3 kg/min) 3/8" (9.5) 35 lb 1/4" (6)



LM2350E-61-B 4 ppm (2 kg/min) 7.5 ppm (3 kg/min) 3/8" (9.5) 60 lb 1/4" (6)

Grease Pump PackagesControl Drum Follower

Model Description Pump Model Meter Handle Dolly Cover Hose Plate Handle Adapter Z-Swivel

2" DIAMETER AIR MOTOR

LP2001-1-B 35 lb grease package LM2250E-21-B N/A N/A N/A 94420 N/A 640095-2-B 94334 N/A N/A

LP2002-1-B 35 lb grease package LM2250E-21-B N/A 636111 N/A 94420 624201-10 640095-2-B 94334 76493 636077

LP2003-1-B 120 lb grease package LM2250E-31-B N/A N/A N/A 94421 N/A 640165 N/A N/A N/A

LP2004-1-B 120 lb grease package LM2250E-31-B N/A 636111 N/A 94421 624201-10 640165 N/A 76493 636077

LP2006-1-B 120 lb grease package LM2250E-31-B N/A 636111 640058-2 94421 624201-10 640165 N/A 76493 636077

3" DIAMETER AIR MOTOR

LP3001-1 35 lb grease package LM2350E-21-B N/A 636103 N/A 94420 624201-10 640095-2-B 94334 76493 636077

LP3002-1 120 lb grease package LM2350E-31-B 622201-3 N/A N/A 94421 624401-4 640165 N/A N/A N/A

LP3003-1 120 lb grease package LM2350E-31-B N/A 636103 640057 94421 624201-10 640165 N/A 76493 636077

LP3004-1 120 lb grease package LM2350E-31-B N/A 636111 640058-2 94421 624201-10 640165 N/A 76493 636077

LP3005-1 400 lb grease package LM2350E-41-B 622201-3 N/A N/A 94422 624401-4 640015-1 N/A N/A N/A

LP3007-1 60 lb grease package LM2350E-61-B N/A 636111 N/A 71740-1 624401-4 N/A N/A N/A N/A

LP3001-1 LP3003-1

arozone.com

(800) 495-0276


13 14

662402

662605

662400-C

612721 612805

*These pumps are ideal where high pressures are demanded. When higher viscosity lubricants are being pumped, follower plates

(page 16) help maintain a good pump prime and continuous material flow.

**WARNING: These 100:1 pumps deliver pressures up to 10,000 psi, which is in excess of the rated capacity of theaccessories shown in this catalog. These 100:1 pumps can only be used in permanently installed systems where thepump is connected directly to piping with the proper rating for the application.

Grease NLGI 0 – 3 lb

Grease Pump PackagesModel Package Description

HEAVY SERVICE GREASE PUMP PACKAGES

50:1 RATIO, GREASE, 4-1/4" DIAMETER AIR MOTOR

612721 400-lb grease package includes 662400-C pump,621501-05 air hose (5’), 624401-8 material hose (8’), 4148bung adaptor (order follower plate 640015-2 when required)

612805 400-lb grease package includes 662400-C pump,L26241-110 air lubricator, 621501-05 air hose (5’), 624401-8material hose (8’), and 60898 drum cover(order follower plate 640015-2 when required)

100:1 RATIO, GREASE, 6" DIAMETER AIR MOTOR

662606* 120-lb grease package includes 662605 pump, C28241-810 air filter / Regulator / Lubricator, 66715 drum cover, and640152-1 follower plate

662609* 400-lb grease package includes 662608 pump, C28241-810 air filter / Regulator / Lubricator, 71060-1 drum cover, 60870bung adapter, and 640015-5 follower plate

*WARNING: These 100:1 pumps deliver pressures up to 10,000 psi which is in excess of the rated capacityof the accessories shown in this catalog. These 100:1 pumps can only be used in permanently installedsystems where the pump is connected directly to piping with the proper rating for the application.

Grease Pump Accessories

Dollies, Hand Trucks

640058-2

640062

Model Description

DOLLIES

16-GAL DRUM

640057 Platform-type dolly has four swivel casters and three drum clamps; for usewith steel or fiber drums

640058-2 Band-type dolly has four rubber-wheeled casters and screw clamp; for usewith steel or fiber drums

HAND TRUCKS

16-GAL DRUM

640062 Two-wheel truck has clamp rod and two base supports to hold drum;wheels are rubber

640149 Three-wheel truck includes hinged handle, swivel-type front wheel, andtwo 6" rubber rear wheels

Max AirPer Minute Inlet Fluid Fluid

@ 90 psi NPT Inlet NPP Outlet NPT AccessoriesModel lb (kg) in in in Included

50:1 PISTON PUMP

BASIC PUMPS 120-POUND DRUM, 4-1/4" DIAMETER AIR MOTOR (4" STROKE)*

662402 6 (2.7) 1/2" (F) Immersed 1/2" (F) Pump only

400-LB DRUM, 4-1/4" DIAMETER AIR MOTOR (4" STROKE)

662400-C 6 (2.7) 1/2" (F) Immersed 1/2" (F) Pump only

100:1 PISTON PUMP

BASIC PUMPS 120-LB DRUM, 6" DIAMETER AIR MOTOR (4" STROKE)

662605** 2.1 (.8) 1/2" (F) Immersed 1/2" (F) F/R/L C28241-810

400-LB DRUM, 6" DIAMETER AIR MOTOR (4" STROKE)

662608** 2.1 (.8) 1/2" (F) Immersed 1/2" (F) F/R/L C28241-810

640149

640057

High-pressure Wash and Tire-Fill Pump Package

High-power cleaning solutions

Perfect for cleaning:

Cars and trucksEnginesConstruction equipmentAircraftFarm equipmentPlant structuresRailroad equipmentFleet vehicles

Fluid AirMax Cycles cu in Packings Outlet Inlet

Per Minute Per (L) Type / Material Fluid NPT NPTModel Ratio gal (L) gal (L) Per Cycle Upper Lower Inlet in in

BASIC PUMPS

STUB 4-1/4" DIAMETER AIR MOTOR / 4" STROKE

613100-1 10:1 3.9 (14.8) 21 (5.5) 11 (0.18) Buna N Buna N Barbed 3/8" (F) 1/2" (F)

with the application of:

DegreasersDetergentsCleaning solutionsWaterMetal brightenersAluminum brighteners

Model Description

SPRAY WASH PUMP PACKAGE

613104 4-1/4" High-pressure wall-mounted spray packageincludes 613100-1 pump, 61113 wall bracket, 61139-1 55-gal suctiontube assembly, 622427-40 material hose (40'), 641523 control handle,61133 spray wand, TP6250-18 spray tip and L26241-010 Air Linelubricator

arozone.com

(800) 495-0276

Image TBD


15 16

94420

94422

71060-1

Drum CoversModel Description For Use With

5 GAL / 35-LB PAIL

94420 Has 2" NPT (F) bung opening and three Thunder Series 5-gal bunghold-down screws (fits 10.23" – 12" OD drums) pumps

16 GAL / 120-LB DRUM

66492 Has pump opening, mounting holes, and Models 662402tie-down brackets; order tie-down rods and 662409separately (fits 12.75" – 15" OD Drums)

94421 Has 2" NPT (F) bung opening and three hold- Thunder Series 16-gal /down screws (fits 13-1/8" – 14-7/8" OD drums) 120 lb bung pumps

55 GAL / 400-LB DRUM

71060-1 Has 2" NPT (F) bung opening and 200 Series and 425 Series,tie-down brackets; order tie-down rods 55-gal / 400-lb bung-typeseparately (fits 20" – 24-5/8" OD drums)

94422 Has 2" NPT (F) bung opening and 55-gal drum coverthree hold-down screws; bung pumps models LM2250E-41-B(fits 21-7/8" – 23-5/8" OD drums) and LM2350E-41-B

Cover Tie-down RodsModel Description For Use With

16-GAL / 120-LB DRUM

640164 Tie-down bracket kit fixes / holds down Thunder Series pumps.drum cover. Includes brackets, rods, mounting hardware. Use with 94421 Cover.

640091 Set of two tie-down rods and mounting Series 200 and 425, 16-gal /brackets. Use with 66492 Cover. 120-lb drum covers

55-GAL / 400-LB DRUM

71027-1 Set of two tie-down rods and mounting Thunder Series, also 200 andbrackets. Use with 71060 cover. 425 Series, 55-gal /400-lb

drum covers

640091

640164

Pumps LiftsModel Description For Use With

SINGLE-POST LIFT

640225 Air-operated lift for 16 gal / Thunder Series120# container size. LM2250E-31-BExtended height 62 in (1.6 m). LM2350E-31-BSuggested drum cover 94421. LM2305A-31-B

640067 Single-acting cylinder for easy 425 Series,55-gal /400-lb drum change-over. Thunder SeriesRequires 71060-1 drum cover.Extended height 92 in (2.3 m).

64006764022594421

OD of

Wiper Seal Pump Tube For

Model Material To Be Fitted Use With

35-LB TAPERED PAIL (FITS 10" – 11" ID DRUMS)

640095-1-B Rubber 1" Thunder Series 60:1

640095-2-B Rubber 1-1/2" LM2250E-21-B, LM2350E-21-B

640095-3-B Rubber 2" Hand pumps

120-LB DRUM (FITS 13" – 14" ID DRUMS)

640027 Buna-N 2" Hand pumps

640152 Buna-N 1-7/8" 425 Series, 50:1

640152-1 Buna-N 2-1/8" 600 Series, 100:1

640165 Buna-N 1-1/2" LM2250E-31-B, LM2350E-31-B

400-LB DRUM (FITS 20" – 23" ID DRUMS)

640015-2 Buna-N 1-7/8" 425 Series, 50:1

640015-5 Buna-N 2-1/8" 600 Series, 100:1

640015-1 Buna-N 1-1/2" LM2250E-41-B, LM2350E-41-B

Follower Plates

640095-2-B

640015-1

Bung AdaptersModel Description For Use With

BUNG ADAPTERS

4148 2" (M) for use with 425 Series, 50:1 ratio grease pumps1-7/8" siphon tube

67145-1 2" (M) Thunder Series, 60:1 grease pumps

67145-2 2" (M) Thunder Series, 50:1 grease pumps

BUNG ADAPTER SEAL KITS

67088 Water-tight seal for use Thunder Seriesoutdoors

67145-X

arozone.com

(800) 495-0276


17 18

Diaphragm Pumps3/8" to 2” Fluid Ports


■ Ideal for abrasion and solids-handlingBecause it does not use rotating, sliding seals, like rotary / centrifugal pumps, more process engineers look to Ingersoll Rand / ARO diaphragm pumps for handling tough abrasion applications.

■ Bolted construction for safe reliability and ease of assemblyAll Ingersoll Rand / ARO diaphragm pumps use bolted

construction that process professionals demand. And,

Ingersoll Rand / ARO Non-metallic diaphragm pumps utilize

fasteners that are constructed of 300 Series stainless steel for

maximum chemical resistance.

BBoolltteedd iiss ssaaffeerr — Bolted construction reduces the risk of spillsand environmental contamination, and the attendant,mandatory reports to regulatory agencies that spills can create.

BBoolltteedd iiss rreelliiaabbllee — Bolted construction withstands the heavyloading that diaphragm pumps are subjected to, withoutconcerns of breakage or loosening.

BBoolltteedd iiss eeaassiieerr ttoo aasssseemmbbllee — Our bolted design allows for easypositioning and alignment of parts during reassembly. This is asignificant advantage over band-clamp style pump fasteners,which are difficult to align and hold together during reassembly.

Bolted is less expensive — This design uses standard boltsthat cost significantly less to replace. Non-standard fasteningdevices (such as band clamps) are considered wear parts and are more expensive to replace.

■ Positive priming provides instant start-upsCheck valves are located close to the diaphragm chambers, ensuring a positive prime the first time, every time.

■ Ingersoll Rand / ARO patented unbalanced air valveIngersoll Rand / ARO unbalanced air valve design makes this,and all Ingersoll Rand / ARO diaphragm pumps unstallable.Because the unbalanced valve cannot settle in a neutral positionwhen the pump is shut down, it can’t become stuck, requiringthe operator to hammer on the pump in order to start up again.

•• EElliimmiinnaatteess sshhiiffttiinngg // ffrreeeezziinngg pprroobblleemmss

•• UUsseess ssiiggnniiffiiccaannttllyy lleessss ppoowweerr tthhaann ccoommppeettiittiioonn

•• DDooeess nnoott rreeqquuiirree lluubbrriiccaattiioonn

•• FFoorrggiivviinngg iinn ddiirrttyy aaiirr

■ Broad material selectionIngersoll Rand / ARO offers a wide selection of materials, allowing your choice of the best possible

wetted and non-wetted materials suited to your application.

Why Ingersoll Rand / ARO?Our diaphragm pumps are ideal for pumping oil or other lightfluids such as anti-freeze, water, windshield fluid, fuel, (See UL 79Approved Units) solvents, transmission fluid, and waste oil. Fluidports for Ingersoll Rand / ARO diaphragm pumps range in sizefrom 3/8” to 2” to meet the requirements of any application.

Safety — Bolted fasteners prevent fluid leaks harmful to workers and the environment

Reliability — Unbalanced valve design eliminates valve centering and pump stall-outs,even under low air inlet pressure

Durability — Diaphragms provide four times the life over competitors

Flexibility — Variety of body materials allow you to pump different fluids

Commitment — Ingersoll Rand / ARO diaphragm pumps come with a five-year warranty

Air Inlet Fluid Inlet /Body Materials Diaphragm / NPT (F) Outlet Material Max Flow Compatible Replaces

Model (wetted) Ball Material in in gpm Fluids Model

3/8" PORTS

PD03P-ARS-PTT Polypropylene Teflon 1/4" 3/8" / 3/8" 10.6 Windshield fluid, motor / gear oil, Newtransmission fluid, anti-freeze

PD03P-ARS-PCC Polypropylene Hytrel 1/4" 3/8" / 3/8" 10.6 Windshield fluid, motor / gear oil, Newtransmission fluid, anti-freeze

PD03P-AES-DTT Acetal (groundable) Teflon 1/4" 3/8" / 3/8" 10.6 Solvents New

PD03P-AES-DCC Acetal (groundable) Hytrel 1/4” 3/8" / 3/8" 0.6 Windshield fluid, motor / gear oil, Newtransmission fluid, anti-freeze

1/2" PORTS

PD05P-ARS-PTT-B Polypropylene Teflon 1/4" 1/2" / 1/2" 14.4 Windshield fluid, motor / gear oil, 66605J-344*transmission fluid, anti-freeze

PD05P-ARS-PCC-B Polypropylene Hytrel 1/4" 1/2" / 1/2" 14.4 Windshield fluid, motor / gear oil, 66605J-322*transmission fluid, anti-freeze

PD05P-ARS-PAA-B Polypropylene Santoprene 1/4" 1/2" / 1/2" 14.4 Windshield fluid / anti-freeze 66605J-388*

PD05P-AES-DTT-B Acetal Teflon 1/4" 1/2" / 1/2" 14.4 666056-6A4*

PD05P-AES-DCC-B Acetal Hytrel 1/4" 1/2" / 1/2" 14.4 Windshield fluid, motor / gear oil, 66605H-622*transmission fluid, anti-freeze

66605J-344* Polypropylene Teflon 1/4" 1/2" / 1/2" 13 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

66605J-322* Polypropylene Nitrile 1/4" 1/2" / 1/2" 13 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

66605J-388* Polypropylene Polyurethane 1/4" 1/2" / 1/2" 13 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

1" PORTS

666100-344-C Aluminum Teflon 1/4" 1" / 1" 35 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze, solvents

666100-3C9-C Aluminum Hytrel 1/4" 1" / 1" 35 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

666100-322-C Aluminum Buna 1/4" 1" / 1" 35 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

650717-C Aluminum Viton / Acetal 1/4" 1" / 1" 29 Fuel (UL 79 approved)

1-1/2" PORTS

666150-362-C Aluminum Nitrile / Acetal 1/2" 1-1/2" 90 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

650718-C Aluminum Viton / Acetal 1/2" 1-1/2" 75 Fuel (UL 79 approved)

2" PORTS

666250-9C9-C Aluminum Hytrel 3/4" 2" 172 Windshield fluid, motor / gear oil,transmission fluid, anti-freeze

650719-C Aluminum Viton / Acetal 3/4" 2" 105 Fuel (UL 79 approved)

*These pumps have been superseded and will be discontinued in the near future. See recommended replacements above.

arozone.com

(800) 495-0276

These items available through Pro-Series offering.


20

arozone.com

(800) 495-0276

19

Diaphragm, Air Inlet Fluid Outlet Manifold O-Ring NPT / F NPT / F Max Package

Model Application Material Material in (mm) in (mm) gpm (L/min) Includes

1/2" PORTS

612999-5 Waste oil Polypropylene Nitrile 1/4" (6) 1/2" (13) 11 (42) Wall mount, inlet andevacuation outlet fluid hoses

612999-6 Waste oil Polypropylene Nitrile 1/4" (6) 1/2" (13) 11 (42) Hanging bracket and evacuation outlet hose

670042 Fuels Aluminum Viton 1/4" (6) 1/2" (13) 12 (45.4) Pump only

1" PORTS

650715-C 50 / 50 mix of Aluminum Nitrile 1/4" (6) 1" (25) 35 (133) Pump onlyanti-freeze and water

612999-3 50 / 50 mix of Aluminum Nitrile 1/4" (6) 1" (25) 35 (133) Wall mount, siphon tubes, anti-freeze and water material hoses

612999-4 Waste oil Aluminum Nitrile 1/4" (6) 1" (25) 35 (133) Wall mount, inlet and evacuation outlet fluid hoses

613201-2-C Calcium chloride Aluminum Neoprene 1/4" (6) 1" (25) 35 (133) Inlet and outlet hoses, strainer, tire filling 8' suction hose, control handle,

check valve

Specialty Application Pumps Specifications

650715-CFuel Pump (1" NPTF Outlet)

This 1:1 ratio pump(650715-C) has dual inletsto allow simultaneouspumping and blending ofantifreeze and water.

Calcium Chloride Tire-fill Pump Package

613201-2-CCalcium Chloride Tire-fill Pump Package

Designed for the purpose of evacuating and filling tires with calcium chloride ballastsolution. Package includes a 666100-441-C, 1" port diaphragm pump. Aluminumconstruction with neoprene diaphragms and Teflon® checks for compatibility withcorrosive calcium chloride and 60154 hose / strainer / gun assembly. Also includes check valve and all required clamps and related hardware.

These items available through Pro-Series offering.

Drum Pumps

Choose from aluminum, stainless steel or polypropylene body construction – ARO DrumPumps are available in three body materials for optimum fluid compatibility.

Drum Pump Packages

Package Components Factory-Matched – ARO Drum Pump package components containpre-specified, matching materials of construction for complete fluid compatibility

Drum Pump Packages can be ordered in 3 styles:

- Basic: Pump, bung adapter, air safety shut-off, siphon tube, weather seal and base

- Complete / Transfer: basic pump plus fluid hose or fluid hose with non-drip nozzle

- Complete / Dispensing: basic pump plus foot valve, hose and dispensing nozzle

Pump Features

11-gpm flow capability: drum pumps offer plenty ofcapacity to satisfy a broad range of transfer applicationvolume demands

Stall-free operation: ARO diaphragm drum pumps featurea patented unbalanced air valve design that avoids stall-out, even under low air-inlet pressures

Bolted construction: ARO diaphragm drum pumps utilizebolted fasteners for leak-tight integrity

5-year Warranty

Pro-Series Pumps

Lock OutPump Housing Pump Dia. Valve Foot 10' Hose Dispense Fluid

Model And Seats And Balls (P/N 104253-2) Valve ASM Valve Service

DAB05-PPTT-2-A Polypropylene PTFE (Teflon) X - - - Acids & Caustics

DAB05-PPCC-2-A Polypropylene Hytrel X - - - Oil

DAB05-PPUU-2-A Polypropylene Polyurethane X - - - Water / Oil

DAB05-PPAA-2-A Polypropylene Santoprene X - - - Mild Acids / Mild Caustics

DAB05-PPCC-2-N Polypropylene Hytrel X - Nitrile - Oil

DAB05-PPCC-B-M Polypropylene Hytrel X X Nitrile No-drip Oil

DAB05-PPAA-2-B Polypropylene Santoprene X - EPDM - Mild Acids / Mild Caustics

DAB05-PPUU-2-C Polypropylene Polyurethane X - Vinyl - Water / Oil

DAB05-PPCC-B-J Polypropylene Hytrel X X Reinforced Nitrile X Oil

DAB05-PPAA-B-K Polypropylene Santoprene X X EPDM X Mild Acids / Mild Caustics

DAB05-SSTT-2-A Stainless Steel PTFE (Teflon) X - - - Solvent

DAB05-ASTT-2-A Alum./SS. PTFE (Teflon) X - - - Solvent

DAB05-APCC-2-A Alum./Poly. Hytrel X - - - Oil / Some Solvents

DAB05-APCC-2-0 Alum./Poly. Hytrel X - Nitrile - Oil / Some Solvents

DAB05-APCC-B-P Alum./Poly. Hytrel X X Nitrile No-drip Oil / Some Solvents

DAB05-APCC-B-D Alum./Poly. Hytrel X X - X Oil / Some Solvents

DAB05-APCC-B-L Alum./Poly. Hytrel X X Reinforced Nitrile X Oil /Some Solvents

DAB05-ASAA-2-A Alum./S.S. Santoprene X - - - Water

FPOMax Suspended

Displacement Air Inlet Fluid Fluid Operating Solids Max ShippingMax Flow per cycle NPT / F Inlet Outlet Pressure Diameter Weight

Ratio gpm (L/min) gal (L) in (mm) NPT NPT / F psi (bar) in (mm) lb (kg)

1:1 RATIO DRUM PUMP PERFORMANCE SPECIFICATIONS

1:1 11 (41.6) .039 (.15) 1/4 - 18 Siphon 1/2 - 14 100 (6.8) 3/32" (2.4) 22 (10) Polypropylene, basic packageTube for 26 (11.8) Aluminum, basic package

55-gal Drum 36 (16.3) Stainless, basic package


21 22

arozone.com

(800) 495-0276

Max Suspended Max DryMax Displacement Gas Inlet Fluid Fluid Exhaust Operating Solids Max SuctionFlow per cycle Female Inlet Outlet Port Pressure Diameter Weight Lift

Model Ratio gpm (L/min) gal (L) NPT / F NPT / F NPT / F NPT psi (bar) in (mm) lb (kg) ft (m)

1/2" PORTS

PG05A-AAS-FGG-B 1:1 12.0 (45.4) 0.039 (0.15) 1/4 - 18 1/2 - 14 1/2 - 14 3/8-18 100 (6.9) 3/32" (2.4) 10.4 (4.7) 9.1 (2.8)

1" PORTS

6661H0-1C9-C 1:1 35 (133) 0.16 (0.60) 1/4 - 18 1 - 11-1/2 1 - 11-1/2 3/8-18 120 (8.3) 1/8" (3.2) 19 (8.6) 20 (6.1)

PG05A-AAS-FGG-B 6661H0-1C9-CGrounding strap

included with pump

Natural Gas Driven Diaphragm PumpsFrom ARO, the world-leader in stall and ice-free pump technology, comes three new natural gas driven diaphragm pump models. Introducing the new CSACertified diaphragm pumps. CSA (Canadian Standards Association) is internationally known for standards and certification of equipment that is powered bynatural gas. These pumps are the ideal answer to fluid handling operations in remote locations, such as oil and gas facilities, where sweet natural gas is anavailable energy source. Combined with ARO’s patented valve technologies, these gas-driven pumps have the wetted and body materials to deliver superiorfluid compatibility and performance in a portable package.

Features

Ice-free, stall-free operation

Bolted construction for leak-tight material integrity

All-metal construction

Flows up to 133 LPM

Lube-free operation

Grounding strap included with pump

Ported exhaust

5-year warranty

CSA Certified: meets the CSA U.S. / Internationalrequirement No. 2.01 for natural gasoperated diaphragm pumps

Diaphragm Pump Accessories

67234

637336

621514-10, 95200, 95199

635129

Hose and dispensing bibb

Hose, swivel, and dispensing nozzle

Foot valve

Tank Adapter

Drum adapter kit

621516-10

621523-10

Hose and non-drip nozzle

55-gal drum bung adapter kitsKit contains base, bung adapter, bung seal, siphon tube, weather seal, and hardware.

Model Base Material Tube Material Weather Seal Base Seal

67231 Polypropylene Polypropylene UHMW PE Viton

67231-6 Aluminum Stainless Steel Viton Viton

67231-7 Stainless Steel Stainless Steel Viton Viton

Note: Fasteners are 300 Series Stainless Steel

Note: Hose requires 95189 to adapt to 1/2” port.

Dispensing

For Fittings Nozzle Used With

Model Material Use With End / End (order separately)

621517-10 Nitrile Polypropylene Cam / bare N/A

621516-10 Nitrile Polypropylene Cam / brass 6351291/4"-18 NPT male

621523-10 Nitrile Polypropylene Cam / non-drip N/Anozzle

621515-10 EPDM Polypropylene Cam / bare N/A

621519-10 Vinyl Polypropylene Cam / bare N/A

621514-10 EPDM Polypropylene Cam / 1” NPT 95199

622514-10 Nylon Polypropylene 1/2” NPT / 1/2” NPT316 stainless steel

621518-10 Nitrile Aluminum Cam / bare N/A

621520-10 Nitrile Aluminum Cam / brass 6351291/4"-18 NPTF

621524-10 Nitrile Aluminum Cam / non-drip nozzle N/A

Fluid Dispensing Nozzles

Model Description

95199 Composite Nozzle High-flow nozzle works like gasoline nozzle; features toughcomposite (polypropylene) construction for caustic service

95200 Swivel 1” (M) X 1” NPT (F) Polypropylene hose swivel attaches between hose anddispensing nozzle and allows operator to rotate freely; use with 95199

95183 Oil Tapper Easy-pull tapper attaches directly to pump outlet port and provideseven flow dispensing; aluminum construction for oil service

77617 Oil Tapper Fitting Plated carbon steel 1/2"-14 NPTF x 3/8"-18 NPTF -1; used toattach 95183 oil tapper to 1/2” aluminum pump

635129 Bibb with Trigger 1/4” NPT(F) inlet, zinc die casting with brass, and nitrile seals forwater or oil service; radiator-type bibb has 1/4” fluid inlet and non-drip tip

Pump Outlet Adapter 95189 Composite Fitting - 1/2” NPT (in) x MaleCam adapter (polypropylene)

95190 Aluminum Fitting - 1/2” NPT (in) x MaleCam adapter (aluminum)

Bulk tank adapter kitsKit contains base, threaded adapter, and hardware.

67234 Polypropylene / Viton O-ring seal

67234-7 300 series stainless steel

Foot valvesRecommended for use with dispensing nozzle. Assembly includes housing, ball check, and O-ring.

637336 Polypropylene with Viton O-ring and ball. Use with 67231.

637337 Stainless steel with Viton O-ring and ball. Use with 67231-6 or 67231-7.

Hose 1/2” ID hose comes in 10-foot lengths.


2423

arozone.com

(800) 495-0276

Suction TubesModel Description Pumps Used With

SUCTION TUBES

91020-1 1/2" galvanized suction tube for 1/2" diaphragm pumps5-gal containers; 16” long pumps

55-GAL

65986-1 Siphon tube has 6' long, 3/4" ID hose Drum cover for closedwith 3/4" NPT (M) outlet; hose is drum with 2" bungNeoprene over Thiokol opening

66779 For pumping from 55-gal drum; PVC Stub pumps and diaphragmtube has foot valve for positive priming; pumpsincludes 76193 bung adapter, adjustableto approximately 35-1/2"; 1" NPT (F) fluid outlet

61409 For pumping from 55-gal drum; 90° PVC 1/2" diaphragm pumpssiphon tube, 35-1/2" long with 2" bung and stub pumpsadapter for 55 gal drums that can easily becut to desired length on site; 1/2” NPT (F)outlet

275-GAL CONTAINERS

61412-1 For pumping from 275-gal tank; 1/2" diaphragm pumpThreads directly into pump inlet,includes 2" bung adapter 45-1/2" long; schedule 80 PVC pipe can easilybe cut to desired length on site;1/2" NPT (M) fluid outlet

Wall-mount BracketModel Description Pumps Used With

DIAPHRAGM PUMPS

76763 Wall-mount bracket allows 1/2" diaphragm pumpspump to be located convenientto container

66100 Wall-mount bracket has 1" diaphragm pumpsremovable mounting plate

62133 Wall-mount bracket 1-1/2" diaphragm pumps

76763

66100

6141291020-1 66779

Hose Reels

6358Low-pressureHeavy-duty Reel

This new composite hose reel providesexcellent durability at a great value. Allcomposite reels are made of a toughglass-filled composite material combinedwith a strong steel base.

Max Hose Inlet / Outlet DimensionsPerformance Pressure Length Hose ID NPT Length Width Height Spool

Model Rating psi ft in in in in in Material Use

LOW-PRESSURE HOSE REELS

6332 Heavy-duty 300 35 1/2" 3/8" / 1/2" 17.75" 7" 20.37" Composite Air, water, compatible solvents

6338 Heavy-duty 300 35 3/8" 3/8" / 3/8" 17.75" 7" 20.37" Composite Air, water, compatible solvents

6358 Heavy-duty 300 50 3/8" 3/8" / 3/8" 17.75" 7" 20.37" Composite Air, water, compatiblesolvents, nitrogen

6358G Heavy-duty 300 50 3/8" 3/8" / 3/8" 17.75" 7" 20.37" Composite Air, water, compatiblesolvents, nitrogen

MEDIUM-PRESSURE HOSE REELS

6432 Heavy-duty 2000 35 1/2" 1/2" / 1/2" 17.75" 7" 20.37" Composite Oil, anti-freeze

Note: All models supplied with hose.


2625

arozone.com

(800) 495-0276

Ultra-duty Hose ReelsFully redesigned with you in mind

The Ingersoll Rand / ARO ultra-duty hose reels offer improved strength anddurability in a hose reel design. The versatile guide arm adjusts forconvenient wall, floor, and ceiling mounting positions. Models are availablefor air, water, oil, and fluid service. The Safety-Reel™ design (SR models)features a controlled retraction mechanism to reduce property damage andimprove operator safety.


Spun steel disc design for added strength and durability

Containerized spring motor for fast and convenient maintenance

Solid steel axle with precision bearings for smooth rotation

Safety-Reel models feature 80% slower retraction to reduce propertydamage and improve operator safety

Fast, convenient maintenancefor normal external wear items like swivel seals to eliminate

dismounting for repairs

Versatile mounting armenables positioning on walls, floors, vehicles, and overhead

Cartridge-style containerizedspring motor allows for easy, safe

replacement with just two bolts

Improved operator safetywith 80% slower retraction

for Safety-Reel models

1/4" bent steel base with dual- ortriple-axle support for greater

stability and less vibration

Hose ID Inlet / Outlet NPT Length Weight Model in (mm) in (mm) ft (m) psi (bar) lb (kg)

ULTRA-DUTY

LOW-PRESSURE — AIR / WATER

7UL3035 3/8" (9) 3/8" (9) 35' (11) 300 (21) 38 (17)

7UL3050 3/8" (9) 3/8" (9) 50' (15) 300 (21) 43 (20)

7UL3050-SR 3/8" (9) 3/8" (9) 50' (15) 300 (21) 43 (20)

7UL4030 1/2" (13) 1/2" (13) 30' (9) 300 (21) 45 (20)

7UL4050 1/2" (13) 1/2" (13) 50' (15) 300 (21) 48 (24)

7UL4050-SR 1/2" (13) 1/2" (13) 50' (15) 300 (21) 48 (24)

MEDIUM-PRESSURE — OIL / FLUID

7UM4025 1/2" (13) 1/2" (13) 25' (8) 2,500 (172) 49 (23)

7UM4025-SR 1/2" (13) 1/2" (13) 25' (8) 2,500 (172) 49 (23)

7UM4050 1/2" (13) 1/2" (13) 50' (15) 2,500 (172) 67 (30)

7UM4050-SR 1/2" (13) 1/2" (13) 50' (15) 2,500 (172) 67 (30)

HIGH-PRESSURE — GREASE

7UH3025 3/8" (9) 3/8" (9) 25' (8) 4,000 (276) 49 (22)

7UH3025-SR 3/8" (9) 3/8" (9) 25' (8) 4,000 (276) 49 (22)

7UH3050 3/8" (9) 3/8" (9) 50' (15) 4,000 (276) 65 (30)

7UH3050-SR 3/8" (9) 3/8" (9) 50' (15) 4,000 (276) 65 (30)


Supreme-duty Hose ReelsFully redesigned with you in mind

The supreme-duty series is designed for vehicle or heavy-duty applicationsrequiring extra life and enhanced durability. The dual pedestal design offerstriple-axle support points for improved strength and stability. Models are available for air, water, and fluid service. The Safety-Reel design features a controlled retraction mechanism to reduce property damage and to improveoperator safety.


Offers triple axle support

Dual-pedestal design excellent for vehicle applications

Spun steel disc design for added strength and durability

Safety-Reel feature 80% slower retraction to reduce property damage andimprove operator safety

Adjustable guide arm for wall, floor, and ceiling mounting positions



Longevity and durabilityfrom normal wear items

like swivel seals to eliminatedismounting for repairs

Versatile mounting arm - positions include wall, floor,

vehicle, and overhead

Cartridge-style containerizedspring motor allows for easy, safe replacement

with just two bolts

1/4” bent steel basewith dual- or triple-axle

support for greater stabilityand less vibration

Hose ID Inlet / Outlet NPT Length Weight Model in (mm) in (mm) ft (m) psi (bar) lb (kg)

SUPREME-DUTY

LOW-PRESSURE — AIR / WATER

7SL3050-SR 3/8" (9) 3/8" (9) 50' (15) 300 (21) 61 (28)

7SL3075-SR 3/8" (9) 3/8" (9) 75' (23) 300 (21) 82 (37)

7SL4050-SR 1/2" (13) 1/2" (13) 50' (15) 300 (21) 63 (29)

7SL4075-SR 1/2" (13) 1/2" (13) 75' (23) 300 (21) 82 (37)

MEDIUM-PRESSURE — OIL / FLUID

7SM4050-SR 1/2" (13) 1/2" (13) 50' (15) 2,500 (172) 77 (35)

HIGH-PRESSURE — GREASE

7SH1100-SR 1/4" (6) 1/4" (6) 100' (30) 5,000 (345) 104 (47)



27 228

arozone.com

(800) 495-0276

Auxiliary ReelsPower cord reels

50' x 16-gauge AWG cord for electrical applications up to 13 amps (115 volts)

Features an optional fluorescent angle light with tool tap plug

Available with a single industrial-type 3-prong receptacle (115 volts)

Safety-Reel™ feature 80% slower retraction to reduce property damageand improve operator safety

Adjustable guide arm for wall, floor, and ceiling mounting positions

Cartridge-style containerizedspring motor allows for easy, safe

replacement with just two bolts



1/4" bent steel base with dual-or triple-axle support for greater

stability and less vibration

Versatile mounting armenables positioning on walls,floors, vehicles, and overhead

Max VoltageAWG Rating Rating Length Weight

Model Rating amps volts ft (m) lb (kg) Notes

AUXILIARY REELS

ELECTRIC CORD

7E16050A-SR 16 GA 13 115 50' (15) 36 (16) Comes with plug

7E16050D-SR 16 GA 13 115 50' (15) 37 (17) Comes with light


Option A Option D

Mounting Accessories for Hose Reels

Accessory Model Compatible With Features

Overhead mounting bracket IR-7001 Ultra-duty and Overhead mounting bracket for I or H beam, 5" x 6" flangeelectric cord reel

Overhead mounting bracket IR-7009 Supreme-duty Overhead mounting bracket for I or H beam,8" x 9" flange

Wall-mount swing bracket IR-7002 Ultra-duty and 180° swing bracket for vertical mountingelectric cord reel

Floor-mount swivel bracket IR-7003 Ultra-duty, 345° swivel bracket for horizontal mountingsupreme-duty,

electric cord reel

Ceiling-mount bracket, IR-7004 Ultra-duty, Easy installation bracket, reel slides in and out for easyrequired with IR-7005 electric cord reel overhead mounting; must be ordered with IR-7005 for I

or H beam installation

I or H beam adapter, IR-7005 Ultra-duty, Easy installation bracket, I or H beam adapter; requires IR-7004 electric cord reel must be ordered with IR-7004.

Wall-mount swing bracket IR-7006 Supreme-duty 180° vertical mounting bracket; powder-coatedcrinkle black

Reelcraft adapter plate IR-7007 Custom adapter bracket for Reelcraft models4000, 5000, 5806, and 7000 Series;3” x 5” and 4” x 5” base patterns

Graco adapter plate IR-7008 Custom adapter bracket for Graco 500 Series 3” x 5”and 4” x 5” base patterns

#IR-7001 #IR-7002 #IR-7003 #IR-7004 #IR-7005 #IR-7006 #IR-7009


29 30

arozone.com

(800) 495-0276

635190-XOrder protective boot74066 separately.

Control HandlesNon-metered Fluid Control Handles

Max Fluid

working Inlet

Pressure NPT (F) Fluid

Model Description psi (bar) in Outlet

MOTOR OIL, GEAR OIL, TRANSMISSION FLUID

HIGH-VOLUME

635193 Has flexible rubber hose with . 600 (41) 3/4" 629212non-drip nozzle; use with 1:1and 3:1 pumps; Non-drip tip

635395-2 Has flexible rubber hose with 900 (63) 3/4" 629212non-drip nozzle; use with 5:1and 9:1 pumps; non-drip tip

STANDARD-VOLUME

635392 Has flexible rubber hose, built-in 1,000 (69) 1/2" 60164swivel and filter, and non-dripnozzle; non-drip tip

635399 Has flexible rubber hose, built-in 1,000 (69) 1/2" 70790swivel, and right-angle non-dripnozzle; non-drip tip

WATER, ANTI-FREEZE

635129 Radiator bibb 300 (21) 1/4" Non-drip tip

635193

635399

635392

Digital, Metered Fluid Control HandlesOur metered control handle features a patented oval gear wheeldesign for precise and reliable measurement. Its digital LCDreadout operates on two standard alkaline batteries.

Fluid

Max Flow Meter / Max Working Inlet

Rate Totalizing Pressure NPT (F) Fluid

Model gpm (L) Increments psi (bar) in Outlet

METERED, RIGID NOZZLE MODELS

635390-11 4 (15) Pints / gallons 1,000 (69) 1/2" Non-drip tip

635390-22 4 (15) Quarts / gallons 1,000 (69) 1/2" Non-drip tip

635390-33 4 (15) Liters / liters 1,000 (69) 1/2" Non-drip tip

NON-METERED, RIGID NOZZLE MODELS (HANDLE AND NOZZLE ONLY)

635391-11 4 (15) - 1,000 (69) 1/2" Non-drip tip

METERED, FLEXIBLE NOZZLE MODELS

635390-1 4 (15) Pints / gallons 1,000 (69) 1/2" Non-drip tip

635390-2 4 (15) Quarts / gallons 1,000 (69) 1/2" Non-drip tip

635390-3 4 (15) Liters / liters 1,000 (69) 1/2" Non-drip tip

NON-METERED, FLEXIBLE NOZZLE MODELS (HANDLE AND NOZZLE ONLY)

635391-1 4 (15) - 1,000 (69) 1/2" Non-drip tip

METER ONLY

635190-1 4 (15) Pints / gallons 1,000 (69) 1/2"

635190-2 4 (15) Quarts / gallons 1,000 (69) 1/2"

635190-3 4 (15) Liters / liters 1,000 (69) 1/2"

METER, CONTROL HANDLES (WITHOUT NOZZLES)

635390-10 4 (15) Pints / gallons 1,000 (69) 1/2"

635390-20 4 (15) Quarts / gallons 1,000 (69) 1/2"

635390-30 4 (15) Liters / liters 1,000 (69) 1/2"

• Lightweight • Precise

• Fast reset • Totalizes 635390-X

635391-1

635391-11

635390-XX

Non-drip Nozzle / Hose635365

635360-2

629226

629521

629516

6786

Fluid Max Working

Inlet Length Pressure

Model Description NPT in (mm) psi (bar)


629212 Non-drip nozzle / hose 3/4" (M) 12" (305) 900 (62)

629226 Non-drip nozzle / hose 1/2" (M) 11" (279) 900 (62)

629516 Non-drip nozzle / hose 1/2" (M) 13" (330) 1,000 (69)

629521 Right-angle nozzle / hose 1/2" (M) 15" (381) 1,000 (69)

6786 Right-angle, rigid, non-drip nozzle 1/4" (M) 6-1/2" (165) 1,000 (69)

60798 Rigid, non-drip nozzle 1/2" (M) 5-1/2" (133) 1,000 (69)

NOZZLE, FLEXIBLE HOSE, WITH NON-DRIP TIP

629245-1 Flexhose, non-drip tip 1/2" (M) 15" (381) 1,000 (69)

NOZZLE, RIGID TUBE WITH NON-DRIP TIP

629245-2 Rigid tube, non-drip tip 1/2" (M) 13" (330) 1,000 (69)

Metered Fluid Control HandlesUnits Of Totalizing Working Inlet

Model Measure Increments Pressure Size Fluid Outlet

PRESET, DIGITAL METERED FLOW CONTROL

Preset unit automatically shuts off when set quantity of fluid is delivered and meter indicator returns to zero. Totalizer registers up to 9,999 units.

635360-2 Quarts Gallons 1,000 (69) 1/2" Non-drip flexextension

635360-22 Quarts Gallons 1,000 (69) 1/2" Non-drip rigidextension

635360-3 Liters Liters 1,000 (69) 1/2" Non-drip flexextension

635360-33 Liters Liters 1,000 (69) 1/2" Non-drip rigidextension

PRESET, METERED FLOW CONTROL

Preset unit automatically shuts off when set quantity of fluid is delivered and meter indicator returns to zero. Totalizer registers up to 9,999 units.

635364 1 to 60 quarts Gallons 1,000 (69) 1/2" 9/16" diameternon-drip tip

635365 1 to 60 gallons Gallons 1,000 (69) 1/2" 9/16" diameternon-drip tip

635367 1 to 60 liters Liters 1,000 (69) 1/2" 9/16" diameterwith auto shut-off non-drip tip


31

arozone.com

(800) 495-0276

Control Handle Accessories

High-pressure Grease Control Handles

636103

629742

636101 636111

Max Working Fluid Inlet Fluid

Pressure NPT (F) Outlet

Model Description psi (bar) in in

GREASE CONTROL HANDLES

636101 Dispenses lubrication at line 7,500 (517) 3/8" (F) 11/16" – 16 (M)pressure for lubricating grease or 1/8 NPT (F)fittings; does not include nozzleor hydraulic coupler; for applicationsrequiring high-flow capacity;remove the 1/8" (M) x 3/8"(M) adapter for 3/8" (F) porting

636111 Dispenses lubricant at line 7,500 (517) 1/8" (M) Hydraulicpressure for lubricating grease or 3/8" (F) couplerfittings; includes inlet materialfilter and curved nozzle with hydrauliccoupler; remove the 1/8" (M) x 3/8" (M)adapter for 3/8" (F) porting

636103 High-pressure booster handle 7,500 (517) 1/8" (M) Hydraulicdelivers line pressure for normal or 3/8" (F) couplerlubrication; trigger booster featuredelivers 10,000 psi (689 bar) to loosentougher fittings; includes curved nozzlewith hydraulic coupler, inlet materialfilter and manual pressure vent for easydisconnection; do not use with whip hose

WHIP HOSES FOR GREASE CONTROL HANDLES*

629742 Extra-long, wire braid (624201-02) 5,000 (345) 1/8" (F) 636046whip hose with hydraulic coupler hydraulicand swivel; overall length of29-1/2" (749 mm); for use withcoupler 636111 high-pressurecontrol handle; allows operator toaccess hard-to-reach fittings

*WARNING: Not for use with 636103 high-pressure booster handle.

Model Description

WATER, ANTI-FREEZE, WINDSHIELD FLUID

635129 Fluid dispensing nozzle — 635129 bibb with trigger 1/4" NPT(F) inlet, zinc die casting with brass, and nitrile seals for water or oil service; radiator-type bibb has 1/4" fluid inlet and non-drip tip

635129

32

Hand-operated Pumps

Grease NLGI 0 – 3 lbModel Description

LUBRICATION PUMPS, 35-LB, DRUM COVER TYPE

611016 Ball joint lubricator — Can deliver up to 1/4 oz of lubricantper stroke; includes 72006 drum cover, 622511-10 hose assembly,640095-3-B follower plate, and 72806 booster control handle; controlhandle capable of generating up to 7,500 psi

Motor Oil, Gear Oil, Transmission FluidModel Description


5-GAL

611170 Capable of high-volume delivery; includes 621597-5hose / dispensing, 2:1, 4:1, 7:1 nozzle assembly with 5', 1/2" ID hose and 72006 drum cover

611016

611170Container not included.


33 34

arozone.com

(800) 495-0276

Hand-held Grease Guns

550Heavy-duty Grease Gun

This heavy-duty grease gun has a comfortgrip handle and can develop up to 10,000 psi.Features include an easy-to-load lockingplunger, an ergonomic T-handle, and a fillernipple and air vent. The 550 comes standardwith a 6" angle extension and an 18" whiphose, both with a four-jaw coupler.


This heavy-duty grease gun has a comfortgrip handle and can develop up to 7,500 psi.Features include an easy-to-load lockingplunger, an ergonomic T-handle, and a filler nipple and air vent. The 570 comes standardwith a 3.5" straight extension and an 18"whip hose, both with a four-jaw coupler.


This heavy-duty grease gun has a 40:1pressure ratio, an easy-to-load lockingplunger, an ergonomic T-handle, and a fillernipple and air vent. The 590 comes standardwith a 6" angle extension with a four-jawcoupler.

5190Ultra-duty Grease Gun

A new, ergonomic design, the 5190 greasegun has a handle that can be swiveled 180º from the cartridge. The larger handleimproves comfort while still packing a 40:1pressure ratio.

Max Input Max OutputPerformance Pressure Pressure Grease

Model Rating psi psi Coupler Included

HAND-HELD GREASE GUNS

550 Heavy-duty Hand lever 10,000 4-jaw coupler 6" extension and 18" whip hose

570 Heavy-duty Hand lever 7,500 4-jaw coupler 3.5" extension and 18" whip hose

590 Heavy-duty 150 6,000 4-jaw coupler 6" extension

5190 Ultra-duty 150 6,000 4-jaw coupler 6" extension

Fittings and Accessories

Grease Gun AccessoriesButton head coupler

636020

Standard button coupler. Can be converted to eitherpush-on or pull-on.

636024

Standard button coupler. Can be converted to eitherpush-on or pull-on.

636024

Inlet Thread Max Working

Connection Length Pressure

Model in in (mm) psi (bar)

636020 7/ 16"– 27 ( F) – 8,000 (552)

636024 1/8" NPT (F) – 8,000 (552)

Standard Hydraulic Couplers

636027

Small diameter hydraulic coupler.

636028

Reversible jaw hydraulic coupler.

636046

Small diameter hydraulic coupler with ball check.

636028

636046

Swivels

Size NPT Model Description in

636077 Z Swivel 1/8" (M) x 1/8" (F)

636086- B Z Swivel 1/4" (M) x 1/4" (F)

636087- B Z Swivel 1/4" (M) x 1/4" (F) with filter element

635106 Z Swivel 1/2" (F) x 3/8" (M)

636075 Straight Swivel 1/8" (M) x 1/8" (F)





676 Male Adapter 1/8" (M) x 1/8" (M)

Inlet Thread Max Working

Connection Length Pressure

Model in in (mm) psi (bar)

636027 1/8" NPT (F) 1-5/8" (41) 6,000 (414)

636028 1/8" NPT (F) 1-5/8" (41) 10,000 (689)

636046 1/8" NPT (F) 1-7/16" (37) 6,000 (414)

635108 676636075636077


35 36

arozone.com

(800) 495-0276

Grease Fitting Accessories

6000 6009 6004 6005

6008

6006 6028 6041

6056 6070

640049

6045

636054

Model Description

GREASE FITTING EASY-OUT TOOLS

636053 Four function tool • Easy-out for removing broken fittings• 1/8" NPT tap• 3/8" socket for removing hydraulic fittings• 7/16" socket for removing hydraulic fittings

636054 Four function tool • Easy-out for removing broken fittings• 1/4"-28 tap• 5/16" socket for removing hydraulic fittings• 3/8" socket for removing hydraulic fittings

Thread

Size NPT Height

Model Description in in

STRAIGHT

6000 Straight 1/8" (M) 21/32"

6001 Straight 1/8" (M) 1-1/4"

6026 Straight 1/4" (M) 7/8"

6009 Short straight 1/4" – 28 17/32"

6010 Long straight 1/4" – 28 11/16"

ELBOW

6 6004 30° elbow 1/8" (M) 29/32"

6005 45° elbow 1/8" (M) 7/8"

6011 45° elbow (short) 1/4" – 28 13/16"

6006 65° elbow 1/8" (M) 7/8"

6028 67-1/2° elbow 1/4" (M) 1-5/32"

6013 90° elbow (short) 1/4" – 28 3/4"

DRIVE TYPE FITTINGS

6 6060 Straight 5/16" serrated 5/8"

6056 Straight 1/4" serrated 37/64"

6069 Straight 3/16" serrated 19/32"

6070 Straight 3/16" serrated 37/64"(less spring and ball)

ELBOW BODIES

6 6045 90° elbow 1/8" (M) x 1/8" (F) 1

BUTTON-HEAD FITTINGS

2087* Standard 1/8" (M) 13/16"

6041 Giant 1/2" (M) 1-3/32"

Quantity Model Description

100-piece selection of the most common grease fittings packaged in a five-compartment plastic container.

20 6000 1/8" NPT (M) straight

50 6009 1/4"-28 (M) short straight

10 6004 1/8" NPT (M) 30° elbow

10 6006 1/8" NPT (M) 65° elbow

10 6013 1/4"-28 (M) 90° elbow

Grease Fitting Assortment -640049*POA status pricing required.

General Installation Accessories

Overrun Controls, Pressure Relief Valve

23644-400

635040

640153

Pressure Relief Valve / Valve KitModel Description

PRESSURE RELIEF VALVE / VALVE KITS

61117 Pressure relief valve is used on material outlet side of pump to automatically allow bleed-back of material to container in applications where thermal expansion is present.

61118 Pressure relief valve kit includes 61117 relief valve, reducing bushing, compression coupling, 3' of plastic drain tubing, and grommet (for drum attachment)

Pump run away happens

when a material container

is depleted and the pump

cycles fast and needlessly.

It's not good. So, protect

your pump investment

with an ARO-STOP® valve.

Protect your investment

Air Inlet Air Outlet Pressure

NPT(F) NPT(F) Range For

Model in in psi Use With

ARO-STOP® VALVES

ARO-STOP valves shut off air to pump when material container is empty or fluid line is broken. Both havequick-set and reset features.

635040 1/4" 1/4" 20 – 175 Thunder Series and(1.4 - 12) 200 Series and1/2” diaphragm pump

(max flow rate of 23 scfm @ 90 psi) (includes connecting hose)

23644-400 1/2" 1/2" NPT (M) 20 – 175 425 Series and 600 Series only(1.4 - 12) and 1” diaphragm pump

Air Inlet Air Outlet Pressure

NPT (F) NPT (F) Range For

Model in in psi (bar) Use With

LOW-LEVEL CUTOFF

Low-level cutoff prevents the entry of air into the fluid line by closing the pump intake when material supply is exhausted. Threads to bottom of siphon tube for immersion in fluid. Also serves as a check valve.

640153 – – – 200 Series and 425 Series pumps with 1-1/2"NPT (F) threads (not for pumps that exceed 6GPM), Thunder Series 3” air motor pumps


3837

arozone.com

(800) 495-0276

InstallationAccessories65986-1

Siphon tube with 6' hose for 55-gal drum with 2" bung. For use with Thunder Series anddiaphragm pumps.

61601

Siphon tube with 6' hose for 55-gal drum for wall-mountedpump. For use with ThunderSeries pump.

66779

Siphon tube for 55-gal drum. For use with Thunder Series and diaphragm pumps.

66779-1

Siphon tube for 55 gallon drum.For use with Thunder andDiaphragm Pumps.

66779-2

Siphon tube with 6' hose for 275 Series container. For use with Thunder Series anddiaphragm pumps.

622701-6

6' siphon hose. For use withThunder Series and diaphragmpumps.

61113

Wall-mount for stub pumps. For use with Thunder Series pump.

61412

Siphon tube for 1/2" diaphragm pump.

76763

Wall-mount for 1/2" diaphragm pumps.

66100

Wall-mount for 1" diaphragm pumps.

61118

Pressure relief valve kit.

95183

Oil tapper 3/4" NPT inlet.

77617

Oil tapper fitting (converts oil tapper to 1/2" inlet).

640164

Tie-down kit for 16-gal / 120-lb containers.

71027-1

Tie-down kit for 55-gal / 400-lb containers.

DispensingAccessories621516-10

10' hose anddispensing bibb fordiaphragm pump.For use withdiaphragm pump.

635129

Dispensing bibb for use with diaphragm pump.

621523-10

10' hose with no-drip nozzle. For use withdiaphragm pump.

95189

Poly cam coupler 1/2" NPT (M)

95190

Aluminum cam coupler 1/2"NPT (M)

General Accessories640058-2

Dolly for 16-gal keg.

94421

Drum cover for 16-gal keg.

640165

Follower plate for 3"Thunder Series and120-lb container. Foruse with Thunder Seriesgrease.

640015-1

Follower plate for 3"Thunder Series and 400-lb container. For usewith Thunder Series grease.

640095-1-B

Follower plate for 2" Thunder Series and 35-lbcontainer. For use with Thunder Series grease.

640095-2-B

Follower plate for 3" Thunder Series and 35-lb container. For use with Thunder Series grease.

67145-1

Bung adapter for 2" ThunderSeries grease pump. For use with Thunder Series grease.

67145-2

Bung adapter for 3" ThunderSeries grease pump. For use with Thunder Series grease.

67145-3-B

Bung adapter for 2" Thunder Series oil pump. For use with Thunder Series oil.

67145-4-B

Bung adapter for 3" Thunder Series oil pump. For use with Thunder Series oil.

640153

Low level cutoff for 3" Thunder Series oil pump. For use with Thunder Series oil.

640095-2-B

640015-1

625123-10

621516-10

67145-X

67145-X-B

61601

Need

Copy

High-pressure HoseFitting Max

ID OD Threads Pressure Length

Model in in Both Ends psi (bar) ft (m)

BUNA-N TUBE, NEOPRENE COVER

1-WIRE BRAID

623501-2 1/2" 29/32" 1/2" NPT (M) 2,000 (138) 2 (0.6)

623501-5 1/2" 29/32" 1/2" NPT (M) 2,000 (138) 5 (1.5)

623501-6 1/2" 29/32" 1/2" NPT (M) 2,000 (138) 6 (1.8)

623501-8 1/2" 29/32" 1/2" NPT (M) 2,000 (138) 8 (2.4)

2-WIRE BRAID

624201-2 1/4" 11/16" 1/8" NPT (F) 5,000 (345) 2 (0.6)

624201-6 1/4" 11/16" 1/8" NPT (F) 5,000 (345) 6 (1.8)

624201-10 1/4" 11/16" 1/8" NPT (F) 5,000 (345) 10 (3)

624201-30 1/4" 11/16" 1/8" NPT (F) 5,000 (345) 30 (9.1)

624401-4 3/8" 27/32" 3/8" NPT (M) 4,000 (276) 4 (1.2)

624401-8 3/8" 27/32" 3/8" NPT (M) 4,000 (276) 8 (2.4)

624601-4 3/4" 1-1/4" 3/4" NPT (M) 2,250 (155) 4 (1.2)

ELASTOMER TUBE, POLYESTER COVER

1-WIRE BRAID

628067-3 1" 1-1/4" 1" NPT (M) 800 (55) 3 (0.9)

Low-pressure HoseFitting Max

ID OD Threads Pressure Length

Model in in Both Ends psi (bar) ft (m)

NEOPRENE TUBE, NEOPRENE COVER

2-FABRIC BRAID

622651-5 3/4" 1-3/16" 3/4" NPT (M) 600 (41) 5 (1.5)

622651-6 3/4" 1-3/16" 3/4" NPT (M) 600 (41) 6 (1.8)

622651-10 3/4" 1-3/16" 3/4" NPT (M) 600 (41) 10 (3)

622651-15 3/4" 1-3/16" 3/4" NPT (M) 600 (41) 15 (4.6)

BUNA-N TUBE, NEOPRENE COVER

2-FABRIC BRAID

622201-3 1/4" 5/8" 1/4" NPT (M) 250 (17) 3 (0.9)

622201-5 1/4" 5/8" 1/4" NPT (M) 250 (17) 5 (1.5)

622201-25 1/4" 5/8" 1/4" NPT (M) 250 (17) 25 (7.6)

In selecting a hose, be sure the hose material iscompatible with the fluid being pumped and thatthe maximum working pressure will not beexceeded in the application. Only those hose lengthoptions listed with each model are available.Substitute -XX with -5, -15, -25, etc., to indicatelength selection. (Example: Substitute -XX withlength selection, such as -50. If length is singledigit, use that digit only. Do not add zeros.)

*CAUTION: These hoses cannot be used with100:1 ratio pumps.

Never use a hose with a maximum pressure rating lower than the highest pressure the pumpcan generate.


4039

arozone.com

(800) 495-0276

Y28-1

66592

Inlet Max

Outlet Working

NPT Body Seat Pressure

Model in Material Material psi (bar)

BALL VALVES

Used to control the on-off flow of fluid material or air. Select proper working pressureand material compatibility for application.

61124 3/4" (F) Bronze Buna-N 200 (14)

66592 1/2" (F) Carbon steel Teflon 2,000 (138)

66593 3/8" NPS (M) x 3/8" (M) 303 stainless steel Teflon 4,000 (276)

PLUG VALVES

Y28-1 1/4" (F) Brass N/A 150 (10)

Y28-2 1/8" (F) Brass N/A 150 (10)

NEEDLE VALVES

636042 1/2" (F) Carbon steel Leather 8,000 (552)

636043 1/2" (M) x 1/2" (F) Carbon steel Leather 8,000 (552)

92818 1/4" (F) x 1/4" (M) Brass Leather 125 (9)

GLOBE VALVES

Y26-1 3/4" (F) Brass Graphite 125 (9)

BALL VALVES

104077-2 1/4" (F) Nickel-plated brass Teflon 225 (16)



Fluid Control Valves

Y43-214-N

FittingsThread Material

Size NPT of

Model in Construction

STRAIGHT COUPLINGS — 150 PSI (10 BAR) MAX

6,750 PSI (446 BAR) MAX

6 77617 3/8" (M) x 1/2" (M) Zinc-plated steel

5,000 PSI (345 BAR) MAX

76751 1/4" (M) x 11/16-16" (M) Steel

8,000 PSI (552 BAR) MAX

2722 1/8" (M) x 11/16-16" (M) Steel

73581 1/4" (M) x 3/8" (M) Steel

76493 1/8" (M) x 3/8" (M) Steel

REDUCING BUSHINGS — 150 PSI (10 BAR) MAX

Y45-5-C 1/4" (F) x 1/2" (M) Iron

Y45-9-C 1/2" (F) x 3/4" (M) Iron

3,000 PSI (207 BAR) MAX

Y45-102-C 1/8" (F) x 3/8" (M) Steel

Y45-105-C 1/4" (F) x 1/2" (M) Steel

Y45-106-C 3/8" (F) x 1/2" (M) Steel

Y45-109-C 1/2" (F) x 3/4" (M) Steel

10,000 PSI (690 BAR) MAX

6788 1/4" (F) x 1/2" (M) Steel

STREET ELBOWS — 150 PSI (10 BAR) MAX

Y43-1-C 1/8" (M) x 1/8" (F) Iron

Y43-2-C 1/4" (M) x 1/4" (F) Iron

Y43-4-C 1/2" (M) x 1/2" (F) Iron

Y43-5-C 3/4" (M) x 3/4" (F) Iron

Y43-6-C 1" (M) x 1" (F) plated Iron

77617 Y45-106-C Y43-2-C

Thread Material Max

Size NPT of Pressure

Model in Construction psi (bar)

STRAIGHT COUPLINGS — 150 PSI (10 BAR) MAX

6 Y43-44 1/2" (F) x 1/2" (F) Iron

Y43-48-C 1-1/2" (F) x 1-1/2" (F) Iron

REDUCING COUPLINGS — 8,000 PSI (552 BAR) MAX

4280 1/8" (F) x 3/8" (F) Steel

SHORT NIPPLES — 150 PSI (10 BAR) MAX

Y27-2-C 1/4" (M) x 1/4" (M) Plated iron




Y27-56-C 1" (M) x 1" (M) Plated iron

Y27-58-C 1-1/2" (M) x 1-1/2" (M) Plated iron

8,000 PSI (552 BAR) MAX

676 1/8" (M) x 1/8" (M) Steel

1950 1/4" (M) x 1/4" (M) Steel

70749 1/2" (M) x 1/2" (M) Steel

LONG NIPPLES — 150 PSI (10 BAR) MAX

LENGTH — 2” (51 MM)

Y44-11-C 1/4" Plated iron

LENGTH — 2-1/2” (63.5 MM)

Y44-12-C 1/4" Plated iron

ELBOWS — 150 PSI (10 BAR) MAX

Y43-12-C 1/4" (F) x 1/4" (F) Iron

Y43-15-C 3/4" (F) x 3/4" (F) Iron

3,000 PSI (207 BAR) MAX

Y43-214-N 1/2" (F) x 1/2" (F) Steel

Y43-215 3/4" (F) x 3/4" (F) Steel

4280

676

Y43-44


4241

arozone.com

(800) 495-0276

Fittings

Y43-233-C

Y17-10

Fluid CouplersModel Description

92021 Quick connect fluid coupler (female) — 3/4" NPT (F) coupleswith 92022 fluid connector

92022 Quick connect fluid connector (male) — 3/4" NPT (F) coupleswith 92021 fluid coupler

92021

92022

WARNING: To ensure safe operation, be sure the maximum working pressure of your fluid handling

system does not exceed the maximum working pressure of the fittings.

Inlet Outlet Max Working

Body Ball Seat NPT NPT Pressure

Model Material Material Material in in psi (bar)

65845 Carbon steel 440C 440 F 3/4" (M) 3/4" (M) 8,000 (552)Stainless Stainless

steel steel

66559 Carbon steel 440C 440 F 1" (M) 1" (F) 8,000 (552)Stainless Stainless

steel steel

Fluid Ball Check Unions

Thread Material Max

Size NPT of Pressure

Model in Construction psi (bar)

SWIVEL UNIONS

75364 1/4" (M) x 1/4" (F) Steel 10,000 (690)

75365 3/8" (M) x 3/8" (F) Steel 9,000 (621)

75366 1/2" (M) x 1/2" (F) Steel 6,750 (466)

75367 3/4" (M) x 3/4" (F) Steel 4,375 (302)

75368 1" (M) x 1" (F) Steel 3,550 (245)

75369 1/4" (F) x 1/4" (F) Steel 10,000 (690)

75370 3/8" (F) x 3/8" (F) Steel 9,000 (621)

PLAIN TEE — FEMALE

Y43-32-C 1/4" x 1/4" x 1/4" Iron 150 (10)

Y43-233-C 3/8" x 3/8" x 3/8" Steel 3,000 (207)

PIPE PLUGS – MALE

Y17-50 1/8" countersunk (hex) Steel 10,000 (690)

Y17-51 1/4" countersunk (hex) Steel 10,000 (690)

FEMALE ADAPTER

4280 3/8" (F) x 1/8" NPT (F) Steel 8,000 (552)

ADAPTER UNIONS

Y167-3 1/2" (F) x 3/8" NPT (M) Steel 6,000 (414)

Y167-4 3/4" (F) x 1/2" NPT (M) Steel 5,000 (345)

Y167-5 1/2" (F) x 1/4" NPT (M) Steel 6,000 (414)

4295 1/8" PTF SAE short (F) Steel 8,000 (552)x 7/16-27" (M)

4616 1/2" (F) x 1-3/8"-18 (M) Steel 8,000 (552)

6847 3/8" (F) x 0.523"-27 (M) Steel 8,000 (552)

65845

Used to prevent backflow of material.

75364

Filters, Regulators, and Lubricators

Filters, Regulators, LubricatorsYour Ingersoll Rand air tools will last longer and have fewer problems and repair costs when you use the high-quality filters, regulators, and lubricators specially made to match your tool.

Filters

Ingersoll Rand compressed air filters are designed toremove airborne solid and liquid contaminants that canplug small orifices and affect performance, or causeexcessive wear and premature equipment failure. Severaltypes of filters are offered, including models withcoalescing elements for removal of oil aerosols andparticles down to 0.3 micron.

Regulators

Ingersoll Rand air line regulators provide controlled,consistent air pressure as required for specific airequipment connected to the air system. They aredesigned to deliver the pressure you need, with precisecontrol over outlet pressure. They help maintain relativetorque and speed control, and also conserve compressed air.

Lubricators

Ingersoll Rand fog-type lubricators help ensure that airequipment receives the required lubrication to maintainoptimum performance, reduce wear, and extend life. Theyare designed to provide the correct amount of oil, with aconstant ratio to CFM. Precise oil feed adjustment allowsthe proper oil delivery rate. Lubricators should beinstalled close to the downstream application to ensureeffective distribution oil to the equipment.

Point-of-purchase display packaging

Some of our filters, regulators, and lubricators up to1/2" NPT are packaged in clamshell-style packagingfor easy, flexible display options and effective, self-selling graphics and copy

Combination Units with GaugeSize Filter-Regulator- PackagingNPT (F) Lubricator Typein

1/4" mini C121-820 Clamshell

1/4" C221-810 Clamshell



3/4" C28453-810

1" C28463-810

1-1/4" C28473-810

1-1/2" C28483-810

Individual UnitsSpecifications Filter Regulator Lubricator

1/8" NPT (F) MINI

Catalog Number F111-420 R111-600 L111-120

Flow Rate — scfm 345 13 190

Adjustable Pressure Range — psig N/A 5 – 125 N/A

Bowl Size — oz 1.1 N/A 1.1

Bowl Type Composite nylon N/A Composite nylon

Weight — lb 1.48 1.38 1.5

Packaging Type Clamshell Clamshell Clamshell

1/4" NPT (F) MINI




Bowl Size — oz 1.1 N/A 1.1

Bowl Type Composite nylon N/A Composite nylon

Weight — lb 1.46 1.34 1.5


1/4" NPT (F)




Bowl Size — oz 6 N/A 6

Bowl Type Metal N/A Metal

Weight — lb 1.48 1.38 1.5


3/8" NPT (F)




Bowl Size — oz 6 N/A 6


Weight — lb 1.46 1.34 1.44


1/2" NPT (F)




Bowl Capacity — oz 6 N/A 6


Weight — lb 1.43 1.3 1.36



4443

arozone.com

(800) 495-0276

Specifications Filter Regulator Lubricator

3/4" NPT (F)




Bowl Capacity — oz 2.87 N/A 6.11

Height — in 8.4" 5.9" 9.36"

Width — in 2.9" 2.9" 2.39"

Specifications Filter Regulator Lubricator

1" NPT (F) (METAL BOWLS)




Bowl Capacity — oz 8 N/A 19

Height — in 11.46" 7.83" 10.67"

Width — in 3.94" 3.94" 3.94"

Combination Over/UnderFilters-Regulators

1/8” NPT (F) 1/4” NPT (F)Specifications Mini Mini

Catalog Number P114-620 P124-620

Flow Rate — scfm 13 13

Adjustable Pressure Range — psig 5 – 125 5 – 125

Bowl Size — oz _ _

Bowl Type Composite Composite

Weight — lb 2.05 2.03

Packaging Type Clamshell Clamshell

1/4" 3/8" 1/2" Specifications NPT (F) NPT (F) NPT (F)

Catalog Number P224-610 P234-610 P244-610


Adjustable Pressure Range — psig 5 – 125 5 – 125 5 – 125

Bowl Capacity — oz 6 6 6

Bowl Type Metal Metal Metal

Weight — lb 2.05 2.03 2.00


In-line Series Filters-RegulatorsSpecifications Filter Lubricator

1/4" NPT (F)

Catalog Number F25451-110 L26451-110

Flow Rate — scfm 168 200

Adjustable Pressure Range — psig N/A N/A

Bowl Capacity — oz 2.87 6.11

Height — in 8.4" 9.36"

Width — in 2.9" 2.39"

Catalog Number N/A L01-03-000

Flow Rate — scfm N/A 22

Bowl Capacity — oz N/A 0.25

Height — in N/A 3"

Width — in N/A 1-1/8" hex

Air Line Filter, Regulators, and LubricatorsFilter Sump Filter Max Inlet

Inlet Capacity Element Flow Pressure

Model NPT (F) Bowl oz (mL) microns scfm psi (bar)

MODULE / AIR 1000

FILTER

F25121-200 1/4" Polycarbonate 0.6 (18) 20 12 200 (14)

REGULATOR (29850 GAUGE NOT INCLUDED. SEE PG. 34) PRESSURE RANGE OF REGULATOR: 5-125 PSI

R27121-100 1/4" N/A N/A N/A 13 250 (17)R

LUBRICATOR

L26121-100 1/4" Polycarbonate 1.1 (33) N/A 60 200 (14)

PIGGY-BACK FILTER-REGULATOR (GAUGE NOT INCLUDED. SEE PG. 34)

P29122-100 1/4" Polycarbonate 1.1 (33) 20 12 200 (14)with auto drain

FILTER-REGULATOR-LUBRICATOR (INCLUDES GAUGE)

C28121-800 1/4" Polycarbonate 1.1 (33) 20 13 200 (14)

Filter Sump Filter Max. Inlet

Inlet Capacity Element Flow Pressure

Model NPT (F) Bowl oz (mL) microns scfm psi (bar)

MODULE / AIR 2000 (ALL BOWLS INCLUDE SIGHT GAUGES)

FILTER

F25221-110 1/4" Metal 6 (177) 40 54 175 (12)

F25241-110 1/2" Metal 6 (177) 40 122 175 (12)

F25231-110 3/8" Metal 6 (177) 40 100 175 (12)

REGULATOR (INCLUDES GAUGE) PRESSURE RANGE OF REGULATOR: 5-125 PSI

R27221-600 1/4" N/A N/A N/A 100 200 (14)

R27241-600 1/2" N/A N/A N/A 150 200 (14)

R27231-600 3/8" N/A N/A N/A 130 –

LUBRICATOR

L26221-110 1/4" Metal 6 (177) N/A 75 175 (12)

L26241-110 1/2" Metal 6 (177) N/A 110 175 (12)

PIGGY-BACK FILTER-REGULATOR (INCLUDES GAUGE) REGULATOR RANGE: 5-125 PSI

P29221-610 1/4" Metal 6 (177) 40 93 200 (14)

P29241-610 1/2" Metal 6 (177) 40 140 200 (14)

FILTER-REGULATOR-LUBRICATOR (INCLUDES GAUGE AND MOUNTING BRACKET)REGULATOR RANGE: 5-125 PSI

C28221-810 1/4" Metal 6 (177) 40 N/A 175 (12)

C28231-810 3/8" Metal 6 (177) 40 N/A 175 (12)

C28241-810 1/2" Metal 6 (177) 40 N/A 175 (12)

A whole new way to run an air lineIngersoll Rand / ARO Module / Air

• Each unit has threaded ports and can be used with standard pipe nipples

• Totally modular design permits removal of unit from line without disturbing hard piping, also speedsup regular or unscheduled maintenance

• Modular spacers have retained O-rings and fasteners to prevent loss during routine maintenance

• Push-pull regulator knob allows easy, one-hand adjustment

• Safety lock-out valve provides protection from unexpected start-ups

• Modular end pipe adapters fit 1/4", 3/8", 1/2", and 3/4" pipe sizes.

• High-tech modern appearance enhances any service area; black powdercoat finish provides long-lasting protection against weather and hard use

P29122-100

L26121-100F25121-200

C28121-800

L26221-110

P29221-610

R27121-100

R27221-600

F25221-110

Limited selection shown — for more informationon the entire line of Ingersoll Rand / ARO filters,regulators, and lubricators, please refer to form9340-R.


4645

arozone.com

(800) 495-0276

Air Line Filter, Regulators, and LubricatorsInlet Filter Max Inlet

NPT (F) Capacity Element Flow Pressure

Model in Bowl oz (mL) microns scfm psi (bar)

HEAVY-DUTY

FILTER

25341-020 1/2" Polycarbonate 10 (295) 40 82 200 (14)with guard


25361-020 1" Polycarbonate 10 (295) 40 88 200 (14)with guard

REGULATOR (100067 GAUGE NOT INCLUDED. SEE BELOW)

PRESSURE RANGE OF REGULATOR: 0 – 125 PSI

27344-000 1/2" N/A N/A N/A 256 250 (17)

27354-000 3/4" N/A N/A N/A 287 250 (17)

27364-000 1" N/A N/A N/A 293 250 (17)

LUBRICATOR



26361-020 1" Polycarbonate 10 (295) 40 75 200 (14)with guard

FILTER-REGULATOR-LUBRICATOR (INCLUDES GAUGE)

PRESSURE RANGE OF REGULATOR: 5 – 125 PSI

28343 1/2" Polycarbonate 10 (295) 40 65 200 (14)with guard

28353 3/4" Polycarbonate 10 (295) 40 75 200 (14)with guard

28363 1" Polycarbonate 10 (295) 40 75 200 (14)with guard

Air Regulator GaugesPressure Thread For

Lens Range NPT Use

Model Description Material psi (bar) in With

GAUGES

29850 Regulator gauge Polycarbonate 0 – 160 (0 – 11) 1/8" Module Air 1000

100067 Regulator gauge Polycarbonate 0 – 160 (0 – 11) 1/4" Module Air 2000and Heavy-duty

Mounting HardwareModel Description For Use With

BRACKET AND PANEL NUTS

29077 Wall-mounting bracket Heavy-duty

29623 Wall-mounting bracket Module Air 2000

104173 Panel nut Module Air 2000

29668 Wall-mounting bracket Module Air 1000

104094 Panel nut Module Air 1000

25341-020

27344-000

28353

Limited selection shown — for moreinformation on the entire line of IngersollRand / ARO filters, regulators, andlubricators, please refer to form 9340-R.

Regulator shown with optional 100067 gauge.

26341-020

29850

Self-evacuating Waste Oil Caddies

The fast and affordable way to transfer usedoil to any bulk storage tank using compressedair. Ingersoll Rand self-evacuating waste oilcaddies eliminate the need for waste oilpumps. Pressurized draining reducesdowntime and increases productivity.


• Compatible with most existing shop air systems, unlike many other caddies that require restricted psi

• Offers increased mobility with casters on all corners, two locking

• Increases productivity levels — less time waiting for draining and more time in the bay

• Comes standard with regulator, gauge, and either a 6' hose with nozzle or a 3/4" cam coupler

• Minimizes spills with an automatic ball check valve in the downtube

Self-evacuating WasteOil Caddy

Large funnel for

simple draining

(67384)

Cam lock

(67384)

Adjustable height

Air fitting with

pressure relief

valve

ASME certified tank

Large casters


4847

arozone.com

(800) 495-0276

Waste Oil and Fresh Oil Caddy Systems

67384

The 67384, similar to 62131, allowsshop air to be connected to thedrain for fast and reliable operation.The model includes an automaticcheck ball, padded handle, and 3/4"high flow cam coupler outlet. The67384 contains a larger funnel.

612999-24

Our fresh oil caddy provides a cost-effective portableoption to expensive oil systems. The fresh oil caddyprovides a great way to reduce costs and increaseproductivity. The system is ideal for specialized fluidssuch as 5W-20 synthetic motor oils.

Fresh Oil CaddyBuilt tough to fit the way you work

The 24-gal Ingersoll Rand fresh oil caddy system provides a cost-effective solution fordispensing synthetic oil. These caddies are easy to use and require minimal maintenance.The fresh oil caddy system eliminates the need to add costly bulk storage tanks for oils andfluids. Specialized fluids, such as 5W-20 synthetic motor oils, can now be stored in the freshoil caddy system and wheeled to the vehicle to be dispensed.


Increases productivity by increasing mobility

Uses a 3:1 piston pump with air filter-regulator and gauge

Dispenses fluids through a 6' long 1/2" diameter hose

Includes a digital dispensing meter (totalizing)

Improves mobility around the shop with 6" front casters

Fluid Max. Working Free Flow Rate Operating

Capacity Air Inlet Outlet Flow Rate Gal. / Min. Air Pressure

Model gal (L) in (mm) in (mm) gpm (L/min) gal (L/min) psi (bar)

FRESH OIL CADDY

612999-24 24 (91) 1/2" (13) 1/2" (13) 6 (23) 9 (34) 40 – 100 (3 – 7)

Waste Oil Caddies3:1 pump

with in-lineregulator

Flexible non-dripnozzle

24-gal tank

Large casters

Digital controlhandle

Max Inlet Tank Height FunnelModel Pressure Capacity Range Fluid Air Inlet Size

psi (bar) gal (L) m Outlet in (mm) in (mm)

WASTE OIL CADDIES

62131 150 (10) 21 (80) 49 – 70 (1.3 – 1.8) 6' hose with nozzle 1/4" (6) 16" (406)

67384 150 (10) 21 (80) 49 – 70 (1.3 – 1.8) 3/4" cam coupler 1/4" (6) 20" (508)

Model Type Description For Use With

621603-6 Connection kit Includes 6' waste oil hose with female 3/4" coupler 67384and air supply line

96268 Transmission funnel 22" x 35" funnel fits standard 61231 and 61235 funnels 62131

96548 Transmission funnel 24" x 35" transmission funnel fits standard 67384 units 67384

96269 Tool tray Polypropylene tool tray holds tools, filters, funnels, etc. 62131, 61235,connects to down tube and handle 67384

Accessories

62131

This self-evacuating oil drain can be connectedto shop air up to a recommended 70 psi, unlikemost drains that are restricted to 10 – 20 psi. At60 psi, the oil drain can be evacuated in undertwo minutes. The 62131 comes with casters onall corners (two locking), regulator, gauge, 5'output hose, and utilizes an automatic checkball in the down tube.


49 50

Oil Drains and Accessories

615019-1

A professional oil drain that adjusts between 41and 69 inches high, and includes a smooth-rollingdolly for easy and safe movement. A convenientdipstick is provided to measure contents level. This model includes the drum with a drain valve.

640058-2

Dolly for 16-gal keg.

615014

16-gal drum with shut-off valve.

615028

This oil drain has a low-profile design for usein fleet service centers. The pan is baffled to prevent spills during movement. This drainincludes a heavy-duty top screen to keeptools and parts out of the drain, apump adapter for easyconnection to an evacuationpump, and a durable finishto prevent corrosion.

61580 640058-2

Height Range CapacityModel Description in gal Includes

OIL DRAINS

615003- B 16-gal oil drain kit 39" – 67" 16 Funnel, screen, drum cover, dipstick

615019-1 16-gal oil drain 41" – 69" 16 Dolly, funnel, screen, drum, drum cover, dipstick, drain

615028 Low-profile oil drain 10" 20 Dolly, funnel, screen, drum, drum cover, dipstick, drain

arozone.com

(800) 495-0276

Bulk Fluid Management

Whether it’s bulk tanks or portable dispensingunits, Ingersoll Rand offers durable andreliable products for clean and wastefluid transfer applications that requirebulk storage. Our double-walledunits, flexible anchoring options, spillcontainment features, and over-spillprotection devices maximize safety.And, our standard one-year warranty on systems and five-year warranty onIngersoll Rand / ARO pumps provide added peace of mind.

For more information about Ingersoll Randfluid solutions, please call us at(866) NSP-SERV.

Tanks for your business

Ingersoll Rand offers a variety of bulk managementservices to keep your customers’ fluid products flowingsmoothly.

Product consultation

System design and manufacturing

Installation

Permit filing

Project management

On-site troubleshooting

Preventive maintenance

System leasing


51 52

Model Category

BULK OIL TANKS

615-180BTD Bulk tanks, 180-gal

612999-180 Bulk tanks, 180-gal





Lube Equipment and Accessories

0

4

8

12

16GALLONS GALLONS

0

4

8

12

16GALLONS0

4

8

12

16GALLONS GALLONS

0

4

8

12

16GALLONS

275-gal Bulk Oil TankItem Quantity Part Number Description

1 1 622201-5 Hose assembly

2 1 P224-610 Air regulator

3 1 LM2203A-11-C Pump



6 2 66592 1/4" turn valve

7 2 7UM4050-SR Hose reel assembly

8 3 75366 Adapter fittings

9 2 635360-2 Metered flow guns

10 1 640153 Low-level cut-off

6

7

8

9

5

43

2

1

10

Suppy by vender

arozone.com

(800) 495-0276

Bulk Oil TanksIngersoll Rand offers both horizontal and vertically configureddouble-walled tanks designed to meet all your bulk storage needs.Flexible anchoring options, spill containment features, and over-spill protection devices are just some of the many options thatprotect your workspace and the environment. And, our standardone-year warranty on systems and five-year warranty on AROpumps provide added piece-of-mind.


Features double-walled design for greater environmentalprotection

Pumps bulk fluids quickly and efficiently using high qualityARO pumps

Totalizes fluids with an accurate digital meter

Dispenses fluids into containers through an optional dispensingbar and spigot

Offers fewer moving parts leading to less pump wear and toreduced maintenance costs

Width MaxLength Diameter Height Tank Size Flow Rate

Model in in in gal Pump GPM

BULK OIL TANKS

612999-180 N/A 36 45 180 LM2203A-11-C 6

612999-250 N/A 36 60 250 LM2203A-11-C 6

612999-300 N/A 36 72 300 LM2305A-11-B 6

615-180BTD 72 26 38 180 PD05P-AAS-PGG or 666100-362-C 13 or 35

615-250BTD 72 34 38 250 PD05P-AAS-PGG 13

615-300BTD 72 40 38 300 PD05P-AAS-PGG 13

Bulk Oil Tanks


53 54

120-lb Drum Pump / Reel Assembly

Item Quantity Part Number Description

1 1 LM2250E-31-B Pump unit

2 1 Y43-233C T union


4 1 636042 1/4" turn valve

5 1 7UH3025-SR Hose reel assembly


7 1 636088 Z-swivel

8 1 636111 Grease control handles

9 1 640165 Drum follower plate

10 1 94421 Drum cover


12 1 75364 Adapter fitting


9

10

11

12

131

3

2

4

5

8

7

6

55-gal Grease / ReelItem Quantity Part Number Description

1 1 LM2350E-41-B Pump unit



4 2 636042 1/4" turn valve

5 2 7UH3050-SR Hose reel assembly

6 2 636088 Z-swivel

7 2 636111 Grease control handles


9 1 640015-1 Follower assembly

10 1 94422 Drum assembly




1

2

3

45

8

6

7

9

10

11

12

13

0

4

8

12

16GALLONS

55-gal Pump / ReelItem Quantity Part Number Description

1 1 61601 55-gal drum kit

2 1 Y27-55-C Adapter fitting

3 1 LM2203A-11-C Pump

4 1 61113 Pump mounting bracket


6 1 622201-3 Air hose


8 1 66592 1/4" turn valve


10 1 7UM4050-SR Hose reel assembly

11 1 635360-2 Metered flow control


8

109

11

12

1

23

4

5

6

7

arozone.com

(800) 495-0276


55 56

United States

Fluid Technical CenterPO Box 151One ARO CenterBryan, OH 43506-0151Telephone: (419) 636-4242Fax: (419) 633-1674

Distribution Center510 Hester DriveWhite House, TN 37188Telephone: (615) 672-0321Fax: (615) 672-7679

Marketing/Sales HeadquartersIngersoll Rand Productivity Solutions1467 Route 31 SouthAnnandale, NJ 08801

Canada

Marketing, Sales, Parts& Distribution CentreIngersoll Rand Canada Inc. 51 Worcester RoadToronto, Ontario M9W 4K2Telephone: (416) 213-4500Fax: (416) 213-4510

Customer ServiceToll Free Tel: (877) 999-9073Toll Free Fax: (888) 422-2258Local Fax: (416) 213-4506

Latin America

Marketing/Sales/Service HeadquartersIngersoll Rand Company730 N.W. 107th AvenueSuite 300Miami, FL 33172-3107USATelephone: (305) 559-0500Fax: (305) 222-0864

BrasilIngersoll-Rand do Brasil Ltda.Tool & Hoist DivisionAv. Dr. Cardoso de Melo, 1855cj. 152-04548-005 Sao Paulo, SPBrasilTelephone: (55) 11 3049-8900Fax: (55) 11 3846-4985

ChileIngersoll Rand ChileNueva Tajamar 555, 15th fl.Las Condes, SantiagoChileTelephone: (56) 2 339-7939Fax: (56) 2 339-7940

MexicoIngersoll Rand de Mexico S.A. de C.V.Tool & Hoist DivisionBlvd. Centro Industrial #11Fracc. Industrial Puente de Vigas 54090 Tlanepantla, Edo. de MexicoMexicoTelephone: (52) 5 565-3061Fax: (52) 5 565-3072

Europe/Middle East/Africa

Tool & Hoist Division Headquartersand European Customer Care CentreIngersoll Rand Zone du Chêne SorcierBP 6278346 Les Clayes sous Bois CedexFranceTelephone: +33 (0) 1 30 07 68 00Fax: +33 (0) 1 30 07 69 80

United KingdomIngersoll Rand Distribution CentreSwan LaneHindley GreenWiganLancashire WN2 4EZEnglandTelephone: +44 (0) 1942 257131Fax: +44 (0) 1942 526255

Asia/Pacific

Marketing/Sales/Service HeadquartersIngersoll Rand Asia Pacific Ltd.23/F., 625 King’s Road North PointHong KongTelephone: (852) 2527-0183Fax: (852) 2529-5976

AustraliaIngersoll Rand Australia Ltd.1 Hartnett DriveSeaford, Victoria 3198AustraliaTelephone: (61) 3 9554 1600Fax: (61) 3 9554 1611

IndiaIngersoll Rand Wadco Tools Ltd.37-A, Site 4Sahibabad Industrial AreaGhaziabad 201 010 (UP)IndiaTelephone: (91) 0120-4771-001 /2/3/4Fax: (91) 0120-4771-005

For additional specific information on Ingersoll-Rand locations in Europe and Asia, visitour website at: www.irtools.com.

Contact Information

Disclaimer: Nothing contained within this brochure is

intended to extend any warranty or representation,

expressed or implied, regarding the products described

herein. Any such warranties or other terms or conditions

of the sale of products shall be in accordance with

Ingersoll Rand Standard Terms and Conditions of Sale

for such products which are available upon request.

Product improvement is a continuing goal at Ingersoll-

Rand. Designs and specifications are subject to change

without notice or obligation.

*The Ingersoll Rand corporate identities are changing.

While most photography reflects previous symbols and

logos, you will soon see our new look.

fluids.ingersollrand.com

Warranty: Air Systems ComponentsLubrication Equipment

Air Systems ComponentsWarrantyIngersoll Rand Fluid Products warrants to the original-usepurchaser of the Ingersoll Rand / ARO air systemscomponents depicted in this catalog that Ingersoll Rand willrepair or replace, free of charges, including return shippingcosts within the continental United States of America, anysuch product that under normal use and service provesdefective in material or workmanship, as determined byIngersoll Rand inspection, five years from date of purchase,provided the claimed defective product, or part thereof, ispromptly returned to the Ingersoll Rand Service RepairCenter or a factory-authorized service repair center, withtransportation charges prepaid.

If Ingersoll Rand inspection discloses no defect in materialor workmanship, repair or replacement and return will bemade at customary charges.

The foregoing warranty supersedes, voids, and is in lieu of all or any other warranties, expressed or implied, and no warranty of merchantability or fitness for particularpurpose is intended or made. The sole obligation ofIngersoll Rand and the sole remedy of the original-usepurchaser is as stated above and in no event shall Ingersoll Rand be liable for any special, direct, indirect,incidental, consequential; or other damages or expenses ofany nature including, without limitation, loss of profits orproduction time incurred by the original-use purchaser orany other party.

Lubrication Equipment WarrantyIngersoll Rand warrants to the original-use purchaser of theproducts depicted in this catalog that Ingersoll Rand willrepair or replace, free of charges, including return shippingcosts within the continental United States of America, anysuch product that under normal use and service provesdefective in material and workmanship, as determined byIngersoll Rand inspection, within (A) one year from date ofpurchase of said products, other than the following, (B) fiveyears from date of purchase of LM and LP Series pumps,(C) five years from date of purchase of a diaphragm pump,and (D) five years from date of purchase of Ingersoll Rand/ ARO-manufactured swivels, non-metered control handles,4-1/4", 6", 8" pumps, drains, follower plates, tie-downs,siphon tubes, and drum covers, provided the claimeddefective product, or part thereof, is promptly returned tothe Ingersoll Rand factory or Customer Service Center withtransportation charges prepaid.

This warranty does not cover failure of parts or componentsdue to normal wear or damage, or wear that in thejudgement of Ingersoll Rand / ARO arises from misuse,abrasion, corrosion, negligence, accident, substitution ofnon-Ingersoll Rand / ARO parts, faulty installation, ortampering.

If Ingersoll Rand inspection discloses no defect in materialor workmanship, repair or replacement and return will bemade at customary charges.

Equipment not covered by Ingersoll Rand warranty:accessories or components of equipment sold by IngersollRand that are not manufactured by Ingersoll Rand (such asswitches, hoses, meters, etc.) are subject to the warranty, ifany, of their manufacturer. Ingersoll Rand will provide thepurchaser with reasonable assistance in making such claims.

The foregoing warranty supersedes, voids, and is in lieu of all or any other warranties, expressed or implied, and no warranty of merchantability or fitness for particularpurpose is intended or made. The sole obligation ofIngersoll Rand and the sole remedy of the original-usepurchaser is as stated above and in no event shall Ingersoll Rand be liable for any special, direct, indirect,incidental, consequential, or other damages or expenses of any nature including, without limitation, loss of profitsor production time incurred by the original-use purchaseror any other party.

TBD

arozone.com

(800) 495-0276


© 2007 Ingersoll-Rand Company IND-0706-011

Ingersoll Rand Industrial Technologies provides products, services and solutions that

enhance our customers’ energy efficiency, productivity and operations. Our diverse

and innovative products range from complete compressed air systems, tools and

pumps to material and fluid handling systems and environmentally friendly

microturbines. We also enhance productivity through solutions created by Club Car®,

the global leader in golf and utility vehicles for businesses and individuals.

arozone.com

(800) 495-0276

Distributed by:


Ingersoll Rand ARO - Process Controls And … · 2 2 Contents 1 Lubrication Equipment Warranty...

Documents

Transcript of Ingersoll Rand ARO - Process Controls And … · 2 2 Contents 1 Lubrication Equipment Warranty...