Infrastructure as constructed Data Standard

ADAC_ProjectASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONDETAILDESCRIPTIONADACThe ADAC element is the root element of an ADAC XML. It constrains all enclosed elements as follows. There can be no other element in the root level of the document.ProjectThe Project element encloses all data that is common to the whole project.Presently, for technical simplicity, only a single project may exist within an instance document, but in future it may be feasible for multiple independant projects to be delivered in a single instance.Export Date TimeExport date and time in UTC. Format is yyyy-mm-ddThh:mm:ssZ (eg 2006-08-08T20:00:00Z)NameThe project or development name.OwnerAre assets for the whole project owned by Council or another entity.ReceiverThe receiver of the ADAC fileWorks Approval IDThe works approval ID for the development that this information represents.Drawing NumberThe Council drawing number of the as constructed plans. This may not be known at the time of compilation.Drawing RevisionDate the drawing was revisedConstruction DateThe accepted date of construction for the whole project. Usually the project completion date.Date may be used to calculate remaining life in an asset management system.Coordinate SystemRecords the particulars of the horizontal and vertical coordinate systems for the whole project.Horizontal Coordinate SystemSpecifies the horizontal coordinate system used. e.g. MGA56. Well known projections may be referred to by name only. All spatial information in the project will be considered to be referenced to this system. If custom local plane systems or projections are used by agreement with the receiver, then any parameters should be specified in the notes.Horizontal DatumTo Specifiy the Datum that the Horizontal Coordinate System is based on. E.g. GDA94.Vertical DatumTo Specifiy the Datum of Height values. E.g. AHD.Is ApproximateAre the values supplied accurate or approximations. If data is plane rectangular approximating MGA-56 then set to trueOrigin MarkWhen data is plane rectangular this is the Permanent Survey Mark used as the origin.NotesTo contain any additional data required to specify the coordinate systemDrawing ExtentsThe rectangular coordinate envelope enclosing the project areaSouth WestThe coordinates of the southwest corner.North EastThe coordinates of the northeast corner.DescriptionDescriptive text summarising the project.StatusThe status of the ADAC information at the time of export.SoftwareDetails of the software product used to create the ADAC data set.Software developers may choose to add this information programmatically via their product.ProductThe name of the software product.VersionThe version or release number of the product.SurveyorStructure containing information from the certifying surveyor.Surveyor NameThe name of the surveyor.Date Final SurveyThe date of the final survey.Date ApprovedThe date of the final approval.EngineerStructure containing information from the certifying engineer.Engineer NameThe name of the consulting engineerDate ApprovedThe date of approval.Project DataSewerageThe Sewerage element encloses all sewerage (waste water) feature descriptions.TransportThe Roads element encloses all roads feature descriptions.Water SupplyThe Water element encloses all water supply feature descriptions.Storm WaterThe StormWater element encloses all stormwater feature descriptions.Open SpaceThe OpenSpace element encloses all public open space feature descriptions.CadastreThe Cadastre element encloses all cadastral feature descriptions.SurfaceThe Surface element encloses Supplementary surface feature descriptions.EnhancementsThe Enhancements element encloses enhacements such as annotations and dimensions.SupplementaryThe Supplementary element encloses all feature data not described specifically in the schema. It is recommended to keep the use of unstructured data to a bare minimum.VersionFixed Value = 4.0.0The version attribute marks the version of the instance document. Only a value of 4.0.0 will validate against this schema.

&C&A&C&F&RPage &P

ADAC SewerageASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONDETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONSewerageData structure constraining information relating to sewerage (waste water) features.ManholesElement representing the feature class of Sewerage ManholesManholeElement representing a sewerage manhole (maintenance hole) or pit feature.UseUse or purpose of this pitOverflowOverflow Maintenance HoleBlank EndBlank EndP.S.Pit housing a sewer pump stationValve PitAccess Pit for a Sewer ValveGrit Collector MHGrit Collector Maintenance HoleOutletOutletRising Main Discharge MHRising Main Discharge Maintenance HoleVacuum Sewerage Pump StationVacuum Sewerage Pump StationVacuum Sewerage MHVacuum Sewer Maintenance HoleVacuum LiftVacuum LiftStorage TankStorage TankMaintenance HoleMaintenance HoleDefault ValueChamber SizeData structure describing the chamber configuration and dimensions.RectangularData container for rectangular dimensionsCircularData container for circular dimensionsCustomCustom Shaped chamber. Such a feature should be associated with a plan or document describing its layout and dimensionsSurface Level_mThe height of the top surface of the lid, hatch, rim or roof. Surface level in meters against the vertical datum for this project.floatInvert Level_mThe height of the top surface of interior floor/bottom. Invert level in meters against the vertical datum for this project.floatChamber ConstructionMethod of chamber construction.PrefabricatedPrefabricatedInsituBuilt or poured in-situMaterial TypeMaterial type for chamber constructionConcreteConcretePVCPoly Vinyl ChloridePEPolyethyleneLiningMaterial type of chamber liningPlasticPlasticEpoxyEpoxyPolyureaPolyureaPEPolyethyleneLid TypeChamber lid configuration and materialCast IronCast IronDefault ValueAluminiumAluminiumCI Conc InfillCast Iron with Concrete InfillConcreteConcreteDrop TypeChamber drop type - based on WSAA standard typesStraight Through MHWSAA - Straight through Maintenance HoleChange In Direction Through MHWSAA - Change in Direction through Maintenance HoleExternal DropWSAA - External Drop type Maintenance HoleAlternative External DropWSAA - Alternative External Drop type Maintenance HoleInternal DropWSAA - Internal Drop type Maintenance HoleOblique 45deg BackdropWSAA - Oblique 45 Backdrop type Maintenance HoleCatchment PSThe identifier of the pumpstation that this node flows to.String_32Line NumberThe identifier of the line that this node connects toString_32MH NumberThe identifier of this manhole or pit.String_32Chainage_mThe distance upstream from end of line.Float_Positive_NonZeroTie Distance_mThe tie distance in meters to a cadastral cornerFloat_Positive_NonZeroOffset Distance_mThe offset distance in meters from a cadastral boundaryFloat_Positive_NonZeroRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointPipes Non-PressureElement representing the feature class of Sewerage Pipes Non-PressurePipe Non-PressureElement representing a sewer pipe non-pressurised. Includes all gravity reticulation and trunk gravity mains.Line NumberThe sewer line identifierString_32UseThe function of this pipe in the network.Conduit PipeConduit Pipe (enveloper)DisusedDisused Non Pressure PipeEffluentTreated Wastewater PipeOverflowDirects excessive wastewater to another locationReuseTreated Wastewater Reuse PipeStubStub PipeTrunkTrunk SewerVentVentilation MainSyphonSyphon MainVacuumVacuum MainReticulationReticulation SewerDefault ValueDiameter_mmNominal pipe diameter in millimetres.Float_Positive_NonZeroMaterialPipe materialUPVCUnplasticised Poly-Vinyl ChlorideDefault ValueABSAcrylonitrile Butadiene StyreneCast IronCast IronConcreteConcreteDICLDuctile Iron Concrete LinedFRCFibre Reinforced ConcreteGRPGlass Reinforced Pipe (includes Hobas)MSCLMild Steel Concrete LinedOPVCOriented Poly-Vinyl ChloridePEPolyethyleneRCPReinforced Concrete PipeSWPPStructural Wall Polypropylene PipeBCBox CulvertHDPEHigh Density Poly-Ethylene(includes Haries Black Brute)PVCPoly-Vinyl ChlorideVC-HVC HepworthVC-NVC NaylorVCVitrified ClayMDPEMedium Density Poly-EthyleneClassThe pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.SN8 (SEH)Class Sewer Extra Heavy (Now SN8)Default Value4Class 46Class 69Class 912Class 1216Class 1618Class 1820Class 20K9Class K9K12Class K12PN6.3PN6.3PN8PN8PN10PN10PN12.5PN12.5SN4 (SH)Class Sewer Heavy (Now SN4)SN5000SN5000SN8000SN8000SN10000SN10000XClass XYClass YZClass ZProtectionThe protective material enveloping the pipe.FBEFusion Bonded EpoxySintakoteSintakoteWrappedPlastic WrappedEncasedEncasedSheathedSheathedDimensions Invert Levels_mCalls in the standard elements for upstream and downstream invert levelsUS_InvertLevel_mInvert level in metres AHD of this pipe end.FloatDS_InvertLevel_mInvert level in metres AHD of this pipe end.FloatDimensions Surface Levels_mCalls in the standard elements for upstream and downstream surface levelsUS_SurfaceLevel_mSurface level in metres AHD vertically above this pipe end.FloatDS_SurfaceLevel_mSurface level in metres AHD vertically above this pipe end.FloatAlignment_mAverage offset distance in metres from casdastral boundary to the main.Float_Positive_NonZeroAverage Depth_mNominal depth in metres to the top of the pipe.FloatEmbedmentEmbedment type from WSAA Sewerage Codes.Type 1WSAA Sewerage embedment type 1Type 2WSAA Sewerage embedment type 2Type 3WSAA Sewerage embedment type 3Type 4WSAA Sewerage embedment type 4Type 5WSAA Sewerage embedment type 5Type 6WSAA Sewerage embedment type 6Type 7WSAA Sewerage embedment type 7Type 8WSAA Sewerage embedment type 8Type 9WSAA Sewerage embedment type 9Type 10WSAA Sewerage embedment type 10Type 11WSAA Sewerage embedment type 11Type 12WSAA Sewerage embedment type 12Type 13WSAA Sewerage embedment type 13Joint TypePipe to pipe join method.Rubber RingRubber RingDefault ValueSolvent WeldSolvent WeldElectrofusion WeldElectrofusion WeldRock ExcavatedValue indicating whether rock was excavated from the pipe channel.booleanPipe GradePipe grade as a percentage. Derivable as the difference in invert levels divided by the horizontal length (not the length of pipe) multiplied by 100.Float_Positive_NonZeroPipe Length_mActual material length of the pipe. Not the horizontal length of the geometry.Float_Positive_NonZeroGeometryThe linear geometry of the pipe feature in coordinate space. May only contain a single straight segment with two end points, representing a pipe section between pits without bends.geometry_linear_segment_simplePipes PressureElement representing the feature class of Sewerage Pipes PressurePipe PressureElement representing a sewer pipe pressurised (rising main).UseThe function of this pipe in the network.DisusedDisused Pressure PipeEffluentTreated Wastewater PipeReuseTreated Wastewater Reuse PipeRisingRising or Pressure MainDefault ValueScourScour MainVacuumVacuum MainAlignment_mAverage offset distance from casdastre boundary to the main.Float_Positive_NonZeroDiameter_mmNominal pipe diameter in millimetres.positiveIntegerMaterialPipe materialUPVCUnplasticised Poly-Vinyl ChlorideDefault ValueABSAcrylonitrile Butadiene StyreneCast IronCast IronDICLDuctile Iron Concrete LinedGRPGlass Reinforced PipeMSCLMild Steel Concrete LinedOPVCOriented Poly-Vinyl ChloridePEPolyethyleneBCBox CulvertHDPEHigh Density Polyethylene (includes Haries Black Brute)PVCPoly-Vinyl ChlorideVC-HVitrified Clay - HepworthVC-NVitrified Clay - NaylorVCVitrified ClayMDPEMedium Density PolyethyleneClassThe pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.16Class 16Default Value6Class 69Class 912Class 1218Class 1820Class 20K9Class K9K12Class K12SN5000SN5000SN8000SN8000SN10000SN10000PN6.3PN6.3PN8PN8PN10PN10PN12.5PN12.5XClass XYClass YZClass ZAverage Depth_mNominal depth in metres to the top of the pipe.FloatProtectionThe protective material enveloping the pipe.FBEFusion Bonded EpoxyWrappedPlastic WrappedEncasedEncasedSheathedSheathedSintakoteNo description providedEmbedmentEmbedment type from WSAA Sewerage Codes.Type 1WSAA Sewerage embedment type 1Type 2WSAA Sewerage embedment type 2Type 3WSAA Sewerage embedment type 3Type 4WSAA Sewerage embedment type 4Type 5WSAA Sewerage embedment type 5Type 6WSAA Sewerage embedment type 6Type 7WSAA Sewerage embedment type 7Type 8WSAA Sewerage embedment type 8Type 9WSAA Sewerage embedment type 9Type 10WSAA Sewerage embedment type 10Type 11WSAA Sewerage embedment type 11Type 12WSAA Sewerage embedment type 12Type 13WSAA Sewerage embedment type 13Joint TypePipe to pipe join method.Rubber RingRubber RingDefault ValueSolvent WeldSolvent WeldElectrofusion WeldElectrofusion WeldRock ExcavatedValue indicating whether rock was excavated from the pipe channel.booleanPipe Length_mActual material length of the pipe. Not the horizontal length of the geometry.Float_Positive_NonZeroGeometryThe linear geometry of the pipe feature in coordinate space.geometry_linear_singlepath_simpleValvesElement representing the feature class of Sewerage ValvesValveElement representing a sewer valve fittingUseThe function of this valve in the network.ServicesService ValveScourScour ValveAirAir ValveRefluxReflux ValveOverflowOverflow ValveControlControl ValveDefault ValueTypeThe physical configuration of the valveGas ReleaseGas ReleasePressure ReleasePressure ReleaseScourScourRefluxRefluxSwing CheckSwing CheckButterflyButterflyKnife GateKnife GatePlug ValvePlug ValveVacuum ReleaseVacuum ReleasePenstock DoorPenstock DoorStopStop ValveDefault ValueDiameter_mmThe nominal bore diameter of the valvepositiveIntegerProtectionThe protective material enveloping the valve.FBEFusion Bonded EpoxyWrappedPlastic WrappedManufacturerManufacturers company or trading name.TycoTycoJohnJohnTurnfloTurnfloKeystoneKeystoneWattsWattsCrevetCrevetRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointFittingsElement representing the feature class of Sewerage FittingsFittingElement representing a sewer fitting other than a valveTypeThe physical configuration of the fittingBendBendConnectorConnectorConnector ThrustConnector ThrustDismantling JointDismantling JointGibaultGibaultTaperTaperTeeTeeWyeWyeCathodic Protection PointCathodic Protection PointDead PlateDead PlateExternal Dead EndExternal Dead EndTee Branch Dead EndTee Branch Dead EndTee Branch Ext Dead EndTee Branch Ext Dead EndPuddle FlangePuddle FlangeSampling PointSampling PointBooster PumpBooster PumpMaterialFitting materialDICLDuctile iron cement linedPVCPoly Vinyl ChlorideBody Size_mmThe nominal diameter of the major connecting pipe.positiveIntegerBranch Size_mmThe nominal diameter of the minor connecting pipe.positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointConnectionElement representing the feature class of sewer property connectionsConnectionElement representing a sewer property connectionDimensions Point Levels_mCall in standard elements for levels at the inspection opening. Level in meters against the vertical datum for this project.SurfaceLevel_mSurface level in metres AHD of this feature.FloatInvertLevel_mInvert level in metres AHD of this feature.FloatUseThe function of the house connection in the network.HouseHouse DrainDefault ValueCombinedCombined House DrainDiameter_mmThe nominal diameter of the connection conduit.positiveIntegerMaterialThe material of the connection conduit.UPVCUnplastised Poly-Vinyl ChlorideDefault ValueCast IronCast IronConcreteConcreteDICLDuctile Iron Concrete LinedFRCFibre Reinforced ConcreteFRPFibre Reinforced PlasticMPVCModified Poly-Vinyl ChlorideOPVCOrientated Poly-Vinyl ChloridePEPolyethyleneVCVitrified ClayMaterial ClassThe pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.SHSewer HeavySEHSewer Extra HeavyDefault ValueHCB LengthThe material length in metres of the house connection branch conduit.Float_Positive_NonZeroTypePhysical configuration of connection - based on WSAA standard types.Sloped BranchWSAA - Sloped Branch connectionRamp RiserWSAA - Ramp Riser connectionJump UpWSAA - Jump Up connectionStubWSAA - Connection straight into Maintenance HoleTwin Jump UpWSAA - Twin Jump Up connectionTwin Ramp RiserWSAA - Twin Ramp Riser connectionChainage_mThe distance in metres from the centre of the downstream manhole to the point of connection of the offshoot branch.Float_Positive_NonZeroOffset_mThe distance measured square from the centre of the sewer main to the point of connection.Float_Positive_NonZeroLine NumberThe line identifier of the sewer main.String_32DSMHIDDownstream manhole identifier.String_32IO Distance_mDistance from a point perpendicular to the inspection opening to the centre of the downstream manhole along the axis of the sewer main.Float_Positive_NonZeroSO NearestPerpendicular distance from the inspection opening to the nearest cadastral boundary.Float_Positive_NonZeroSO OtherPerpendicular distance from the inspection opening to the next nearest cadastral boundary.Float_Positive_NonZeroGeometryThe linear geometry of the house connection feature in coordinate space. Digitise this line downstream from the inspection opening to the pipe or pit.If a point is desired, the inspection opening position may be taken as the start of the linegeometry_linear_singlepath_simple

&C&A&C&F&RPage &P

ADAC TransportASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATIONDESCRIPTIONTransportData structure constraining information on road related features.Pavement AreasRepresents the featureclass of road pavement areasPavementRepresents an area of road pavement.NameThe gazetted, or proposed, road name.String_254SurfaceData container for surface characteristics.SurfaceTypeThe surface type of the road or streetACAsphaltFDAFull Depth Asphalt2CBS2 Coat Prime and Seal1CBS1 Coat Prime and SealDUSTDust SealSMAStone Mastic AsphaltSSSLSlurry SealCPAVConcrete PaversCONCConcrete, Stencilled/AggregateBPAVBrick PaversGRVLGravel RoadPMBPoly Modified BitumenSurface Thickness_mmThe surface thickness in millimetrespositiveIntegerSurface Nom Width_mThe nominal width of the surface of the road or street as a decimal number in metres.Float_Positive_NonZeroPavement StructureData container for pavement structure characteristics.Pavement TypePavement construction typeFlexibleFlexible pavementRigidRigid pavementBase LayerDescribes the pavement base layerLayer TypeConstruction type of the base layer. Must be CONC if PavementType is Rigid, otherwise must not be CONCGR21Gravel 2.1 CBR60-80GR23Gravel 2.3 CBR45-60GR25Gravel 2.5 CBR15-30NGRLNatural Gravel/ConglomerateERTHEarthACAsphaltCONCConcreteLayer Depth_mmBase layer depth in millimetresFloat_Positive_NonZeroStabilisationBase layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueSubBase LayerDescribes the pavement sub-base layerLayer TypeConstruction type of the sub-base layer.GR21Gravel 2.1 CBR60-80GR23Gravel 2.3 CBR45-60GR25Gravel 2.5 CBR15-30NGRLNatural Gravel/ConglomerateERTHEarthLayer Depth_mmSub-base layer depth in millimetresFloat_Positive_NonZeroStabilisationSub-base layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueLower SubBase LayerDescribes the pavement lower sub-base layerLayer TypeConstruction type of the lower sub-base layer.GEOTGeotextileROCKRockGTRKGeotectile/RockGR25Gravel 2.5 CBR15-30Layer Depth_mmLower sub-base layer depth in millimetresFloat_Positive_NonZeroStabilisationLower sub-base layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValuePavement GeoTextilePavement geotextile type.Road Pavement Geotextile Types As per MRS11-27 Table 3.Class AClass A - As per MRS11-27 Table 3Class BClass B - As per MRS11-27 Table 3Class CClass C - As per MRS11-27 Table 3Class DClass D - As per MRS11-27 Table 3Class EClass E - As per MRS11-27 Table 3Sub GradeData container for subgrade structure characteristics.CBRCalifornia Bearing Ratio. An expression of the load bearing and shear properties of the material.positiveIntegerStabilisationSubgrade stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueGeometryPolygon geometry delineating the pavement area in coordinate space.geometry_area_multipatch_complexParking AreasRepresents the featureclass of parking areasParkingRepresents an area of parking pavement.NameParking area nameString_254No Of CarparksNumber of individual vehicle spaces.CarpositiveIntegerOn Off StreetValue indicating whether the parking is an uninterupted part of the road pavement, or a seperate area with road access.On StreetOn street parkingOff StreetOff street parkingSurfaceData container for surface characteristics.Surface TypeThe surface type of the parking areaACAsphaltFDAFull Depth Asphalt2CBS2 Coat Prime and Seal1CBS1 Coat Prime and SealDUSTDust SealSMAStone Mastic AsphaltSSSLSlurry SealCPAVConcrete PaversCONCConcrete, Stencilled/AggregateBPAVBrick PaversGRVLGravel RoadPMBPoly Modified BitumenSurface Thickness_mmThe surface thickness in millimetrespositiveIntegerSurface Area_sqmThe area of the parking surface as a decimal number in square metres.Float_Positive_NonZeroPavement StructureData container for pavement structure characteristics.Pavement TypePavement construction typeFlexibleFlexible pavementRigidRigid pavementBase LayerDescribes the pavement base layerLayer TypeConstruction type of the base layer. Must be CONC if PavementType is Rigid, otherwise must not be CONCGR21Gravel 2.1 CBR60-80GR23Gravel 2.3 CBR45-60GR25Gravel 2.5 CBR15-30NGRLNatural Gravel/ConglomerateERTHEarthACAsphaltCONCConcreteLayer Depth_mmBase layer depth in millimetresFloat_Positive_NonZeroStabilisationBase layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueSubBase LayerDescribes the pavement sub-base layerLayer TypeConstruction type of the sub-base layer.GR21Gravel 2.1 CBR60-80GR23Gravel 2.3 CBR45-60GR25Gravel 2.5 CBR15-30NGRLNatural Gravel/ConglomerateERTHEarthLayer Depth_mmSub-base layer depth in millimetresFloat_Positive_NonZeroStabilisationSub-base layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueLower SubBase LayerDescribes the pavement lower sub-base layerLayer TypeConstruction type of the lower sub-base layer.GEOTGeotextileROCKRockGTRKGeotectile/RockGR25Gravel 2.5 CBR15-30Layer Depth_mmLower sub-base layer depth in millimetresFloat_Positive_NonZeroStabilisationLower sub-base layer stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValuePavement Geo TextilePavement geotextile type.Class AClass A - As per MRS11-27 Table 3Class BClass B - As per MRS11-27 Table 3Default ValueClass CClass C - As per MRS11-27 Table 3Class DClass D - As per MRS11-27 Table 3Class EClass E - As per MRS11-27 Table 3Sub GradeData container for subgrade structure characteristics.CBRCalifornia Bearing Ratio. An expression of the load bearing and shear properties of the material.positiveIntegerStabilisationSubgrade stabilisation methodLimeLimeFoamed BitumenFoamed BitumenGeogridEarth Reinforcing MatCementCementDefault ValueGeometryPolygon geometry delineating the pavement area in coordinate space.geometry_area_multipatch_complexRoad EdgesRepresents the featureclass of road edgesRoad EdgeRepresents an edge feature of a pavement area.TypeRoad edge configuration.Type of Road Edge - As per DMR drawing 1033.B1Barrier Kerb Type 5B2Barrier Kerb & Channel Type 6B3Barrier Kerb & Channel Type 7B4Barrier Kerb & Tray Type 23B5Barrier Kerb & Tray Type 24SM1Semi-Mountable Kerb Type 8SM2Semi-Mountable Kerb Type 10SM3Semi-Mountable Kerb Type 12SM4Semi-Mountable Kerb & Channel Type 14SM5Semi-Mountable Kerb & Channel Type 15M1Mountable K&CM2Mountable K&CM3Mountable K&CM4Mountable KerbM5Mountable KerbM6Mountable KerbER1Edge RestraintER2Edge RestraintER3Edge RestraintER4Edge RestraintER5Edge RestraintINV600Concrete Channel Type 22INV900Concrete Channel Type 28BitumenBitumen Road EdgeConcConcrete Road EdgeLength_mLength in metres of edge material.Float_Positive_NonZeroPavement Extension_mmThe pavement extension, in millimetres, behind the back of kerb.positiveIntegerGeometryPolyline geometry describing the feature in coordinate space.geometry_linear_multipath_complexRoad IslandsRepresents the featureclass of road islandsRoad IslandRepresents an area of road island , local traffic calming, or median structure. Where the structure incorporates water sensitive urban design (WSUD) features, those features should be independently captured.TypeType of Road IslandSplitterSplitter IslandPed RefugePedestrian RefugeCenter MedianNo description providedRoundaboutRoundaboutRoad HumpRoad Hump - speed management measureLATMLocal Area Traffic Management featureArea_sqmThe area, in square metres, of the infill.Float_Positive_NonZeroInfill TypeType of Road Island InfillPlain ConcPlain ConcreteExposed AggExposed AggregateStamped ConcStamped ConcreteStencilled ConcStencilled ConcretePlain Coloured ConcPlain Coloured ConcreteConc PaversConcrete PaversBrick PaversBrick PaversAsphaltAsphaltGrassGrassLandscapedLandscapedGrass/LandscapedCombination of grass and landscaped elementsConc/GrassCombination of concrete and grassed elementsConc/LandscapedCombination of concrete and landscaped elementsGeometryPolygon geometry describing the feature in coordinate space.geometry_area_multipatch_complexPathwaysRepresents the featureclass of pathways. Subtypes are provided for the correct validation of in-ground paths, on-road cycleways and structures functioning as part of a linear path network.PathwayRepresents an on-ground footpath or cycleway feature. Do not use to describe on-road cycleway.UseIntended traffic use of the structure.SharedShared Pedestrian and CyclewayCycleWayBicycles onlyPedestrianPedestrians onlyStructureType of pathway structure. A fixed value of In Ground is required for this sub typeString_32Surface MaterialSurface material of the structure.ConcreteConcretePavedPavedBitumenBitumenGravelGravelEarthEarthSteelSteelStoneStoneTimberTimberWidth_mNominal width of the pathway in metres.Float_Positive_NonZeroDepth_mmThe nominal depth of the pathway material in millimetres.positiveIntegerGeometryPolyline geometry describing the feature in coordinate space.geometry_linear_singlepath_complexRoad PathwayRepresents a linear section of on-road cycleway.UseIntended traffic use of the structure.A fixed value of CycleWay is applied to this sub type.SharedShared Pedestrian and CyclewayCycleWayBicycles onlyPedestrianPedestrians onlyStructureType of pathway structure. A fixed value of On Road is required for this sub typeString_32Surface MaterialSurface material of the structure.A fixed value of Road Pavement is applied to this sub type.String_32Width_mNominal width of the marked pathway in metres.Float_Positive_NonZeroGeometryPolyline geometry describing the feature in coordinate space.geometry_linear_singlepath_complexPath StructureRepresents a structure functioning as a linear section of footpath or cycleway. Do not use to describe on-road cycleway.UseIntended traffic use of the structure.SharedShared Pedestrian and CyclewayCycleWayBicycles onlyPedestrianPedestrians onlyStructureType of pathway structure.BoardwalkBoardwalkCausewayCausewayFoot BridgeFoot BridgeStairsStairsRampRampSurface MaterialSurface material of the structure.ConcreteConcretePavedPavedBitumenBitumenGravelGravelEarthEarthSteelSteelStoneStoneTimberTimberSub Structure MaterialSurface material of the structure.ConcreteConcreteSteelSteelStoneStoneBrickBrickTimberTimberWidth_mNominal width of the pathway in metres.Float_Positive_NonZeroGeometryPolyline geometry describing the feature in coordinate space.geometry_linear_singlepath_complexPram RampsPram RampRepresents a pram ramp or disabled entry-point to a road edge.RotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointSub Soil DrainsSub Soil DrainRepresents a road sub-soil drain. Formerly called RoadSubsoilDrain in ADAC Version 3.0.1UseThe use (orientation) of the drain.Side DrainParallel to the kerbMitre DrainCross road drainTypeThe type (configuration) of the drain.Type BDMR - Perforated Pipe with textile sleeveType DDMR - Strip Filter DrainLength_mThe length in metres of the drain.Float_Positive_NonZeroGeometryPolyline geometry representing the centreline of the sub-soil drain in coordinate space.geometry_linear_singlepath_simpleFlush PointsFlush PointsGeometryPoint geometry representing the flush point of the sub-soil drain in coordinate space.geometry_point_singlepointCrash BarrierCrash BarrierRepresents a crash barrier featureTypeThe type of crash barrier employedArmor RailGalvanised Pressed Steel - Armor RailSteel Wire RopeSteel Wire RopeGeometryPolyline geometry representing the centreline of the sub-soil drain in coordinate space.geometry_linear_singlepath_complex

&C&A&C&F&RPage &P

ADAC Water SupplyASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONDETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATIONDESCRIPTIONData structure constraining the description of water supply features.PipesRepresents the feature class of water supply pipesPipeRepresents a water supply pipe feature.UseThe purpose of this feature in the network.ConduitService ConduitFire ServiceFire ServiceRaw WaterRaw Water PipeReticulationReticulation Pipe.Default ValueScourScour MainServiceDomestic ServiceTrunkTrunk Water MainDisusedDisused MainWasteWaste PipeFire DomesticDomestic Fire ServiceFire SprinklerFire Sprinkler ServiceFire Service Thru MeterFire Service Through MeterIrrigationIrrigation PipeAlignment_mOffset from casdastral boundary to the main.Float_Positive_NonZeroDiameter_mmNominal diameter of the pipe in millimetres.positiveIntegerMaterialThe pipe material.DICLDuctile Iron Concrete LinedUPVCUnplasticised Poly Vinyl ChlorideDefault ValueABSAcrylonitrile Butadiene StyreneCast IronCast IronConcreteConcreteCopperCopperGRPGlass Fibre Reinforced Plastic. Often centifugally cast. E.g. HOBASMSCLMild Steel Cement LinedOPVCOriented Poly Vinyl ChloridePolyPolyethylenePVC-MPoly Vinyl Chloride - ModifiedRCPReinforced Concrete PipeLDPEL:ow Density PolyethyleneMDPEMedium Density PolyethyleneHDPEHigh Density PolyethyleneClassThe pipe class as specified by the manufacture. Pipe class refers to the wall thickness and performance of the material.16Class 16Default Value6Class 69Class 912Class 1218Class 1820Class 20K9Class K9K12Class K12SN5000Class SN5000SN8000Class SN8000SN10000Class SN10000PN6.3Class PN6.3PN10Class PN10PN12.5Class PN12.5PN16Class PN16Type AType AProtectionThe corrosion protection method employed on the pipe material.FBEFusion Bonded EpoxySintakoteSINTAKOTE Fusion Bonded Medium Density Polyethylene.Sintakote - ConcreteSINTAKOTE Fusion Bonded Medium Density Polyethylene. - Concrete EncasedWrappedPlastic WrappedConcrete EncasedConcrete Encased (Untreated)Denso Taped WrappedWrapped in pipe and flange protection tape (Denso Tape).UncoatedUncoatedDepth_mThe average depth in metres that the pipe is buried. This measure is useful in most residential developments, but will be less reliable in sharply changing terrain or where significant cuts and fills have been applied.FloatEmbedmentEmbedment type from WSAA Sewerage Codes.Type AWSSA - Type AType BWSSA - Type BType CWSSA - Type CType DWSSA - Type DType EWSSA - Type EType FWSSA - Type FType GWSSA - Type GType HWSSA - Type HType JWSSA - Type JType KWSSA - Type KType LWSSA - Type LType MWSSA - Type MLength_mMaterial length of the pipe in metres.Float_Positive_NonZeroGeometryPolyline representing the geometry of the feature in coordinate space.geometry_linear_singlepath_simpleValvesRepresents the feature class of water supply valvesValveRepresents a water supply valve feature.UseThe purpose of the valve in the network.ControlControl ValveDefault ValueZone BoundaryZone Boundary Valve. Defines the boundary of a pressure zone or distribution maintenance area.ServiceService ValveTypeThe mechanical configuration of the valve.AirAir ValveBallBall ValveScourScour ValveRefluxReflux ValveSwing CheckSwing Check Valve. Used to prevent backflow within a pipeline.AltitudeAltitude ValvePressure ReducingPressure Reducing Valve.Pressure SustainingPressure Sustaining ValvePressure ReliefPressure relief Valve.GateGate Valve. Used for the isolation of sections and branches in pipelines.ControlControl ValveButterflyButterfly ValveStopStop ValveDefault ValueTrunk RefluxTrunk Reflux ValveDiameter_mmThe nominal bore diameter of the valve.positiveIntegerManufacturerThe company or trading name of the manufacturer.TycoTyco Flow Control Pacific Pty Ltd.For product listings and details visit http://tycowater.comJohnJohnTurnfloTurnfloKeystoneKeystoneWattsWattsCrevetCrevetRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointHydrantsRepresents the feature class of water supply hydrantsHydrantRepresents a water supply hydrant feature.UseThe purpose of the hydrant in the network.SpringSpring Hydrant.PillarPillar Hydrant.Diameter_mmThe nominal bore size of the hydrant.positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointMetersRepresents the feature class of water supply metersMeterRepresents a water supply meter feature.Serial NumberThe manufacturers serial number, as stamped or fixed on the meter.String_64TypeConfiguration of the meter.ConventionalStandard volumetric meterManifoldMeter with built-in valveMagflowElectronic Metering SystemDiameter_mmThe nominal bore diameter of the meter.positiveIntegerDialsThe number of dials on the reading face.positiveIntegerManufacturerThe company or trading name of the manufacturer.Although not presently constraining any values, these enumerations may used in applications to populate pick lists of suggested values.ABBABB Kent (Davies Shepherd, Kent)RMCReliance Manufacturing CompanyEmailEmailELSElster MeteringInitial ReadingThe reading on the meter face at the time of installation.positiveIntegerPrivate BoosterTrue indicates that the meter is associated with a private pressure boosting system.booleanOffset SideIs the offset from the left or the right side boundary when looking from the road.LeftLeft hand sideRightRight hand sideOffset_mThe distance in metres to measure along the frontage from the indicated side.Float_Positive_ZeroRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointFittingsRepresents the feature class of water supply fittingsFittingRepresents a water supply pipe fitting, other than a valve, meter or hydrantTypeThe fitting type.BendBendConnectorConnectorCross ConnectionCross ConnectionConnector ThrustConnector ThrustDismantling JointDismantling joints are designed to facilitate the removal of flanged valves from pipelines.GibaultGibaultTaperTaper. Joining pipes of unequal diameter.TeeT - Joint.WyeY - JointCathodic Protection PointCathodic Protection PointDead PlateDead PlateExternal Dead EndExternal Dead EndTee Branch Dead EndTee Branch Dead EndTee Branch Ext Dead EndTee Branch Extended Dead EndPuddle FlangePuddle FlangeReady TapReady TapSampling PointSampling PointBooster PumpBooster PumpMaterialThe fitting material.DICLDuctile Iron Concrete LinedPVCPoly Vinyl ChlorideBody Size_mmThe nominal diametre of the largest pipe entering the fitting.positiveIntegerBranch Size_mmThe nominal diametre of the smallest pipe entering the fitting.positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointMaintenance HolesRepresents the feature class of water supply maintenance access holesMaintenance HoleRepresents a water supply maintenance access hole feature.Chamber SizeData structure describing the chamber configuration and dimensions.RectangularData container for rectangular dimensions.LengthInternal lengh in millimetres for rectangular water maintenance holes.positiveIntegerWidthInternal width in millimetres for rectangular water maintenance holes.positiveIntegerCircularData container for circular dimensions.Internal diameter in millimetres for water maintenance holes.Diameter_mmDiameter in millimetrespositiveIntegerSurface Level_mThe height of the top surface of the lid, hatch, rim or roof. Surface level in meters against the vertical datum for this project.FloatInvert Level_mThe height of the top surface of interior floor/bottom. Invert level in meters against the vertical datum for this project.FloatConstructionMethod of chamber construction.PrefabricatedPrefabricatedInsituBuilt or poured in-situMaterialMaterial type for chamber construction.PVCPoly Vinyl ChoridePEPolyethyleneConcreteConcreteLid TypeChamber lid configuration and material.AluminiumAluminiumCast IronCast IronCI Conc InfillCast Iron Concrete InfillConcreteConcreteRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointService FittingsRepresents the feature class of water service fittingsService FittingRepresents a water service fitting feature.TypeThe type of service fittingDrinking FountainDrinking FountainFountain DecorativeA decorative fountainHot Water SystemHot Water System. Normally attached to a structure.PumpDomestic or irrigation, water moving or pressure maintenance pumpShowerOpen air public shower point, such as may be found at beachside parksTapWater delivery tap. Not to be used in place of irrigation stopcockBelow GroundIs the fitting below groundbooleanWater SaverDoes the fitting employ waste minimisation technology (other than auto shut-off)booleanAuto Shut OffDoes the fitting employ auto shut-off technologybooleanRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointIrrigation FittingsRepresents the feature class of irrigation fittingsIrrigation FittingRepresents an irrigation fitting feature.TypeThe type of irrigation fittingControl PanelIrrigation control panelSprinkler HeadIrrigation sprinkler headStopcockIrrigation Stopcock. Not to be used in place of tapConnectorIrrigation pipe connectorBelow GroundIs the fitting below groundbooleanRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointStorage TanksRepresents the feature class of water storage pointsStorage TankRepresents a domestic storage tank feature. Includes roofwater storage not fed from mains service.Not to be used for bulk storage features that are part of the mains distribution network.MaterialThe material that the storage tank is made from.PlasticPlasticSteelSteelConcreteConcreteSourceThe source of water in the tank.Rain WaterRoof water catchmentGround WaterGround water extracted from a borePonded WaterPonded water pumped from a surface water catchmentMains ServiceDrawn from a mains water supply serviceRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepoint

&C&A&C&F&RPage &PWALPOLE:should this be Concrete not cement?WALPOLE:another instance of fire serviceWALPOLE:another instance of water typeWALPOLE:how is a disused pipe as constructed?WALPOLE:should be None

ADAC Storm WaterASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONENUMERATION \ DETAILDESCRIPTIONStorm WaterData structure constraining information on stormwater features.PitsRepresents the feature class of stormwater pitsPitRepresents a stormwater maintenance hole or pit feature.Pit NumberThe pit identifier.String_32UsePurpose of the feature in the network.ManholeMaintenance or access pointPitPit only - no accessRoofwater Inspection ChamberRoofwater Inspection ChamberChamber ConstructionMethod of chamber construction.PrefabricatedPrefabricatedInsituBuilt or poured in-situChamber SizeRepresents the essential dimensions of the chamber. Contains a choice of structures that pertain to different configurations.RectangularDimensions of a rectangular chamber.Length_mmLength in millimetrespositiveIntegerWidth_mmWidth in millimetrespositiveIntegerCircularDimensions of a circular chamber.Drainage Manhole Circular Internal Diameter.Diameter_mmDiameter in millimetrespositiveIntegerExtendedDimensions of a circular chamber.Radius_mmRadius, in millimetres, of the circular endspositiveIntegerExtension_mmDistance, in millimetres, between the centre points of the circular endspositiveIntegerLid TypeThe type of lid or grate covering the opening.Galv GrateGalvanised Steel GrateCast Iron GrateCast Iron GrateCirc Cast IronCircular Cast Iron LidCirc Conc InfillCircular Concrete Infill LidSqr Cast IronSquare Cast Iron LidSqr Conc InfillSquare Concrete Infill LidRect Cast IronRectangular Cast IronRect Conc InfillRectangular Concrete Infill LidCI Frame Conc InfillCast Iron Frame Concrete InfillPrecast Cover SlabsLong Rectangular Concrete Cover Slabs (2 per pit)Hydroflow GrateHydroflow GrateCast Iron Bike/Ped Safe GrateCast Iron Bicycle and Pedestrian Safe GrateDimensions Point Levels_mCalls in the standard elements for surface and invert levelsSurfaceLevel_mSurface level in metres AHD of this feature.floatInvertLevel_mInvert level in metres AHD of this feature.floatDepth_mThe depth of the structure in metres. May be user-entered, or auto-calculated as the difference between the surface level and the invert level of the pit.Float_Posative_NonZeroInletRepresents a surface inlet to the pit. Set to nil if this pit does not have a surface inletInlet ConfigPositioning of the inlet against the pit.LeftLeft hand sideCentreCentreRightRight hand sideInlet TypeThe type of inlet employed.IPWEA - Field Inlet Type 1IPWEA - Grated Field Inlet Type OneIPWEA - Field Inlet Type 2 (600x600)IPWEA - Grated Field Inlet Type Two 600mm x 600mmIPWEA - Field Inlet Type 2 (600x900)IPWEA - Grated Field Inlet Type Two 600mm x 900mmIPWEA - KIL GullyIPWEA - Kerb Inline Gully PitIPWEA - LIL GullyIPWEA - Lip Inline Gully PitOTHER - Anti-Ponding GullyCouncil Specific Anti-Ponding GullyOTHER - Bro PitCouncil Specific Bro PitOTHER - DrainwayCouncil Specific Drainway PitOTHER - Field Inlet Type 1Council Specific Field Inlet (900mm x 900mm)OTHER - Field Inlet Type 2 (600x600)Council Specific Field Inlet (600mm x 600mm)OTHER - Field Inlet Type 2 (600x900)Council Specific Field Inlet (600mm x 900mm)OTHER - KIL GullyCouncil Specific Kerb Inline Gully PitOTHER - LIL GullyCouncil Specific Lip Inline Gully PitOTHER - Side Entry PitCouncil Specific Side Entry PitOTHER - Trench GrateCouncil Specific Trench GrateLintelRepresents the pit lintel. Set to nil if this pit does not have a lintel.Lintel ConstructionMethod of lintel construction.PrefabricatedPrefabricatedInsituBuilt or poured in-situLintel Length_mRepresents the length in metres of the lintel.1.21.2m2.12.1m2.42.4m33.0m3.63.6m4.84.8mOutlet TypeThe type of outlet for this pit.DryDryDefault ValueSurchargeSurchargeFire RetardantTrue of false value indicating whether fire retardant measures are incorporated.booleanRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the manhole or pit feature in coordinate space.geometry_point_singlepointEnd StructuresRepresents the feature class of stormwater EndStructuresEnd StructureRepresents a stormwater endstructure feature.Structure IDThe identifier for this end structure. Usually the textual identifier it would be labelled with on the face of a plan.String_32Structure Level_mThe surface level of the structure in metres against the vertical datum for the project.floatEnd WallData structure representing the end wall.TypeThe construction design type.Queensland Main Roads Department endstructure construction types for endwalls, wings and aprons.Type 1MRD Spec Type 1Type 2MRD Spec Type 2Type 3MRD Spec Type 3ConstructionThe method of constructionPrefabricatedPrefabricatedInsituBuilt or poured in-situWing WallData structure representing the wing wall.TypeThe construction design type.Queensland Main Roads Department endstructure construction types for endwalls, wings and aprons.Type 1MRD Spec Type 1Type 2MRD Spec Type 2Type 3MRD Spec Type 3ConstructionThe method of constructionPrefabricatedPrefabricatedInsituBuilt or poured in-situApronData structure representing the apron.TypeThe construction design type.Queensland Main Roads Department endstructure construction types for endwalls, wings and aprons.Type 1MRD Spec Type 1Type 2MRD Spec Type 2Type 3MRD Spec Type 3ConstructionThe method of constructionPrefabricatedPrefabricatedInsituBuilt or poured in-situGrate TypeType of grate used, if applicable.BaffledBaffledGratedGratedStilling BasinSilting basinOtherOtherTide GateType of tide or flood gate used, if applicable.Fibreglass ProprietaryFibreglass proprietaryFabricatedFabricatedControlledControlledOtherOtherPredominant MaterialThe predominant construction material of the endstructure.ConcreteConcreteReinforced ConcreteReinforced ConcreteGrouted RockGrouted RockRevetment MattressRevetment MattressOutlet Protection TypeCorrosion protection method employed on the outlet.GrassedGrassed banksConcreteConcreteStone PitchedStone PitchedPlaced RockPlaced RockGrouted RockGrouted RockRevetment MattressRevetment MattressRock Filled Wire BasketRock Filled Wire BasketRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the EndStructure in coordinate space.geometry_point_singlepointFittingsRepresents the feature class of stormwater FittingsFittingRepresents a point fitting in a stormwater system.At this stage an EndCap is the only kind of fitting supported. Future stormwater point fitting features should be included in this typeFitting TypeThe type of stormwater fitting.End CapA stormwater end capRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the fitting in coordinate space.geometry_point_singlepointPipesRepresents the feature class of stormwater pipesPipeRepresents a stormwater pipe feature.Dimensions Invert Levels_mCalls in the standard elements for upstream and downstream invert levelsUS_InvertLevel_mInvert level in metres AHD of this pipe end.floatDS_InvertLevel_mInvert level in metres AHD of this pipe end.floatDimensions Surface Levels_mCalls in the standard elements for upstream and downstream surface levelsUS_SurfaceLevel_mSurface level in metres AHD vertically above this pipe end.floatDS_SurfaceLevel_mSurface level in metres AHD vertically above this pipe end.floatPipe StructureContainer for a choice of pipe cross-sectional measures.Circ PipeCircular pipe cross-sectional description.Diameter_mmThe internal diameter of the pipe in millimetres.positiveIntegerMaterialThe pipe wall materialRCPSteel Reinforced Concrete PipeFRCFibre Reinforced Concrete PipePVCPolyvinylchloride PipeHDPEHigh Density Polyethylene (also known as Black Brute)PPPolypropylene Pipe (also known as Black Max)RPPRibbed Polypropylene Pipe (also known as RibStruct)GRPGlass Reinforced Plastic Pipe (also known as Hobas)CSPHelically Corrugated Galv Steel PipeCAPHelically Corrugated Aluminium PipeRCBCReinforced Concrete Box CulvertSLBCSlab Link Box CulvertARMCO STEELArmco steelSFRCSlotted fibre reinforced concreteClassThe pipe wall class1Class 12Class 23Class 34Class 46Class 68Class 810Class 10Joint TypeThe joint type of the pipe sectionFJFlush JointRRJRubber Ring JointBox PipeRectangular pipe cross-sectional description.Height_mmHeight in millimetres of the internal cross sectionpositiveIntegerWidth_mmWidth in millimetres of the internal cross sectionpositiveIntegerMaterialWall material of the box section.RCBCReinforced Concrete Box CulvertSLBCSlab Link Box CulvertCellsThe number of cells in the pipe course.positiveIntegerConcrete Cover TypeThe pipe protection regime employed.StandardStandardSaltwaterSaltwaterGradePipe gradient as a percentage. Derivable from invert levels and horizontal length.Float_Positive_ZeroLength_mPipe material length in metres.Float_Positive_NonZeroGeometryPolyline geometry representing the feature in coordinate space.The recommendation for multicell courses is to store multiple paths within the polyline. It is recommended that all paths are digitised in the direction of flow.geometry_linear_multipath_simpleSurface DrainsRepresents the feature class of stormwater pipesSurface DrainRepresents a linear surface drain. May include natural features as well as constructed where they function as part of a contributed asset.TypeThe type of drain or channel.CanalCanalOpen DrainOpen DrainOverland Flow PathOverland Flow PathFlat Open SurfaceFlat Open SurfaceNatural WaterwayNatural WaterwayInfiltration TrenchInfiltration TrenchShapeCross-sectional shape of the drain.Flat Bottom DrainFlat Bottom DrainVee DrainVee DrainSwale DrainSwale DrainNatural ChannelNatural ChannelDimensions Invert Levels_mCalls in the standard elements for upstream and downstream invert levelsUS_InvertLevel_mInvert level in metres AHD of this pipe end.floatDS_InvertLevel_mInvert level in metres AHD of this pipe end.floatAverage GradeThe average gradient over the whole length of the feature, as a percentage. Derivable from the difference in invert levels and the horizontal length of the geometry.Float_Positive_ZeroLength_mThe material length, in metres, of the centreline of the channel.Float_Positive_NonZeroGeometryPolyline geometry representing the feature in coordinate space.Digitise each individual length of channel as a single unbroken path.geometry_linear_singlepath_simpleWSUD PointsRepresents the feature class of Water Sensitive Urban Design (WSUD) point featuresGPT ComplexRepresents a commerial or custom in-pit GPT unit.Must occur collocated with a pit.GPT ComplexRepresents a complex commercial or custom StormWater Quality Improvement Device (SQID).Sqid IdThe string identifier of the device, as it would appear on a plan.String_32ConstructionCommercialManufacturerThe manufacturer of the unitString_64ModelThe unit model codeString_64SizeThe planimetric size of the device. This element is nillable because the manufacturer and model are mandatory, but if capture software designers wish to automatically populate the sizes from a list of known device models, then all of the appropriate dimensions must be suppliedRectangularPlanimetric dimensions of a rectangular device.Length_mmLength in millimetrespositiveIntegerWidth_mmWidth in millimetrespositiveIntegerCircularPlanimetric dimensions of a circular device.Diameter_mmDiameter in millimetrespositiveIntegerCustomSizeThe dimensions of the device. This element is mandatory for custom built devices. The appropriate dimensions must be suppliedRectangularPlanimetric dimensions of a rectangular device.Length_mmLength in millimetrespositiveIntegerWidth_mmWidth in millimetrespositiveIntegerCircularPlanimetric dimensions of a circular device.Diameter_mmDiameter in millimetrespositiveIntegerFunction 1The first function of the WSUD point. The device must have at least one function. Usually Gross Pollutant Capture will be the most important function.Gross Pollutant CaptureGross Pollutant CaptureSediment CaptureSediment CaptureOil / Grit SeparationOil / Grit SeparationFiltrationFiltration of fine particulates from stormwater before discharging to a downstream drainage system.Function 2The second function of the WSUD point, if applicableGross Pollutant CaptureGross Pollutant CaptureSediment CaptureSediment CaptureOil / Grit SeparationOil / Grit SeparationFiltrationFiltration of fine particulates from stormwater before discharging to a downstream drainage system.Function 3The third function of the device, if applicableGross Pollutant CaptureGross Pollutant CaptureSediment CaptureSediment CaptureOil / Grit SeparationOil / Grit SeparationFiltrationFiltration of fine particulates from stormwater before discharging to a downstream drainage system.US Pipe Diameter_mmThe upstream pipe diameter in millimeterspositiveIntegerDS Pipe Diameter_mmThe downstream pipe diameter in millimeterspositiveIntegerSurface Level_mThe surface level at the top of the devicefloatDimensions Invert Levels_mCalls in the standard elements for upstream and downstream invert levelsUS_InvertLevel_mInvert level in metres AHD of this pipe end.floatDS_InvertLevel_mInvert level in metres AHD of this pipe end.floatCleanout Level_mThe level to which the device must be cleaned out, in metres against the vertical datum of the project.floatDepth_mThe depth, in metres, of the device.Float_Positive_NonZeroSump Depth_mThe depth, in metres, of the sump, if applicableFloat_Positive_NonZeroHas Filter MediaTrue if the device has filtration media or a filter capsule installed.booleanHas BasketTrue if the device has a litter basket installed.booleanHas BoardsTrue if the device has drop-boards or penstock installed.booleanDesign Flow_m3sDesign Flow in cubic meters per secondFloat_Positive_NonZeroMax Contaminant Volume_m3Maximum contaminant retention volume in cubic metres.Float_Positive_NonZeroMaintenance Cycle_mnthsThe minimum maintenance cycle in months (refer to specifications)positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointGPT SimpleRepresents a simple StormWater Quality Improvement Device (SQID), such as a net,basket or grate, whether freestanding or fitted to existing infrastructure.Represents a Water Sensitive Urban Design point feature that is a simple grate, basket or net fitted to existing infrastructure.Includes custom In-Pit or End-of-Line features or In-Line features such as trash-racks on drainage lines.Spatially, these features must be collocated with pits, endstructures or placed on pipes or drainage lines. Therefore, as in reality, whether the feature is In-Pit, In-Line or End-of-Line is determined by its placement with other features.Sqid IdThe string identifier of the device, as it would appear on a plan.String_32ConstructionThe construction methodPrefabricatedPrefabricatedInsituBuilt or poured in-situManufacturerThe manufacturer if applicableString_64ModelThe model if applicableString_64Treatment MeasureSimple treatment measures fitted to existing infrastructure to intercept solid litter being transported in stormwater.BasketA simple basket fitted to existing infrastructure to intercept solid litter being transported in stormwater.NetA simple net fitted to existing infrastructure to intercept solid litter being transported in stormwater.Vertical GrateA vertical grate across a drainage line or endstructure to intercept solid litter being transported in stormwater.Horizontal GrateA horizontal grate across an inlet to intercept solid litter being transported in stormwater.Function 1The first function of the WSUD point. Has a fixed value because all GPTSimple points are.String_32Length_mmThe length of the devicepositiveIntegerWidth_mmThe width of the devicepositiveIntegerMaintenance Cycle_mnthsThe minimum maintenance cycle in months. This is the revisit interval for clearing captured rubbish.positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointNon GPT SimpleRepresents a WSUD point feature that is not a simple litter trap, such as a small sand filter, sediment pond, aquifer storage, infiltration measure or energy dissipater.Sqid IdThe string identifier of the device, as it would appear on a plan.String_32ConstructionThe construction methodPrefabricatedPrefabricatedInsituBuilt or poured in-situManufacturerThe manufacturer if applicableString_64ModelThe model if applicableString_64Treatment MeasureTreatment measures applicable to WSUD points that are neither simple nor complex Gross Pollutant TrapsInfiltration PondInfiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.Infiltration TankInfiltration measure designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.Aquifer Storage TankAquifer Storage TankSand FilterA sand filter is a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.Energy DissipaterAn installation in a drainage line, usually of concrete or stone, designed to dissipate the kinetic energy of flowing stormwater, to minimise its potential for erosion and damage. Often placed immediately downstream of an endstructure, but may conceivably be anywhere needed in a drainage line.Function 1The first function of the WSUD point. Must be supplied.Sediment CaptureSediment CaptureSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.InfiltrationInfiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.Aquifer StorageAquifer StorageEnergy DissipationThe dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.Function 2The second function of the WSUD point, if applicableSediment CaptureSediment CaptureSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.InfiltrationInfiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.Aquifer StorageAquifer StorageEnergy DissipationThe dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.Function 3The third function of the device, if applicableSediment CaptureSediment CaptureSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.InfiltrationInfiltration measures typically consist of holding pond or tank designed to promote infiltration of appropriately treated water to surrounding soils. The primary function of these devices is runoff volume control rather than pollutant removal.Aquifer StorageAquifer StorageEnergy DissipationThe dissipation of kinetic energy from flowing storwater to reduce its potential for erosion and damage.Length_mmThe length of the devicepositiveIntegerWidth_mmThe width of the devicepositiveIntegerMaintenance Cycle_mnthsThe minimum maintenance cycle in months. This is the revisit interval for maintenance or inspection, if applicable.positiveIntegerRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)Float_DirectionGeometryPoint geometry representing the feature in coordinate space.geometry_point_singlepointWSUD AreasRepresents the feature class of Water Sensitive Urban Design (WSUD) area featuresWSUD AreaRepresents a Water Sensitive Urban Design (WSUD) area feature. Also often called a StormWater Quality Improvement Device (SQID).Use area features to represent constructed wetlands, bioretention basins, biofiltration beds, swales etc.Sqid IdThe string identifier of the device, as it would appear on a plan.String_32Treatment MeasureThe treatment measure employed. Choose from a list relevant to complex area features.Buffer StripA buffer strip is a vegetated slope. Stormwater flows across a buffer strip. Treatment is provided by infiltration to the soil and by filtration of shallow flow through the vegetation.SwaleA swale is a shallow trapezoidal channel lined with vegetation. Stormwater flows along a swale. Treatment is provided by infiltration to the soil and by filtration of shallow flow through the vegetation.Bioretention SwaleBioretention swales include a vegetated infiltration trench within the invert of a swale. Incorporating the infiltration trench enhances removal of both particles and nutrients.Sedimentation BasinA sedimentation basin is a small pond, about 1m deep, designed to capture coarse to medium sediment from urban catchments. Treatment is provided primary through settling of suspended particles.Bioretention BasinA bioretention basin is a vegetated bed of filter material, such as sand and gravel. The basin is designed to capture stormwater runoff which then drains through the filter media. Pollutants are removed by filtration and by biological uptake of nutrients.Constructed WetlandConstructed wetland systems are shallow, vegetated water bodies the use enhanced sedimentation, fine filtration and biological uptake processes to remove pollutants from stormwater.Function 1The first function of the WSUD area. At least one function must be supplied. Choose from a list relevant to complex area features.Gross Pollutant CaptureGross Pollutant Capture is the function of removing coarse particulate matter from stormwater.Sediment CaptureSediment Capture is the function of capturing coarse to medium sediment from urban catchments. Treatment is provided primarily through settling of suspended particles.Oil / Grit SeparationOil / Grit SeparationSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.PermeationPermeation allows water to penetrate the surface and join subterranean flowsVegetated FiltrationVegetated FiltrationBioretentionBioretentionFunction 2The second function of the WSUD area, if applicable.Gross Pollutant CaptureGross Pollutant Capture is the function of removing coarse particulate matter from stormwater.Sediment CaptureSediment Capture is the function of capturing coarse to medium sediment from urban catchments. Treatment is provided primarily through settling of suspended particles.Oil / Grit SeparationOil / Grit SeparationSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.PermeationPermeation allows water to penetrate the surface and join subterranean flowsVegetated FiltrationVegetated FiltrationBioretentionBioretentionFunction 3The third function of the WSUD area, if applicable.Gross Pollutant CaptureGross Pollutant Capture is the function of removing coarse particulate matter from stormwater.Sediment CaptureSediment Capture is the function of capturing coarse to medium sediment from urban catchments. Treatment is provided primarily through settling of suspended particles.Oil / Grit SeparationOil / Grit SeparationSand FiltrationSand Filtration occurs in a sand layer designed to filter fine particulates from stormwater before discharging to a downstream drainage system.PermeationPermeation allows water to penetrate the surface and join subterranean flowsVegetated FiltrationVegetated FiltrationBioretentionBioretentionPonding Area_m2Area of Temporary Ponding or Extended Detention in square metres.Float_Positive_NonZeroPonding Depth_mAverage depth of Temporary Ponding or Extended Detention in metres.Float_Positive_NonZeroFilter Area_m2Area of Bioretention filter media in square metres.Float_Positive_NonZeroFilter Depth_mDepth of Bioretention filter media in metres.Float_Positive_NonZeroTransition Depth_mDepth of the Bioretention Transition Layer in metres.Float_Positive_NonZeroDrainage Depth_mDepth of the Bioretention Drainage Layer in metres.Float_Positive_NonZeroMacrophyte Zone Area_m2The vegetated area in square metres (may be zero). Area of vegetated portion of constructed wetland (macrophyte zone)Float_Positive_ZeroMacrophyte Zone Depth_mAverage depth of vegetated portion of constructed wetland (macrophyte zone).Float_Positive_NonZeroCoarse Sediment Area_m2Maximum area of ponding (for coarse sediment capture) before bypass.Float_Positive_ZeroSediment Volume_m3Volume of sediment capacity in cubic metresFloat_Positive_NonZeroMin Surface Level_mMinimum surface level within structure (above or below water surface level).floatPermanent Pond Level_mWater surface level during normal dry weather.floatOutlet Level_mThe surface level in metres of the bypass, or spillway, or other overflow outlet structure.floatDesign Flow_m3sThe maximum design flow of the feature in cubic metres per secondFloat_Positive_NonZeroHas SpillwayWhether the feature has a spillwaybooleanMaintenance Cycle_mnthsThe minimum maintenance cycle in months (refer to specifications)positiveIntegerGeometryPolygon geometry representing the feature in coordinate space.geometry_area_multipath_complex

&C&A&C&F&RPage &P

ADAC OpenSpaceASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONENUMERATIONDESCRIPTIONENUMERATIONDESCRIPTIONOpen Space AreasRepresents the feature class of open space areasOpen Space AreaRepresents a top-level area of open space regarded as a single functional area, such as a park or recreation area. May be, but not necessarily, coincident with cadastral boundaryNameThe offical name or description of the Open Space area (eg: Smith St Park, Stockland Park Sporting complex)String_64TypeThe type of Open Space area eg: Recreational, Bushland, Sporting ComplexRecreationalRecreationalBushlandBushlandRoad ReserveRoad ReserveSpecial FacilitySpecial FacilityGeometryThe geometry representing this feature in coordinate space.geometry_area_multipatch_complexActivity AreasRepresents the feature class of activity areasActivity AreaRepresents an activity area such as a playground or excercise areaUseThe type of use for the Activity Site eg: Animal, Fitness, Play, SportAnimalAnimalFitnessFitnessPlayPlaySportsSportsTypeThe type of Activity Site. Eg: Sports Field, Cycling FacilityString_64Under Surface MaterialThe material type of Undersurfacing eg: Bark, Rubber, GrassedBarkBarkBitumenBitumenConcreteConcreteGrassGrassGravelGravelRubber MattingRubber MattingSandSandSynthetic GrassSynthetic GrassEdgeTypeEdging type eg. Concrete, Timber Sleeper, NoneConcreteConcreteTimber SleeperTimber SleeperNoneNoneGeometryThe geometry representing this feature in coordinate space.geometry_area_multipatch_complexActivity PointsRepresents the feature class of activity pointsActivity PointRepresents an activity point feature. E.g: Animal, Fitness, Play or Sports activity item.UseThe activity use categoryAnimalAnimalFitnessFitnessPlayPlaySportsSportsTypeThe activity item typeString_64MaterialThe material type of Activity Item eg: Timber, AluminiumAluminiumAluminiumCombinationCombinationFibreglassFibreglassPlasticPlasticRubberRubberSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedStainless SteelStainless SteelTimberTimberThemeThe theme of the Activity item. Eg: Kangaroo, Boat, Fort, CarString_64UnitsThe number of units present eg: 1, 2, 3posativeintegerManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointBarbequesRepresents the feature class of barbequesBarbequeRepresents an individual barbeque facilityEnergySourceThe Source of energy for the BBQ. Ie: Mains, Bottled, SolarMainMains powerSolarSolar powerBottled GasBottled gasWoodWood firedPlatesThe number of plates fitted in the BBQ structure.Minimum (Inclusive) Value: 1At least one plate must be recorded.Maximum (Inclusive) Value: 10Up to ten plates are provided for, where they are built into a single structure.SurroundingMaterialThe material type of the surround structure ie: brick, steel and TimberMasonryMasonrySteel and TimberSteel and TimberTopMaterialThe material type of the top structure ie: Tiled, marble, steelConcreteConcreteTiledTiledMarbleMarbleStainless SteelStainless SteelManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointTablesRepresents the feature class of TablesTableRepresents a table unit that may include fixed seating. Not to be used for seating that does not include a table as its main feature.TypeThe type of Unit eg: Table, Bench or counter.BenchBenchCounterCounterTableTableSeatingSeating details. Element should be nil if no seating is present.Seat TypeThe configuration of the associated seating.BenchBench seatPost and StoolFixed post with stool topPost and SeatFixed post with non-swivelling seatPost and Swivel SeatFixed post with swivelling seatPlacesThe number of individuals the seating is designed for. This attribute may be used to help determine the capacity of a recreational facility.posativeintegerMaterialThe material type of Table/Seat eg: Timber, AluminiumAluminiumAluminiumConcreteConcretePlasticPlasticStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberTimber and SteelTimber and SteelManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointSeatsRepresents the feature class of seats. Does not include seating that is part of a table feature.SeatRepresents a seat feature. Includes freestanding seats and border seating mounted in garden walls. Represents a seat unit that does not include a table as its main feature.Seat TypeThe configuration of the seating.FreestandingFreestanding bench seatBorderBorder seating set in garden wall or similar low structure.PlacesThe number of individuals the seating is designed for. This attribute may be used to help determine the capacity of a recreational facility.posativeintegerMaterialThe primary material type of Seat eg: Timber, AluminiumAluminiumAluminiumConcreteConcretePlasticPlasticStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberTimber and SteelTimber and SteelManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointWaste Collection PointsRepresents the feature class of waste collection pointsWaste Collection PointRepresents a waste collection point featureTypeThe type of Bin/Waste collection point eg: Std Litter Bin, Wheelie Bin EnclosureRecycle BinRecycle BinStandard Litter BinStandard Litter BinWheelie Bin EnclosureWheelie Bin EnclosureWheelie Bin StandWheelie Bin StandMaterialThe material type of Bin/Waste collection point eg: Aluminium, SteelAluminiumAluminiumPlasticPlasticStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberTimber and SteelTimber and SteelManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointBicycle FittingsRepresents the feature class of bicycle fittingsBicycle FittingRepresents a bicycle fitting featureTypeThe type of Bicycle fitting eg: Bicycle Rack, Bannana RailBanana RailBanana RailBicycle RackBicycle RackChicaneChicaneMaterialThe material type of Bicycle fitting eg: Timber, AluminiumAluminiumAluminiumStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberTimber and SteelTimber and SteelManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointGeneral FixturesRepresents the feature class of general fixtures.General FixtureRepresents a general fixture feature. This is a class of minor point based fixtures not complex enough for a specific feature class.TypeThe type of Fixture eg: Dog bag dispensers, Fish cleaning stationDog Bag DispenserDog Bag DispenserFish Cleaning StationFish Cleaning StationGoal PostGoal PostPlanter BoxPlanter BoxFlag PolesFlag PolesScoreboardScoreboardMaterialThe material type of Fixture eg: Timber, AluminiumAluminiumAluminiumPlasticPlasticStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberMasonryMasonryCombinationCombinationManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointBarriers ContinuousRepresents the feature class of continuous linear barriers.Barrier ContinuousRepresents a continuous linear barrier feature, such as fencing, walls, handrail or bollard run. Do not use for retaining walls.TypeThe type of Barrier eg: Vehicle Barrier, Safety Fencing, Bollard Run, GateBollard RunBollard RunDunal FencingDunal FencingGeneral FencingGeneral FencingHandrailHandrailPedestrian GatePedestrian GateSafety FencingSafety FencingStock FencingStock FencingVehicle BarrierVehicle BarrierVehicle GateVehicle GateUpright MaterialThe material type of Barrier Uprights eg: Timber, AluminiumAluminiumAluminiumConcreteConcreteSteelSteelStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedStone BoulderStone BoulderTimberTimberLink MaterialThe material type of Barrier Link Material eg: None, Chain, WireNoneNoneAluminium Safety PanelAluminium Safety PanelChainChainConcreteConcreteSafety GlassSafety GlassTimber PanelTimber PanelWire MeshWire MeshWire StrandWire StrandTop MaterialThe material type of Barrier Topping Material eg: None, Chain, Barbed WireNoneNoneAluminiumAluminiumChainChainSteel RailSteel RailTimber RailTimber RailWire BarbedWire BarbedWire StrandWire StrandLength_mThe lineal length of the barrier in metresFloat_Posative_NonZeroHeight_mThe height of the barrier in metresFloat_Posative_NonZeroUpright NumberTotal number of uprights in the run. For fencing, this will be the number of posts. For a bollard run, it will be the number of bollards.posativeintegerGeometryThe geometry representing this feature in coordinate space.geometry_linear_singlepath_complexIt is recommended, but not mandatory, that each vertex represents an upright, particularly for bollard runs. This allows the geometry to be exploited to identify the individual features if necessary.Barriers PointRepresents the feature class of point barriers.Barrier PointRepresents a barrier feature that controls access at a single point, such as a locking post or single bollard.TypeThe type of Barrier Point eg: Bollard, Locking PostBollardBollardLocking PostLocking PostUpright MaterialThe material type of Barrier Uprights eg: Timber, AluminiumAluminiumAluminiumConcreteConcreteSteelSteelStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedStone BoulderStone BoulderTimberTimberGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointRetaining WallsRepresents the feature class of retaining walls.Retaining WallRepresents a continuous retaining wall feature. Includes terrestrial, freshwater and marine revetment walls.UseContext of use for this wall. i.e Terrestrial or MarineTerrestrialTerrestrial (land based) revetment wallFreshwaterFreshwater revetment wall. Designed to cope with freshwater flood levelsMarineMarine revetment wallMaterialThe material/type of Retaining Wall eg: Rock, Conc. Block, Conc. CribBoulderBoulderConcreteConcreteConcrete cribConcrete cribMasonryMasonryRockRockTimber SleeperTimber SleeperTimber CribTimber CribGeometryThe geometry representing this feature in coordinate space.geometry_linear_multipath_complexSheltersRepresents the feature class of sheltersShelterRepresents an individual open space shelter featureTypeThe type of structure eg: Sail, RigidRigidRigidSailSailConstructionTypeThe type of shelter constructed eg: Prefab or Built insituPrefabricatedPrefabricatedInsituBuilt or poured in-situFloor MaterialThe material type of the Floor eg: Concrete, TimberConcreteConcretePavedPavedTimberTimberWall MaterialThe material type of the Walls eg: Timber/cladding, Reinforced BlockNoneNoneConcreteConcreteCladdingCladdingMasonryMasonryStainless SteelStainless SteelInsulated Steel PanelInsulated Steel PanelGalvanised SteelGalvanised SteelPowder Coated SteelPowder Coated SteelTimberTimberRoof MaterialThe material type of the Roof eg: Steel Sheeting, Masonary tilesMasonry TilesMasonry TilesSailSailSteel SheetsSteel SheetsTimber slatsTimber slatsManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointArtworksRepresents the feature class of open space artworksArtworkRepresents an individual instance of open space artworkTypeThe type of Artwork eg: Sculpture, StatueEntry StatementEntry StatementMemorialMemorialMonumentMonumentMosaicMosaicPlaquePlaqueSculptureSculptureStatueStatueMaterialThe material type of Artwork eg: Timber, AluminiumAluminiumAluminiumBronzeBronzeConcreteConcreteFibreglassFibreglassMasonryMasonryPlasticPlasticStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedStoneStoneTileTileTimberTimberCombinationCombinationGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointBuildingsRepresents the feature class of open space buildingsBuildingRepresents an open space building feature, such as a toilet block, bandstand.Not to be used for shelters.TypeThe type of Building eg: Grandstand, BandstandAmphitheatreAmphitheatreArbourArbourBandstandBandstandGrandstandGrandstandOpen SeatingOpen SeatingViewing PlatformViewing PlatformMaterialThe material type of Building eg: Timber, BrickAluminiumAluminiumConcreteConcreteMasonryMasonryStainless SteelStainless SteelSteel GalvanisedSteel Galvanised`Steel Powder CoatedTimberTimberCombinationCombinationGeometryThe geometry representing this feature in coordinate space.geometry_area_singlepatch_complexBoating FacilitiesRepresents the feature class of boating facilitiesBoating FacilitiyRepresents a boating facility feature, such as a pontoon, ramp or jetty.TypeThe type of Boating Facility eg: Jetty, PierJettyJettyPierPierRampRampSlipwaySlipwayMaterialThe material type of Boating Facility eg: Timber, AluminiumAluminiumAluminiumConcreteConcreteStainless SteelStainless SteelSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberCombinationCombinationGeometryThe geometry representing this feature in coordinate space.geometry_area_singlepatch_complexElectrical FittingsRepresents the feature class of electrical fittingsElectrical FittingRepresents an electrical fitting point feature, including lighting, whether freestanding or fixed to an existing structure.TypeThe type of Electrical Component eg: Light, Switch Board, Power OutletLightLightPitPitPolePolePower OutletPower OutletSwitch Board/Meter BoxSwitch Board/Meter BoxMaterialThe material type of the component eg: Aluminium, SteelAluminiumAluminiumConcreteConcretePlasticPlasticStainless SteelStainless SteelGalvanised SteelGalvanised SteelPowder Coated SteelPowder Coated SteelStoneStoneWoodWoodEnergySourceThe type of Power Source eg; Mains, SolarMainMainSolarSolarManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointElectrical ConduitsRepresents the feature class of electrical conduitsElectrical ConduitRepresents a continuous linear course of electrical conduit.TypeThe conduit type eg: Medium Duty, Heavy DutyMedium DutyMedium DutyHeavy DutyHeavy DutyMaterialThe conduit material typePVCPVCSizeThe conduit diameter1616mm2020mm2525mm3232mm4040mm5050mm6363mm8080mm100100mm125125mm150150mmProtectionThe type of conduit protection used eg: Concrete encased, rubber mat, tape onlyConcrete EncasedConcrete encasedRubber MatRubber MatTape OnlyTape OnlyGeometryThe geometry representing this feature in coordinate space.geometry_linear_multipath_complexLandscape AreasRepresents the feature class of landscape areasLandscape AreaRepresents a landscape area feature, such as a garden, shaped lawn, or landscape feature area.TypeThe type of Garden/L'scape Area eg: Garden, Grass, Rem VegetationGardenGardenGrassGrassGravelGravelEarthEarthRemnant VegetationRemnant VegetationRevegetationRevegetationSynthetic GrassSynthetic GrassEdge MaterialThe Edging Type/material eg. Concrete, Timber Sleeper, NoneNoneNoneConcreteConcreteSpade CutSpade CutTimberTimberAluminiumAluminiumBrickBrickPaverPaverPlasticPlasticRockRockRubberRubberRoot BarrierDoes Root Barrier exist - Yes or NobooleanGeometryThe geometry representing this feature in coordinate space.geometry_linear_multipath_complexTreesRepresents the feature class of treesTreeRepresents a tree feature. Trees may qualify as assets when planted as street trees, or when significant specimens are retained or planted as part of an open space development.SpeciesThe Tree SpeciesString_32GenusThe Tree GenusString_32Root BarrierDoes Root Barrier exist - Yes or NobooleanGrateDoes Tree Grate exist - Yes or NobooleanGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointSignsRepresents the feature class of signsSignRepresents a sign. May also be used for transport signsTypeThe type of Sign eg: Regulatory, Naming, Information The purpose of a sign. Applied to individual sign blades as blades may have different purposes in a compound sign.RegulatoryRegulating matters other than speed or parking. E.g council regulations, prohibited behavioursInformationProviding information of a historical, environmental or other topical nature.DirectionProviding directions, distances or maps to places of interestWarningProviding warning of hazardsNamingFeature or Street Name. Identifying a street, locality, park, building or facilityMaterialThe material type of sign eg: Timber, Steel/Aluminium, Carved stoneStainless SteelStainless SteelAluminiumAluminiumTimberTimberMasonryMasonrySteel GalvanisedSteel GalvanisedPlasticPlasticSteel Powder CoatedSteel Powder CoatedModel NumberThe standard code, model number or part number for this sign.stringSignTextSign TextstringRotationRotation angle (cartesian - anti-clockwise 0 degrees = East)May be used to denote direction of facing.float_directionGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepoint

&C&A&C&F&RPage &P

GCCC Site ImprovementsASSET ELEMENTDESCRIPTIONFEATUREDESCRIPTIONDETAILDESCRIPTIONENUMERATIONDESCRIPTIONENUMERATIONDESCRIPTIONPrepared SurfacesRepresents a Prepared Surface, Other than an activity area.Prepared SurfaceRepresents and Individual Prepared SurfaceFunctionAnnex SlabAnnex SlabHose Down PadHose Down PadVarious/OtherOtherRecreational (non-playing surface)Recreational - Not a Playing SurfaceStorageStorageMaterialBitumenBitumenConcreteConcreteExposed AggregateExposed AggregateGravelGravelOtherOtherSynthetic GrassSynthetic GrassPaversPaversLengthposativeintegerWidthposativeintegerAreaArea in metres SquaredposativeintegerGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointScoreboardsScoreboardMaterialMateial of scoreboard.AluminiumAluminiumConcreteConcretePlasticPlasticStainless SteelStainless SteelSteelSteelTimberTimberMasonryMasonryCombinationCombinationFinishThe finish applied to Material.PaintedPaintedPolishedPolishedPowdercoatedPowdercoatedGalvanisedGalvanisedStainedStainedPVC CoatingPVC CoatingLengthLength of scoreboard in metres.posativeintegerHeightHeight of scoreboard in metres.posativeintegerElectronicbooleanSupport Post MaterialMateial of scoreboard.AluminiumAluminiumConcreteConcretePlasticPlasticStainless SteelStainless SteelSteelSteelTimberTimberMasonryMasonryCombinationCombinationSupport Post FinishThe finish applied to Material.PaintedPaintedPolishedPolishedPowdercoatedPowdercoatedGalvanisedGalvanisedStainedStainedPVC CoatingPVC CoatingSupport Post HeightHeight of scoreboard in metres.posativeintegerSupport Post QuantityposativeintegerManufacturerThe Manufacturer of the unitString_32Model NumberThe standard code, model number or part number for the unitString_32GeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointArtifical Fauna HabitatsRepresents the feature class of artificial fauna habitats.Artifical Fauna HabitatsRepresents the artificial fauna habitat class, such as glider poles and ground hollows.TypeThe type of Habitat eg: glider pole and ground hollowGlider PoleGlider PoleGlider RopeGlider RopeGround HollowGround HollowLogLogNesting PlatformNesting PlatformRockRockMaterialThe material type of Fixture eg: Timber, AluminiumConcreteConcreteFibreglassFibreglassMasonryMasonryPlasticPlasticRockRockSteel GalvanisedSteel GalvanisedSteel Powder CoatedSteel Powder CoatedTimberTimberCombinationCombinationHeight_mThe height of the habitat in metresFloat_Posative_NonZeroPole MountedDoes Pole exist - Yes or NobooleanGeometryThe geometry representing this feature in coordinate space.geometry_area_multipatch_complexPlatformPlatformFunctionViewingViewingFishingFishingOtherOtherDeck MaterialTimberTimberPavedPavedConcreteConcreteSubstructure MaterialTimberTimberConcreteConcreteSteelSteelExternal Handrail MaterialTimberTimberMetalMetalNoneNoneExternal Handrail - LengthpositiveintegerExternal Balustrading MaterialMetalMetalMetal/Glass PanelMetal/Glass PanelWire CableWire CableTimberTimberMaximum HeightThe maximum distance between the deck and the ground in metres.positiveintegerLengthLength in meterspositiveintegerWidthWidth in meterspositiveintegerAreaArea in metres SquaredpositiveintegerGeometryThe geometry representing this feature in coordinate space.geometry_area_singlepatch_complexShelterShelterTypeThe type of structureSports ShelterSports ShelterInformationInformationBus ShelterBus ShelterPicnicPicnicCarportCarportStageStageSailSailArbourArbourConstructionTypeThe type of shelter constructed eg: Prefab or Built insituPrefabricatedPrefabricatedInsituInsituFloor MaterialThe material type of the Floor eg: Concrete, TimberBarkBarkConcreteConcreteEarthEarthPavedPavedRubberRubberSandSandSandstoneSandstoneBitumenBitumenExposed AggregateExposed AggregateGrassGrassGravelGravelTilesTilesTimberTimberWoodchipWoodchipWall MaterialThe material type of the Walls eg: Timber/cladding, Reinforced BlockNoneNoneAluminiumAluminiumBrickBrickConcrete BlockConcrete BlockSteelSteelConcreteConcreteCladdingCladdingGlassGlassMasonryMasonryStainless SteelStainless SteelInsulated Steel PanInsulated Steel PanelTimberTimberVinylVinylFinishThe finish applied to Material. This is the finish for the wall material.PaintedPaintedPolishedPolishedPowdercoatedPowdercoatedGalvanisedGalvanisedPlainPlainStainedStainedPVC CoatingPVC CoatingRoof MaterialThe material type of the Roof eg: Steel Sheeting, Masonry tilesMasonry TilesMasonry TilesSailSailMulti SailMulti SailConcreteConcretePlasticPlasticPerspexPerspexShinglesShinglesTimber and SteelTimber and SteelTinTinSteel SheetsSteel SheetsTimber slatsTimber slatsAreaArea in metres SquaredDisabled AccessGeometryThe geometry representing this feature in coordinate space.geometry_point_singlepointWater FeaturesRepresents the feature class of water featuresWater FeatureRepresents a feature of water featureTypeThe type of water featureFountainFountainPaddle WheelPaddle WheelWaterfallWaterfallOtherOtherFunctionThe function of water featureAir I