Q. What is the difference between $ & $$ in mapping or parameter file? In which cases they are generally used?

A. $ prefixes are used to denote session Parameter and variables and $$ prefixes are used to denote mapping parameters and variables

Q. What are Target Types on the Server?A. Target Types are File, Relational and ERP.

Q. What are Target Types on the Server?A. Target Types are File, Relational and ERP.

Q. How do you identify existing rows of data in the target table using lookup transformation?

A. There are two ways to lookup the target table to verify a row exists or not :1. Use connect dynamic cache lookup and then check the values of NewLookuprow Output port to decide whether the incoming record already exists in the table / cache or not.2. Use Unconnected lookup and call it from an expression transformation and check the Lookup condition port value (Null/ Not Null) to decide whether the incoming record already exists in the table or not.

Q. What are Aggregate transformations?

A. Aggregator transform is much like the Group by clause in traditional SQL.

This particular transform is a connected/active transform which can take the incoming data from the mapping pipeline and group them based on the group by ports specified and can caculated aggregate functions like ( avg, sum, count, stddev....etc) for each of those groups.

From a performance perspective if your mapping has an AGGREGATOR transform use filters and sorters very early in the pipeline if there is any need for them.

Q. What are various types of Aggregation?

A. Various types of aggregation are SUM, AVG, COUNT, MAX, MIN, FIRST, LAST, MEDIAN, PERCENTILE, STDDEV, and VARIANCE.

Q. What are Dimensions and various types of Dimension?A. Dimensions are classified to 3 types.

1. SCD TYPE 1(Slowly Changing Dimension): this contains current data.

2. SCD TYPE 2(Slowly Changing Dimension): this contains current data + complete historical data.

3. SCD TYPE 3(Slowly Changing Dimension): this contains current data.

Q. What are 2 modes of data movement in Informatica Server?

A. The data movement mode depends on whether Informatica Server should process single byte or multi-byte character data. This mode selection can affect the enforcement of code page relationships and code page validation in the Informatica Client and Server.

a) Unicode - IS allows 2 bytes for each character and uses additional byte for each non-ascii character (such as Japanese characters)

b) ASCII - IS holds all data in a single byte

The IS data movement mode can be changed in the Informatica Server configuration parameters. This comes into effect once you restart the Informatica Server.

Q. What is Code Page Compatibility?

A. Compatibility between code pages is used for accurate data movement when the Informatica Sever runs in the Unicode data movement mode. If the code pages are identical, then there will not be any data loss. One code page can be a subset or superset of another. For accurate data movement, the target code page must be a superset of the source code page.

Superset - A code page is a superset of another code page when it contains the character encoded in the other code page, it also contains additional characters not contained in the other code page.

Subset - A code page is a subset of another code page when all

characters in the code page are encoded in the other code page.What is Code Page used for?Code Page is used to identify characters that might be in different languages. If you are importing Japanese data into mapping, u must select the Japanese code page of source data.

Q. What is Router transformation? A. It is different from filter transformation in that we can specify multiple conditions and route the data to multiple targets depending on the condition.

Q. What is Load Manager? A. While running a Workflow, the PowerCenter Server uses the Load Manager process and the Data Transformation Manager Process (DTM) to run the workflow and carry out workflow tasks. When the PowerCenter Server runs a workflow, the Load Manager performs the following tasks: 1. Locks the workflow and reads workflow properties. 2. Reads the parameter file and expands workflow variables. 3. Creates the workflow log file. 4. Runs workflow tasks. 5. Distributes sessions to worker servers. 6. Starts the DTM to run sessions. 7. Runs sessions from master servers. 8. Sends post-session email if the DTM terminates abnormally. When the PowerCenter Server runs a session, the DTM performs the following tasks: 1. Fetches session and mapping metadata from the repository. 2. Creates and expands session variables. 3. Creates the session log file. 4. Validates session code pages if data code page validation is enabled. Checks query conversions if data code page validation is disabled. 5. Verifies connection object permissions. 6. Runs pre-session shell commands. 7. Runs pre-session stored procedures and SQL. 8. Creates and runs mappings, reader, writer, and transformation threads to extract, transform, and load data. 9. Runs post-session stored procedures and SQL.

10. Runs post-session shell commands. 11. Sends post-session email.

Q. What is Data Transformation Manager?A. After the load manager performs validations for the session, it creates the DTM process. The DTM process is the second process associated with the session run. The primary purpose of the DTM process is to create and manage threads that carry out the session tasks.

• The DTM allocates process memory for the session and divide it into buffers. This is also known as buffer memory. It creates the main thread, which is called the master thread. The master thread creates and manages all other threads.• If we partition a session, the DTM creates a set of threads for each partition to allow concurrent processing.. When Informatica server writes messages to the session log it includes thread type and thread ID.

Following are the types of threads that DTM creates:

Master Thread - Main thread of the DTM process. Creates and manages all other threads.

Mapping Thread - One Thread to Each Session. Fetches Session and Mapping Information.

Pre and Post Session Thread - One Thread each to Perform Pre and Post Session Operations.

Reader Thread - One Thread for Each Partition for Each Source Pipeline.

Writer Thread - One Thread for Each Partition if target exist in the source pipeline write to the target.

Transformation Thread - One or More Transformation Thread For Each Partition.

Q. What is Session and Batches?

A. Session - A Session Is A set of instructions that tells the Informatica Server How And When To Move Data From Sources To

Targets. After creating the session, we can use either the server manager or the command line program pmcmd to start or stop the session. Batches - It Provides A Way to Group Sessions For Either Serial Or Parallel Execution By The Informatica Server. There Are Two Types Of Batches :

1. Sequential - Run Session One after the Other.

2. Concurrent - Run Session At The Same Time.

Q. What is a source qualifier?A. It represents all data queried from the source.

Q. Why we use lookup transformations?

A. Lookup Transformations can access data from relational tables that are not sources in mapping. With Lookup transformation, we can accomplish the following tasks:

Get a related value-Get the Employee Name from Employee table based on the Employee ID

Perform Calculation.

Update slowly changing dimension tables - We can use unconnected lookup transformation to determine whether the records already exist in the target or not.

Q. While importing the relational source definition from database, what are the meta data of source U import?Source name Database location Column names Data types Key constraints

Q. How many ways you can update a relational source definition and what are they? A. Two ways 1. Edit the definition 2. Reimport the definition

Q. Where should you place the flat file to import the flat file

definition to the designer? A. Place it in local folder

Q. Which transformation should u need while using the Cobol sources as source definitions? A. Normalizer transformation which is used to normalize the data. Since Cobol sources r often consists of denormalized data.

Q. How can you create or import flat file definition in to the warehouse designer?A. You can create flat file definition in warehouse designer. In the warehouse designer, you can create a new target: select the type as flat file. Save it and u can enter various columns for that created target by editing its properties. Once the target is created, save it. You can import it from the mapping designer.

Q. What is a mapplet?A. A mapplet should have a mapplet input transformation which receives input values, and an output transformation which passes the final modified data to back to the mapping. Set of transformations where the logic can be reusable when the mapplet is displayed within the mapping only input & output ports are displayed so that the internal logic is hidden from end-user point of view.

Q. What is a transformation?A. It is a repository object that generates, modifies or passes data.

Q. What are the designer tools for creating transformations? A. Mapping designer Transformation developer Mapplet designer

Q. What are connected and unconnected transformations?

A. Connect Transformation : A transformation which participates in the mapping data flow. Connected transformation can receive multiple inputs and provides multiple outputs

Unconnected: An unconnected transformation does not participate in the mapping data flow. It can receive multiple inputs and provides single output

Q. In how many ways can you create ports?A. Two ways1. Drag the port from another transformation2. Click the add button on the ports tab.

Q. What are reusable transformations?A. A transformation that can be reused is called a reusable transformation They can be created using two methods:1. Using transformation developer

2. Create normal one and promote it to reusableQ. What are mapping parameters and mapping variables? A. Mapping parameter represents a constant value that U can define before running a session. A mapping parameter retains the same value throughout the entire session. When u use the mapping parameter ,U declare and use the parameter in a mapping or mapplet. Then define the value of parameter in a parameter file for the session. Unlike a mapping parameter, a mapping variable represents a value that can change throughout the session. The Informatica server saves the value of mapping variable to the repository at the end of session run and uses that value next time U run the session.

Q. Can U use the mapping parameters or variables created in one mapping into another mapping?A. NO. We can use mapping parameters or variables in any transformation of the same mapping or mapplet in which U have created mapping parameters or variables.

Q. How can U improve session performance in aggregator transformation?

A. 1. Use sorted input. Use a sorter before the aggregator

2. Do not forget to check the option on the aggregator that tells the aggregator that the input is sorted on the same keys as group by. The key order is also very important.

Q. Is aggregate cache in aggregator transformation? A. The aggregator stores data in the aggregate cache until it completes aggregate calculations. When u run a session that uses an aggregator transformation, the Informatica server creates index and data caches in memory to process the transformation. If the Informatica server requires more space, it stores overflow values in cache files.

Q. What r the difference between joiner transformation and source qualifier transformation? A. You can join heterogeneous data sources in joiner transformation which we cannot achieve in source qualifier transformation. You need matching keys to join two relational sources in source qualifier transformation. Whereas u doesn’t need matching keys to join two sources. Two relational sources should come from same data source in sourcequalifier. You can join relational sources which r coming from different sources also.

Q. In which conditions can we not use joiner transformations?A. You cannot use a Joiner transformation in the following situations (according to Informatica 7.1):♦Either input pipeline contains an Update Strategy transformation.♦You connect a Sequence Generator transformation directly before the Joinertransformation.

Q. What r the settings that u use to configure the joiner transformation? A. Master and detail source Type of join Condition of the join

Q. What are the join types in joiner transformation?A. Normal (Default) -- only matching rows from both master and detailMaster outer -- all detail rows and only matching rows

from masterDetail outer -- all master rows and only matching rows from detailFull outer -- all rows from both master and detail ( matching or non matching)

Q. What are the joiner caches? A. When a Joiner transformation occurs in a session, the Informatica Server reads all the records from the master source and builds index and data caches based on the master rows. After building the caches, the Joiner transformation reads records from the detail source and performs joins.

Q. Why use the lookup transformation? A. To perform the following tasks. Get a related value. For example, if your source table includes employee ID, but you want to include the employee name in your target table to make your summary data easier to read. Perform a calculation. Many normalized tables include values used in a calculation, such as gross sales per invoice or sales tax, but not the calculated value (such as net sales). Update slowly changing dimension tables. You can use a Lookup transformation to determine whether records already exist in the target.

Q. What is meant by lookup caches? A. The Informatica server builds a cache in memory when it processes the first row of a data in a cached look up transformation. It allocates memory for the cache based on the amount u configure in the transformation or session properties. The Informatica server stores condition values in the index cache and output values in

the data cache.

Q. What r the types of lookup caches? A. Persistent cache: U can save the lookup cache files and reuse them the next time the Informatica server processes a lookup transformation configured to use the cache.

Recache from database: If the persistent cache is not synchronized with the lookup table, you can configure the lookup transformation to rebuild the lookup cache.

Static cache: U can configure a static or read-only cache for only lookup table. By default Informatica server creates a static cache. It caches the lookup table and lookup values in the cache for each row that comes into the transformation. When the lookup condition is true, the Informatica server does not update the cache while it processes the lookup transformation.

Dynamic cache: If you want to cache the target table and insert new rows into cache and the target, you can create a look up transformation to use dynamic cache. The Informatica server dynamically inserts data to the target table.

Shared cache: U can share the lookup cache between multiple transactions. You can share unnamed cache between transformations in the same mapping.

Q. What r the types of lookup caches? A. Persistent cache: U can save the lookup cache files and reuse them the next time the Informatica server processes a lookup transformation configured to use the cache.

Recache from database: If the persistent cache is not synchronized with the lookup table, you can configure the lookup transformation to rebuild the lookup cache.

Static cache: U can configure a static or read-only cache for only lookup table. By default Informatica server creates a static cache. It caches the lookup table and

lookup values in the cache for each row that comes into the transformation. When the lookup condition is true, the Informatica server does not update the cache while it processes the lookup transformation.

Dynamic cache: If you want to cache the target table and insert new rows into cache and the target, you can create a look up transformation to use dynamic cache. The Informatica server dynamically inserts data to the target table.

Shared cache: U can share the lookup cache between multiple transactions. You can share unnamed cache between transformations in the same mapping.

Q: What do you know about Informatica and ETL?A: Informatica is a very useful GUI based ETL tool.

Q: FULL and DELTA files. Historical and Ongoing load.A: FULL file contains complete data as of today including history data, DELTA file contains only the changes since last extract.

Q: Power Center/ Power Mart – which products have you worked with?A: Power Center will have Global and Local repository, whereas Power Mart will have only Local repository.

Q: Explain what are the tools you have used in Power Center and/or Power Mart?A: Designer, Server Manager, and Repository Manager.

Q: What is a Mapping?A: Mapping Represent the data flow between source and target

Q: What are the components must contain in Mapping?A: Source definition, Transformation, Target Definition and Connectors

Q: What is Transformation?A: Transformation is a repository object that generates, modifies, or passes data. Transformation performs specific function. They are two types of transformations:

1. Active

Rows, which are affected during the transformation or can change the no of rows that pass through it. Eg: Aggregator, Filter, Joiner, Normalizer, Rank, Router, Source qualifier, Update Strategy, ERP Source Qualifier, Advance External Procedure.

2. PassiveDoes not change the number of rows that pass through it. Eg: Expression, External Procedure, Input, Lookup, Stored Procedure, Output, Sequence Generator, XML Source Qualifier.

Q: Which transformation can be overridden at the Server?A: Source Qualifier and Lookup Transformations

Q: What is connected and unconnected Transformation and give Examples?

Q: What are Options/Type to run a Stored Procedure?A:

Normal: During a session, the stored procedure runs where the transformation exists in the mapping on a row-by-row basis. This is useful for calling the stored procedure for each row of data that passes through the mapping, such as running a calculation against an input port. Connected stored procedures run only in normal mode.

Pre-load of the Source. Before the session retrieves data from the source, the stored procedure runs. This is useful for verifying the existence of tables or performing joins of data in a temporary table.

Post-load of the Source. After the session retrieves data from the source, the stored procedure runs. This is useful for removing temporary tables.

Pre-load of the Target. Before the session sends data to the target, the stored procedure runs. This is useful for verifying target tables or disk space on the target system.

Post-load of the Target. After the session sends data to the target, the stored procedure runs. This is useful for re-creating indexes on the database.

It must contain at least one Input and one Output port.

Q: What kinds of sources and of targets can be used in Informatica?A:

Sources may be Flat file, relational db or XML. Target may be relational tables, XML or flat files.

Q: Transformations: What are the different transformations you have worked with?A:

Source Qualifier (XML, ERP, MQ) Joiner Expression Lookup Filter Router Sequence Generator Aggregator Update Strategy Stored Proc External Proc Advanced External Proc Rank Normalizer

Q: What are active/passive transformations?

A: Passive transformations do not change the nos. of rows passing through it whereas active transformation changes the nos. rows passing thru it.Active: Filter, Aggregator, Rank, Joiner, Source QualifierPassive: Expression, Lookup, Stored Proc, Seq. Generator

Q: What are connected/unconnected transformations?A:

Connected transformations are part of the mapping pipeline. The input and output ports are connected to other transformations.

Unconnected transformations are not part of the mapping pipeline. They are not linked in the map with any input or output ports. Eg. In Unconnected Lookup you can pass multiple values to unconnected transformation but only one column of data will be returned from the transformation. Unconnected: Lookup, Stored Proc.

Q: In target load ordering, what do you order - Targets or Source Qualifiers?

A: Source Qualifiers. If there are multiple targets in the mapping, which are populated from multiple sources, then we can use Target Load ordering.

Q: Have you used constraint-based load ordering? Where do you set this?A: Constraint based loading can be used when you have multiple targets in the mapping and the target tables have a PK-FK relationship in the database. It can be set in the session properties. You have to set the Source “Treat Rows as: INSERT” and check the box “Constraint based load ordering” in Advanced Tab.

Q: If you have a FULL file that you have to match and load into a corresponding table, how will you go about it? Will you use Joiner transformation?A: Use Joiner and join the file and Source Qualifier.

Q: If you have 2 files to join, which file will you use as the master file?A: Use the file with lesser nos. of records as master file.

Q: If a sequence generator (with increment of 1) is connected to (say) 3 targets and each target uses the NEXTVAL port, what value will each target get?A: Each target will get the value in multiple of 3.

Q: Have you used the Abort, Decode functions?A: Abort can be used to Abort / stop the session on an error condition. If the primary key column contains NULL, and you need to stop the session from continuing then you may use ABORT function in the default value for the port. It can be used with IIF and DECODE function to Abort the session.

Q: Have you used SQL Override?A: It is used to override the default SQL generated in the Source Qualifier / Lookup transformation.

Q: If you make a local transformation reusable by mistake, can you undo the reusable action?A: No

Q: What is the difference between filter and router transformations?A: Filter can filter the records based on ONE condition only whereas Router can be used to filter records on multiple condition.

Q: Lookup transformations: Cached/un-cachedA: When the Lookup Transformation is cached the Informatica Server caches the data and index. This is done at the beginning of the session before reading the first record from the source. If the Lookup is uncached then the Informatica reads the data from the database for every record coming from the Source Qualifier.

Q: Connected/unconnected – if there is no match for the lookup, what is returned?A: Unconnected Lookup returns NULL if there is no matching record found in the Lookup transformation.

Q: What is persistent cache?A: When the Lookup is configured to be a persistent cache Informatica server does not delete the cache files after completion of the session. In the next run Informatica server uses the cache file from the previous session.

Q: What is dynamic lookup strategy?A: The Informatica server compares the data in the lookup table and the cache, if there is no matching record found in the cache file then it modifies the cache files by inserting the record. You may use only (=) equality in the lookup condition. If multiple matches are found in the lookup then Informatica fails the session. By default the Informatica server creates a static cache.

Q: Mapplets: What are the 2 transformations used only in mapplets?A: Mapplet Input / Source Qualifier, Mapplet Output

Q: Have you used Shortcuts?A: Shortcuts may used to refer to another mapping. Informatica refers to the original mapping. If any changes are made to the mapping / mapplet, it is immediately reflected in the mapping where it is used.

Q: If you used a database when importing sources/targets that was dropped later on, will your mappings still be valid?A: No

Q: In expression transformation, how can you store a value from the previous row?A: By creating a variable in the transformation.

Q: How does Informatica do variable initialization? Number/String/DateA: Number – 0, String – blank, Date – 1/1/1753

Q: Have you used the Informatica debugger?A: Debugger is used to test the mapping during development. You can give breakpoints in the mappings and analyze the data.

Q: What do you know about the Informatica server architecture? Load Manager, DTM, Reader, Writer, Transformer.A:

Load Manager is the first process started when the session runs. It checks for validity of mappings, locks sessions and other objects.

DTM process is started once the Load Manager has completed its job. It starts a thread for each pipeline.

Reader scans data from the specified sources. Writer manages the target/output data. Transformer performs the task specified in the mapping.

Q: Have you used partitioning in sessions? (not available with Powermart)A: It is available in PowerCenter. It can be configured in the session properties.

Q: Have you used External loader? What is the difference between normal and bulk loading?A: External loader will perform direct data load to the table/data files, bypass the SQL layer and will not log the data. During normal data load, data passes through SQL layer, data is logged in to the archive log file and as a result it is slow.

Q: Do you enable/disable decimal arithmetic in session properties?A: Disabling Decimal Arithmetic will improve the session performance but it converts numeric values to double, thus leading to reduced accuracy.

Q: When would use multiple update strategy in a mapping?A: When you would like to insert and update the records in a Type 2 Dimension table.

Q: When would you truncate the target before running the session?A: When we want to load entire data set including history in one shot. Update strategy do not have dd_update, dd_delete and it does only dd_insert.

Q: How do you use stored proc transformation in the mapping?A: In side mapping we can use stored procedure transformation, pass input parameters and get back the output parameters. When handling through session, it can be invoked either in Pre-session or post-session scripts.

Q: What did you do in the stored procedure? Why did you use stored proc instead of using expression?A:

Q: When would you use SQ, Joiner and Lookup?A:

If we are using multiples source tables and they are related at the database, then we can use a single SQ.

If we need to Lookup values in a table or Update Slowly Changing Dimension tables then we can use Lookup transformation.

Joiner is used to join heterogeneous sources, e.g. Flat file and relational tables.

Q: How do you create a batch load? What are the different types of batches?A: Batch is created in the Server Manager. It contains multiple sessions. First create sessions and then create a batch. Drag the sessions into the batch from the session list window. Batches may be sequential or concurrent. Sequential batch runs the sessions sequentially. Concurrent sessions run parallel thus optimizing the server resources.

Q: How did you handle reject data? What file does Informatica create for bad data?A: Informatica saves the rejected data in a .bad file. Informatica adds a row identifier for each record rejected indicating whether the row was rejected because of Writer or Target. Additionally for every column there is an indicator for each column specifying whether the data was rejected due to overflow, null, truncation, etc.

Q: How did you handle runtime errors? If the session stops abnormally how were you managing the reload process?

Q: Have you used pmcmd command? What can you do using this command?A: pmcmd is a command line program. Using this command

You can start sessions Stop sessions

Recover session

Q: What are the two default repository user groupsA: Administrators and Public

Q: What are the Privileges of Default Repository and Extended Repository user?A:

Default Repository Privileges o Use Designero Browse Repositoryo Create Session and Batches

Extended Repository Privilegeso Session Operatoro Administer Repositoryo Administer Servero Super User

Q: How many different locks are available for repository objectsA: There are five kinds of locks available on repository objects:

Read lock. Created when you open a repository object in a folder for which you do not have write permission. Also created when you open an object with an existing write lock.

Write lock. Created when you create or edit a repository object in a folder for which you have write permission.

Execute lock. Created when you start a session or batch, or when the Informatica Server starts a scheduled session or batch.

Fetch lock. Created when the repository reads information about repository objects from the database.

Save lock. Created when you save information to the repository.

Q: What is Session Process?A: The Load Manager process. Starts the session, creates the DTM process, and sends post-session email when the session completes.

Q: What is DTM process?A: The DTM process creates threads to initialize the session, read, write, transform data, and handle pre and post-session operations.

Q: When the Informatica Server runs a session, what are the tasks handled?A:

Load Manager (LM):

o LM locks the session and reads session properties. o LM reads the parameter file. o LM expands the server and session variables and

parameters. o LM verifies permissions and privileges. o LM validates source and target code pages. o LM creates the session log file. o LM creates the DTM (Data Transformation Manager)

process.

Data Transformation Manager (DTM):o DTM process allocates DTM process memory. o DTM initializes the session and fetches the mapping. o DTM executes pre-session commands and procedures. o DTM creates reader, transformation, and writer threads for

each source pipeline. If the pipeline is partitioned, it creates a set of threads for each partition.

o DTM executes post-session commands and procedures. o DTM writes historical incremental aggregation and lookup

data to disk, and it writes persisted sequence values and mapping variables to the repository.

o Load Manager sends post-session email

Q: What is Code Page?A: A code page contains the encoding to specify characters in a set of one or more languages.

Q: How to handle the performance in the server side?A: Informatica tool has no role to play here. The server administrator will take up the issue.

Q: What are the DTM (Data Transformation Manager) Parameters?A:

DTM Memory parameter - Default buffer block size/Data & Index Cache size ,

Reader Parameter - Line Sequential buffer length for flat files, General Parameter - Commit Interval (source and Target)/

Others- Enabling Lookup cache, Event based Scheduling - Indicator file to wait for.

1. Explain about your projects– Architecture– Dimension and Fact tables– Sources and Targets

– Transformations used– Frequency of populating data– Database size

2. What is dimension modeling?Unlike ER model the dimensional model is very asymmetric with one large central table called as fact table connected to multiple dimension tables .It is also called star schema.

3. What are mapplets?Mapplets are reusable objects that represents collection of transformationsTransformations not to be included in mapplets areCobol source definitionsJoiner transformationsNormalizer TransformationsNon-reusable sequence generator transformationsPre or post session proceduresTarget definitionsXML Source definitionsIBM MQ source definitionsPower mart 3.5 style Lookup functions

4. What are the transformations that use cache for performance?Aggregator, Lookups, Joiner and Ranker

5. What the active and passive transformations?An active transformation changes the number of rows that pass through the mapping.1. Source Qualifier2. Filter transformation3. Router transformation4. Ranker5. Update strategy6. Aggregator 7. Advanced External procedure8. Normalizer9. Joiner

Passive transformations do not change the number of rows that pass through the mapping.1. Expressions2. Lookup3. Stored procedure4. External procedure

5. Sequence generator6. XML Source qualifier

6. What is a lookup transformation?Used to look up data in a relational table, views, or synonym, The informatica server queries the lookup table based on the lookup ports in the transformation. It compares lookup transformation port values to lookup table column values based on the lookup condition. The result is passed to other transformations and the target.

Used to :Get related valuePerform a calculation Update slowly changing dimension tables.Diff between connected and unconnected lookups. Which is better?Connected :Received input values directly from the pipelineCan use Dynamic or static cache.Cache includes all lookup columns used in the mappingCan return multiple columns from the same rowIf there is no match , can return default values Default values can be specified.Un connected :Receive input values from the result of a LKP expression in another transformation.Only static cache can be used.Cache includes all lookup/output ports in the lookup condition and lookup or return port.Can return only one column from each row.If there is no match it returns null.Default values cannot be specified.

Explain various caches :Static:Caches the lookup table before executing the transformation. Rows are not added dynamically.Dynamic:Caches the rows as and when it is passed.Unshared:Within the mapping if the lookup table is used in more than one transformation then the cache built for the first lookup can be used for the others. It cannot be used across mappings.Shared:If the lookup table is used in more than one transformation/mapping

then the cache built for the first lookup can be used for the others. It can be used across mappings.Persistent :If the cache generated for a Lookup needs to be preserved for subsequent use then persistent cache is used. It will not delete the index and data files. It is useful only if the lookup table remains constant.

What are the uses of index and data caches? The conditions are stored in index cache and records from the lookup are stored in data cache

7. Explain aggregate transformation?The aggregate transformation allows you to perform aggregate calculations, such as averages, sum, max, min etc. The aggregate transformation is unlike the Expression transformation, in that you can use the aggregator transformation to perform calculations in groups. The expression transformation permits you to perform calculations on a row-by-row basis only.Performance issues ? The Informatica server performs calculations as it reads and stores necessary data group and row data in an aggregate cache. Create Sorted input ports and pass the input records to aggregator in sorted forms by groups then by port

Incremental aggregation? In the Session property tag there is an option for performing incremental aggregation. When the Informatica server performs incremental aggregation , it passes new source data through the mapping and uses historical cache (index and data cache) data to perform new aggregation calculations incrementally.

What are the uses of index and data cache?The group data is stored in index files and Row data stored in data files.

8. Explain update strategy?Update strategy defines the sources to be flagged for insert, update, delete, and reject at the targets.What are update strategy constants?DD_INSERT,0 DD_UPDATE,1 DD_DELETE,2 DD_REJECT,3

If DD_UPDATE is defined in update strategy and Treat source rows as INSERT in Session . What happens? Hints: If in Session anything other than DATA DRIVEN is mentions

then Update strategy in the mapping is ignored.

What are the three areas where the rows can be flagged for particular treatment? In mapping, In Session treat Source Rows and In Session Target Options.

What is the use of Forward/Reject rows in Mapping?

9. Explain the expression transformation ?Expression transformation is used to calculate values in a single row before writing to the target.What are the default values for variables?Hints: Straing = Null, Number = 0, Date = 1/1/1753

10. Difference between Router and filter transformation?In filter transformation the records are filtered based on the condition and rejected rows are discarded. In Router the multiple conditions are placed and the rejected rows can be assigned to a port.

How many ways you can filter the records?1. Source Qualifier2. Filter transformation3. Router transformation4. Ranker5. Update strategy.

11.How do you call stored procedure and external procedure transformation ?External Procedure can be called in the Pre-session and post session tag in the Session property sheet.Store procedures are to be called in the mapping designer by three methods1. Select the icon and add a Stored procedure transformation2. Select transformation – Import Stored Procedure3. Select Transformation – Create and then select stored procedure.

12. Explain Joiner transformation and where it is used?While a Source qualifier transformation can join data originating from a common source database, the joiner transformation joins two related heterogeneous sources residing in different locations or file systems.Two relational tables existing in separate databasesTwo flat files in different file systems.

Two different ODBC sourcesIn one transformation how many sources can be coupled?Two sources can be couples. If more than two is to be couples add another Joiner in the hierarchy.What are join options?Normal (Default)Master OuterDetail OuterFull Outer

13. Explain Normalizer transformation?The normaliser transformation normalises records from COBOL and relational sources, allowing you to organise the data according to your own needs. A Normaliser transformation can appear anywhere in a data flow when you normalize a relational source. Use a Normaliser transformation instead of the Source Qualifier transformation when you normalize COBOL source. When you drag a COBOL source into the Mapping Designer Workspace, the Normaliser transformation appears, creating input and output ports for every columns in the source.

14.What is Source qualifier transformation?When you add relational or flat file source definition to a mapping , you need to connect to a source Qualifier transformation. The source qualifier represents the records that the informatica server reads when it runs a session.Join Data originating from the same source database.Filter records when the Informatica server reads the source data.Specify an outer join rather than the default inner join.Specify sorted ports Select only distinct values from the sourceCreate a custom query to issue a special SELECT statement for the Informatica server to read the source data.

15.What is Ranker transformation?Filters the required number of records from the top or from the bottom.

16.What is target load option?It defines the order in which informatica server loads the data into the targets.This is to avoid integrity constraint violations

17. How do you identify the bottlenecks in Mappings?Bottlenecks can occur in 1. Targets The most common performance bottleneck occurs when the informatica server writes to a target database. You can identify target bottleneck by configuring the session to write to a flat file target. If the session performance increases significantly when you write to a flat file, you have a target bottleneck. Solution : Drop or Disable index or constraints Perform bulk load (Ignores Database log) Increase commit interval (Recovery is compromised) Tune the database for RBS, Dynamic Extension etc.,

2. Sources Set a filter transformation after each SQ and see the records are not through. If the time taken is same then there is a problem. You can also identify the Source problem by Read Test Session – where we copy the mapping with sources, SQ and remove all transformations and connect to file target. If the performance is same then there is a Source bottleneck. Using database query – Copy the read query directly from the log. Execute the query against the source database with a query tool. If the time it takes to execute the query and the time to fetch the first row are significantly different, then the query can be modified using optimizer hints. Solutions: Optimize Queries using hints. Use indexes wherever possible.

3. Mapping If both Source and target are OK then problem could be in mapping. Add a filter transformation before target and if the time is the same then there is a problem. (OR) Look for the performance monitor in the Sessions property sheet and view the counters.Solutions: If High error rows and rows in lookup cache indicate a mapping bottleneck. Optimize Single Pass Reading:

Optimize Lookup transformation : 1. Caching the lookup table: When caching is enabled the informatica server caches the lookup table and queries the cache during the session. When this option is not enabled the server queries the lookup table on a row-by row basis. Static, Dynamic, Shared, Un-shared and Persistent cache 2. Optimizing the lookup condition Whenever multiple conditions are placed, the condition with equality sign should take precedence. 3. Indexing the lookup table The cached lookup table should be indexed on order by columns. The session log contains the ORDER BY statement The un-cached lookup since the server issues a SELECT statement for each row passing into lookup transformation, it is better to index the lookup table on the columns in the condition

Optimize Filter transformation: You can improve the efficiency by filtering early in the data flow. Instead of using a filter transformation halfway through the mapping to remove a sizable amount of data. Use a source qualifier filter to remove those same rows at the source, If not possible to move the filter into SQ, move the filter transformation as close to the source qualifier as possible to remove unnecessary data early in the data flow. Optimize Aggregate transformation: 1. Group by simpler columns. Preferably numeric columns. 2. Use Sorted input. The sorted input decreases the use of aggregate caches. The server assumes all input data are sorted and as it reads it performs aggregate calculations. 3. Use incremental aggregation in session property sheet. Optimize Seq. Generator transformation: 1. Try creating a reusable Seq. Generator transformation and use it in multiple mappings 2. The number of cached value property determines the number of values the informatica

server caches at one time. Optimize Expression transformation: 1. Factoring out common logic 2. Minimize aggregate function calls. 3. Replace common sub-expressions with local variables. 4. Use operators instead of functions.

4. Sessions If you do not have a source, target, or mapping bottleneck, you may have a session bottleneck. You can identify a session bottleneck by using the performance details. The informatica server creates performance details when you enable Collect Performance Data on the General Tab of the session properties. Performance details display information about each Source Qualifier, target definitions, and individual transformation. All transformations have some basic counters that indicate the Number of input rows, output rows, and error rows. Any value other than zero in the readfromdisk and writetodisk counters for Aggregate, Joiner, or Rank transformations indicate a session bottleneck. Low bufferInput_efficiency and BufferOutput_efficiency counter also indicate a session bottleneck. Small cache size, low buffer memory, and small commit intervals can cause session bottlenecks.5. System (Networks)

18.How to improve the Session performance?1 Run concurrent sessions2 Partition session (Power center)3. Tune Parameter – DTM buffer pool, Buffer block size, Index cache size, data cache size, Commit Interval, Tracing level (Normal, Terse, Verbose Init, Verbose Data) The session has memory to hold 83 sources and targets. If it is more, then DTM can be increased. The informatica server uses the index and data caches for Aggregate, Rank, Lookup and Joiner transformation. The server stores the transformed data from the above transformation in the data cache before returning it to the data flow. It stores group information for those transformations in index cache. If the allocated data or index cache is not large enough to store the

date, the server stores the data in a temporary disk file as it processes the session data. Each time the server pages to the disk the performance slows. This can be seen from the counters . Since generally data cache is larger than the index cache, it has to be more than the index.4. Remove Staging area5. Tune off Session recovery6. Reduce error tracing

19. What are tracing levels?Normal-defaultLogs initialization and status information, errors encountered, skipped rows due to transformation errors, summarizes session results but not at the row level.TerseLog initialization, error messages, notification of rejected data.Verbose Init.In addition to normal tracing levels, it also logs additional initialization information, names of index and data files used and detailed transformation statistics.Verbose Data.In addition to Verbose init, It records row level logs.

20. What is Slowly changing dimensions?Slowly changing dimensions are dimension tables that have slowly increasing data as well as updates to existing data.

21.What are mapping parameters and variables?A mapping parameter is a user definable constant that takes up a value before running a session. It can be used in SQ expressions, Expression transformation etc.Steps:Define the parameter in the mapping designer - parameter & variables .Use the parameter in the Expressions.Define the values for the parameter in the parameter file.

A mapping variable is also defined similar to the parameter except that the value of the variable is subjected to change.It picks up the value in the following order.1. From the Session parameter file2. As stored in the repository object in the previous run.3. As defined in the initial values in the designer.4. Default values

Q. What are the output files that the Informatica server creates during the session running?Informatica server log: Informatica server (on UNIX) creates a log for all status and error messages (default name: pm.server.log). It also creates an error log for error messages. These files will be created in Informatica home directorySession log file: Informatica server creates session log file for each session. It writes information about session into log files such as initialization process, creation of sql commands for reader and writer threads, errors encountered and load summary. The amount of detail in session log file depends on the tracing level that you set.Session detail file: This file contains load statistics for each target in mapping. Session detail includes information such as table name, number of rows written or rejected. You can view this file by double clicking on the session in monitor window.Performance detail file: This file contains information known as session performance details which helps you where performance can be improved. To generate this file select the performance detail option in the session property sheet.Reject file: This file contains the rows of data that the writer does not write to targets.Control file: Informatica server creates control file and a target file when you run a session that uses the external loader. The control file contains the information about the target flat file such as data format and loading instructions for the external loader.Post session email: Post session email allows you to automatically communicate information about a session run to designated recipients. You can create two different messages. One if the session completed successfully the other if the session fails.Indicator file: If you use the flat file as a target, you can configure the Informatica server to create indicator file. For each target row, the indicator file contains a number to indicate whether the row was marked for insert, update, delete or reject.Output file: If session writes to a target file, the Informatica server creates the target file based on file properties entered in the session property sheet.Cache files: When the Informatica server creates memory cache it also creates cache files.

For the following circumstances Informatica server creates index and data cache files:Aggregator transformationJoiner transformationRank transformationLookup transformation

Q. What is the difference between joiner transformation and source qualifier transformation?A. You can join heterogeneous data sources in joiner transformation which we cannot do in source qualifier transformation.

Q. What is meant by lookup caches?A. The Informatica server builds a cache in memory when it processes the first row of a data in a cached look up transformation. It allocates memory for the cache based on the amount you configure in the transformation or session properties. The Informatica server stores condition values in the index cache and output values in the data cache.

Q. What is meant by parameters and variables in Informatica and how it is used?A. Parameter: A mapping parameter represents a constant value that you can define before running a session. A mapping parameter retains the same value throughout the entire session.Variable: A mapping variable represents a value that can change through the session. Informatica Server saves the value of a mapping variable to the repository at the end of each successful session run and uses that value the next time you run the session

Q. What is target load order?You specify the target load order based on source qualifiers in a mapping. If you have multiple source qualifiers connected to multiple targets, you can define the order in which Informatica server loads data into the targets