INDUSTRIAL QUALITY 325 - elecspess.com.au · CH 2011 ... pullers with locking features which clamp...
Transcript of INDUSTRIAL QUALITY 325 - elecspess.com.au · CH 2011 ... pullers with locking features which clamp...
www.tridon.com.au
available FEBRUARY - MARCH 2011
l Complete with bearing separator, main rods, extension rods, twin/triple head, beam and legs to build 4”, 6”, 8” two and three leg pullersl For general, industrial, automotive, agricultural and marine applicationsl 10-tonne hydraulic ram
Hydraulic Gear Puller Kit
$325.00Part No. 265000
Ex GST $295.45
l High pressure or high volumel Variable stroke pistol gripl With 300mm (12”) flexible hose and 4 jaw couplerl Cartridge capacity: 450gl Bulk capacity: 650cm³l Output: Delivers 0.84g per strokel Pressure: 7,000 PSI (480 Bar)l Thread: 1/8” BSPT
INDUSTRIALQUALITY
Professional PistolGrease Gun
$89.50Part No. 305385
Ex GST $81.36
Diagonal Cuttersl Cutting face flush groundl Non-bevelled, for flush cutting sprues off plastic components or soft materials such as leadl Vanadium electric steel l Oil-hardened and temperedl Length: 160mm
$52.95Part No. 72 01 160
Ex GST $48.14
l Heavy duty stainless blades and toolsl 16 functionsl With nylon pouch
CombinationArmy Knife
$59.95Part No. NATO1S
Ex GST $54.50
l Hardened chrome vanadium steell 2, 3, 4, 5, 6, 8 and 10mm pin punchesl Resists high working stressl Long service lifel Length: 150mml Made in Germany
Parallel Pin Punch Set 7 piece
$49.50Part No. RPPS7
Ex GST $45.00
l Safest, easiest and most versatile option in the Australian market.l Multi-application tool performs the work of three standard belt stretching units.
Safety Instructions:
• Always refer to the vehicle manufacturers specifications
• Always wear appropriate safety clothing
• For best practice it is suggested that spark plugs (petrol engines) or heater plugs (diesel engines) be removed from the engine to relieve the compression pressure so aiding belt fitting
• Always turn the engine in the engines normal direction of rotation
• Take care not to trap fingers between pulleys and belt
Flexible Drive Belt Stretcher
Pt. No:07740000
Component part identification:
• Main body
• Leading pin
• Trailing pin
• Lock screw
• Roll pin
Instructions for use: NB: flexible auxiliary drive belts are not designed to be refitted after removal. Always fit a new belt.
1. Place the 07740000 on to the crankshaft pulley and adjust the leading pin so that the tooth sits in the first or second groove of the pulley
2. Tighten the leading pin lock screw (careful not to strip the threads in the alloy body)
3. Fit the new belt around all the pulleys and half way around crankshaft pulley as shown (NB: observe manufacturers direction of rotation, shown in yellow in example shown)
4. Fit 07740000 so leading pin is trapped against the pulley by the belt
5. Using appropriate socket and ratchet turn the crankshaft in the manufacturers recommended DOR.
pic. 1
pic. 2 Special note: It may be necessary to guide the belt into the pulley slots whilst turning the crank. Once fitted ensure belt is correctly fitted
D.O.R.
MADE IN ENGLAND
Flexible Drive Belt Stretcher
NEW!
$92.50Part No. 077400
Ex GST $84.09
www.tridon.com.au 2www.tridon.com.au2
l The tap wrench is specifically designed to give the user the reach and leverage required for accurate tapping. l Holds taps reamers, screw extractors and other hand turned tools. l Permits the handle to be positioned so that leverage can be applied when working in confined spaces.
Tap Wrench T Handle Type
l Set includes one of each 50mm, 75mm, 100mm and 150mm squares in wooden boxl Manufactured to BS939 - Grade B
Engineer’s Precision Square Set
Type Part No. LengthJaw Holding Capacity Price Ex.
GSTPrice Inc.
GSTSquare Tap
Ratchet09320 86mm 2.6-5.5mm M4-M6 $17.73 $19.5009321 111mm 4.6-8mm M6-M10 $20.86 $22.95
l Manufactured from high quality steel tubing, these double ended box wrenches have a different socket size on each endl Thin and long body allows these to be used to loosen or tighten nuts and bolts in narrow, recessed areas. Supplied with tommy bars.
Box Wrench Sets
Type Part No. Set Contains Price Ex. GST Price Inc. GST
Metric 32019 Six 8 - 19mm box wrenches$20.45 $22.50
Imperial 32109 Six 1/4” - 5/8” box wrenches
l 90O swivel hinged jaws give flexible access to filters with even the most awkward accessl Poly grip handlesl Capacity: 57-120mm dia.
Swivel Jaw Filter Remover
l Makes 4 different twin/triple leg pullers, plus bearing separator kit.l Supplied in lockable metal case.
Hydraulic Puller &Separator Kit
Puller Spread Min - Max
Puller Reach
External Spread
External Reach
50-150mm Max 150mm Min-Max 20-105mm Max 876mm
l Includes 3 sets of 100mm triple leg pullers with locking features which clamp the jaws for internal and external bearing removall Silde hammer capacity 1.1kgl Drop forged chrome vanadium steel
Slide Hammer GearBearing Puller Set
$99.50Part No. 01011
Ex GST $90.45
l Robust clamp for applications requiring extra resilience under extreme pressure. l These can be fixed to workbench. l T bar made from cold drawn steel, malleable iron head & slide. l Steel screw has acme threads for smooth movement.
T Bar ClampPart No. Length Capacity
Price Ex. GST
Price Inc. GST
39100 900mm 750mm $38.64 $42.5039101 1200mm 1050mm $43.18 $47.5039102 1500mm 1350mm $47.73 $52.50
$42.50Ex GST $38.64
FROM
$22.50Ex GST $20.45
EACH $19.50Ex GST $17.73
FROM
$109.50Part No. 038500
Ex GST $99.55
$999.50Part No. 155200
Ex GST $908.64
$179.50Part No. 269000
Ex GST $163.18
l Handy small cleaning set with a multitude of uses.l Contains three 180mm brushes comprising one nylon, one brass and one steel.l Ideal for removing dirt, grime, rust scale, paint and for mag wheel cleaning etc.
Brush Set 3 piece
$4.95Part No. 301003
Ex GST $4.50
l Chrome-moly steel, heat-treated and chrome platedl Converts hammer impact to powerful torquel Loosens rusted screws, nuts and boltsl Complete with a metal storage casel Includes hammer driver and four bits (36mm long):
Phillips No 2 and No 3. Slotted 9mm and 11mm
Professional Impact Driver Set
$37.50Part No. 301095
Ex GST $34.09
available FEBRUARY - MARCH 2011
3 www.tridon.com.au 3www.tridon.com.au
l 150mm x 38mm deepl Strong built-in magnet
Magnetic Stainless Steel Tray
$15.95Part No. 301006
Ex GST $14.50 Stethoscopel Economical sonic diagnostic unit, locates noises in machinery, engines, compressors, transmissions, drive trains etc.l Plastic earphones reduce external noise during diagnosisl Aluminium alloy probe and extensi on for pinpointing the exact locationl 740mm long, 220mm probe extension
available FEBRUARY - MARCH 2011$14.50
Part No. 301009
Ex GST $13.18 Flexible MagneticPick-Up Tooll Flexible stainless steel shaft bends and holds in all positionsl Strong magnet on 510mm long extensionl Slender 5mm shaft diameter ensures access to confined spacesl Comfort grip handles
$9.50Part No. 301017
Ex GST $8.64
l Radius jaw design prevents damage to internal hose lining.
Hose Crimping Tools
Part No. Length Description Price Ex. GST
Price Inc. GST
301022 150mmFor fuel vacuumand brake lines
$8.64 $9.50
301023 185mm For heater hoses $11.77 $12.95
301024 255mm Radiator hoses $13.59 $14.95
l Removes oil and grease sealsl Two removal hooks designed to cover most applicationsl Solid plastic handle ensures a positive grip for the operatorl 310mm overall length
Oil Seal Remover
$10.00Part No. 301042
Ex GST $9.09
l Stainless steel probe with comfort grip handle
l Ideal for scribing, marking, picking and oil seal removal.
Pick & Hook Set
$9.50Part No. 301043
Ex GST $8.64
l Set of seven nylon tools which disconnect the spring lock couplings on air conditioning linesl Easy to use in tight spacesl The kit includes sizes 6, 8, 10, 12, 16, 20 and 22mm
Air Conditioning & Fuel Line Disconnect Set
$13.95Part No. 301060
Ex GST $12.68
l Restoration tool for damaged or corroded threadsl Repairs almost any diameter bolt or studl Handles left or right handed threadsl Compact and solid in constructionl 230mm long, ideal for working in hard to access areas
Thread Files $37.50Ex GST $34.09
EACH
Type Part No. Pitch Size
Metric 301065 0.80, 1.00, 1.25, 1.5, 1.75, 2.00 & 3.00
Imperial 301066 24-20-18-16-14-12-11-10
l Removes oil seals, O rings, cotter pins and bushesl Stainless steel probe with acetate handlel Length 270mm
Extra Long Hook & Pick Set 4 Piece
$28.95Part No. 301072
Ex GST $26.32
l The hollowed, cylindrical head contains a series of steel pellets inside that move up and down with the rise and fall of the hammer. l The effect is deadening the blow at point of impactl Dead blow hammers generally produce more impacting power and are non-marringl Suits general use and tyre changingl Manufactured from oil resistant SBR material with a comfortable rubber grip handle
Dead Blow Hammers
Part No. Length Face Length Price Ex. GST
Price Inc. GST
301079 35mm 90mm $17.05 $18.75
301080 45mm 90mm $17.05 $18.75
301081 55mm 110mm $25.00 $27.50
301082 65mm 130mm $30.45 $33.50
l Cleans and adjusts windscreen nozzle jetsl Enables adjustment to the washer spray direction by using the needle
Windscreen Nozzle Cleaning Needle
$7.95Part No. 301164
Ex GST $7.23
l Drop forged carbon steel jaws for strength and durability
Pipe Wrenches
Part No. Length Jaw Price Ex. GST Price Inc. GST
301217 250mm 42mm $16.32 $17.95301218 300mm 48mm $20.86 $22.95301220 450mm 76mm $32.68 $35.95
$17.95Ex GST $16.32
FROM
l 240mm x 140mm x 30mm deepl Two strong 80mm built-in magnets
Magnetic Stainless Steel Tray
$25.95Part No. 301398
Ex GST $23.59
www.tridon.com.au 4www.tridon.com.au4
l Non slip rubber mat prevents tools from moving in drawers of tool boxes and chestsl 1950mm x 600mm
Tool Box Rubber Mat
$19.95Part No. 301169
Ex GST $18.14
l Heavy duty punch and chisel sets supplied in durable storage pouch
Pin Punch Sets$29.95Part No. 301181
Ex GST $27.23
7 Piece HD Pin Punch
$39.95Part No. 301182
Ex GST $36.32
5 Piece Extra Long Punch
$39.95Part No. 301183
Ex GST $36.32
6 Piece Chisel Set
$42.98Part No. 301184
Ex GST $39.07
7 Piece Punch & Chisel Set
Part No. Description301181 7 piece HD Punch Set
301182 5 piece Extra Long Punch Set
301183 6 piece HD Chisel Set
301184 7 piece Punch & Chisel Set
Magnetic Pick-Up & Release Tooll Magnetic pick up tool collects all metal components easily from the workshop floorl In-built magnet release automatically releases metal components saving timel Handle extends from 700mm to 1000mml Lifts up to 9kg/20Ilbs
$79.95Part No. 301189
Ex GST $72.68
l Long reach scraper ensures easy access in confined areasl Holds single sided safety razor bladesl Ideal for removing decals, stickers from glass
Scraper Set 280mm $9.98Part No. 301247
Ex GST $9.07
Ratchet Podgersl Made from high quality drop-forged chrome vanadium steell Combination double socket - two sizes in onel In-built ratchet reverse direction leverl Tapered end designed to align bolt holes easilyl Specially designed for heavy duty/industrial use where extra
leverage and size is required in confined spaces
Part No. Size Length PriceEx. GST
PriceInc. GST
301228 18 x 24mm 315mm $38.64 $42.50
301234 24 x 30mm 450mm $58.64 $64.50
301243 21 x 24mm 240mm $39.05 $42.95
301243
$42.50Ex GST $00.00
FROM
Gas Strut Shaft Support Tool l Supports and locks onto gas strut shafts to enable worn gas strut to be fixed in the extended position during service.l Suitable for all gas struts on bonnets, boots or hatchbacks by clamping and locking to the shaft.
Stubby Ratchet Wrench Set Metricl Polished tempered forged alloy steel
l 72 teeth ratchet ring
l In convenient tool box organiser
l Combination ring/open end
l Metric Size: 10, 12, 13, 14, 15, 17, 19mm
l 7 piece set
$89.95Part No. 301338
Ex GST $81.77
Stubby Ratchet Wrench Set Imperiall Polished tempered forged alloy steel
l 72 teeth ratchet ring
l In convenient tool box organiser
l Combination ring/open end
l SAE Size: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”
l 7 piece set
$89.95Part No. 301361
Ex GST $81.77
l SAE or Metric ring and open endl 72 teeth ratchetl Polished tempered forged alloy steell Supplied on a convenient rack organiser, designed for wall mounting or tool box storage
Part No. Description Size PriceEx. GST
PriceInc. GST
301892 SAE 13 Piece 1/4” - 1” $177.27 $195.00301893 Metric 12 Piece 8-19mm $162.73 $179.00
$179.00Ex GST $162.73
FROM
l Ribe or polydrive as used on most European vehicles
Power Bit Set Ribe Type 21 Piece
Item Size Range Qty
CR-V Bit holder3/8” drive 1 each
1/2” drive 1 each
10 x 40mm L Ribe BitsM5, 6, 7, 9, 10 (S2) 1 each
M11, 12, 13 (CR-V) 1 each
10 x 75mm L Ribe BitsM5, 6, 7, 8, 9, 10 (S2) 1 each
M11, 12, 13, 14 (CR-V) 1 each
$59.95Part No. 301168
Ex GST $54.50
$21.50Part No. 301276
Ex GST $19.55
RatchetWrench Sets
available FEBRUARY - MARCH 2011
5 www.tridon.com.au 5www.tridon.com.au
available FEBRUARY - MARCH 2011
l Comprehensive master set eliminates damage to bearings and sealsl Contains a hammer, drive shaft and 33 flat bearing and seal adaptors plus three shaft sizes and dead blow hammer.l Adaptors are manufactured from high impact P.O.M materials
Bearing Installer & Remover Set
$439.95Part No. 301301
Ex GST $399.95
Quick Release Ratchet Handlesl 72 teeth ratchet allows use in confined spacesl Finger control disk provides one hand operationl Comfort grip handle
Part No. Description Price Ex. GST Price Inc. GST
301401 1/4” sq drive $22.68 $24.95301402 3/8” sq drive $26.32 $28.95301403 1/2” sq drive $34.50 $37.95
l 100 piece bit set in storage case contains Phillips, Posi Drive, Slotted, Six Point and Hexagonal bit holder bit extension
Bit Set 100 Piece
$44.95Part No. 301447
Ex GST $40.86
Air/Power Tool Magnetic Holderl Powerful magnetic holder designed to hold four impact sockets and most pistol type air impact guns
l Supports a total weight up to 15 kg on any metal surface
l Can also be screw-mounted to the wall
Metal frame, PVC coated
$33.50Part No. 301448
Ex GST $30.45
Crowfoot Wrench Setl Metric 14 piecel Tempered forged alloy steell 1/2” sq drivel Straight jawl Sizes 27mm - 50mm
$199.50Part No. 301465
Ex GST $181.36
l Spring claw allows easy access in confined areasl Depressing the button extends the clawl Shaft diameter: 6mm (1/4”)l Length: 600mm (24”)l Maximum opening: 25mm (1”)
Flexible Spring Claw Pick Up Tool
$13.50Part No. 301499
Ex GST $12.27
Electronic Stethoscope l For diagnosis of engine noise irregularitiesl Set includes headset and adjustable microphone with volume control, complete with flexible probe to detect and pin point noisesl Supplied with 9 volt battery
$109.95Part No. 301637
Ex GST $99.95
l Contains three scrapers with metal striking handle.l Stainless steel blade, plastic handle
Stainless Steel Scraper Set 3 Piece
$28.50Part No. 301651
Ex GST $25.91
Air Blow Gun100mm Angle Nozzlel Working pressure: 520-830 kPa (75-120 PSI)l Comfort grip nylon body with 100mm steel angle nozzlel Brass 1/4” female NPT thread
$11.25Part No. 301679
Ex GST $10.23
l For securing tools when working at high levels such as roofs, scaffolding etc, to prevent loss of tools and downtime retrieving fallen tools
l Stainless steel wire, PU Coatedl Attach to belt and tool to prevent tools from falling if droppedl Available in 5kg and 10kg rated strengthl Supplied with small wire and ring to attach tool to body or fixing point
Security Spring Hooks
Part No. Load Weight
Working Length
Extends to
PriceEx. GST
PriceInc. GST
301907 5kg 430mm 1400mm $18.14 $19.95301908 10kg 600mm 1800mm $19.95 $21.95
$21.95Ex GST $19.95
FROM
301907
301908
Remote Control Starter Switchl Starter switch used to bypass ignition switch by connecting starter to solenoidl Simply attach a 9 volt battery then plug the tool into the cigarette lighterl Retains settings for up to four hours
$19.95Part No. 302004
Ex GST $18.14
l Removes and replaces oil filters located in difficult access positionsl 3/8” or 1/2” sq drl Suits oil filters 60-125mm diameter
Oil Filter Remover 3 Jaw
$24.50Part No. 305021
Ex GST $22.27
l Compact and versatilel Extends from 200mm to 355mml Mirror is attached via a ball joint swivel to the extension handlel 50mm diameter round mirror
Telescopic Inspection Mirror
$9.25Part No. 301016
Ex GST $8.41
Extends to 355mm
Drum Dollyl Extra heavy duty design, wide steel in premium powder coated finishl Heavy duty steel construction, steel cross brace, cast iron casters
$179.50Part No. 305265
Ex GST $163.18 Smart Funnelsl Heavy duty polypropylene constructionl Designed with special contours in the funnel body for easy handling.l Anti splash and spill proof, with rim of funnel curved in l Complete with wire mesh screen, dust cover and flexible spoutl Available in 2 sizes - the larger size includes Drum Bung Attachment, which allows the funnel to be mounted direct onto drums with 2” threaded openingl Manufactured in translucent white to give a clear view of fluid
Part No. Capacity Diameter Spout Length
PriceEx. GST
PriceInc. GST
305388 1.7 Litre 205mm 170mm $13.18 $14.50
305389 3 Litre 240mm 245mm $18.14 $19.95
2” Bung for direct attachment to drum
(Part No. 305389 only)
Flexible Spout
Dust Cap$14.50Ex GST $13.18
FROM
l Suits 14mm single Hex and Bi-Hex spark plugs including wider ceramic body types l Easy placing/removing plugs in deep recesses, with difficult accessl Eliminates the need for extensionsl Heavy-duty rubber insert grips plug to assist in plug installationl Knurled/Milled barrel for non-slip grip when starting new plugs Traditional Hex Design Bi-Hex Design
Bi-Hex Design *provides increased strength compared to a traditional Hex design, allowing for a more compact spark plug without compromising strenght requirements.
Spark Plug Sockets Extra Long
Part No. Description Drive Length PriceEx. GST
PriceInc. GST
302222 16mm Single Hex 3/8” Sq Drive 250mm $21.77 $23.95302223 21mm Single Hex 3/8” Sq Drive 250mm $23.59 $25.95302224 14mm Bi- Hex* 3/8” Sq Drive 250mm $23.18 $25.50
l Built in 2” Bung Nut, Non-Drip Nozzle, Spring Loaded Drain Back Tube for overflown media & Lever for padlocking the pump
l Supplied complete with Telescopic Suction Tubel Economical option for applications that require metered delivery of medial Suits 50-205L Drumsl Suitable for Gear & Lube Oil & Petroleum based Medial Not recommended for water based & other corrosive fluids Delivers: 1 lt per stroke
Quart/Litre adjustment screw
Pump outlet
Spring loaded drain back tube
Latch for pad locking
2” Bung adaptor with lock nut
NEW!
Litre Stroke Pump
$229.50Part No. 305018
Ex GST $208.64
l Essential item to accompany every drum pump l Used as a drain for returning overflown media back into the druml Fits any 2” threaded opening on a drum & any pump with a 2” bung adaptorl Also works as a base for holding a container during dispensingl 2” bung adaptor with strainer for dispensing clean media back into the druml Cast aluminium body with 2” external & internal threads
Universal Drip Pan$89.50Part No. 305020
Ex GST $81.36
NEW!
l Fits into 3/4” threaded opening on 205 Litre drumsl Facilitates convenient dispensing of media under gravity flow l Lockable
Drum Tap Lockable with Bucket Hanger
$9.95Part No. 305071
Ex GST $9.05
l Suitable for transfer of diesel, kerosene, heating oils, motor oils, lubricating oils (up to SAE 90) and non-corrosive fluids of light to medium viscosityl Sturdy cast iron pump housing with two heavy duty cast iron vanes for better draw and smoother deliveryl Hi Nitrile rubber sealsl Fits 50 litre to 205 litre drums
Rotary Drum Pump
$95.00Part No. 305251
Ex GST $86.36
NEW!
NEW!
l Dial face diameter - 25mm l Scale: 0° to 220°F scale Fahrenheit
Thermometer$12.50
Part No. 308002
Ex GST $11.36
Noid Light & IAC Signal Test Set 10 Piecel The most economic way to check electronic fuel injection (EFI) and idle air control signals.
$49.95Part No. 307226
Ex GST $45.41
www.tridon.com.au6
1 www.tridon.com.au 7www.tridon.com.au
available FEBRUARY - MARCH 2011
Cooling System Testerl Comprehensive kit enables testing on a wide range of cooling systems for both passenger vehicles and light commercialsl Adaptors fitted with quick-release couplingsl High powered, manual pressure pump with easy to read, colour coded gaugel In line pressure regulator for easy connection to an air supply valve
$375.00Part No. 308300
Ex GST $340.91
One Man Brake Bleeder Kitl Easy to use one man brake bleeding kit with no messl Set includes hands free, powerfully magnetised fluid connection bottle with hoses and tapered fittings
$8.50Part No. 310261
Ex GST $7.73
Disc Brake Pad Spreaderl To compress brake pistons for fast removal of disc padsl Mechanical screw action pushes brake pistons to enable clear space for the prompt removal of the pad
$9.50Part No. 310265
Ex GST $8.64
Rear Disc Brake Piston Cubel Use with 3/8” drive ratchet for turning the piston back into the caliper when replacing the padsl The tool fits six different cavity configurationsl Suits most vehicle applications
$9.50Part No. 310269
Ex GST $8.64
Door Trim Removerl Well-designed tool that removes upholstery clips quicklyl Simply place the tool under the edge of the door panel and insert into fastener, then pry upwards
$9.50Part No. 313297
Ex GST $8.64
l Convenient pocket size cutter for general purpose usel Spring action enables single hand operationl Blade made from alloy metal l Popular for trade and DIY use as it can cut through small bolts, heavy
(non-stranded) wire and nails
Handy Pocket Cutters
Tyre Levers
$17.98Part No. 316006
Ex GST $16.35l Forged punches quenched and tempered to resist hard working stressl Made in Germany
Taper Punches
Part No. Length PriceEx. GST
PriceInc. GST
440004 120mm 10mm 4mm$5.41 $5.95
440005 120mm 10mm 5mm
Flat Scraperl Alloy tool steel, blade ground, shank lacquered with wooden gripl Length 200mml Shaft size 20 x 5mml Made in Germany
$15.95Part No. 460200
Ex GST $14.50
l For square drive sockets.l With freewheel sleeve for ultra fast tightening or loosening of screws and nuts
Drive Length Part No Price Ex. GST
Price Inc. GST
3/8” 125mm 05 003591 001 $23.59 $25.95
1/2” 125mm 05 003642 001 $28.14 $30.95
3/8” 200mm 05 003592 001 $23.18 $25.50
1/2” 250mm 05 003643 001 $27.23 $29.95
Zyklop Ratchet Extensions Short/Long
l With non slip comfortable handlesl Length: 250mm
Files
Part No. Type Grade PriceEx. GST
PriceInc. GST
10FL01CD Flat Coarse $10.45 $11.50
10HR01CD Half round Coarse $12.27 $13.50
10RD01CD Round Coarse $10.45 $11.50
$11.50Ex GST $10.45
FROM
Stainless Steel Rule Metricl 300mm Double sided l One square and one rounded end with hanging hole
$12.50Part No. 300SP
Ex GST $11.36
l For easy installation and removal of most hose clampsl Flexible shaft allows access to difficult locationsl High torque grip for positive tensioning of clampsl Includes 6mm, 7mm and 8mm socketsl Length: 600mm
Hose Clamp Nut Driver
$12.95Part No. CND-3
Ex GST $11.77
Part No. Length PriceEx. GST
PriceInc. GST
309033 400mm $18.14 $19.95
309034 500mm $22.68 $24.95
309035 600mm $27.23 $29.95
l Forged chrome vanadium alloy steell Hardened and Tempered
Available 1st February - 31st March 2011 www.tridon.com.au
Prices valid 1 February to 31 March 2011. Please refer to the relevant Tridon catalogues for more comprehensive product information. As participating stores are independant businesses, they reserve the right to set their own selling prices. Pricing throughout this publication is the recommended trade price and may vary from store to store. Every effort has been made to
ensure stocks are available at the time of printing. Should any item not be in stock on placement of orders, stores will endeavour to procure those published items. Product images are for illustration purposes only. Produced by Tridon Australia Pty Ltd ACN 001 398 698 ABN 90 001 398 698
l Multi function 15 piece chisel and punch set complete with spring loaded safety handle and 14 attachmentsl Suitable for workshop and DIY
Chisel & Punch Set$62.95
Part No. 301149
Ex GST $57.23
Spanner Rack Organiserl High impact plasticl Ideal for wall, shadow board or tool chestl Suitable for open end, ring or combination spannersl Capacity 12 piecel Height 230mm
$7.95Part No. 301167
Ex GST $7.23
l Replaces a complete set of spannersl For all applications on hexagon bolt heads and nuts with metric and imperial sizesl Also perfect for tightening locknuts and works on rounded nutsl Length 250mml Made in Germany
Multiple Slip Joint Spanner
Ratchet Head Breaker Bars
BlackLaser® Hex Keys 7 Piecel Improved corrosion protection for a longer service lifel Ballpoint permits safe operation even in difficult applicationsl Seven piece set with rubber clipl Sizes: 1.5, 2, 2.5, 3, 4, 5 and 6mm
l Extra-long shaft for greater leverage and force.l 180° flexible ratchet head.
$54.98Part No. 05 022533 001
Ex GST $49.98
Self locking: no slip on workpieces; less effort required
$69.95Part No. 8741250
Ex GST $63.59
l Contains 220 assorted clamps for fuel injection applications
l Handy carry case provides one compact location
Fuel Injection Clamp Pack
$105.95Part No. FI220
Ex GST $96.32
Measuring Tapesl Fibreglass
Part No. LengthPF10030M 30m / 100ft
PF30M 30m
$14.95Ex GST $13.59
EACH
l Automatic wire stripper and wire cutterl Crimps insulated, non-insulated and auto ignition terminals
Wire Stripper
$21.50Part No. WS210
Ex GST $19.55
l Stainless steel blades, acrylic handlesl Length: 160mm
Household Scissors
$4.95Part No. TSH160CD
Ex GST $4.50
l Hardened chrome vanadium steell 200mm & 250mm Flat Cold Chisels 2, 3, 4, 5mm Parallel Pin Punches (150mm Length)l Resists high working stressl Long service lifel Made in Germany
Cold Chisel & Pin Punch Set 6 piece
$55.00Part No. RFCCS6
Ex GST $50.00
l Double ended with knurled body for marking and scoringl Length: 190mm
Scriber
$5.95Part No. MS7
Ex GST $5.41
Part No. Description Price
Ex. GSTPrice
Inc. GST
301935 1/2” Sq. Dr. 600mm $54.50 $59.95
301936 3/4” Sq. Dr. 600mm $99.95 $109.95
9
42 piece Metric
1 Zyklop ratchet with 1/4” drive
13 Zyklop metric sockets
2 Zyklop extensions
1 wobble extension
1 sliding t-handle
1 adaptor with quick release chuck
22 bits
Zyklop Drive Ratchet Set1/4” 43 piece Metric
1 Zyklop ratchet with 3/8” drive
18 Zyklop metric sockets
2 Zyklop extensions
1 sliding t-handle
1 universal joint
1 Zyklop ratchet with 3/8” drive
18 Zyklop metric sockets
2 Zyklop ‘flexible lock’ extensions
1 wobble extension
1 universal joint
1 adaptor with quick release chuck
18 bits
1 Zyklop ratchet with 3/8” drive
12 Zyklop imperial sockets
2 Zyklop extensions
1 sliding t-handle
1 universal joint
1 Zyklop ratchet with 3/8” drive
12 Zyklop imperial sockets
2 Zyklop ‘flexible lock’ extensions
1 wobble extension
1 Sliding + T- handle
1 universal joint
1 adaptor with quick release chuck
19 bits
1 Zyklop ratchet with 1/2” drive
17 Zyklop metric sockets
2 Zyklop extensions
1 sliding t-handle
1 universal joint
1 Zyklop ratchet with 1/2” drive
17 Zyklop metric sockets
2 Zyklop ‘flexible lock’ extensions
1 wobble extension
1 universal joint
1 adaptor with quick release chuck
13 bits
1 Zyklop ratchet with 1/2” drive
18 Zyklop metric sockets
2 Zyklop extensions
1 sliding t-handle
1 universal joint
* All sets in metal case with foam inlay
$349.50Part No. 05 003533 001
Ex GST $317.73
$499.50Part No. 05 003644 001
Ex GST $454.09
$459.50Part No. 05 003594 001
Ex GST $417.73
$399.50Part No. 05 003593 001
Ex GST $363.18
$579.00Part No. 05 003645 001
Ex GST $526.36
$369.00Part No. 05 003595 001
Ex GST $335.45
$515.00Part No. 05 003646 001
Ex GST $468.18
$435.00Part No. 05 003596 001
Ex GST $395.45
Zyklop Drive Ratchet Set
22 piece MetricZyklop Drive Ratchet Set
1/2” 37 piece MetricZyklop Drive Ratchet Set
1/2” 23 piece ImperialZyklop Drive Ratchet Set
3/8” 23 piece MetricZyklop Drive Ratchet Set
3/8” 17 piece ImperialZyklop Drive Ratchet Set
3/8” 38 piece ImperialZyklop Drive Ratchet Set
master set!
master set!
master set!
master set!
8www.tridon.com.au
1/4”
1/2”
1/2”
1/2”
1/4”
3/8”
3/8”
3/8”
1 fine tooth ratchet+ 1 flex head ratchet+ 1 angle ratchet+ 1 nut fixing ratchet+ 1 power ratchet+ Can also be used as a screwdriver
HOTPRICES
The Fastest Ratchet in the world!
Swivels by nature, if not by name!l The ratchet features a swivelling head that can be released in any position.
This means you can work easily even in cramped or awkward spaces.
l The defined locking points at 0o, 90o left and right, and 15o/90o inwards prevents
the ratchet head from slipping for reliable work.
l The special feature: at the 0o position the ratchet can take a socket or the Zyklop
bit holder and be used like a conventional screwdriver.
Fast turning work l Zyklop ratchets are really fast movers: the rotating mass design
accelerates the screwdriving process.
l Think of a spinning top: simply give it a brief spin, and the top
rotates on and on quickly and steadily.
l To secure the nut/screw at their final positions, switch over
the lever and tighten the screw union as necessary.
Nice and handyl The Kraftform handle has been designed to fit snugly in your hand,
so blisters and callouses are a thing of the past.
l The hard materials promote fast applications and prevent the skin from
“sticking”. The softer, “more antislip”zones ensures maximum torque.
This combination is unbeatable!
www.tridon.com.au