Industrial Oil

GREASE EPX & SUPER EPXTURALIK MEDITRAN SRORED HDA & EPA

TURBOLUBE MEDITRAN SX PLUS CI-4NG LUBE

www.pertaminalubricants.co.id

PlusPlus

Meditran SX Plus SAE 15W-40 API CI-4 is a top performance heavy duty diesel engine oil, with high performance level, based on API Service Category.

Meditran SX Plus SAE 15W-40 API CI-4 is especially formulated for the latest heavy duty diesel engine using EGR (Exhaust Gas Recirculation) technology.

Meditran SX Plus SAE 15W-40 API CI-4 has been approved in having longer drain interval in application of heavy duty diesel engine.

Meditran SX Plus SAE 15W-40 API CI-4 adalah pelumas mesin diesel tugas berat kualitas unggul dengan kekentalan ganda dan memiliki tingkat unjuk kerja tinggi berdasarkan kategori API Service.

Meditran SX Plus SAE 15W-40 API CI-4 diformulasikan secara khusus untuk mesin diesel tugas berat terkini yang menggunakan teknologi EGR (Exhaust Gas Recirculation)

Meditran SX Plus SAE 15W-40 API CI-4 telah terbukti dapat memberikan masa pakai pelumas yang lebih panjang.

SUPERIORITIES• Stable viscosity that gives optimum acceleration & engine

protection during start up and high temperature operation.• High durability against oxidation & high temperature, combined

with improved alkalinity reserve, provides optimum protection from wear and corrosion and proven longer oil drain interval

• Balanced detergency and dispersancy resulting in very good soot control and engine cleanliness that maintain engine and filter performance.

KEUNGGULAN• Kekentalan ganda yang stabil memberikan akselerasi &

perlindungan optimal terhadap mesin saat start up dan operasi pada temperatur tinggi.

• Ketahanan tinggi terhadap oksidasi dan panas, dikombinasikan dengan alkalinity reserve, memberikan perlindungan optimal terhadap keausan dan korosi serta masa pakai pelumas yang terbukti lebih lama.

• Keseimbangan antara detergency & dispersancy yang memberikan kemampuan soot control & kebersihan mesin, mempertahankan kinerja mesin & filter

PERFORMANCE LEVELSMeditran SX Plus SAE 15W-40 API CI-4 has high performance level based on API Service, API CI-4. The complete performance level of this lubricant are as follows: API CI-4 (approved)/CH-4/CG-4/CF-4/SL, ACEA E7/B4/A3, MB-Approval 228.3, MAN 3275, Volvo VDS-3, Mack EO-M Plus, Cummins 20071/73/76/77/78, MTU Category 2, CAT ECF-2, ECF-1a, Renault Truck RLD-2/RLD

TINGKATAN MUTUMeditran SX Plus SAE 15W-40 API CI-4 memiliki tingkat kerja tinggi berdasarkan API Service, yaitu API CI-4. Secara lengkap tingkat unjuk kerjanya sebagai berikut: API CI-4 (approved)/CH-4/CG-4/CF-4/SL, ACEA E7/B4/A3, MB-Approval 228.3, MAN 3275, Volvo VDS-3, Mack EO-M Plus, Cummins 20071/73/76/77/78, MTU Category 2, CAT ECF-2, ECF-1a, Renault Truck RLD-2/RLD

APPLICATIONSMeditran SX Plus SAE 15W-40 API CI-4 is designed to be used in latest heavy duty diesel engines includes those with EGR technology, using high speed diesel fuel with maximum Sulphur content up to 0.5%.

Meditran SX Plus SAE 15W-40 API CI-4 is suitable for many types of heavy duty diesel engines that used in vehicles (Multi Purposes Vehicles, buses, trucks, etc), genset engines, heavy equipments (off roads) for industrial and construction, ship engine, and locomotive engines.

PENGGUNAANMeditran SX Plus SAE 15W-40 API CI-4 didesain untuk digunakan pada mesin diesel tugas berat termasuk yang menggunakan EGR, yang menggunakan minyak Solar dengan kadar sulfur maksimum 0.5%.

Meditran SX Plus SAE 15W-40 API CI-4 sesuai untuk berbagai jenis mesin diesel tugas berat pada kendaraan (Multi Purposes Vehicles, bus, truk, dll), mesin genset, alat berat (off roads) untuk industri dan konstruksi, mesin kapal dan mesin lokomotif.

TYPICAL CHARACTERISTICS

Characteristics Test Methods MEDITRAN SX PLUS SAE 15W-40 API CI-4

SAE Viscosity Grade 15W-40

Density at 150C, kg/l ASTM D - 4052 0.8860

Kinematic Viscosity at 400C, cSt at 1000C, cSt

ASTM D - 445ASTM D - 445

96.8614.37

Viscosity Index ASTM D - 2270 153

ASTM Colour ASTM D - 1500 L 4.0

Flash Point, 0C ASTM D - 92 254

Pour Point, 0C ASTM D - 5950 -23

Total base Number, mg KOH/g ASTM D - 2896 11

MEDITRAN S Series are heavy duty diesel oil, formulated from high viscosity index base oil and balanced additive system. MEDITRAN S Series offer protection against wear and corrosion and effective deposit control.

MEDITRAN S Series are suitable for turbocharged, supercharged, or naturally aspirated high speed diesel engines for transportation, heavy equipment, industry or marine applications.

MEDITRAN S 10W and MEDITRAN S 30 are recommended for transmission and hydraulic system of heavy duty machineries.

MEDITRAN S Series adalah pelumas mesin diesel tugas berat, yang diformulasikan dari base oil yang mempunyai viscosity index tinggi dan aditif yang seimbang. MEDITRAN S Series memberikan perlindungan terhadap keausan dan korosi serta efektif dalam mengontrol terbentuknya deposit.

MEDITRAN S Series dapat digunakan untuk pelumasan mesin diesel kendaraan, alat berat, industri maupun perkapalan putaran tinggi jenis turbocharged, supercharged, atau naturally aspirated.

MEDITRAN S 10W and MEDITRAN S 30 dianjurkan untuk sistem transmisi dan hidrolik pada mesin diesel tugas berat.

PERFORMANCE LEVELSMEDITRAN S Series meet the specification of API CF/CF2, MB-Approval 228.0 (SAE 40) and MB-Approval 235.12, and Komatsu KES 07.851.2000 (SAE 40)

MEDITRAN S Series also meet the specification of ACEA E2-96, CAT TO-2, MIL-L-2104D and MIL-L-46152B

MEDITRAN S10 W and 30 are meet Allison C4 specification.

TINGKATAN MUTUMEDITRAN S Series memenuhi spesifikasi API CF/CF2, MB-Approval 228.0 (SAE 40) and MB-Approval 235.12, and Komatsu KES 07.851.2000 (SAE 40)

MEDITRAN S Series juga memenuhi spesifikasi ACEA E2-96, CAT TO-2, MIL-L-2104D and MIL-L-46152B

MEDITRAN S10 W dan 30 memenuhi spesifikasi Allison C4.


Characteristics Test Methods MEDITRAN S10W

MEDITRAN S30

MEDITRAN S40

MEDITRAN S50

SAE Viscosity Grade 10W 30 40 50

Density at 150C, kg/l ASTM D - 4052 0.8832 0.8921 0.8953 0.9000



37.76.24

98.611.2

143.814.4

235.519.92

Viscosity Index ASTM D - 2270 113 99 98 97

ASTM Colour ASTM D - 1500 L 4.5 L 5.0 L 5.0 L 5.5

Flash Point, 0C ASTM D - 92 230 236 244 244

Pour Point, 0C ASTM D - 5950 -28 -12 -12 -9

Total Base Number, mg KOH/g ASTM D - 2896 11.2 11.16 11.16 11.34

Grease EPX-NL1 & EPX-NL2Grease EPX-NL1 & EPX-NL2

GREASE PERTAMINA EPX-NL1, EPX-NL2 are high quality extreme pressure, multipurpose greases based on Lithium 12-hydroxystearate soap and selected performance EP additive which can handle extreme load.

GREASE PERTAMINA EPX-NL1, EPX-NL2 have pass of ASTM Rust Test (D-1743) and also having EP Performance (ASTM D-2596) welding load 315 kg.

GREASE PERTAMINA EPX-NL1, EPX-NL2 mempunyai dasar sabun Lithium 12-hydroxystearate dengan aditif extreme pressure pilihan sehingga dapat digunakan pada aplikasi beban ekstrim.

GREASE PERTAMINA EPX-NL1, EPX-NL2 telah lulus persyaratan ASTM Rust Test (D-1743) serta memiliki kemampuan menahan beban EP (ASTM D-2596) welding load 315 kg.

APPLICATIONS1. GREASE PERTAMINA EPX-NL1 is recommended for

heavy duty bearings served by central dispensing system and EP gear grease at normal ambient temperature.

2. GREASE PERTAMINA EPX-NL2 is recommended for heavy duty rolling and plain bearings and other general use, even in the wet environment and severe shock load conditions at operating temperatures up to 1400C.

3. GREASE PERTAMINA EPX-NL1, EPX-NL2 are not recommended for food industry or equipment where these grease maybe mistakenly mixed with materials.

PENGGUNAAN1. GREASE PERTAMINA EPX-NL1 disarankan untuk

bearing tugas berat yang terdapat dalam central dispensing sistem dan EP gear grease pada suhu lingkungan.

2. GREASE PERTAMINA EPX-NL2 dianjurkan untuk rolling dan plain bearing tugas berat serta pemanfaatan lainnya, bahkan untuk lingkungan yang basah dan kondisi beban kerja yang berat pada suhu operasi sampai 140 0C.

3. GREASE PERTAMINA EPX-NL1, EPX-NL2 ini tidak dianjurkan khususnya di pabrik makanan untuk melumasi mesin atau peralatan, yang dalam penggunaannya mungkin akan bercampur dengan bahan baku.


Characteristics Test Methods GREASE PERTAMINA EPX-NL1 GREASE PERTAMINA EPX-NL2

NLGI No. 1 2

Type of Soap Lithium 12-hydroxystearate Lithium 12-hydroxystearate

Structure Smooth Smooth

Penetration at 77 0F (250C), Worked ASTM D - 217 310-340 265-295

Dropping Point, 0C ASTM D - 566 190 200

Colour Visual Darker Yellow Darker Yellow

Mineral Oil Viscosity at 400C, cSt ASTM D - 445 180-225 190-240

Grease Super EPX 2Grease Super EPX 2

APPLICATIONSGREASE PERTAMINA SUPER EPX-2 can be used for lubrication of ball and roller bearings and journal bearings which operate up to temperatures of 1400C

GREASE PERTAMINA SUPER EPX-2 is also very suitable for applications of medium and high speed operation with extreme loads. GREASE PERTAMINA SUPER EPX-2 can also be used for coupling, chassis, gears, etc.

PENGGUNAANGREASE PERTAMINA SUPER EPX-2 dapat digunakan untuk melumasi ball dan roller bearing maupun journal bearing yang beroperasi hingga temperatur 140 0C

GREASE PERTAMINA SUPER EPX-2 juga sangat cocok digunakan untuk aplikasi operasi kecepatan medium maupun tinggi dengan beban ekstrim. GREASE PERTAMINA SUPER EPX-2 juga dapat digunakan untuk coupling, chasis, roda gigi, dll.

SUPERIORITIES• Reduce maintenance cost by providing an excellent

protection against wear and tear and damage due to extreme load.

• Extended the age of machinery and equipment because excellent properties to prevent rust and corrosion.

• Has high dropping point and excellent lubricity to prevent damage of spare parts in high temperature.

• Have a good sticky power so it does not easily separated by high speed and humidity.

• Very stable and no physical changes due to sunlight and wet environments.

KEUNGGULAN• Menurunkan biaya pemeliharaan dengan memberikan

proteksi yang sangat baik terhadap keausan dan kerusakan spare part akibat beban ekstrim.

• Memperpanjang usia mesin dan peralatan karena kemampuannya yang sangat baik untuk mencegah karat dan korosi.

• Memiliki dropping point yang tinggi dan kemampuan melumasi yang sangat baik untuk mencegah rusaknya spare part karena temperatur tinggi.

• Memiliki daya lengket yang baik sehingga tidak mudah terlepas oleh putaran yang tinggi dan udara yang lembab.

• Sangat stabil dan tidak mengalami perubahan fisik akibat sinar matahari dan lingkungan yang basah.


Characteristics Test Methods GREASE PERTAMINA SUPER EPX-2

NL GI No. 2

Type of Soap Lithium 12-hydroxystearate

Structure Smooth

Penetration at 77 0F (250C), Worked ASTM D - 217 265-295

Dropping Point, 0C ASTM D - 566 Min 200

Colour Visual Darker Brown

Mineral Oil Viscosity at 400C, cSt ASTM D - 445 150-200

GREASE PERTAMINA SUPER EPX-2 is a high quality grease designed specifically for extreme load applications that operate on high and medium speed. GREASE PERTAMINA SUPER EPX-2 is formulated from Lithium 12-hydroxystearate thickener and selected additive that suitable with chassis and bearing.

GREASE PERTAMINA SUPER EPX-2 has excellent water washout that suitable for high humidity operation area and protect engine components against rust and corrosion. GREASE PERTAMINA SUPER EPX-2 also suitable for industrial applications, locomotive and other heavy equipment.

GREASE PERTAMINA SUPER EPX-2 adalah grease berkualitas tinggi didisain khusus untuk aplikasi yang beroperasi pada kecepatan sedang maupun tinggi. GREASE PERTAMINA SUPER EPX-2 terdiri dari thickener Lithium 12-hydroxystearate dan dilengkapi dengan aditif pilihan sehingga cocok digunakan baik untuk chasis maupun bearing.

GREASE PERTAMINA SUPER EPX-2 memiliki kemampuan water washout yang sangat baik cocok digunakan untuk daerah operasi dengan kelembaban yang tinggi dan melindungi komponen mesin dari karat dan korosi. GREASE PERTAMINA SUPER EPX-2 juga cocok digunakan untuk aplikasi industri, lokomotif dan peralatan berat lainnya.

41, 43, 48, 52, 69

TURALIK Series are industrial hydraulic oil formulated from high quality, High Viscosity Index (HVI) mineral base oil which contains performance additive in order to provide excellent wear control, foaming prevention, rust and corrosion protection.

TURALIK Series adalah pelumas hidrolik yang diformulasikan dari base oil yang memiliki viscosity index yang tinggi dan mengandung performance additive yang lengkap untuk memberikan perlindungan terhadap keausan, mencegah terbentuknya busa, serta perlindungan karat dan korosi.

PERFORMANCE LEVELSTURALIK Series meet industrial hydraulic equipment requirement or specification such as MAG Cincinnati Machine P-68 (approved for Turalik 43), P-69 (approved for Turalik 52), and P-70 (approved for Turalik 48), Denison HF-0, HF-2 (approved for Turalik 43, 48, 52) and Vickers I-286S and M-2950-S (approved for Turalik 43).

TINGKATAN MUTUTURALIK Series memenuhi persyaratan atau spesifikasi hidrolik industri seperti MAG Cincinnati Machine P-68 (approved for Turalik 43), P-69 (approved for Turalik 52), and P-70 (approved for Turalik 48), Denison HF-0, HF-2 (approved for Turalik 43, 48, 52) dan Vickers I-286S and M-2950-S (approved for Turalik 43).

APPLICATIONSTURALIK Series are recommended for general hydraulic equipment, also for circulating or oil baths lubrication systems. They should not be used with silver plated components

PENGGUNAANTURALIK Series disarankan penggunaannya untuk peralatan hidrolik umum, serta untuk pelumasan sistem sirkulasi atau sistem bath. Pelumas ini tidak dianjurkan untuk melumasi komponen yang dilapisi dengan perak.


Characteristics Test Methods TURALIK41

TURALIK43

TURALIK48

TURALIK52

TURALIK69

SAE Viscosity Grade 22 32 46 68 100

Density at 150C, kg/l ASTM D - 4052 0.8680 0.8727 0.8830 0.8860 0.8910



23.024.56

32.075.48

46.297.02

68.238.74

100.4011.03

Viscosity Index ASTM D - 2270 114 109 106 100 98

ASTM Colour ASTM D - 1500 L 1.0 L 1.0 L 2.0 2.0 3.5

Flash Point, 0C ASTM D - 92 212 219 220 236 240

Pour Point, 0C ASTM D - 5950 -21 -21 -18 -12 -12

SAE 90, 140, 75W-90,80W-90, 85W-90,

85W-140

SAE 90, 140, 75W-90,80W-90, 85W-90,

RORED HDA SERIES and RORED EPA SERIES are high performance heavy duty gear oil which formulated from high quality base oils and selected Extreme Pressure additive.

RORED HDA SERIES dan RORED EPA SERIES adalah pelumas roda gigi tugas berat berkemampuan tinggi yang diformulasikan dari base oil bermutu tinggi dan aditif Extreme Pressure.

APPLICATIONSRORED HDA SERIES are recommended for lubrication of heavy duty hypoid gears and spiral bevel gear on final drive of motor vehicles.

RORED EPA SERIES are suitable for lubricating hypoid type gear wheel or spiral bevel at transmission, axle and steering box of vehicles engine with moderate duty operating condition. Not recommended for automatic transmission.

PENGGUNAANRORED HDA SERIES digunakan untuk melumasi roda gigi jenis hypoid atau spiral bevel pada gardan dan rumah/kotak kemudi kendaraan bermotor yang menpunyai persyaratan kerja tugas berat.

RORED EPA SERIES digunakan untuk melumasi roda gigi jenis hypoid atau spiral bevel pada gardan dan rumah/kotak kemudi kendaraan bermotor yang menpunyai persyaratan kerja tugas sedang. Tidak direkomendasikan untuk transmisi otomatis

PERFORMANCE LEVELSRORED HDA SERIES comply with specification API GL-5, MB 235.0, MIL-L-2105D, Volvo 97310 & 97316, Voith 3.325.339, and MAN 342 M-1.

RORED HDA 90 is especially approved with Mercedes Benz 235.0

RORED EPA SERIES comply with API GL-4, MAN 341 E-1, MAN 341 Z-1, ZF TE-ML 02A and Mercedes Benz Sheet 235.1 requirements

RORED EPA 90 is especially approved with Mercedes Benz 235.1

TINGKATAN MUTURORED HDA SERIES memenuhi persyaratan kerja dari API GL-5, MB 235.0, MIL-L-2105D, Volvo 97310 & 97316, Voith 3.325.339, dan MAN 342 M-1.

RORED HDA 90 telah mendapatkan approval Mercedes Benz 235.0

RORED EPA SERIES memenuhi persyaratan kerja API GL-4, MAN 341 E-1, MAN 341 Z-1, ZF TE-ML 02A dan Mercedes Benz Sheet 235.1

RORED EPA 90 mendapatkan approval Mercedes Benz 235.1


Characteristics Test Methods ROREDHDA 90

ROREDHDA 140

RORED HDA75W-90

RORED HDA80W-90

RORED HDA85W-90

RORED HDA85W-140

SAE Viscosity Grade 90 140 75W-90 80W-90 85W-90 85W-140

Density at 150C, kg/l ASTM D - 4052 0.9001 0.9054 0.8970 0.8986 0.9001 0.9053



183.3017.02

412.3228.45

112.0017.25

146.6014.68

210.0318.83

403.8428.11

Viscosity Index ASTM D - 2270 98 96 169 99 100 96

ASTM Colour ASTM D - 1500 Green Green L 1.0 L 2.5 L 2.5 2.5

Flash Point, 0C ASTM D - 92 237 249 180 205 205 213

Pour Point, 0C ASTM D - 5950 -24 -9 -45 -35 -24 -24


Characteristics Test Methods ROREDEPA 90

ROREDEPA 140

RORED EPA75W-90

RORED EPA80W-90

RORED EPA85W-90

SAE Viscosity Grade 90 140 75W-90 80W-90 85W-90

Density at 150C, kg/l ASTM D - 4052 0.8960 0.9043 0.8899 0.8936 0.8971



193.5017.45

429.6028.74

110.9017.35

143.6014.52

208.3118.34

Viscosity Index ASTM D - 2270 97 94 172 99 97

ASTM Colour ASTM D - 1500 L 3.0 L 4.0 0.5 L 2.5 L 2.5

Flash Point, 0C ASTM D - 92 237 238 194 210 223

Pour Point, 0C ASTM D - 5950 -18 -9 -45 -35 -20

Turbolube Series are high performance quality turbine oil formulated from highly refined base oils and premium rust and oxidation inhibitor package.

Turbolube Series adalah pelumas turbin yang memiliki kualitas tinggi, diformulasikan dari base oil dan aditif rust dan oxidation inhibitor bermutu tinggi.

SUPERIORITIESTurbolube Series exhibits superior oxidative and thermal stability, leading to prolonged service life without the formation of harmful sludges under high temperature operating conditions.

Turbolube Series offers superior protection against the rusting and corrosion of metal surfaces.

Turbolube Series are a premium quality rust and oxidation inhibited formulation that has multipurpose capability for a wide range of industrial applications for which this type of product is recommended. This feature enables lubricant inventories to be rationalized, thereby reducing the possibilitiy of using the wrong lubricant for a given application.

KEUNGGULANTurbolube Series memiliki kestabilan oksidasi dan termal yang tinggi, sehingga umur pemakaian pelumas dapat diperpanjang tanpa terjadi pembentukan sludge dalam kondisi operasi bertemperatur tinggi.

Turbolube Series memberikan perlindungan optimal terhadap karat dan korosi pada permukaan metal.

Turbolube Series diformulasikan dari aditif rust dan oxidation inhibitor bermutu tinggi sehingga dapat digunakan pada berbagai macam aplikasi industri yang membutuhkan pelumas jenis ini. Kemampuan ini memungkinkan rasionalisasi dari inventori pelumas pada industri, dan dapat mengurangi kemungkinan salah pengaplikasian pelumas.

PERFORMANCE LEVELSTurbolube Series meet the requirements of MAG Cincinnati Machine P-38, P-55, P-54 and P-57, GEK-3268F, Solar Turbines ES9-224, U.S. Military MIL-H-17672D, DIN 51524 Part I, Hagglunds Denison HF-1 and HF-0.

Turbolube 32 and Turbolube 46 has been approved by Siemens (TLV 901304)

TINGKATAN MUTUTurbolube Series memenuhi persyaratan dari MAG Cincinnati Machine P-38, P-55, P-54 and P-57, GEK-3268F, Solar Turbines ES9-224, U.S. Military MIL-H-17672D, DIN 51524 Part I, Hagglunds Denison HF-1 dan HF-0.

Turbolube 32 and Turbolube 46 memiliki approval Siemens (TLV 901304)

APPLICATIONSTurbolube Series are recommended as the lubricant for steam and water turbines and many gas turbines which require superior mineral lubricant.

Turbolube Series also be recommended for use in machine tools, vacuum pumps, air compressors, hydraulic systems, bearings (plain and antifriction), etc. that require antiwear properties.

PENGGUNAANTurbolube Series direkomendasikan untuk digunakan sebagai pelumas pada steam dan water turbin, juga pada beberapa gas turbin yang membutuhkan pelumas dengan base oil mineral berkualitas tinggi.

Turbolube Series juga direkomendasikan untuk digunakan pada peralatan mesin, pompa vakum, kompresor udara, sistem hidrolik, bearing (plain dan antifriction) yang membutuhkan sifat antiwear.


Characteristics Test Methods TURBOLUBE 32

TURBOLUBE 46

TURBOLUBE 68

TURBOLUBE 100

TURBOLUBE 150

TURBOLUBE 220

SAE Viscosity Grade 32 46 68 100 150 220

Density at 150C, kg/l ASTM D - 4052 0.8569 0.8644 0.8799 0.8755 0.8813 0.8908



31.945.64

46.47.15

67.849.01

97.4611.27

149.814.85

21518.60

Viscosity Index ASTM D - 2270 116 114 107 102 98 96

ASTM Colour ASTM D - 1500 0.5 L 0.5 L 0.5 0.5 L 0.5 2.5

Flash Point, 0C ASTM D - 92 220 242 230 252 238 270

Pour Point, 0C ASTM D - 5950 -15 -18 -18 -36 -18 -9

NG Lube Series are high quality gas engine oil, which are suitable for engines of compression ignition and spark ignitied type using natural gas fuel.

NG Lube Series are designed to have excellent oxidation and nitration stability to prevent deposit formation, corrosion and scuffing and also neutralize acids from combustion process. this lubricant application will give an optimal protection for daily non-stop operating engines.

SUPERIORITIES• Very high resistance against nitration and oxidation• Prevent deposit formation in piston groove and undercrown

also at combustion chamber• Having optimum ash level (0.49% wt) to prevent wearing

out in valve and valve seat, which can cause valve guthering or torching

• Provide maximum protection against sparkplug fouling• Having low evaporation level and good compatibility with

various type of seal.

KEUNGGULAN• Ketahanan yang tinggi terhadap nitrasi dan oksidasi• Mencegah terjadinya deposit pada piston groove dan

undercrown serta ruang bakar• Memiliki tingkat kandungan abu yang optimum (0.49%

wt) untuk mencegah keausan pada valve dan valve seat yang menyebabkan terjadinya valve guttering atau torching

• Memberikan perlindungan maksimal terhadap sparkplug fouling.

• Tingkat penguapan yang rendah dan kompabilitas yang baik terhadap berbagai jenis seal.

PERFORMANCE LEVELSNG Lube Series have met API CF, Caterpillar, Waukesha and Dresser Rand Category III.

APPLICATIONSNG Lube Series can be applied to four stroke engines, either naturally aspirated or turbocharged type such as Caterpillar, Waukesha, Wartsila and Dresser Rand, which are operating as gas gathering rotary compressor, main line compressor station, generator set, co-generator, etc.

NG Lube Series can also be applied to dual fuel engines; using diesel fuel and natural gas for stationary application. NG Lube Series are not recommended for two stroke gas engine.

PENGGUNAANNG Lube Series dapat digunakan pada mesin 4 langkah baik jenis naturally aspirated maupun turbocharged seperti Caterpillar, Waukesha, Wartsila dan Dresser Rand, yang beroperasi sebagai gas gathering rotary compressor, main line compressor station, generator set, co-generator, dll.

NG Lube Series juga dapat digunakan pada mesin yang menggunakan bahan bakar dual fuel yaitu minyak diesel dan bahan bakar gas alam untuk aplikasi mesin stasioner. NG Lube Series tidak direkomendasikan untuk mesin dua langkah.

NG Lube Series adalah pelumas mesin gas bermutu tinggi yang dapat digunakan untuk mesin-mesin jenis compression ignition dan spark ignited yang menggunakan bahan bakar gas alam.

NG Lube Series didesain memiliki kestabilan yang sangat baik terhadap oksidasi dan nitrasi, mencegah terbentuknya deposit, mengatasi terjadinya korosi dan scuffing serta menetralisir asam hasil pembakaran. Pemakaian pelumas ini akan memberikan perlindungan yang optimal bagi mesin yang beroperasi non-stop setiap hari.

TINGKATAN MUTUNG Lube Series memenuhi tingkatan mutu API CF, Caterpillar, Waukesha dan Dresser Rand Category III.


Characteristics Test Methods NG LUBE 30 NG LUBE 40

SAE Viscosity Grade 30 40

Density at 150C, kg/l ASTM D - 4052 0.8834 0.8853



90.1610.8

132.514.38

Viscosity Index ASTM D - 2270 104 107

ASTM Colour ASTM D - 1500 L 7.5 L 7.5

Flash Point, 0C ASTM D - 92 254 262

Pour Point, 0C ASTM D - 5950 -15 -9

Total base Number, mg KOH/g ASTM D - 2896 4.55 4.61

Sulfated Ash, % wt ASTM D - 874 0.49 0.49

AUSTRALIAIndolubricants Australia Pty Ltd. (Sydney)1/8 Cunningham StMoorebank, Nsw 2170, AustraliaT. +61 2 96025353, F. +61 2 96025656E. [email protected]

Indolubricants Australia Pty Ltd. (Victoria)18 Commercial Drive, Lynbrook Vic 3975.

SINGAPORESky Oil & Gas Asia Pte. Ltd.Harbourfront Centre1 Maritime Square #10-32ASingapore 099253T. +65 62762445/ +65 90271542F. +65 62762664

NIGERIAHamerstone Nig. Ltd9 Grace Evangel Close, Canal EstOkota, Isoto, Lagos, NigeriaPIC. Mr. Clement OrakwueT. +234-8022231120

YAMANAl-HADHA Company for Trading& General AgenciesZubaiery Street - Near the Oil MinistrySana’a Republic of YamanT. 009671214694PIC. Mr. Ameen Ahmed Al-Hadha

OMANZubair AutomotiveP.O.BOX 800,P.C. 111,CPOSultanate Of Oman

NEPALRajesh AutomobilesBudha Margh-7, Dharan (Sunsari) NepalT. 00977 - 25520024E. [email protected]

TIMOR LESTEGracia Timor EnergyRua Kulu Hun 57 Dili, Timor LesteT. +67 0 7580234/ +62 8133055 8000F. +67 0 3322 420

SAUDI ARABIAArcomaP.O. Box 811, Jeddah 21421,Kingdom of Saudi ArabiaT. +966 26444212, F. +966 26448989PIC. Mr. Hamzah Al-Haddar([email protected])

BANGLADESHSAJ Engineering & Trading CompanyHouse No. 351 (5th Floor), Road No. 7Mirpur DOHS, Dhaka, BangladeshT. +880 2 9677628, 8616859, F. +880 2 9677625E. [email protected]

EUROPEPT Indonaldini Group - SwitzerlandVIA CIANI,16-6900 LUGANO -SWITZERLANDT. +41(0) 91 971 49 88/83, F. +41(0) 91 971 49 79W. www.indonaldini.com, E. [email protected] : Roland Beutler

DUBAIAl Saif Auto Spare Parts TR. LLCT. 0097165398818, F. 0097165398838P.O.BOX 31851SHARJAH, UNITED ARAB EMIRATESPIC : Emad

SOUTH AFRICAIndolube Pty. Ltd. T. 021 853 1320, F. 021 853 5965M. 082 555 8677 PIC : Mr Riaaz Jappe

MALAYSIAYasmin Jurumuda Sdn. BhdPusat Perdagangan Phileo Damansara 1,Block B, Unt 203, No. 9, Jalan 16/11,Off Jalan Damansara 46350Petaling Jaya, Selangor - MalaysiaT. +6 03 79584022, F. +6 03 79584011www.yasminholdings.com

THAILANDMN autoteam (Thailand) Co. Ltd.4 Soi Sukhumvit 62 Sec 10Sukhumvit Road, Bangjark, PhrakhanongBangkok 10260T. 0 2332 5836/ 0 742 7895, F. 02 3325837E. [email protected]

JAPANInoa Shouji Co. Ltd.Daiichi Shirakawa Building 2nd Floor3-23-6 Nishi Shinbashi, Minato-kuTokyo 105-0003, JapanT. +81 3 68092615, F. +81 3 68092619E. [email protected]

PHILLIPPINESFirst Indophil Oil Company, Inc.No. 38 Barangay 7 Poblacion Tanauan City, Batangas 4232 PHILIPPINEST. +63 2 403 0973, F. +63 2 659 4633E. [email protected]

MYANMARBest Luck Co. Ltd.No.82/A, Kyaikwine Pagoda Rd, Mayangone tsp, Yangon - Myanmar.T +95 1 652509

COUNTRY DISTRIBUTOR

Industrial Oil

Documents

Transcript of Industrial Oil