Industrial Filters - Specialty Plastics · 2017. 5. 24. · Industrial Filters 101 Lindenwood...
Transcript of Industrial Filters - Specialty Plastics · 2017. 5. 24. · Industrial Filters 101 Lindenwood...
APPLICATIONS
Filtration of galvanic baths (Nickel, Copper, Zinc, Chromium, Gold….)
Filtration of chemical products, process �uids and e�uents
Filtration and oil removal of pretreatment baths, degreasing baths, cleaning baths
Industrial Filters
www.specialty-plastics.com
101 Lindenwood Drive, Suite 225
Malvern • Pennsylvania 19355
T 484.875.3068 • F 484.875.9273
Flow rate (m3/h)
Filtration area
40
30
20
10
P Series Filters
L Series Filters
MADE WITH CORROSION-RESISTANT PLASTICS OR STAINLESS STEEL
EXCLUSIVE L-TECH / S-TECH PLEATED CARTRIDGE FILTRATION SYSTEM
FILTRATION AREA UP TO 430 Sq. Ft. (40 Sq. M.). LARGER FILTRATION AREA
FILTER GAUGE OF 0.2 TO 100 MICRONS
S Series Filters
Filters MC 15
Filters MC 10
J Series Filters
AVAILABLE UPON REQUEST
Industrial Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
FILTERING MEDIA
Flow rate
Water sediment loading
Paper �lter discs : For use with all chamber �lter units of diameter195/258/456 mm, a large choice of thin or thickpaper discs, polypropylene discs, non-wovenpolyester discs, PVDF discs and PTFE discs.
L-TECH pleated cartridges:
Polypropylene wound cartridges:Inexpensive versatile cartridge.Porosity grades from 1 to 50 microns.
Models Qty Qty x diam.(mm)Qty Height
Micro�bers canister capacity = 11.6 liters/ 700 grMicro�bers canister capacity = 11.6 liters/ 700 gr
Ions exchanger capacity = 3 liters
Ions exchanger capacity = 12 liters
Volume (l) Volume (l)Filtration area (m2)
Filtrationarea (m2)
FILTER PUMPS FILTERING MEDIA
Maximum�ow (m3/h)
L-TECH / S-TECHCartridge
STD Cartridge Plates Activatedcarbon canister
Dissolvingtank
MC4 - MC10MC15
J15L20L30L50
L51 - L59L52 - L58L81 - L89L82 - L88
J30J50
S50 - S50EP50 - P50E
P51 - P51E
P52 - P52E
H50H51R3
R12
M7M15 - M50
T50M15 - M50
M50M50 - M70
M100 - M250M140 - M250M140 - M250M200 - M250
T50 - T140T70 - T200
M100 - M290M140 - M250
M290 - M390 A27 - A30
M290 - M390 A27 - A30
M50M100
M7M15
0.371.5 - 4
2.31.5 - 4
44 - 5
9 - 1811 - 1811 - 1815 - 183.5 - 9.25 - 10.29 - 26
13 - 23
25 - 36
26 - 38
49
1112
1124
4
8
11 - 2
1
777
147
1477
1236
36
92
4"-10"10"-20"10"-20"
10"20"20"20"30"30"10"20"20"20"
10''-20"
10''-20"
20 x 19532 x 19564 x 19564 x 195
128 x 19596 x 195
192 x 19532 x 19564 x 19560 x 25854 x 456
54 x 456
102 x 456
5.811.611.6
11.6 x 217.3
17.3 x 25.8
11.611
11.6 x 4
11.6 x 4
11.6 x 8
16161616
30100
100
100
2.555
10
2.55
1020
20
40
0.45 0.72 1.44 1.44 2.88 2.16 4.32 0.72 1.44 2.9 7.8
7.8
15.6
Designed and manufactured by SIEBEC, this high-capacity cartridge (180 mm diameter) � ts as standard to SIEBEC L, S and P � lters and covers a wide range of industrial applications. Washable and re-usable. Porosity grade from 0.2 to 100 microns.
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
P 50
Made of injected plastic–Polypropylene (PP)reinforced with fiberglass
High resistance to acids and bases.Max. �uid temperature =
Filtration on L-TECH pleated cartridges 4 washable cartridges with a very large �ltering surface (20 m2)Low operating costsFilter gauge from 0.2 to 100 microns
Choice of optional, interchangeable �ltrationsystems
Filtration on paper with 27 or 54 discs 456 mm diameterFiltration on 36 wound or spun-bonded 20’’ cartridges
Choice of magnetic or mechanical drive pumps Flow rates of 12 to 38 m3/h
Modular design Very high-capacity double chambered version (until 40 m2 ofthe �ltration area)
Versions with high capacity dissolving tank Allows the addition of additives, the salt dissolution or the useof �ltration agents and activated carbon powder
Optional activated carbon canister,interchangeable with the L-TECH cartridge
Granulated activated carbon treatment
Optional canister micro�ber PP interchangeable with L-TECH cartridges
Oil removal from pretreatment bath, degreasing bath.
P 51 with canisters P 51 with L-TECH cartridges
High capacity �lters
160ºF (70ºC) Polypropylene
P Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
Made of injected plastic-Polypropylene (PP) reinforced with �berglass
Great resistance to acids and basesMax �uid temperature =
Filtration on S-TECH pleated cartridges 2 washable cartridges with a very large �ltering surface (10m2)Low operating costFilter gauge from 1 to 50 microns
Choice of optional, interchangeable �ltration systems
Filtration on paper with 58 discs 258 mm diameterFiltration on 12 coiled or extruded 20” cartridges
Choice of magnetic or mechanical drivepumps
Flow rates of 9 to 26 m3/h
Versions with high capacity dissolving tank
Allows the addition of additives, the salt dissolution or the useof �ltration agents and activated powdered carbon
Option Carbotech system : Pre�ltration S-TECH/ activated carbon canister in series
Filtration and granulated activated carbon treatment in series (without any further adaptation piece)
S 50CARBO-TECHcarbon canister
Man
omet
ric h
ead
Flow rate (m3/h)
H.M.T.(m)
36 420
2
4
6
8
10
12
14
16
18
20
4 8 12 16 20 24 28 32
22
P51 / A30
S50 - P50 / M250
S50 - P50 / M140
S50 / M100
P51 / M290
Models P / S
S-TECHcartridges
160ºF (70ºC) Polypropylene
S Series Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
High resistance to acids and basesMax. �uid temperature =
Filtration on L-TECH pleated cartridge Washable cartridges with a very large �ltering surface (5 m2)Low operating costsFilter gauge 0.2 to 100 microns
Choice of optional, interchangeable�ltration systems
Filtration on paper with 20 to 96 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’/30’’ cartridgesFilter gauge from 1 to 50 microns
Choice of magnetic or mechanical drivepumps
Flow rates of 1.5 to 18 m3/h
Modular design Very high-capacity double-chambered version
Version with dissolving vat Allows the addition of additives or the use of�ltration agents and active powdered carbon
Option of activated carbon canister,interchangeable with the L-TECH cartridge
Granulated activated carbon treatment
L 51
Medium range �lters
L 30
Features Advantages
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
High resistance to acids and basesMax. �uid temperature =
Filtration on L-TECH pleated cartridge Washable cartridges with a very large �ltering surface (5 m2)Low operating costsFilter gauge 0.2 to 100 microns
Choice of optional, interchangeable�ltration systems
Filtration on paper with 20 to 96 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’/30’’ cartridgesFilter gauge from 1 to 50 microns
Choice of magnetic or mechanical drivepumps
Flow rates of 1.5 to 18 m3/h
Modular design Very high-capacity double-chambered version
Version with dissolving vat Allows the addition of additives or the use of�ltration agents and active powdered carbon
Option of activated carbon canister,interchangeable with the L-TECH cartridge
Granulated activated carbon treatment
L 51
Medium range �lters
L 30
160ºF (70ºC) PP, 230ºF (110ºC) PVDF
L Series Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Man
omet
ric h
ead
Manometric head (m)
Flow rate(m3/h)
0
2
4
6
8
10
12
14
16
18
20
0 2 4 6 8 10 12 14 16 18 20
L31-L51 / M100
L41-L51-L81 / M140
L51-L81 / M200
L51-L81 / M250
L20-L30-L50 / M50
L50 / M70
L Models
L 51 PVDF L 52
Carbon canister
Man
omet
ric h
ead
Manometric head (m)
Flow rate(m3/h)
0
2
4
6
8
10
12
14
16
18
20
0 2 4 6 8 10 12 14 16 18 20
L31-L51 / M100
L41-L51-L81 / M140
L51-L81 / M200
L51-L81 / M250
L20-L30-L50 / M50
L50 / M70
L Models
L 51 PVDF L 52
Carbon canister
L Series Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
Features Advantages
High pressure �lters
De-oiling module
Made of injected plastic-Polypropylene (PP)and FPM seals
High resistance to acids and basesMax. �uid temperature =
Fitted with a removable polypropylene canister (capacity 11.5 liters) �lled with a charge of 100% polypropylene micro�bers
The micro�bers develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 liters charge of micro�bers (around 0.7 kg) holds an average of 6 liters of oil.They are hydrophobic, and may be compacted and incinerated
Fitted with an automatically primed magnetic drive centrifugal pump
Servicing free. The �ow rates can be regulated from 0 to m3/h with the help of the outing valve.
Tank type L for 1 L-TECH cartridge Working pressure up to 10 bars, �ow rate up to 20 m3/h
Tank type P for 4 L-TECH cartridges Working pressure up to 7 bars, �ow rate up to 100 m3/h
L-TECH pleated cartridges 20’’ Large �ltering surface, porosity of 0.2 to 100 microns
Made of stainless steel 304 OR 316L Good resistance to corrosion
L Model
H50
P Model
Features Advantages
Features Advantages
High pressure �lters
De-oiling module
Made of injected plastic-Polypropylene (PP)and FPM seals
High resistance to acids and basesMax. �uid temperature =
Fitted with a removable polypropylene canister (capacity 11.5 liters) �lled with a charge of 100% polypropylene micro�bers
The micro�bers develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 liters charge of micro�bers (around 0.7 kg) holds an average of 6 liters of oil.They are hydrophobic, and may be compacted and incinerated
Fitted with an automatically primed magnetic drive centrifugal pump
Servicing free. The �ow rates can be regulated from 0 to m3/h with the help of the outing valve.
Tank type L for 1 L-TECH cartridge Working pressure up to 10 bars, �ow rate up to 20 m3/h
Tank type P for 4 L-TECH cartridges Working pressure up to 7 bars, �ow rate up to 100 m3/h
L-TECH pleated cartridges 20’’ Large �ltering surface, porosity of 0.2 to 100 microns
Made of stainless steel 304 OR 316L Good resistance to corrosion
L Model
H50
P Model
Features Advantages
Features Advantages
High pressure �lters
De-oiling module
Made of injected plastic-Polypropylene (PP)and FPM seals
High resistance to acids and basesMax. �uid temperature =
Fitted with a removable polypropylene canister (capacity 11.5 liters) �lled with a charge of 100% polypropylene micro�bers
The micro�bers develop a wide exchange surface and have a large capacity to hold fats and oils: a 11.5 liters charge of micro�bers (around 0.7 kg) holds an average of 6 liters of oil.They are hydrophobic, and may be compacted and incinerated
Fitted with an automatically primed magnetic drive centrifugal pump
Servicing free. The �ow rates can be regulated from 0 to m3/h with the help of the outing valve.
Tank type L for 1 L-TECH cartridge Working pressure up to 10 bars, �ow rate up to 20 m3/h
Tank type P for 4 L-TECH cartridges Working pressure up to 7 bars, �ow rate up to 100 m3/h
L-TECH pleated cartridges 20’’ Large �ltering surface, porosity of 0.2 to 100 microns
Made of stainless steel 304 OR 316L Good resistance to corrosion
L Model
H50
P Model
160ºF (70ºC) PP
Oil Extractors H Series
Stainless Steel Filters
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
Treatment mini-station for cutting oils
(whole oils and soluble oils) and
e�uents (washing, rinsing waters)
Multi-tank modular design Allows associating in-series several technologies : pre-�ltration on bags, �ltration on cartridges, oil-extraction, treatment on activated carbon or resins
With centrifugal pump or controlled volume pump Compatible with all viscosities, �ow rate of 2 to 10 m3/h
Fixed or �oating skimmer option Allows sucking up pollutants on the surface of baths
MP53
Fixed skimmer Floating skimmer
MP52D
Minipure
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
160ºF (70ºC) PP, 230ºF (110ºC) PVDF
160ºF (70ºC) Polypropylene
Filters MC Series
Filters J Series
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Features Advantages
MC 10 MC 15 - 1x10” MC 15 - 2x20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Great resistance to acids and basesMax. �uid temperature = PVDF version for chrome plating baths
Filtration on cartridges Coiled or extruded cartridgesFilter gauge from 1 to 50 micron
Magnetic drive pump Flow rates of 0.4 to 4 m3/h
Modular design Double-chambered versions, with in-line or parallel �ow
Features Advantages
MC 15 PVDF - 2x10”MC 15 - 2x10”
Vertical �lters
Low capacity �lter
Washable cartridges with a very large �ltering surface (5 m2) Low operating costsFilter gauge from 0.2 to 100 microns
Filtration on paper with 32 to 64 discs 195 mm diameterFiltration on 7 wound or spun-bonded 10’’/20’’ cartridgesFilter gauge from 1 to 50 microns
Flow rates of 1.5 to14 m3/h
No connecting pipes, no risk of leaks
J 15 - 20” J 50 - 20”
Made of injected plastic-Polypropylene (PP)or Polyvinylidene Fluoride (PVDF)
Filtration on L-TECH pleated cartridge(J30 /J50 models)
Choice of optional, interchangeable�ltration systems (J30 /J50 models)
Choice of vertical pumps
Designed to be mounted immersed inthe electrolyte
High resistance to acids and basesMax. �uid temperature =
Features Advantages
Electrolytic reclaimer of precious metals
Recovery from rinsing water of metal ions on exchange resin
Features Advantages
R 3 R12
Made of injected plastic-Polypropylene (PP) High corrosion resistance
Recovery of metal ions pulled by rinsing water over ion exchangers
A single run over the exchangers is usuallysu�cient
Pre-�ltering on a 30 micron cartridge Protects the exchangers from pollution bysolid particles or other impurities
Compact design with �lter and integrated recti�er
High capacity for the recovery of gold, palladium, ruthenium, silver, and copper down to concentrations less than 5 ppm
Patented captive cartridge Captive depositing inside a cartridge without metal loss
Low electric consumption Fast return on investment
Features Advantages
Electrolytic reclaimer of precious metals
Recovery from rinsing water of metal ions on exchange resin
Features Advantages
R 3 R12
Made of injected plastic-Polypropylene (PP) High corrosion resistance
Recovery of metal ions pulled by rinsing water over ion exchangers
A single run over the exchangers is usuallysu�cient
Pre-�ltering on a 30 micron cartridge Protects the exchangers from pollution bysolid particles or other impurities
Compact design with �lter and integrated recti�er
High capacity for the recovery of gold, palladium, ruthenium, silver, and copper down to concentrations less than 5 ppm
Patented captive cartridge Captive depositing inside a cartridge without metal loss
Low electric consumption Fast return on investment
Metal Reclaimers R Series
Electrum
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
REQUEST A QUOTE TODAY.
CALL 484.875.3068 OR EMAIL [email protected]
Your Engineering Plastics Experts
Our experts can provide complete solutions to your � uid handling problems. We are highly knowledgeable about the various types of engineering plastics available, and we can help you determine what materials or products are best suited for your speci� c process. We can manage the project for you, from start to � nish, or we can advise you on certain aspects of your project.
Complete Filtration Systems for Your Plating and Industrial Applications
Specialty Plastics SIEBEC offers Complete Molded Filtration Systems—made with PP or PVDF—featuring superior corrosion resistance for your plating and industrial applications. SIEBEC systems have provided solutions in applications for over 50 years worldwide.
SPP 1
5-009
v7
Our Expert Services Include:
• Product Selection
• Material Selection
• Specifi cation Assistance
• Engineering and Design
• Technical Support
• Plastics Testing
• Consulting Services
• Project Management
• Feasibility Studies
Reducing Cost of Ownership • Speedchange Assembly in 30 Seconds* • Re-Usable Filter Cartridges Magnetic Drive Pumps • Mechanical Drive Pumps • Vertical Pumps
caRtRiDGes • pUmps • FilteRs • eDUctoR NoZZles(Including high-capacity L-TECH pleated re-usable cartridges)
*Contact us for details.
Four-point Guarantee*
• Performance• Manufacturing• Satisfaction• Price
www.specialty-plastics.comREQUEST A QUOTE TODAY.
101 Lindenwood Drive, Suite 225 • Malvern • Pennsylvania 19355T 484.875.3068 • F 484.875.9273 • E [email protected]