Industrial Equipment Rental & Service

MICHIGAN’SONLY AUTHORIZED

WARRANTY SERVICE CENTER

Bending

VERSATILE• 1 shoe bends 1/2" to 2" EMT, IMC and Rigid conduit• Simple switching between vertical and horizontal

bending configurations

ACCURATE• Absolute encoder stops bending at precise angles• Digital pendant sets angle and

monitors process

RELIABLE• Solid state electronics rated for 1,000,000+ bends• Solid state system eliminates arcing and prevents

damage from temporary power loss

EFFICIENT• Save one hour with every move• All components pin to the table, reducing component

loss allowing convenient transport from site to site

MOBILE• Minimize material handling and repetitive

lifting with on-board storage• Fits through standard height doors 36" wide

ERGONOMIC• Waist-height bending for operator comfort

VERSATILE• Bend 1/2" to 2" RIGID/IMC/EMT

on 2 shoes

MOBILE• Lightweight, compact design for

easy jobsite portability

RELIABLE• Greenlee’s classic “triple-nickel”

electric bender, features simple relay controls for easy field repairs

Electric Bender

Classic Electric Bender for Conduit & Pipe

Mobile Bending Table

555C Series Electric Bender Shoe Guides

• No loose pieces• One time setup• Bend 1/2" to 2" on one shoe• Works with 555C electric conduit benders• Less lifting reduces operator fatigue

Rigid/IMC Shoe Group, 1/2" to 2"

EMT Shoe Group, 1/2" to 2"

Item #28008

Item #555C

Item #854DX

Item #881-MBT

Item #23803

SPEED• 8,000 lbs. pulling force to handle most

pulling jobs.

VERSATILE• Available with Mobile VersiBoom for

less than 2 minute, one person set-up, & 20' tall

• Available with floormount & chain mount for tighter spaces

Ultra Tugger® 8(UT8) Cable Puller: 8000 lb.

Crimper Compact Ratchet Cable Cutter

• 1000 kcmil (MCM) Maximum Use, 750 kcmil (MCM) Frequent Use

• Simple, one-hand operation• Compact – convenient for working in

tight places and stores easly in tool pouches

• Blade release allows blades to be opened in mid-cut

• Crimping Capacity: 8 AWG - 4/0 AWG Copper

• Color-coded, hexagonal rotating dies• Full cycle mechanism releases only

after full crimp cycle is completed

Ultra Tugger® 10 (UT10) Cable Puller: 10,000 lb.

SPEED• 2-Speed gear-motor enable 20% faster

pulling time• Shift from high-speed/low-load pulling to

low-speed/high-load pulling with a simple double-tap motion on the foot-pedal

VERSATILE• Available with Mobile VersiBoom for less

than 2 minute, one person set-up, & 20' tall• Available with floor mount

& chain mount for tighter spaces

HEAVY DUTY• Customized gear motor

specifically for heavy-duty cable pulling applicationand meet UL & cULsafety requirements

G3 Tugger® Cable Puller

Item #6806

Item #841AH

Item #6906

Item #G3

Cable Stripping Tool

• Aluminum Hand Bender Head with Handle for 3/4" EMT, 1/2" Rigid/IMC

• Superior, patented Site-Rite sighting system featuring cast-in, readable markings on the bender heads and a finish that provides for the best visibility in low-light

• Strong, stable square hook design

Hand Bender

• Single button operation• CAT IV 1000 V rated for maximum safety• Automatically shuts off after 5 minutes of

inactivity to extend battery life

Cable Pulling

Available with pulling rope when requested

• 3X faster set-up than competition - no loose pieces

• 20% faster than competition• 25% stronger than competition• Clamp easily adjusts for different sizes of

conduit• Right angle sheave safely keeps operators

out of direct line of pulls• Portable handle and wheels for increased

mobility around jobsites• Change tail length, pull direction, and angle

of pull with ease• Can hook on the back of a truck hitch• Customized motor with

circuit breaker specifically designed for cable pulling

Hand Tools

Capacity:• 8 AWG to 750 kciml• Intuitive Blade Design allowing for user to

maintain contact with the cable at all times• Cable jacket lifting edge• Blade lacerations comprise approximately 40% of all

recordable injuries on the jobsite.

Non-Contact Voltage Detector

FASTER. SAFER. EASIER®.

Item #G2090

Item #K09-2GL

Item #GT-12A

Item #760

Pulling Rope 1/2" x 600 ft pulling rope Item #4567/8" x 1200 ft pulling rope Item #34138

Hand Tools

1/2" x 2" Hydraulic Driver Punch Set

Quick Change Carbide Cutter Kit, 8PC

• Fast, easy and simple to operate• Compact design for field use on

construction sites and maintenance jobs• Punches 10 times faster than wrench method• Will also drive 751 Cable Cutter head• Can be used with most standard

round Slug-Buster® and Slug-Splitter SC® punches (not 1/2", 9/16", 5/8")

• Quick Change Arbor – change cutter heads with a simple push and turn

Specifications: • Application: Cut fast, accurate holes in stainless

steel, mild steel, iron, copper, brass, aluminum, fiberglass and plastic sheet up to 3/16" thick

• Cutting Edge: Tungsten Carbide Teeth• Hole Size: 6 sizes: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2"

Item #648 Item #CMI-600

Item #7306SB

INTELLI-PUNCH™ 11-Ton Tool

Dieless Crimping Tool Gorilla Press

6 Ton Dieless Crimping Tool

Clamp Meter

• Amperage Measurement: 60, 600 Amps AC+DC

• Measurement Category: CAT III 600V, CAT IV 300V

• Measures AC+DC current and DC microamps

• Tests continuity and diodes• Phase Sequence & Motor

Rotation tests• Peak-RMS measures motor in

rush current• Data hold• Two voltage detection modes -

non-contact or using a single test lead

Application:• Punch conduit size holes in mild steel, aluminum,

fiberglass and plastic• Capacity: 11-Ton• Capacity Mild Steel:

• 4" Conduit up to 10 gauge• 6" Conduit up to 14 gauge

• Capacity Stainless Steel: • 4" conduit up to 10 guage

• Intelligent Crimping System Technology includes a pressure sensor that monitors the crimping force of each crimp and provides the operator a visual and audible alert if the force is below specifications

• Tools automatically retract when the crimping cycle is complete

• Crimping Capacity: 4 AWG -1000 kcmil copper color coded lugs and splices, 6 AWG -1000 kcmil aluminum color coded lugs and splices 1000 kcmil

• Crimping Force 12.000 ton

• Safely install fittings without soldering or welding

• Saves time when performing multiple presses

• Secure grip for easy one-handed operation

• Enables quick exchange of pressing jaws

Capacity:• Copper #8 -500 kcmil (MCM)• Aluminum 1/0 - 350 kcmil (MCM)• Crimp Cycle Time: Max. 7 seconds• Crimping Force:

Variable 3-6 Ton (30-60Kn)• Estimated Cycles per Charge:

100-300 based on cable size

Item #LS100X11A

Item #EK12IDL11 Item #PSTLP-KIT001

Item #EK6IDL11

Item #540-12Fish Stix Kit 1/4" x 12'

• Highly visible green color rods can be easily threaded together

• 1/4" diameter fiberglass adds rigidity when connecting multiple sections

• 200 LBS maximum pulling strength• Two different threaded tips accommodate

various bundles of wire or cable

Our sales, repair, and customer service teams receivedextensive training from Greenlee for the fullline of products we offer.

MICHIGAN’SONLY AUTHORIZED

WARRANTY SERVICE CENTER

Industrial Equipment Rental & Service

MidlandTool.com • 877-44MIDLAND • SuperiorToolRental.com