Inductive Sensor Brochure UK

7/30/2019 Inductive Sensor Brochure UK

1/20

www.ifm.com/gb/ind

uctive

I

nductive

sensors

fluid sensorsand diagnostic

systems

bus,identification

and control systems

positionsensors

and objectrecognition

Application sensors.Inductive sensorsfor every application.


2/20

Unbeatable.

The sensing faceof a full-metal sen-

sor resists mechan-

ical stress such as

impacts much bet-

ter than a sensor

with a plastic sens-

ing face.

Perfect teamwork.

Connectors specifi-

cally tailored to theapplication com-

plete the range of

ifm electronic.

Unsusceptible to

interference.

The electronics of

the inductive ifm

sensors are distin-

guished by their

EMC stability to

the GENERIC stan-

dard and their

adherence to our

own high techni-

cal standards.

Ingress protection

in all applications.

An innovative,

consistent sealing

concept from the

sensor to the con-

nector ensures an

ideal protection

against ingress of

moisture.

Stainless andstrong.

Non-coated stain-

less steel housing

or innovative non-

stick coating con-

tribute to the cor-

rect function of

the full-metal sen-

sors.

Robust, ingress-protected and high quality.Inductive sensors and connectors.

Due to the special

installation of a

mechanical end

stop the O-ring is

always correctly

compressed and so

permanently main-

tains its sealing

function.

Resistant to shock

and vibrations.

With vibration-

protected locking

principle. Robust

and ingress-pro-

tected. Overpres-

sure impossible.


3/20

The unique application solution by ifm electronic,adjusted to your requirements.

Every application has itsown requirements asregards the sensors to beused. Temperature shocks,mechanical influences or

aggressive cleaning agentsare just a few of the possi-ble environmental influ-ences to which sensors aresubjected. ifm electronictherefore offers inductivesensors which have beendeveloped for special appli-cations.

Quality:Functional design, develop-

ment-related tests, produc-tion consistently certified toISO 9001 and automated100% final inspection guar -antee ifm quality withoutcompromise. All this underthe quality mark Made inGermany.

Close customer contact:Sales and application engi-neers offer advise andsupport in more than 70countries quickly, flexibly,individually.

Innovations:Customer-oriented furtherdevelopment of the pro-ducts is the goal of ifm.Reliable sensors and con-nectors adapted to theapplication constitute anunbeatable system which isunique on the market.

ifm electronic close to you!Stainless steel.

Food-grade and

resistant to

chemical

cleaning

agents.

Coatedstainless steel.

Non-stick coating

for welding appli-

cations.

PEEK.

Resistant to almost

all organic and

inorganic chemi-

cals. Ideal for

applications in the

food industry.

LCP.

Ideal for use in

machine tools:

flexible, oil-

resistant polymer

chain with

extremely high

tensile strength

and a high

melting point.

PBT.

With a good chem-

ical resistance to

many solvents. The

perfect material

for standard appli-

cations.

Duroplast.

The strong poly-

mer material

which cannot be

molten protects

the coil from the

penetration of

weld spatter.

The impact test

simulates the harsh

conditions in

metal-processing

applications. Im-

pacts and scratches.

The temperature

shock test verifies

the ageing resis-

tance by means of

fast temperature

changes.

The wire-brush

test simulatesthe cleaning of

weld slag.

The target of the

shock test is to

subject the sensors

to extremelyheavy shocks and

vibrations.

The right material for your application.

Harsh tests.

The test scenarios

specially devel-

oped by ifm arebased on real con-

ditions. The sen-

sors are tested

with regard to

their suitability for

the applications.

The sensors have

been subjected to

tests according tothe proximity

switch standard

DIN EN 60947-5-2

during their devel-

opment stage.


4/20

Extremely resistant tochemical influences and temperature shocks.

Tested to

extremes:

Market maturity is

ensured by a pro-

gramme of severe

tests: temperature

cycle, steam boiler,

vibration, shock

and temperature

shock tests.

For hygienicand wet areas

In hygienic and wet areas such as

the food industry, sensors are

subjected to extreme operating

conditions. The housing can be

permanently wetted with aggres-

sive cleaning agents. For steam

cleaning the sensors do not only

have to be absolutely ingress-

resistant but also resistant to

temperature shocks.

Another requirement is a food-

grade housing material.

The T series from ifm electronic

meets all these requirements.

Resistant: Temperature range up to

100 C trouble-free use in hot processes

or cleaning operations.

Ingress-protected: Protection rating IP 67 /

IP 68 / IP 69 K the full-metal sensors are

suited for extreme applications such as

high-pressure cleaning or permanently

wet environment.

Free from corrosion: Threaded body and

sensing face of high-grade stainless steel

or PEEK, therefore resistant to aggressive

chemical influences.

Identifiable: Lasered type label the

sensors can still be clearly identified evenafter several years.

Connection technology: ecolink EVT

the ideal connector for hygienic and wet

areas. High-quality PVC cables and

housing materials, high-grade stainless

steel coupling nuts and the high protec-

tion rating IP 67 / IP 68 and IP 69 K form a

sealed system together with the sensor.

90

0

60

30

High-pressure

cleaning /

IP 69 K test.

30-second cycle,

14 - 16 l water /

minute,

water 80 C

nductive sensors of the T series


5/20

The T series.

Connectors and splitter boxes Accessories

Type Description Orderno.

5 m PVC, M12, 4-pole, without LED EVT001




5 m PVC, M12, 4-pole, with LED EVT007


Angle bracket for type M30, stainless steel E10737

Mounting clip for type M12, st. steel (301S21) E11533

Mounting clip for type M18, st. steel (301S21)



E11534

Technical data inductive sensors




Sensing face: high-grade st. steel operating voltage 10...36 V DC

Type Sensingrange[mm]

Switchingoutput

Orderno.

DimensionsLength[mm]

3 f 3-wire PNP, no IFT240M12 / L = 60

M18 / L = 70 5 f IGT247

M30 / L = 70 10 f IIT228

12 / L = 60 3 f 3-wire PNP, no IFT243*

M12 / L = 45 4 f 3-wire PNP, no IFT203

7 nf 3-wire PNP, no IFT200M12 / L = 50

M12 / L = 70 4 f 3-wire PNP, no IFT216

7 nf 3-wire PNP, nc IFT201M12 / L = 50

M12 / L = 45 4 f 3-wire PNP, nc IFT204

7 nf 3-wire PNP, no IFT217M12 / L = 70

M18 / L = 46 8 f 3-wire PNP, no IGT203

12 nf 3-wire PNP, no IGT200M18 / L = 51

M18 / L = 70 8 f 3-wire PNP, no IGT219

12 nf 3-wire PNP, no IGT220M18 / L = 70

M18 / L = 46 8 f 3-wire PNP, nc IGT204

12 nf 3- wire PNP, nc IGT201M18 / L = 51

M30 / L = 50 14 f 3-wire PNP, no IIT205

22 nf 3-wire PNP, no IIT200M30 / L = 50

3-wire PNP, no

3-wire PNP, no

no = normally open, nc = normally closed f = flush mountable, nf = non flush mountable* housing: metal sleeve 12

Sensing face: PEEK operating voltage 10...36 V DC

A full-metal sensor of the T seriesmonitors the valve positions in abrewery.


6/20

For industrialapplications

Extremely resistant tomechanical wear.

Tested to extremes:

Before the sensors

are mature for the

market they must

undergo a test

marathon to prove

their reliability:

vibration test, shock

test, wire-brush

test or impact test.

Sensors for the metal-processing

and automotive industries must

be tough and largely resistant to

mechanical stress.

The full-metal sensors of the

R series operate reliably even

after more than 500,000 impacts

and more than one million cycles

in the shock test.

The sensing face has a special

coating where weld spatter does

not stick. Ideal prerequisites for

reliable operation.

Insensitive: The special non-stick coating

allows weld spatter to roll off the sensor

and enables easy and quick cleaning.

Free from corrosion: Threaded body and

sensing face of high-grade stainless steel,

therefore protected against mechanical

stress.

Heat resistant: Thanks to the temperature

range of 0...85 C even critical tempera-

tures can be handled.

Identifiable: Lasered type label the

sensors can still be clearly identified even

after several years.

Connection technology: ecolink EVW

distinguished by their weld slag resistantnuts and cables. These special cables are

also suited for drag chains and torsional

movements. An unbeatable team togeth-

er with full-metal sensors of the R series.

ull-metal inductive sensors of the R series


7/20

Sensing face: high-grade st. steel, anti-adhesive coating operating voltage 10...36 V DC



2 m PUR, weld slag resistant, M12, 4-pole, without LED EVW001




2 m PUR, weld slag resistant, M12, 4-pole, with LED EVW007



E11533



E11534

Mounting clamp M12, PC E11047




Switchingoutput

Orderno.


4 f 3-wire PNP, no IFR200M12

L = 60

M18L = 70

6 f 3-wire PNP, no IGR200

M30L = 70

12 f 3-wire PNP, no IIR200

Technical data full-metal inductive sensors




The R series.



no = normally open, nc = normally closed f = flush mountable, nf = non flush mountable

When used in welding applications thefull-metal sensor of the R series reli-ably detects the position of the metaltarget and is resistant to weld spatterdue to its non-stick coating.


8/20

For electro-magnetic fields

Electromagnetic field immuneand correction factor 1.

Electromagnetic interference pro-

duced during resistance welding

can easily throw inductive sen-

sors off balance.

The sensors of the W series, the

electromagnetic field immune

application sensors, are protected

by a special coil structure.

In AC/DC and medium-frequency

welding systems the electromag-

netic field immune application

sensors guarantee high operation-

al reliability and plant uptime.

Insensitive: The safecoating allows weld

spatter to roll off the sensor and enables

quick and easy cleaning. The sensing faces

of the sensors consist of resistant Duro-

plast. The metal sleeves are PTFE-coated

in addition.

Constant correction factor 1: The new

sensors with correction factor 1 (K = 1)

have the same sensing range on all metals.

Ingress-protected: The protection rating

IP 67 guarantees complete protection

against contact with dangerous parts,

ingress of dust and temporary immersion

in water.

Connection technology: Weld slag resis -tant ecolink EVW connectors and sen-

sors of the W series. The ideal combina-

tion for welding applications.

sensing range in %

0 10 20 30 40 50 60 70 80 90 100

copper

copper, aluminium, brass, stainless steel, mild steel

brass

stainless steel

mild steel

aluminium

ifm sensor correction factor 1

Standard sensor

Correction factor 1 - comparison of sensing ranges

nductive sensors of the W series


9/20


The W series.Sensing face: Duroplast operating voltage 10...30 V DC K = 1


Switchingoutput

Orderno.


3 f IFW200M12 / L = 65

M12 / L = 65 8 nf IFW201

M18 / L = 65 5 f IGW200

40 nf 3-wire PNP, no IM512940 x 40 x 66

M18 / L = 65 12 nf 3-wire PNP, no IGW201

20 f 4-wire PNP,complementary

IM512440 x 40 x 66

M30 / L = 65 10 f 3-wire PNP, no IIW200

40 nf IM512640 x 40 x 66

M30 / L = 65 22 nf 3-wire PNP, no IIW201

40 x 40 x 66 20 f 3-wire PNP, no IM5119

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no

Cover material: PA Teflon-coated operating voltage 10...36 V DC K = 1







5 m PUR, weld slag resistant, 12, 4-pole, without LED EVW002









The electromagnetic field immune sen-sor of the W series detects the distan-ce between workpiece and fixture.


10/20

For oils andcoolants

Resistant to oilsand coolants.

Oils and coolants heavily

impact the machine components

installed in the machine tool

industry. Standard sensors are

insufficient in many applications.

The C series has been specially

designed for this industry

segment.

Wide product range: Robust full-metal

sensors, sensors with increased sensing

range, correction factor K = 1 (= same sens-

ing range on all metals) or K = 0 (= same

sensing range on brass and stainless steel).

Ideal for metalworking applications.

Free from corrosion: The threaded body

and the sensing face of the one-piece

housing of the full-metal sensors are

made of high-grade stainless steel. The

robust material allows installation of the

sensors in extreme applications.

Connection technology: Oil-resistant con-

nector ecolink EVC: highest operational

reliability by vibration protection with

end stop.

connectorcover

test chamber coolant

efector

heat oven

High tempera-

ture coolant test.

Endurance test for your peace of mind:

The application sensors for use in machine

tools are immersed in common oils and

lubricants in a test chamber for a type test

prior to series production.

The fluids are then heated to 80 C. Only

if the sensors withstand this type testundamaged and their sensing range does

not change are they released for series

production.

nductive sensors of the C series


11/20

The C series.


Switchingoutput

Orderno.


3 f 3-wire PNP, no IFC258M12 L = 60

M18 L = 70 5 f 3-wire PNP, no IGC248

M30 L = 70 10 f 3-wire PNP, no IIC224

Sensing face: high-grade st. steel operating voltage 10...36 V DC

2 f 3-wire PNP, no IE5381M8 L = 50

M8 L = 50 4 nf 3-wire PNP, no IE5382

M12 L = 45 4 f 3-wire PNP, no IFC204

7 nf 3-wire PNP, no IFC205M12 L = 50


12 nf 3-wire PNP, no IGC205M18 L = 51


M30 L = 50 22 nf 3-wire PNP, no IIC201

1.5 f 3-wire PNP, no IE5390M8 L = 65

M8 L = 65 4 nf 3-wire PNP, no IE5391

3 f 3-wire PNP, no IFC259M12 L = 65

M12 L = 65 8 nf 3-wire PNP, no IFC246


12 nf 3-wire PNP, no IGC233M18 L = 65


22 nf 3-wire PNP, no IIC219M30 L = 65

Sensing face: LCP operating voltage 10...30 V DC K = 1

Tested to

extremes:

A series of tests

qualified the full-

metal sensors for

use in harsh envi-

ronments: vibra-

tion test, shock

test, impact test

and coolant test.

Sensing face: LCP operating voltage 10...36 V DC

Sensing face: st. steel operating voltage 10...30 V DC K = 0 ferrous only

M12 L = 70 3 f 3-wire PNP, no IFC211



2 m black PUR, M12, 4/5-pole, without LED EVC001




2 m black PUR, M12, 4/5-pole, LED EVC007









Full-metal sensor of the C series devel-oped for use under extreme influencessuch as oils, coolants and vibration.




12/20

M series

For mobile vehicles

nductive sensors for mobile applications

Tested to

extremes:

The units pass salt

spray tests, temper-

ature / humidity

cycles, continuous

shocks and vibra-

tion without prob-

lems.

From construction machines to

municipal vehicles when used

in mobile vehicles, inductive sen-

sors are subjected to heat, cold,

moisture, dust and vibrations.

The inductive sensors of the

M series are reliable even in case

of extreme strain. Suitability for

mobile use is evidenced by the

e1 type approval of the

Kraftfahrt-Bundesamt (German

Federal Office for Motor Traffic).

Operational reliability: The increased sens-

ing range protects against mechanical

damage of the sensor.

Ingress-protected: The stainless steel

housing with the protection rating IP 67,

IP 68 or IP 69 K protects against diffusion.

Temperature: The sensors can be used at

-4085 C.

The units are moreover insensitive to fast

temperature changes.

Wide tolerance:A voltage range of

10...60 V compensates for high fluctua-

tions in the on-board system.

Connection technology: The oil- resistant

connector ecolink EVM. Highest opera-

tional reliability by vibration protectionwith end stop.

vibration frequency [Hz]

0 1000 2000100 1500

acceleration[g]

40

10

30

20

vibration test

standard sensor

Reliable in case of EMC interference,lowest temperatures and various weather conditions.


13/20

The M series.



Switchingoutput

Orderno.


4 f IFM205M12 / L = 70

M12 / L = 70 7 nf IFM206

M12 / L = 79 4 f IFM209

M12 / L = 79 7 nf IFM210

12 f 3-wire PNP, no IIM208M30 / L = 70

M18 / L = 70 8 f 3-wire PNP, no IGM204

22 nf 3-wire PNP, no IIM209M30 / L = 70

M18 / L = 70 12 nf 3-wire PNP, no IGM205

12 f 3-wire PNP, no IIM210M30 / L = 81

22 nf 3-wire PNP, no IIM211M30 / L = 81

M18 / L = 81 8 f 3-wire PNP, no IGM206

M18 / L = 81 12 nf 3-wire PNP, no IGM207

Sensing face: PBT operating voltage 1060 DC

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no

3-wire PNP, no



2 m black PUR, M12, 4-pole, without LED EVM001




2 m black PUR, M12, 4-pole , LED EVM0075 m black PUR, M12, 4-pole , LED EVM008



10 m black PUR, M12, 4-pole, LED EVM009





Mounting clamp M30, PC E11049Mounting clamp M18, PC E11048


On a container truck, two sensors formobile applications of the M series aredamped using a target.


14/20

For hazardousareas

Safe in hazardous areas.

Hazardous areas mean highest

demands for an application.

Whether explosion risk by dust

or gas:

With the application sensors

from ifm electronic you are on

the safe side. This is ensured by

the EC type test certificate for

the equipment categories 1 and 2

to EC directive 94/9/EC (ATEX).

The choice is yours:

From threaded and rectangular

housings to dual sensors for posi-

tion feedback on quarter-turn

actuators. Here as well, sensors

with increased sensing range are

available.

Connection technology: the connectors of

the ecolink EVCxxA series have the

EC type test certificate by DEKRA EXAM.

In accordance with the strict standard

requirements, they can be used in ATEX

areas of the categories 2D, 3D and 3G.

The units were tested to EN61241-0 table

5 for a low mechanical risk at 4 joules.

No additional mechanical protection is

required if no greater forces are to be

expected in the application.

Zone

Gas (G) Dust (D)

Equipment category

1 0continuously or for long

periods

2 1occasionally

in the normal range

3 2not in normal operation,

or only briefly andseldom

Classification equipment categories and zones for equipment group II

Presence ofexplosive

atmospheres

20

2122 (conductive

dust)

22 (non-conductive

dust)

nductive sensors with ATEX approval


15/20

The ATEX series.



Switchingoutput

Orderno.


NAMUR EN 60947-5-6 group II, category 1G / 2G, category 1D

M 18 / L = 33 8 nf NG5004

M 12 / L = 30 2 f NF5002

M 30 / L = 50 15 f NI501A

12 nf NG500AM 18 / L = 51

M 18 / L = 46 8 f NG501A

4 fConnection to

certifiedintrinsically safecircuits with the

maximumvalues

U = 15 V /l = 50 mA /

P = 120 mW, nc

NF501AM 12 / L = 45

2 f NS500228 x 10 x 16

M 12 / L = 30 4 nf NF5004

M 30 / L = 50 22 nf NI500A

7 nf NF500AM 12 / L = 50

5 f NG5002M 18 / L = 33

10 f NI5002M 30 / L = 41

15 nf NI5004M 30 / L = 41

4 nf NN500240 x 12 x 26

20 f NM500A40 x 40 x 66

40 x 40 x 66 35 nf NM501A

NAMUR EN 60947-5-6 group II, category 2G, category 1D

Connection tocertified

intrinsically safecircuits with the

maximumvalues

U = 15 V /l = 50 mA /

P = 120 mW, nc

Connectors and splitter boxes Switching amplifiers Accessories


N0031A

N0531A

N0533A

N0033A

N0530A

N0534A

10 m PUR, M12, 4-pole, without LED, Atex cat. 2D, 3D and 3G EVC06A



Switching amplifier, 24 DC, 1 channel, relay output

Switching amplifier, 230 AC (4565 Hz), 1 channel, relay output

Switching amplifier, 24 DC, 1 channel, transistor output

Switching amplifier, 24 DC, 2 channels, transistor output

Switching amplifier, 24 DC, 2 channel, relay output

8 f 3-wire PNP, no IGT20AM 18 / L = 46

M 12 / L = 45 4 f 3-wire PNP, no IFS20A8 f 3-wire PNP, no IGS20AM 18 / L = 46

20 f IM504A40 x 40 x 66

Group II, category 3D

Group II, category 3G, category 3D

M 18 / L = 51 12 nf 3-wire PNP, no IGS21A

40 x 40 x 66 40 nf IM503A

M 18 / L = 46 8 f 3-wire PNP, nc IGT21A

M 30 / L = 50 14 f 3-wire PNP, no IIT20A

M 30 / L = 50 22 nf 3-wire PNP, no IIT21A


Inductive sensors reliably detect theflap position in a flour silo. PNP

complementary

Switching amplifier, 230 AC (4565 Hz), 2 channels, relay output


16/20


Linear and continuousin the tenth-of-a-millimetre range.

Inductive analogue sensors are

used wherever control up to the

tenth-of-a-millimetre range is

required. Even smallest distance

changes are reliably detected

with sensors from ifm electronic.

All intermediate positions

between the adjustable start and

end values can be detected. The

linear output signal simplifies

further processing in the control-

ler. Monitoring and control of the

process is carried out via the

standard signals 420 mA or

010 V.

Types: The different types M12, M18, M30

and rectangular enable the ideal inte-

gration into your plant.

Repeatability: Due to innovative technicalsolutions the analogue sensors attain high

repeatability. Moreover a very small

linearity error ensures excellent quality of

the measuring circuit.

Temperature range: The extraordinarily

wide temperature range of -2580 C

enables the sensors to withstand other-

wise critical applications.

Connection technology: From factory

automation to the machine tool industry:

ecolink EVC. Highest operational reliabil-

ity by vibration protection with end stop.

nalogue sensors


17/20


Sensing face: PBT 3-wire 1530 V DC

Type Operatingrange[mm]

Analoguevalue

Output

Orderno.


0.22 f IF6028M12 / L = 70

M18 / L = 60 0.88 nf IG6083

M12 / L = 70 0.22 f IF6029

M12 / L = 70 0.44 nf 010 V IF6031

115 f 010 V IM514040 x 40 x 66

M18 / L = 60 0.88 nf 010 V IG6084

126 nf 420 mA IM514140 x 40 x 66

M12 / L = 70 0.44 nf 420 mA IF6030

126 nf IM514240 x 40 x 66

M18 / L = 60 0.55 f 420 mA IG6086

40 x 40 x 66 115 f 420 mA IM5139

420 mA

420 mA

010 V

M18 / L = 60 0.55 f 010 V IG6087

M30 / L = 70 1.015 nf 420 mA II5913

M30 / L = 70 1.015 nf 010 V II5914

M30 / L = 70 1.010 f 420 mA II5916

M30 / L = 70 1.010 f 010 V II5917

010 V













E11533



E11534




Sensing face: PA 3-wire 1530 V DC

The analogueseries.



no = normally open, nc = normally closed f = flush mountable, nf = non flush mountableAn inductive analogue sensor continu-ously detects the distance and, so, theposition of the eccentric.


18/20


Versatile and flexible.

In all automated processes

sensors are absolutely necessary

to provide the PLC with informa-

tion. This applies to factory auto-

mation, assembly or robotics as

well as to conveying, handling

and packaging technology.

Properties: With almost forty years of

experience in development and produc-

tion, ifm electronic offers a wide product

range of inductive standard sensors.

Types: The standard types M8, M12, M18,

M30 and rectangular as well as many

more support the ideal integration into

your application.

Connection technology:A lasting connec-

tion. With ecolink M12, ifm electronic

offers highly innovative connection tech-

nology. Even in bright lighting conditions,

a black-transparent housing makes the

LEDs much better visible than clear-trans-

parent versions. This is an important pre-

requisite to keep an eye on the plant pro-

cess all the time and to be able to act

quickly in case of problems.

temperature[C]

time intervals [h]

1

100

40

20

20

40

80

0

60

12 22 1

Sensors food / pharma

Sensors factory automation / machine tools /metalworking

1000 hour cycle test.

nductive sensors for factory automation


19/20

The standard range.

The vast range of standard sensors withconnectors and accessories can be quickly

and easily found using our productselector at:

www.ifm.com/gb/selectinductive

Inductive sensors of the rectangulardesign IMC detect the position of asteel bar during loading and unloadinga machine.

Inductive sensor detecting the positionof the check-valve in a paper factory.

Inductive sensor detecting theposition of a workpiece carrier.


20/20

marticleno.

7511312Wereservetherighttomaketechnicalalterationswithoutpriornotice.PrintedinGermanyo

nnon-chlorinebleachedpaper.11/08

Over 70 locations worldwide at a glance atwww.ifm.com

visit our website:

www.ifm.com

Position sensorsand object recognition

Inductive sensors

Capacitive sensors

Magnetic sensors,cylinder sensors

Safety technology

Valve sensorsPhotoelectric sensors

Object recognition

Encoders

Evaluation systems,power supplies

Connection technology

Fluid sensorsand diagnostic systems

Level sensors

Flow sensors

Pressure sensors

Temperature sensors

Diagnostic systems

Evaluation systems,power supplies


Bus systems

Bus system AS-Interface

Power supplies


Identification systems

Multicode reading systems

RF-identification systemsPower supplies


Control systems

Control systemsfor mobile vehicles


Overview ifm main catalogues:

ifm electronic gmbh

Teichstrae 445127 EssenTel. +49 / 0201 / 2 42 20

Fax +49 / 0201 / 2 42 22 00E-Mail: [email protected]

Inductive Sensor Brochure UK

Documents

Transcript of Inductive Sensor Brochure UK