InductIon · PDF fileDYNALUX- a division of Mule Lighting, Inc • 46 Baker Street...

InductIon LIghtIngspecIfIcatIon sheets

DYNALUX- a division of Mule Lighting, Inc • 46 Baker Street Providence, RI 02905 • 800 556-7690 P 401 941-2929 F • www.DYNALUXLIGHTING.com

project:fixture type:location:contact/phone:

DXWPB40 SERIES

Product SpecificsLight Source One 40 Watt Induction Lamp

Lumens 2800 Lumens

Color Temperature 5000K

CRI >80 (Ra)

Input Voltage 120 or 277 VAC, 50/60Hz

Fixture Weight 10 Lbs.

Rated Life 100,000 Hours

Warranty – Housing Components 2 Year Limited

Warranty – Lamp and Ballast 10 Year Limited

Ratings UL, CSA, CE, FCC, ISO, IP65

Model Lamp Volts Options

DXWPB40 IND40 120 = 120V PC1 = 120V Photocell

277 = 277V PC2 = 277V Photocell

Ordering Example: DXWPB40-IND40-120-PC1

Ordering Information Accessories** Field Installed

PC1 = 120V Photocell


**Order as a separate line item

5

10.375"

12.25"

7.375"

The BRAVO! Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, hotels and commercial buildings.

BRAVO! WALLPACK INDUCTION LUMINAIRE

Detailed Specifications

CONSTRUCTIONFeatures a durable, die-cast aluminum back housing with an architectural bronze powder coated finish, and a color-matched polycarbonate front housing. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by an impact-resistant, prismatic, polycarbonate refractor.

ELECTRONICSUtilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temperature of -25°C (-13°F), maximum operating temperature of 50°C (122°F).

LAMPS (Included)Available with (1) 40W round induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any vertical surface and features a hinged design for easy access to internal components. Can be wired to a 4’’ junction box, or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3

House Side Street Side

Distance In Units Of Mounting HeightValues Based On 10 Foot Mounting Height

.1.2

.5

1

2

5

1/2 Maximum Candela Trace Shown As Dashed Curve(+) = Maximum Candela Point



DXWPA15 SERIES

12˝

11 ˝

7 ˝

Product Specifics


DXWPA15 IND40 120 = 120V PC1 = 120V Photocell


Ordering Example: DXWPA15-IND40-120-PC1




WPA15WG = Wireguard


The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.

WALLPACK INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandal-resistant, borosilicate glass prismatic refractor.


LAMPS (Included)Available with (1) 40W rectangular induction lamp that provides 2800 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

Photometrics

Light Source One 40 Watt Induction Lamp

Lumens 2800 Lumens


CRI >80 (Ra)







0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.512




DXWPA25 SERIES

˝

˝

10 ˝

Product Specifics


DXWPA25 IND80 120 = 120V PC1 = 120V Photocell


Ordering Example: DXWPA25-IND80-120-PC1




WPA25WG = Wireguard


The Wallpack Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for parking areas, entrances, walkways, underpasses, loading docks, recreation areas, tunnels and commercial buildings.

WALLPACK INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, die-cast aluminum housing with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use. Enclosure and hardware are corrosion resistant. Features an internal, anodized aluminum reflector which provides ideal light distribution, and the lamp(s) are protected by a vandal-resistant, borosilicate glass prismatic refractor.



INSTALLATIONIdeal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points. Specifications are subject to change without notice.

Photometrics


Lumens 6400 Lumens


CRI >80 (Ra)







0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.51

2

5




DXWPR40 SERIES

Model Lamp Volts Style Housing Color Options

DXWPR40 IND40* 120 = 120V OF = Open Face BZ = Bronze PC1 = 120V Photocell

IND80** 277 = 277V GR = Grid Frame BK = Black PC2 = 277V Photocell

HC = Half Cutoff WH = White

Ordering Example: DXWPR40-IND40-120-HC-BZ-PC1*HC Unit Only**OF & GR Units Only

Ordering Information

15˝

˝

Accessories*** Field Installed



***Order as a separate line item

Product Specifics

The Wallpack Induction Luminaire utilizes a round design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for office buildings, schools, parking garages and commercial buildings.

DESIGNER WALL PACK INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white powder coated steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, borosilicate glass prismatic refractor.


LAMPS (Included)Available with either (1) 40W or (1) 80W round induction lamp that provides either 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any vertical surface and features a hinged design for easy access to internal components. Unit can be wired to a 4’’ junction box or surface mounted using 1/2’’ NPS conduit entry points.

Specifications are subject to change without notice.

Light Source One 40 Watt Induction Lamp One 80 Watt Induction Lamp

Lumens 2800 Lumens (1 x 40W) 6400 Lumens (1 X 80W)


CRI >80 (Ra)







Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2

5




DXVN40 SERIES

8 ˝

12 ˝

12 ˝

Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2


Product Specifics

The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, parking areas, manufacturing facilities, warehouses and canopy lighting.

VANDAL/CANOPY INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor.

ELECTRONICSUtilizes an electronic ballast, producing a high-frequency current, controlled by an integrated circuit (IC) chip allowing a power factor of up to 99%. Minimum operating temp of -25°C (-13°F), maximum operating temp of 50°C (122°F).


INSTALLATIONIdeal for mounting to any horizontal surface and features 1/2’’ NPT entry points for conduit access. Specifications are subject to change without notice.


Lumens 2800 Lumens


CRI >80 (Ra)








DXVN40 IND40 120 = 120V PC1 = 120V Photocell


Ordering Example: DXVN40-IND40-120-PC1




DXVN42 SERIES


DXVN42 IND80 120 = 120V PC1 = 120V Photocell


Ordering Example: DXVN42-IND80-120-PC1




VN42PC4 = Replacement Prismatic Lens

VNQM = Hinged Quick Mount Bracket***


***Mount Over Recessed Electrical Box or Use 3/4˝ NPT Stem for Pendant Mounting

1212 ˝

12 ˝

12 ˝

Product Specifics

The Vandal/Canopy Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for cold storage areas, walk-in freezers, meat packaging facilities, manufacturing facilities, warehouses, canopy lighting and parking garages.

VANDAL/CANOPY INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze or white powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, UV stabilized polycarbonate prismatic refractor.





Lumens 6400 Lumens


CRI >80 (Ra)






Ratings UL, CSA, CE, FCC, ISO

Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2

5




Model Lamp Volts

DXVNGL30 IND80 120 = 120V

277 = 277V

Ordering Example: DXVNGL30-IND80-120

Ordering Information Accessories* Field Installed

VNGL30PC = Replacement Lens

VNGL30PM = Pendant Mount**

*Order as a separate line item

** Includes Junction Box, Slide Plate, Locknut, & Hardware

16˝

11˝

˝

Photometrics

DXVNGL30 SERIES

Product Specifics

The DELUXE Garage Lighter Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, manufacturing facilities, warehouses canopy lighting and parking garages.

DELUXE GARAGE LIGHTER INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is listed for covered ceiling mount and includes corrosion-resistant hardware. Features a two-piece aluminum reflector, the upper can be removed to create an attractive up-light. The lamp(s) are protected by a UV stabilized, vandal-resistant, polycarbonate prismatic refractor. Wet Location Listed.



INSTALLATIONIdeal for mounting to any horizontal surface and includes a mounting plate for easy, hands-free wiring to any standard 4’’ junction box. Specifications are subject to change without notice.


Lumens 6400 Lumens


CRI >80 (Ra)







0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

12

5

10




DXVNGL40 SERIES

15˝

˝

Model Lamp Volts

DXVNGL40 IND80 120 = 120V

277 = 277V

Ordering Example: DXVNGL40-IND80-120


Product Specifics

The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.

VANDAL RESISTANT INDUCTION GARAGE LIGHTER


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor.





Lumens 6400 Lumens


CRI >80 (Ra)







VNQM = Hinged Quick-Mount Bracket

CPSPS = Swivel Pendant Mount (Square Box)

CPSPR = Swivel Pendant Mount (Round Box)

PMJB = Offset Pendant Mount J-Box

VNGL40PC = Replacement Lens

VNGL30PM = Pendant Mount**


Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2

5




DXTGL40 SERIES

15˝

˝


DXTGL40 IND120 120 = 120V PC1 = 120V Photocell


Ordering Example: DXTGL40-IND120-120


Product Specifics

The Vandal Resistant Garage Lighter Induction Luminaire is ideal for warehouses, cold storage, manufacturing facilities, garages, walkways, under passes, loading docks. This fixture gives out even illumination on both horizontal and vertical planes.

VANDAL RESISTANT INDUCTION GARAGE LIGHTER


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast hinged aluminum enclosure with an architectural textured powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, white steel reflector which provides ideal light distribution, and the lamp is protected by a vandal-resistant, polycarbonate prismatic refractor.



INSTALLATIONIdeal for mounting to any horizontal surface and features Easy-Hang Bracket that Fits Standard 4˝ Electrical Box, Allowing One-Person Installation. Specifications are subject to change without notice.

Light Source 120 Watt Induction Lamp

Lumens 9600 Lumens


CRI >80 (Ra)







Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1.2

.5

1

2

5

10




The Deluxe Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, and perimeters.

DXFL50 SERIES


Lumens 2800 Lumens


CRI >80 (Ra)


EPA Calculation .55






DELUXE 12” AREA/FLOOD INDUCTION LUMINAIRE

5.3" 12.4"

12.4"

15.6"Detailed Specifications

CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum 12” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features an internal, anodized aluminum reflector which provides ideal 7H x 7V general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.



INSTALLATIONIdeal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally.


Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

12

5


Model Lamp Volts Mounting Arms* Square Pole

Mounting Arms* Round Pole

Options

DXFL50 IND40 120 = 120V M6SS = 6” M6SR = 6” PC1 = 120V Photocell

277 = 277V M10SS = 10” M10SR = 10” PC2 = 277V Photocell

M12SS = 12” M12SR = 12” SF = Slip Fitter Mount

M18SS = 18” M18SR = 18” SB = Swivel Bracket

HD = Heavy Duty Direct Pole Mount

Ordering Example: DXFL50-IND40-120-M6SS-PC1*Luminaire comes standard with an M6SS Mounting Arm




SF = Slip Fitter Mount

SB = Swivel Bracket


FL50WG = Wireguard

FL50GS = Glare Shield

FL50LG = Clear Vandal Guard




DXFL70 SERIES




SB = Swivel Bracket


FL70WG = Wireguard



FL70BF = Full Baffle


7.5" 16.2"

16.2"



Lumens 6400 Lumens


CRI >80 (Ra)


EPA Calculation .86








CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum 16” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features three different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.



INSTALLATIONIdeal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.

Photometrics



Reflectors Options

DXFL70 IND80 120 = 120V M6SS = 6” M6SR = 6” BLANK = Standard PC1 = 120V Photocell

277 = 277V M10SS = 10” M10SR = 10” T5 = IES Type 5 PC2 = 277V Photocell

M12SS = 12” M12SR = 12” SF = Slip Fitter Mount



Ordering Example: DXFL70-IND80-120-M6SS-PC1*Luminaire comes standard with an M6SS Mounting Arm


0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2

5

10




DXFL90 SERIES




SB = Swivel Bracket


FL90WG = Wireguard



FL90BF = Full Baffle


10.5" 24"

24"


Product SpecificsLight Source 1 x 150 Watt Induction Lamp 2 x 150 Watt Induction Lamp 1 x 200 Watt Induction Lamp

Lumens 12000 Lumens (1 x 150W) 24000 Lumens (2 x 150W) 18000 Lumens (1 x 200W)


CRI >80 (Ra)


EPA Calculation 1.67








CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum 24” enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features Two different internal, anodized aluminum reflectors to provide ideal light distribution for any application, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.


LAMPS(Included)Available with either (1) or (2) 150W induction lamps that provide 12000 initial lumens per lamp or (1) 200W induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (RA), and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any surface and comes complete with 6’’ pole mount bracket (M6SS). Cover is hinged for easy access to lamp and internal components. Dark Sky compliant when mounted horizontally. Specifications are subject to change without notice.

Photometrics



Reflectors Options

DXFL90 IND150 120 = 120V M6SS = 6” M6SR = 6” WDE = Wide Angle PC1 = 120V Photocell

IND200 277 = 277V M10SS = 10” M10SR = 10” T5 = IES Type 5 PC2 = 277V Photocell

IND300** M12SS = 12” M12SR = 12” SF = Slip Fitter Mount



Ordering Example: DXFL90-IND150-120-M6SS-PC1*Luminaire comes standard with an M6SS Mounting Arm**2 x 150 watt Induction Lamp

Ordering Information Accessories*** Field Installed

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2

.5

1

2

5

10

20




DXAD20 SERIES

Model Lamp Volts Reflectors Options

DXAD20 IND40 120 = 120V BLANK = Smooth (Standard) PC1 = 120V Photocell

277 = 277V FLD = Flood PC2 = 277V Photocell

Ordering Example: DXAD20-IND40-120-FLD



PB1-AD20 = Pole Bracket (1) Fixture, Square Pole

PB2-AD20 = Pole Bracket (2) Fixtures at 180°, Square Pole

PBC2-AD20 = Pole Bracket Cover For Use With PB2-AD20





PBCAP-AD20 = Pole Bracket Cap For Use With PB Bracket w/o Covers


˝

16 ˝

12 ˝

Product Specifics


The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.

ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components.



INSTALLATIONCan be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets. Specifications are subject to change without notice.

Photometrics


Lumens 2800 Lumens


CRI >80 (Ra)







0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1.2

.51

2

5




DXAD40 SERIES


DXAD40 IND80 120 = 120V BLANK = Smooth (Standard) PC1 = 120V Photocell

277 = 277V FLD = Flood PC2 = 277V Photocell

Ordering Example: DXAD40-IND80-277-PC2




PB1-AD40 = Pole Bracket (1) Fixture, Square Pole







PBCAP-AD40 = Pole Bracket Cap For Use With PB Bracket w/o covers


Product Specifics

The Adjustable Area/Flood Induction Luminaire utilizes a soft-cornered design to provide excellent light distribution and an aesthetically appealing appearance. Ideal for storage areas, rail yards, loading docks, road lighting, parks, perimeters and site lighting.

ADJUSTABLE AREA/FLOOD INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant hardware. Features a choice of two internal, anodized aluminum reflectors which provide ideal general light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens. Adjustable housing swivels from 0° to 30°, allowing light to be aimed where needed. Housings have angle indicator for easy adjustments. Hinged design offers easy access to internal components.


LAMPS (Included)Available with (1) 80W rectangular induction lamp that provides 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO andalso meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONCan be wall mounted using included bracket, pole mounting brackets are optional, and are available in 1, 2, 3 and 4 fixture configurations. Decorative covers are also available for pole brackets.



Lumens 6400 Lumens


CRI >80 (Ra)







16 ˝

20˝

˝

Photometrics

012 2.253 3.75 45 675

4

3

2.75

2

1.75

1

0

1

2

3

House

Side

Street

Side

Distance In Units Of Mounting Heigh t

Values Based On 10 Foot Mounting Heigh t

.1

.2

.5

1

2

5

10

1/2 Maximum Candela Trace Shown As Dashed Curv e

(+) = Maximum Candela Poin t



DXKHU20 SERIES

Model Lamp Volts Reflectors Mounting Options

DXKHU20 IND80 120 = 120V ADJ = Adjustable PM = Pole Mount PC1 = 120V Photocell

IND120 277 = 277V WM = Wall Mount PC2 = 277V Photocell

Ordering Example: DXKHU20-IND120-277-ADJ-PM-PC2




KHU20GS = Glare Shield


Product Specifics

The Medium Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.

KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.


LAMPS (Included)Available with (1) 80W or (1) 120W rectangular induction lamp that provides 6400 or 9600 initial lumens per lamp respectively. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any surface and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access.

“Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries.


Light Source One 80 Watt Induction Lamp One 120 Watt Induction Lamp

Lumens 6400 Lumens (1 x 80W) 9600 Lumens (1 x 120W)


CRI >80 (Ra)


EPA Calculation .67






4.73" 22.83"

13.58"



DXKHU30 SERIES

Model Lamp Volts Reflectors Mounting Options

DXKHU30 IND200 120 = 120V T2 = Type II PM = Pole Mount PC1 = 120V Photocell

277 = 277V T3 = Type III WM = Wall Mount PC2 = 277V Photocell

T5 = Type V

Ordering Example: DXKHU30-IND200-277-T3-PM-PC2




KHU30GS = Glare Shield


Product Specifics

The Large Kitty Hawk Induction Luminaire provides an aesthetically pleasing addition to any roadway or parking lot. With its smooth, defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. The combination of form and function blend together to make the Kitty Hawk a premier area lighting fixture.

KITTY HAWK PARKING/AREA INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum enclosure with an architectural bronze powder coated finish. Enclosure is fully sealed and gasketed, and is Wet Location Listed for outdoor use and includes corrosion-resistant stainless steel hardware. Features an adjustable anodized aluminum reflector which provides ideal light distribution, and the lamp is protected by a high-impact, heat-resistant tempered glass lens.


LAMPS (Included)Available with (1) 200W rectangular induction lamp that provides 18000 initial lumens. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONIdeal for mounting to any wall surface or pole and comes complete with two bolt keyhole mounting. Snap action door latch allows for tool-less access.

“Dark Sky” Friendly Full cut-off. International Dark Sky Association Seal of Approval for Dark Sky friendly, full cut-off luminaries.



Lumens 18000 Lumens


CRI >80 (Ra)


EPA Calculation .87






4.73" 22.83"

13.58"



DXCH40 SERIES

Model Lamp Options

DXCH50 IND40 NTLR = NEMA Twist-lock Photocell Receptacle

IND80

Ordering Example: DXCH40-IND80-120-NTLR


Product Specifics

The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.

COBRAHEAD INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘tool-less’’ access clips.


LAMPS (Included)Available with (1) 40W or (1) 80W rectangular induction lamp that provides 2800 or 6400 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONAccepts a 2’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.

Light Source 40 Watt Induction Lamp 80 Watt Induction Lamp

Lumens 2800 Lumens (40W) 6400 Lumens (80W)


CRI >80 (Ra)



EPA 1.4





Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2.5

1

2

5

10

20


14"

30.51"

7.87"



DXCH50 SERIES

Model Lamp Options

DXCH50 IND150 NTLR = NEMA Twist-lock Photocell Receptacle

IND200

Ordering Example: DXCH50-IND200-120-NTLR


Product Specifics

The Cobrahead Induction Luminaire combines style and elegance providing an aesthetically pleasing addition to any roadway or parking lot. With smoothly defined curves and highly functional optics that provide maximum lumen output while ensuring beam uniformity. Ideal for highways, roadways, parks, parking lots, public entrances, off-street areas and many other applications.

COBRAHEAD INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a smooth gray powder coated finish and internal ballast tray. Includes a specular aluminum relfector and molded sag glass lens. Hinged front frame includes stainless steel ‘‘tool-less’’ access clips.


LAMPS (Included)Available with (1) 150W or (1) 200W rectangular induction lamp that provides 12000 or 18000 initial lumens per lamp. The induction lamps have a 5000K color temperature, provide a CRI of >80 (Ra) and have a 100,000 hour rated life. Lamps and Ballasts are listed and certified by CE, FCC, UL, ISO and also meet the Electromagnetic Compatibility (EMC) standard.

INSTALLATIONAccepts a 2⅜’’ diameter mounting arm, and a hinged front frame secured with stainless steel clips. Specifications are subject to change without notice.

Light Source 150 Watt Induction Lamp 200 Watt Induction Lamp

Lumens 12000 Lumens (150W) 18000 Lumens (200W)


CRI >80 (Ra)



EPA 2.6





Photometrics

0 1 2 2.25 3 3.75 4 5 6 75

4

32.75

21.75

1

0

1

2

3



.1

.2.5

1

2

5

10

20


16" 11"

36.75"



DXHB11 SERIES

Model Lamp Volts Reflector Options

DXHB11 IND80 120 = 120V 22AL = 22” Aluminum LC3 = 3’ Cord

277 = 277V 22CR = 22” Acrylic LC3120 = 3’ Cord w/120V Straight Blade Plug

LC3120L = 3’ Cord w/120V Twist Plug


Ordering Example: DXHB11-IND80-277-22CR

Ordering Information Accessories*** Field Installed



CPMH3 = Malleable Hook w/ 1” NPT Threads

HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022)

HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)

HBWG22 = 22” Wire Guard (Requires CB50022)

HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022)

HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022)

CB50022 = 22” Tool-Less Clamp Band

CO50022 = 22” Collar for Acrylic Refractor

LC3 = 3’ Cord

LC3120 = 3’ Cord w/120V Straight Blade Plug



SFC500 = Safety Cable


101/2˝

91/2˝

9˝

Product Specifics

The High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.

HIGH BAY INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heat-dissipating fins or leaves the ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.



INSTALLATIONFeatures an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available. Specifications are subject to change without notice.


Lumens 6400 Lumens


CRI >80 (Ra)







Photometrics

323

646

970

1293

1

2

Maximum Candela = 1292.855 Located At Horizontal Angle = 0, Vertical Angle = 42# 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (42) (Through Max. Cd.)



DXHB51 SERIES

Product Specifics

The DELUXE High Bay Induction Luminaire is ideal for industrial and commercial environments like warehouses, gymnasiums, sports facilities, conventions and retail outlets. This fixture gives out even illumination on both horizontal and vertical planes.

DELUXE HIGH BAY INDUCTION LUMINAIRE


CONSTRUCTIONFeatures a durable, corrosion-resistant, die-cast aluminum ballast enclosure with a white powder coated finish. The ballast compartment features either external, heat-dissipating fins or leaves ballast core exposed to extend ballast life. Available with 22’’ spun anodized aluminum reflector or 22’’ prismatic acrylic refractor to provide smooth even illumination.



INSTALLATIONFeatures an easy-access wiring compartment, and comes complete with mounting hook. Optional pendant mount and line cord kits are also available. Specifications are subject to change without notice.


Lumens 18000 Lumens


CRI >80 (Ra)







1263

2527

3790

5053

1

2

Maximum Candela = 5053.23 Located At Horizontal Angle = 180, Vertical Angle = 22.5# 1 - Vertical Plane Through Horizontal Angles (180 - 0) (Through Max. Cd.)# 2 - Horizontal Cone Through Vertical Angle (22.5) (Through Max. Cd.)


DXHB51 IND200 120 = 120V 22AL = 22” Aluminum LC3 = 3’ Cord

277 = 277V 22CR = 22” Acrylic LC3120 = 3’ Cord w/120V Straight Blade Plug



Ordering Example: DXHB51-IND200-120-22CR


Photometrics



CPMH3 = Malleable Hook w/ 1” NPT Threads

HB11AR22 = 22” Replacement Aluminum Reflector (Requires CB50022)

HBACR22 = 22” Replacement Acrylic Refractor (Requires CO50022)

HBWG22 = 22” Wire Guard (Requires CB50022)

HBDL22 = 22” Prismatic Acrylic Drop Lens w/Gasket (Requires CB50022)

HBCL22 = 22” Prismatic Acrylic Conical Lens w/Gasket (Requires CB50022)

CB50022 = 22” Tool-Less Clamp Band

CO50022 = 22” Collar for Acrylic Refractor

LC3 = 3’ Cord

LC3120 = 3’ Cord w/120V Straight Blade Plug



SFC500 = Safety Cable


InductIon · PDF fileDYNALUX- a division of Mule Lighting, Inc • 46 Baker Street...

Documents

Transcript of InductIon · PDF fileDYNALUX- a division of Mule Lighting, Inc • 46 Baker Street...