INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC...

16
E-LINE FL/FLD DABLINE E-LINE DK E-LINE YDK E-LINE DL E-LINE FL/FLD DABLINE E-LINE DK E-LINE YDK E-LINE DL E-LINE KAP E-LINE SMART DECORATIVE LED LUMINAIRES SIMPLEX E-KABIN E-LINE KAP E-LINE SMART DECORATIVE LED LUMINAIRES SIMPLEX E-KABIN INDOOR INSTALLATION

Transcript of INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC...

Page 1: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Catalogue 24-Eng. / Rev 01 2000 Ad. 20/06/2016F.A.

EAE has full right to make any revisions or changes on this catalogue without any prior notice.

T E

ME 04

IEC 61439-6 s

EAE Elektrik A.S.Akcaburgaz Mahallesi,

3114. Sokak, No:10 34510Esenyurt - Istanbul - TURKEY

Tel: +90 (212) 866 20 00Fax: +90 (212) 886 24 20

www.eae.com.tr

EAE Aydınlatma A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEY Tel: +90 (212) 549 97 13

Fax: +90 (212) 549 37 90www.eaeaydinlatma.com.tr

EAE Elektroteknik A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEYTel: +90 (212) 549 26 39

Fax: +90 (212) 549 37 91www.eae-et.com.tr

EAE Teknoloji A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEYTel: +90 (212) 549 97 13

Fax: +90 (212) 549 37 90www.eaeotomasyon.com

E-LINE FL/FLD

DABLINE

E-LINE DK

E-LINE YDK

E-LINE DL

E-LINE FL/FLD

DABLINE

E-LINE DK

E-LINE YDK

E-LINE DL

E-LINE KAP

E-LINE SMART

DECORATIVE LED LUMINAIRES

SIMPLEX

E-KABIN

E-LINE KAP

E-LINE SMART

DECORATIVE LED LUMINAIRES

SIMPLEX

E-KABIN

INDOOR INSTALLATION

ISO 900114001

TALEN MM AN NO AR GI EV MNE E ND TN SA YY STI TL EA M

U SQ

Page 2: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

SINCE 1973...

EAE Group started its journey in the electricity industry in the factory located in Güngören when EAE Elektrik A.Ş. was established in 1973. As a result of the increasing demand for output capacity, production was moved to a modern facility in İkitelli in 1995. In 2001, the factories located in Esenyurt were put into operation, which substantially increased its production area.

The product development of all of the EAE Group of companies is carried out by the EAE in-house R&D Department.

The EAE Group has added strength to its professional staff in all areas of the business which now employs more than 2200 people. EAE is amongst the leading companies in the electrical products market.

The Group performs its activities in accordance with ISO 9001 Quality Management Standard and ISO 14001 Environmental Standard.The electrical devices the Group produces conform to world standards and are certied through tests conducted by KEMA and CESI labs.

INDOOR INSTALLATIONThis department was established within EAE Elektrik AS of the EAE Group at the beginning of 2014 specialising in electrical indoor installation equipment for the 't out' sector, offering new and alternative technical solutions.

Indoor installation meets the needs of the principle of 'package and complete solution'. The Indoor Installation Department offers full technical support and will work with the client to ensure the correct product selection and solution for their project.

• “FL/FLD” Indoor Busbar Trunking Systems; 32A (surface mounted)• “DABLINE” Raised Floor Power Distribution Systems; 63A – 80A• “DL” Multi-Conductor Lighting Busbar Systems (DL, DL-S, DL-DALI, DL-DIM); 25A - 32A - 40A• “KAP” Plug-in Busbar Distribution Systems; 40A – 63A• “DK” Screed and Raised Floor Ducting Systems, Junction and Service Outlet Boxes• “SMART” Multi-outlet Extension Blocks and Backbone DuctAs there products are meet their INDOOR INSTALLATION (Fit-Out) solutions and needs.

Indoor Installation Department next to you with qualied and experienced staff for your every need solutions and indoor installation products, design and project support, system and product selection in the elds.

In addition, all kinds of special product design and production needs required for your indoor installation solutions is also performed by our expert engineers of the department.

General Overview

Page 3: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

E DLLINE GROUPLighting & Low Power Distribution Systems

APLIKLEDWall Mounted LED Lighting Luminaires

Floor Panels

E FLLINE /FLDIndoor Busbar Trunking Systems

DABLINERaised Floor Power Distribution Systems

Multi-outlet Extension Blocks

E SMARTLINE

E DKLINEScreed and Raised Floor Ducting Systems, Junction and Service Outlet Boxes

PIRAMITLED Lighting Luminaires

Lighting Management System

Page 4: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

INDOOR SOLUTIONSINSTALLATION

A flexible, fuctional, safe, aesthetic structure, which puts an end to the accumulation of cables... E-LINE FL/FLD BUSBAR

Busbar ; 32A, 250VSocket ; 16A, 250VDifferent colour socket frames for mains power and UPSSingle phase, single circuit distribution; L/N/PE (3 conductors / FL-I)Single phase, double circuit distribution; L1/N1/PE + L2/N2/CE (6 conductors / FL-II)Cabling and socket mounting plates not required to distribute the power. (Mains/ UPS )

General Features

The combination of using the power distribution system and the cable duct section together (FLD ) gives a compact structure for power and data distribution needs.

The standard colour of E-LINE FL/FLD Busbar is white, If required, it can also be manufactured in different colours and coating as shown according to the room layout, wall and floor colour.

Busbar and Sockets

Standard length is 1 or 2m.Mains and UPS sockets with different frame colour optionsCut & extend facility at siteProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards

1. STEPFix the socketto FL busbar

2. STEP Turn the

socket by 90°

3. STEPSocket is

ready to use

Attention: The “ON” position must be aligned to the top edge of the FL busbar.

090

OPEN

CLOSED

The phase conductors are protected against finger contact and dust by using a screen system along the length of the busbar. The plug prevents the removal of the socket when it is plugged inspecial locking system.Special claw structure that prevents the outlet of dislocation.

Safety

ApplicationsOfficesHospitals

AirportsLaboratories

StoresWorkshops

UniversitiesTechnological Markets

E-LINE FL/FLDIndoor Busbar and Trunking Systems (32A)

90°

FL-I or FL-II busbar, when used in FLD Data channel (FLD-I), all the accessories should be selected accordingly.For further information, please consult the catalog and product selection.

Product Options

FL-I FL-II

FLD-I

65

57.3

9.5

55.8

28

65.6

40

44.8

150

9.555.8

45

57.3

9.5 65

Page 5: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

49

Certified according to IEC 61439-663A and 80A current capacity5+1 (housing) conductor optionHigh corrosion resistanceHousing : galvanised sheet steel painted RAL 7038Outlet Box with MCB (miniature circuit breaker) optionTap-offs rated up to 32ATin plated electrolytic copper conductorsPlastic housing feeder unitsGalvanised steel or plastic flexible conduitOutput plugs with address pinsHalogen free plastic up to 960C fire ratingAddressable tap-offs in different colours

General Features

Maximum height 49 mm

Can be used in 50 mm raised floor

Tap-off Box (32 A)

Tap-off Plug (13-16-32 A)

Product Types and Conductor Configurations

N L3 L2 L1 PE

3L+N+PE(Housing)Three-phase System

Yellow Series

2L+2N+CE+PE(Housing)Dual Busbar

N2CE L2 N1 L1 PE

Blue Series

NCE L3 L2 L1 PE

3L+N+CE+PE(Housing)Three-phase / Clean Earth

Lilac Series

X=

60

0

X=

60

0

X=

60

0

X=

30

0

X=

30

0

X=

30

0

DABLINERaised Floor Power Distribution Systems (63-80A)

Busbar Lenght (mm)

1200 2400 3000

2 3 4 7 5 9

Number of Plug-in Points

X=

30

0

X=

30

0

X=

30

0

Feeder Module

12 mm

Floor Support (Big)

Joint Module

Floor Support (Small)

Adjustable Bracket (Standard on busbar) 1200mm. / 5 peaces on busbar 2400mm. / 6 peaces on busbar 3000mm. / 7 peaces on busbar

Can use MCB (miniature circuit breaker) and / or fault current protection relays in plug-in box. In this case, raised floor height must be at least 15 cm. For further information and product selection, please consult the Dabline catalogue.

INDOOR SOLUTIONSINSTALLATION

Page 6: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Produced in accordance with EN 50085-2:2008 standard and has Type Test certificate from DEKRA. Underfloor (Screed) and Raised Floor Service Outlet Boxes; - Suitable for carpet, tile, ceramic and granite floors, - 4 different options either as plastic body or reinforced galvanised sheet steel, - From 3 modules to 24 modules outlet capacity options, - Modular type offering a large range of outlet options and accessories,Underfloor (Screed) Junction Box; - 10 different options with either galvanised sheet steel or aluminium body - Ability to adjust the height before and/or after screed is laid,Underfloor (Screed) Cable Ducts; - Two different height options at 25mm or 35mm, - 2000 mm standard length and 5 different width options as 120, 180, 215, 240 and 300 mm, - Wide range of options and accessories

General Features

E-LINE DKUnder-screed and Raised Floor Channel, Junction and Output Boxes

Duct Elbow Element

DKM-SK Junction Box

Duct Joint ElementDKM Service Outlet Box

DKM Lid Sheet Plate

DKM-S1 Junction Box

DKM-S2 Junction Box

Underfloor (Screed) Products

No modular structure within DKC outlet box; outlet boxes, 3 special types(mains-UPS) of energy with body and cover and 4 data&phone jack can be used.

(*)

Raised Floor Products

Service Outlet Boxes

Capacity (Modules)

EASYBOXDKYGrommet

24163

Width (w)

3

2

1

Height (h)

Underfloor Ducting Systems

240x35 mm (P) "Blow-up" type of under-screed cable channel,, used together with "DKA" type junction box.

215x25 mm under-screed cable channels, are specific to DKC, DKS, DKZ-V, DKZ and DKH junction boxes. Cannot used in other junction boxes.

EASYBOX is available with only 180x25 mm under-screed cable channel.

(*1)

(*2)

(*3)

Underoor (Screed)

Junction Box

Minimum Screed

Height (mm)

Maximum Height Adjustment (mm)

Before Screed After Screed

EASYBOXDKM-SDKM-ADKN-SDKN-ADKCDKSDKZ-VDKZDKHDKA

70

70

70

60

60

58

-

+20

+20

+25

+20

+20

+20+15+30+15+30-

+15

-

Service Outlet Boxes

EASYBOX

DKM

DKN

DKCDKCDKC---

Capacity (Modules)

24

16

24

(*)(*)(*)---

CARPET

TILE

CER

AMIC

GRANITE

Junction Boxes

EASYBOX

300240

240(P)180120300240215180120

3333233332

Trunks

A(mm)

35353535352525252525

H(mm) Part

DKM-SDKM-A

DKN-SDKN-A

DKC DKS DKZ-V DKZ DKH DKA

(*1)

(*2)(*3)

For further information and product selection, please consult the catalogue.

INDOOR SOLUTIONSINSTALLATION

Page 7: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

1- EASY BOX Suitable both screed and raised floor applications with steel and plastic junction box options. Total capacity is 24 modules.

262

282

262

282

min.70 Free space

in cover

10 mm

2- DKM Suitable screed floor applications with steel junction box option. Total capacity is 16 modules.

3- DKN Suitable screed floor applications with steel junction box option. Total capacity is 24 modules.

4 mm

4- DKC Suitable screed floor applications with steel or aluminium junction box options.

8 mm

Free space

in cover

5- DKY Suitable raised floor applications with. Total capacity is 16 modules.

Free spacein cover 8 mm

6- GROMMET Suitable raised floor applications with. Total capacity is 3 modules. This product is available for DKM/DKN junction box, cable outlet in screed floor applications and MCB needs.

Screed Floor Cable Duct

DKM / DKNJunction Box

Grommet

Outgoing cables to the table

Top Cover

EPDM Closure Outlet Cover

Power Socket (Mains / UPS)

Socket Plate

EPDM Closure

Data or Telephone Socket

Housing

Bottom Cover

E-LINE DKUnder-screed and Raised Floor Channel, Junction and Output Boxes

221221

198 198

297 297

270270

90

130 130

55

110

EASYBOX (24 Modules)

DKM (16 Modules)

DKN (24 Modules)

DKC (Special Structure)

DKY (16 Modules)

DKM-S1

DKN-S1

DKC-Type1

DKY

For further information and product selection, please consult the catalogue.

INDOOR SOLUTIONSINSTALLATION

Free space

in cover

10 mm

Page 8: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Compact modular structure designed and manufactured using fewer partsStructure that increases capacity from 16 to 24 modules with the same housingPossibility to use in the raised floor by adding a small part to the same body.Wide selection both screed and raised floor applications up to 24 of 8 modules with only 2 types of products. Possibility to use in all conditions thanks to 10 mm height of space inside coverWith a solid and rigid structure of the socket casingSuitable for different diameters and structures cables and fitted with aesthetics cable organizer for cable outletComplete security and solid cover structure with fully insulated steel reinforcement in the energy side

General Features

E-LINE YDK (New Series)Under-screed and Raised Floor Channel, Junction and Output Boxes

1- DK-MX1 250x250 Modular Service Outlet Box (h=70,5 mm)

Underfloor Service Outler Boxes

2- DK-MX2 146x250 Modular Service Outlet Box (h=70,5 mm)

3- DK-CX1 244x244 Stainless Steel Cover, CompactService Outlet Box, 16 Modules (h= 74 mm)

4- DK-CX2 320x244 Stainless Steel Cover, CompactService Outlet Box, 24 Modules (h=74 mm)

5- New Grommet 6 Modules (Ø 170 / h=70 mm)

6- Grommet 4 Modules, IP66 (Ø 182 / h=67 mm)

New Series

6 Modules Capacity Plate for MCB and/or RCD Galvanized steel junction box for

screed floor application

4 Modules Capacity Raised Floor Under-Screed

For further information and product selection, please consult the catalogue.

INDOOR SOLUTIONSINSTALLATION

Page 9: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

L1 L2 L3 3P

DL Busbar Systems are used in buildings and industrial plants on lighting and socket circuits where 25A, 32A or 40A Three-phase or Single-phase power is required.16A tap-off plugs and 25A tap-off boxes are specially designed to supply lighting and power socket circuits as per their specification.Produced in accordance with ISO 9001 standard and has been designed and tested according to the IEC 61439-1/6.All tap-off plugs are produced to be connected to the busbar in one direction to prevent the use of a wrong phase.The covers of the tap-off plugs are designed with different colours to indicate which phase they are connected to.The busbar conductors are plated with tin and coated in a flameproof insulating materialTransfer resistance is minimized due to busbar attachments outlet plug contacts plated with silver. The contacts of the busbar joints and the plug contacts are all silver coated to reduce contact resistance.

E-LINE DLLighting Circuits Power Distribution and Control Systems

DL Busbar Models

A Clean Earth CE option to include busbar tap-offs is available

1- DL Busbar

Single sided has 4 plug-in points on a standard 3 metre length

2- DL-S Busbar

For buildings where the lighting is to be controlled with DALI ballast lighting fittings

3- DL-DALI Busbar

3000

330 750 750 750 420

Sen

sor

and

Co

ntro

l S

ide

3000

330

330

750750750

750 750 750

420

420

Is used with motion sensors to dim or increase lighting levels when used with luminaires with corridor function ballast

3- DL-DIM Busbar

CE CE

PE(Housing)

PE(Housing)

CE

(PE Housing)

D1LEmergency

NEmergency

D2

(PE Housing)

K1

P

K2

N

K3

L1

L2

L3

N Mai

ns S

ide

54

34

54

34

L1

L2

L3

N

PE (Optional)

PE (Optional)

DL Busbar

DL-S Busbar

Please refer the catalogue for more detailed information, principle of connection diagrams and plug and outlet box options.

L1 L2 L3 3P

L1 L2 L3 3P

L1 L2 L3 3P

DL-DALI Busbar

DL-DIM Busbar

Double sided busbar has a total 8 plug-in points (4 on each side) on a standard 3 metre length

The DL Busbar can be produced with the desired number and configuration of conductors.

Can be used for energy (mains-UPS) distribution under raised floors

A Clean Earth CE option to include busbar tap-offs is available

Provides DALI ballast control and emergency kit supply at the same time from a single plug.

Can be produced with the busbar casing as earth or with a separate earth conductor ( not connected to the busbar body)

Can be produced with the busbar casing as earth or with a separate earth conductor ( not connected to the busbar body)

INDOOR SOLUTIONSINSTALLATION

General Features

Page 10: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Small power busbar range offers extremely economical solutions for the distribution of power in small enterprises and confection plants. Range is ideally suited to supply low power machinery such as sewing machines, hand tools and machine tools.Products are produced IEC-61439-6 standard and has DEKRA type test certificate. EAE products are manufactured in an ISO 9001 certified facility and to ISO 14001 environmental standard.Conductors are 40-63A electrolytic copper, tin plated and insulated along their full length with a self-extinguishing plastic sleeve. The standard busbar length is 3 metres with 4 plug in pointsProtection degree is Ip55.The busbar housing is manufactured from o.5mm galvanised sheet steel Tap-off plugs and boxes have silver plated sprung contacts which contact the busbar conductors on two surfaces

General Features

E-LINE KAPLow Power Distribution Busbar System 40-63 A

KAP Busbar Types

40

Current(A)

KAP 0405

KAP 0404

KAP 0403

KAP 0402

KAP 0605

KAP 0604

KAP 0603

KAP 0602

Types Conductor Conguration Phase Sequence

63

5

4

3

2

5

4

3

2

L1, L2, L3, N,

L1, L2, L3, N,

L2, N,

L2, N,

Housing + PE

Housing

Housing + PE

Housing

L1, L2, L3, N,

L1, L2, L3, N,

L2, N,

L2, N,

Housing + PE

Housing

Housing + PE

Housing

KAP Busbar Modules

End Feed Box (40-63 A)

Central Feed Box (40-63 A)

Flexible Elbow (40-63 A)

Feed Box (40-63 A)KAP Busbar Plugs and Boxes

KAP 16-FS16A Cylindirical FuseholdersSingle phase and Three-phase Tap-Off Plugs (L1/L2/L3) (5x20 mm Fuseholder)

KAP 32Empty Tap-off Box-Three-phase (L1,L2,L3,N,PE)Suitable for use up to 32A MCB. (with DIN Plate)

KAP 32-FSCylindirical Fuseholders Tap-Off Boxes Three-phase(L1/L2/L3/N/PE)(10x38 mm Fuseholder)

KAP 16-K16A with terminal, single phase and three-phase tap-off boxes (L1/L2/L3)

For further information and product selection, please consult the catalogue.

N

L1

L2

L3

35

55

3000

750

0 0 0 0

750 750375 375

INDOOR SOLUTIONSINSTALLATION

Page 11: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Non equipped or fully equipped versions with multi-extension outlet blocksare available.The design and structure the ELINE SMART range makes it suitable for use with all types of desks in offices and meeting roomsPower and low voltage sockets have optional large terminals for today's office needsModular structure and innovative design with anodized aluminium body and polycarbonate covers,8, 10, 12, 14, 16 and 18 modules are standard production capacity. Aesthetic and high performance special products in different sizes and with different accessories are available on request.

General Features

E-LINE SMARTMulti-Outlet Extension Blocks

SM-LUX I (Free Type)SM-LUX II (Fixed Type)

SM-LUX I SM-LUX II

SM-IN I (Rectangular Type)SM-IN II (Cylinder Type)

SM-IN I (Rectangular Type) SM-IN II (Cylinder Type)

SM-STD I (Free Type)SM-STD II (Fixed Type)

SM-STD I SM-STD II

SM-FLEX Backbone Canal

Cable collection system (organizer)Flexible and aesthetic solutionsHalogen Free raw materials

Standard Production Structure

8, 10, 12, 14, 16 and 18 modules are standard product contents capacity and color selections

Modules Sockets Colors

So

cke

t

Ho

usin

g

Main

s

UP

S

Data

Tele

ph

on

e

Elo

xal

Bla

ck

Wh

ite

8

10

12

14

16

18

14

16

18

20

22

24

1

2

2

3

2

3

2

2

2

3

4

4

1

1

2

1

2

2

1

1

2

1

2

2

Luxury type "face plate" is given such as data and telephone sockets. 22,5x45mmFor different socket types and quantities, please contact our company.MCB and/or RCD types are available.

The ELINE SMART range offers new products which are both aesthetic and functional for living and working environments.

For further information and product selection, please consult the catalogue.

INDOOR SOLUTIONSINSTALLATION

Page 12: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

EAE AYDINLATMALED Lighting Luminaires

Pendant and Surface Mounted Luminaires

Recessed Luminaires

Recessed Spotlights

Track Lighting

Wall Mounted Luminaires

Sevice Areas, Pools, Emergency

Exit Luminaires

Downled Giza

Recta Recta Led Solo

Rayled Padoc Mood

Garled Exit

AYDINLATMA

INDOOR SOLUTIONSINSTALLATION

Liso Direct Veno Pendont Neta Pendont

Pyramid

Alegre Wall Lamp Veno Wall Lamp Aplik Led Wall Lamp

VLX Led Waterproof

EAE Lighting Company is Illumination engineering and illumination aesthetic.

Lighting Illumination Level; Creating perfect combinations for comfortable vision and modern design in working environments.

Visual Comfort; A subject that must be addressed for office solutions

Presented Solutions by EAE Lighting; High illumination and optimum glare limitation High energy efficiency - Thermodynamic Management Suitability to environmental friendly buildings - Technological Structure Energy efficieny and short term pay back Suitable illumination level Attractiveness and high work performance

Advantages of LED luminaires: High efficiency lighting Long operational lifespan (maintenance free for a period of 20 years with an operational life of 50.000 hours.) Lower energy consumption and lower cost of air conditioning.

Page 13: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Use energy when necessary.

Simplex recognized in both residential and industrial areas, consistent with international standards, unlimited expandable, that can be flexible configured enough to meet customer's expectations and automation system supported by a large ecosystem indipendently of the main suppliers because of it uses open system protocols.

SIMPLEXLighting Management Systems

Use energy when necessary.

General Features

IPR100 KNX IP ROUTER

PD100 / MD100 Presence & Daylight Sensor

SBA204 Curtain / Blinds Module

PBP KNX Button

Ui108 KNX UNIVERSAL INTERFACE MODULE

TCU100 KNX THERMOSTAT

FCC102 FAN COIL

CONTROL UNIT

SW108 Switching(Relay) Module

DA100 KNX DALI GATEWAY

d�mmer

ON/OFF

TCP/IP LINE

KNX LINE

II

Use energy until needed.Use energy until needed.

Use energy when necessary.Use energy when necessary.

Use energy until needed.Use energy until needed.

INDOOR SOLUTIONSINSTALLATION

Page 14: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

E-Kabin E Series Distribution Switchboards are designed especially for indoor electrical installation applications for shopping centres, hotels, hospitalsetc. The E Series is designed to accept DIN-Rail mounting accessories.

E-KABINE-KABIN E Series Distribution Switchboard

General Features

E-Kabin O Series Enclosures are designed for general indoor electrical applications.

E-KABIN O Series Monoblock Enclosures

General Features

INDOOR SOLUTIONSINSTALLATION

Application

Protection Class

Type of Mounting

Framework

Paint

Colour

Glass

Operating Temperature

Operating Relative Humidity

Standards

:

:

:

:

:

:

:

:

:

:

Indoor, dry environment

IP 55, glass cover IP40

Wall-mounted

2 mm galvanized sheet steel

Epoxy - polyester powder paint

Standard RAL 7035

4 mm tempered safety glass

-5°C, + 40°C

+20°C' at %90 +40°C' at %50

IEC 61439-1, IEC 62208, IEC 60529, IEC 62262

Application

Protection Class

Type of Mounting

Paint

Colour

Operating Temperature

Operating Relative Humidity

Operational environmental conditions grade

Standards

:

:

:

:

:

:

:

:

:

Indoor, dry environment

IP 66

Wall-mounted

Epoxy - polyester powder paint

Standard RAL 7035

-5°C, + 40°C

+20°C' at %90 +40°C' at %50

IE32 however, maximum relative humidity 90% and lowest heat -5°C - EN 60721 -3 -3

IEC 61439-1, IEC 62208, IEC 60529, IEC 62262

Page 15: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

GERMANYAUSTRIA

AZERBAIJANBAHRAIN

BANGLADESH

BELARUS

BELGIUM

BRASIL

BULGARIA

U.KINGDOM

U. A. EMIRATES

ALGERIA CHINA

CZECH REP.

DENMARK

EQ. GUINEA

ESTONIA

ETHIOPIA

MOROCCO

FRANCE

FINLAND

GHANA

SOUTH KOREA

SOUTH AFRICA

CROATIA

INDIA

NETHERLANDS IRAQIRELAND SPAIN

SWITZERLANDITALY

ICELAND

CAMEROONQATAR

KAZAKHSTAN

KENYA

CYPRUS

KONGOKUWAIT

LATVIALIBYA

LITHUANIA

LEBANON

LUXEMBOURGHUNGARY

MADAGASKAR

MACEDONIAMALTA

EGYPTMAURITIUS

MYANMAR

NIGERIA

NORWAY

PAKISTANPERU

POLAND

ROMANIA

RUSSIA

RWANDASLOVENIA

SERBIA

SINGAPORE

SRI LANKA

SAUDI ARABIA

SUDAN

SYRIA

CHILE

TANZANIA

THAILAND

TAIWAN

TUNISIA

TURKMENISTAN

UKRAINE

OMANVIETNAM

YEMEN

GREECEAZERBAIJAN

OMAN

TURKEY

PAKISTAN

BELGIUMNETHERLANDSPOLAND

NETHERLANDS

BELGIUM

NORWAYSWITZERLANDVIETNAM

NIGERIA

KENYA

OMAN

YEMENOMAN

ETHIOPIA

TURKMENISTANTURKMENISTAN

SERBIASINGAPORE

U. A. EMIRATES

SUDAN

TANZANIA

CHILE

VIETNAMTURKMENISTAN

MADAGASKARSPAIN

U. A. EMIRATES

CAMEROONTHAILAND

CHILE

TURKMENISTAN

KUWAITSYRIA

ETHIOPIA

MADAGASKARTANZANIA

FRANCE

CAMEROON

SYRIA

U. A. EMIRATES

KENYA

LUXEMBOURG

FRANCE

UZBEKISTAN

PERUCHILESUDANOMANIRAQ

MADAGASKARLATVIA

QATAR

THAILAND

TURKEY

TURKEY

TURKEYTURKEY

TURKMENISTANMACEDONIA

IRELANDVIETNAMGHANA

CZECH REP.

BELGIUMU. A. EMIRATESSINGAPOREAZERBAIJAN

GREECE

SPAIN

U.KINGDOMCROATIA

NIGERIAQATAR

AUSTRIA

YEMEN SWITZERLANDSUDAN

RUSSIA

SOUTH KOREA

SYRIA

CAMEROON

GHANA

MYANMAR

NIGERIA

PERU

EGYPT VIETNAM

YEMEN

POLAND

VIETNAM

BULGARIA

TANZANIADENMARK

GREECE

VIETNAM

PAKISTANDENMARK

TAIWAN

MACEDONIA

AZERBAIJANSWITZERLAND

QATAR

SRI LANKANIGERIA

TURKEYPERU

SYRIAUZBEKISTAN

BULGARIA

NETHERLANDS

U. A. EMIRATES

GHANA

YEMENKAZAKHSTAN

GREECE

ESTONIAQATAR

BELGIUMAZERBAIJAN

SWITZERLAND

GHANA MADAGASKAR

MACEDONIA

SUDAN

RUSSIA MYANMAR YEMEN

VIETNAMKOREA

SLOVENIA

ALGERIA

ABKHAZIA

AFGHANISTAN

ALBANIA

ALGERIA

AUSTRALIA

AZERBAIJAN

BAHRAIN

BANGLADESH

BELARUS

BENELUX

BOSNIA AND

HERZEGOVINA

BULGARIA

CAMBODIA

CENT. AFRICAN REP.

CHILE

COLOMBIA

CONGO

CROATIA

CYPRUS

DENMARK

EGYPT

ESTONIA

ETHIOPIA

FINLAND

FRANCE

GEORGIA

GERMANY

GHANA

GREECE

GUINEA

HUNGARY

ICELAND

INDONESIA

IRAQ

ITALY

JORDAN

KAZAKHSTAN

KENYA

KOSOVO

KUWAIT

KYRGYZSTAN

LATVIA

LEBANON

LIBYA

LITHUANIA

MACEDONIA

MAURITANIA

MAURITIUS

MEXICO

MOLDOVA

MOROCCO

MYANMAR

NETHERLANDS

NIGERIA

NORWAY

OMAN

PAKISTAN

PALESTINE

PERU

POLAND

PORTUGAL

QATAR

ROMANIA

RUSSIA

RWANDA

SAUDI ARABIA

SERBIA

SINGAPORE

SLOVAKIA

SLOVENIA

SOUTH AFRICA

SPAIN

SRI LANKA

SUDAN

SWEDEN

SWITZERLAND

SYRIA

TAIWAN

TAJIKISTAN

TANZANIA

TATARISTAN

THAILAND

TUNISIA

TURKMENISTAN

U.A. EMIRATES

UKRAINE

UNITED KINGDOM

UZBEKISTAN

VENEZUELA

VIETNAM

YEMEN

EAE REFERENCES

Page 16: INDOOR INSTALLATION - EAE · PDF fileProduced in accordance with IEC 61439-6/IEC 61534-1/IEC60884-1 standards 1. STEP Fix the socket to FL busbar 2. ... IEC 61439-6 s INDOOR INSTALLATION

Catalogue 24-Eng. / Rev 01 2000 Ad. 20/06/2016F.A.

EAE has full right to make any revisions or changes on this catalogue without any prior notice.

T E

ME 04

IEC 61439-6 s

EAE Elektrik A.S.Akcaburgaz Mahallesi,

3114. Sokak, No:10 34510Esenyurt - Istanbul - TURKEY

Tel: +90 (212) 866 20 00Fax: +90 (212) 886 24 20

www.eae.com.tr

EAE Aydınlatma A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEY Tel: +90 (212) 549 97 13

Fax: +90 (212) 549 37 90www.eaeaydinlatma.com.tr

EAE Elektroteknik A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEYTel: +90 (212) 549 26 39

Fax: +90 (212) 549 37 91www.eae-et.com.tr

EAE Teknoloji A.S.Ikitelli Organize Sanayi Bolgesi

Ziya Gokalp Mahallesi,Eski Turgut Ozal Caddesi No: 20 34490

Basaksehir - Istanbul - TURKEYTel: +90 (212) 549 97 13

Fax: +90 (212) 549 37 90www.eaeotomasyon.com

E-LINE FL/FLD

DABLINE

E-LINE DK

E-LINE YDK

E-LINE DL

E-LINE FL/FLD

DABLINE

E-LINE DK

E-LINE YDK

E-LINE DL

E-LINE KAP

E-LINE SMART

DECORATIVE LED LUMINAIRES

SIMPLEX

E-KABIN

E-LINE KAP

E-LINE SMART

DECORATIVE LED LUMINAIRES

SIMPLEX

E-KABIN

INDOOR INSTALLATION

ISO 900114001

TALEN MM AN NO AR GI EV MNE E ND TN SA YY STI TL EA M

U SQ