INDEX

15-000

SECTION 15 - CUSTOM PROFILE FRAMES

GENERAL FRAME DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Section 11

PROFILE SELECTION GUIDE CCA, CRA, & CQA Hemmed Backbends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-100 CCB, CRB, & CQB No Backbends . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-101 CCC, CRC, & CQC Caulking Groove . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-102 CCD, CRD, & CQD Shadow Box Trim Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-103 CCE, CRE, & CQE Reverse Shadow Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-104 CRF Frame for Contraflam Glazing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-105 CMF Mullion for Above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-106 CCG, CRG, & CQG Splayed Trim. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-107 CRH Splayed Stop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-108 CCI, CRI, & CQI Stepped Rabbet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-109 CRJ Hemmed Stop (for Narrow Partitions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-110 CRK & CQK Flush Glazing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-111 CMK & CML Mullion for Above . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-112 CQN Rough Buck w/Slip Jambs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-113 CUO Center Glazed Entrance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-114 CRP, CCP & CQP Pocket Slide Door Frame. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-115 CCQ, CRQ, &CQQ 60˚ Flush Plaster Groove. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-116 CRR Backbend Returns (for installation “before drywall”) . . . . . . . . . . . . . . . . . . . .15-117 CRS & CQS as above for Flush Glazing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-118 CUT as above for Center Glazing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-119 SL1 & SL2 Sill Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-120 SL3 Sill Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-121 CP2 & CP2A Two Way Corner Post . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-122 CP3 & CP4 Three Way & Four Way Corner Posts . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-123 CPH & CPC Two Way Corner Post w/Closures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15-124

WELDED CORNERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Section 11HARDWARE PROVISIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Section 11ANCHORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Section 11

15-100

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

SERIES CCA, CRA & CQA PROFILESCUSTOM FRAMES

(D)

2"(F)

1-15/16"(K)

(L)

(D)

1-15/16"(K)

(L)

1-15/16"(K)

(D)

2"(F)5/8"(G)

2"(F)5/8"(G)

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

1/4" FOR 16 GA. 5/16" FOR 14 GA.THROAT DIMENSION PLUS 1/4" FOR 18 GA.D. DEPTH

C.

F. FACE

H. CORNER CONDITION

A. GAGE

CCA

CRA

CQA

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

3/4" MINIMUM

MASONRY

FIXED FLOOR

METAL STUD

WOOD STUD

ADJUSTABLE FLOOR

EXISTING OPENING

ANCHORS

WELDED IN

(Hemmed Return)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

18 (MAXIMUM SIZE 6070)

16 (MAXIMUM SIZE 100100)

14 (MAXIMUM SIZE 100100)

COLD ROLLEDASTM A60 GALVANIZED

3" TO 14"

4-5/8" TO 14"

DETERMINES OVERALL DEPTH

1" TO 5"

WELDED IN

WELDED IN

WELDED IN

WELDED IN

WELDED IN

SINGLE RABBET

DOUBLE RABBET

OPENING WIDTH DOUBLE

CUSTOM FRAMESSERIES CCB, CRB & CQB PROFILES

15-101

(D)

2"(F)

1-15/16"(K)

(L)

(D)

2"(F)5/8"(G)

1-15/16"(K)

2"(F)5/8"(G)

(D)

1-15/16"(K)

(L)

FINISH

E.

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F.

H. CORNER CONDITION

A. GAGE

CCB

CRB

CQB

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL (1-15/16" TO 4")

3/4" MINIMUM (16 AND 14 GAGE)

MASONRY

FIXED FLOOR

METAL STUD

WOOD STUD

EXISTING OPENING

ADJUSTABLE FLOOR

ANCHORS

WELDED IN

(Flat Trim on Masonry or Steel Framed Walls)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

WELDED IN

WELDED IN

WELDED IN

WELDED IN

WELDED IN

1-3/8" MINIMUM (12 GAGE)

COLD ROLLED

ASTM A60 GALVANIZED

DEPTH DOUBLE RABBET

FACE 1" TO 5"

SET UP AND WELDED

14

12

16

1/8" FOR 16, 1/8" FOR 14 GA.

THROAT DIMENSION PLUS 3/16" FOR 12 GA,

3" TO 14"

4-5/8" TO 14"

DETERMINES OVERALL DEPTH

SINGLE RABBET

DOUBLE RABBET

THROAT

OPENING WIDTH DOUBLE

SERIES CCC, CRC & CQC PROFILECUSTOM FRAMES

15-102

2"(F)

(D)

1/2"

5/8"(M)

1-15/16"(K)

(L)

(D)

2"(F) 5/8"(G)

2"(F) 5/8"(G)

(D)

1-15/16"(K)

1-15/16"(K)

(L)

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT:

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

CCC

CRC

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

WOOD STUD

EXISTING OPENING

ANCHORS

LOOSE

(Caulking Groove)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

12

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

WELDED IN

M BACKBEND 5/8"

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

3-3/8" TO 14" (12 GAGE)3" TO 14" (16 AND 14 GAGE)DEPTH SINGLE RABBET

DEPTH DOUBLE RABBET

1-7/16" LESS THAN DEPTH 12 GAGE1-3/8" LESS THAN DEPTH 16 AND 14 GAGE

FACE DIMENSION MUST BE LESS THAN DEPTH

1" TO 5" (16 AND 14 GAGE)

HEAD AND JAMB MUST BE EQUAL

1-1/4" TO 5" (12 GAGE)

3/4" MINIMUM (16 AND 14 GAGE)1-3/8" MINIMUM (12 GAGE)

WELDED INADJUSTABLE FLOOR

OPENING WIDTH DOUBLE

CQC

WELDED IN

SERIES CCD, CRD & CQD PROFILESCUSTOM FRAMES

15-103

(D)

5/8"(M)

5/8"

2"(F)

2"(F) 5/8"(G)

1-15/16"(K)

(L)

(D)

2"(F) 5/8"(G)

1-15/16"(K)

1-15/16"(K)

(L) (D)

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

CRD

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

ADJUSTABLE FLOOR

EXISTING OPENING

ANCHORS

LOOSE

(Shadow Box Trim Line)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

WELDED IN

M BACKBEND 5/8"

4-5/8" TO 14"3" TO 14"

DEPTH DOUBLE RABBET

1-3/8" LESS THAN DEPTH

3/4" MINIMUM

WELDED INWOOD STUD

1" TO 5"

FACE DIMENSION MUST BE LESS THAN DEPTH

HEAD AND JAMB MUST BE EQUAL DIMENSION

WELDED IN

DEPTH SINGLE RABBET

CCD

CQD

OPENING WIDTH DOUBLE

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-104

CUSTOM FRAME SERIES CCE, CRE & CQE PROFILES

(D)

2"(F)

1/2"

1/2"

5/8"

2"(F) 5/8"(G)

1-15/16"(K)

(L)

(D)

1-15/16"(K)

5/8"(G)

(L)

1-15/16"(K)

(D)

2"(F)

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

CCE

CRE

CQE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

ADJUSTABLE FLOOR

EXISTING OPENING

WOOD STUD

ANCHORS

LOOSE

(Reverse Shadow Box)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

WELDED IN

WELDED IN

M BACKBEND 5/8"

5-3/4" TO 14"5-3/4" TO 14"

DEPTH DOUBLE RABBET

2-1/4" LESS THAN DEPTH

3/4" MINIMUM

1" TO 5"

FACE MUST BE 1-1/4" LESS THAN DEPTH

HEAD AND JAMB MUST BE EQUAL DIMENSION

WELDED IN

DEPTH SINGLE RABBET

OPENING WIDTH DOUBLE

SERIES CRF PROFILE CONTRAFLAM/SUPERLITEII-45

CUSTOM FRAMES

15-105

DOOR

(L)

(D)1-5/8"

1-1/4"

1-1/4"(G)

(E)

1/2"

1/2"

(E)

(L)

(D)

1-15/16"(K)

2"(F) 5/8"(G)

1/2"

1/2"

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT

I. OPENING WIDTH SINGLE

2'-0" TO 9'-0"OPENING HEIGHT

1'-0" THRU 5'-0"3'-0" THRU 10'-0"

K.

L. SOFFIT

J.

RABBET

COLD ROLLEDMATERIALB.

ASTM A60 Galvanized

4-3/4" TO 10-5/8"D. DEPTH

C.

F. FACE

H. CORNER CONDITION

12

14A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

3-3/4" MINIMUM1" LESS THAN DEPTH

1-3/8" TO 2-3/4"

SINGLE 1-15/16" DOOR SIDE

SET UP AND WELDED

1-3/8" MINIMUM

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

ADJUSTABLE FLOOR

EXISTING OPENING

WOOD STUD

ANCHORS

WELDED IN

WELDED IN

WELDED IN

WELDED IN

LOOSE

WELDED IN

LOOSE

(Contraflam Glazing Frame)

ATTACHMENT

1-1/4" MINIMUM SIDELITE STOP DIMENSION5/8" DOOR STOP DIMENSION

OPENING WIDTH DOUBLE

SINGLE 3-1/8" TO 4" SIDELITE SIDE

CRF

For variations refer to the chart for limits.All dimensions shown are standard.

CRF

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-106

CUSTOM FRAMESERIES CMF PROFILE MULLION CONTRAFLAM/SUPERLITE II-45

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT

I.

2'-0" TO 9'-0"OPENING HEIGHT

K.

L. SOFFIT

J.

RABBET

COLD ROLLEDMATERIALB.

ASTM A60 GALVANIZED

4-3/4" TO 10-5/8"D. DEPTH

C.

F. FACE

H. INTERSECTION CONDITION

12

14A. GAGE

N/A

1-3/8" TO 2-3/4"

SINGLE 3-1/8" TO 4" SIDELITE SIDESINGLE 1-15/16" DOOR SIDE

1-3/8" MINIMUM

(Contraflam Glazing Frame Mullion)

1-1/4" MINIMUM SIDELITE STOP DIMENSION5/8" DOOR STOP DIMENSION

CMF

DOOR

BUTTED AND WELDED

WIDTH N/A

2"(F)

5/8"(G)

1-1/4"(G)

1-1/4"1-5/8"(L)

(K)

(D)

For variations refer to the chart for limits.All dimensions shown are standard.

SERIES CCG, CRG & CQG PROFILESCUSTOM FRAMES

15-107

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

METAL STUD

WOOD STUD

EXISTING OPENING

ADJUSTABLE FLOOR

ANCHORS

WELDED IN

(Splayed Trim Line)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

WELDED IN

WELDED IN

WELDED IN

WELDED IN

M BACKBEND 1/2" ONLY

4-5/8" TO 14"3" TO 14"

DEPTH DOUBLE RABBET

3/4" MINIMUM

2"

DEPTH SINGLE RABBET

CCG

CQG

CRG

SAME AS DEPTH

OPENING WIDTH DOUBLE

(D)(E)

1/2"

1/2"2"

1/2"

1/2"

(E) (D)

(L)

1-15/16"(K)

2" 5/8"(G)

1-15/16"(K)

5/8"(G)

(L)

1-15/16"(K)

(D)

2"

1/2"

1/2"

(E)

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-108

CUSTOM FRAMESERIES CRH PROFILE

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

EXISTING OPENING

ANCHORS

LOOSE

(Splayed Stop)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

M BACKBEND 1/2"

4-5/8" TO 14"DEPTH SINGLE RABBET

D MINUS K

WELDED INMETAL STUD

1" LESS THAN DEPTH

FACE DIMENSION MUST BE LESS THAN DEPTH1" TO 5"

ADJUSTABLE FLOOR

WOOD STUD

WELDED IN

WELDED IN

OPENING WIDTH DOUBLECRH

2"(F)

EQUAL FACES

2"(F)

1/2"

1/2"

5/8"(G)

1-15/16"(K)

(D)

SERIES CCI, CRI & CQI PROFILESCUSTOM FRAMES

15-109

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

FIXED FLOOR

METAL STUD

WOOD STUD

EXISTING OPENING

ANCHORS

LOOSE

(Stepped Rabbet)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

WELDED IN

WELDED IN

WELDED IN

M. BACKBEND 1/2"

5-7/8" TO 14"3-3/8" TO 14"

DEPTH DOUBLE RABBET

3/4" MINIMUM

WELDED INADJUSTABLE FLOOR

DEPTH SINGLE RABBET

1" LESS THAN DEPTH

1-3/8" IS STANDARD1" TO 5"

OPENING WIDTH DOUBLE

CCI

5/8"

5/8"

(D)

1/2"

1/2"

(E)

2"(F) 5/8"

1/2"

(E)

1/2"

(D)

(L)

1-15/16"(K)

5/8"

CRI

CQI

1-15/16"(K)

(D)

5/8"

(L)

1-15/16"(K)

2"(F)5/8"

5/8"

1/2"

1/2"

(E)

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-110

CUSTOM FRAMESERIES CRJ PROFILE

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 3/4"

I. OPENING WIDTH SINGLE

2'-0" TO 7'-2"OPENING HEIGHT

1'-0" TO 4'-0"3'-0" TO 6'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

1-15/16"

SET UP AND WELDED

(Hemmed Stop)

All dimensions shown are standard.For variations refer to the chart for limits.

16

COLD ROLLEDASTM A60 GALVANIZED

M. BACKBEND 3/8"

2-1/8" MINIMUMDEPTH SINGLE RABBET

3/4" LESS THAN DEPTH

N/A

CRJ 2"

OPENING WIDTH DOUBLE2"(F)

(E)

3/4"(G)

1-15/16"

2-1/8"

3/8"

3/8"

SERIES CRK & CQK PROFILESCUSTOM FRAMES

15-111

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-112

CUSTOM FRAMESERIES CMK & CML PROFILE - MULLIONS

FINISH PRIME PAINTED

G. 3/4" OR 1-1/4"

I. WIDTH

N/AHEIGHT

N/A

J.

MATERIALB.

4-3/4" TO 14"D. DEPTH

C.

F. FACE

H. INTERSECTION CONDITION

A. GAGE

Note: For other sizes and variations, contact customer service.

BUTTED AND WELDED

(Flush Glazed Entrance Mullion)

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

2"

CML

POCKET DEPTHPOCKET WIDTH

5/8"

CMK2"(F)

5/8"(L)

(D)

(L)(G)

(L) (G) (L)

3/4"

7/16"

7/16"

(L)

3/4"(G)

(L)

(D)

2"(F)

3/4"

(G)

L. SOFFIT / BEAD EQUAL

SERIES CQN PROFILECUSTOM FRAMES

15-113

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

EQUAL 1-15/16" TO 4"

ANCHORS

SHEET METAL SCREWS

EXPANSION BOLTS BY OTHERS

(Rough Buck with Slip Jambs)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

12

COLD ROLLEDASTM A60 GALVANIZED

BY OTHERS

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

DEPTH DOUBLE RABBET

2" TO 5"

JAMBS RUN THROUGH

SET UP AND WELDED

SUB-BUCK IS 3 SEPARATE PIECES

BASE FRAME IS WELDED

3/4" MINIMUM (16 AND 14 GAGE)1-3/8" MINIMUM (12 GAGE)

CQN OPENING WIDTH DOUBLE

14

1-7/8"

1-7/8"

1-15/16"(K)

1-15/16"(K)

(L)

1/2"

5/8"(G)

1"

5/8" HOLE IN BASE FOREXPANSION BOLT.BOLT BY OTHERS

D

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-114

CUSTOM FRAMESERIES CUO PROFILE

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. BEAD/SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

5/8" MINIMUM

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

EXISTING OPENING

ADJUSTABLE FLOOR

ANCHORS

LOOSE

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

WELDED IN

WELDED IN

M BACKBENDS 1/2"

5-3/4" TO 14" (16 AND 14 GAGE)6-3/4" TO 14" (12 GAGE)

DEPTH DOUBLE RABBET

1" LESS THAN DEPTH

FACE DIMENSION MUST BE LESS THAN DEPTH1" TO 5"

3/4" MINIMUM (16 AND 14 GAGE)1-3/8" MINIMUM (12 GAGE)

Note: Some combinations, due to manufacturing clearance, must bemade in multiple pieces.

WELDED INWOOD STUD

1/2"

1/2"

(E)

2"(F) 5/8"(G)

(K)

(L)

(L)

(K)

(D)CLGLAZING

CUO

OPENING WIDTH DOUBLE

A. GAGE

(Center Glazed Entrance)16

12

14

SERIES CRP, CCP & CQP PROFILECUSTOM FRAMES

15-115

FINISH

E. THROAT

PRIME PAINTED

G.

I.

OPENING HEIGHTJ.

MATERIALB.

D. DEPTH

C.

F. FACE

H. CORNER CONDITION

A. GAGE

MASONRY

FIXED FLOOR

METAL STUD

WOOD STUD

ANCHORS

LOOSE

(Pocket Slide Door Frame)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

WELDED IN

WELDED IN

4-5/8" TO 14"

POCKET OPTION WIDTHPOCKET OPTION DEPTH

2"5/8"

2'-0" TO 7'-2"

CRP

1-1/8" TO 5"FACE DIMENSION MUST BE LESS THAN DEPTH

NOTES:

1. 1-3/4" doors only2. Frame opening width is 1-1/2" less than standard. Example: 3'-0" nominal door opening will actually be 34-1/2"3. Frame opening height is measured from underside of frame head. Example: 7'-0" nominal opening will actually be 84".4. BEAD IS ATTACHED TO BOTH SIDES OF HEAD MEMBER.

KD AVAILABLE WITH 2" FACESET UP AND WELDED

OPENING WIDTH DOUBLEOPENING WIDTH SINGLE

3'-0" TO 8'-0"1'-0" TO 4'-0"

CCP

CQP

2"(F)1/2"

1/2"

(L)

2"(G)

(L)

(D)(E)

1/2"2"(F)

(D)

2"(F)

(E)

1/2"

(E) (D)

(L)

(G)

(L)

JAMB/HEAD

STRIKE JAMB 1

STRIKE JAMB 2

1/2"

1/2"

ONLY ONHEAD

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-116

CUSTOM FRAMESERIES CCQ, CRQ & CQQ PROFILES

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH SINGLE

2'-0" TO 10'-0"OPENING HEIGHT:

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. BEAD/SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

MASONRY

MASONRY

FIXED FLOOR

METAL STUD

ADJUSTABLE FLOOR

ANCHORS

LOOSE

(60? Flush Plaster Groove)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

WELDED IN

WELDED IN

WELDED IN

4-5/8" TO 14"3" TO 14"

1" LESS THAN DEPTH

FACE DIMENSION MUST BE LESS THAN DEPTH1" TO 5"

3/4" MINIMUM

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

CCQ

CRQ

CQQ

DEPTH SINGLE RABBETDEPTH DOUBLE RABBET

M. BACKBENDS

1/2"60 DEGREE ANGLE

WOOD STUD WELDED IN

EXISTING OPENING WELDED IN

2"(F)

(D)(E)

(M)

(M)

(M)

(E)

(M)2"(F) 5/8"(G)

(L)

(D)

(M)

(E)

(M)

1-15/16"(K)

1-15/16"(K)

(D)(L)

OPENING WIDTH DOUBLE

2"(F) 5/8"(G)

1-15/16"(K)

(M)

SERIES CRR PROFILECONTRAFLAM/SUPERLITE II-45

CUSTOM FRAMES

15-117

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8" DOOR STOP DIMENSION

I. OPENING WIDTH

2'-0" TO 9'-0"OPENING HEIGHT

1'-0" TO 10'-0"

K.

L. SOFFIT

J.

RABBET

MATERIALB.

4-3/4" TO 10-5/8"D.

C.

F.

H. CORNER CONDITION

A. GAGE

CRR

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces.

1-15/16" TO 4" DOOR SIDE

1-3/8" MINIMUM

MASONRY

FIXED FLOOR

AJUSTABLE STUD

METAL STUD

ADJUSTABLE FLOOR

ANCHORS

LOOSE

(Contraflam Glazing, Drywall Frame)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

14

WELDED IN

LOOSE

WELDED IN

WELDED IN

COLD ROLLED

ASTM A60 GALVANIZED

DEPTH

1" LESS THAN DEPTH

FACE 1-3/8" TO 2-3/4"

SET UP AND WELDED

BACKBENDS 1/2"

WOOD STUD WELDED IN

(L)

(D)

5/8"(G)2"(F)

(E)

M.

(M)

(M)

(K)

1-5/8"1-1/4" MIN SIDELITE STOP DIMENSION

3-1/8" TO 4" SIDELITE SIDE

1/2"

1/2"

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-118

CUSTOM FRAMESERIES CRS & CQS PROFILES

FINISH

E. THROAT

PRIME PAINTED

G.

I.

OPENING HEIGHTJ.

MATERIALB.

D. DEPTH

C.

F. FACE

H. CORNER CONDITION

A. GAGE

Note: Some of these combinations, due to manufacturing clearance,must be made in multiple pieces

SET UP AND WELDED

MASONRY

FLOOR

METAL STUD

WOOD STUD

ANCHORS

LOOSE

(Flush Glazed Entrance, Drywall Condition)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

COLD ROLLEDASTM A60 GALVANIZED

2"

WELDED IN

WELDED IN

WELDED IN

4-3/4" TO 14"

1" LESS THAN DEPTH

POCKET DEPTHPOCKET WIDTH

5/8"3/4" OR 1-1/4"

2'-0" TO 10'-0"

OPENING WIDTH SINGLEOPENING WIDTH DOUBLE 3'-0" TO 10'-0"

1'-0" TO 5'-0"

CQS

(L)

(L)

(D)(E)

2"(F) 5/8"

(G)

1/2"

1/2"

1/2"

(E)

1/2"

2"(F)

(L)

(G)

(L)

(D)(G)

CRS

SERIES CUT PROFILECUSTOM FRAMES

15-119

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH: SINGLE

DOUBLE

2'-0" TO 10'-0"OPENING HEIGHT:

1'-0" TO 5'-0"3'-0" TO 10'-0"

K.

L. BEAD/SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

5/8" MINIMUM

SET UP AND WELDED

MASONRY

FIXED FLOOR

ADJUSTABLE STUD

METAL STUD

ADJUSTABLE FLOOR

ANCHORS

LOOSE

(Center Glazed Entrance, Drywall Condition)

ATTACHMENT

All dimensions shown are standard.For variations refer to the chart for limits.

COLD ROLLEDASTM A60 GALVANIZED

WELDED IN

LOOSE

WELDED IN

WELDED IN

M BACKBENDS 1/2"

4-5/8" TO 14"DEPTH DOUBLE RABBET

1" LESS THAN DEPTH

FACE DIMENSION MUST BE LESS THAN DEPTH1" TO 5"

3/4" MINIMUM

Note: Some combinations, due to manufacturing clearance, must bemade in multiple pieces.

WELDED INWOOD STUD

CUT

1416

C

GlazingL(E)

(K)

(K)

(D)

(L)

(L)

5/8"(G)2"(F)1/2"

1/2"

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-120

CUSTOM FRAMESILL SECTIONS S1 & S2 PROFILES

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH

SEE SELECTED PROFILEOPENING HEIGHT

SEE SELECTED PROFILE

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

EQUAL 1-15/16" TO 4"

INTERSECTION

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

12

COLD ROLLED

ASTM A60 GALVANIZED

M BACKBEND

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

3-3/8" TO 14" (12 GAGE)3" TO 14" (16 AND 14 GAGE)DEPTH SINGLE RABBET

DEPTH DOUBLE RABBET

WITH 1/2" BACKBENDS

STANDARD IS 1" LESS THAN DEPTH

4" TO 16"

3/4" MINIMUM (16 AND 14 GAGE) 5/8" STOP1-3/8" MINIMUM (12 GAGE) 5/8" STOP

1/2"1/2"

1/2" 1/2"

SL1

SL2

ASTM G90 GALVANIZED

1/2" TO 1-7/8" (12 GAGE)3/8" TO 1-7/8" (16 AND 14 GAGE)

5/8"(G)

(D)

(K) (K)(L)

(E)

(D)

(K) (L) (K)

(E)

(F)

(F)

5/8"(G)

SILL SECTION SL3 PROFILECUSTOM FRAMES

15-121

All dimensions shown are standard.For variations refer to the chart for limits.

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH

SEE SELECTED PROFILEOPENING HEIGHT

SEE SELECTED PROFILE

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

EQUAL 1-15/16" TO 4"

INTERSECTION

16

14

12

COLD ROLLED

ASTM A60 GALVANIZED

M BACKBEND

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

3-3/8" TO 14" (12 GAGE)3" TO 14" (16 AND 14 GAGE)DEPTH SINGLE RABBET

DEPTH DOUBLE RABBET

WITH 1/2" BACKBENDS

STANDARD IS 1" LESS THAN DEPTH

4" TO 16"

3/4" MINIMUM (16 AND 14 GAGE) 5/8" STOP1-3/8" MINIMUM (12 GAGE) 5/8" STOP

ASTM G90 GALVANIZED

1/2" TO 1-7/8" (12 GAGE)3/8" TO 1-7/8" (16 AND 14 GAGE)

SL3

1/2" 1/2"

5/8"(G)

(K)(K) (L)

(D)

(E)

(F)

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-122

CUSTOM FRAMETWO WAY CORNER POSTCP2 & CP2A PROFILES

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH

SEE SELECTED PROFILEOPENING HEIGHT

SEE SELECTED PROFILE

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

EQUAL 1-15/16" TO 4"

SET UP AND WELDED

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

12

COLD ROLLED

ASTM A60 GALVANIZED

M BACKBEND

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

DEPTH DOUBLE RABBET

NONE

1" TO 5"

3/4" MINIMUM (16 AND 14 GAGE)1-3/8" MINIMUM (12 GAGE)

ASTM G90 GALVANIZED

NONE

CP2

CP2A

5/8"(G)

(D)

(K) (L) (K)

(D)

(K)

(L)

(K)

(D)

(D)

(D)

(D)

5/8"(G)(L)

(D)

(K) (K)

(K)

(L)

(K)

(D)

CORNER POSTCP3 & CP4 PROFILES

CUSTOM FRAMES

15-123

16

12

14

ASTM G90 GALVANIZED

ASTM A60 GALVANIZED

NONE

PRIME PAINTED

COLD ROLLED

NONE

4-5/8" TO 14"

EQUAL 1-15/16" TO 4"

SEE SELECTED PROFILE

SEE SELECTED PROFILE

INTERSECTION

NONE

3/4" MINIMUM

5/8", 3/4", 1", 1-1/4"

M BACKBEND

L.

K.

I.

J.

G.

H.

F.

E.

D.

CORNER CONDITION

OPENING HEIGHT

OPENING WIDTH

RABBET

SOFFIT

STOP HEIGHT

DEPTH DOUBLE RABBET

THROAT

FACE

C.

B.

A.

MATERIAL

FINISH

GAGE

For variations refer to the chart for limits.All dimensions shown are standard.

CP3

CP4

(D)

(D)

(D)(L)

(K)

5/8"(G)

(K)

(D)

5/8"

5/8"

(K)

(L) (D)

(K)

5/8"(G)

5/8"

5/8"

5/8"(G)(D)

Ceco Door Products DISTRIBUTOR TECH DATADistributor Tech Data

15-124

CUSTOM FRAMECORNER POST CPH & CPC PROFILES

FINISH

E. THROAT

PRIME PAINTED

G. STOP HEIGHT 5/8", 3/4", 1", 1-1/4"

I. OPENING WIDTH

SEE SELECTED PROFILEOPENING HEIGHT

SEE SELECTED PROFILE

K.

L. SOFFIT

J.

RABBET

MATERIALB.

D.

C.

F. FACE

H. CORNER CONDITION

A. GAGE

EQUAL 1-15/16" TO 4"

INTERSECTION

All dimensions shown are standard.For variations refer to the chart for limits.

16

14

12

COLD ROLLED

ASTM A60 GALVANIZED

M BACKBEND

4-5/8" TO 14" (16 AND 14 GAGE)5-1/4" TO 14" (12 GAGE)

DEPTH DOUBLE RABBET

NONE

3/4" MINIMUM (16 AND 14 GAGE)1-3/8" MINIMUM (12 GAGE)

ASTM G90 GALVANIZED

5/8"

1-1/4" TO 5" (12 GAGE)

1" TO 5" (16 AND 14 GAGE)

(D)

(K)

(L)

(K)

5/8"(G)

5/8"(G) (D)

(F)

(F)

CPH

(L)(D)

(K)

(K)

(D)

(F)

CPC

(D)

(K) (L) (K)

5/8"(G)

(F) (D)