INDEX [] · AIR DRIVEN Standard Head: Power : 20 W, Speed : 360,000~430,000 min-1 Head Size :...
Transcript of INDEX [] · AIR DRIVEN Standard Head: Power : 20 W, Speed : 360,000~430,000 min-1 Head Size :...
INDEXCouplers
Electric Motors
Electric & slow speeds
Air Motors
Maintenance
Spare Parts
Air Driven Ti-Max ZTi-Max XS-Max MS-Max picoTi-Max X450Pana-Max PLUSPANA-MAXPHATELUS LIGHT PACK
NSK Couplers
NLX nanoTi-Max NL400
Ti-Max ZTi-Max Z45LTi-Max XS-Max MEX Series
Air MotorsiProphy Air
iCarePANA SPRAY PlusMaintenance guide
Spare Parts
P. 2-5P. 6-7P. 8-9P. 10-11P. 12-13P. 14P. 15P. 15
P. 16-17
P. 18-19P. 19
P. 20-21P. 22-23P. 24-25P. 26P. 28-29
P. 30P. 31
P. 32-33P. 33P. 34-35
P. 36-37
1Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 1-1 15.2.26 1:27:45 PM
Air Driven Series
Ti-Max Z Air Driven series feature the essential elementsexpected of high-performance handpieces at even a higher standard.Based on the philosophy of consistently delivering products that exceed all expectations, the new handpieces, supported by non-compromising NSK product design and ultra-high precision processing technology, provide a new level of comfort to both clinicians and patients like never before.With one of the most powerful turbines every designed producing 26W of power, our technological innovation will transform the dental practice.
Only Z900L*
POWERFUL 26W , STEADY & DURABLE*
2 Restorative & Prosthetics 3Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 2-3 15.2.26 1:27:53 PM
AIR D
RIV
EN
Miniature Head : Power : 23 W, Speed : 360,000~440,000 min-1
Head Size : ø10.8 x H12.1 mm
Z800L P1110ORDER CODE:MODEL:Optic
Standard Head : Power : 26 W, Speed : 320,000~400,000 min-1
Head Size : ø12.5 x H13.1 mm
Z900L P1111ORDER CODE:MODEL:Optic
Quattro Spray
26W of Pure PowerJust Raised the Bar Again
• Titanium Body with Scratch Resistant DURAGRIP • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Push Button Chuck • Quattro Spray • Microfilter
Connect to NSK Couplers
MODEL
ORDER CODE
Miniature Head
Standard Head
COuPLER
Coupler Options
StarDental®MIDWEST®W&H® Roto Quick (RA Type)
W&H® Roto Quick (RQ Type)
KaVo® LED CouplerNSK Couplers(PTL type)
NSK KaVo® W&H® W&H® MIDWEST® StarDental®
Z800L Z800KL Z800WL Z800WHL Z800MWL Z800STL
ORDER CODE P1110 P1112 P1120 P1118 P1130 P1213
MODEL Z900L Z900KL Z900WL Z900WHL Z900MWL Z900STL
P1111 P1113 P1121 P1119 P1131 P1214
*
*
Compatible Air driven with Integral LED*
Autoclavable up to 135ºCWashable in the thermodisinfector4 Restorative & Prosthetics 5Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 4-5 15.2.26 1:27:57 PM
AIR D
RIV
EN
Quattro Spray
• Titanium Body with Scratch Resistant DURACOAT • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Push Button Chuck • Quattro Spray
• For short shank burs only
Miniature Head : Power : 17 W, Speed : 390,000~450,000 min-1
Head Size : ø10.3 x H11.7 mm
X500L P495ORDER CODE:MODEL:Optic
Standard Head : Power : 21 W, Speed : 380,000~440,000 min-1
Head Size : ø 11.2 x H13.6 mm
X600L P496ORDER CODE:MODEL:Optic
MODEL
ORDER CODE
MODEL
ORDER CODE
Miniature Head
Standard Head
COuPLER
NSK KaVo® W&H® W&H®
*X600L X600KL X600WLED X600WHL
P496 P858 P1101 P1094
Coupler Options
KaVo® LED Coupler W&H® Roto Quick (RA Type)
X500L X500KL
P495 P857
Connect to NSK Couplers
Compatible Air driven with Integral LED*
NSK Couplers(PTL type)
W&H® Roto Quick (RQ Type)
The Satisfaction of Owning a Lighter Weight and Better-Balanced Handpiece
Autoclavable up to 135ºCWashable in the thermodisinfector6 Restorative & Prosthetics 7Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 6-7 15.2.26 1:28:02 PM
AIR D
RIV
EN
Standard Head : Power : 20 W, Speed : 360,000~430,000 min-1
Head Size : ø12.1 x H13.3 mm
M600 P1004ORDER CODE:MODEL:Non-Optic
M600L P1002ORDER CODE:MODEL:Optic
Quattro Spray
Miniature Head : Power : 16 W, Speed : 380,000~450,000 min-1
Head Size : ø10.6 x H12.4 mm
M500 P1003ORDER CODE:MODEL:Non-Optic
M500L P1001ORDER CODE:MODEL:Optic
Slim Ergonomic Design and Unrivalled Cutting Performance
• Stainless Steel Body • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Push Button Chuck • Quattro Spray Coupler Options
MODEL
ORDER CODE
MODEL
ORDER CODE
Miniature Head
Standard Head
COuPLER
M500L
P1001
M600L
P1002
M500
P1003
M600
P1004
M500KL
P1005
M600KL
P1006
M500K
P1007
M600K
P1008
KaVo® LED Coupler
NSK NSK(Optic) (Non-Optic)
KaVo® KaVo®
(Optic) (Non-Optic)
Connect to NSK Couplers
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector8 Restorative & Prosthetics 9Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 8-9 15.2.26 1:28:05 PM
AIR D
RIV
EN
• For short shank burs / ultra short shank burs
Power : 9 W, Speed : 380,000~450,000 min-1, Head Size : ø8.6 x H9.0 mm
S-Max pico P1140ORDER CODE:MODEL:Optic
9.0
ø8.6
13.6
ø11.2
Comparison of head sizes
Ti-Max X600L(Standard Head)
S-Max pico(Ultra Miniature Head)
Size specifications of the S-Max pico series
Single Spray
The innovative air driven with anultra mini head and super slim body
• Stainless Steel Body • ISB • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Single Spray
MODEL
ORDER CODE
COuPLER
Coupler Options
StarDental®MIDWEST®W&H® Roto Quick (RA Type)
W&H® Roto Quick (RQ Type)
KaVo® LED Coupler
NSK KaVo® W&H® W&H® MIDWEST® StarDental®
S-Max pico S-Max pico KL S-Max pico WHL S-Max pico MWL S-Max pico STL
P1140 P1142 P1145 P1178 P1179 P1180
S-Max pico WLED*
Connect to NSK Couplers
Compatible Air driven with Integral LED*
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector10 Restorative & Prosthetics 11Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 10-11 15.2.26 1:28:13 PM
AIR D
RIV
EN
Triple Water Jet
• Titanium Body with Scratch Resistant DURACOAT • 45˚ Angle Head • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Push Button Chuck • Triple Water Jet
Power : 21 W, Speed : 380,000~450,000 min-1, Head Size : ø11.2 x H13.5 mm
X450 P1088ORDER CODE:MODEL:Non-Optic
X450L P1078ORDER CODE:MODEL:Optic
• For FG extra-long burs (25mm) only
Unique 45-degree angled head provides incredible accessibility
The 45-degree angled head offers excellent accessibility and visibility during root separation procedures and the removal of hard tissue covering impacted third molars.
Superior Accessibility
MODEL
ORDER CODE
COuPLER
Coupler Options
Midwest4 hole
Midwest 5 hole
StarDental®MIDWEST®W&H® Roto Quick (RA Type)
W&H® Roto Quick (RQ Type)
KaVo® LED Coupler
Compatible Air driven with Integral LED*
P1078 P1088 P1079 P1082 P1089 P1090 P1091 P1093 P1092
KaVo® W&H® W&H® MIDWEST® StarDental®NSK NSK(Optic) (Non-Optic)
Fixed-back Fixed-back(Optic) (Non-Optic)
X450L X450 X450KL X450WLED X450WHL X450MWL X450STL X450 5H X450M4*
Connect to NSK Couplers
NSK Couplers(PTL type)
Autoclavable up to 135ºCWashable in the thermodisinfector12 Restorative & Prosthetics 13Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 12-13 15.2.26 1:28:21 PM
AIR D
RIV
EN
• Stainless Steel Body • Ceramic Bearings • Clean Head System • Push Button Chuck • Quattro Spray
Quattro Spray
• Stainless Steel Body • Ceramic Bearings • Clean Head System • Push Button Chuck • Single Spray
Single Spray
Compact Unit For Illumination Control of 2 Optic Handpieces. For Integration Into All Dental Equipment.
Phatelus Optic Complete Set
Contents• PTL Control Module • Hose (PTL-4HP) • PTL Adaptor
PTL Optic Pack Y103722ORDER CODE:MODEL:
Individual Components
• Dimension : W50 x L90 x H26 (mm) • Weight : 120 g
PTL Control Module U360011ORDER CODE:MODEL:
• Optic Hose • Lux Coupler
P421ORDER CODE:PTL-4HPMODEL:
U360033ORDER CODE:PTL Adaptor MODEL:
Autoclavable up to 135ºCWashable in the thermodisinfector
Standard Head : Speed : 340,000~410,000 min-1, Head Size : ø12.1 x H13.3 mm • Midwest 4 hole
PAP-SU M4 P1022ORDER CODE:MODEL:Non-Optic
Miniature Head : Speed : 380,000~450,000 min-1, Head Size : ø10.6 x H12.4 mm • Midwest 4 hole
PAP-MU M4 P1021ORDER CODE:MODEL:Non-OpticStandard Head : Speed : 400,000~450,000 min-1, Head Size : ø10.3 x H13.5 mm
• Midwest 4 hole
PAX-SU M4 P560ORDER CODE:MODEL:Non-Optic
14 Restorative & Prosthetics 15Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 14-15 15.2.26 1:28:35 PM
CO
UP
LER
S
Couplers for KaVo® MULTIflex® LUX • Stainless Steel Body • With water volume adjuster
NSK Couplers • Stainless Steel Body • Titanium coating • Non-Retraction Valve
Non-Optic FM-CL-M4-T P434081ORDER CODE:MODEL:
Midwest 4 hole
Optic KCL-5 P443051ORDER CODE:MODEL:
Midwest 5 hole
Optic
• Light bulb included in coupler
KCL-6 P442051ORDER CODE:MODEL:
LUX Coupler
Optic
• Light bulb included in coupler
PTL-CL-4HV-T P401081ORDER CODE:MODEL:
LUX Coupler
• For NSK with water volume adjuster • LED incorporated in coupler
Optic P1001601ORDER CODE:PTL-CL-LEDIIIMODEL:
LUX Coupler
Optic PTL-CL-FV-T P380081ORDER CODE:MODEL:
Midwest 5 hole
NSK air driven coupler options by series
Ti-Max Z
Ti-Max X
S-Max M
S-Max pico
Ti-Max X450
COuPLER TyPE
StarDental®KaVo® LED Coupler
W&H® Roto Quick (RQ Type)
W&H® Roto Quick (RA Type)
MIDWEST®
W&H® W&H® MIDWEST® StarDental®NSK NSK(Optic) (Non-Optic)
KaVo® KaVo®
(Optic) (Non-Optic)
NSK Couplers(PTL type)
• For NSK • LED incorporated in coupler
PTL-CL-LED P1001600ORDER CODE:MODEL:Optic
LUX Coupler
• For KaVo® MULTIflex® LUX with water volume adjuster • LED incorporated in coupler
KCL-LED P1005600ORDER CODE:MODEL:Optic
LUX Coupler
Ge
ne
ral
seri
es
Sp
ecia
lity
seri
es
• - • - • • • •
• - • - • • - -
• • • • - - - -
• - • - • • • •
• • • - • • • •
X600WLED only X600WHL only
16 Restorative & Prosthetics 17Restorative & Prosthetics
P00-17_D718Av6_e_1502.indd 16-17 15.2.26 1:28:38 PM
A New Generation of Electric motor as well balanced as an air driven
Speed : 2,000 – 40,000 min-1, Torque : 3.4 Ncm
Electric motor Portable System Brushless
Speed : 2,000 – 40,000 min-1, Torque : 3.4 Ncm
Electric motor Portable System Brushless
OpticInternal Water Spray
Mounting Accessories
Perfect BalanceThe balance of the electric motor and handpiece combined has been dramatically improved as the weight and size of NLX nano has been reduced drastically.
The overall length of instrument and NLX nano electric motor are almost the same as the length of air driven and couplers, thus enabling practitioners to use electric attachments and the NLX nano electric motor just like they use air driven handpieces.
Z95L + NLX nano
Air Driven
Weighted Point
Wider clinical applicationsNLX nano covers a wide speed range and is compatible with your existing optic and non-optic electric handpieces. Combined with a wide range of electric handpieces, it covers a speed range of 100 – 200,000 min-1, to make it suitable for any applications.
100 1,000 2,000 2,500 10,000 40,000 200,000
16 : 1
1 : 1
1 : 5
100-2,500 min-1
2,000-40,000 min-1
10,000-200,000 min-1
Contents• Control unit • Electric motor• Electric motor cord • AC Adaptor
NL400S120 Y141129ORDER CODE:MODEL:
Specifications
• Rated Input : AC 28V 50/60 Hz • Dimensions : W127 x D149 x H54 (mm) • Weight : 517 g
Control unit
• Dimensions : ø22.5 × L81 (mm)• Weight : 76 g
Electric motor (Electric motor only)
Z249ORDER CODE:
Swing Mount BracketMODEL:
Z1141101ORDER CODE:
Undercounter Mount BracketMODEL:
OpticInternal Water Spray
Contents• Control unit • Electric motor• Electric motor cord • AC Adaptor
Specifications
• Rated Input : AC 28V 50/60 Hz • Dimensions : W127 x D149 x H54 (mm) • Weight : 517 g
Control unit
• Dimensions : ø22 × L70 (mm)• Weight : 61 g
Electric motor (Electric motor only)
NLX nano S120E Y1002732ORDER CODE:MODEL:
NLX nano S120 Y1001361ORDER CODE:MODEL:
18 Restorative & Prosthetics 19Restorative & Prosthetics
ELECTR
IC M
OTO
RS
P18-29_D718Av6_e_1502.indd 18-19 15.2.26 1:18:54 PM
Single Spray• Single Spray • For CA burs (ø2.35)
• Max Speed: 40,000 min-1
Z25L C1038ORDER CODE:MODEL:
1:1 Direct Drive
Optic
Single Spray
11.813.4
Z85LZ95L
Head size comparison
Z85L offering extraordinary visibility and accessibility.
Quattro Spray
• Titanium Body with Scratch Resistant DURACOAT • Cellular Glass Optics • Ceramic Bearings (Z95L / Z85L) • Clean Head System • Push Button Chuck • Microfilter • Anti Heat System (Z95L / Z85L) • DLC Coating (Z95L / Z85L)
• Quattro Spray • For FG burs (ø1.6) • Max Speed: 200,000 min-1
Z95L C1034ORDER CODE:MODEL:
1:5 Increasing
Optic
The Ti-Max Z Series handpieces feature the smallest head and slimmest neck dimensions in the global market, providing a standard of operational visibility like never before. Accessing otherwise difficult oral regions is made significantly easier by the ergonomic design.
HEAD & SLIMMEST NECKSMALLEST
Outstanding DurabilityZ95L exceeds all expectations for reliability and durability. The Z95L gears have been designed using High Spec 3D simulation software to achieve optimal results in terms of durability and noise level minimization. In addition, special DLC Coating (Diamond-Like-Carbon) is applied to the gear to dramatically increase durability.
Easier AccessThe Z95L head and body shape improve access to the molar region.
13.913.4 15.0
8.9
8.0 9.3 8.4
10.3 9.6
NSK Z95L Competitor A Competitor B
Smaller and Slimmer
Z95L has the smaller head and slimmer neck dimensions.
Electric Attachment Series
Z85L C1062ORDER CODE:MODEL:Optic
• Single Spray • Miniature Head • For FG burs (ø1.6)* • Max Speed: 200,000 min-1
1:5 Increasing
*For short shank burs only
Autoclavable up to 135ºCWashable in the thermodisinfector20 Restorative & Prosthetics 21Restorative & Prosthetics
ELECTR
IC &
SLO
W SPEED
P18-29_D718Av6_e_1502.indd 20-21 15.2.26 2:46:04 PM
• Titanium Body with Scratch Resistant DURACOAT • 45˚ Angle Head • Cellular Glass Optics • Ceramic Bearings • Clean Head System • Push Button Chuck • Quattro Spray (Water Jet / Mist) • Microfilter • Anti Heat System • DLC Coating
• For FG burs (ø1.6) • Max Speed: 168,000 min-1
Z45L C1064ORDER CODE:MODEL:
1:4.2 Increasing
Optic
Superior Accessibility Enables a Vast Variety of Clinical Applications
You can gain a comfortable finger rest without stress thanks to the extra space the slim Ti-Max Z45L creates between the front teeth. It is also easy to maintain the bur at an optimal angle and achieve precise sectioning, even when the operating depth is close to apex.
sectioning a Mandibular left Impacted Third Molar
When working on the palatal side of a second premolar, Ti-Max Z45L ensures that you can operate smoothly and have plenty of working space between the maxillary adjacent teeth.
Caries removal from a Maxillary left second Premolar on Palatal side
Securing a solid finger rest on a front tooth enables stable cutting without interference from other teeth. Since you can also freely control the angle of the bur, minimal intervention treatments are also possible.
Caries removal from a Maxillary left lateral Incisor's Cervical Area
Ti-Max Z45L enables you to prep smoothly without interference from the rubber dam clamp. Its flexibility also makes treatments safer and more precise.
Clarifying the root Canal Orifice of a Mandibular right second PremolarTwo-Way spray Function
The world’s first two-way spray function allows you to instantly choose a mist or jet spray depending on the conditions and procedure with an enclosed dedicated tool. The water jet spray prevents subcutaneous emphysema in surgical procedures, and the mist spray effectively cools the bur while cutting.Water Jet Mist
Standard electricattachment handpiece
superior AccessibilityThe 45-degree angled head allows easy access to the molar region, minimizing interference from the front teeth and adjacent teeth.
Ti-Max Z45L provides effortless access to hard-to-reach molars that a standard electric attachment handpiece simply cannot match.The slim Ti-Max Z45L also offers excellent visibility and high operability, creating more space between adjacent teeth and the handpiece body. Ti-Max Z45L’s powerful and consistent cutting shortens treatment time for time-consuming sectioning and third-molar extractions, compared to standard electric attachment handpiece, dramatically reducing stress for both clinicians and patients.In addition, Ti-Max Z45L boasts the world’s first two-way spray function, making it suitable for a wide range of procedures, such as third-molar preparation and clarifications of the root canal orifice.
THE WORLD’S FIRST45˚
Autoclavable up to 135ºCWashable in the thermodisinfector22 Restorative & Prosthetics 23Restorative & Prosthetics
ELECTR
IC &
SLO
W SPEED
P18-29_D718Av6_e_1502.indd 22-23 15.2.26 1:24:49 PM
Quattro Spray
Single Spray
Single Spray
• Single Spray • For CA burs (ø2.35)• Max Speed: 2,500 min-1
16:1 reduction
X10L C603ORDER CODE:MODEL:Optic
• Titanium Body with Scratch Resistant DURACOAT • Cellular Glass Optics • Clean Head System (Exclude X35L)
• Push Button Chuck (Exclude X65L) • Microfilter (Exclude X65L)
• Quattro Spray • For FG burs (ø1.6)• Ceramic Bearings • Max Speed: 200,000 min-1
1:5 Increasing
X95L C600ORDER CODE:MODEL:Optic
• Single Spray • For CA burs (ø2.35)• Max Speed: 40,000 min-1
1:1 Direct Drive
X25L C601ORDER CODE:MODEL:Optic
Straight Handpiece
X65L H273ORDER CODE:MODEL:Optic
• Single Spray • For HP burs (ø2.35) • For CA burs (ø2.35)* • Max Speed: 40,000 min-1
*Need to insert the supplied bur stopper
1:1 Direct Drive
1:1 Direct Drive • Single Spray • For FG burs (ø1.6)• Max Speed: 40,000 min-1
X20L C605ORDER CODE:MODEL:Optic
• Single Spray • For CA burs (ø2.35)• Max Speed: 10,000 min-1
4:1 reduction
X15L C602ORDER CODE:MODEL:Optic
• Single Spray • For Hand File & Engine File• 60º Twist • Max Speed: 4,000 min-1
10:1 reduction
X35L C620ORDER CODE:MODEL:Optic
QF Adaptor C877701ORDER CODE:MODEL:
X85L C604ORDER CODE:MODEL:Optic
1:5 Increasing • Single Spray • Miniature Head • For FG burs (ø1.6)* • Ceramic Bearings
• Max Speed: 200,000 min-1
*For short shank burs only
Autoclavable up to 135ºCWashable in the thermodisinfector24 Restorative & Prosthetics 25Restorative & Prosthetics
ELECTR
IC &
SLO
W SPEED
P18-29_D718Av6_e_1502.indd 24-25 15.2.26 1:24:57 PM
Quattro Spray
Single Spray
• Quattro Spray • For FG burs (ø1.6) • Ceramic Bearings • Max Speed: 200,000 min-1
M95 C1026ORDER CODE:MODEL:
M95L C1023ORDER CODE:MODEL:
1:5 Increasing
Non-Optic
Optic
• Single Spray • For CA burs (ø2.35) • Max Speed: 40,000 min-1
M25 C1027ORDER CODE:MODEL:
M25L C1024ORDER CODE:MODEL:
1:1 Direct Drive
Non-Optic
Optic
• Single Spray • For CA burs (ø2.35) • Max Speed: 10,000 min-1
M15 C1028ORDER CODE:MODEL:
4:1 reduction
Non-Optic
• Single Spray • For HP burs (ø2.35) • For CA burs (ø2.35)* • Max Speed: 40,000 min-1
*Need to insert the supplied bur stopper
M65 H1008ORDER CODE:MODEL:
1:1 Direct Drive
Non-Optic
Straight Handpiece
• Stainless Steel Body • Cellular Glass Optics • Clean Head System • Push Button Chuck (Exclude M65)
Autoclavable up to 135ºCWashable in the thermodisinfector26 Restorative & Prosthetics 27Restorative & Prosthetics
ELECTR
IC &
SLO
W SPEED
P18-29_D718Av6_e_1502.indd 26-27 15.2.26 1:25:01 PM
EX Series Heads & HandpiecesExternal Water Spray
Heads for General ApplicationNon-Optic
Heads for Prophylaxis ApplicationNon-Optic
Heads for Endodontic ApplicationNon-Optic
Handpieces
EC C100008ORDER CODE:MODEL:
• 1:1 Direct Drive
ECM C100007ORDER CODE:MODEL:
• 4:1 Reduction
ER4 C634ORDER CODE:MODEL:
• 10:1 Reduction
ER10 C635ORDER CODE:MODEL:
• 16:1 Reduction
ER16 C636ORDER CODE:MODEL:
• 64:1 Reduction
ER64 C637ORDER CODE:MODEL:
• For CA burs (ø2.35) • Clean Head System• Push Button Chuck • Ball Bearing • Max Speed: 40,000 min-1
FPB-Y C875ORDER CODE:MODEL:
• For CA burs (ø2.35) • Latch type• Max Speed: 30,000 min-1
NAC-Y C032002ORDER CODE:MODEL:
• For CA burs (ø2.35) • Latch type• Ball Bearing • Max Speed: 40,000 min-1
BB-Y C037ORDER CODE:MODEL:
• For screw-in cups and brushes• Max Speed: 5,000 min-1
AR-Y (S) C187ORDER CODE:MODEL:
• For snap-on cups • Max Speed: 5,000 min-1
AR-Y (K) C188ORDER CODE:MODEL:
• For Eva tips • Vertical Reciprocating (Stroke Length 1.4mm)
• Max Speed: 10,000 min-1
EVA-Y C235ORDER CODE:MODEL:
• For CA burs (ø2.35) • Latch type • Ball Bearing • With Water Nozzle • Max Speed: 40,000 min-1
NBBW-Y C211ORDER CODE:MODEL:
• Miniature Head • Latch type• For CA burs (ø2.35) • Max Speed: 30,000 min-1
NM-Y C247ORDER CODE:MODEL:
• Miniature Head • Push Button Chuck• Max Speed: 20,000 min-1
MP-Y C547ORDER CODE:MODEL:
• Connection for Apex locator (For long shank)• Miniature Head • Push Button Chuck • Max Speed: 20,000 min-1
MPA-Y C548ORDER CODE:MODEL:
• Connection for Apex locator (For short shank)• Miniature Head • Push Button Chuck • Max Speed: 20,000 min-1
MPAS-Y C882ORDER CODE:MODEL:
• 80° Twist • For engine files (ø2.35) • Push Button Chuck • Max Speed: 4,000 min-1
TEQ-Y C849ORDER CODE:MODEL:
• 60° Twist • For hand files • Push Button Chuck • Max Speed: 4,000 min-1
TEP-Y C837ORDER CODE:MODEL:
• For FG burs (ø1.6) • Clean Head System• Push Button Chuck • Max Speed: 40,000 min-1
FFB-Y C884ORDER CODE:MODEL:
• 10:1 Reduction • For CA burs (ø2.35) • Clean Head System • Push Button Chuck• Max Speed: 3,000 min-1
NRS2-Y C549ORDER CODE:MODEL:
Handpieces and heads are sold separately. You can combine handpieces and heads according to your preference and speed required for the indication.
• For HP burs (ø2.35) • Clean Head System • Max Speed: 40,000 min-1
EX-6B H260001ORDER CODE:MODEL:
1:1 Direct Drive
Non-Optic
• For HP burs (ø2.35) • Clean Head System • Max Speed: 10,000 min-1
EX-5B H262ORDER CODE:MODEL:
4:1 reduction
Non-Optic
• For EX-6B, EX-5B (Optional)
Spray Nozzle H019711ORDER CODE:MODEL:
Straight Handpieces
Washable in the thermodisinfector (Exclude NAC-Y, BB-Y, NBBW-Y, NM-Y, TEQ-Y, EC, ER4, ER10, ER16, ER64, EX-6B and EX-5B) Autoclavable up to 135ºC28 Restorative & Prosthetics 29Restorative & Prosthetics
ELECTR
IC &
SLO
W SPEED
P18-29_D718Av6_e_1502.indd 28-29 15.2.26 1:25:09 PM
360˚ swivel
Air Motors
Optic
Internal Water Spray
Internal Water Spray
• Midwest 4 hole • Max. 20,000 min-1
• Non-Retraction Valve
IS-205 M4 M156ORDER CODE:MODEL:Non-Optic
• LUX Coupler • Max. 20,000 min-1 • Non-Retraction Valve
Ti205L M190ORDER CODE:MODEL:Optic
External Water Spray
• Midwest 4 hole • Max. 20,000 min-1
EX-203C M4 M195ORDER CODE:MODEL:Non-Optic
No Water Spray
• Midwest 4 hole • Max. 20,000 min-1
EX-204 M4 M189ORDER CODE:MODEL:Non-Optic
Prophylaxis Air Motor
The Future of the Dental Hygiene Handpiece
The handpiece's unique two-part construction allows for just the nosecone portion to be sterilized for proper disinfection and compliance. Additional nosecones may be purchased separately (see Parts and Accessories section for item detail).
Nosecone separates from motor
iProphy Air / 109mm, 74g ø19.6mm
Competitor / 120mm, 79g ø23.4mm
Slim, Shorter and LighterThe iProphy Air handpiece is designed using NSK's ergonomic method. This slim, short and light handpiece provides good balance and less fatigue for the Dental Hygienist.
Noise Generated Vibration Generated Nosecone separates from motor
Leading competitor's handpiece
iProphy Air 65dBA
68dBA
79dB Yes
88dB
Noise Generated Vibration Generated
65dB68dB
79dB
88dBLeading competitor's handpieceiProphy Air
0
90
80
70
60
Noise
Vibration
65dB
68dB
Leading competitor's handpiece
iProphy Air
0 90807060
79dB
88dB
Smooth and QuietNSK ultra-precision micro machining technology has been applied to all parts of iProphy Air that remarkably reduce vibration & noise to the lowest level resulting in improved comfort for patients and the Dental Hygienist.
• Midwest 4 hole • Max. speed : 3,000 min-1
iProphy Air M1020ORDER CODE:MODEL:Non-Optic
Contents• iPA-HP • iPA • iProphy Air Color Ring Set (Pack of 4)
Autoclavable up to 135ºC30 Restorative & Prosthetics 31Restorative & Prosthetics
AIR
MO
TOR
S
P30-37_D718Av6_e_1502.indd 30-31 15.2.26 1:15:59 PM
Automatically Cleans & LubricatesiCare sets a new standard for handpiece maintenance system. The maintenance of the handpiece can be implemented with the simple touch of buttons because an appropriate cleaning program according to each type, including the volume of lubrication oil to be injected, has been installed.The newly adopted chuck-cleaning function allows dentists to effectively remove dirt and abrasive powder from the inside of the chuck to prevent chuck-related problems. This maintains the optimal condition of handpieces and greatly extends their operating life.The optimization of the volume of lubrication reduces the running cost.Improved functionality and enhanced cleaning and oil lubrication provide better daily maintenance. The solution for handpiece care is iCare.
• Preset oil volume based on handpiece type• Consistent cleaning and lubrication with simple operation• Chuck cleaning function ensures that the chuck is thoroughly cleaned and lubricated• Low oil cost per handpiece provides a lower lifetime operating cost• Stylish & compact body that can be installed with limited space
Advantages
PANA SPRAY Plus is a specially formulated, highly effective general handpiece and air motor lubricant. Frequent application of PANA SPRAY Plus will assure handpiece and air motor performance and durability. Apply PANA SPRAY Plus every time before autoclaving any handpiece or air motor.
PANA SPRAY Plus
iCare Adaptors
PTL Adaptor
KV Adaptor
SR Adaptor
WH Adaptor
BA Adaptor
• For NSK Air driven Handpieces for NSK Phatelus / Mach Coupler
• For KaVo® Air driven Handpieces for MuLTiflex® LuX Coupler
• For Sirona® Air driven Handpieces for Quick Coupler
• For W&H® Air driven Handpieces for Roto Quick Coupler (RQ Type)
• For Bien-Air® Air driven Handpieces for unifix® Coupler
Z257010
Z257020
Z257023
Z257021
Z280022
Check with the dealer for the adaptors to mount other manufactures’ handpieces.
MODEL:
MODEL:
MODEL:
MODEL:
MODEL:
ORDER CODE:
ORDER CODE:
ORDER CODE:
ORDER CODE:
WHL Adaptor • For W&H® Air driven Handpieces for Roto Quick Coupler (RA Type)Z280053MODEL: ORDER CODE:
ORDER CODE:
MWL Adaptor • For MiDWEST® Air driven Handpieces for 5-Hole CouplerZ280052MODEL: ORDER CODE:
STL Adaptor • For StarDental® Air driven Handpieces for HiFlo® Fiber-Optic Swivel (4-Hole F.O.) CouplerZ280051MODEL: ORDER CODE:
• For Air driven, Electric & slow speed handpieces and air motors• 10.5 oz • Alcohol-contained lubricant
Z182600ORDER CODE:PANA SPRAY PlusMODEL:
Enhanced cleaning ability facilitates the complete removal of dirt and foreign substances from internal parts and between the teeth of the gears in the handpiece.Automated cleaning and lubrication of handpieces is performed with the simple touch of buttons. Simple operation is achieved by preset oil volumes for Air driven, Electric & slow speed handpieces.
Cleaning And Lubrication Simplified
Purge cycle time can be adjusted to 3 different pre-set selections according to user preference and usage.**Typical setting is M
Multiple Air Purge SettingsThe chuck cleaning function completely removes dirt and cutting powder from the chuck.
Chuck Cleaning FunctionSince iCare is equipped with a large tank (1.2 L capacity), making refilling the tank one easy step and eliminates the possibility of spills and need to store excess oil.
Large Oil Tank
iCare Complete SetsDual Standard Connectors + Dual Rotation Connectors
Y1002796ORDER CODE:iCare C2 TypeMODEL:
Single Standard Connector + Triple Rotation Connectors
Y1002797ORDER CODE:iCare C3 TypeMODEL:
• iCare unit • Power cord • Chuck Cleaning Nozzle • Air tube • Maintenance oil for iCare (1 L) • Mist filter set • Oil absorber sheet
Contents
Specifications
• Power Supply : AC 100-240V 50/60Hz• Air Pressure : 0.5-0.6 MPa (5.0-6.0 kgf/cm2) • Weight : 6.5 kg (C2 type / C3 type) • Dimension : W280 x D240 x H350 (mm)• Solution Tank Capacity : 1.2 L
Connects only to Midwest 4-hole type Air piping is necessary (5.0-6.0 kgf/cm2)
• Do not use iCare to lubricate air scalers and Phatelus air motors. The iCare lubricating system is not designed to lubricate those particular products. Maintain air scalers and Phatelus air motors as described in the operation manual for each product.
• If blood infiltrates inside a handpiece, iCare may not totally clean the internal handpiece components, and internal blood coagulation may cause product failure. In this case, NSK recommends to immediately lubricate those handpieces with PANA SPRAY Plus.
32 Restorative & Prosthetics 33Restorative & Prosthetics
MA
INTE
NA
NC
E
P30-37_D718Av6_e_1502.indd 32-33 15.2.26 1:16:17 PM
31 2
4 5 6
Maintenance guide
Air driven, Electric & slow speed Handpieces
4. LUBRICATION • Essential after thermo-disinfection • Essential prior to sterilization process
Manual : Lubricate handpiece using NSK PANA SPRAY Plus. To prevent mist spray from escaping into the environment, use absorbent cloth. Purge excess lubricant from handpiece with air.
Automated : Clean and lubricate handpieces with NSK iCare. Be sure to use the right adaptor for each handpiece.
5. STERILIZATION Place handpieces in a sterilization pouch and seal them. EN13060 4.6.3 recommends autoclaving for 20 minutes (minimum holding time) at 121˚C or 15 minutes (minimum holding time) at 132˚C. NSK recommends Class B or S sterilization. (All NSK handpieces are autoclavable up to 135˚C)
6. STORAGE After the sterilization cycle, immediately remove handpieces from the autoclave. Keep them in dust-free, sterilized storage or bring them to a treatment room for use.
1. PREPARATION Electric & slow speed : Remove the handpiece from the electric motor and detach the bur from the chuck.
Air driven : Remove the handpiece from the coupler and detach the bur from the chuck. Bring instruments to a dedicated decontamination area. Remove organic contaminants with a paper wipe.
2. CLEANING Manual : Clean the external surface of handpiece with running water (<38˚C, demineralised water recommended).Automated NSK handpieces with this symbol are thermo-disinfector-ready and therefore may be washed
and disinfected using a thermo-disinfector. When using a thermo-disinfector, be sure to follow its manufacturer's instructions.
Cleaning of Cartridge & Handpiece Body of Air driven
Remove head cap and take out cartridge.
Take out cleaning pin at the rear end of the brush, and insert it straight into the water spray nozzle.The water hole may be damaged if the pin is not inserted straight or forced into the hole. The damage may cause water not being sprayed at right angles. Use attached NSK Nozzle Cleaning Pin. Using a cleaning pin from another manufacturer other than NSK may cause improper direction of water spray.
Make sure the pin reaches the upper chase (chip air chase) and then clean debris there by using cleaning brush.
Blow air from the bur side by using syringe.
When placing the cartridge back in the head, be sure that O-ring is set properly in place.
Insert the needle for cleaning nozzle into spray hole from the head side. Remove adhesion of dirt inward. Attach the handpiece to the coupler, run the handpiece idly with water.
1.
2.
3.
4.
5.
6.
1
4
2 3
5 6
Lubricate the chuck directly through the bur insertion hole to remove dirt and cutting powder from the chuck.
Manual : Using NSK PANA SPRAY Plus, Mount the arrow-head spray nozzle tip into the spray can port and spray for 2 seconds.
Automated : Using NSK iCare, follow the system instructions.
3. CHUCK CLEANING
• Complete this step weekly
34 Restorative & Prosthetics 35Restorative & Prosthetics
MA
INTE
NA
NC
E
P30-37_D718Av6_e_1502.indd 34-35 15.2.26 1:16:45 PM
Autoclavable up to 135ºCWashable in the thermodisinfector36 Restorative & Prosthetics 37Restorative & Prosthetics
SP
AR
E P
AR
TS
Couplers
P401054Non-Retraction Valve
S-Max picoSX-PU04Head cap forS-Max pico
P1140500P1140200
Y900580
SX-PU03Cartridge forS-Max pico
PTL O-ring Set(Pack of 5)
SX-PU05Head cap wrench for S-Max pico
20002803
Pana-Max PLuS
P1001250
P1002250
SX-MU03Cartridge for
Miniature head
SX-SU03Cartridge for
Standard head
P1001500SX-MU04Head cap for
Miniature head
P1002500SX-SU04Head cap for
Standard head
SX-SU05Head cap wrench for
Miniature head & Standard head 20000535
iProphy Air MOdeL PROdUCTS ORdeR COde MOdeL PROdUCTS ORdeR COde MOdeL PROdUCTS ORdeR COde
EX Series
Spray Nozzlefor NM
Spray NozzleFor EX-5B, EX-6B
FPB-02Middle Gear
NAC-02Middle Gear
C039701
H019711
C875012
C032012
C875060
C030011
C037015
C210015
C884060
C032701FPB-03Cartridge for FPB
NAC-03Cartridge for NAC
BB-03Cartridge for BB
NBB-03Cartridge for NBBW
FFB-03Cartridge for FFB
Spray NozzleFor NAC, BB, FPB,
FFB, TEP
Cap Wrenchfor AR-Y(S)
Cap Wrench(Black)
C185751
C071751
Tube (RSM) Z166101
Spare Parts
S-Max M
P1001250
P1002250
Y900580
P1001500
SX-MU03Cartridge for
Miniature head
SX-SU03Cartridge for
Standard head
PTL O-ring Set(Pack of 5)
SX-MU04Head cap for
Miniature head
P1002500SX-SU04Head cap for
Standard head
SX-SU05Head cap wrench for
Miniature head & Standard head 20000535
iPA M1020006iProphy Air
Color Ring Set(Pack of 4)
Y1002594iPA-HP M1020005
iCare
Z016130Maintenance Oil
for iCare(1 Bottle, 1 Liter)
Oil Absorber Sheet (Pack of 10)
Air Filter
U433135
U508352
Z257301
U1120118
Chuck Cleaning Nozzle
HP Head Filter (Pack of 200)
Y900159Mist Filter Set(Pack of 12)
PANA-MAX
Y900772 P074050PAX-SU03
Cartridge for standard head, includes O-ring
& wave washer
PAX-SU04Head cap for
standard head
PAX-SU05Head cap wrench for standard head
P074765
P183090Phatelus Spray NozzleFor Air driven attachments and
air motors which attach to Phatelus and Mach Coupler
Z090051KV NozzleFor KaVo® MULTIflex® LUX
Z090054WH Nozzle
For W&H® Roto Quick(RQ Type)
Z090059WHL Nozzle
For W&H® Roto Quick(RA Type)
PANA SPRAY Plus Nozzles
*E-Type: Conformable to ISO3964.
Z090060MWL NozzleFor MIDWEST® 5-Hole Coupler
Z090061STL Nozzle
For StarDental® HiFlo® Fiber-Optic Swivel
(4-Hole F.O.) Coupler
Z019090e-Type Spray Nozzle
For E-Type* attachments
Y900580PTL O-ring Set(Pack of 5)
Y900580PTL O-ring Set(Pack of 5)
Y900580PTL O-ring Set(Pack of 5)
Ti-Max Z Ti-Max X Ti-Max X450 MOdeL PROdUCTS ORdeR COde MOdeL PROdUCTS ORdeR COde MOdeL PROdUCTS ORdeR COde
KaVo® and MULTIflex® LUX are registered trademarks of Kaltenbach & Voigt GmbH & Co.Sirona® is a registered trademark of Sirona dental Systems GmbH.W&H® is a registered trademark of W&H dentalwerk Bürmoos GmbH. Bien-Air® and Unifix® are registered trademarks of Bien-Air dental S.A.MIdWeST® is a registered trademark of deNTSPLY International Inc.Stardental® and HiFlo® are registered trademarks of dentaleZ Inc.
P30-37_D718Av6_e_1502.indd 36-37 15.2.26 1:17:23 PM